Info Mining my Jetstream (hopefully helping devs root it) - HTC Jetstream
[Originally posted in Jetstream General]
So I just got mine, fresh from the store. My permanent device, not the trial unit was using.
Since I love voiding warranties (it's kind of a hobby), I'm going to muck around with the software and see what I can get into. My goal is to stumble across a root method, but I have no idea what I'm doing and will really just be lurking in IRC channels and reading other root guides to see what I can try.
Since I can't post in the development thread yet (stupid lurker status), I'm going to post relevant info here, starting with software versions running on my device.
In Bootloader, I see:
HTC PUCCINILTE PVT SHIP S-ON RL
HBOOT-1.78.0007
eMMC-boot
Standard vol-up/down and power button controls work there, which was to be expected.
Software info:
Android Version: 3.1
HTC Sense version: 1.1 for tablet
Software number: 1.17.502.3
Kernel: 2.6.35.10-g4612ecf
[email protected] #1
Baseband Version: 1.04.550I.15v2_30.60.550I.10L
Build number: 1.17.502.3CL139056 release-keys
adb shows normal information, but adb reboot recovery doesn't work (not surprising)
Running http://revolutionary.io/ shows the following:
Code:
C:\jetstream>revolutionary.exe
=============================================
| Revolutionary S-OFF & Recovery Tool 0.4pre4 |
=============================================
Brought to you by AlphaRev & unrEVOked.
Waiting for device...
Found your device: HTC PG09410 (puccinilte-1.78.0007, Android: 3.1, ROM version: 1.17.502.3)
Your device: puccinilte, with HBOOT 1.78.0007 is not supported at this time.
Booting into the bootloader and running "fastboot oem ?" provides the following:
Code:
C:\jetstream>fastboot oem ?
...
(bootloader) command list
(bootloader) get_identifier_token
(bootloader) checkSbl1
(bootloader) checkHWSecurity
(bootloader) checkKeycardID
(bootloader) enter
(bootloader) keytest
(bootloader) heap
(bootloader) boot
(bootloader) reset
(bootloader) powerdown
(bootloader) rebootRUU
(bootloader) heap_test
(bootloader) rtask
(bootloader) task
(bootloader) enableqxdm
(bootloader) gencheckpt
(bootloader) readpid
(bootloader) writepid
(bootloader) readcid
(bootloader) writecid
(bootloader) readimei
(bootloader) writeimei
(bootloader) readsecureflag
(bootloader) writesecureflag
(bootloader) lock
(bootloader) list_partition_emmc
(bootloader) load_emmc
(bootloader) check_emmc
(bootloader) check_emmc_mid
(bootloader) read_mmc
(bootloader) load_modem_emmc
(bootloader) get_wp_info_emmc
(bootloader) send_wp_info_emmc
(bootloader) get_ext_csd_emmc
(bootloader) get_sector_info_emmc
OKAY [ 0.186s]
finished. total time: 0.187s
Note that there's no "unlock" command as with the xoom. I'm wondering if it's disabled somewhere or just a file change somewhere to get the unlock option in there.
http://www.htcdev.com/bootloader/ doesn't give the option to unlock the Jetstream quite yet :-(
Pulled my build.prop:
Code:
ro.ril.enable.a52=0
ro.ril.enable.a53=1
ro.ril.enable.dtm=0
ro.ril.gprsclass=10
ro.ril.hsdpa.category=14
ro.ril.hsupa.category=6
ro.ril.hsxpa=4
ro.ril.def.agps.mode=5
ro.ril.att.feature=1
ro.ril.disable.fd.plmn.prefix=23402,23410,23411
ro.ril.enable.sdr=0
ro.ril.enable.gea3=1
ro.ril.enable.ucsq=2
ro.ril.enable.sim.hot.swap=1
ro.ril.set.mtusize=1410
ro.ril.reject.cs.ss.enabled=1
ro.ril.reject.mo.sms.enabled=0
ro.ril.reject.mo.ussd.enabled=1
persist.pdn.profile=broadband
ro.com.google.clientidbase=android-htc
ro.com.google.clientidbase.yt=android-htc
ro.com.google.clientidbase.am=android-att-us
ro.com.google.clientidbase.gmm=android-htc
ro.com.google.clientidbase.ms=android-att-us
ro.wifi.hotspotUI=0
ro.tether.denied=true
ro.product.model=HTC PG09410
ro.phone.function=0
ro.monkey=0
ro.sllowmock.location=0
# begin build properties
# autogenerated by buildinfo.sh
ro.aa.rid=191
ro.aa.skulist=502
ro.aa.customizationid=216086
ro.aa.mainsku=502
ro.aa.taskid=210183
ro.aa.romver=1.17.502.3
ro.aa.maincid=CWS__001
ro.aa.cidlist=CWS__001
ro.aa.project=Puccini_LTE
ro.aa.modelid=PG0941000
ro.build.changelist=139056
ro.com.google.clientidbase=android-att-us
ro.aa.rid=191
ro.aa.skulist=502
ro.aa.customizationid=216086
ro.aa.mainsku=502
ro.aa.taskid=210183
ro.aa.romver=1.17.502.3
ro.aa.maincid=CWS__001
ro.aa.cidlist=CWS__001
ro.aa.project=Puccini_LTE
ro.aa.modelid=PG0941000
ro.build.changelist=139056
ro.com.google.clientidbase=android-att-us
ro.build.id=HMJ15
ro.build.display.id=HMJ15
ro.build.version.incremental=137848.3
ro.build.version.sdk=12
ro.build.version.codename=REL
ro.build.version.release=3.1
ro.build.date=三 8月 17 00:02:05 CST 2011
ro.build.date.utc=1313510525
ro.build.type=user
ro.build.user=
ro.build.host=AA138
ro.build.tags=release-keys
ro.product.model=HTC PucciniLte
ro.product.brand=cingular_us
ro.product.name=htc_puccinilte
ro.product.device=puccinilte
ro.product.board=verdilte
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=HTC
ro.product.locale.language=mdpi
ro.wifi.channels=
ro.board.platform=msm8660
# ro.build.product is obsolete; use ro.product.device
ro.build.product=puccinilte
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=1.17.502.3 CL139056 release-keys
ro.build.description=1.17.502.3 CL139056 release-keys
ro.build.changelist=139056
ro.build.fingerprint=cingular_us/htc_puccinilte/puccinilte:3.1/HMJ15/137848.3:user/release-keys
ro.build.characteristics=default tablet tablet
ro.build.project=210183
ro.product.version=1.17.502.3
ro.build.languageremove=0
ro.build.sense.version=2.1
# end build properties
#
# system.prop for puccinilte
#
ro.sf.lcd_density=160
debug.fb.rgb565 = 0
ro.fb.mode = 1
#+HTC_RIL: from QCT Fusion
rild.libpath=/system/lib/libril-qc-qmi-1.so
rild.libargs=-d /dev/smd0
persist.rild.nitz_plmn=
persist.rild.nitz_long_ons_0=
persist.rild.nitz_long_ons_1=
persist.rild.nitz_long_ons_2=
persist.rild.nitz_long_ons_3=
persist.rild.nitz_short_ons_0=
persist.rild.nitz_short_ons_1=
persist.rild.nitz_short_ons_2=
persist.rild.nitz_short_ons_3=
persist.rild.ril.ltedr=0
persist.rild.ril.ltedrtable=max_retries=infinite,10000
DEVICE_PROVISIONED=1
debug.sf.hw=1
#debug.composition.type=c2d
#
# system props for the cne module
#
persist.cne.UseCne=false
persist.cne.bat.range.low.med=30
persist.cne.bat.range.med.high=60
persist.cne.loc.policy.op=/system/etc/OperatorPolicy.xml
persist.cne.loc.policy.user=/system/etc/UserPolicy.xml
persist.cne.bwbased.rat.sel=false
persist.cne.snsr.based.rat.mgt=false
persist.cne.bat.based.rat.mgt=false
persist.cne.be.ge.sqi.min=0
persist.cne.be.ge.sqi.max=100
persist.cne.be.umts.sqi.min=0
persist.cne.be.umts.sqi.max=100
persist.cne.be.hspa.sqi.min=0
persist.cne.be.hspa.sqi.max=100
persist.cne.be.1x.sqi.min=0
persist.cne.be.1x.sqi.max=100
persist.cne.be.do.sqi.min=0
persist.cne.be.do.sqi.max=100
persist.cne.be.wlan.sqi.min=0
persist.cne.be.wlan.sqi.max=100
#
# system props for the data modules
#
ro.use_data_netmgrd=true
persist.data_netmgrd_nint=11
#
# system props for telephony modules
#
#device supports LTE
ro.config.lte=true
#device supports EHRPD
#ro.config.ehrpd=true
#device supports simultaneous 1x voice + LTE
#ro.config.svlte1x=true
#-HTC_RIL: from QCT Fusion
# Modify MMS APN retry timer from 5s to 2s.
ro.gsm.2nd_data_retry_config = max_retries=3, 2000, 2000, 2000
# verdi RF team request
ro.ril.enable.dtm = 0
ro.ril.gprsclass = 12
ro.ril.hsdpa.category = 10
ro.ril.hsupa.category = 6
ro.ril.hsxpa = 3
# Default network type.
# 0 => WCDMA preferred.
ro.telephony.default_network=0
wifi.interface=eth0
wifi.supplicant_scan_interval=15
# The OpenGL ES API level that is natively supported by this device.
# This is a 16.16 fixed point number
ro.opengles.version = 131072
# This is a high density device with more memory, so larger vm heaps for it.
dalvik.vm.heapsize=256m
dalvik.vm.heapgrowthlimit=48m
# For the default value of agps
ro.ril.def.agps.mode = 2
# For HSDPA low throughput
ro.ril.disable.power.collapse = 1
# For Pyramid China NEL
ro.ril.enable.prl.recognition = 1
# For emmc phone storage
ro.phone_storage = 0
# For ext4 file system
ro.ext4fs = 1
# For FOTA setting (leave empty value to use default)
ro.htc.checkin.url = http://andchin.htc.com/android/checkin
ro.htc.checkin.crashurl = http://andchin.htc.com/android/crash
ro.htc.checkin.url_CN = http://andchin.htccomm.com.cn/android/checkin
ro.htc.checkin.crashurl_CN = http://andchin.htccomm.com.cn/android/crash
ro.htc.checkin.exmsg.url = http://fotamsg.htc.com/android/extra/
ro.htc.checkin.exmsg.url_CN = http://fotamsg.htccomm.com.cn/android/extra/
# Release Bluetooth HW/SW information
ro.bt.chipset = Broadcom BCM4329-B1
ro.bt.version = Bluetooth 2.1 + EDR
ro.bt.stack = Broadcom BTL-A
ro.bt.stack.version = 2.0.50.032
#0x10000010010100100000011 represent bt profile list
ro.bt.profiles = 4270339
# Properties of BTLA stack
service.brcm.bt.activation = 0
service.brcm.bt.srv_active = 0
service.brcm.bt.hcid_active = 0
service.brcm.bt.btld = 0
service.brcm.bt.btld_pid = 0
service.brcm.bt.bluetoothd_pid = 0
service.brcm.bt.avrcp_pass_thru = 0
service.brcm.bt.avrcp_toggle = 1
service.brcm.bt.ag_supported = 0
# Following property will be reference by Settings.
ro.product.bluetooth = 3.0
# For quick boot mode
persist.sys.shutdown.mode = hibernate
# Temporary workaround [Arthur]
# profiler.checkheap = 0
profile_freeNativeBmp = 0
# ABL
htc.abl.enable = 0
# unlock keyguard when SIM is non-inserted
keyguard.no_require_sim=1
# Dump native call stack when an ANR happens to com.htc.launcher.
profiler.anr_dump_native_uid = 9999
# Following property will be reference by Settings.
ro.product.processor = 1.5 GHz dualcore
ro.product.ram = 1GB
ro.product.display_resolution = 10.1 inch WXGA resolution
ro.product.main_camera = 8M
ro.product.front_camera = 1.3M
ro.product.bluetooth = 3.0
ro.product.wifi = 802.11 a/b/g/n
# support USB Host
ro.usb_host = 1
# For opensense sdk
ro.htc.common.version = 3.0.0.0
# For matching the sample rate of touch driver
windowsmgr.max_events_per_sec=70
# Extend key dispatching timeout
keydispatchtimeout = 15000
#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.setupwizard.mode=OPTIONAL
ro.config.ringtone=QuietlyBrilliant.mp3
ro.config.notification_sound=Zeta.mp3
ro.config.alarm_alert=NewDay.mp3
ro.config.cal_notification=Epsilon.mp3
ro.config.msg_notification=Gamma.mp3
ro.setupwizard.mode=DISABLED
ro.com.google.gmsversion=3.1_r2
htc.audio.alt.enable=1
htc.audio.hac.enable=0
drm.service.enabled=true
ro.marlin.drm.service.enabled=true
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
Interesting build.prop notes:
lines 25/26:
ro.wifi.hotspotUI=0
ro.tether.denied=true
lines 234-236 (Was Arthur supposed to fix this before release?):
# Temporary workaround [Arthur]
# profiler.checkheap = 0
profile_freeNativeBmp = 0
In watching logcat, it's constantly trying to connect to AT&T's LTE network. Except that I haven't activated the service and under System Settings I have Mobile Network disabled. I'm sure that's working out great for my battery.
Results of a "df" command in shell
Code:
$ df
df
Filesystem Size Used Free Blksize
/dev 406M 64K 406M 4096
/system 1007M 718M 289M 4096
/data 11G 390M 11G 4096
/cache 314M 5M 309M 4096
/devlog 31M 10M 21M 4096
/vendor/firmware/misc 199M 21M 178M 4096
/vendor/firmware/misc_mdm 199M 27M 171M 4096
/mnt/asec 406M 0K 406M 4096
/mnt/obb 406M 0K 406M 4096
/data/DxDrm/fuse: Permission denied
Here's a dump of /system/app/
Code:
$ ls
ls
ATTAPNWidget_1.1.63.apk
ATT_FamilyMap_stub.apk
ATT_Navigator_stub.apk
ATT_code_scanner_vpl_1.2_aligned.apk
AndroidMoviesClub_att_vpl_1.0.0.0004.apk
AndroidWispr1.17.apk
AppSharing.apk
AppSharing.odex
ApplicationsProvider.apk
ApplicationsProvider.odex
Bluetooth.apk
Bluetooth.odex
BooksTablet.apk
BrcmBluetoothServices.apk
BrcmBluetoothServices.odex
Browser.apk
Browser.odex
Burgundy.apk
CSPeopleSyncService.apk
CSPeopleSyncService.odex
Calculator.apk
Calculator.odex
Calendar.apk
Calendar.odex
CalendarProvider.apk
CalendarProvider.odex
CertInstaller.apk
CertInstaller.odex
CheckinProvider.apk
CheckinProvider.odex
ChromeBookmarksSyncAdapter.apk
ContactsProvider.apk
ContactsProvider.odex
CustomizationSettingsProvider.apk
CustomizationSettingsProvider.odex
CustomizationSetup.apk
CustomizationSetup.odex
DFPI.apk
DFPI.odex
DefaultContainerService.apk
DefaultContainerService.odex
DmClient.apk
DockMode.apk
DockMode.odex
DownloadProvider.apk
DownloadProvider.odex
DownloadProviderUi.apk
DownloadProviderUi.odex
DrmProvider.apk
DrmProvider.odex
Facebook.apk
FilePicker.apk
FilePicker.odex
Finsky.apk
Flickr.apk
Flickr.odex
FriendStream.apk
FriendStream.odex
FusionStockWidget.apk
FusionStockWidget.odex
GameWorld-1.0.7.apk
Gmail.apk
GoogleBackupTransport.apk
GoogleCalendarSyncAdapter.apk
GoogleContactsSyncAdapter.apk
GoogleFeedback.apk
GoogleLoginService.apk
GooglePartnerSetup.apk
GoogleQuickSearchBox.apk
GoogleServicesFramework.apk
GreenImmersion.apk
HTCAlbum.apk
HTCAlbum.odex
HTCCamera.apk
HTCCamera.odex
HTCLivewallpaperStreak.apk
HTCLivewallpaperStreak.odex
HTCPDFViewer.apk
HTCPDFViewer.odex
HTCSetupWizard.apk
HTCSetupWizard.odex
HTCSync.apk
HTC_IME.apk
HTC_IME.odex
HTMLViewer.apk
HTMLViewer.odex
HoloSpiralWallpaper.apk
HoloSpiralWallpaper.odex
HomePersonalize.apk
HomePersonalize.odex
HtcAutoRotateWidget.apk
HtcAutoRotateWidget.odex
HtcBackgroundDataWidget.apk
HtcBackgroundDataWidget.odex
HtcCalculatorWidget.apk
HtcCalculatorWidget.odex
HtcClock3DWidget.apk
HtcClock3DWidget.odex
HtcCompressViewer.apk
HtcCompressViewer.odex
HtcConnectedMedia.apk
HtcConnectedMedia.odex
HtcContacts.apk
HtcContacts.odex
HtcDLNAMiddleLayer.apk
HtcDLNAMiddleLayer.odex
HtcDMC.apk
HtcDMC.odex
HtcDataRoamingWidget.apk
HtcDataRoamingWidget.odex
HtcDataStripWidget.apk
HtcDataStripWidget.odex
HtcDialer.apk
HtcDialer.odex
HtcDirect.apk
HtcDirect.odex
HtcDm.apk
HtcDm.odex
HtcDmSettingWidget.apk
HtcDmSettingWidget.odex
HtcFacebook.apk
HtcFacebook.odex
HtcFeedback.apk
HtcFeedback.odex
HtcFootprints.apk
HtcFootprints.odex
HtcFootprintsWidget3d.apk
HtcFootprintsWidget3d.odex
HtcGreader.apk
HtcGreader.odex
HtcGreaderWidget.apk
HtcGreaderWidget.odex
HtcHubSyncProvider.apk
HtcHubSyncProvider.odex
HtcImageWallpaper.apk
HtcImageWallpaper.odex
HtcLocationPicker.apk
HtcLocationPicker.odex
HtcLocationService.apk
HtcLocationService.odex
HtcLockScreen.apk
HtcLockScreen.odex
HtcLoggers.apk
HtcLoggers.odex
HtcMessageProvider.apk
HtcMessageProvider.odex
HtcMessageUploader.apk
HtcMessageUploader.odex
HtcMusic.apk
HtcMusic.odex
HtcMusicEnhancer.apk
HtcMusicEnhancer.odex
HtcMusicMarkedItems.apk
HtcMusicMarkedItems.odex
HtcNotes.apk
HtcNotes.odex
HtcNotesProvider.apk
HtcNotesProvider.odex
HtcPhotoGridWidget3D.apk
HtcPhotoGridWidget3D.odex
HtcPhotoWidget.apk
HtcPhotoWidget.odex
HtcPowerStripWidget.apk
HtcPowerStripWidget.odex
HtcProfileWidget.apk
HtcProfileWidget.odex
HtcRecommends.apk
HtcRecommends.odex
HtcRecommendsWidget.apk
HtcRecommendsWidget.odex
HtcResetNotify.apk
HtcResetNotify.odex
HtcRichNotesWidget3D.apk
HtcRichNotesWidget3D.odex
HtcScreenBrightnessWidget.apk
HtcScreenBrightnessWidget.odex
HtcScreenTimeoutWidget.apk
HtcScreenTimeoutWidget.odex
HtcSettingsProvider.apk
HtcSettingsProvider.odex
HtcSoundRecorder.apk
HtcSoundRecorder.odex
HtcSoundSetDownloadManager.apk
HtcSoundSetDownloadManager.odex
HtcStreamPlayer.apk
HtcStreamPlayer.odex
HtcTipWidget.apk
HtcTipWidget.odex
HtcTwitter.apk
HtcTwitter.odex
HtcWeather3DWidget.apk
HtcWeather3DWidget.odex
HtcWeatherWallpaper.apk
HtcWeatherWallpaper.odex
IdleScreen_Weather.apk
IdleScreen_Weather.odex
Idlescreen_Base.apk
Idlescreen_Base.odex
JETCET_PRINT_Resources.apk
JETCET_PRINT_T11.apk
KidMode.apk
Kindle_STUB.apk
LGolf2HD_HEP_HTC_Puccini_ATT_ML_102.apk
LMW.apk
LMW.odex
LiveWallpapersPicker.apk
LiveWallpapersPicker.odex
Mail.apk
Mail.odex
Maps.apk
MarketUpdater.apk
MediaProvider.apk
MediaProvider.odex
MediaUploader.apk
MyHTC.apk
MyHTC.odex
MyPen.apk
MyPen.odex
MyPenTips.apk
MyPenTips.odex
MyReportAgent.apk
MyReportAgent.odex
MySketcher.apk
MySketcher.odex
NFSShift_signed_submission.apk
NetworkLocation.apk
OneTimeInitializer.apk
OnlineAssetDetails.apk
OnlineAssetDetails.odex
PCSC.apk
PCSC.odex
PCSCSettingWidget.apk
PCSCSettingWidget.odex
PRAndroid.apk
PackageInstaller.apk
PackageInstaller.odex
Phone.apk
Phone.odex
PicoTts.apk
PicoTts.odex
PluginManager.apk
PluginManager.odex
PolarisOffice.apk
QXDM2SD.apk
QXDM2SD.odex
QuickLookup.apk
QuickLookup.odex
Rosie.apk
Rosie.odex
Settings.apk
Settings.odex
SettingsProvider.apk
SettingsProvider.odex
SetupWizard.apk
SoundHound_Freemium.apk
Stk.apk
Stk.odex
Stock.apk
Stock.odex
Street.apk
SystemUI.apk
SystemUI.odex
Talk.apk
TaskManager.apk
TaskManager.odex
TelephonyProvider.apk
TelephonyProvider.odex
Transfer-puccini-8.31.0.40-Stablet11.apk
TrimIt.apk
TtsService.apk
TtsService.odex
Twitter.apk
Updater.apk
Updater.odex
UpgradeSetup.apk
UpgradeSetup.odex
UploadProvider.apk
UploadProvider.odex
UserDictionaryProvider.apk
UserDictionaryProvider.odex
Vending.apk
VoiceSearch.apk
WatchApp.apk
WatchApp.odex
Weather.apk
Weather.odex
WeatherAgentService.apk
WeatherAgentService.odex
WeatherLiveWallpaper.apk
WeatherLiveWallpaper.odex
WeatherProvider.apk
WeatherProvider.odex
WeatherSyncProvider.apk
WeatherSyncProvider.odex
WifiRouter.apk
WifiRouter.odex
WorldClock.apk
WorldClock.odex
YPMAndroid_VPL-release_287.apk
YouTubeTablet.apk
ZinioReader.v1.01.3587.VPL.apk
com.htc.FriendStream3DWidget.apk
com.htc.FriendStream3DWidget.odex
com.htc.MusicWidget.apk
com.htc.MusicWidget.odex
com.htc.Sync3DWidget.apk
com.htc.Sync3DWidget.odex
com.htc.TrendsWidget.apk
com.htc.TrendsWidget.odex
com.htc.Twitter3DWidget.apk
com.htc.Twitter3DWidget.odex
fusion.apk
fusion.odex
htcbookmarkwidget3d.apk
htcbookmarkwidget3d.odex
htccalendarwidgets3d.apk
htccalendarwidgets3d.odex
htccontactwidgets3D.apk
htccontactwidgets3D.odex
htcmailwidgets3d.apk
htcmailwidgets3d.odex
htcsettingwidgets.apk
htcsettingwidgets.odex
htcwatchwidget3d.apk
htcwatchwidget3d.odex
idlescreen_blank.apk
idlescreen_blank.odex
idlescreen_shortcut.apk
idlescreen_shortcut.odex
install_flash_player.apk
myATTWebLaunch_v2_aligned.apk
restartapp.apk
restartapp.odex
tabletv2-98_aligned.apk
teeter.apk
teeter.odex
Here's a dump of /system/bin/
Code:
$ cd bin
cd bin
$ ls
ls
3D_calibration
DmWrapperTest
DxDrmServerIpc
PktRspTest
adb
akmd
am
app_process
applypatch
ash
awb_camera
bluetoothd
bma150_usr
bmgr
bootanimation
bootcomplete
btld
bugreport
cam_ins_spmo
cat
charging
chmod
chown
cmp
dalvikvm
date
dbus-daemon
dcvs
dcvsd
dd
debuggerd
dexopt
df
dhcpcd
diag_klog
diag_mdlog
dmagent
dmesg
dnsmasq
drmserver
ds_fmc_appd
dumpstate
dumpsys
fsck_msdos
fusermount
getevent
getprop
gzip
hciattach
hd
hdmid
htc_ebdlogd
htc_ext4_fsck
htcfs
id
ifconfig
iftop
ime
input
insmod
installd
ioctl
ionice
ip
ipd
iptables
keystore
kill
ks
linker
ln
load-modem.sh
log
logcat
logcat2
logwrapper
ls
lsc_camera
lsmod
lsof
make_ext4fs
mediaserver
mkdir
mm-audio-acdb-test
mm-audio-alsa-test
mm-jpeg-dec-test
mm-jpeg-enc-test
mm-qcamera-testsuite-client
mm-qcamera-testsuite-client-aw
mm-vdec-omx-test
mm-venc-omx-test720p
mm-video-driver-test
mm-video-encdrv-test
mmcamera_test
monkey
mount
mpdecision
mtpd
mv
nandread
ndc
netcfg
netd
netmgrd
netsharing
netstat
newfs_msdos
nl_listener
notify
ntrig_touchd
omx_tests
pand
ping
pm
port-bridge
pppd
printenv
ps
qcks
qmiproxy
qmuxd
racoon
ramdump-9K.sh
ramdump2sd-9K.sh
reboot
renice
rild
rm
rmdir
rmmod
rmt_storage
route
run-as
schedtest
schedtop
screencap
screenshot
sdcard
sdptool
sendevent
service
servicemanager
setconsole
setprop
sh
shutdown
simg2img
sleep
smd
sound8x60
start
stop
surfaceflinger
svc
sync
system_server
tc
test_diag
test_gemini
thermald
toolbox
top
udhcpd
umount
uptime
usbhub
usbhub_init
vdc
vmstat
vold
watchprops
wipe
wpa_supplicant
zchgd
File dump of /dev/
Code:
cd /dev
$ ls
ls
akm8975_aot
akm8975_daemon
alarm
android_adb
android_adb_enable
android_mtp_tunnel
ashmem
audience_a1028
binder
block
bma150
bthid
codec_aic3254
console
cpu_dma_latency
cpuctl
device-mapper
diag
diag_arm9
diag_mdm
dsp_debug
full
fuse
gemini0
graphics
htc-acoustic
htc-portlist
htc_simhotswap
htcdiag
hw_random
i2c-1
i2c-4
i2c-5
input
keychord
kgsl-2d0
kgsl-2d1
kgsl-3d0
kmsg
lightsensor
log
mdm
msm_aac
msm_aac_in
msm_acdb
msm_adc
msm_amrnb_in
msm_audio_dev_ctrl
msm_camera
msm_dsps
msm_evrc_in
msm_fm
msm_mvs
msm_pcm_in
msm_pcm_lp_dec
msm_pcm_out
msm_qcelp_in
msm_rotator
msm_vidc_dec
msm_vidc_enc
msm_vidc_reg
msm_wma
msm_wmapro
network_latency
network_throughput
ntrig_touch
null
oncrpc
perflock
pmem
pmem_adsp
pmem_audio
pmem_smipool
ppp
ptmx
pts
radio_feedback
random
rfkill
rmt_storage
rtc0
sdio_al_test
sdioctl0
sdioctl1
sdioctl2
sdioctl3
sdioctl4
sdioctl5
sdioctl6
sdioctl7
sdioctl8
sdiotty0
simlock
smd0
smd21
smd22
smd27
smd36
smd7
smd9
smd_pkt_loopback
smd_sns_dsps
smdcntl0
smdcntl1
smdcntl2
smdcntl3
smdcntl4
smdcntl5
smdcntl6
smdcntl7
snd
socket
system_bus_freq
tpa2026
tpa2028
tty
ttyHS0
ttyHSL0
ttyHSL1
ttyHSUSB0
ttyHSUSB1
ttyHSUSB2
ttyntrig-debug
tun
uinput
urandom
usb_accessory
zero
$
I've joined (and am the only person in) #jetstreamdev on freenode IRC. Come find me there if you want to work with me interactively on this
That's all I've got so far. I'm going to keep digging around in here with adb and such. If anybody has an suggestions (and real devs want to provide insight?) I'll gladly try things out.
Great start looks like there is some telephony built-in as well.
Just got off the phone with HTC, they said that their internal policy is to have the bootloader unlock method on their dev site within 180 days of the device launch.
So, failing the community finding it, HTC will unlock it within the next 5 months.
I've also got a call in to their development team to ask about the process early, we'll see if that gets me anywhere.
Anybody have any other suggestions?
Sent from my HTC PG09410 using XDA App
cabbykins said:
Just got off the phone with HTC, they said that their internal policy is to have the bootloader unlock method on their dev site within 180 days of the device launch.
So, failing the community finding it, HTC will unlock it within the next 5 months.
I've also got a call in to their development team to ask about the process early, we'll see if that gets me anywhere.
Anybody have any other suggestions?
Sent from my HTC PG09410 using XDA App
Click to expand...
Click to collapse
I was talking in a chat with the guys who made Revolutionary a few weeks ago as I got my jetstream on launch day and gave them some info from it. They believe the bootloader version was to old to support the website unlock.
INFOversion: 0.5
INFOversion-bootloader: 1.78.0007
INFOversion-baseband: N/A
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 1.17.502.3
INFOserialno: HT18SVD00***
INFOimei: 3571210400*****
INFOproduct: puccinilte
INFOplatform: HBOOT-8260
INFOmodelid: PG0941000
INFOcidnum: CWS__001
INFObattery-status: good
INFObattery-voltage: 3687mV
INFOpartition-layout: Generic
INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: 8ebb8b6c
INFOhbootpreupdate: 11
INFOgencheckpt: 0
- Dan
Well I tried some stuff to root it, but got no luck...
Guys did you got the big "*** LOCKED ***" written inside your HBOOT?
I think that the only persons who will be able to help us is Revolutionary team...
Hope someone cracks the code to root it.
BIGMOH said:
Hope someone cracks the code to root it.
Click to expand...
Click to collapse
I think I just hit a gold mine. I got my hands on a developers Htc jetstream. It's already rooted, with dev tools. I won't leak too much, and considering I don't have access to a USB cable I don't believe I'll be able to info mine. But hopefully this helps.
Some preliminary stuff:
Android Version: 3.1
HTC Sense: 1.1 for tablet
Software version: 1.20.0.0
Kernal Version: [email protected]*snipped* (has information regarding this device, and which one it is) it was built last week of August.
Build number 1.20.0.0
Info from root check.
Congratulations! You have root access!
Superuser.apk - com.noshufou.android.su - version 3.0.2 is installed!
System Environment PATH: /sbin /vendor/bin /system/sbin /system/bin /system/xbin
The adb binary is set to default shell user access as root
Standard su binary location: ls -l /system/bin/su:
/system/bin/su: No such file or directory
Standard su binary location: ls -l /system/xbin/su:
-rwsr-sr-x root root 22228 2011-10-06 23:54 su
Alternate su binary location:
/sbin/su: Permission denied
Alternate su type binary location:
/system/xbin/sudo: No such file or directory
Root user id:
uid=0(root)
Root group id:
gid=0(root)
Results provided on your HTC PG09410 device by Root Checker version
3.7 from joeykrim in the Android Market - http://goo.gl/GgWae
Awesome, cookiesowns! What are the chances you will be able to get at it with a USB cable to grab as much data as possible?
cabbykins said:
Awesome, cookiesowns! What are the chances you will be able to get at it with a USB cable to grab as much data as possible?
Click to expand...
Click to collapse
Well, I'll only be playing with the stream for a short days, and the cable is quite expensive. Plus, it's a HTC dev machine, and I can already tell the firmware, kernal, and what not has tag keys, so HTC can track down which machine it was leaked from.
Does anyone know how to access the bootloader though? I tried volume up, down, and both, doesn't seem to enter boot loader.
Volume down during a reboot gets me into fastboot, from there it has an option to reboot into a very basic recovery. Of.coure, using a usb cable with adb works as well.
Does the dev unit not use a normal micro usb cable? I know the cable it comes with looks funny, but a normal micro usb cable works fine as well.
Sent from my HTC PG09410 using XDA App
cabbykins said:
Volume down during a reboot gets me into fastboot, from there it has an option to reboot into a very basic recovery. Of.coure, using a usb cable with adb works as well.
Does the dev unit not use a normal micro usb cable? I know the cable it comes with looks funny, but a normal micro usb cable works fine as well.
Sent from my HTC PG09410 using XDA App
Click to expand...
Click to collapse
Your right. It does work! my Micro USB from my HD2 works, and I'm in bootloader! Jack pot! hopefully you're on irc, as this is new waters for me.
*** LOCKED ***
PUCCINILTE PVT ENG S-OFF RH
HBOOT-1.78.2010
eMMC-boot
Aug 30 2011
C:\Windows\system32>cd C:/Jetstream
C:\Jetstream>revolutionary.exe
=============================================
| Revolutionary S-OFF & Recovery Tool 0.4pre4 |
=============================================
Brought to you by AlphaRev & unrEVOked.
Waiting for device...
Found your device: HTC PG09410 (puccinilte-1.78.2010, Android: 3.1, ROM version:
1.20.0.0)
Your device is already S-OFF, what exactly do you think you're doing? Not settin
g S-OFF.
Do you want to download (Internet connection required) and flash ClockworkMod Re
covery? [Y/n]
Code:
A ls command on /dev/
# ls
ls
akm8975_aot
akm8975_daemon
alarm
android_adb
android_adb_enable
android_mtp_tunnel
ashmem
audience_a1028
binder
block
bma150
bthid
codec_aic3254
console
cpu_dma_latency
cpuctl
device-mapper
diag
diag_arm9
diag_mdm
dsp_debug
full
fuse
gemini0
graphics
htc-acoustic
htc-portlist
htc_simhotswap
htcdiag
htcdrm
hw_random
i2c-1
i2c-4
i2c-5
input
keychord
kgsl-2d0
kgsl-2d1
kgsl-3d0
kmsg
lightsensor
log
mdm
msm_aac
msm_aac_in
msm_acdb
msm_adc
msm_amrnb_in
msm_audio_dev_ctrl
msm_camera
msm_dsps
msm_evrc_in
msm_fm
msm_mvs
msm_pcm_in
msm_pcm_lp_dec
msm_pcm_out
msm_qcelp_in
msm_rotator
msm_vidc_dec
msm_vidc_enc
msm_vidc_reg
msm_wma
msm_wmapro
network_latency
network_throughput
ntrig_analysis
ntrig_touch
null
oncrpc
perflock
pmem
pmem_adsp
pmem_audio
pmem_smipool
ppp
ptmx
pts
radio_feedback
random
rfkill
rmt_storage
rtc0
sdio_al_test
sdioctl0
sdioctl1
sdioctl2
sdioctl3
sdioctl4
sdioctl5
sdioctl6
sdioctl7
sdioctl8
sdiotty0
simlock
smd0
smd21
smd22
smd27
smd36
smd7
smd9
smd_pkt_loopback
smd_sns_dsps
smdcntl0
smdcntl1
smdcntl2
smdcntl3
smdcntl4
smdcntl5
smdcntl6
smdcntl7
snd
socket
system_bus_freq
tpa2026
tpa2028
tty
ttyHS0
ttyHSL0
ttyHSL1
ttyHSUSB0
ttyHSUSB1
ttyHSUSB2
ttyntrig-debug
tun
uinput
urandom
usb_accessory
zero
This is where it gets interesting. "Fastboot oem ?"
Code:
C:\platform-tools>fastboot oem ?
...
(bootloader) command list
(bootloader) mb
(bootloader) mh
(bootloader) mw
(bootloader) ew
(bootloader) eh
(bootloader) eb
(bootloader) mmu
(bootloader) ram_test
(bootloader) jump
(bootloader) test
(bootloader) sdtest
(bootloader) eraseconfig
(bootloader) writeconfig
(bootloader) readconfig
(bootloader) writesku
(bootloader) readsku
(bootloader) rflash
(bootloader) tflash
(bootloader) block_test
(bootloader) partition_test
(bootloader) rbchk
(bootloader) erasesd
(bootloader) btrouter
(bootloader) nfcrouter
(bootloader) nfcreader
(bootloader) nfccard
(bootloader) nfcversion
(bootloader) nfcdl
(bootloader) tick
(bootloader) heaptable
(bootloader) sysinfo
(bootloader) emapi
(bootloader) emapiTest
(bootloader) emapiCountryID
(bootloader) emapiWlanMac
(bootloader) emapiSetDefCal
(bootloader) emapiReadCal
(bootloader) emapiReadbtaddr
(bootloader) lr
(bootloader) imgcrc
(bootloader) resetautoimage
(bootloader) resetpreferdiag
(bootloader) resetRUUflag
(bootloader) writeserialno
(bootloader) readserialno
(bootloader) battcheck
(bootloader) enter
(bootloader) gotofastboot
(bootloader) gotohboot
(bootloader) writemid
(bootloader) usbtestmode
(bootloader) eraseWifiFlash
(bootloader) erase
(bootloader) readmbserialno
(bootloader) listpartition
(bootloader) erasebcid
(bootloader) writebcid
(bootloader) readbcid
(bootloader) fmrouter
(bootloader) fmtx
(bootloader) resetuP
(bootloader) bdaddress
(bootloader) readbdaddr
(bootloader) resetgift
(bootloader) wMfgTp
(bootloader) rMfgTp
(bootloader) emptypagecheck
(bootloader) saveprt2sd
(bootloader) savemem2sd
(bootloader) savefb2sd
(bootloader) emapiInit
(bootloader) emapiChannel
(bootloader) emapiBand
(bootloader) emapiRate
(bootloader) emapiRateset
(bootloader) emapiCountry
(bootloader) emapiTXpwr1
(bootloader) emapiPkteng_start
(bootloader) emapiPkteng_stop
(bootloader) emapiOut
(bootloader) emapiFqacurcy
(bootloader) emapiCrsuprs
(bootloader) emapiUp
(bootloader) emapiDown
(bootloader) emapiMpc
(bootloader) emapiCounters
(bootloader) emapiVersion
(bootloader) emapiEtheraddr
(bootloader) emapinRate
(bootloader) emapiSetIrqPin
(bootloader) usblog
(bootloader) bkflash2emmc
(bootloader) fl
(bootloader) loaddiag
(bootloader) lnb
(bootloader) init_a1026_fw
(bootloader) checkKeyCard
(bootloader) loopback
(bootloader) spitest
(bootloader) i2ctest
(bootloader) pmic8058_led_test
(bootloader) ats
(bootloader) gpiow
(bootloader) gpior
(bootloader) clock
(bootloader) i2cr
(bootloader) i2cw
(bootloader) i2ctest
(bootloader) ulpi
(bootloader) changeCid
(bootloader) powertest
(bootloader) read_l2_acc_fuse
(bootloader) ltetest
(bootloader) sdio_loopback
(bootloader) sdio_setsize
(bootloader) sdio_readblk
(bootloader) sdio_writeblk
(bootloader) sdio_readblk
(bootloader) sdio_dumpreg
(bootloader) get_mdm9k_serial
(bootloader) clear_mdm9k_serial
(bootloader) set_mdm9k_serial
(bootloader) update_prkey
(bootloader) emmc_boot
(bootloader) 8x60i2cr
(bootloader) 8x60i2crNoAddr
(bootloader) 8x60i2cwNoAddr
(bootloader) 8x60i2cw
(bootloader) poweron
(bootloader) poweroff
(bootloader) setvol
(bootloader) spi
(bootloader) fat
(bootloader) pmgpiow
(bootloader) pmgpior
(bootloader) 8058vregon
(bootloader) 8058vregoff
(bootloader) 8058vregw
(bootloader) 8058vregr
(bootloader) 8901vregon
(bootloader) 8901vregoff
(bootloader) 8901vregw
(bootloader) 8901vregr
(bootloader) mipi_test
(bootloader) chargeron
(bootloader) chargeroff
(bootloader) adc
(bootloader) readsimlocktype
(bootloader) enablesimlock
(bootloader) addsimlockcode
(bootloader) clearsimlockcode
(bootloader) listsimlockcode
(bootloader) clearunlockrecord
(bootloader) lite_heap_test
(bootloader) vibrate_test
(bootloader) getrtc
(bootloader) setrtc
(bootloader) getrtcalarm
(bootloader) setrtcalarm
(bootloader) pgfs
(bootloader) bumpclk
(bootloader) acpuclk_get
(bootloader) acpuclk_set
(bootloader) rpmclk_set
(bootloader) rpmclk_get
(bootloader) oschalt
(bootloader) tz_req
(bootloader) blow_efuse
(bootloader) blow_qfuse_cfg
(bootloader) dump_tzlog
(bootloader) fdisk_emmc
(bootloader) set_partition_emmc
(bootloader) erase_emmc
(bootloader) test_emmc
(bootloader) sector_erase_emmc
(bootloader) fat_format_emmc
(bootloader) init_emmc
(bootloader) reinit_emmc
(bootloader) write_mmc
(bootloader) set_wp_emmc
(bootloader) write_prot_test
(bootloader) clear_wp_emmc
(bootloader) set_enh_area_emmc
(bootloader) ntrigsetcal
(bootloader) get_identifier_token
(bootloader) checkSbl1
(bootloader) checkHWSecurity
(bootloader) checkKeycardID
(bootloader) enter
(bootloader) keytest
(bootloader) heap
(bootloader) boot
(bootloader) reset
(bootloader) powerdown
(bootloader) rebootRUU
(bootloader) heap_test
(bootloader) rtask
(bootloader) task
(bootloader) enableqxdm
(bootloader) gencheckpt
(bootloader) readpid
(bootloader) writepid
(bootloader) readcid
(bootloader) writecid
(bootloader) readimei
(bootloader) writeimei
(bootloader) readsecureflag
(bootloader) writesecureflag
(bootloader) lock
(bootloader) list_partition_emmc
(bootloader) load_emmc
(bootloader) check_emmc
(bootloader) check_emmc_mid
(bootloader) read_mmc
(bootloader) load_modem_emmc
(bootloader) get_wp_info_emmc
(bootloader) send_wp_info_emmc
(bootloader) get_ext_csd_emmc
(bootloader) get_sector_info_emmc
OKAY [ 0.225s]
finished. total time: 0.226s
Wow, your fastboot oem command has a lot more options. I'm in IRC now, but don't know how much help I can be, as I'm just getting into this scene myself. I'll be on for the rest of the day, tomorrow is looking bad for my schedule (flying to memphis to set up a convention, then flying back home tomorrow night fir surgery wednesday).
Once thursday rolls around, though, I should have plenty of time to sit around and use the computer :-D
it would be awesome if there was a way to rip and download just that S-OFF bootloader from the device...
AEDan1977 said:
it would be awesome if there was a way to rip and download just that S-OFF bootloader from the device...
Click to expand...
Click to collapse
Indeed, but we would still need to figure out a way to unlock the device before we could think about flashing the bootloader. I didn't see the unlock command in cookiesowns' "fastboot oem" command still, or anything that looked like it might work.
cabbykins said:
Indeed, but we would still need to figure out a way to unlock the device before we could think about flashing the bootloader. I didn't see the unlock command in cookiesowns' "fastboot oem" command still, or anything that looked like it might work.
Click to expand...
Click to collapse
that's possibily because the bootloader on the puccini doesn't support htc's website unlock tool... like not that it doesn't at the moment, but rather it can't and will not.
---------- Post added at 08:52 PM ---------- Previous post was at 08:47 PM ----------
cookiesowns said:
Your right. It does work! my Micro USB from my HD2 works, and I'm in bootloader! Jack pot! hopefully you're on irc, as this is new waters for me.
*** LOCKED ***
PUCCINILTE PVT ENG S-OFF RH
HBOOT-1.78.2010
eMMC-boot
Aug 30 2011
C:\Windows\system32>cd C:/Jetstream
C:\Jetstream>revolutionary.exe
=============================================
| Revolutionary S-OFF & Recovery Tool 0.4pre4 |
=============================================
Brought to you by AlphaRev & unrEVOked.
Waiting for device...
Found your device: HTC PG09410 (puccinilte-1.78.2010, Android: 3.1, ROM version:
1.20.0.0)
Your device is already S-OFF, what exactly do you think you're doing? Not settin
g S-OFF.
Do you want to download (Internet connection required) and flash ClockworkMod Re
covery? [Y/n]
Code:
A ls command on /dev/
# ls
ls
akm8975_aot
akm8975_daemon
alarm
android_adb
android_adb_enable
android_mtp_tunnel
ashmem
audience_a1028
binder
block
bma150
bthid
codec_aic3254
console
cpu_dma_latency
cpuctl
device-mapper
diag
diag_arm9
diag_mdm
dsp_debug
full
fuse
gemini0
graphics
htc-acoustic
htc-portlist
htc_simhotswap
htcdiag
htcdrm
hw_random
i2c-1
i2c-4
i2c-5
input
keychord
kgsl-2d0
kgsl-2d1
kgsl-3d0
kmsg
lightsensor
log
mdm
msm_aac
msm_aac_in
msm_acdb
msm_adc
msm_amrnb_in
msm_audio_dev_ctrl
msm_camera
msm_dsps
msm_evrc_in
msm_fm
msm_mvs
msm_pcm_in
msm_pcm_lp_dec
msm_pcm_out
msm_qcelp_in
msm_rotator
msm_vidc_dec
msm_vidc_enc
msm_vidc_reg
msm_wma
msm_wmapro
network_latency
network_throughput
ntrig_analysis
ntrig_touch
null
oncrpc
perflock
pmem
pmem_adsp
pmem_audio
pmem_smipool
ppp
ptmx
pts
radio_feedback
random
rfkill
rmt_storage
rtc0
sdio_al_test
sdioctl0
sdioctl1
sdioctl2
sdioctl3
sdioctl4
sdioctl5
sdioctl6
sdioctl7
sdioctl8
sdiotty0
simlock
smd0
smd21
smd22
smd27
smd36
smd7
smd9
smd_pkt_loopback
smd_sns_dsps
smdcntl0
smdcntl1
smdcntl2
smdcntl3
smdcntl4
smdcntl5
smdcntl6
smdcntl7
snd
socket
system_bus_freq
tpa2026
tpa2028
tty
ttyHS0
ttyHSL0
ttyHSL1
ttyHSUSB0
ttyHSUSB1
ttyHSUSB2
ttyntrig-debug
tun
uinput
urandom
usb_accessory
zero
This is where it gets interesting. "Fastboot oem ?"
Code:
C:\platform-tools>fastboot oem ?
...
(bootloader) command list
(bootloader) mb
(bootloader) mh
(bootloader) mw
(bootloader) ew
(bootloader) eh
(bootloader) eb
(bootloader) mmu
(bootloader) ram_test
(bootloader) jump
(bootloader) test
(bootloader) sdtest
(bootloader) eraseconfig
(bootloader) writeconfig
(bootloader) readconfig
(bootloader) writesku
(bootloader) readsku
(bootloader) rflash
(bootloader) tflash
(bootloader) block_test
(bootloader) partition_test
(bootloader) rbchk
(bootloader) erasesd
(bootloader) btrouter
(bootloader) nfcrouter
(bootloader) nfcreader
(bootloader) nfccard
(bootloader) nfcversion
(bootloader) nfcdl
(bootloader) tick
(bootloader) heaptable
(bootloader) sysinfo
(bootloader) emapi
(bootloader) emapiTest
(bootloader) emapiCountryID
(bootloader) emapiWlanMac
(bootloader) emapiSetDefCal
(bootloader) emapiReadCal
(bootloader) emapiReadbtaddr
(bootloader) lr
(bootloader) imgcrc
(bootloader) resetautoimage
(bootloader) resetpreferdiag
(bootloader) resetRUUflag
(bootloader) writeserialno
(bootloader) readserialno
(bootloader) battcheck
(bootloader) enter
(bootloader) gotofastboot
(bootloader) gotohboot
(bootloader) writemid
(bootloader) usbtestmode
(bootloader) eraseWifiFlash
(bootloader) erase
(bootloader) readmbserialno
(bootloader) listpartition
(bootloader) erasebcid
(bootloader) writebcid
(bootloader) readbcid
(bootloader) fmrouter
(bootloader) fmtx
(bootloader) resetuP
(bootloader) bdaddress
(bootloader) readbdaddr
(bootloader) resetgift
(bootloader) wMfgTp
(bootloader) rMfgTp
(bootloader) emptypagecheck
(bootloader) saveprt2sd
(bootloader) savemem2sd
(bootloader) savefb2sd
(bootloader) emapiInit
(bootloader) emapiChannel
(bootloader) emapiBand
(bootloader) emapiRate
(bootloader) emapiRateset
(bootloader) emapiCountry
(bootloader) emapiTXpwr1
(bootloader) emapiPkteng_start
(bootloader) emapiPkteng_stop
(bootloader) emapiOut
(bootloader) emapiFqacurcy
(bootloader) emapiCrsuprs
(bootloader) emapiUp
(bootloader) emapiDown
(bootloader) emapiMpc
(bootloader) emapiCounters
(bootloader) emapiVersion
(bootloader) emapiEtheraddr
(bootloader) emapinRate
(bootloader) emapiSetIrqPin
(bootloader) usblog
(bootloader) bkflash2emmc
(bootloader) fl
(bootloader) loaddiag
(bootloader) lnb
(bootloader) init_a1026_fw
(bootloader) checkKeyCard
(bootloader) loopback
(bootloader) spitest
(bootloader) i2ctest
(bootloader) pmic8058_led_test
(bootloader) ats
(bootloader) gpiow
(bootloader) gpior
(bootloader) clock
(bootloader) i2cr
(bootloader) i2cw
(bootloader) i2ctest
(bootloader) ulpi
(bootloader) changeCid
(bootloader) powertest
(bootloader) read_l2_acc_fuse
(bootloader) ltetest
(bootloader) sdio_loopback
(bootloader) sdio_setsize
(bootloader) sdio_readblk
(bootloader) sdio_writeblk
(bootloader) sdio_readblk
(bootloader) sdio_dumpreg
(bootloader) get_mdm9k_serial
(bootloader) clear_mdm9k_serial
(bootloader) set_mdm9k_serial
(bootloader) update_prkey
(bootloader) emmc_boot
(bootloader) 8x60i2cr
(bootloader) 8x60i2crNoAddr
(bootloader) 8x60i2cwNoAddr
(bootloader) 8x60i2cw
(bootloader) poweron
(bootloader) poweroff
(bootloader) setvol
(bootloader) spi
(bootloader) fat
(bootloader) pmgpiow
(bootloader) pmgpior
(bootloader) 8058vregon
(bootloader) 8058vregoff
(bootloader) 8058vregw
(bootloader) 8058vregr
(bootloader) 8901vregon
(bootloader) 8901vregoff
(bootloader) 8901vregw
(bootloader) 8901vregr
(bootloader) mipi_test
(bootloader) chargeron
(bootloader) chargeroff
(bootloader) adc
(bootloader) readsimlocktype
(bootloader) enablesimlock
(bootloader) addsimlockcode
(bootloader) clearsimlockcode
(bootloader) listsimlockcode
(bootloader) clearunlockrecord
(bootloader) lite_heap_test
(bootloader) vibrate_test
(bootloader) getrtc
(bootloader) setrtc
(bootloader) getrtcalarm
(bootloader) setrtcalarm
(bootloader) pgfs
(bootloader) bumpclk
(bootloader) acpuclk_get
(bootloader) acpuclk_set
(bootloader) rpmclk_set
(bootloader) rpmclk_get
(bootloader) oschalt
(bootloader) tz_req
(bootloader) blow_efuse
(bootloader) blow_qfuse_cfg
(bootloader) dump_tzlog
(bootloader) fdisk_emmc
(bootloader) set_partition_emmc
(bootloader) erase_emmc
(bootloader) test_emmc
(bootloader) sector_erase_emmc
(bootloader) fat_format_emmc
(bootloader) init_emmc
(bootloader) reinit_emmc
(bootloader) write_mmc
(bootloader) set_wp_emmc
(bootloader) write_prot_test
(bootloader) clear_wp_emmc
(bootloader) set_enh_area_emmc
(bootloader) ntrigsetcal
(bootloader) get_identifier_token
(bootloader) checkSbl1
(bootloader) checkHWSecurity
(bootloader) checkKeycardID
(bootloader) enter
(bootloader) keytest
(bootloader) heap
(bootloader) boot
(bootloader) reset
(bootloader) powerdown
(bootloader) rebootRUU
(bootloader) heap_test
(bootloader) rtask
(bootloader) task
(bootloader) enableqxdm
(bootloader) gencheckpt
(bootloader) readpid
(bootloader) writepid
(bootloader) readcid
(bootloader) writecid
(bootloader) readimei
(bootloader) writeimei
(bootloader) readsecureflag
(bootloader) writesecureflag
(bootloader) lock
(bootloader) list_partition_emmc
(bootloader) load_emmc
(bootloader) check_emmc
(bootloader) check_emmc_mid
(bootloader) read_mmc
(bootloader) load_modem_emmc
(bootloader) get_wp_info_emmc
(bootloader) send_wp_info_emmc
(bootloader) get_ext_csd_emmc
(bootloader) get_sector_info_emmc
OKAY [ 0.225s]
finished. total time: 0.226s
Click to expand...
Click to collapse
you should go on the revolutionary IRC channel and see if there is anything they can get from your device... blocking out serial numbers obv that would allow them to get S-OFF for other tablets.
fastboot oem saveprt2sd hboot -n eng.bin
That will pretty much save the current ENG hboot to your sdcard (which you'd need inserted), so you can upload.
But, as with many factory/eng S-OFF devices, they are of little use in exploiting S-ON.
ieftm said:
fastboot oem saveprt2sd hboot -n eng.bin
That will pretty much save the current ENG hboot to your sdcard (which you'd need inserted), so you can upload.
But, as with many factory/eng S-OFF devices, they are of little use in exploiting S-ON.
Click to expand...
Click to collapse
thanks eft for getting back to me and taking a look at this.
ieftm said:
fastboot oem saveprt2sd hboot -n eng.bin
That will pretty much save the current ENG hboot to your sdcard (which you'd need inserted), so you can upload.
But, as with many factory/eng S-OFF devices, they are of little use in exploiting S-ON.
Click to expand...
Click to collapse
Awesome, my last day with the device. I'll try that now.
Already got the ENG HBOOT, if any devs or anyone else that wants to have a peek at it, let me know and I'll upload it for them.
Also talked to IEF about backing up the rom, and it's doable. But he doesn't find a necessity or benefit for doing so.
cookiesowns said:
Awesome, my last day with the device. I'll try that now.
Already got the ENG HBOOT, if any devs or anyone else that wants to have a peek at it, let me know and I'll upload it for them.
Also talked to IEF about backing up the rom, and it's doable. But he doesn't find a necessity or benefit for doing so.
Click to expand...
Click to collapse
I would like to take a look at the eng hboot. Would you be willing to post? Or via a pm? Thanks!
Steve
sk806 said:
I would like to take a look at the eng hboot. Would you be willing to post? Or via a pm? Thanks!
Steve
Click to expand...
Click to collapse
I would like to see it as well if possible
Related
[Q] USB unbrick problem
Hi All, I tried to usb-unbrick my rooted phone some solutions, but the phone still usb-bricked. The sd card access is working, but the usb works only fastboot. ADB is not working. I tried this solution http://forum.xda-developers.com/showthread.php?t=751265 but nothing has changed. I flashed the mtd0.img again and again. I have not got error messages and the fatboot oem boot result seems ok. After this I unrooted the phone to the original stock rom like this post: http://forum.xda-developers.com/showpost.php?p=9889284&postcount=60 , but I still haven't got usb. I rooted it again with hard work (no adb and usb, only temproot with visionary and terminal command what I used), and I tried some radio image, some rom, but nothing has changed. I still havn't got usb connection. The fastboot oem boot output: (bootloader) setup_tag addr=0x60000100 cmdline add=0x9D07B198 (bootloader) TAG:Ramdisk OK (bootloader) TAG:smi ok, size = 0 (bootloader) TAG:hwid 0x0 (bootloader) TAG:skuid 0x22F00 (bootloader) TAG:hero panel = 0x0 (bootloader) TAG:engineerid = 0x0 (bootloader) MCP dual-die (bootloader) MCP dual-die (bootloader) TAG:mono-die = 0x0 (bootloader) Device CID is not super CID (bootloader) CID is HTC__032 (bootloader) setting->cid::HTC__032 (bootloader) serial number: HT03ZNX01346 (bootloader) commandline from head: no_console_suspend=1 console=null (bootloader) command line length =446 (bootloader) active commandline: board_legend.disable_uart3=0 board_legen (bootloader) d.usb_h2w_sw=0 board_legend.disable_sdcard=0 diag.enabled=0 (bootloader) board_legend.debug_uart=0 smisize=0 userdata_sel=0 androidbo (bootloader) ot.emmc=false androidboot.baseband=7.05.35.26L androidboot. (bootloader) cid=HTC__032 androidboot.carrier=HTC-EastEurope androidboot. (bootloader) mid=PB7610000 androidboot.keycaps=qwerty androidboot.mode=no (bootloader) rmal androidboot.serialno=HT03ZNX01346 androidboot.bootloade (bootloader) r=1.01.0000 no_console_suspend=1 console=null (bootloader) aARM_Partion[0].name=misc (bootloader) aARM_Partion[1].name=recovery (bootloader) aARM_Partion[2].name=boot (bootloader) aARM_Partion[3].name=system (bootloader) aARM_Partion[4].name=cache (bootloader) aARM_Partion[5].name=userdata (bootloader) partition number=6 (bootloader) Valid partition num=6 FAILED (status read failed (Too many links)) finished. total time: 0.953s The most important options seems ok: board_legend.disable_uart3=0 board_legend.usb_h2w_sw=0 board_legend.disable_sdcard=0 diag.enabled=0 So I don't know what I have to do. What is the problem? I would be very happy, if somebody could help me. Thanks!
[DEV INFO] Rezound HBOOT Fastboot Oem Commands
Warning!!!!!!!!! Some of these commands can and will brick your phone. Don't run them if you don't know what you are doing. Thought these might be useful to someone: HBOOT 2.25: (bootloader) refurbish (bootloader) get_identifier_token (bootloader) checkSbl1 (bootloader) checkHWSecurity (bootloader) checkKeycardID (bootloader) enter (bootloader) keytest (bootloader) heap (bootloader) boot (bootloader) reset (bootloader) powerdown (bootloader) rebootRUU (bootloader) heap_test (bootloader) erase_phone_storage (bootloader) erase_userdata (bootloader) ats (bootloader) rtask (bootloader) task (bootloader) enableqxdm (bootloader) gencheckpt (bootloader) readmeid (bootloader) readpid (bootloader) writepid (bootloader) readcid (bootloader) writecid (bootloader) readimei (bootloader) writeimei (bootloader) readsecureflag (bootloader) writesecureflag (bootloader) lock (bootloader) list_partition_emmc (bootloader) load_emmc (bootloader) check_emmc (bootloader) check_emmc_mid (bootloader) read_mmc (bootloader) load_modem_emmc (bootloader) get_wp_info_emmc (bootloader) send_wp_info_emmc (bootloader) get_ext_csd_emmc (bootloader) get_sector_info_emmc -------------------------------------------------------- ENG HBOOT (bootloader) command list (bootloader) mb (bootloader) mh (bootloader) mw (bootloader) ew (bootloader) eh (bootloader) eb (bootloader) mmu (bootloader) ram_test (bootloader) jump (bootloader) test (bootloader) sdtest (bootloader) eraseconfig (bootloader) writeconfig (bootloader) readconfig (bootloader) writesku (bootloader) readsku (bootloader) rflash (bootloader) tflash (bootloader) block_test (bootloader) partition_test (bootloader) rbchk (bootloader) erasesd (bootloader) btrouter (bootloader) nfcrouter (bootloader) nfcreader (bootloader) nfccard (bootloader) nfcversion (bootloader) nfcdl (bootloader) nfctransaction (bootloader) tick (bootloader) heaptable (bootloader) sysinfo (bootloader) emapi (bootloader) emapiTest (bootloader) emapiCountryID (bootloader) emapiWlanMac (bootloader) emapiSetDefCal (bootloader) emapiReadCal (bootloader) emapiReadbtaddr (bootloader) lr (bootloader) imgcrc (bootloader) resetautoimage (bootloader) resetpreferdiag (bootloader) resetRUUflag (bootloader) writeserialno (bootloader) readserialno (bootloader) battcheck (bootloader) enter (bootloader) gotofastboot (bootloader) gotohboot (bootloader) writemid (bootloader) usbtestmode (bootloader) eraseWifiFlash (bootloader) erase (bootloader) readmbserialno (bootloader) listpartition (bootloader) erasebcid (bootloader) writebcid (bootloader) readbcid (bootloader) fmrouter (bootloader) fmtx (bootloader) resetuP (bootloader) bdaddress (bootloader) readbdaddr (bootloader) resetgift (bootloader) wMfgTp (bootloader) rMfgTp (bootloader) emptypagecheck (bootloader) saveprt2sd (bootloader) savemem2sd (bootloader) savefb2sd (bootloader) emapiInit (bootloader) emapiChannel (bootloader) emapiBand (bootloader) emapiRate (bootloader) emapiRateset (bootloader) emapiCountry (bootloader) emapiTXpwr1 (bootloader) emapiPkteng_start (bootloader) emapiPkteng_stop (bootloader) emapiOut (bootloader) emapiFqacurcy (bootloader) emapiCrsuprs (bootloader) emapiUp (bootloader) emapiDown (bootloader) emapiMpc (bootloader) emapiCounters (bootloader) emapiVersion (bootloader) emapiEtheraddr (bootloader) emapinRate (bootloader) emapiSetIrqPin (bootloader) usblog (bootloader) bkflash2emmc (bootloader) fl (bootloader) loaddiag (bootloader) lnb (bootloader) init_a1026_fw (bootloader) checkKeyCard (bootloader) loopback (bootloader) spitest (bootloader) i2ctest (bootloader) pmic8058_led_test (bootloader) ats (bootloader) gpiow (bootloader) gpior (bootloader) clock (bootloader) i2cr (bootloader) i2cw (bootloader) i2ctest (bootloader) ulpi (bootloader) changeCid (bootloader) powertest (bootloader) read_l2_acc_fuse (bootloader) ltetest (bootloader) sdio_loopback (bootloader) sdio_setsize (bootloader) sdio_readblk (bootloader) sdio_writeblk (bootloader) sdio_readblk (bootloader) sdio_dumpreg (bootloader) get_mdm9k_serial (bootloader) clear_mdm9k_serial (bootloader) update_prkey (bootloader) emmc_boot (bootloader) 8x60i2cr (bootloader) 8x60i2crNoAddr (bootloader) 8x60i2cwNoAddr (bootloader) 8x60i2cw (bootloader) poweron (bootloader) poweroff (bootloader) setvol (bootloader) spi (bootloader) fat (bootloader) pmgpiow (bootloader) pmgpior (bootloader) 8058vregon (bootloader) 8058vregoff (bootloader) 8058vregw (bootloader) 8058vregr (bootloader) 8901vregon (bootloader) 8901vregoff (bootloader) 8901vregw (bootloader) 8901vregr (bootloader) mipi_test (bootloader) chargeron (bootloader) chargeroff (bootloader) adc (bootloader) readsimlocktype (bootloader) enablesimlock (bootloader) addsimlockcode (bootloader) clearsimlockcode (bootloader) listsimlockcode (bootloader) clearunlockrecord (bootloader) lite_heap_test (bootloader) vibrate_test (bootloader) getrtc (bootloader) setrtc (bootloader) getrtcalarm (bootloader) setrtcalarm (bootloader) pgfs (bootloader) bumpclk (bootloader) acpuclk_get (bootloader) acpuclk_set (bootloader) rpmclk_set (bootloader) rpmclk_get (bootloader) oschalt (bootloader) tz_req (bootloader) blow_efuse (bootloader) blow_qfuse_cfg (bootloader) dump_tzlog (bootloader) fdisk_emmc (bootloader) set_partition_emmc (bootloader) erase_emmc (bootloader) test_emmc (bootloader) sector_erase_emmc (bootloader) fat_format_emmc (bootloader) init_emmc (bootloader) reinit_emmc (bootloader) write_mmc (bootloader) set_wp_emmc (bootloader) write_prot_test (bootloader) clear_wp_emmc (bootloader) set_enh_area_emmc (bootloader) refurbish (bootloader) get_identifier_token (bootloader) checkSbl1 (bootloader) checkHWSecurity (bootloader) checkKeycardID (bootloader) enter (bootloader) keytest (bootloader) heap (bootloader) boot (bootloader) reset (bootloader) powerdown (bootloader) rebootRUU (bootloader) heap_test (bootloader) rtask (bootloader) task (bootloader) enableqxdm (bootloader) gencheckpt (bootloader) readmeid (bootloader) readpid (bootloader) writepid (bootloader) readcid (bootloader) writecid (bootloader) readimei (bootloader) writeimei (bootloader) readsecureflag (bootloader) writesecureflag (bootloader) lock (bootloader) list_partition_emmc (bootloader) load_emmc (bootloader) check_emmc (bootloader) check_emmc_mid (bootloader) read_mmc (bootloader) load_modem_emmc (bootloader) get_wp_info_emmc (bootloader) send_wp_info_emmc (bootloader) get_ext_csd_emmc (bootloader) get_sector_info_emmc
You sir, are awesome. Thx!
a.mcdear said: You sir, are awesome. Thx! Click to expand... Click to collapse Lol you are welcome.
Haha for a good time run: fastboot oem jump scared the crap out of me
jefffeely said: Haha for a good time run: fastboot oem jump scared the crap out of me Click to expand... Click to collapse What the does it do? Sent from my ADR6425LVW using XDA
RDxxASSASSINxx said: What the does it do? Sent from my ADR6425LVW using XDA Click to expand... Click to collapse Awww that will ruin the surprise! Just kidding. It rebooted the phone and dumped hboot debugging info to the screen. Code: (bootloader) setup_tag addr=0x48800100 cmdline add=0x801F031C (bootloader) TAG:Ramdisk OK (bootloader) TAG:skuid 0x2B501 (bootloader) TAG:hero panel = 0x4940039 (bootloader) TAG:engineerid = 0x2 (bootloader) TAG: PS ID = 0x0 (bootloader) Device CID is not super CID (bootloader) CID is VZW__001 (bootloader) setting->cid::VZW__001 (bootloader) serial number: HT19WS521344258 (bootloader) commandline from head: console=ttyHSL3 androidboot.hardware= (bootloader) vigor no_console_suspend=1 (bootloader) command line length =645 (bootloader) active commandline: poweron_status=1 board_vigor.disable_uar (bootloader) t3=0 diag.enabled=0 board_vigor.debug_uart=0 userdata_sel=0 (bootloader) androidboot.emmc=true androidboot.pagesize=2048 skuid=0 ddt= (bootloader) 20 androidboot.lb=0 td.td=0 td.sf=0 td.ofs=328 td.prd=1 td.d (bootloader) ly=0 td.tmo=300 androidboot.baseband=0.95.00.1118r/0.95.00.1 (bootloader) 223r androidboot.cid=VZW__001 androidboot.devicerev=2 androi (bootloader) dboot.batt_poweron=good_battery androidboot.carrier=COMMON a (bootloader) ndroidboot.mid=PH9810000 androidboot.keycaps=qwerty androidb (bootloader) oot.dq=PASS androidboot.mode=normal androidboot.serialno=HT1 (bootloader) 9WS213wefwef58 androidboot.bootloader=2.11.2005 zygote_oneshot=on (bootloader) console=ttyHSL3 androidboot.hardware=vigor no_console_suspe (bootloader) nd=1 (bootloader) aARM_Partion[0].name=misc (bootloader) aARM_Partion[1].name=recovery (bootloader) aARM_Partion[2].name=boot (bootloader) aARM_Partion[3].name=system (bootloader) aARM_Partion[4].name=local (bootloader) aARM_Partion[5].name=cache (bootloader) aARM_Partion[6].name=userdata (bootloader) aARM_Partion[7].name=devlog (bootloader) aARM_Partion[8].name=pdata (bootloader) aARM_Partion[9].name=extra (bootloader) aARM_Partion[A].name=radio (bootloader) aARM_Partion[B].name=adsp (bootloader) aARM_Partion[C].name=radio_config (bootloader) aARM_Partion[D].name=modem_st1 (bootloader) aARM_Partion[E].name=modem_st2 (bootloader) aARM_Partion[F].name=mdm9k (bootloader) aARM_Partion[10].name=mdm9k_config (bootloader) aARM_Partion[11].name=mdm_efs1 (bootloader) aARM_Partion[12].name=mdm_efs2 (bootloader) partition number=19 (bootloader) Valid partition num=19 (bootloader) TZ_HTC_SVC_SET_DDR_MPU ret = 0 (bootloader) smem 50004000 (phy 50004000): TZ_HTC_SVC_UPDATE_SMEM ret = 0 (bootloader) [SECURITY] TZ_HTC_SVC_MEMCPY ret = 0 (bootloader) TZ_HTC_SVC_ENC ret = 0 (bootloader) [SECURITY] radio_gen_mdm_smem_signature: completed (bootloader) TZ_HTC_SVC_LOG_OPERATOR ret = 0 (bootloader) TZ_HTC_SVC_DISABLE ret = 73490432 (0x4616000) (bootloader) Vigor_gpio_init_For9K_OnAndBack (bootloader) jump_to_kernel: machine_id(3365), tags_addr(0x48800100), ker (bootloader) nel_addr(0x48808000) (bootloader) -------------------hboot boot time:300087 msec The reason it startled me is because I wasn't expecting my phone to do anything, and of course it vibrated when it rebooted.
[Q] HTC One Died from System Update
T-Mobile OTA update crashed my phone. Stops at the White HTC screen, Recovery, Factory Reset etc. did not work. Screen goes black with the red triangle and exclamation point ! Box stock phone no mods etc. Cannot get adb to talk to the phone. The only thing that seems to work is fastboot. I have tried all the recommended drivers for Windows 7 64bit. Any help would be appreciated, I would like to be able to get my pictures and contacts off the phone before sending it back to T-Mobile. Or be able to save it if possible. fastboot getvar all (bootloader) version: 0.5 (bootloader) version-bootloader: 1.55.0000 (bootloader) version-baseband: 4A.21.3263.03 (bootloader) version-cpld: None (bootloader) version-microp: None (bootloader) version-main: 3.24.531.3 (bootloader) version-misc: PVT SHIP S-ON (bootloader) serialno: (bootloader) imei: (bootloader) meid: 00000000000000 (bootloader) product: m7_ul (bootloader) platform: HBOOT-8064 (bootloader) modelid: PN0713000 (bootloader) cidnum: T-MOB010 (bootloader) battery-status: good (bootloader) battery-voltage: 4284mV (bootloader) partition-layout: Generic (bootloader) security: on (bootloader) build-mode: SHIP (bootloader) boot-mode: FASTBOOT (bootloader) commitno-bootloader: dirty-412e361e (bootloader) hbootpreupdate: 11 (bootloader) gencheckpt: 0 all: Done!
Dead0ne said: T-Mobile OTA update crashed my phone. Stops at the White HTC screen, Recovery, Factory Reset etc. did not work. Screen goes black with the red triangle and exclamation point ! Box stock phone no mods etc. Cannot get adb to talk to the phone. The only thing that seems to work is fastboot. I have tried all the recommended drivers for Windows 7 64bit. Any help would be appreciated, I would like to be able to get my pictures and contacts off the phone before sending it back to T-Mobile. Or be able to save it if possible. Click to expand... Click to collapse Don't give up on it yet, let's try some things first. The black screen with the red triangle is the stock recovery screen when there is an issue otherwise it would have a green triangle. It sounds like the OTA didn't like your setup. ADB works in OS/Android if USB Debugging is on in Developer's Options or in Recovery. Your bootloader needs to be locked/relocked to run RUU or firmware when S-ON Here are the RUU's and OTA to get up to date. What I would do is flash the firmware 4.19.531.10 first then run the RUU 5.14.531.11. What you really want is for the firmware packages to be consecutive when you are updating. RUU 3.24.531.3 Stock firmware 4.19.531.10 OTA_M7_UL_K44_SENSE55_MR_TMOUS_4.19.531.10-3.24.531.3_release_351678n41r1lfticqo8m4c.zip RUU 5.14.531.11 RUU 6.10.531.9 Here are some instructions on how to flash the firmware. Place the firmware in your adb/fastboot folder and rename it firmware.zip or just change the command below to actual firmware name. Boot phone into bootloader/FASTBOOT USB After that, type: Code: [B][I]fastboot oem rebootRUU [/I][/B] NOTE: You should see a silver HTC logo come up on your phone after executing this command. NOTE: if this command freezes, just disconnect the USB cable and hold the power and volume down buttons until the device reboots. Then, repeat the steps above again. Finally: Code: [B][I]fastboot flash zip firmware.zip[/I][/B] Repeat the same command: IMPORTANT Code: [B][I]fastboot flash zip firmware.zip[/I][/B] NOTE: The green bar on the phone may not go to 100% of the bar ... but If you see completed on your computer command window, wait for a few seconds and move on. Last Step: Code: [B][I]fastboot reboot[/I][/B] Click to expand... Click to collapse
Thanks majmoz for the reply. I installed the firmware from the link you provided. Still not able to get ADB commands working. Device not found is all I get. Being new at this I could be doing something wrong. Tried recovery again and still get the red triangle. Assume I need ADB commands working to perform the S-OFF locked relocked. I know that before the phone crashed USB debugging was on. When the HTC MTP Device driver tries to install in always fails. Don't know if that matters.
Dead0ne said:
Thanks majmoz for the reply. I installed the firmware from the link you provided. Still not able to get ADB commands working. Device not found is all I get. Being new at this I could be doing something wrong. Tried recovery again and still get the red triangle. Assume I need ADB commands working to perform the S-OFF locked relocked. I know that before the phone crashed USB debugging was on. When the HTC MTP Device driver tries to install in always fails. Don't know if that matters.
Click to expand...
Click to collapse
Boot into bootloader/FASTBOOT USB then run the fastboot getvar all again. Check to see if version-main is 4.19.531.10. If it is then you know that the firmware worked. Now I would just run the RUU 5.14.531.11. This will get you back to square one but it may wipe your personal data from the phone.
If you want I can think of one more thing. It is a long shot but it may save your photos and contacts. (As a FYI, I use Google to backup my contacts, apps that way I will not lose them should something happen. In fact, the USB connector on my phone shorted and I could not use it. I just logged into Google and all of my items were back on the temp phone. ) You just need a ROM to push to your phone, this one was made for TMO Users SkyDraon V20.0 TMO or an older version of ARHD 53 or 62. You just want to flash a ROM then boot into OS and remove your personal files. After the files are removed, you can run the RUU. Here is a procedure to accomplish getting the ROM on your phone.
Originally posted by @alrayHTC ONE M7_U/M7_UL - ADB PUSH & FLASH A ROM - DETAILED INSTRUCTIONS
Prerequisites:
You need ADB and FASTBOOT on your computer,
either by installing the Android SDK or Minimal ADB and FASTBOOT
You need to know how to start a fastboot/adb command prompt:
To open a command window prompt, in Windows go to Start Menu --> ''Run'' then type cmd. Change the directory to the ADB folder on your machine:
If using the default install location for the SDK:
Code:
cd C:\adt-bundle-windows-x86_64-<DATE>\sdk\platform-tools
If using the default install location of Minimal ADB and FASTBOOT:
Code:
cd C:\Program Files (x86)\Minimal ADB and Fastboot
Or hold left shift + right click a blank space inside the folder where adb and fastboot are located and select ''Open command window here'' from the contextual menu.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
You need TWRP recovery on your device.
We still recommend to use version 2.6.3.3 for all roms
except if another version is specified in the rom OP.
Use 2.7.1.1+ for roms that require "block:by-name" support (CM11)
Unlock bootloader if not already unlocked:
Thanks to Electroz for the video tutorial
Flash TWRP Recovery:
Make sure the recovery.img file is in the same folder where adb and fastboot are located
(C:\adt-bundle-windows-x86_64-<DATE>\sdk\platform-tools or C:\Program Files (x86)\Minimal ADB and Fastboot)
reboot phone in bootloader mode
Flash the recovery:
Code:
fastboot flash recovery name_of_recovery.img
fastboot erase cache
fastboot reboot-bootloader
You need your HTC drivers correctly installed on your PC:
If not, follow this guide (thanks to nkk71):
originally from @nkk71: [GUIDE] [02-MAR-2014] nkk71's SuperGUIDE to returning 100% back to stock
follow the below instructions to fix
Open "Device Manager" -> select the unknown "One" -> right-click -> "Update Driver Software ..." -> "Browse my computer" -> "Let me pick" -> "Android USB Devices" -> select "My HTC ..." -> install that
just in case, HTC Drivers can be found here: [Drivers] HTC Drivers for Windows - Several Versions (credits to @mdmower)
though you should already have them since you have been using your phone anyways
for those who like a visual guide:
okay so I did a fastboot boot command, and as you can see it didnt install correct driver
Open "Device Manager"
there's the culprit
right click and Update Driver Software
select Browse my computer for driver software
select Let me pick from a list of device drivers on my computer
select Android USB Devices
select My HTC ... (if you have more than one version, choose the latest)
warning, select Yes
successful installation
now it looks better
and can confirm:
Code:
C:\ADB3>[B]adb devices[/B]
List of devices attached
HTxxxxxxxxxx recovery
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Procedure:
Make sure the ROM you want to flash is in the same folder where ADB and FASTBOOT are.
(C:\adt-bundle-windows-x86_64-<DATE>\sdk\platform-tools or C:\Program Files (x86)\Minimal ADB and Fastboot)
Here is a list of the HTC M7 roms. Some other roms can be found here.
Connect your phone to computer using usb cable
(if not using the official HTC USB calble, make sure
you are using a USB data cable and not only a charging
cable. Data cables have 4 contacts: 5V, GND, DATA+, DATA-.
Charging cable only have 5V and GND contact and will not work)
Reboot phone in recovery mode (TWRP):
If phone is booted in OS:
Code:
adb reboot recovery
if not booted or bootlooping, hold power button + volume down until phone boot in bootloader mode
then select BOOTLOADER then RECOVERY using volume up/down to navigate and power button to select.
Make sure your phone is booted in TWRP main menu:
transfer the rom to your /sdcard folder:
Code:
adb push name_of_rom.zip /sdcard/
Wait for the zip file to transfer, this can take several minutes (5-15) and there is no progress bar, the command prompt will be unresponsive for that duration. When the command prompt is responsive again and display how much bytes transferred in X seconds, the transfer is completed:
In TWRP main menu, select ''INSTALL''
Browse the installation menu and select your rom zip file inside /sdcard folder:
Swipe to confirm you want to flash the rom
Reboot phone
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Thank you again for your time and information majmoz. I verified version-main is 4.19.531.10. Phone still does not respond to ADB commands except a couple of times when it recognized the phone was attached but phone was offline. HTC MTP driver still will not install. I gave up on trying to get anything off of the phone and tried the RUU 5.14.531.11 installation. It will not install as well, it complains the phone is not connected to the USB cable. I think it is toast. I think if I could figure out why the MTP driver fails I would be able to fix it.
Dead0ne said: Thank you again for your time and information majmoz. I verified version-main is 4.19.531.10. Phone still does not respond to ADB commands except a couple of times when it recognized the phone was attached but phone was offline. HTC MTP driver still will not install. I gave up on trying to get anything off of the phone and tried the RUU 5.14.531.11 installation. It will not install as well, it complains the phone is not connected to the USB cable. I think it is toast. I think if I could figure out why the MTP driver fails I would be able to fix it. Click to expand... Click to collapse I have an idea, have you tried various cables/ports with the same results? Does your phone still charge through the USB port? If yes, maybe either a different computer or using Linux on a USB will help. Here is how you can setup the Linux system on your computer without installing it on your computer: HOW TO USE LINUX FOR FASTBOOT & ADB VIA USB This guide originally posted by @Danny201281 http://forum.xda-developers.com/showpost.php?p=54272479&postcount=219Linux is your friend; if your drivers are not working the chances of getting them working again without the phone booting are slim. But Linux doesn't need drivers to talk to your device. Go here: http://www.pendrivelinux.com/ and download Universal USB Installer – Easy as 1 2 3 Then go here: http://releases.ubuntu.com/12.04/ and download Ubuntu from the first link at the top that says PC (Intel x86) desktop CD Then use these files to create a bootable Linux USB drive with at least a 2 GB persistent file for storing files. You'll also probably need to change your boot settings in the computers bios to boot from USB. MOVING YOUR FILES TO UBUNTU Once booted you should be at a screen with options to "Try Ubuntu” or "Install Ubuntu". We don’t need to Install anything so just choose "Try Ubuntu" and the computer will boot to the Ubuntu Desktop (If you get a popup saying "system has encountered an error" or something similar just cancel and ignore it, it should have no effect on what we need to do as it is due to missing Linux OS updates we don’t need). On the left of the screen you'll see the Dock. Open the orange folder icon near the top this is the Home folder. It’s where we need to put any files we need to work with such as a rom.zip you want to push to the device or recovery.img files for flashing. To get your files here is a simple drag and drop process. In the top left of the Home folder you'll see the drive structure of you pc under devices. Choose your PCs hard drive and Right-Click then" Open in a new window". Locate your .zip or .img files and drag them into the home folder. Now wait for the copy process to complete and rename them for easier typing later, e.g., rom.zip, firmware.zip or recovery.img etc. USING ADB AND FASTBOOT First you need to install adb fastboot; this is easy just 3 commands in the terminal. Thanks to Webupd8 team. Code: sudo add-apt-repository ppa:nilarimogard/webupd8 Code: sudo apt-get update Code: sudo apt-get install android-tools-adb android-tools-fastboot Make sure your connected to the internet and press Ctrl+Alt+T to open the terminal then type or copy and paste the above commands one at a time waiting for each to complete their output. It may seem to have stopped at times but be patient when the prompt returns to normal enter the next command and when there all done you’re ready to use adb and fastboot. Once you've moved all the files you need to the home folder that’s it you’re ready to go. Close everything down on the desktop (optional) and press Ctrl+Alt+T this will open the terminal now connect your phone with the USB cable. All fastboot commands need to have the "sudo" prefix added at the start, e.g. fastboot flash recovery recovery.img becomes sudo fastboot flash recovery recovery.img fastboot devices becomes sudo fastboot devices However, adb should work basically the same as on windows. If you do have problems with normal adb commands adding “sudo” can help here as well. Click to expand... Click to collapse If Linux works, you can move your personal files off of your phone by just copying the files to your computer. Your next question how can I run the RUU.exe on Linux. Well, you can not but you can extract the two Rom zips from the RUU. Then you can flash them in Linux using the fastboot oem rebootRUU mode. How to extract the ROM.zips from RUU 5.14.531.1.EXEOnce you've started the RUU 5.14.531.1.EXE, it will have created a temporary directory in %TEMP%, and within that folder you will find a 1GB+ file called ROM.ZIP <- this is the full ruu.zip which you can flash using Linux. After starting the RUU 5.14.531.1.EXE, when it's on the first screen and before you select Next, in Windows Explorer type %TEMP% in the search box that will jump you to the folder, sort by date modified, and find the newest folder within that, it's going to have a weird long alpha numeric name, and within that you'll find plenty of files, but one very large file called ROM_02.ZIP and ROM_01.zip, those are the ones you want. Click to expand... Click to collapse You will flash these like you flashed the firmware. Flash ROM_01 first, twice if it failed the first time. Then ROM_02 without rebooting. If It fails the first time, then flash it again. Something like this: Code: fastboot oem rebootRUU fastboot flash zip RUU_ROM_01.zip fastboot flash zip RUU_ROM_01.zip fastboot flash zip RUU_ROM_02.zip fastboot reboot-bootloader
Yes, I have tried 2 cables and 3 computers all Windows 7 one 32bit. All with the same problems. I will try the Linux option. Sounds like that will be my best bet to try and save the phone. I'll let you know if it works. Found out that T-Mobile will not warranty it (expired in May) even though their update crashed it. Looking at getting a Galaxy Note 4, I need a phone right away as I use it for work as well. Thanks again majmoz would have been lost without your assistance.
I have the phone up and running finally. I ended up with the latest TMO RUU on my phone. I am still unable to get ADB to see the phone and would like to know what I am doing wrong., so if you could tell me what mode or state the phone needs to be in for ADB to work I would appreciate it. I don't see the USB debugging option anymore with the new ROM. I don't know if it matters but when I boot into recovery I still get the red triangle with the exclamation point. Thanks again! (bootloader) version: 0.5 (bootloader) version-bootloader: 1.57.0000 (bootloader) version-baseband: 4T.28.3218.04 (bootloader) version-cpld: None (bootloader) version-microp: None (bootloader) version-main: 6.10.531.9 (bootloader) version-misc: PVT SHIP S-ON (bootloader) serialno: (bootloader) imei: (bootloader) meid: 00000000000000 (bootloader) product: m7_ul (bootloader) platform: HBOOT-8064 (bootloader) modelid: PN0713000 (bootloader) cidnum: T-MOB010 (bootloader) battery-status: good (bootloader) battery-voltage: 4302mV (bootloader) partition-layout: Generic (bootloader) security: on (bootloader) build-mode: SHIP (bootloader) boot-mode: FASTBOOT (bootloader) commitno-bootloader: dirty-6d8a0b9b (bootloader) hbootpreupdate: 11 (bootloader) gencheckpt: 0 all: Done!
Dead0ne said: I have the phone up and running finally. I ended up with the latest TMO RUU on my phone. I am still unable to get ADB to see the phone and would like to know what I am doing wrong., so if you could tell me what mode or state the phone needs to be in for ADB to work I would appreciate it. I don't see the USB debugging option anymore with the new ROM. I don't know if it matters but when I boot into recovery I still get the red triangle with the exclamation point. Thanks again! Click to expand... Click to collapse You have to enable USB Debugging in Developer's Option: http://htc-one.wonderhowto.com/how-to/enable-usb-debugging-your-htc-one-0151177/ ADB will work if the phone is in the OS/Android and USB Debugging is enabled. ADB also works when the phone is in Recovery Mode with a custom recovery. You do not have a custom recovery installed if you see the red triangle, that is stock recovery. You will have to flash the custom recovery in bootloader/FASTBOOT USB: Code: fastboot flash recovery name_of_recovery.img fastboot erase cache fastboot reboot-bootloader
Same issue but version-main is weird... Hi, I have the same issue, and tried different RUU's and firmware. Even ROMs, but nothing seems to work. The funny thing is that the version-main, from the fastboot getvar all command, has rare signs... fastboot getvar all (bootloader) version: 0.5 (bootloader) version-bootloader: 1.57.0000 (bootloader) version-baseband: 4T.28.3218.04 (bootloader) version-cpld: None (bootloader) version-microp: None (bootloader) version-main: 6«10.531.= (bootloader) version-misc: PVT SHIP S-ON (bootloader) serialno: (bootloader) imei: (bootloader) meid: 00000000000000 (bootloader) product: m7_ul (bootloader) platform: HBOOT-8064 (bootloader) modelid: PN0713000 (bootloader) cidnum: T-MOB010 (bootloader) battery-status: good (bootloader) battery-voltage: 4045mV (bootloader) partition-layout: Generic (bootloader) security: on (bootloader) build-mode: SHIP (bootloader) boot-mode: FASTBOOT (bootloader) commitno-bootloader: dirty-6d8a0b9b (bootloader) hbootpreupdate: 11 (bootloader) gencheckpt: 0 So, mi question is.. this steps will work for my phone too, or I have to use another firmware and RUU... or haw can i recover my HTC One, and why has this funny characters in the version-main value.... When turn on my phone, I get the HTC One logo in green letters, and white background.. and thats all... When I tried to turn on in fastboot mode, it turns on.. and changes has fastboot usb, but always I tried to install something, return the "verification failed" message. Please Help! Ps. @Dead0ne can you please share the TMO RUU you use to recover your phone?
Angelus96 said: Hi, I have the same issue, and tried different RUU's and firmware. Even ROMs, but nothing seems to work. The funny thing is that the version-main, from the fastboot getvar all command, has rare signs... fastboot getvar all (bootloader) version: 0.5 (bootloader) version-bootloader: 1.57.0000 (bootloader) version-baseband: 4T.28.3218.04 (bootloader) version-cpld: None (bootloader) version-microp: None (bootloader) version-main: 6«10.531.= (bootloader) version-misc: PVT SHIP S-ON (bootloader) serialno: (bootloader) imei: (bootloader) meid: 00000000000000 (bootloader) product: m7_ul (bootloader) platform: HBOOT-8064 (bootloader) modelid: PN0713000 (bootloader) cidnum: T-MOB010 (bootloader) battery-status: good (bootloader) battery-voltage: 4045mV (bootloader) partition-layout: Generic (bootloader) security: on (bootloader) build-mode: SHIP (bootloader) boot-mode: FASTBOOT (bootloader) commitno-bootloader: dirty-6d8a0b9b (bootloader) hbootpreupdate: 11 (bootloader) gencheckpt: 0 So, mi question is.. this steps will work for my phone too, or I have to use another firmware and RUU... or haw can i recover my HTC One, and why has this funny characters in the version-main value.... When turn on my phone, I get the HTC One logo in green letters, and white background.. and thats all... When I tried to turn on in fastboot mode, it turns on.. and changes has fastboot usb, but always I tried to install something, return the "verification failed" message. Please Help! Click to expand... Click to collapse You can try this RUU 6.10.531.09 it looks to match you have posted. You will need to lock your bootloader if it is not already locked. You can lock it with the following command: Code: fastboot oem lock Sorry I don't know what could have caused the strange characters.
Thanks @majnoz, I`ll try with that one. Just one doubt... Should I flash the firmware or I just run the ruu...? Thanks!
Angelus96 said: Thanks @majnoz, I`ll try with that one. Just one doubt... Should I flash the firmware or I just run the ruu...? Thanks! Click to expand... Click to collapse If you have the firmware you can try to flash it and see if it solves your issue, if not then try the RUU. And you can find the updated RUU 6.10.531.10 here.
majmoz said: If you have the firmware you can try to flash it and see if it solves your issue, if not then try the RUU. . Click to expand... Click to collapse Hey @majmoz, I'be been busy... so I left this issue aside for a while.... I recently tried with this RUU in my PC: RUU_M7_UL_L50_SENSE60_MR_TMOUS_7.18.531.2_Radio_4T.35.3218.16_10.33Q.1718.01L_release_421697_signed_2.exe It suppose to be the latest update from HTC to One T-mobile devices. So i tried, and it run smoothly. It finish ok, and it says that the phone was updated. But again, the phone stays under the HTC Logo. I enter to bootloader and select recovery mode, it run, but shows this message: E:missing bitmap oem_unlock_bg E:missing bitmap oem_unlock_bg_yes E:missing bitmap oem_unlock_bg_no (code -l) E:missing bitmap icon_ruu (code -l) E: failed to mount /data (invalid argument).. try emmc mount handle_cota_install: Can't mount /data This is what the phone shows in bootloader: *** RELOCKED *** M7_UL PVT SHIP S-ON RH HBOOT-1.61.0000 RADIO-4T.35.3218.16 OpenDSP-v35.120.274.0718 OS-7.18.531.2 eMMC-boot 2048MB And this is the fastboot getvar all: (bootloader) version: 0.5 (bootloader) version-bootloader: 1.61.0000 (bootloader) version-baseband: 4T.35.3218.16 (bootloader) version-cpld: None (bootloader) version-microp: None (bootloader) version-main: 7.18.531.2 (bootloader) version-misc: PVT SHIP S-ON (bootloader) serialno: XXXXXXXXXXX #Im not showing this (bootloader) imei: xxxxxxxxxxxxxxx #Im not showing this (bootloader) meid: 00000000000000 (bootloader) product: m7_ul (bootloader) platform: HBOOT-8064 (bootloader) modelid: PN0713000 (bootloader) cidnum: T-MOB010 (bootloader) battery-status: good (bootloader) battery-voltage: 4076mV (bootloader) partition-layout: Generic (bootloader) security: on (bootloader) build-mode: SHIP (bootloader) boot-mode: FASTBOOT (bootloader) commitno-bootloader: dirty-331585dd (bootloader) hbootpreupdate: 11 (bootloader) gencheckpt: 0 all: Done! Can you help? What should I do next? I've seen that @hasoon2000, @vomer, @squabbi, @clsA and @nkk71, have a lot of experience with this phone, so if you don't mind I extend my request to them, cause I'm kind if desperate with this. I'm believing that is probably a lost cause.. but i don't want to give up. I'm kind stuck and I'm newbie.. so guys, Any help is very much appreciated, and I'm sorry if there is a problem with making a reference to you. Thanks in advance. Regards!
Angelus96 said: Hey @majmoz, I'be been busy... so I left this issue aside for a while.... I recently tried with this RUU in my PC: RUU_M7_UL_L50_SENSE60_MR_TMOUS_7.18.531.2_Radio_4T.35.3218.16_10.33Q.1718.01L_release_421697_signed_2.exe It suppose to be the latest update from HTC to One T-mobile devices. So i tried, and it run smoothly. It finish ok, and it says that the phone was updated. But again, the phone stays under the HTC Logo. I enter to bootloader and select recovery mode, it run, but shows this message: E:missing bitmap oem_unlock_bg E:missing bitmap oem_unlock_bg_yes E:missing bitmap oem_unlock_bg_no (code -l) E:missing bitmap icon_ruu (code -l) E: failed to mount /data (invalid argument).. try emmc mount handle_cota_install: Can't mount /data This is what the phone shows in bootloader: *** RELOCKED *** M7_UL PVT SHIP S-ON RH HBOOT-1.61.0000 RADIO-4T.35.3218.16 OpenDSP-v35.120.274.0718 OS-7.18.531.2 eMMC-boot 2048MB And this is the fastboot getvar all: (bootloader) version: 0.5 (bootloader) version-bootloader: 1.61.0000 (bootloader) version-baseband: 4T.35.3218.16 (bootloader) version-cpld: None (bootloader) version-microp: None (bootloader) version-main: 7.18.531.2 (bootloader) version-misc: PVT SHIP S-ON (bootloader) serialno: XXXXXXXXXXX #Im not showing this (bootloader) imei: xxxxxxxxxxxxxxx #Im not showing this (bootloader) meid: 00000000000000 (bootloader) product: m7_ul (bootloader) platform: HBOOT-8064 (bootloader) modelid: PN0713000 (bootloader) cidnum: T-MOB010 (bootloader) battery-status: good (bootloader) battery-voltage: 4076mV (bootloader) partition-layout: Generic (bootloader) security: on (bootloader) build-mode: SHIP (bootloader) boot-mode: FASTBOOT (bootloader) commitno-bootloader: dirty-331585dd (bootloader) hbootpreupdate: 11 (bootloader) gencheckpt: 0 all: Done! Can you help? What should I do next? I've seen that @hasoon2000, @vomer, @squabbi, @clsA and @nkk71, have a lot of experience with this phone, so if you don't mind I extend my request to them, cause I'm kind if desperate with this. I'm believing that is probably a lost cause.. but i don't want to give up. I'm kind stuck and I'm newbie.. so guys, Any help is very much appreciated, and I'm sorry if there is a problem with making a reference to you. Thanks in advance. Regards ! Click to expand... Click to collapse doesnt sound very nice try running RUU again (though i would prefer a "htc_fastboot oem rebootRUU" flash, but that involves a few things, so maybe a waste for now) anyway, run RUU, make sure it succeeds (you can also pull the ruu log from "C:\ruu_log" folder), then boot up, if it hangs, force reboot to bootloader, and: Code: fastboot oem last_dmesg and post that log (increase your command prompt buffer size if necessary) EDIT: question: is/was/were you, encrypting your device?? .
nkk71 said: doesnt sound very nice try running RUU again (though i would prefer a "htc_fastboot oem rebootRUU" flash, but that involves a few things, so maybe a waste for now) anyway, run RUU, make sure it succeeds (you can also pull the ruu log from "C:\ruu_log" folder), then boot up, if it hangs, force reboot to bootloader, and: Code: fastboot oem last_dmesg and post that log (increase your command prompt buffer size if necessary) EDIT: question: is/was/were you, encrypting your device?? . Click to expand... Click to collapse Thanks @nkk71, I did has you suggest. Install de RUU again, it was sucessfull, agains shows the congrats message. A curious thing is that no log file was created in c:/ruu_log... Eventough there is another log from earlier months or dates. . The phone still hangs in the HTC Green logo restart to bootloader, run the command you said: This is the exit: (bootloader) [95692] Command response received: 00000900 (bootloader) [95897] check pg1fs (bootloader) [100499] check pg2fs (bootloader) [180270] chipset_setting_init (bootloader) [184381] chipset_setting_init: read pid 203 (bootloader) [191980] SECURE_SMEM_STRUCT 85106000 (bootloader) [195464] read_simlock(1450): E05A355E, 245F1667 (bootloader) [196445] radio_init_secure_smem(928): C9F35678, 1 (bootloader) [202686] read_simlock_password(398): 60, 2, B4, 1D (bootloader) [202727] unlock_rec[0] = 0x85109000 (bootloader) [205492] unlock_rec[1] = 0x8510A000 (bootloader) [208249] simlock_passwd 0x85108000 (bootloader) [210418] secure_update_simlock ret = 0 (bootloader) [210804] final simlock 0 (bootloader) [211708] secure_set_simlock ret = 0 (bootloader) [220382] msm_rpm_init: RPM firmware 3.0.16850530 (bootloader) [220422] MPM_SLEEP_TICK: llums (bootloader) [220445] [SYSINFO] DDR: Hynix (bootloader) [220472] [SYSINFO] PVS: Krait:3 Q6:Fast VDDCX:Slow (bootloader) [220494] [SYSINFO] Vdd_dig: 0.5v (bootloader) [220516] hw_ver_id is 207150E1 (bootloader) [220538] speed_bin is 1 (bootloader) [220565] 0x207150E1 CPU-1.7G PMIC-v3.0 (bootloader) [220584] [SYSINFO] 0x207150E1 CPU-1.7G PMIC-v3.0 (bootloader) [220603] [SYSINFO] PMIC version (bootloader) [220628] PMIC revision 1: F4 (bootloader) [220651] PMIC revision 2: 6 (bootloader) [220671] pm8921_check_revision: *revision = 6F4 (bootloader) [220689] [SYSINFO] End PMIC version[220712] (bootloader) eMMC Manufacturer ID: 90 (bootloader) [220732] [SYSINFO] eMMC: Hynix 61079551 sectors 29823 MB (bootloader) [220753] [SYSINFO] eMMC-CID: 90014A48 12345678 40103BD 1E040 (bootloader) 68 (bootloader) [221874] [FAT_ERROR] fat_open_file: can not find RADIOVER.CF (bootloader) G (bootloader) [221907] No RADIOVER.CFG in radio image for WSD version! (bootloader) [222648] [FAT_ERROR] No M$-DOS partition found (bootloader) [222668] [FAT_ERROR] fat_open_file: load bpb fail(-22) (bootloader) [222700] No OPENDSPVER.CFG in adsp image for SSD version! (bootloader) [223279] [SYSINFO] SBL1: 1.010.30.55 (bootloader) [223682] [SYSINFO] SBL2: 1.010.30.52 (bootloader) [224163] [SYSINFO] SBL3: 1.010.30.50 (bootloader) [224567] [SYSINFO] TZ: 1.430.24.15 (bootloader) [224586] [SYSINFO] RPM: 3.0.98.30 (bootloader) [224632] val0 38 val1 237 val2 190 val3 85[224655] pm8921_r (bootloader) ead_time: secs = 1438575910, h::m:s == 4::25::10, d/m/y = 3/ (bootloader) 7/115 (bootloader) [224675] Current time : 2015-8-3 4:25:10 UTC (bootloader) [241645] pm8921_vreg_disable function, vreg_id = 27 (bootloader) [241667] pm8921_vreg_disable function, vreg_id = 34 (bootloader) [241693] pm8921_vreg_disable function, vreg_id = 35 (bootloader) [241714] pm8921_vreg_disable function, vreg_id = 9 (bootloader) [241736] [ADC] read adc channel VBAT(1): (bootloader) [241755] pm8921_adc_calib_device start (bootloader) [258875] pm8921_adc_calib_device end (bootloader) [268958] [ADC] adc_code = 0x96DE, physical=4044 mV (bootloader) [268981] [BATT] setting_check_perflock_allowance: vol_curr=4 (bootloader) 044 mV vol_limit=3550 mV (bootloader) [269136] [THERMAL]tsens_init: Tsens init done (bootloader) [270160] msm_thermal: CPU0 temperature is 38 C (bootloader) [270182] [INFO][ACPU] get_pvs: ACPU PVS: Fast (bootloader) [270205] [INFO][ACPU] acpuclk_8064_init: Max ACPU freq: 1512 (bootloader) 000 KHz (bootloader) [270258] [DEBUG][ACPU] hfpll_init: Initializing HFPLL4 (bootloader) [270284] [WARNING][ACPU] hfpll_enable: This regulator hfpll_ (bootloader) l2 (40) is LVS type, APPS cannot control it. (bootloader) [270389] [DEBUG][ACPU] hfpll_init: Initializing HFPLL0 (bootloader) [270441] [WARNING][ACPU] hfpll_enable: This regulator hfpll0 (bootloader) (40) is LVS type, APPS cannot control it. (bootloader) [270560] [INFO][ACPU] acpuclk_set_rate: Set cpu0 rate to 918 (bootloader) 000 (bootloader) [270575] [DEBUG][ACPU] acpuclk_8064_set_rate: Switching from (bootloader) ACPU0 rate 1512000 KHz -> 918000 KHz (bootloader) [270827] [DEBUG][ACPU] acpuclk_8064_set_rate: ACPU0 speed ch (bootloader) ange complete (bootloader) [270847] [INFO][ACPU] acpuclk_set_rate: Set cpu0 rate to 151 (bootloader) 2000 (bootloader) [270885] [DEBUG][ACPU] acpuclk_8064_set_rate: Switching from (bootloader) ACPU0 rate 918000 KHz -> 1512000 KHz (bootloader) [271122] [DEBUG][ACPU] acpuclk_8064_set_rate: ACPU0 speed ch (bootloader) ange complete (bootloader) [271134] Enable hboot boot time perflock (bootloader) [271158] Disable uart log to speed up boot time (bootloader) [271170] --pm_check_power_on_status--[273356] Device CID is (bootloader) not powerkey debounce CID (bootloader) [273444] pm8921_vreg_disable function, vreg_id = 19 (bootloader) [273457] pm8921_vreg_disable function, vreg_id = 24 (bootloader) [273476] m7_vreg_init: enable lvs2 for XB (bootloader) [283493] pm8921_vreg_disable function, vreg_id = 16 (bootloader) [283586] start block/size of [dzsystem] is different to [sys (bootloader) tem]. Sync it. (bootloader) [283607] dzsystem: start block = 1310721; size = 3801086 (bootloader) [283626] Update EBR (bootloader) [297559] pm8921_vreg_disable function, vreg_id = 15 (bootloader) [297573] pm8921_vreg_disable function, vreg_id = 17 (bootloader) [297585] pm8921_vreg_disable function, vreg_id = 14 (bootloader) [307778] pm8921_vreg_disable function, vreg_id = 13 (bootloader) [527819] PMIC pm8921_fix_charger_lockup (bootloader) [527876] [ADC] read adc channel VBAT(1): (bootloader) [537946] [ADC] adc_code = 0x96B9, physical=4033 mV (bootloader) [537981] [BATT] batt_vol=4033 mV current=516 mA FSM=3 (bootloader) [537994] PMIC PMIC charger init by user parameters (bootloader) [538011] PMIC revision 1: F4 (bootloader) [538028] PMIC revision 2: 6 (bootloader) [538046] PMIC Restart Reason: Triggered from KPD (power key (bootloader) press) (bootloader) [538238] PMIC [Batt]pm_chg_failed_clear (bootloader) [538299] PMIC [Batt] pm8921_chg_hw_init: FSM=3 after clear c (bootloader) hg fail bit (bootloader) [538312] PMIC PMIC charger init done (bootloader) [538325] [BATT]3 cells initiated. (bootloader) [538356] [PMIC-BMS]r_sense=10 temp_channel=8 id_channel=9 (bootloader) [538369] [ADC] read adc channel BATT_ID(9): (bootloader) [548440] [ADC] adc_code = 0x703F, physical=387 mV (bootloader) [548454] [BATT]: cur_cell is initiated (bootloader) [548468] [PMIC-BMS] set bms_battery_data (cell_id=1). (bootloader) [568616] [PMIC-BMS]BMS init OK -- ocv = 3981000 (bootloader) [568636] [PMIC-BMS]pm8921_bms_read_ocv_updated_flag: OCV_UPD (bootloader) ATE_STORAGE = 0x0 (bootloader) [568656] [PMIC-BMS]pm8921_bms_get_ocv_flag: OCV_UPDATE_STORA (bootloader) GE = 0x0 (bootloader) [568673] radio_is_boot_from_shutdown(): 0, reset_reason=0x77 (bootloader) 665501, hw_reason=0x00000000, ocv_hw_reset=0x00000000 (bootloader) [568686] [ADC] read adc channel BATT_THERM(8): (bootloader) [578759] [ADC] adc_code = 0x822E, physical=30 mV (bootloader) [578771] [ADC] read adc channel VBAT(1): (bootloader) [588841] [ADC] adc_code = 0x96B8, physical=4033 mV (bootloader) [588854] [ADC] read adc channel BATT_ID(9): (bootloader) [598925] [ADC] adc_code = 0x7040, physical=387 mV (bootloader) [598957] [ADC] read adc channel BATT_THERM(8): (bootloader) [609026] [ADC] adc_code = 0x822E, physical=30 mV (bootloader) [619119] [PMIC-BMS]P=75, adc_based_ocv=4067968, T=30 (bootloader) [619177] [BATT] V=4033 mV, T=30 C, OCV=3981 mV, ID=387 mV, I (bootloader) =282 mA, P=75, FSM=3 (bootloader) [619194] radio_boot_mode() poweron_status=0x00000001, reset_ (bootloader) reason=0x77665501, hw_reason=0x00000000 (bootloader) [719442] E0902910 E0902E20 (bootloader) [809464] usb_init_hw: pull up d+ (bootloader) [839486] m7_set_charging(1) (bootloader) [839508] m7_hw_reset_nfc (bootloader) [1013582] m7_init_display (bootloader) [1014614] m7_init_display ID LCD_ID0=20 LCD_ID1=43 (bootloader) [1015731] m7_init_display ID id0=1 id1=0 (bootloader) [1020745] m7_init_display_panelid_940074 (bootloader) [1020758] JDI_RENESAS FULL HD panel (bootloader) [1037839] mdp_clock_init (bootloader) [1068735] mipi_read_back:0 0x21100034 (bootloader) [1090801] mipi_read_back:0 0x21010008 (bootloader) [1112866] mipi_read_back:0 0x21100034 (bootloader) [1112879] id1= 0x340010, id2= 0x80001, id3= 0x340010 (bootloader) [1121454] M7 sharp renesas cmd panel ID=0x940074 (bootloader) [1121470] mipi_dsi_cmds_tx_ext (bootloader) [1253543] [CIR] m7_init_cir, enter. (bootloader) [1253562] [CIR] m7_init_cir, end. (bootloader) [1253584] chipset_bootmode(): reset_reason=0x77665501 (bootloader) [1253788] Board_PID : 203 (bootloader) [1255668] [FAT_ERROR] fat_open_file: can not find MDATA.CFG (bootloader) [1255706] No MDATA.CFG (bootloader) [1257127] Gyro ID = 0xA7 (bootloader) [1258545] Gyro ID = 0xD4 (bootloader) [1258557] Setting gy_type = 2 (bootloader) [1261924] reset rt5501 ret 0 (bootloader) [1261937] m7_init is finished: 18:39:49, Feb 11 2015 (bootloader) [1276554] TZ_HTC_SVC_ENC ret = 0 (bootloader) [1277160] TZ_HTC_SVC_ENC ret = 0 (bootloader) [1277226] valid keybox is existed (bootloader) [1291969] TZ_HTC_SVC_ENC ret = 0 (bootloader) [1307598] TZ_HTC_SVC_ENC ret = 0 (bootloader) [1314850] radio_update_drm_config: read pg2fs_dapkey len (0) (bootloader) failed (bootloader) [1337477] Start Verify: 3 (bootloader) [1352222] ARM11 Boot Mode: 1 (bootloader) [1352235] Platform: HBOOT-8064 (bootloader) [1612466] m7_init_backlight: panel_id=0x940074 (bootloader) [1614494] PWM ic version A2 (bootloader) [1721987] mipi_dsi_cmds_tx_ext (bootloader) [2221390] pm8921_get_cable_status: usb_in=1, dc_in=0 (bootloader) [2221429] Boot/Recovery signature checking... (bootloader) [2443913] TZ_HTC_SVC_HASH ret = 0 (bootloader) [2444316] pm8921_get_cable_status: usb_in=1, dc_in=0 (bootloader) [2458585] setup_tag addr=0x80600100 cmdline add=0x003BF5B4 (bootloader) [2458597] TAG:Ramdisk OK (bootloader) [2459077] TAG:skuid 0x38929 (bootloader) [2459091] TAG:hero panel = 0x940074 (bootloader) [2459104] TAG:engineerid = 0x0 (bootloader) [2459116] TAG: PS ID = 0x0 (bootloader) [2459128] TAG: Gyro ID = 0x2 (bootloader) [2459141] TAG: Compass ID = 0x0 (bootloader) [2459155] TAG:NFC RFID 0xFFFFFFFF (bootloader) [2471445] Device CID is not super CID (bootloader) [2471459] CID is T-MOB010 (bootloader) [2471492] setting->cid::T-MOB010 (bootloader) [2471581] serial number: FA39HW902788 (bootloader) [2471605] Device CID is not powerkey debounce CID (bootloader) [2471618] Device CID is not powerkey debounce CID (bootloader) [2472103] cmdline from boot/recovery image header: console=t (bootloader) tyHSL0,115200,n8 androidboot.hardware=m7 user_debug=31 (bootloader) [2472119] active cmdline length = 925 (bootloader) [2472131] active commandline: (bootloader) [2472143] poweron_status=1 (bootloader) [2472155] reset_status=0 (bootloader) [2472168] board_m7_ul.disable_uart3=0 (bootloader) [2472179] diag.enabled=0 (bootloader) [2472192] board_m7_ul.debug_uart=0 (bootloader) [2472204] userdata_sel=0 (bootloader) [2472216] androidboot.emmc=true (bootloader) [2472228] androidboot.pagesize=2048 (bootloader) [2472240] skuid=0 (bootloader) [2472251] ddt=20 (bootloader) [2472263] ats=0 (bootloader) [2472274] dap=6 (bootloader) [2472286] androidboot.lb=2 (bootloader) [2472298] uif=#000 (bootloader) [2472310] ro.op=0 (bootloader) [2472321] td.sf=1 (bootloader) [2472333] td.td=0 (bootloader) [2472345] td.ofs=328 (bootloader) [2472357] td.prd=1 (bootloader) [2472369] td.dly=0 (bootloader) [2472380] td.tmo=300 (bootloader) [2472392] hlog.ofs=628 (bootloader) [2472404] un.ofs=696 (bootloader) [2472416] imc_online_log=0 (bootloader) [2472428] androidboot.efuse_info=3FSL (bootloader) [2472441] androidboot.baseband=4T.35.3218.16 (bootloader) [2472453] androidboot.cid=T-MOB010 (bootloader) [2472465] androidboot.devicerev=3 (bootloader) [2472478] androidboot.batt_poweron=good_battery (bootloader) [2472490] androidboot.carrier=TMUS (bootloader) [2472502] androidboot.mid=PN0713000 (bootloader) [2472514] androidboot.hasfp=0 (bootloader) [2472526] enable_zcharge=33 (bootloader) [2472538] androidboot.keycaps=qwerty (bootloader) [2472550] androidboot.dq=PASS (bootloader) [2472562] androidboot.mode=normal (bootloader) [2472575] androidboot.serialno=FA39HW902788 (bootloader) [2472587] androidboot.bootloader=1.61.0000 (bootloader) [2472599] bpht=0x3E8 (bootloader) [2472610] lscd=0x1 (bootloader) [2472622] wificd=0x1 (bootloader) [2472634] androidboot.nledhw=0 (bootloader) [2472646] androidboot.ddrmid=(0x6) (bootloader) [2472658] acpu.footprint=FFFFFFFF (bootloader) [2472670] abnrst=0 (bootloader) [2472682] zygote_oneshot=off (bootloader) [2472694] kmemleak=off (bootloader) [2472706] rpm_debug.enable=0 (bootloader) [2472718] console=ttyHSL0,115200,n8 (bootloader) [2472730] androidboot.hardware=m7 (bootloader) [2472742] user_debug=31 (bootloader) [2472757] setup_all_partition_atag: (bootloader) [2472772] Partition[0].name=misc (bootloader) [2472788] Partition[1].name=recovery (bootloader) [2472803] Partition[2].name=boot (bootloader) [2472818] Partition[3].name=system (bootloader) [2472836] Partition[4].name=local (bootloader) [2472853] Partition[5].name=cache (bootloader) [2472869] Partition[6].name=userdata (bootloader) [2472887] Partition[7].name=devlog (bootloader) [2472902] Partition[8].name=pdata (bootloader) [2472917] Partition[9].name=extra (bootloader) [2472933] Partition[10].name=radio (bootloader) [2472950] Partition[11].name=adsp (bootloader) [2472964] Partition[12].name=dsps (bootloader) [2472980] Partition[13].name=radio_config (bootloader) [2472994] Partition[14].name=modem_st1 (bootloader) [2473009] Partition[15].name=modem_st2 (bootloader) [2473025] Partition[16].name=carrier (bootloader) [2473040] Partition[17].name=cdma_record (bootloader) [2473069] Partition[18].name=reserve_1 (bootloader) [2473085] Partition[19].name=reserve_2 (bootloader) [2473100] Partition[20].name=reserve_3 (bootloader) [2473119] Partition[21].name=reserve (bootloader) [2473134] Partition[22].name=control (bootloader) [2473147] Valid partition num=23 (bootloader) [2473726] setting_get_bootmode() = 1 (bootloader) [2473865] pm8921_get_cable_status: usb_in=1, dc_in=0 (bootloader) [2475678] smem 85106000 (phy 8F206000): TZ_HTC_SVC_UPDATE_SM (bootloader) EM ret = 0 (bootloader) [2483719] TZ_HTC_SVC_ENC ret = 0 (bootloader) [2485324] Start Verify: 3 (bootloader) [2535573] TZ_HTC_SVC_ENC ret = 0 (bootloader) [2536013] TZ_HTC_SVC_DISABLE ret = 205643776 (0xC41E000) (bootloader) [3857045] Start Verify: 3 (bootloader) [3898111] [RUMBA_S] firmware version: 3-46-43-33-0-0-0-0 (bootloader) [3898123] [RUMBA_S] ondevice version: 3-46-43-33-4-35-A2-0 (bootloader) [3898136] [RUMBA_S] firmware version already up-to-date (bootloader) [3908175] pm8921_vreg_disable function, vreg_id = 7 (bootloader) [3918191] pm8921_vreg_disable function, vreg_id = 37 (bootloader) [3938208] pm8921_vreg_disable function, vreg_id = 34 (bootloader) [3948223] pm8921_vreg_disable function, vreg_id = 8 (bootloader) [3984084] Start Verify: 3 (bootloader) [3997624] jump_to_kernel: machine_id(4308), tags_addr(0x8060 (bootloader) 0100), kernel_addr(0x80608000) (bootloader) [3997638] -------------------hboot boot time:3997 msec (bootloader) [8] check_ramlog_region: Backup last hboot ramlog. OKAY [ 1.515s] finished. total time: 1.515s . Please your help, Ii you hope this info worth to find or solve.. somiething. Regards..!!!
Angelus96 said: Thanks @nkk71, I did has you suggest. Install de RUU again, it was sucessfull, agains shows the congrats message. A curious thing is that no log file was created in c:/ruu_log... Eventough there is another log from earlier months or dates. . The phone still hangs in the HTC Green logo restart to bootloader, run the command you said: This is the exit: Please your help, Ii you hope this info worth to find or solve.. somiething. Regards..!!! Click to expand... Click to collapse you should increase the buffer size on your command prompt, the output, doesnt show the initial last_dmesg output which would show any emmc errors Question: do you have "active cmdline overflow (xxxx bytes)" showing in bootloader? (towards the bottom)
nkk71 said: you should increase the buffer size on your command prompt, the output, doesnt show the initial last_dmesg output which would show any emmc errors Question: do you have "active cmdline overflow (xxxx bytes)" showing in bootloader? (towards the bottom) Click to expand... Click to collapse I'm sending the complete log. [eespida.MX00051519] ➤ ./fastboot oem last_dmesg ... (bootloader) [8] register_debug_console: new entry ptr=0x85100000 (bootloader) [8] -------------------hboot start (bootloader) [8] chipset_init: DDR: Hynix (bootloader) [8] chipset_ver is 207150E1 (bootloader) [720] PMIC Restart Reason: Triggered from CHG (usb charger i (bootloader) nsertion) (bootloader) [749] pm8921_enable_smpl: smpl=0xD, SMPL_EN_RESET=1 (bootloader) [774] pm8921_enable_smpl: smpl=0x9, SMPL_EN_RESET=0 (bootloader) [794] pm8921_init: poweron_status=0x20 (bootloader) [840] val0 221 val1 53 val2 192 val3 85[864] pm8921_read_ti (bootloader) me: secs = 1438660061, h::m:s == 3::47::41, d/m/y = 4/7/115 (bootloader) [885] pm8921_init: Current time = 2015/8/4 3:47:41 (bootloader) [931] val0 221 val1 53 val2 192 val3 85[953] pm8921_read_ti (bootloader) me: secs = 1438660061, h::m:s == 3::47::41, d/m/y = 4/7/115 (bootloader) [973] hboot read time success 0 (bootloader) [993] Current time = 2015/8/4 3:47:41 (bootloader) [1029] sdhw_7xxx_open: id=4 (bootloader) [19687] sdcc_init_memory_device done (bootloader) [29789] HS clock freq = 48MHz (bootloader) [33461] sdcc_eMMC_target_init() (bootloader) [33487] Initializing MMC host data structure and clock! (bootloader) [34516] clock_set_enable : slot=1, mclk=400000 (bootloader) [38562] Command sent: CMD0 MCI_CMD_REG:400 MCI_ARG:0 (bootloader) [38955] Command sent: CMD1 MCI_CMD_REG:441 MCI_ARG:40FF8000 (bootloader) [39720] Command response received: 40FF8080 (bootloader) [40764] Command sent: CMD1 MCI_CMD_REG:441 MCI_ARG:40FF8000 (bootloader) [41530] Command response received: 40FF8080 (bootloader) [42574] Command sent: CMD1 MCI_CMD_REG:441 MCI_ARG:40FF8000 (bootloader) [43341] Command response received: 40FF8080 (bootloader) [44385] Command sent: CMD1 MCI_CMD_REG:441 MCI_ARG:40FF8000 (bootloader) [45151] Command response received: C0FF8080 (bootloader) [45195] Command sent: CMD2 MCI_CMD_REG:4C2 MCI_ARG:0 (bootloader) [46572] Command response received: 01E04068 (bootloader) [46592] Decoded CID fields: (bootloader) [46612] Manufacturer ID: 90 (bootloader) [46630] OEM ID: 0x14A (bootloader) [46649] Product Name: HBG4e (bootloader) [46669] Product revision: 0.1 (bootloader) [46690] Product serial number: 03BD01E0 (bootloader) [46710] Manufacturing date: 0 2001 (bootloader) [46754] Command sent: CMD3 MCI_CMD_REG:443 MCI_ARG:20000 (bootloader) [47560] Command response received: 00000500 (bootloader) [47605] Command sent: CMD9 MCI_CMD_REG:4C9 MCI_ARG:20000 (bootloader) [49023] Command response received: 8A4040D2 (bootloader) [49067] Command sent: CMD7 MCI_CMD_REG:447 MCI_ARG:20000 (bootloader) [49872] Command response received: 00000700 (bootloader) [49926] Command sent: CMD8 MCI_CMD_REG:448 MCI_ARG:0 (bootloader) [50722] Command response received: 00000900 (bootloader) [79402] Decoded CSD fields: (bootloader) [79421] cmmc_structure: 3 (bootloader) [79440] card_cmd_class: F5 (bootloader) [79460] write_blk_len: 512 (bootloader) [79479] read_blk_len: 512 (bootloader) [79498] r2w_factor: 2 (bootloader) [79517] sector_size: 3922284 (bootloader) [79536] c_size_mult:7 (bootloader) [79554] c_size: 4095 (bootloader) [79573] nsac_clk_cycle: 100 (bootloader) [79593] taac_ns: 15000000 (bootloader) [79612] tran_speed: 0 kbps (bootloader) [79631] erase_blk_len: 2679456 (bootloader) [79650] read_blk_misalign: 0 (bootloader) [79670] write_blk_misalign: 0 (bootloader) [79689] read_blk_partial: 0 (bootloader) [79709] write_blk_partial: 0 (bootloader) [79729] Card Capacity: llu Bytes (bootloader) [79751] Read timeout set: 149999990 ns (bootloader) [79773] Write timeout set: 599999960 ns (bootloader) [79818] Command sent: CMD6 MCI_CMD_REG:C46 MCI_ARG:3B90100 (bootloader) [80620] Command response received: 00000900 (bootloader) [81666] Command sent: CMD13 MCI_CMD_REG:44D MCI_ARG:20000 (bootloader) [82473] Command response received: 00000900 (bootloader) [83500] clock_set_enable : slot=1, mclk=48000000 (bootloader) [83545] Command sent: CMD6 MCI_CMD_REG:446 MCI_ARG:3AF0100 (bootloader) [83568] Command response received: 00000900 (bootloader) [83612] Command sent: CMD13 MCI_CMD_REG:44D MCI_ARG:20000 (bootloader) [83636] Command response received: 00000E00 (bootloader) [83680] Command sent: CMD13 MCI_CMD_REG:44D MCI_ARG:20000 (bootloader) [83704] Command response received: 00000E00 (bootloader) [83748] Command sent: CMD13 MCI_CMD_REG:44D MCI_ARG:20000 (bootloader) [83772] Command response received: 00000E00 (bootloader) [83816] Command sent: CMD13 MCI_CMD_REG:44D MCI_ARG:20000 (bootloader) [83840] Command response received: 00000900 (bootloader) [83885] Command sent: CMD6 MCI_CMD_REG:446 MCI_ARG:3B70200 (bootloader) [83909] Command response received: 00000900 (bootloader) [83953] Command sent: CMD13 MCI_CMD_REG:44D MCI_ARG:20000 (bootloader) [83977] Command response received: 00000E00 (bootloader) [84021] Command sent: CMD13 MCI_CMD_REG:44D MCI_ARG:20000 (bootloader) [84045] Command response received: 00000E00 (bootloader) [84089] Command sent: CMD13 MCI_CMD_REG:44D MCI_ARG:20000 (bootloader) [84113] Command response received: 00000E00 (bootloader) [84157] Command sent: CMD13 MCI_CMD_REG:44D MCI_ARG:20000 (bootloader) [84181] Command response received: 00000E00 (bootloader) [84225] Command sent: CMD13 MCI_CMD_REG:44D MCI_ARG:20000 (bootloader) [84249] Command response received: 00000E00 (bootloader) [84293] Command sent: CMD13 MCI_CMD_REG:44D MCI_ARG:20000 (bootloader) [84317] Command response received: 00000900 (bootloader) [85372] Command sent: CMD8 MCI_CMD_REG:448 MCI_ARG:0 (bootloader) [85396] Command response received: 00000900 (bootloader) [85820] Command sent: CMD13 MCI_CMD_REG:44D MCI_ARG:20000 (bootloader) [85844] Command response received: 00000900 (bootloader) [85864] erase_grpsize: 31 (bootloader) [85883] erase_grpmult: 31 (bootloader) [85901] wp_grpsize: 15 (bootloader) [85920] wp_grpen: 1 (bootloader) [85938] perm_wp: 0 (bootloader) [85956] temp_wp: 0 (bootloader) [85974] part_config: 0 (bootloader) [85993] erase_group_def: 1 (bootloader) [86012] RST_n_Function: 1 (bootloader) [86031] user_wp: 0 (bootloader) [86076] Command sent: CMD17 MCI_CMD_REG:451 MCI_ARG:0 (bootloader) [86099] Command response received: 00000900 (bootloader) [86578] Command sent: CMD17 MCI_CMD_REG:451 MCI_ARG:3FFDF (bootloader) [86602] Command response received: 00000900 (bootloader) [86840] Command sent: CMD17 MCI_CMD_REG:451 MCI_ARG:40000 (bootloader) [86864] Command response received: 00000900 (bootloader) [87061] Command sent: CMD17 MCI_CMD_REG:451 MCI_ARG:40201 (bootloader) [87085] Command response received: 00000900 (bootloader) [87235] Command sent: CMD17 MCI_CMD_REG:451 MCI_ARG:47BB5 (bootloader) [87259] Command response received: 00000900 (bootloader) [87493] Command sent: CMD17 MCI_CMD_REG:451 MCI_ARG:47DB6 (bootloader) [87517] Command response received: 00000900 (bootloader) [87674] Command sent: CMD17 MCI_CMD_REG:451 MCI_ARG:485B7 (bootloader) [87698] Command response received: 00000900 (bootloader) [87851] Command sent: CMD17 MCI_CMD_REG:451 MCI_ARG:487B8 (bootloader) [87875] Command response received: 00000900 (bootloader) [88026] Command sent: CMD17 MCI_CMD_REG:451 MCI_ARG:497B9 (bootloader) [88050] Command response received: 00000900 (bootloader) [88201] Command sent: CMD17 MCI_CMD_REG:451 MCI_ARG:4A7FB (bootloader) [88225] Command response received: 00000900 (bootloader) [88377] Command sent: CMD17 MCI_CMD_REG:451 MCI_ARG:4CFFC (bootloader) [88401] Command response received: 00000900 (bootloader) [88593] Command sent: CMD17 MCI_CMD_REG:451 MCI_ARG:4D7FD (bootloader) [88617] Command response received: 00000900 (bootloader) [89017] Command sent: CMD17 MCI_CMD_REG:451 MCI_ARG:4DFFE (bootloader) [89041] Command response received: 00000900 (bootloader) [107136] Command sent: CMD17 MCI_CMD_REG:451 MCI_ARG:6C001 (bootloader) [107160] Command response received: 00000900 (bootloader) [107351] Command sent: CMD17 MCI_CMD_REG:451 MCI_ARG:6FFFF (bootloader) [107375] Command response received: 00000900 (bootloader) [107527] Command sent: CMD17 MCI_CMD_REG:451 MCI_ARG:80000 (bootloader) [107551] Command response received: 00000900 (bootloader) [107749] Command sent: CMD17 MCI_CMD_REG:451 MCI_ARG:807FE (bootloader) [107773] Command response received: 00000900 (bootloader) [107932] Command sent: CMD17 MCI_CMD_REG:451 MCI_ARG:827FF (bootloader) [107956] Command response received: 00000900 (bootloader) [108108] Command sent: CMD17 MCI_CMD_REG:451 MCI_ARG:84800 (bootloader) [108132] Command response received: 00000900 (bootloader) [108828] Command sent: CMD17 MCI_CMD_REG:451 MCI_ARG:8E801 (bootloader) [108852] Command response received: 00000900 (bootloader) [109084] Command sent: CMD17 MCI_CMD_REG:451 MCI_ARG:8E80A (bootloader) [109108] Command response received: 00000900 (bootloader) [109298] Command sent: CMD17 MCI_CMD_REG:451 MCI_ARG:8EA0B (bootloader) [109322] Command response received: 00000900 (bootloader) [109511] Command sent: CMD17 MCI_CMD_REG:451 MCI_ARG:8EA2C (bootloader) [109535] Command response received: 00000900 (bootloader) [109729] Command sent: CMD17 MCI_CMD_REG:451 MCI_ARG:8F42E (bootloader) [109753] Command response received: 00000900 (bootloader) [109947] Command sent: CMD17 MCI_CMD_REG:451 MCI_ARG:8F4AF (bootloader) [109971] Command response received: 00000900 (bootloader) [110879] Command sent: CMD17 MCI_CMD_REG:451 MCI_ARG:8FCB0 (bootloader) [110903] Command response received: 00000900 (bootloader) [111054] Command sent: CMD17 MCI_CMD_REG:451 MCI_ARG:C0000 (bootloader) [111078] Command response received: 00000900 (bootloader) [111273] Command sent: CMD17 MCI_CMD_REG:451 MCI_ARGA7FE (bootloader) [111297] Command response received: 00000900 (bootloader) [111491] Command sent: CMD17 MCI_CMD_REG:451 MCI_ARG:100000 (bootloader) [111515] Command response received: 00000900 (bootloader) [111745] Command sent: CMD17 MCI_CMD_REG:451 MCI_ARG:12FFFF (bootloader) [111769] Command response received: 00000900 (bootloader) [112000] Command sent: CMD17 MCI_CMD_REG:451 MCI_ARG:138000 (bootloader) [112024] Command response received: 00000900 (bootloader) [112217] Command sent: CMD17 MCI_CMD_REG:451 MCI_ARG:140000 (bootloader) [112241] Command response received: 00000900 (bootloader) [112435] Command sent: CMD17 MCI_CMD_REG:451 MCI_ARG:4DFFFF (bootloader) [112459] Command response received: 00000900 (bootloader) [112658] Command sent: CMD17 MCI_CMD_REG:451 MCI_ARG:61FFFF (bootloader) [112682] Command response received: 00000900 (bootloader) [112875] Command sent: CMD17 MCI_CMD_REG:451 MCI_ARG:220000 (bootloader) [112899] Command response received: 00000900 (bootloader) [113074] check pg1fs (bootloader) [117690] check pg2fs (bootloader) [197497] chipset_setting_init (bootloader) [201683] chipset_setting_init: read pid 203 (bootloader) [209282] SECURE_SMEM_STRUCT 85106000 (bootloader) [212805] read_simlock(1450): E05A355E, 245F1667 (bootloader) [213810] radio_init_secure_smem(928): C9F35678, 1 (bootloader) [220062] read_simlock_password(398): 60, 2, B4, 1D (bootloader) [220102] unlock_rec[0] = 0x85109000 (bootloader) [222873] unlock_rec[1] = 0x8510A000 (bootloader) [225637] simlock_passwd 0x85108000 (bootloader) [227814] secure_update_simlock ret = 0 (bootloader) [228200] final simlock 0 (bootloader) [229110] secure_set_simlock ret = 0 (bootloader) [237777] msm_rpm_init: RPM firmware 3.0.16850530 (bootloader) [237817] MPM_SLEEP_TICK: llums (bootloader) [237840] [SYSINFO] DDR: Hynix (bootloader) [237867] [SYSINFO] PVS: Krait:3 Q6:Fast VDDCX:Slow (bootloader) [237888] [SYSINFO] Vdd_dig: 0.5v (bootloader) [237910] hw_ver_id is 207150E1 (bootloader) [237932] speed_bin is 1 (bootloader) [237959] 0x207150E1 CPU-1.7G PMIC-v3.0 (bootloader) [237979] [SYSINFO] 0x207150E1 CPU-1.7G PMIC-v3.0 (bootloader) [237997] [SYSINFO] PMIC version (bootloader) [238022] PMIC revision 1: F4 (bootloader) [238046] PMIC revision 2: 6 (bootloader) [238065] pm8921_check_revision: *revision = 6F4 (bootloader) [238084] [SYSINFO] End PMIC version[238106] (bootloader) eMMC Manufacturer ID: 90 (bootloader) [238126] [SYSINFO] eMMC: Hynix 61079551 sectors 29823 MB (bootloader) [238147] [SYSINFO] eMMC-CID: 90014A48 12345678 40103BD 1E040 (bootloader) 68 (bootloader) [239264] [FAT_ERROR] fat_open_file: can not find RADIOVER.CF (bootloader) G (bootloader) [239296] No RADIOVER.CFG in radio image for WSD version! (bootloader) [240038] [FAT_ERROR] No M$-DOS partition found (bootloader) [240058] [FAT_ERROR] fat_open_file: load bpb fail(-22) (bootloader) [240090] No OPENDSPVER.CFG in adsp image for SSD version! (bootloader) [240666] [SYSINFO] SBL1: 1.010.30.55 (bootloader) [241067] [SYSINFO] SBL2: 1.010.30.52 (bootloader) [241553] [SYSINFO] SBL3: 1.010.30.50 (bootloader) [241960] [SYSINFO] TZ: 1.430.24.15 (bootloader) [241979] [SYSINFO] RPM: 3.0.98.30 (bootloader) [242024] val0 222 val1 53 val2 192 val3 85[242047] pm8921_r (bootloader) ead_time: secs = 1438660062, h::m:s == 3::47::42, d/m/y = 4/ (bootloader) 7/115 (bootloader) [242067] Current time : 2015-8-4 3:47:42 UTC (bootloader) [259059] pm8921_vreg_disable function, vreg_id = 27 (bootloader) [259081] pm8921_vreg_disable function, vreg_id = 34 (bootloader) [259107] pm8921_vreg_disable function, vreg_id = 35 (bootloader) [259128] pm8921_vreg_disable function, vreg_id = 9 (bootloader) [259149] [ADC] read adc channel VBAT(1): (bootloader) [259169] pm8921_adc_calib_device start (bootloader) [276289] pm8921_adc_calib_device end (bootloader) [286372] [ADC] adc_code = 0x96F8, physical=4050 mV (bootloader) [286395] [BATT] setting_check_perflock_allowance: vol_curr=4 (bootloader) 050 mV vol_limit=3550 mV (bootloader) [286550] [THERMAL]tsens_init: Tsens init done (bootloader) [287574] msm_thermal: CPU0 temperature is 29 C (bootloader) [287596] [INFO][ACPU] get_pvs: ACPU PVS: Fast (bootloader) [287619] [INFO][ACPU] acpuclk_8064_init: Max ACPU freq: 1512 (bootloader) 000 KHz (bootloader) [287673] [DEBUG][ACPU] hfpll_init: Initializing HFPLL4 (bootloader) [287699] [WARNING][ACPU] hfpll_enable: This regulator hfpll_ (bootloader) l2 (40) is LVS type, APPS cannot control it. (bootloader) [287804] [DEBUG][ACPU] hfpll_init: Initializing HFPLL0 (bootloader) [287856] [WARNING][ACPU] hfpll_enable: This regulator hfpll0 (bootloader) (40) is LVS type, APPS cannot control it. (bootloader) [287974] [INFO][ACPU] acpuclk_set_rate: Set cpu0 rate to 918 (bootloader) 000 (bootloader) [287989] [DEBUG][ACPU] acpuclk_8064_set_rate: Switching from (bootloader) ACPU0 rate 1512000 KHz -> 918000 KHz (bootloader) [288241] [DEBUG][ACPU] acpuclk_8064_set_rate: ACPU0 speed ch (bootloader) ange complete (bootloader) [288262] [INFO][ACPU] acpuclk_set_rate: Set cpu0 rate to 151 (bootloader) 2000 (bootloader) [288300] [DEBUG][ACPU] acpuclk_8064_set_rate: Switching from (bootloader) ACPU0 rate 918000 KHz -> 1512000 KHz (bootloader) [288537] [DEBUG][ACPU] acpuclk_8064_set_rate: ACPU0 speed ch (bootloader) ange complete (bootloader) [288550] Enable hboot boot time perflock (bootloader) [288574] Disable uart log to speed up boot time (bootloader) [288586] --pm_check_power_on_status--[290804] Device CID is (bootloader) not powerkey debounce CID (bootloader) [290893] pm8921_vreg_disable function, vreg_id = 19 (bootloader) [290906] pm8921_vreg_disable function, vreg_id = 24 (bootloader) [290925] m7_vreg_init: enable lvs2 for XB (bootloader) [300942] pm8921_vreg_disable function, vreg_id = 16 (bootloader) [301035] start block/size of [dzsystem] is different to [sys (bootloader) tem]. Sync it. (bootloader) [301056] dzsystem: start block = 1310721; size = 3801086 (bootloader) [301075] Update EBR (bootloader) [315376] pm8921_vreg_disable function, vreg_id = 15 (bootloader) [315389] pm8921_vreg_disable function, vreg_id = 17 (bootloader) [315402] pm8921_vreg_disable function, vreg_id = 14 (bootloader) [325596] pm8921_vreg_disable function, vreg_id = 13 (bootloader) [545636] PMIC pm8921_fix_charger_lockup (bootloader) [545691] [ADC] read adc channel VBAT(1): (bootloader) [555761] [ADC] adc_code = 0x96D1, physical=4039 mV (bootloader) [555796] [BATT] batt_vol=4039 mV current=483 mA FSM=3 (bootloader) [555809] PMIC PMIC charger init by user parameters (bootloader) [555827] PMIC revision 1: F4 (bootloader) [555845] PMIC revision 2: 6 (bootloader) [555863] PMIC Restart Reason: Triggered from CHG (usb charge (bootloader) r insertion) (bootloader) [556056] PMIC [Batt]pm_chg_failed_clear (bootloader) [556117] PMIC [Batt] pm8921_chg_hw_init: FSM=3 after clear c (bootloader) hg fail bit (bootloader) [556130] PMIC PMIC charger init done (bootloader) [556142] [BATT]3 cells initiated. (bootloader) [556173] [PMIC-BMS]r_sense=10 temp_channel=8 id_channel=9 (bootloader) [556186] [ADC] read adc channel BATT_ID(9): (bootloader) [566256] [ADC] adc_code = 0x7045, physical=387 mV (bootloader) [566269] [BATT]: cur_cell is initiated (bootloader) [566283] [PMIC-BMS] set bms_battery_data (cell_id=1). (bootloader) [586431] [PMIC-BMS]BMS init OK -- ocv = 4035000 (bootloader) [586450] [PMIC-BMS]pm8921_bms_read_ocv_updated_flag: OCV_UPD (bootloader) ATE_STORAGE = 0x0 (bootloader) [586470] [PMIC-BMS]pm8921_bms_get_ocv_flag: OCV_UPDATE_STORA (bootloader) GE = 0x0 (bootloader) [586487] radio_is_boot_from_shutdown(): 1, reset_reason=0xD2 (bootloader) C80851, hw_reason=0x00000000, ocv_hw_reset=0x00000000 (bootloader) [586517] [PMIC-BMS]pm8921_bms_set_ocv_flag: OCV_UPDATE_STORA (bootloader) GE = 0x0 (bootloader) [586530] [ADC] read adc channel BATT_THERM(8): (bootloader) [596601] [ADC] adc_code = 0x8818, physical=22 mV (bootloader) [596613] [ADC] read adc channel VBAT(1): (bootloader) [606683] [ADC] adc_code = 0x96CE, physical=4038 mV (bootloader) [606696] [ADC] read adc channel BATT_ID(9): (bootloader) [616765] [ADC] adc_code = 0x7045, physical=387 mV (bootloader) [616798] [ADC] read adc channel BATT_THERM(8): (bootloader) [626871] [ADC] adc_code = 0x8818, physical=22 mV (bootloader) [636963] [PMIC-BMS]P=77, adc_based_ocv=4071048, T=22 (bootloader) [637021] [BATT] V=4038 mV, T=22 C, OCV=4035 mV, ID=387 mV, I (bootloader) =267 mA, P=77, FSM=3 (bootloader) [637037] radio_boot_mode() poweron_status=0x00000020, reset_ (bootloader) reason=0xD2C80851, hw_reason=0x00000000 (bootloader) [737284] E0902910 E0902E20 (bootloader) [827306] usb_init_hw: pull up d+ (bootloader) [857348] pm8921_get_cable_status: usb_in=1, dc_in=0 (bootloader) [881338] m7_init_display (bootloader) [882371] m7_init_display ID LCD_ID0=20 LCD_ID1=43 (bootloader) [883488] m7_init_display ID id0=1 id1=0 (bootloader) [888502] m7_init_display_panelid_940074 (bootloader) [888514] JDI_RENESAS FULL HD panel (bootloader) [905595] mdp_clock_init (bootloader) [936491] mipi_read_back:0 0x21100034 (bootloader) [958558] mipi_read_back:0 0x21010008 (bootloader) [980623] mipi_read_back:0 0x21100034 (bootloader) [980636] id1= 0x340010, id2= 0x80001, id3= 0x340010 (bootloader) [989212] M7 sharp renesas cmd panel ID=0x940074 (bootloader) [989228] mipi_dsi_cmds_tx_ext (bootloader) [1222214] m7_init_backlight: panel_id=0x940074 (bootloader) [1224230] PWM ic version A2 (bootloader) [1331710] mipi_dsi_cmds_tx_ext (bootloader) [1433087] E0902910 E0902E20 (bootloader) [1523108] usb_init_hw: pull up d+ (bootloader) [1553129] m7_set_charging(1) (bootloader) [1553151] m7_hw_reset_nfc (bootloader) [1703249] [CIR] m7_init_cir, enter. (bootloader) [1703268] [CIR] m7_init_cir, end. (bootloader) [1703290] chipset_bootmode(): reset_reason=0xD2C80851 (bootloader) [1703494] Board_PID : 203 (bootloader) [1705410] [FAT_ERROR] fat_open_file: can not find MDATA.CFG (bootloader) [1705448] No MDATA.CFG (bootloader) [1706867] Gyro ID = 0xA7 (bootloader) [1708275] Gyro ID = 0xD4 (bootloader) [1708287] Setting gy_type = 2 (bootloader) [1711652] reset rt5501 ret 0 (bootloader) [1711664] m7_init is finished: 18:39:49, Feb 11 2015 (bootloader) [1726325] TZ_HTC_SVC_ENC ret = 0 (bootloader) [1726931] TZ_HTC_SVC_ENC ret = 0 (bootloader) [1726995] valid keybox is existed (bootloader) [1741739] TZ_HTC_SVC_ENC ret = 0 (bootloader) [1757435] TZ_HTC_SVC_ENC ret = 0 (bootloader) [1764740] radio_update_drm_config: read pg2fs_dapkey len (0) (bootloader) failed (bootloader) [1772562] chipset_bootmode(): reset_reason=0xD2C80851 (bootloader) [1772797] radio_boot_mode() poweron_status=0x00000020, reset (bootloader) _reason=0xD2C80851, hw_reason=0x00000000 (bootloader) [1772810] enter recovery_offmod_charging (bootloader) [1773099] SecuritySDInit counter = 1 (bootloader) [1773113] [SD_ERR] The project does not support SD card (bootloader) [1773227] E0902910 E0902E20 (bootloader) [1983271] <0>No USB device attached, portsc 0x8C001000 (bootloader) [1983284] <1>usbhost_start failed (bootloader) [2083302] E0902910 E0902E20 (bootloader) [2173323] usb_init_hw: pull low d+ (bootloader) [2203436] No smart SD in device disable detect (bootloader) [2203449] [JAVACARD_ERR] SD/USBDISK Init error (bootloader) [2203463] [INFO][ACPU] acpuclk_set_rate: Set cpu0 rate to 91 (bootloader) 8000 (bootloader) [2203478] [DEBUG][ACPU] acpuclk_8064_set_rate: Switching fro (bootloader) m ACPU0 rate 1512000 KHz -> 918000 KHz (bootloader) [2203728] [DEBUG][ACPU] acpuclk_8064_set_rate: ACPU0 speed c (bootloader) hange complete (bootloader) [2203747] Disable hboot boot time perflock (bootloader) [2204115] ARM11 Boot Mode: 22 (bootloader) [2204134] Platform: HBOOT-8064 (bootloader) [2841760] pm8921_get_cable_status: usb_in=1, dc_in=0 (bootloader) [2841811] Boot/Recovery signature checking... (bootloader) [3261268] TZ_HTC_SVC_HASH ret = 0 (bootloader) [3261899] pm8921_get_cable_status: usb_in=1, dc_in=0 (bootloader) [3299359] setup_tag addr=0x80600100 cmdline add=0x003BF5B4 (bootloader) [3299378] TAG:Ramdisk OK (bootloader) [3300133] TAG:skuid 0x38929 (bootloader) [3300153] TAG:hero panel = 0x940074 (bootloader) [3300171] TAG:engineerid = 0x0 (bootloader) [3300189] TAG: PS ID = 0x0 (bootloader) [3300208] TAG: Gyro ID = 0x2 (bootloader) [3300226] TAG: Compass ID = 0x0 (bootloader) [3300247] TAG:NFC RFID 0xFFFFFFFF (bootloader) [3314522] Device CID is not super CID (bootloader) [3314543] CID is T-MOB010 (bootloader) [3314592] setting->cid::T-MOB010 (bootloader) [3314720] serial number: FA39HW902788 (bootloader) [3314757] Device CID is not powerkey debounce CID (bootloader) [3314776] Device CID is not powerkey debounce CID (bootloader) [3315615] cmdline from boot/recovery image header: console=t (bootloader) tyHSL0,115200,n8 androidboot.hardware=m7 user_debug=31 (bootloader) [3315638] active cmdline length = 946 (bootloader) [3315657] active commandline: (bootloader) [3315675] poweron_status=32 (bootloader) [3315693] reset_status=0 (bootloader) [3315711] board_m7_ul.disable_uart3=0 (bootloader) [3315729] diag.enabled=0 (bootloader) [3315748] board_m7_ul.debug_uart=0 (bootloader) [3315766] userdata_sel=0 (bootloader) [3315784] androidboot.emmc=true (bootloader) [3315802] androidboot.pagesize=2048 (bootloader) [3315820] skuid=0 (bootloader) [3315837] ddt=20 (bootloader) [3315855] ats=0 (bootloader) [3315872] dap=6 (bootloader) [3315890] androidboot.lb=2 (bootloader) [3315907] uif=#000 (bootloader) [3315925] ro.op=0 (bootloader) [3315942] td.sf=1 (bootloader) [3315960] td.td=0 (bootloader) [3315977] td.ofs=328 (bootloader) [3315995] td.prd=1 (bootloader) [3316012] td.dly=0 (bootloader) [3316030] td.tmo=300 (bootloader) [3316048] hlog.ofs=628 (bootloader) [3316065] un.ofs=696 (bootloader) [3316083] imc_online_log=0 (bootloader) [3316102] androidboot.efuse_info=3FSL (bootloader) [3316121] androidboot.baseband=4T.35.3218.16 (bootloader) [3316139] androidboot.cid=T-MOB010 (bootloader) [3316158] androidboot.devicerev=3 (bootloader) [3316177] androidboot.batt_poweron=good_battery (bootloader) [3316195] androidboot.carrier=TMUS (bootloader) [3316214] androidboot.mid=PN0713000 (bootloader) [3316232] androidboot.hasfp=0 (bootloader) [3316250] enable_zcharge=33 (bootloader) [3316268] androidboot.keycaps=qwerty (bootloader) [3316286] androidboot.dq=PASS (bootloader) [3316305] androidboot.mode=offmode_charging (bootloader) [3316323] maxcpus=0 (bootloader) [3316342] androidboot.serialno=FA39HW902788 (bootloader) [3316360] androidboot.bootloader=1.61.0000 (bootloader) [3316378] bpht=0x3E8 (bootloader) [3316396] lscd=0x1 (bootloader) [3316413] wificd=0x1 (bootloader) [3316431] androidboot.nledhw=0 (bootloader) [3316450] androidboot.ddrmid=(0x6) (bootloader) [3316468] acpu.footprint=FFFFFFFF (bootloader) [3316486] abnrst=0 (bootloader) [3316504] zygote_oneshot=off (bootloader) [3316521] kmemleak=off (bootloader) [3316539] rpm_debug.enable=0 (bootloader) [3316558] console=ttyHSL0,115200,n8 (bootloader) [3316576] androidboot.hardware=m7 (bootloader) [3316594] user_debug=31 (bootloader) [3316616] setup_all_partition_atag: (bootloader) [3316639] Partition[0].name=misc (bootloader) [3316664] Partition[1].name=recovery (bootloader) [3316686] Partition[2].name=boot (bootloader) [3316709] Partition[3].name=system (bootloader) [3316736] Partition[4].name=local (bootloader) [3316763] Partition[5].name=cache (bootloader) [3316786] Partition[6].name=userdata (bootloader) [3316814] Partition[7].name=devlog (bootloader) [3316836] Partition[8].name=pdata (bootloader) [3316860] Partition[9].name=extra (bootloader) [3316883] Partition[10].name=radio (bootloader) [3316908] Partition[11].name=adsp (bootloader) [3316930] Partition[12].name=dsps (bootloader) [3316954] Partition[13].name=radio_config (bootloader) [3316976] Partition[14].name=modem_st1 (bootloader) [3316998] Partition[15].name=modem_st2 (bootloader) [3317024] Partition[16].name=carrier (bootloader) [3317046] Partition[17].name=cdma_record (bootloader) [3317090] Partition[18].name=reserve_1 (bootloader) [3317114] Partition[19].name=reserve_2 (bootloader) [3317138] Partition[20].name=reserve_3 (bootloader) [3317167] Partition[21].name=reserve (bootloader) [3317190] Partition[22].name=control (bootloader) [3317208] Valid partition num=23 (bootloader) [3317883] setting_get_bootmode() = 22 (bootloader) [3318043] pm8921_get_cable_status: usb_in=1, dc_in=0 (bootloader) [3321182] smem 85106000 (phy 8F206000): TZ_HTC_SVC_UPDATE_SM (bootloader) EM ret = 0 (bootloader) [3330285] TZ_HTC_SVC_ENC ret = 0 (bootloader) [3332157] Start Verify: 3 (bootloader) [3388979] TZ_HTC_SVC_ENC ret = 0 (bootloader) [3389723] TZ_HTC_SVC_DISABLE ret = 205643776 (0xC41E000) (bootloader) [4720861] Start Verify: 3 (bootloader) [4763578] [RUMBA_S] firmware version: 3-46-43-33-0-0-0-0 (bootloader) [4763597] [RUMBA_S] ondevice version: 3-46-43-33-4-35-A2-0 (bootloader) [4763616] [RUMBA_S] firmware version already up-to-date (bootloader) [4773662] pm8921_vreg_disable function, vreg_id = 7 (bootloader) [4783684] pm8921_vreg_disable function, vreg_id = 37 (bootloader) [4803706] pm8921_vreg_disable function, vreg_id = 34 (bootloader) [4813728] pm8921_vreg_disable function, vreg_id = 8 (bootloader) [4850925] Start Verify: 3 (bootloader) [4865882] jump_to_kernel: machine_id(4308), tags_addr(0x8060 (bootloader) 0100), kernel_addr(0x80608000) (bootloader) [4865902] -------------------hboot boot time:4865 msec (bootloader) [8] check_ramlog_region: Backup last hboot ramlog. OKAY [ 0.050s] finished. total time: 0.050s About the question.. no.. There is no message regarding cmd overflow. I'm attaching a picture of the display, from the bootloader and the fastboot screens. Regards!
Hi @cschmitt, I checked this post, were you publish a generic misc partition. I dont know if it will help in my case, but for what I've seen, the problem it's kind of similar. http://forum.xda-developers.com/showthread.php?t=2739126 I dont know if you some time to check my problem, any suggestion its very welcome. Until now @nkk71 is helping me. Either way, i dont wont to give up on my phone so I'm looking for every help I can. Thanks in advance.
Well, I've unlocked the phone by HTCdev, and flash the recovery with no BCB: ./fastboot flash recovery twrp-recovery-2.7-m7-nobcb.img target reported max download size of 1514139648 bytes sending 'recovery' (11278 KB)... OKAY [ 1.423s] writing 'recovery'... OKAY [ 0.827s] finished. total time: 2.250s Click to expand... Click to collapse Then reboot in bootloader, and access to recovery. and I'm receiving error in mounting the /data and /system partition. E: Could not mount /data and unable to find crypto footer E: Unable to mount '/data' E: Unable to recreate /data/media folder Updating partition details... E: Unable to mount '/data' E: Unable to mount '/system' E: Unable to mount internal storage E: Unable to mount /data/media during GUI startup E:: Unable to moount /data/media/TWRP/.twrps when trying to read settings file E: Unable to find storage partition to mount to USB And that the step i still can't get passed. I don't know what to do to recover all the filesystem... Any ideas?
Bootloader Unlockable: cid: 0x0000 -- plz assist!
Hi, please help me to obtain my oem get_unlock_data, or show me another way to unlock my Moto Z! Thank you. Code: # fastboot devices ZY223----- fastboot # fastboot oem get_unlock_data (bootloader) slot-count: not found (bootloader) slot-suffixes: not found (bootloader) slot-suffixes: not found ... (bootloader) Unlock data: (bootloader) Unlock data unavailable (bootloader) Failed OKAY [ 0.058s] # fastboot getvar all (bootloader) slot-count: not found (bootloader) slot-suffixes: not found (bootloader) slot-suffixes: not found (bootloader) version: 0.5 (bootloader) version-bootloader: moto-msm8996-92.03 (bootloader) product: sheridan (bootloader) board: sheridan (bootloader) secure: yes (bootloader) hwrev: P3B (bootloader) radio: 2 (bootloader) storage-type: ufs (bootloader) ufs: 32GB SAMSUNG KLUBG4G1CE-B0B1 FV=0800 (bootloader) ram: 4GB SAMSUNG LP4 DIE=8Gb M5=01 M6=05 M7=00 M8=08 (bootloader) cpu: MSM8996 (bootloader) serialno: ZY223TK--- (bootloader) cid: 0x0000 (bootloader) channelid: 0x40 (bootloader) uid: 038F8B1700000000000000000000 (bootloader) securestate: oem_locked (bootloader) iswarrantyvoid: no (bootloader) max-download-size: 536870912 (bootloader) reason: Volume down key pressed (bootloader) imei: xxxxxxxxxx (bootloader) meid: (bootloader) date: 01-16-2019 (bootloader) sku: XT1650-03 (bootloader) battid: (bootloader) iccid: (bootloader) cust_md5: (bootloader) max-sparse-size: 268435456 (bootloader) current-time: "Thu Jan 1 0: 2:18 UTC 1970" (bootloader) ro.build.fingerprint[0]: motorola/griffin/griffin:8.0.0/OPL (bootloader) ro.build.fingerprint[1]: 27.76-71-2-3/3:user/release-keys (bootloader) poweroffalarm: 0 (bootloader) ro.build.version.full[0]: Blur_Version.27.271.3.griffin.ret (bootloader) ro.build.version.full[1]: ail.en.US (bootloader) ro.build.version.qcom: LA.UM.6.6.r1-04400-89xx.0 (bootloader) version-baseband: M8996_1239.53.01.126.29.01R SRS (bootloader) kernel.version[0]: Linux version 3.18.71-perf-g63fe64c-0006 (bootloader) kernel.version[1]: 2-gdf10a01 ([email protected]) (gcc ve (bootloader) kernel.version[2]: rsion 4.9.x 20150123 (prerelease) (GCC) (bootloader) kernel.version[3]: ) #1 SMP PREEMPT Tue Sep 25 04:27:10 CDT (bootloader) kernel.version[4]: 2018 (bootloader) xbl.git: git=MBM-NG-V92.03-0-gcdce58f (bootloader) rpm.git: git=MBM-NG-V92.03-0-g722a114 (bootloader) tz.git: git=5b45243-dirty (bootloader) hyp.git: git=5b45243-dirty (bootloader) devcfg.git: git=5b45243-dirty (bootloader) keymaster.git: git=5b45243-dirty (bootloader) cmnlib.git: git=5b45243-dirty (bootloader) cmnlib64.git: git=5b45243-dirty (bootloader) prov.git: git=5b45243-dirty (bootloader) pmic.git: git=MBM-NG-V92.03-0-gcdce58f (bootloader) aboot.git: git=MBM-NG-V92.03-0-gfb81184 (bootloader) qe: (bootloader) frp-state: no protection (77) (bootloader) ro.carrier: reteu
Addendum: I noticed, that in Settings > System > Developer options > OEM unlocking is not set to 'On'! After each Restart the set to 'On' gets lost! This could explain mentioned result: # fastboot oem get_unlock_data (bootloader) slot-count: not found (bootloader) slot-suffixes: not found (bootloader) slot-suffixes: not found ... (bootloader) Unlock data: (bootloader) Unlock data unavailable (bootloader) Failed How can I keep my OEM unlocking setting, or is there a way to enter Fastboot without restart? Thank you!
[email protected] said: Addendum: I noticed, that in Settings > System > Developer options > OEM unlocking is not set to 'On'! After each Restart the set to 'On' gets lost! This could explain mentioned result: # fastboot oem get_unlock_data (bootloader) slot-count: not found (bootloader) slot-suffixes: not found (bootloader) slot-suffixes: not found ... (bootloader) Unlock data: (bootloader) Unlock data unavailable (bootloader) Failed How can I keep my OEM unlocking setting, or is there a way to enter Fastboot without restart? Thank you! Click to expand... Click to collapse You can try a factory reset or LMSA's Flash Rescue option https://forum.xda-developers.com/general/general/update-moto-lenovo-moto-smart-assistant-t3951714 Sent from my Moto E (4) using Tapatalk
Sorry, it took a while, since I first had to obtain another phone; btw. Moto Z play, meanwhile rooted. Factory reset didn't work. I need to see, whether LMSA exe can run on Ubuntu. Never had a Windoze PC. Thanks anyway.
[email protected] said: Sorry, it took a while, since I first had to obtain another phone; btw. Moto Z play, meanwhile rooted. Factory reset didn't work. I need to see, whether LMSA exe can run on Ubuntu. Never had a Windoze PC. Thanks anyway. Click to expand... Click to collapse What software channel is it on? It should be in getvar all as carrier: And in settings/about phone Something like RetUS or RetLA or Att
Sorry it's RetEU Code: ro.carrier: reteu Which should be good for unlocking.
Have you tried leaving it connected to wifi to see if there is an update? Sometimes there is a time delay for the OEM unlock toggle. the device may need to connect to Wifi during that time.
Forgot password for my Lenovo Yoga YT-X705F, how to unlock?
Hey everyone, I got a Lenovo tablet from my friend's company. The employer who has set it up left the company. Now they can't do anything with the tablet. How can I completely reset the device and delete all passwords? ------ I was able to boot into fastboot, but couldn't do anything there: ./fastboot devices HA11GFCA fastboot ./fastboot oem unlock-go FAILED (remote: 'oem unlock is not allowed') fastboot: error: Command failed ./fastboot flashing unlock FAILED (remote: 'oem unlock is not allowed') fastboot: error: Command failed ------ I was also able to boot into Android Recovery. I successfully wiped the cache partition and did wipe data/factory reset. The tablet keeps asking for the password if I boot it. I tried adb sideload with https://mirrors.lolinet.com/firmware/lenovo/Yoga_Smart_Tab/YT-X705F/ but got the instant error: adbd status 1 installation aborted. How can reset the tablet to set it up from scratch? I don't care about any data. Just want to be able to use the tablet. I have no access to the tablet, so I won't be able to toggle the unlock oem button in settings or anything like this... ------ further info: ./fastboot getvar all (bootloader) version:0.5 (bootloader) token:tlN4PSuzbDz8BdNGGFf6d1gA (bootloader) battery-soc-ok:yes (bootloader) battery-voltage:4272671 (bootloader) variant:MTP eMMC (bootloader) unlocked:no (bootloader) secure:yes (bootloader) version-baseband: (bootloader) version-bootloader: (bootloader) logical-block-size:0x200 (bootloader) erase-block-size:0x200 (bootloader) display-panel: (bootloader) off-mode-charge:1 (bootloader) charger-screen-enabled:1 (bootloader) max-download-size: 0x1ff00000 (bootloader) partition-type:userdata:ext4 (bootloader) partition-size:userdata: 0x57e379e00 (bootloader) partition-type:lenovoraw:raw (bootloader) partition-size:lenovoraw: 0x1000000 (bootloader) partition-type:lenovocust:raw (bootloader) partition-size:lenovocust: 0xc800000 (bootloader) partition-type:logdump:raw (bootloader) partition-size:logdump: 0x4000000 (bootloader) partition-type:dpo:raw (bootloader) partition-size:dpo: 0x2000 (bootloader) partition-type:msadp:raw (bootloader) partition-size:msadp: 0x40000 (bootloader) partition-type:apdp:raw (bootloader) partition-size:apdp: 0x40000 (bootloader) partition-type:keymasterbak:raw (bootloader) partition-size:keymasterbak: 0x100000 (bootloader) partition-type:keymaster:raw (bootloader) partition-size:keymaster: 0x100000 (bootloader) partition-type:cmnlib64bak:raw (bootloader) partition-size:cmnlib64bak: 0x100000 (bootloader) partition-type:cmnlib64:raw (bootloader) partition-size:cmnlib64: 0x100000 (bootloader) partition-type:cmnlibbak:raw (bootloader) partition-size:cmnlibbak: 0x100000 (bootloader) partition-type:cmnlib:raw (bootloader) partition-size:cmnlib: 0x100000 (bootloader) partition-type:mcfg:raw (bootloader) partition-size:mcfg: 0x400000 (bootloader) partition-type:syscfg:raw (bootloader) partition-size:syscfg: 0x80000 (bootloader) partition-type:mdtpbak:raw (bootloader) partition-size:mdtpbak: 0x2000000 (bootloader) partition-type:mdtp:raw (bootloader) partition-size:mdtp: 0x2000000 (bootloader) partition-type:dip:raw (bootloader) partition-size:dip: 0x100000 (bootloader) partition-type:mota:raw (bootloader) partition-size:mota: 0x80000 (bootloader) partition-type:limits:raw (bootloader) partition-size:limits: 0x8000 (bootloader) partition-typeem:raw (bootloader) partition-sizeem: 0x10000000 (bootloader) partition-type:config:raw (bootloader) partition-size:config: 0x8000 (bootloader) partition-type:keystore:raw (bootloader) partition-size:keystore: 0x80000 (bootloader) partition-type:misc:raw (bootloader) partition-size:misc: 0x100000 (bootloader) partition-typeersist:raw (bootloader) partition-sizeersist: 0x2000000 (bootloader) partition-type:cache:ext4 (bootloader) partition-size:cache: 0x10000000 (bootloader) partition-type:vendor:raw (bootloader) partition-size:vendor: 0x60000000 (bootloader) partition-type:system:ext4 (bootloader) partition-size:system: 0x100000000 (bootloader) partition-type:devinfo:raw (bootloader) partition-size:devinfo: 0x100000 (bootloader) partition-type:recovery:ext4 (bootloader) partition-size:recovery: 0x4000000 (bootloader) partition-type:boot:raw (bootloader) partition-size:boot: 0x4000000 (bootloader) partition-type:vbmetabak:raw (bootloader) partition-size:vbmetabak: 0x10000 (bootloader) partition-type:vbmeta:raw (bootloader) partition-size:vbmeta: 0x10000 (bootloader) partition-type:dtbobak:raw (bootloader) partition-size:dtbobak: 0x800000 (bootloader) partition-type:dtbo:raw (bootloader) partition-size:dtbo: 0x800000 (bootloader) partition-type:abootbak:raw (bootloader) partition-size:abootbak: 0x100000 (bootloader) partition-type:aboot:raw (bootloader) partition-size:aboot: 0x100000 (bootloader) partition-type:splash:raw (bootloader) partition-size:splash: 0xb00000 (bootloader) partition-type:sec:raw (bootloader) partition-size:sec: 0x4000 (bootloader) partition-typeemowninfo:raw (bootloader) partition-sizeemowninfo: 0x100000 (bootloader) partition-type:fsg:raw (bootloader) partition-size:fsg: 0x180000 (bootloader) partition-typeDR:raw (bootloader) partition-sizeDR: 0x8000 (bootloader) partition-type:mlsp:raw (bootloader) partition-size:mlsp: 0x8000 (bootloader) partition-type:modemst2:raw (bootloader) partition-size:modemst2: 0x180000 (bootloader) partition-type:modemst1:raw (bootloader) partition-size:modemst1: 0x180000 (bootloader) partition-type:dspbak:raw (bootloader) partition-size:dspbak: 0x1000000 (bootloader) partition-type:dsp:raw (bootloader) partition-size:dsp: 0x1000000 (bootloader) partition-type:devcfgbak:raw (bootloader) partition-size:devcfgbak: 0x40000 (bootloader) partition-type:devcfg:raw (bootloader) partition-size:devcfg: 0x40000 (bootloader) partition-type:tzbak:raw (bootloader) partition-size:tzbak: 0x200000 (bootloader) partition-type:tz:raw (bootloader) partition-size:tz: 0x200000 (bootloader) partition-type:rpmbak:raw (bootloader) partition-size:rpmbak: 0x80000 (bootloader) partition-type:rpm:raw (bootloader) partition-size:rpm: 0x80000 (bootloader) partition-type:sbl1bak:raw (bootloader) partition-size:sbl1bak: 0x80000 (bootloader) partition-type:sbl1:raw (bootloader) partition-size:sbl1: 0x80000 (bootloader) partition-type:ssd:raw (bootloader) partition-size:ssd: 0x2000 (bootloader) partition-type:fsc:raw (bootloader) partition-size:fsc: 0x400 (bootloader) partition-type:modem:raw (bootloader) partition-size:modem: 0x5400000 (bootloader) hw-revision:10000 (bootloader) pcbaserialno:8SSP69A6P5SUHA619AG016K (bootloader) serialno:HA11GFCA (bootloader) kernel:lk (bootloader) product:QC_Reference_Phone ------ May someone does have any advice? thanks in advance!
If you can access tablet's Android OS by means of ADB then to remove tablet's FRP-lock you can try this ADB-command sequence - one by one: Code: adb devices adb shell "am start -n com.google.android.gsf.login/" adb shell "am start -n com.google.android.gsf.login.LoginActivity" adb shell "content insert --uri content://settings/secure --bind name:s:user_setup_complete --bind value:s:1" adb reboot
jwoegerbauer said: If you can access tablet's Android OS by means of ADB then to remove tablet's FRP-lock you can try this ADB-command sequence - one by one: Code: adb devices adb shell "am start -n com.google.android.gsf.login/" adb shell "am start -n com.google.android.gsf.login.LoginActivity" adb shell "content insert --uri content://settings/secure --bind name:s:user_setup_complete --bind value:s:1" adb reboot Click to expand... Click to collapse Thanks for your answer. Unfortunately, I'm unable to send adb commands. The only option available is the "Apply update from ADB" in recovery mode. There I can run "adb devices", which shows: HA11GFCA sideload If I try to enter "adb shell..." I got "error: closed" Any further ideas?
ADB Sideload is used to flash Stock ROMs. BTW: If USB-debugging (aka ADB) is enabled on your tablet, then when your unconnected tablet got booted into Stock Recovery Code: adb reboot recovery you of course - after connecting PC with tablet - you can run on PC Code: adb shell "<COMMAND-HERE>" commands.
jwoegerbauer said: ADB Sideload is used to flash Stock ROMs. BTW: If USB-debugging (aka ADB) is enabled on your tablet, then when your unconnected tablet got booted into Stock Recovery Code: adb reboot recovery you of course - after connecting PC with tablet - you can run on PC Code: adb shell "<COMMAND-HERE>" commands. Click to expand... Click to collapse Well, that's the thing here... ADB is not enabled. I'm in Android Recovery where I have the following options: Reboot system now Reboot to bootloader (this get's me to fastboot) Apply update from ADB (which is only ADB sideload, can't send adb commands there) Apply update from SD Card Wipe data/factory reset (already did twice) Wipe cache partition (already did twice) Mount /system View recovery logs Run graphics test Run locale test So basically, the question is: What do I have to do, to be able to use the tablet again? How can I enable ADB without having access to the tablet? Can I enable it with fastboot?
My recommendation: Re-flash tablet's Stock ROM. FYI: An Android device can run in one of these modes Normal ( Android OS ) Recovery Fastboot ( Bootloader ) Sideload