When calling using the default dialer app, the Bluetooth headset audio behaves abnormal. Specifically, while on call, the audio on the earpiece comes from the mic of the earpiece i.e. it loops within the headset.
-Headset works well with other phones. Tested on an older Nokia and on an iphone but not tested on another android device.
-Headset pairs well with SGS2.
-Headset works well with CSipSimple on SGS2.
-All the blips,sounds and responses work well when headset interacts with SGS2, terminate calls, pair/unpair, initiate voice talk.
-SGS2 has the default ROM on it.
Just the actual audio during calling with default dialer is messed up, loops within the headset!
BTW the headset Jabra BT2045.
Thanx
I've installed cognition and the bluetooth audio works fine now!
Related
I upgraded my XV-6800 to 6.1 using the Verizon ROM and am having a very annoying issue with Microsoft Voice Command 1.6 (it works somewhat).
The issue is this:
Push button on headset to activate MSVC
***Beep*** through headset
Me: Call Home
Msvc: Call Home? (through headset)
Me: Yes
DIAL TONES THROUGH THE PHONES SPEAKER
Bluetooth headphone switches back on once connected
The only way I have found that it works normally is when I have my Plantronics 8010 main headset piece set to "Wireless Stereo" and "Hands-Free" and I have the little icon of the stereo headsets showing on the top (where the start menu is). If that icon isn't there then the phone goes back to behaving the way it was above.
I've tried this with non-stereo headsets (mono only) and it plays the damn dial tones through the speaker on the phone. The other thing is that instead of the ringtone coming through the headset on an incoming call it goes through the phones speaker- when I hit the headset button it connects the call properly.
Can this be a conflict with that garbage software called Cyberon Voice Dialer? Anyone else have this issue and was there a fix?
Thanks!
I wasn't aware this was a bug. This is how it's always operated for me and I thought it was a purposeful function of the software. Besides, I think that dialing sound would get really annoying in my ear.
EDIT: The ringtones play through my headset, though. It's just the dialing sound that doesn't. What are your Phone settings in MSVC?
Ok- just uninstalled MSVC and re-installed (for the the third time) and now the incoming calls play the headset fine but the dial tones play out of the speaker on the handset.
I'm pretty sure this is a bug as it never used to do this on the XV-6700 running MSVC 1.5.
It's honestly been that way on every version I've personally used. It doesn't seem like a bug to me. It's specifically jumping out of the Bluetooth audio bridge to play it, then back in. That seems deliberate to me. Besides, it's an effect of the phone, itself, doing the dialing. Kind of a psychological thing. Besides, I wouldn't want that annoying sound buzzing in my ear.
I got in on the Samsung WEP470 deal at NewEgg to use with my G Tab. But in testing it, I've noticed that it will pair, no worries, but it won't connect.
My goal is to use it to replace the rubbish internal mic for skype calls when my daughter is traveling.
Any ideas? Does anyone have a BT earpiece that does connect and can work for calling?
Thanks!
--mop
I have Motorola S7HD stereo bluetooth headset and it pairs and works great with my G Tab running latest TnT Lite. I use them to listen to pandora, and watch tv/movies from my media server using plugplayer. I haven't tested yet for video conferencing, but it should work for that too. I'm too lazy to convert my Skype friends to oovoo or whatever it is, I'm hoping Skype will just finally add video to Android Skype soon.
Good luck.
MC
Only A2DP Bluetooth
I have a Plantronics Blackbeat 903 which also works perfect for listening (through A2DP), but that's all I've been able to achieve. I mean, I can not make it work as audio input, just output. I guess g tab doesn't have the hands-free (HFP), or headset (HSP) Bluetooth profiles required to do that. So, even though I have Skype installed and I can make calls and listen via bluetooth, the built-in mic is still being used during the call instead of the Bluetooth headeset mic.
I've been googling around and still have found nothing about whether that functionality can be enabled. If you guys find something, let me know.
Anyone have BT headset/microphone combo that works?
jeanux said:
I have a Plantronics Blackbeat 903 which also works perfect for listening (through A2DP), but that's all I've been able to achieve. I mean, I can not make it work as audio input, just output. I guess g tab doesn't have the hands-free (HFP), or headset (HSP) Bluetooth profiles required to do that. So, even though I have Skype installed and I can make calls and listen via bluetooth, the built-in mic is still being used during the call instead of the Bluetooth headeset mic.
I've been googling around and still have found nothing about whether that functionality can be enabled. If you guys find something, let me know.
Click to expand...
Click to collapse
I have a Rocketfish RF-MAB2 stereo headset that works for audio output but not microphone input (works ok on my blackberry tour). Just tried Sipdroid and while I could hear fine, audio was definitely going through the microphone on the G-Tablet ("sounds like you are under-water").
Bummer. I would like to be able to hear and talk through this set of headphone/microphone. My Emerson EM227 will pair but not connect. Is this an issue where the proper bluetooth stack isn't present?
I was trying my new bose Bluetooth headset today and found that i cannot use it on gtlak video calls, is the problem from my headset or it is not enabled from gtalk app?
update: turns out there is an option for bluetooth while in call but couldn't switch to it, dono if the problem is from my headset, anyone tried it ?
thx
Sent from my GT-I9300 using Tapatalk 2
I have the same problem, The voice gets routed to the bluetooth headset, but nothing happens afterwards, cannot hear or be heard!
When changing the audio the the speaker or earpiece, audio works fine.
I have a Jabra Extreme2 and on LFB latest stock with no root or any modifications.
This only happens on Gtalk, otherwise the bluetooth works fine with calls and anything else, oh also skype is funny with the bluetooth as well, not stable!
Is it a general thing of my combination of software, SGS3 and Jabra Extreme2?
Any help would be appreciated. Thank you.
My Galaxy S3 connects to my car's Bluetooth and allows me to make and receive calls. However, notification sounds are not playing via Bluetooth. It seems that the phone is sending the sounds to bluetooth but the car system doesn't play them. The result is that I have no audible indication when I receive a message when my phone is connected to my car's Bluetooth system.
Similarly, if I try to use S-Voice it would seem that the phone is expecting sound input via bluetooth and not from the phone's built in microphone, which means it does not detect any sound. Audio output also does not play on the phone or via bluetooth.
Presumably my car's bluetooth does not support receiving such sounds - only supporting basic phone functions. I cannot find any configuration settings on the car system to enable it.
Is there any way of stopping my phone trying to send notification sounds to bluetooth and to just play these via the phone's speaker but still allowing the phone to be connected to bluetooth for making and receiving calls? Similarly can I force S-Voice to use the phone's microphone and speaker if it cannot be made to work with my car's bluetooth?
S Voice on AT&T Galaxy Note Bluetooth In Car
First off, I am having the same issue, I tried even holding down talk / voice command button on steering wheel, No luck. I have a 2012 Kia Optima GLI full Nav and Voice command options. I have my Note working nicely with Team Perfection ICS R2, S Voice is fully functional except:
When using S voice in car connected to car Bluetooth (pushing search button on bottom of phone face) it tries to accept audio input from car Mic over Bluetooth, but never receives input. Can't find any setting in S voice app to change input setting from car to phone mic. Not sure why the car mic doesn't work other than just not supported by the s voice app? Anyone out there know of a fix or work around?
s voice does not work over any bluetooth
I have tried this on multiple Bluetooth devices. It does't hear anything and it responds with a very feint. Robotic distorted voice. Music plays well on Bluetooth but I have had problems with phone calls.so maybe the problem is the Bluetooth stack rather than s-voice.
I am having the same problem with SGS3. When I was testing s-voice on SGS2 you could set s-voice to use SGS speaker and mic for voice commands and notifications. Now I can't find that toggle.
BT Devices , yes....Car BT, No
It works fine on my headsets. IT doesn't work in my car.
spanout has nailed the problem. It apparently does NOT use the mic in the phone when hooked to BT. The car is not designed to pass voice to the BT. The car BTs typically have their own voice control, and as such is handling the voice itself.
When you think about it, it makes sense. Less chance for outside noise if it takes the input from the mic on your BT device, as likely the phone will not be close to your mouth.
The only way we'll get it to work is to find a way to enable the mic on the phone when on BT. Probably would need help from the DEVs here on that.
im in the same boat!
the real kicker is SIRI can send her voice over the car speakers and utilize the car mic.
so logic says, its purely a BT setting on the software ice cream and s3.
any apps for that? or any dev's want to chime in?
im using a very simple bmw bluetooth (not idrive).
it cant stream music, so i dont know how the fak siri can send her voice over it.
I have this problem with my SGS3, and had it with the SGS2 in my Ford S-Max. The problem is Ford's. Using the phone with a parrot car kit has all notifications fired over bluetooth.
georgedeaves said:
I have this problem with my SGS3, and had it with the SGS2 in my Ford S-Max. The problem is Ford's. Using the phone with a parrot car kit has all notifications fired over bluetooth.
Click to expand...
Click to collapse
same with a jabra freeway with latest v3 firmware and a galaxy s3 i9300xxblfb.
very dissapo9nted, finaly a fast, accurate voice app that understands my music requeats and i cant use it in the car!
Yakumo.unr said:
same with a jabra freeway with latest v3 firmware and a galaxy s3 i9300xxblfb.
very dissapo9nted, finaly a fast, accurate voice app that understands my music requeats and i cant use it in the car!
Click to expand...
Click to collapse
so switching the s-voice and nav to MONO works with bluetooth, but the a2dp or whatever protocol it uses normally doesnt work.
however calls are done using a2dp, so wtf?
can someone make a quick app that just forces ONLY s-voice and NAV in to mono?
the apps out there make everything go mono or nothing at all...sucks for voice call quality
I needed to revive this thread as a search for my problem led me to it.
1) Is anyone able to play a video on the S3 (GT-I9300 4.1.2) and stream the sound from the video to the car while connected via Bluetooth?
I am not.
2) S3 notification sounds do not play via the car's speakers when receiving a text message or email etc.
I can make and receive calls just fine and even play music from the S3 via BT by selecting the phone from the list of devices on the car's screen.
Blutooth / Voice App Issue - SOLVED
First of all this does work on my 2009 Highlander, but it's a bit Kuldgy.
BT Mono allows my voice app to work, but by itself it's not a solution. You have to activate it manually before using S-Voice, Google Voice or AVX. It opens the connection and has to be activated each time or it can be set to reconnect automatically…. Killing my radio.
Download the free version (I can’t access the play store to give you the link) and see if it works manually. If it works for your test then the rest should work as well.
Install Tasker:
Create a task to keep the screen from locking when your state is Bluetooth connected to the car device.
Create a Task (you don’t need it in a profile)
- Set bluetooth on (in case it’s off)
- Load BT mono (with auto on enabled in the BT mono app)
- Wait ~400MS
- Load App AVX (or S-Voice, or whatever)
- Wait 9 seconds
- Kill BT mono
- Kill BT mono root (it wasn’t always killing BT mono)
I’ve been thinking about trying to simply reboot the BT (BT off then wait then BT on) rather than kill an app.
You can add the task to your home screen as a widget…. Still not safe to do while driving.
That’s where GMD Gestures comes in. You set a swipe command, I use 2 fingers down, to launch the task.
Seems to work pretty well. I can keep my eyes on the road and still use voice commends. You do need to hang up the phone when you’re done talking, but I had to do that with Siri.
I still wish there was a force mono on all connections app, but I still haven’t seen one. AVX just added the ability to force mono for speech, it’s worked for other people, but I’m still trying to figure out why it doesn’t work for me (he's had reports that the Note 2 doesn't like his solution, Kudos to him for trying to add this).
Hope this helps
****UPDATE****
BT Mono may work for me because I'm rooted. According to the app on the store (pro version) Apparently Samsung, in an effort to prevent call recording, blocks the ability to re-route the microphone.
I am experiencing the following problem with my GT-S5282:
Even though both music and normal calls are transmited just fine to the Bluetouth headset (MW600), there is no voice when making a VoIP call (I am using the build-in Andoid's SIP support). The headset is showing the time of the call and allows to end it and so on, but there is no sound. VoIP works fine on GT-S5282 without the headset and I didn't have this problem with the same headset on HTC Incredible S.
Probably the same problem as described here: http://forum.xda-developers.com/galaxy-s3/help/skype-viber-voip-bluetooth-headset-t2405497