Lost my nand of my stock rom now all i have is cyanogenmod. Anybody have a stock rom I could download? Thanks!
Sent from my evo 3d running cm7
I'm guessing your rooted. Look down a couple pages down xhausx has a stock rooted ROM for you
Related
Hello,
I am trying to get viperROM to work correctly on my Evo 3D. I would have posted in that thread but I don't have 10 posts yet so I'm not allowed...
I wasn't thinking and I accepted the OTA update when it came out.
So I used this tutorial and did the HTC unlock and then flashed CWM 4.0.1.4 to my phone.
I used CWM to back up my stock ROM, then I used it to install viperROM.
Well, it worked except for the fact that the WiFi wouldn't turn on. It just said "Error".
I have been reading these forums for hours now and my eyes are glazing over but I figure it's something to do with the radio I guess?
I tried to do some forum searches but the search function is apparently down for nightly maintenance.
Anyways, I restored my backup and thank God WiFi is working again.
Can someone please point me in the right direction to fixing this?
Thanks.
Did you do a full wipe before you installed viperRom?
I don't believe you can use Viperrom on your phone because it is a 2.3.3 rom and your kernel is only for 2.3.4 roms. When you took the OTA and your phone upgraded to the 1.50 bootloader you lost the ability to install kernels and write to the boot partition. With out the proper kernel you will have problems running any 2.3.3 roms properly. Look for a rom that is already upgraded to 2.3.4 and give that a try. For now I would flash back to stock and wait for Viperboy to update his rom.
help please?
I try RCMIX 2.2.3 and recover HTC Rom but stcuk boot HTC logo.
Can i replaces viperROM ? how i can?
I'm Newbie.
Thanks
Konfuzion said:
Did you do a full wipe before you installed viperRom?
Click to expand...
Click to collapse
Yes, I did both of the wipes that it prompted before installing it.
cruise350 said:
I don't believe you can use Viperrom on your phone because it is a 2.3.3 rom and your kernel is only for 2.3.4 roms. When you took the OTA and your phone upgraded to the 1.50 bootloader you lost the ability to install kernels and write to the boot partition. With out the proper kernel you will have problems running any 2.3.3 roms properly. Look for a rom that is already upgraded to 2.3.4 and give that a try. For now I would flash back to stock and wait for Viperboy to update his rom.
Click to expand...
Click to collapse
I never would have thought of that!
Thanks both of you for your help
That's right looking ti take this phone back to stock. I can't seem to find a guide for it. Back to gb. Actually running ics
Sent from my ADR6425LVW using Tapatalk
You mean like the one in the dev forum that says [Guide] unrooting your Rezound?
Sent from my Vizio tablet using xda premium
ajftl said:
That's right looking ti take this phone back to stock. I can't seem to find a guide for it. Back to gb. Actually running ics
Sent from my ADR6425LVW using Tapatalk
Click to expand...
Click to collapse
Check this out
http://forum.xda-developers.com/showthread.php?t=1486220
are you running leak ics rom or ics custom rom?
i came back to stock from senseless ics.
what i did was
first, went back to stock rooted by flashing stock kernel and stock rooted rom.
then flashed stock recovery then re-locked the bootloader
then finally flashed ruu.zip from fastboot (1.02.605.6).
stock kernel: team bamf's unsecured stock
stock rooted rom: http://www.scottsroms.com/downloads.php?do=file&id=55
stock recovery: http://db.tt/tw5m33ZG
re-lock bootloader: fastboot oem lock
ruu.zip: http://www.scottsroms.com/downloads.php?do=file&id=38
or ruu.exe: http://www.scottsroms.com/downloads.php?do=file&id=37
I currently have the CleanRom ICSE 2.3, and would like to go back to the rooted stock rom, will this guide work for me...
thanks guys... im not re locking bootloader since what i really wanted was getting back to gb from ics.. and that guide up here worked... thanks
im running a gb rom now it boots and all work good but i cant still upgrade kernels.. i did everything with the exception of locking bootloader.. when trying to upgrade kernel keeps telling me main version is older?
UPDATE
the only way i can upgrade kernels is by pushing them using adb ..at least it works that way
tjefferson3 said:
I currently have the CleanRom ICSE 2.3, and would like to go back to the rooted stock rom, will this guide work for me...
Click to expand...
Click to collapse
not sure, but i doubt it will work
since mainver has been updated.
u can still try though.
if it doesn't work, u just need to re-flash
the kernel and the rom i think.
Does anyone know if there is a deodexed version of the stock Rogers EVO 3D GSM ROM based on the latest update 1.20.631.3? I know there is the KingCobra ROM but I'm looking for something that is even closer to stock.
Stock Rooted Rogers ROM
carn2k said:
Does anyone know if there is a deodexed version of the stock Rogers EVO 3D GSM ROM based on the latest update 1.20.631.3? I know there is the KingCobra ROM but I'm looking for something that is even closer to stock.
Click to expand...
Click to collapse
Anyone?
Hye...1st of all,sorry for my bad english...
I have questions about installing mdeejay virtous ics 3.0.2 rom
My e3d is hboot .0011 s-on,
i am using 4ext recovery
1)can i safely install the new firmware without s-off
2)if it safe,can anyone show me how to install it till.it complete?
Sorry if this question has been asked before,sorry for my nood question...
Thx...hope to get answer asap...
without S-OFF firmware won't upgrade, but you still can flash the rom, i tried this morning, i am S-ON and all went fine (needed to flash boot.img separatly).
i am now back to LeeDroid's rom and waiting for his ICS version or at least an ICS version of his tweaks
Tq very much...
The camera worked properly?2d n 3d?also how about battry life,
tarassor said:
i am now back to LeeDroid's rom and waiting for his ICS version or at least an ICS version of his tweaks
Click to expand...
Click to collapse
He already has an ICS Leedroid tweaks. Look in the dev section.
No you can not install the firmware with s on however as stated you can flash the Rom and what ever you do don't even think of flashing the firmware with s on you need to be s off to do that
sent from my EVO 3d x515m s off using xda premium
This is quite nice Rom, but procedure is badly described. I tried Rom but it restarted itself couple of times to i reverted back to Cobra. If this doesn't improve i'll also wait for LeeDroid or Cobra.
I've been running MeanRom ICS. I wanted to give the sprint stock version a try. What's the best way to do this?
Thanks.
Oh, read the forums, I think about a gizzilion boot loops, problems, issue's
Sent from my HTC EVO 3D X515m using xda premium
Well since you can't update ota if you are rooted, just find a stock rooted rom and flash it just like any other rom. As you SHOULD know from reading, you can't run the new kernel without the new hboot, so update to that if you want to use the new kernel.
mtnbkr said:
I've been running MeanRom ICS. I wanted to give the sprint stock version a try. What's the best way to do this?
Thanks.
Click to expand...
Click to collapse
The 2.4 version I do believe was based on the VM leak. His newest 2.6 version is based on the latest Sprint release, and works just great. I have been running it with no issues.
If you have S-off , you can upgrade the hboot and kernel to the latest. If not, you can leave the kernel and hboot you have and just flash the rom.
Just and idea.