Hii all
I'm from India, using Sony Ericsson Mini pro (u20i) and still in Airtel 2G and here Telecom Operators just started to roll out 3G services. Currently Airtel, Vodafone and TATA Docomo providing 3G services here.
I checked my handset compatibility both in Airtel and Vodafone websites. According to them my Mini Pro is 3G enabled but based on WCDMA technology so i get low speed 3G upto 384kbps. So they are suggesting me to upgrade HSPA enabled handsets that supports higher speed 3G that varies from 14mbps to 21mbps. I have been told that 3g on WCDMA really sucks as compared to HSPA enabled handsets.
According to Tata Docomo which provides HSPA + (also dubbed as 3.5G+) service and as they mentioning in their 3G handset compatibility list that Mini pro supports HSPA and it is a superior 3G ready handset. Sony Ericsson Indian website also states that it has Turbo 3G and HSPA enabled. Even in my handset box it has clearly mentioned that handset has HSPA and Turbo 3G.
Now in the handset settings menu, there is an option to select network mode which only gives only 3 options that is WCDMA only, GSM only and GSM/WCDMA.
So which one is true? Is my Mini Pro HSPA ready handset or only supports WCDMA? What Sony Ericsson and Tata Docomo states is true? or Airtel and Vodafone? Which Sim to buy? Im in great confusion. Please help in this regard.
it is HSPA ready. in spain, with vodafone i get the H icon of HSPA
Its hspa bro..im using mini pro nd while using mtnl hspa I got 3 mbps speed...our handset supports upto 7 mbps speed I think...
Sent from my U20i using XDA App
Yeah it IS HSPA enabled, it uses it by default usually, which adds to the miserable battery life if there is no 3g or HSPA signal available, as it continually scans, looking for it.
Mine actually uses HSPA by default, dropping to 3g when the signal is poor and down to G when it loses 3g altogether. (H, 3g, G respectivly).
Rooted phones can also have the full power of the connectivity chip unlocked to achieve up to 8mbps depending on provider and reception etc.
I'm with O2 UK
Quickly knowing your phone is via its signal which either H, E or G on top of the signal strength bars. Mine usually showing H.
I think they goes like this:
H - HSPA
E - Edge
G - 2G or GPRS
Thank u all for clearing my doubts. Got relief now. Really appreciated your help.
what about the mini?
Sideromelane said:
Rooted phones can also have the full power of the connectivity chip unlocked to achieve up to 8mbps depending on provider and reception etc.
Click to expand...
Click to collapse
Excuse me? What aside from 802.11n support (which has nothing to do with mobile provider) can be "unlocked" in a rooted phone?
death_syndrome said:
what about the mini?
Click to expand...
Click to collapse
LOL, Mini and Mini Pro hardware is identical in almost every way. In short, yes.
I moved to Australia this week. I brought my MoPho with me. It was a hassle getting it to work but i figured it out and thought to tell you how it went. I put a Vodafone AU SIM card in my phone but 3G would not work. I knew for a fact i was in a coverage area for 850Mhz 3G so I was pretty annoyed it would not work. Turns out with the Photon you have to manually ass the APN for Vodafone and probably a few others. I was able to get all the settings I needed from here.
http://ausdroid.net/apns/
tl;dr Sometimes when abroad you need to manually add the APN for the carrier.
I need to do that for my carrier too (Slingshot NZ, 850/2100Mhz) but after that it works fine, 3G GSM data is borked on the current ICS build though.
Ya. Im going to wait awhile before i put on another custom ROM. Still trying to get used to everything in Australia. Cant risk being without a phone. Im going to keep an eye on cm9. Until then i only have the precious data connection on my phone which is caped at 4GBs :'(. I miss unlimited.
0mfgroflmao said:
I need to do that for my carrier too (Slingshot NZ, 850/2100Mhz) but after that it works fine, 3G GSM data is borked on the current ICS build though.
Click to expand...
Click to collapse
hodiedodie said:
I moved to Australia this week. I brought my MoPho with me. It was a hassle getting it to work but i figured it out and thought to tell you how it went. I put a Vodafone AU SIM card in my phone but 3G would not work. I knew for a fact i was in a coverage area for 850Mhz 3G so I was pretty annoyed it would not work. Turns out with the Photon you have to manually ass the APN for Vodafone and probably a few others. I was able to get all the settings I needed from here.
http://ausdroid.net/apns/
tl;dr Sometimes when abroad you need to manually add the APN for the carrier.
Click to expand...
Click to collapse
Yea ill be down under in January
The telstra pre pay sim works better than vodafone .
Sent from my MB855 using xda premium
Well. Thats a tricky question. Bellow i will list the different networks and what they support compared to the photon. Currently all three major carriers can provide 3G to the Photon. Telstra simply has a better network but it has nothing to do with how it interacts with the phone. For both Optus and Vodafone so far i have had to manually set the APNs. It was a ***** with the Optus one because of the separate APNs for internet and mms. Even though optus doesnt have umts850 and the photon doesnt have umts900 i am downloading about 4Mbs in East Killara (Suburb by Sydney) throught Optus' 2100 single band HSDPA+. I have not tested Telstra because they are so freaking expensive.
Photon supports:
800/1900 MHz (EV-DO Rev. A),
GSM 850/900/1800/1900 MHz,
UMTS/WCDMA 850/1900/2100 MHz (HSPA+ at 14.4 Mbit/s)
OPTUS/Amaysim: (I only recommend for when time is being spent in Capital Cities that support 2100 single band)
GSM - 900/1800
UMTS - 900/2100 (2100 single band)
TELSTRA:
2G - 900/1800
3G - 850/2100 (850 is NextG)
LTE - 1800
Vodafone:
2G - 900/1800
3G - 850/900/2100
ttkyles said:
Yea ill be down under in January
The telstra pre pay sim works better than vodafone .
Sent from my MB855 using xda premium
Click to expand...
Click to collapse
vodafone's 3g did not work for me at all, apns could not be set,
after a bit of hassle i got optus working and am happy so far, vodafone is sooo bad in aus anyway.
Yea i used my sprint touch pro 2 all last year down under.
Hoping the photon puts my tp2 on the shelf.
I agree with hodie though
Optus is good when your in Melbourne, sydney, perth,etc.but i thought telstra had the better overall service.
Sent from my MB855 using xda premium
3G issue
Hi,
Im from Dominican Republic and I got a Photon, the phone use to works fine with my carrier, but since 2 weeks ago the 3G network is unavailable. My carrier is Claro Dominicana (GSM 850 MHz) and searching for the possible problem I think that one of the motorola update block that band since is the same one as ATT. I had rooted the phone and try with custom roms and also restore it to the stock rom but with no luck. Does anyone have face this issue? Is there a solution for this?
Thanks.
Hi folks
I just moved to the US (about a week ago) and was wondering why my mobile internet connection is so slow.
I have a SGS2 factory unlocked and i was fine with it in Germany (no problems with 2g or 3g speed)
Now I'm in the US with a t-mobile prepaid card which should give me 3g speeds , if not 3g at least EDGE Speed. But the only thing i get is the E-sign with 2 arrows which is friggin slow.
As far as i know t-mobile's 2g & 3g frequencies should be the same as in Europe.
So my question: Is my phone the problem or is it just that the 2g/3g coverage in San Diego is so bad ?
thx in advance
its normal...coz sgs2 does not support t-mobile 3g bands....but it does support at&t 3g bands....i am also using t-mobile prepaid plan...and dont use data that much...coz everywhere i go i have wifi....
Sent from my GT-I9100 using xda premium
ah ok thx for the reply
do you happen to know if an factory unlocked iphone (without sim lock bought directly from apple) will be able to use the US-3g bands as well as the European ones ?
as far as i know....it will be same as sgs2....only supports at&t 3g bands.....no t-mobile.....
Ok thx man.. Guess I gotta ask them directly then
Swyped from my SGS 2 using Tapatalk
deadcookie said:
Ok thx man.. Guess I gotta ask them directly then
Swyped from my SGS 2 using Tapatalk
Click to expand...
Click to collapse
Asking who directly? T-Mobile USA? You can ask, won't change the answer. If you want 3/4g in the US with either a European Galaxy S2 (GT-I9100) or an unlocked iPhone, you will need to be on AT&T.
T-Mobile doesn't use the frequencies that those two phones support.
deadcookie said:
Now I'm in the US with a t-mobile prepaid card which should give me 3g speeds , if not 3g at least EDGE Speed. But the only thing i get is the E-sign with 2 arrows which is friggin slow.
Click to expand...
Click to collapse
E-sign = EDGE.
So if i buy me i9100 s2 and i put at&t sim card, i live in texas USA will i get at least 3g signals?
deadcookie said:
Hi folks
I just moved to the US (about a week ago) and was wondering why my mobile internet connection is so slow.
I have a SGS2 factory unlocked and i was fine with it in Germany (no problems with 2g or 3g speed)
Now I'm in the US with a t-mobile prepaid card which should give me 3g speeds , if not 3g at least EDGE Speed. But the only thing i get is the E-sign with 2 arrows which is friggin slow.
As far as i know t-mobile's 2g & 3g frequencies should be the same as in Europe.
So my question: Is my phone the problem or is it just that the 2g/3g coverage in San Diego is so bad ?
thx in advance
Click to expand...
Click to collapse
USA uses different bands from the rest of the world because, well, idk
North America:
GSM: 850/900/1800/1900 MHz
CDMA: Band Class: 0/1/10
WCDMA: Bands: 1/2/4/5/6/8/19
LTE: Bands: 1/2/4/5/17/19/25/26/41
Rest of World:
GSM: 850/900/1800/1900 MHz
WCDMA: Bands: 1/2/4/5/6/8
LTE: Bands: 1/3/5/7/8/20
This might be the case here, i don't think its carriers fault but idk really.
Hi !
like u see in the title i have a mini pro sk17i and i have no 3G conexion bicause am from colombia and frequency are diferent i want to flash to sk17a to get latinamerica frequency and have 3G conexion in my country. I´m very bored with EDGE conexion.
can i do that? if i can how can i do it?
Thanks very much, sorry my english i speak spanish
t0m4s_g1l said:
Hi !
like u see in the title i have a mini pro sk17i and i have no 3G conexion bicause am from colombia and frequency are diferent i want to flash to sk17a to get latinamerica frequency and have 3G conexion in my country. I´m very bored with EDGE conexion.
can i do that? if i can how can i do it?
Thanks very much, sorry my english i speak spanish
Click to expand...
Click to collapse
It is actually no difrent bro, I'm from Nicaragua and i already tried that, but it is a hardwere problem, the sk17i means that the phone is international type, and sk17a is for america. so unfortunately u can't change that, we will never have 3G with i Series :crying::crying::crying:
Are u really sure? bicause i have a samsung galaxy ace gts5830m and i can change kernel, rom and modem to other version to change 3g frecuency. am asking if ur very sure bicause suddenly u dident flash all ! only rom or well i really dont know how is in sony ericsson phones. but in galaxy u can flash only one. To change only one thing.
Thanks for ur answer
t0m4s_g1l said:
Are u really sure? bicause i have a samsung galaxy ace gts5830i and i can change kernel, rom and modem to other version to change 3g frecuency. am asking if ur very sure bicause suddenly u dident flash all ! only rom or well i really dont know how is in sony ericsson phones. but in galaxy u can flash only one. To change only one thing.
Thanks for ur answer
Click to expand...
Click to collapse
I'm so sure, i spend days trying to find the way to get 3G but i had no luck!!! Is hardware problem, because the 3G that work in Europa does not work in America! I know... that sucks but thats how it is
And btw with sony u can flash as many times as u need!!!
Sent from my SK17i using xda premium
daydu19 said:
It is actually no difrent bro, I'm from Nicaragua and i already tried that, but it is a hardwere problem, the sk17i means that the phone is international type, and sk17a is for america. so unfortunately u can't change that, we will never have 3G with i Series :crying::crying::crying:
Click to expand...
Click to collapse
I think you don't know about telecommunication implementation. How come you can't get 3G with i-series ??? Have you red that phone specification ???. If u know about GSM and 3G implementation as ido (i work in these telecommunication field as an network engineer implementation). If you read that phone spec --> http://www.sonymobile.com/us/products/phones/xperia-mini-pro/specifications/ (see under Networks) you'll see :
GSM GPRS/EDGE 850, 900, 1800, 1900 so for 2G connection it cover all that frequncies that use in all over the world (except Japan, coz Japanese have different 2G and 3G network implementation) see this --> http://www.worldtimezone.com/gsm.html.
UMTS HSPA 900, 2100 (Global except Americas) so it means it cover all 3G frequencies that use outside America.
UMTS HSPA 800, 850, 1900, 2100 (Americas) so it means it cover all 3G frequencies that use inside America.
So why you're all saying that this phone didn't support you're country 3G, except you want to you use your phone in Japan, then it won't works as Japan use 3G with frequecies 1700/2100 MHz. The only possibility that i know is you're area was not coverage by 3G connection or even if that 3G had implemented in your country but it can't reach you're area so this what we called "Blank Spot" area. So please first get to know how the netrwork implemented in you're are, does it coverage by 3G or not.
For the code series, yeah you're right SK17i - it means for international release outside America and SK17a for inside America but it's not related to the frequencies coverage (notice these). SK17x or Xperia Mini Pro has globally working in all over the world that use 2G frequencies 850, 900, 1800, 1900 Mhz and 3G frequencies 800, 850, 900, 1900, 2100 MHz, except you're using it in Japan so it's useless.
googler78 said:
I think you don't know about telecommunication implementation. How come you can't get 3G with i-series ??? Have you red that phone specification ???. If u know about GSM and 3G implementation as ido (i work in these telecommunication field as an network engineer implementation). If you read that phone spec --> http://www.sonymobile.com/us/products/phones/xperia-mini-pro/specifications/ (see under Networks) you'll see :
GSM GPRS/EDGE 850, 900, 1800, 1900 so for 2G connection it cover all that frequncies that use in all over the world (except Japan, coz Japanese have different 2G and 3G network implementation) see this --> http://www.worldtimezone.com/gsm.html.
UMTS HSPA 900, 2100 (Global except Americas) so it means it cover all 3G frequencies that use outside America.
UMTS HSPA 800, 850, 1900, 2100 (Americas) so it means it cover all 3G frequencies that use inside America.
So why you're all saying that this phone didn't support you're country 3G, except you want to you use your phone in Japan, then it won't works as Japan use 3G with frequecies 1700/2100 MHz. The only possibility that i know is you're area was not coverage by 3G connection or even if that 3G had implemented in your country but it can't reach you're area so this what we called "Blank Spot" area. So please first get to know how the netrwork implemented in you're are, does it coverage by 3G or not.
For the code series, yeah you're right SK17i - it means for international release outside America and SK17a for inside America but it's not related to the frequencies coverage (notice these). SK17x or Xperia Mini Pro has globally working in all over the world that use 2G frequencies 850, 900, 1800, 1900 Mhz and 3G frequencies 800, 850, 900, 1900, 2100 MHz, except you're using it in Japan so it's useless.
Click to expand...
Click to collapse
Thaks for the info bro!!! But actually it does not metter how hard u try, u will never get 3G in America with sonys i models... thats just the way they have set it i had a difrent phone before and the 3G worked as good as hell but with this phone i can only use wifi cuz the data connection sucks
Sent from my SK17i using xda premium
daydu19 said:
Thaks for the info bro!!! But actually it does not metter how hard u try, u will never get 3G in America with sonys i models... thats just the way they have set it i had a difrent phone before and the 3G worked as good as hell but with this phone i can only use wifi cuz the data connection sucks
Sent from my SK17i using xda premium
Click to expand...
Click to collapse
Can u tell me what's your phone name and type that you say it that3G worked before you use this Xperia ???
I use Samsung Galaxy FIT and i can flash over and over again either thru flashtool (SAMSUNG flashtool named ODIN) or CWM, for a day now i've just reflash my Galaxy FIT with 12 ROM (7 Stock ROM and 5 Cutom ROM) with no problem with 3G Connection. In fact, Samsung has more simplicity in the software system. I've SK17i too, but since it's still have developer guaranted and i have this .62 firmware which must downgrade first to .58 then we can rooted so i'm leave it till my developer guarated expired then i'll install custom ROM too. Now plan to upgrade to ICS but Sony announced it'll decrease the performance, so i'll leave in GB for now.
Actually there's a software system which is involve for locking some frequencies for certain country, it calls MNC/MCC code --> http://en.wikipedia.org/wiki/Mobile_Network_Code. You must first unlock this code for using that Xperia Mini Pro in your country. Are your phone comes with bundling from specific Telecommunication Company like AT&T or Vodafone or else ??? If yes, then your phone MNC/MCC had benn locked. For example :
- If your buy a phone in Europe which is bundling by Vodafone, then u cannot use it in America since it locked for Europe frequencies even the phone has global coverage frequencies but it's locked by that company.
But, as far as i know it included in ROM, so if you change your ROM with full flash then all the system and frequencies will be unlocked, just easy like that. And even your phone comes with bundling with specific country, actually it can't not use at all if your use it another country even for the 2G too, so when you use it say "Unknown Network" or "Network Unavailable" in the display, except your flash it with full flash.
googler78 said:
Can u tell me what's your phone name and type that you say it that3G worked before you use this Xperia ???
I use Samsung Galaxy FIT and i can flash over and over again either thru flashtool (SAMSUNG flashtool named ODIN) or CWM, for a day now i've just reflash my Galaxy FIT with 12 ROM (7 Stock ROM and 5 Cutom ROM) with no problem with 3G Connection. In fact, Samsung has more simplicity in the software system. I've SK17i too, but since it's still have developer guaranted and i have this .62 firmware which must downgrade first to .58 then we can rooted so i'm leave it till my developer guarated expired then i'll install custom ROM too. Now plan to upgrade to ICS but Sony announced it'll decrease the performance, so i'll leave in GB for now.
Actually there's a software system which is involve for locking some frequencies for certain country, it calls MNC/MCC code --> http://en.wikipedia.org/wiki/Mobile_Network_Code. You must first unlock this code for using that Xperia Mini Pro in your country. Are your phone comes with bundling from specific Telecommunication Company like AT&T or Vodafone or else ??? If yes, then your phone MNC/MCC had benn locked. For example :
- If your buy a phone in Europe which is bundling by Vodafone, then u cannot use it in America since it locked for Europe frequencies even the phone has global coverage frequencies but it's locked by that company.
But, as far as i know it included in ROM, so if you change your ROM with full flash then all the system and frequencies will be unlocked, just easy like that. And even your phone comes with bundling with specific country, actually it can't not use at all if your use it another country even for the 2G too, so when you use it say "Unknown Network" or "Network Unavailable" in the display, except your flash it with full flash.
Click to expand...
Click to collapse
The phone I had was a LG Optimus Me (p350) but i also had a xperia play (R800a) and the 3G was good. My girlfriend has a xperia 10 mini pro (U20i) unlocked by the company and she has no 3G if there is a way to get 3G here with this phones, bro that will be awesome!!!!
Sent from my SK17i using xda premium
googler78 said:
I think you don't know about telecommunication implementation. How come you can't get 3G with i-series ??? Have you red that phone specification ???. If u know about GSM and 3G implementation as ido (i work in these telecommunication field as an network engineer implementation). If you read that phone spec --> http://www.sonymobile.com/us/products/phones/xperia-mini-pro/specifications/ (see under Networks) you'll see :
GSM GPRS/EDGE 850, 900, 1800, 1900 so for 2G connection it cover all that frequncies that use in all over the world (except Japan, coz Japanese have different 2G and 3G network implementation) see this --> http://www.worldtimezone.com/gsm.html.
UMTS HSPA 900, 2100 (Global except Americas) so it means it cover all 3G frequencies that use outside America.
UMTS HSPA 800, 850, 1900, 2100 (Americas) so it means it cover all 3G frequencies that use inside America.
So why you're all saying that this phone didn't support you're country 3G, except you want to you use your phone in Japan, then it won't works as Japan use 3G with frequecies 1700/2100 MHz. The only possibility that i know is you're area was not coverage by 3G connection or even if that 3G had implemented in your country but it can't reach you're area so this what we called "Blank Spot" area. So please first get to know how the netrwork implemented in you're are, does it coverage by 3G or not.
For the code series, yeah you're right SK17i - it means for international release outside America and SK17a for inside America but it's not related to the frequencies coverage (notice these). SK17x or Xperia Mini Pro has globally working in all over the world that use 2G frequencies 850, 900, 1800, 1900 Mhz and 3G frequencies 800, 850, 900, 1900, 2100 MHz, except you're using it in Japan so it's useless.
Click to expand...
Click to collapse
You are mixing frequencies from sk17i and sk17a. In the same link you provide from Sony with the specs of MiniPro, there is a link to the white paper (pdf) and you can check that sk17i works with UMTS HSPA 900 (Band VIII), 2100 (Band I), and sk17a with UMTS HSPA 850 (Band V), 1900 (Band II), 2100 (Band I).
So, unless in America the provider was using 2100 band, the user wont get 3G connection with sk17i.
White Paper --> http://www-support-downloads.sonymobile.com/sk17/whitepaper_EN_sk17_xperia_mini_pro.pdf
jomofer said:
You are mixing frequencies from sk17i and sk17a. In the same link you provide from Sony with the specs of MiniPro, there is a link to the white paper (pdf) and you can check that sk17i works with UMTS HSPA 900 (Band VIII), 2100 (Band I), and sk17a with UMTS HSPA 850 (Band V), 1900 (Band II), 2100 (Band I).
So, unless in America the provider was using 2100 band, the user wont get 3G connection with sk17i.
White Paper --> http://www-support-downloads.sonymobile.com/sk17/whitepaper_EN_sk17_xperia_mini_pro.pdf
Click to expand...
Click to collapse
Refer to the white paper, so there's a different between SK17i and SK17. So thanks for correction.
Refer to this link --> http://www.worldtimezone.com/gsm.html <-- , I'm still had curiousity about the hardware, i've used to works as a phone technician in Nokia and Sony Ericsson for about 12 years ago, and you know in that time, different country has different GSM implementation (3G has not been implemented in that time, only GPRS). And sometimes i got outside job to flash another phone of my customer that they bought outside my country says like from Europe, Middle East or China and most of that phone was locked with their country origin Provider, and definitely can't use in my country, so i just flash that phone and sometimes i just only remove the MNC lock code so it can be use in my country. So i'm still curious why if we flash SK17i with SK17a ROM, and still it can't be used to connect to the 3G 1900.
it should actually be sufficent to flash your SK17i with the SK17a version using flashtool. as they are using the same modem chipset with just different frequency table.
slade87 said:
it should actually be sufficent to flash your SK17i with the SK17a version using flashtool. as they are using the same modem chipset with just different frequency table.
Click to expand...
Click to collapse
Yes, i agree with you. Coz in 2000 - 2002 when i used to work as Phone Technician, i saw that the phone only have one component crystal for generating base frequencies, and yeah when we unlock a bundling phone or locked phone we just had to add some files that contains all the GSM frequency table, and then that phone can use in all over country in the world except for country that don't use global GSM frequencies like Japan.
But as inform by mr.daydu19 that he has just do that, and still he can't connect his SK17i which use SK17a ROM to the 3G 1900 America.
Can you provide a link to SK17x schematic diagram as i want to learn the hardware configuration.
Is it possible that maybe there's a hidden code/algorithm in the ROM SK17a so if u inject it to the SK17i then the ROM SK17a recognize that destination phone is SK17i, then it block again the 3G 1900 frequencies table files so we can't use that frequencies ?
Usually you will need to flash the entire FTF of a SK17a version which also includes the baseband, besides that the old x10's had a switch within the build.prop to decide which model it is and changed the frequencies if i remember correctly!
SK17a and SK17i UMTS Block
Now i attached schematic diagram from SK17i and SK17a.
You'll see that SK17a and SK17i has the same UMTS block named UMTS1 Band 1, UMTS Band 2 and UMTS Band 5, it's just on the SK17i at the UMTS Band 5 block it's using different chip with the SK17a. Here the list of the Chip on the UMTS Blok:
A. SK17i :
1) UMTS Band 5 block use chip SKY77705 which is an IC's for Band VIII --> http://www.skyworksinc.com/uploads/documents/201224a.pdf
2) UMTS Band 2 block use chip SKY77702 which is an IC's for Band II --> http://www.skyworksinc.com/uploads/documents/201217b.pdf
3) UMTS Band 1 block use chip SKY77701 which is an IC's for Band I --> http://www.skyworksinc.com/uploads/documents/201216a.pdf
B. SK17a :
1) UMTS Band 5 block use chip SKY77704 which is an IC's for Band V --> http://www.skyworksinc.com/uploads/documents/201222a.pdf
2) UMTS Band 2 block use chip SKY77702 which is an IC's for Band II --> http://www.skyworksinc.com/uploads/documents/201217b.pdf
3) UMTS Band 1 block use chip SKY77701 which is an IC's for Band I --> http://www.skyworksinc.com/uploads/documents/201216a.pdf
So SK17a and SK17i almost have same HARDWARE, the differential only at SK17a it works in three BAND 3G which is 850, 1900 and 2100, and SK17i works in 900, 1900, 2100. Good news is SK17i also has UMTS Band II block, means it can connect to 3G America with Band II which is 1900 MHz.
So if you full flash FTF SK17a to SK17i phone, it means your phone SK17i now can connect to 3G America 850 and 1900, but since the hardware only has 900, 1900 and 2100, so you can't connect to 850 coz it hardware was 900. But still you have 3G America 1900, and if you still can't get connection to 3G 1900 America in your country so i can be sure that your area was not cover by 3G Band II which is 1900 but your area was cover by 3G Band V which is 850 MHz, but since SK17i Band V block works as Band VIII, so it can't connect too. So, like i said before, please make sure what 3G Band that cover in your area and please post in here.
daydu19 said:
The phone I had was a LG Optimus Me (p350) but i also had a xperia play (R800a) and the 3G was good. My girlfriend has a xperia 10 mini pro (U20i) unlocked by the company and she has no 3G if there is a way to get 3G here with this phones, bro that will be awesome!!!!
Sent from my SK17i using xda premium
Click to expand...
Click to collapse
As in my previous post, so there's bad news, since you live in Nicaragua that only has 3G Band V 850 MHz, so it useless for you to fullflash FTF from i-series, since i-series only has 3G Band I - 900, II - 1900 and VIII - 2100 MHz in it's motherboard/module. So now u had to be notice for choosing phone that comes outside your country, even if you want to flashfull that phone.
Same as your girlfriend phone, it has hardware configuration like SK17i, even more bad news to this phone. Coz the schematic comes with only one for all (i mean it's not separate between U20i and U20a), so i can't be so sure if the 3G Band II - 1900 chip was exist for U20i too or it just 3G Band for U20a coz it's same schematic not separated. Even worse news is it comes with two hardware, one is with 3G Band II - 1900 and another with 3G Band IV - 1700. If your girlfriend phone maybe comes with 3G Band IV - 1700, so it's no other way you can get 3G in your country with this phone, but if it comes with 3G Band II - 1900 like SK17i, then u just have to wait till your country provide 3G Band II - 1900 and then u can flashfull FTF your phones.
Hope this helpful, and please take some research for your country 3G Band, what 3G Band has implemented ? and posting it here. Coz as far as i know Nicaragua only implemented 3G Band V - 850. But since you live there, maybe you can get update data.
googler78 said:
As in my previous post, so there's bad news, since you live in Nicaragua that only has 3G Band V 850 MHz, so it useless for you to fullflash FTF from i-series, since i-series only has 3G Band I - 900, II - 1900 and VIII - 2100 MHz in it's motherboard/module. So now u had to be notice for choosing phone that comes outside your country, even if you want to flashfull that phone.
Same as your girlfriend phone, it has hardware configuration like SK17i, even more bad news to this phone. Coz the schematic comes with only one for all (i mean it's not separate between U20i and U20a), so i can't be so sure if the 3G Band II - 1900 chip was exist for U20i too or it just 3G Band for U20a coz it's same schematic not separated. Even worse news is it comes with two hardware, one is with 3G Band II - 1900 and another with 3G Band IV - 1700. If your girlfriend phone maybe comes with 3G Band IV - 1700, so it's no other way you can get 3G in your country with this phone, but if it comes with 3G Band II - 1900 like SK17i, then u just have to wait till your country provide 3G Band II - 1900 and then u can flashfull FTF your phones.
Hope this helpful, and please take some research for your country 3G Band, what 3G Band has implemented ? and posting it here. Coz as far as i know Nicaragua only implemented 3G Band V - 850. But since you live there, maybe you can get update data.
Click to expand...
Click to collapse
I did a little research, and the company my phones is working with has a GSM 1900 with extended coverage, UTMS 850 MHz just for the city I'm at!!! so i guess that i can't use 3G :crying: is that so?
googler78 said:
Refer to the white paper, so there's a different between SK17i and SK17. So thanks for correction.
Refer to this link --> http://www.worldtimezone.com/gsm.html <-- , I'm still had curiousity about the hardware, i've used to works as a phone technician in Nokia and Sony Ericsson for about 12 years ago, and you know in that time, different country has different GSM implementation (3G has not been implemented in that time, only GPRS). And sometimes i got outside job to flash another phone of my customer that they bought outside my country says like from Europe, Middle East or China and most of that phone was locked with their country origin Provider, and definitely can't use in my country, so i just flash that phone and sometimes i just only remove the MNC lock code so it can be use in my country. So i'm still curious why if we flash SK17i with SK17a ROM, and still it can't be used to connect to the 3G 1900.
Click to expand...
Click to collapse
Hi. I have read all what u wrote guys (again sorry my english i can understand good but when i write am not so good) for a moment i thought that what u sed of unlocking frecuencys in sk17i was posible but i realise that yes there are diferent frecuencys in both phones.
am gona respond ur question and if am wrong someone to correct me.
U can flash sk17a rom in sk17i phone i heard a lot of people that do it. the only thing they do is save VPN configuration to conect to 3G network. but these phones came with frecuencys in hardware not in software modem driver mode like my samsung galaxy gt-s5830m that i can change mi modem with ODIN like u sed and rom to transform it in gt-s5830i (Indian model) so if a go to india y can use the 3g network no problem with that. So i think thats the problem with this sony ericsson models that frecuencys are in hardware. i read in taringa some user that said that with flashtool we can modify those frecuencys in the hardware to ad america´s. I send a private messege but he has not respond me. Well in htcmania spanish forum i olso asked but had the same respond that it was not posible and i will be always with EDGE conexion. but if someone have some news we will really appreciate that!!
In Colombia were i live i have
COMCEL NOW CLARO MOVIL
GSM: 850MHz
UMTS/HSDPA: 850Mhz
MOVISTAR
GSM: 850MHz
UMTS/HSDPA: 850Mhz
TIGO
GSM: 1900MHz
UMTS/HSDPA: 1900MHz
Am claro movil so if i use tigo i can have 3G conection with 1900 frecuency in sk17i
t0m4s_g1l said:
Hi. I have read all what u wrote guys (again sorry my english i can understand good but when i write am not so good) for a moment i thought that what u sed of unlocking frecuencys in sk17i was posible but i realise that yes there are diferent frecuencys in both phones.
am gona respond ur question and if am wrong someone to correct me.
U can flash sk17a rom in sk17i phone i heard a lot of people that do it. the only thing they do is save VPN configuration to conect to 3G network. but these phones came with frecuencys in hardware not in software modem driver mode like my samsung galaxy gt-s5830m that i can change mi modem with ODIN like u sed and rom to transform it in gt-s5830i (Indian model) so if a go to india y can use the 3g network no problem with that. So i think thats the problem with this sony ericsson models that frecuencys are in hardware. i read in taringa some user that said that with flashtool we can modify those frecuencys in the hardware to ad america´s. I send a private messege but he has not respond me. Well in htcmania spanish forum i olso asked but had the same respond that it was not posible and i will be always with EDGE conexion. but if someone have some news we will really appreciate that!!
Click to expand...
Click to collapse
sorry this i did not read the second page when i wrote this.
daydu19 said:
I did a little research, and the company my phones is working with has a GSM 1900 with extended coverage, UTMS 850 MHz just for the city I'm at!!! so i guess that i can't use 3G :crying: is that so?
Click to expand...
Click to collapse
Unfortunately you can't use 3G Band V - 850 at this SK17i coz it's hardware only has 3G Band VIII - 900. This is details :
SK17a ROM has 3G frequency table :
1. 3G Band V - 850 ---> flash to SK17i that has chip for 3G Band VIII - 900 ---> so this 850 frequency table not work as hardware at 900. So you forget about this 3G Band V -850, it's useless for you if you wanna use this frequency to your SK17i.
2. 3G Band II - 1900 ---> flash to SK17i that has chip for 3G Band II (according to schematic diagram, it can be exist or not) ---> so this frequency table and hardware are matching so it'll work.
3. 3G Band I - 2100 ---> this of course match to SK17i, but since your living in America that's not implemented this frequency so forget about this frequncy too. But according to this link ---> http://www.worldtimezone.com/gsm.html some country in America has implemented this frequency too. So just take some research for what 3G Band your area covered.
Now, all we can rely is to the 3G Band II - 1900. I've just email some of my friends that still working as a technician in Sony to make sure that the 3G Band II - 1900 chips is exist in the SK17i motherboard/mainboard but still got no respons. But from my experience as a technician for about 16 years and since my school basic was in Tehcnical, if some component was not exist in BOARD but exist in SCHEMATIC so that component must be marking .or surrounding with "dash-line". And as you seen that our SK17i 3G Band II - 1900 chips was not marking or surrouding with "dash-line" so it's must be exist.
---------- Post added at 09:42 PM ---------- Previous post was at 09:38 PM ----------
t0m4s_g1l said:
In Colombia were i live i have
COMCEL NOW CLARO MOVIL
GSM: 850MHz
UMTS/HSDPA: 850Mhz
MOVISTAR
GSM: 850MHz
UMTS/HSDPA: 850Mhz
TIGO
GSM: 1900MHz
UMTS/HSDPA: 1900MHz
Am claro movil so if i use tigo i can have 3G conection with 1900 frecuency in sk17i
Click to expand...
Click to collapse
As my theory yes. Maybe you can try it and give result in this page. And make sure TIGO really works in 3G 1900 not two band, coz sometimes telecommunication provider expand their network by add another 3G Band but they not announced that as they don't have to. So this is what you've got to do:
As i used too works as customer service/front-desk from a providerGSM/3G card, you've come to one of TIGO customer representative office and asking if their GSM/3G card are works in 1900 only or two bands which is 850/1900 ??? If only 1900 then you don't have to changes/request to a new card. But if they card works in two band, then you have to request new card only works for 1900, as you wanna prove my theory if it's right or wrong. Coz if you put card that has two bands which is 850 and 1900, maybe your ROM can detect the 850 and it algorithm push only the 850 frequency table to works too, so the 1900 will not works. So just to make sure, please do as i say above.