This is all my phone keeps doing... I have no idea how to fix this...
Anyone?
that means your boot looping...odin back to stock and start over.
That's a boot loop!
some info will help us help you..
i'm assuming your phone didn't just do this out of the blue? Did you just try to flash a new nightly or a different kernel?
Edit damn you Droidstyle!! your always 2 mins before me!!! And I thought I had a slight forum addiction problem..
Sent from my SCH-I500 using XDA App
I just did go back to stock and try it again...
Same damn problem...
This all started when I tried to go to a low(er) leakage Glitch kernel and I have had NO luck getting my phone back to normal...
Now, I'm boot looping...
FordDenny said:
I just did go back to stock and try it again...
Same damn problem...
This all started when I tried to go to a low(er) leakage Glitch kernel and I have had NO luck getting my phone back to normal...
Now, I'm boot looping...
Click to expand...
Click to collapse
Try going back to a older stock package such as dl09 and repartition. I have read where a few had trouble with stock ed05 to cm7. I know I did when flashing vgb...
droidstyle said:
Try going back to a older stock package such as dl09 and repartition. I have read where a few had trouble with stock ed05 to cm7. I know I did when flashing vgb...
Click to expand...
Click to collapse
And tell me what repartition means?
FordDenny said:
And tell me what repartition means?
Click to expand...
Click to collapse
It means when you odin a stock rom.tar file in pda, you should have an atlas 2.2 pit file in the pit function with repartition checked.
FordDenny said:
And tell me what repartition means?
Click to expand...
Click to collapse
MTD roms repartition the phone to, well, the MTD partition map. in order to go back to stock, you must repartition your phone back to BML partition map, which Samsung uses. if you don't you're more than likely going to run into problems
Sent from my Incredible 2 using XDA App
times_infinity said:
MTD roms repartition the phone to, well, the MTD partition map. in order to go back to stock, you must repartition your phone back to BML partition map, which Samsung uses. if you don't you're more than likely going to run into problems
Sent from my Incredible 2 using XDA App
Click to expand...
Click to collapse
I did all this just now.. DL09 and atlas and now I get..
MANUAL MODE
E: Can't mount /dev/block/mmcblk0p1
WTF now????
FordDenny said:
This is all my phone keeps doing... I have no idea how to fix this...
Anyone?
Click to expand...
Click to collapse
This happened to me going from the first release of espresso to the second. I Odined DI01 and repartioned and used atlas.pit file and all went well when I reflashed espresso build 18 (after odining recovery for cm7 and ec09 radio of course).
Sent from my SCH-I500 using XDA App
Bubbadogg14 said:
This happened to me going from the first release of espresso to the second. I Odined DI01 and repartioned and used atlas.pit file and all went well when I reflashed espresso build 18 (after odining recovery for cm7 and ec09 radio of course).
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
So you Odined DI01, repartitioned (Atlas), then odined recovery for cm7 and then odined ec09 radio???
are you letting the phone boot up once after odining the stock package w/ pit? If not that is more than likely your problem,
-odin d101 or whatever stock package w/ atlas pit file
-let phone boot up once then power off...get back to DL mode
-odin ec09 modem
-odin recovery for cm7
-boot into recovery
-then proceed as you normally would with installing cm7
Try heimdall
Sent from my SCH-I500 using XDA App
Related
I tried to Odin to stock T-Mo but I cant get passed the Galaxy S boot screen. It just goes black and if I touch the buttons they light up but phone stays black. I tried a number of times also clicked on repartition in Odin. Odin tells me everything passed but when the phones boots ROM Manager screen comes up goes through a check list with one line in red that reads "Data wipe Failed"
Can someone please help me out. Ran Odin many times but I cant get the phone to go back to full stock. I click repartition but it seems Odin does not wipe the internal SD. I am so vexed. Someone help
I have never partitioned. Or whatever. That can cause a soft brick.
Sent from my SGH-T959 using XDA App
I have before in it went well. The phone (my wifes) was bricked to begin with. It would not go past the white vibrant screen. So I Odined back to stock. It goes through the T Mo stick together screen then gets to the Galaxy S animation. But after the galaxy s logo he screen turns black and only if I touch the buttons to the buttons light up. I tried to reflash via Odin a number of times but I cant get the phone to fully boot.
What ROM you had before going back to stock?
Any lagfix? If yes disable it..
Sent from my SGH-T959 using XDA App
You should do it again. No repartition. Wipe data. Dont touch it. Odin will boot up the phone when its fully done.
Sent from my SGH-T959 using XDA App
Ive done this several times. Works everytime
Sent from my SGH-T959 using XDA App
Try eugenes froyo that doesn't brick then reset odin and then go to stock firmware I mean it couldn't really hurt anything
willsnews said:
Try eugenes froyo that doesn't brick then reset odin and then go to stock firmware I mean it couldn't really hurt anything
Click to expand...
Click to collapse
Okay it also accured to me to try Eugenes. So I did and it worked. But I can not install any programs. It tells me there is not enough space. Then when I look at settings/storage on the bottom it reads 0 space for apps.
Strange no? Any ideas
Thanks to everyone so far. I really appreciate it!
As I understand it as soon as you odin eugenes froyo you have to reset odin get the phone into dl mode again then use odin to put in the stock firmware
samyvibrantuser said:
What ROM you had before going back to stock?
Any lagfix? If yes disable it..
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
he female voice came on, everything went well but when the phone went to reboot it got hung up on the white vibrant screen. So I tried to Odin to JDF stock. Then it would get passed the galaxy S animation and go black screen.
Eugenes froyo works but my app storage is at 0.
arrggg!
willsnews said:
As I understand it as soon as you odin eugenes froyo you have to reset odin get the phone into dl mode again then use odin to put in the stock firmware
Click to expand...
Click to collapse
Damn. I tried but it doesnt want to flash back to stock. When I flash stock the I get the same results. Phone goes black after the galaxy s animation
Anyone? Any ideas? I have been at this for four hours
samyvibrantuser said:
What ROM you had before going back to stock?
Any lagfix? If yes disable it..
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
I was unable to disable voodoo because it would not boot the first time. (and just to be clear. I was on stock eclair and used JOC kernel/uv/voodoo
stock eclair and used JOC kernel/uv/voodoo
Thats good stuff I rocked it for a while
willsnews said:
stock eclair and used JOC kernel/uv/voodoo
Thats good stuff I rocked it for a while
Click to expand...
Click to collapse
Yeah. Tried it on this phone which is my wifes and it bricked for some reason.
You gotta find a way to disable voodoo. Theres a way to disable it by putting something directly into the Voodoo folder but I cant find it =/
Charlie Brown said:
Yeah. Tried it on this phone which is my wifes and it bricked for some reason.
Click to expand...
Click to collapse
Jacs kernel always gave me bricks for some reason. Do what they said again. Flash to eugenes froyo that doesnt brick with repartition checked. Then RIGHT AWAY make sure you have the jfd rom for odin and flash that using odin with repartition unchecked. Dont try to flash a clockwork recovery rom from eugenes froyo that doesnt brick because you arent done fixing it at that point.
Sent from my SGH-T959 using XDA App
once this is fixed if you want voodoo, upgrade to a 2.2 rom and use supercurios own modified kernels. Never had a problem with them.
Sent from my SGH-T959 using XDA App
Settai said:
You gotta find a way to disable voodoo. Theres a way to disable it by putting something directly into the Voodoo folder but I cant find it =/
Click to expand...
Click to collapse
I cant get to the voodoo folder. I tried every firmware there is and only Eugenes froyo will fully boot. But I cant install any apps so I can get to me system folders so i can see whats going on.
Im so stressed and tired it aint funny.
When I flash a T Mo rom and the phone reboots and goes through a series of line checks (yellow text) I get red text that reads "data wipe failed". Then the phone boots, t mo jingle, then galaxy s screen, then black.
Anyone??? Devs? PLease?
Do you have root explorer?
I have tried everything i was able to find but i cannot get MIUI or CM7 Flashed onto my phoen and i am now stuck on a bootloop after CM7 where clockworkmod is :waiting for sd card to mount" with a 20 sec count down. I want to flash MIUI but when i try i get this
checking state of BML/MTD...
Assert failed: run_program("/tmp/updater.sh") == 0
Ive odined the pit and all a ton of times and am using JT's CWM fix
Please Help!
mcramer19 said:
I have tried everything i was able to find but i cannot get MIUI or CM7 Flashed onto my phoen and i am now stuck on a bootloop after CM7 where clockworkmod is :waiting for sd card to mount" with a 20 sec count down. I want to flash MIUI but when i try i get this
checking state of BML/MTD...
Assert failed: run_program("/tmp/updater.sh") == 0
Ive odined the pit and all a ton of times and am using JT's CWM fix
Please Help!
Click to expand...
Click to collapse
I would re download the zip file...using jt's recovery you shouldn't have a problem...you could just have a bad download...it's happens to me more then once...not on this rom but a bad download is not that uncommon that is why some people put hash check sums on there files so you can make sure of a good download prior to flashing
re download and try again with the same recovery...if that doesn't help I made it to cm7 twice with the purple times infinity cwm..both times without a hitch
I'm not sure if this info will help I'm just relaying what worked for me.
Sent from my SCH-I500 using XDA App
efan450 said:
I would re download the zip file...using jt's recovery you shouldn't have a problem...you could just have a bad download...it's happens to me more then once...not on this rom but a bad download is not that uncommon that is why some people put hash check sums on there files so you can make sure of a good download prior to flashing
re download and try again with the same recovery...if that doesn't help I made it to cm7 twice with the purple times infinity cwm..both times without a hitch
I'm not sure if this info will help I'm just relaying what worked for me.
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
Ive tried redownloading and even using differnet sd cards. i finally got cm7 v5 on my phone but then i still got the bml error when i try to flash miui.
mcramer19 said:
Ive tried redownloading and even using differnet sd cards. i finally got cm7 v5 on my phone but then i still got the bml error when i try to flash miui.
Click to expand...
Click to collapse
Ugh man that's a tough one...hopefully someone who knows more than me will jump in and help ya
Edit when you tried the pit file to repartition which file did you use along with the pit? Dl09 or eb01?
Sent from my SCH-I500 using XDA App
efan450 said:
Ugh man that's a tough one...hopefully someone who knows more than me will jump in and help ya
Edit when you tried the pit file to repartition which file did you use along with the pit? Dl09 or eb01?
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
i used the eb01 package. after i got cm7 v5 on when i try and flash miui i get a cant open /cache error when i try and wipe.
Did you go to eb01 then straight to cm7? If so which cwm did you use and if you didn't go straight there what rom did you flash in between?..maybe you should try atlas 2.2 with eb01 and boot fully, then odin cwm and flash com rom 2.0 then reboot fully, then reboot cwm wipe everything then try to go to cm7 or miui that's what worked for me to get to cm7 build 7, afterwords I just wiped cache and dalvik and flashed build 8...no issues for me.
Sent from my SCH-I500 using XDA App
efan450 said:
Did you go to eb01 then straight to cm7? If so which cwm did you use and if you didn't go straight there what rom did you flash in between?..maybe you should try atlas 2.2 with eb01, odin cwm and flash com rom 2.0 then reboot fully, then reboot cwm wipe everything then try to go to that's what worked for me
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
I will try that now. i used Jts patched cwm for cm7
Edit: I still get eh same BML/MTD_Assert error
this is driving em crazy
Ok so I was in the process of trying to install CM7 from Superclean 2.9.2 and tried installing CM7 through CWM (red). Didn't work...so I tried installing the fixes for the recoveries in case it didn't work via Odin...
My phone stayed in the boot animation screen the whole way rebooting into the same animation...
So i flashed dl01 all in one to get it to stock...tried reading up and saw that I was supposed to re-partition with atlas v2.2.pit through odin in conjunction with a full stock app...
everytime I flash something with atlas 2.2 ...it always ends up booting into blue recovery with no way to boot into phone. I've tried the Stock DL09 and I've tried it with the dl01 all in one package...no cigar...
At one point I thought it worked and I saw the boot animation with the cyanogenmod logo...but it errored and kept booting into error in which I could only catch a glimpse of the words...some include "mount"
How can I fix this and be able to install Cyanogenmod 7? Please include step by step...I am aware that it is noob to ask such things, but I've tried searching and came up with solutions that didn't work for me.
Thank You
Did you have "re-partition" checked in Odin when using Atlas? Also, double check the MD5 on the .pit in case the download was corrupted.
Sent from my SCH-I500 using XDA Premium App
Reflash that .pit file with a froyo odin file. EB01 or ED01 will work. Then boot up fully. Then flash the dl09 odin file by itself, no .pit then boot OTA and profit.........
Just a heads up. Dont flash a froyo .pit file with an eclair .tar file. Youll boot into recovery evertime.
Just do what I said and youll be good.
check the repartition box and odin the atlas file first(wait for "pass"message)
reset odin
put phone in download mode again
odin dlo9 or eb01 package (no repartition)
Quick caveat on going OTA from DL09: VZW's updates now skip ED01 entirely and go direct to ED04. Keep this in mind if you prefer ED01
Sent from my SCH-I500 using XDA Premium App
laureanop said:
check the repartition box and odin the atlas file first(wait for "pass"message)
reset odin
put phone in download mode again
odin dlo9 or eb01 package (no repartition)
Click to expand...
Click to collapse
This might work too. but I havnt tried it. I did same thing as you and was told by adryn how to get phone booted back up. This was awhile ago tho..... Good luck.
Sent from my SCH-I500 using XDA App
Jazz848 said:
Quick caveat on going OTA from DL09: VZW's updates now skip ED01 entirely and go direct to ED04. Keep this in mind if you prefer ED01
Sent from my SCH-I500 using XDA Premium App
Click to expand...
Click to collapse
That is true. But you prob want ec09 radio anyway. Best ive used...
Sent from my SCH-I500 using XDA App
no ec09 radio for me anymore. I was running cm7 and decided to install ec09. Stuff started disappearing from my sd card (I mean like entire huge folders). I'm sticking with the EDs
Just re-read OP and noticed you asked for step-by-step. There are a few guides out there, but this one by kidserious is the most up-to-date one I've found and it has yet to give me a single issue: Hope this helps!
EDIT: When using the aforementioned guide, I have always used the DL09 .tar and cannot speak for the EB01 .tar. YMMV
I have been messing with my phone alot lately and have had a bunch of issues(not booting, boot loop, different colore recoveries). So I put together a little folder for myself that gets me back to ED01 TW Debloated and OTB 1.6 kernel. If you would like me to post it or send you the folder with everything you need I can. at work now so it wouldnt be till later tonight
So I've tried starting off with kidserious's way of returning to stock...and it seemed to have worked for me because I was able to see the logo with no problem booting into recovery (red).
But when I tried installing CM7 Test Build 10 via CWM, and it didn't work...it went into repeat boot (blue) and before it started doing that after I saw "Installation aborted"
I'm actually now at a stump of how to install CM7 now...
If your using the DI01 file in ODIN you dont need to have the .pit file. Its a full stock ODIN it already has it. If you flash that to eclair your fine.
Fasinationinmotion said:
If your using the DI01 file in ODIN you dont need to have the .pit file. Its a full stock ODIN it already has it. If you flash that to eclair your fine.
Click to expand...
Click to collapse
I apologize, but I'm confused by this. It's my understanding that the .pit is necessary if you're coming from a Voodoo setup. Are you saying that the DL01 .tar reverts the file system to stock on its own? Not challenging you, per se, just making sure I understand properly.
Sent from my SCH-I500 using XDA Premium App
Jazz848 said:
I apologize, but I'm confused by this. It's my understanding that the .pit is necessary if you're coming from a Voodoo setup. Are you saying that the DL01 .tar reverts the file system to stock on its own? Not challenging you, per se, just making sure I understand properly.
Sent from my SCH-I500 using XDA Premium App
Click to expand...
Click to collapse
You've got it right, thats the whole reason for using the atlas and repartition checked, it's to format everything back to rfs(non voodoo) from ext4.( voodoo) or in this case mtd
This it's especially important when coming from an mtd build..ie. Cm7 and going back to an old rfs or ext4 rom. I'm no dev, just a flash a holic but I think of it like this, voodoo is just a lag fix modification of our original rfs(non voodoo) format, while mtd is a completely different format so we no longer have the luxury of a recovery that supports this ability to enable and disable our lag fix (voodoo)...which your new mtd format doesn't support. I don't even think it is possible to make a recovery that will repartition your system in preparation to flash any rom format you want
Again I am no dev and this is how I think of it to make sure I take the appropriate steps...it's just my way of remembering what to do when flashing
This is why every time you want to go back from an mtd build you must repartition with the atlas 2.2 to re format your previous mtd format back to the original rfs
Everyone I've helped with issues going from mtd to rfs/ext4 or vice versa I always suggest
rfs (non voodoo)--->mtd
Odin the 3-30 fix all recovery...immediately boot to cwr
wipe everything and flash newest cm7...(I used the 7/4 build but I see it's no longer available but the newest one works too) and reboot
power button menu to recovery...flash gapps/mtd kernels/misc.zip files you may also have with out wiping and reboot.
odin desired radio...reboot.. done.
Mtd---> rfs/ext4
Odin vzw eb01 with atlas 2.2pit and repartition checked
Fully reboot...then pull batt.
Odin desired recovery..(I still use 3-30 fix all cwr).....immediately three finger boot to cwr wipe everything and flash new rom/kernel (voodoo our non voodoo)...reboot
Hasnt done me wrong yet...no fc...no boot loops just flash a holic goodness!
Sent from my SCH-I500 using XDA App
go to this thread, read about the files you need, flash back to stock. here
Then root, install CWR, follow part of odin heimdall guide on how to keep root on ed builds, then get jt's Cyanogen MTD, supposed to have install issues fixed. here
Hope this gets you what you are looking for.
leonvx671 said:
At one point I thought it worked and I saw the boot animation with the cyanogenmod logo...but it errored and kept booting into error in which I could only catch a glimpse of the words...some include "mount"
Click to expand...
Click to collapse
That happened to me. The download was corrupted. I odined EB01 then odined jt's new recovery, redownloaded cm7, and reflashed.
Sent from my SCH-I500 using XDA App
GrainOsand said:
Reflash that .pit file with a froyo odin file. EB01 or ED01 will work. Then boot up fully. Then flash the dl09 odin file by itself, no .pit then boot OTA and profit.........
Just a heads up. Dont flash a froyo .pit file with an eclair .tar file. Youll boot into recovery evertime.
Just do what I said and youll be good.
Click to expand...
Click to collapse
Please help! I have tried this numerous times, and my phone just keeps booting into stock recovery. It won't let me get past it.
I originally tried the .pit file with dl09 (mistake - I know), and it started the recovery mess. Then I downloaded the "stock" rooted eb01 file (EB01_DXC.tar.md5), and flashed it with the .pit file (atlas v2.2) and re-partition checked.
I have no other clue what's going on. I was just trying to wipe completely fresh to be able to load the CM7 Espresso on my phone. I've been running old CM7's for a while with the glitch kernels.
Help, please - I've been without a phone for the past 2 days. A huge thanks to anyone that can help me out!
I only use the DL01 or the ED05 stock packages. I think you should try those. I restored my phone when I was running SuperClean w/Voodoo with the DL01 package, no pit file.
Here is a link to ED05
OhioYJ said:
I only use the DL01 or the ED05 stock packages. I think you should try those. I restored my phone when I was running SuperClean w/Voodoo with the DL01 package, no pit file.
Here is a link to ED05
Click to expand...
Click to collapse
I'm scared that I've already messed something up by using the pit file, because I actually had the full dl01 file, and nothing. Not really sure what would be different about the ed05 file. I mean, I'm gonna try it, but does any one else have a suggestion? Thanks.
brettdacosta said:
Please help! I have tried this numerous times, and my phone just keeps booting into stock recovery. It won't let me get past it.
I originally tried the .pit file with dl09 (mistake - I know), and it started the recovery mess. Then I downloaded the "stock" rooted eb01 file (EB01_DXC.tar.md5), and flashed it with the .pit file (atlas v2.2) and re-partition checked.
I have no other clue what's going on. I was just trying to wipe completely fresh to be able to load the CM7 Espresso on my phone. I've been running old CM7's for a while with the glitch kernels.
Help, please - I've been without a phone for the past 2 days. A huge thanks to anyone that can help me out!
Click to expand...
Click to collapse
a pit file is a pit file, they are no different for eclair or froyo from my understanding. I have no problems odin dl09 w/ pit...I actually got that tip from the stickies on the galaxy s forums.
http://www.galaxyforums.net/forum/fascinate-rs-guides/2911-how-upgrade-cyanogenmod7.html
as you can see by reading the link alot, there are alot of different guides out there with different methods and I have tried them all... Thats why I created my own guide with pieces from all the other guides that I felt worked the best. My best advice to you is spend alot of time doing research and form your own opinion on what works best. DO NOT take one posters advice as it being the correct way because there is alot of misinformation on teh internet!!
Ok so I ran Jt's vanilla gingerbread for about week and a half and even tho I loved what I saw the rom was to unstable for me. No fried sd card issues but recovery problems and bootlooping issues. So I odined back to stock ed05(full odin) and after flashing CWR v4 decided to go with powerwash debloated ed05. After and foreclosure issue I did a complete wipe and factory reset and flashed a recovery for the powerwash from the sd card (that I had made right after I had flashed the recovery thru odin) Here's the strange part, the recovery had an error and the phone went into boot up. The bootloop from the vanilla gingerbread rom came up (even tho odined over) and now is stuck in a bootloop again. The same as when I was on vanilla gingerbread. No biggie here as verizon is in the process of replaceing the phone just and F.Y.I. maybe help understand some of the issues with gingerbread. P.S. the bootloop starts as triangle with the android robot then right into the cyanogen logo then starts over.
Wait... You sent your borked phone back to Verizon?!
Sent from my SCH-I500 using XDA Premium App
ghostt021 said:
Ok so I ran Jt's vanilla gingerbread for about week and a half and even tho I loved what I saw the rom was to unstable for me. No fried sd card issues but recovery problems and bootlooping issues. So I odined back to stock ed05(full odin) and after flashing CWR v4 decided to go with powerwash debloated ed05. After and foreclosure issue I did a complete wipe and factory reset and flashed a recovery for the powerwash from the sd card (that I had made right after I had flashed the recovery thru odin) Here's the strange part, the recovery had an error and the phone went into boot up. The bootloop from the vanilla gingerbread rom came up (even tho odined over) and now is stuck in a bootloop again. The same as when I was on vanilla gingerbread. No biggie here as verizon is in the process of replaceing the phone just and F.Y.I. maybe help understand some of the issues with gingerbread. P.S. the bootloop starts as triangle with the android robot then right into the cyanogen logo then starts over.
Click to expand...
Click to collapse
..Did you format your phone with the atlas 2.2 PIT file when returning to ED05?
ccampos784 said:
..Did you format your phone with the atlas 2.2 PIT file when returning to ED05?
Click to expand...
Click to collapse
Yes sir. The more I think about it I'm wondering if maybe somehow something from gingerbread remaining on the sd card even tho I also reformatted when I went back to stock.
Skrazz said:
Wait... You sent your borked phone back to Verizon?!
Sent from my SCH-I500 using XDA Premium App
Click to expand...
Click to collapse
Yep. But I flashed it back to stock and did to OTA up date.
You flashed an mtd recovery than flashed a bml rom with mtd recovery. cwm4 should not have even been flashed if you had no intention of flashing an mtd rom.
good day.
chopper the dog said:
You flashed an mtd recovery than flashed a bml rom with mtd recovery. cwm4 should not have even been flashed if you had no intention of flashing an mtd rom.
good day.
Click to expand...
Click to collapse
I thought so too. However the first time odined back to stock and flashed powerwash it had it's own CWR v4 are to two different? They look to same except for the logo (rom manger on gb and a banana on pw)
ghostt021 said:
I thought so too. However the first time odined back to stock and flashed powerwash it had it's own CWR v4 are to two different? They look to same except for the logo (rom manger on gb and a banana on pw)
Click to expand...
Click to collapse
Interesting, I hadn't noticed that. I Odined a full stock tar package with the stock recovery when I came off of VGB. Now on Powerwash CWR shows as v4.0.1.4 with a banana background. I don't see any mention of this in the Powerwashed OP. Any clue what's going on? I may try a full reflash tonight if I get the time. It will distract me from debating whether to go back to VGB.
drnihili said:
Interesting, I hadn't noticed that. I Odined a full stock tar package with the stock recovery when I came off of VGB. Now on Powerwash CWR shows as v4.0.1.4 with a banana background. I don't see any mention of this in the Powerwashed OP. Any clue what's going on? I may try a full reflash tonight if I get the time. It will distract me from debating whether to go back to VGB.
Click to expand...
Click to collapse
Wish I knew. I odined the stock packages three times myself. Once my phone was reading only half of the sd card (nothing thru gallery had to use astro to view pictures) music was fine. So I reformatted the card and Odin the stock package just to be safe. Also I just a error status 7 message in recovery and then a bootlloop. So I odined back to stock using the package with pit file thinking maybe I goofed something. I flashed vgb again with no theme(just in case that was the problem) it ran great for a couple of days, then I pulled my sd card to load some wallpaper onto it from my ps3 and when I placed the card back in the phone same problem nothing could be viewed in gallery even tho phone showed card was present thru setting and under sd card and storage.. When I booted into recovery again I got status 7 error cant' mount recovery followed by the bootloop from hell. So using the odin package I odin back to stock and this time only flashed cwr v4 recovery (that's when I noticed the different logo) I did nothing else I was running debing,debloated Ed05 did a factory reset cause my contacts was dulipating bad from 171 to 829. As soon as I rebooted I got the cyanogen logo followed by the triangle with a "?" bootloop from hell. Not sure what happened again wish I knew
drnihili said:
Now on Powerwash CWR shows as v4.0.1.4 with a banana background.
Click to expand...
Click to collapse
Sounds like that is the 0808 PBJ kernel.
xwhofarted said:
Sounds like that is the 0808 PBJ kernel.
Click to expand...
Click to collapse
That would be my guess about the banana, but I'm a bit confused by the CWM4. Does powerwashed routinely install that?
drnihili said:
That would be my guess about the banana, but I'm a bit confused by the CWM4. Does powerwashed routinely install that?
Click to expand...
Click to collapse
I would assume since the PBJ is the latest kernel out there for Froyo and TW. I wouldnt see why it wouldnt be included.
Hey guys I had just started to think that I had seen it all but it turns out that I havnt. So let me start off by saying I've tried following this guide here: http://forum.xda-developers.com/showthread.php?t=1026746
To get back to stock but when I boot I get to the lock screen and all is fine but when I go to unlock the phone and get to the os around 5 different things force close ranging from touch wiz to settings and to google app packages and I also get a system UID inconstant error and asks if im feeling lucky (but it does matter because I cant get to the home screen seeing as that touch wiz is force closeting constantly) . So... (Deep Breath) I have tryed wiping (factory data reset), wiping cashe partition and dalvik also formating everything I can in the advanced tab in CWM. So please give me and hand with my issue and if you have a file i need to download please post a link with it.
Thanks
riom4 said:
Hey guys I had just started to think that I had seen it all but it turns out that I havnt. So let me start off by saying I've tried following this guide here: http://forum.xda-developers.com/showthread.php?t=1026746
To get back to stock but when I boot I get to the lock screen and all is fine but when I go to unlock the phone and get to the os around 5 different things force close ranging from touch wiz to settings and to google app packages and I also get a system UID inconstant error and asks if im feeling lucky (but it does matter because I cant get to the home screen seeing as that touch wiz is force closeting constantly) . So... (Deep Breath) I have tryed wiping (factory data reset), wiping cashe partition and dalvik also formating everything I can in the advanced tab in CWM. So please give me and hand with my issue and if you have a file i need to download please post a link with it.
Thanks
Click to expand...
Click to collapse
I'll say just use ODIN. Download the program, EH03 (if you're Verizon), and PIT v2.2. If you need additional help use this link.
http://forum.xda-developers.com/showthread.php?t=1026746
AdelosMeansUnknown said:
I'll say just use ODIN. Download the program, EH03 (if you're Verizon), and PIT v2.2. If you need additional help use this link.
http://forum.xda-developers.com/showthread.php?t=1026746
Click to expand...
Click to collapse
I've already tryed odin and uing the pit it boots but has tons of fcs and errors
If you can find the stock eclair ROM (2.1) it might be worth flashing. It has a 2.1 pit that seems to format more completely and works better for me, then I odin GB with 2.2 pit. I seem to have trouble reformatting with 2.2 .pit and 2.1 .pit works every time. 2.1 pit file is also the only one that will correctly fix ext formatting such as voodoo lagfix. I'm on us cellular so my files won't help.
Sent from my SCH-I500 using xda premium
mezster said:
If you can find the stock eclair ROM (2.1) it might be worth flashing. It has a 2.1 pit that seems to format more completely and works better for me, then I odin GB with 2.2 pit. I seem to have trouble reformatting with 2.2 .pit and 2.1 .pit works every time. 2.1 pit file is also the only one that will correctly fix ext formatting such as voodoo lagfix. I'm on us cellular so my files won't help.
Sent from my SCH-I500 using xda premium
Click to expand...
Click to collapse
hey if you dont mind later could you link me to the 2.1 pit i think that i can find it but just in case. thanks for the advice i will post with results
You should definitely take a look at DROIDSTYLES GUIDE. Its in the General section.
Sent from my GT-I9300 using xda app-developers app
Dl01 2.1 eclair file is here, I would download all those fassy stock ROMs for future needs:
http://forum.xda-developers.com/showthread.php?t=1526488
The pit he has linked is 2.2.2. If that doesn't work I have 2.2.1 here:
http://db.tt/KfdoMJo9
Report back please. Hope this helps.
Sent from my SCH-I500 using xda premium
mezster said:
Dl01 2.1 eclair file is here, I would download all those fassy stock ROMs for future needs:
http://forum.xda-developers.com/showthread.php?t=1526488
The pit he has linked is 2.2.2. If that doesn't work I have 2.2.1 here:
http://db.tt/KfdoMJo9
Report back please. Hope this helps.
Sent from my SCH-I500 using xda premium
Click to expand...
Click to collapse
Ok im pushing now using your 2.2.1 pit i guess if this doesn't work i could try heimdall but i have never used it before and am skeptical to so wish my luck if this doesn't work ill report back
I didn't see you mention it in your earlier posts but are you making sure re-partition is checked in odin when flashing stock ROM with pit file? If not, do it. If so, disregard.
Sent from my SCH-I500 using xda premium
mezster said:
I didn't see you mention it in your earlier posts but are you making sure re-partition is checked in odin when flashing stock ROM with pit file? If not, do it. If so, disregard.
Sent from my SCH-I500 using xda premium
Click to expand...
Click to collapse
Yup its selected just and update i tryed the 2.2.1 pit with 2.1 and odin stopped working each time i tryed it and then i tryed 2.2.2 pit and it would "boot" but the screen wouldn't turn on im trying 2.2 pit now
Never mind I read your post wrong.
Sent from my SCH-I500 using xda premium
riom4 said:
Yup its selected just and update i tryed the 2.2.1 pit with 2.1 and odin stopped working each time i tryed it and then i tryed 2.2.2 pit and it would "boot" but the screen wouldn't turn on im trying 2.2 pit now
Click to expand...
Click to collapse
just an update i tryed the 2.2 2.2.1 and 2.2.2 pits and none of them worked I also tryed without the pit and got the same result so now im going to try with gingerbread
wish me luck
riom4 said:
just an update i tryed the 2.2 2.2.1 and 2.2.2 pits and none of them worked I also tryed without the pit and got the same result so now im going to try with gingerbread
wish me luck
Click to expand...
Click to collapse
Fingers crossed
Sent from my SCH-I500 using xda premium
mezster said:
Fingers crossed
Sent from my SCH-I500 using xda premium
Click to expand...
Click to collapse
nope nothing worked trying to wipe everything but i went to wipe /system but it said I couldn't because it wasn't able to unmount it so im going to wipe every thing and do an old nan-droid and see if i can get it to work. otherwise any ideas???
Heimdall? People have reported success with it when Odin fails. Never used it myself.
Sent from my SCH-I500 using xda premium
mezster said:
Heimdall? People have reported success with it when Odin fails. Never used it myself.
Sent from my SCH-I500 using xda premium
Click to expand...
Click to collapse
ill give it a shot later to tired to think now so yea.... stay tuned for an adventure
ok so I made some progress I got cm 7.1 to boot up okay but in settings>storage and under internal storage it says total space 0.00b and available space 0.00b so what do i do?
Can you tell us exactly what steps you're using when you use Odin? I noticed the guide you linked to in the OP was a really old sticky. Droidstyle's Guide is the only one that is currently up to date. It doesn't mean you've done anything wrong with Odin, I just want to make sure you have the files in all the right places and the correct check boxes checked.
Please post questions in Q&A
Thread moved
Thank you for your cooperation
Friendly Neighborhood Moderator