hi there, i've searched and searched and cannot for the life of me find any stock roms or anything for the telus fascinate it probably doesn't help that I don't know what the build number is... I flashed a verizon vibrant rom quite a while ago and don't remember my methods of doing so, I've read that it's going to be a huge PITA to get it back to stock, especially because I can't seem to get it into ^&%^*% recovery mode or even get it to connect to my pc.. so any help in that regard will also be MUCH appreciated
THANK YOU in advance.. I hope!
Alright so i managed to find an all in one zip file in a tutorial post obvs i didn't look hard enough lol!
So that just leaves me with the more important predicament. I can't get my phone into recovery mode to flash with odin and my pc won't connect to the pc at all.. I read somewhere that my phone is soft-bricked???? Because of using a vibrant Rom? Any input is greatly appreciated once again
P.s can a mod change the title? Or can i? Because its slightly irrelevant to the post now
Sent from my GT-I9000 using XDA App
Can you link the All in One ODIN you are talking about?
I sure can here it is
http://forum.xda-developers.com/showthread.php?t=923712
coincidentally this is also the exact procedure i followed when I rooted and flashed.
so a little more information for you.
sorry about the reply taking forever i couldn't find the post on my phone and haven't had much time to sit on the computer
AntoineDon said:
So that just leaves me with the more important predicament. I can't get my phone into recovery mode to flash with odin and my pc won't connect to the pc at all.. I read somewhere that my phone is soft-bricked???? Because of using a vibrant Rom? Any input is greatly appreciated once again
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
Says your phone model is GT i9000 so you probably flashed a gti9000 rom (Bell Vibrant / international Galaxy S).
Anyway... you need to be in "download mode" to flash via odin. I think you meant phone to pc, but were you able to connect your phone to the pc before? Do you have the correct drivers installed?
You know you're in soft-bricked if when you turn on the phone, you get a picture of a phone to pc with a ! in between. This can be fixed by a USB jig, or for some, just doing the download mode button combination while your battery is out and your usb is plugged into the computer.
What rom did you install exactly?
Yes i realise that i suppose that's what i meant but odin doesn't pick up my phone and my pc won't either. I used to be able to connect yes but now it won't I have the drivers downloaded i havent had the chance to try a different cord but this is the same cord i used to flash, so im pretty sure that's not the problem.
I guess its not soft bricked then i haven't seen anything like what you have described,
The Rom im using is called EXTRAordinary Rom or something like that ill try and find a link for you
Sent from my GT-I9000 using XDA App
Bump? This is a serious issue for me as my Bluetooth is not working and things are constantly force-closing...
Sent from my GT-I9000 using XDA App
If you have gotten your phone into download mode and your pc isn't recognizing it, you should; 1 - try a different pc, 2 - try a different cable or 3 - try both. Are you still able to get it into download mode?
Ughh I've tried every computer in my house, 3 laptops and one desktop...
My personal laptop is the only one it worked on previously, it now doesn't work, and I only have the original cable i did the flashing with originally, but i'll yoink a cable from work tomorrow do test that out, although I am seriously doubting it would work... my widgets have recently stopped working as well, they say "problem loading widget" I'm pretty scared by this point and feel as though my phone is sloooowly hardening into a useless brick. i'll update tomorrow, when I get a new cable.
um also, I've posted this question in a different thread but have yet to be answered, why can't I find the telus usb drivers anywhere? they don't have it on samsung's website,,, i haven't installed any drivers since the original flashing and have no clue as to where to find them... as far as I could remember it was ridiculously easy to find them last time....
Thanks in advance,
Antoine
try installing samsung kies-worked for me once
Related
So sorry to bother you people with my little problems but as long as my phone is in dl mode the pc says device not recognized any other screen and its fine. Recovery, galaxy screen so how do I flash back to jfd from were I'm at or are there other options. I really am at my ropes end. 3 days I've fought with this thing. Thank you for any help you can give
Sent from my T-Mobile myTouch 3G Slide using XDA App
I'm going to grab at air here, but do you have Odin up before you stick it in download mode? it should be..... try unpluging usb and plugging it back in while in download mode with odin running... (DO NOT I REPEAT DO NOT unplug while actually flashing with Odin... it will soft brick your phone) just saying.. if it hangs while flashing it can still be recovered.. of course.. but the first time i softbricked my phone i was like OH SH1T!!!! my wife gonna kill me.... lol
Out of curiosity, is your usb port 2.0? Mine would never get recognized on older computers that didn't have usb2.0.
Sent from my SGH-T959 using XDA App
I had the same problem a while back... what you have to do is make sure you have all of the correct driver's for ur vibrant installed on your computer in order for your computer to recognize it. go to samsung's website at this link ( http://www.samsung.com/us/support/downloads/ ) and enter your phone info in. When the next screen comes up, click on the "Software" tab at the top of the screen. You then need to click on the second one down (Device(Install) (Software) (ver.10095.9) ) and download/install that to your computer. Make sure you open it after you install it to make sure you have all of the driver's installed (it should do this automatically). after you reboot your computer, open odin, and connect you phone to your pc in download mode, it should now see it. let us know if this works for you...
web_ninja said:
I'm going to grab at air here, but do you have Odin up before you stick it in download mode? it should be..... try unpluging usb and plugging it back in while in download mode with odin running... (DO NOT I REPEAT DO NOT unplug while actually flashing with Odin... it will soft brick your phone) just saying.. if it hangs while flashing it can still be recovered.. of course.. but the first time i softbricked my phone i was like OH SH1T!!!! my wife gonna kill me.... lol
Click to expand...
Click to collapse
First off the wifey don't know yet I told her I was testin this mytouch I found. Lol second. I've tried every whichaway. But I am thankful for the input.
Sent from my T-Mobile myTouch 3G Slide using XDA App
reinstaling drivers while hphone is connected to computer with debug on helped me
also you may want to make sure you have Odin v1.3. v1.0 was complete doo-doo.
I did use the doodoo version. But as u guys can see by the signature below all the advise worked...many thanks to all of you who helped...thank you soo much. I still need to update to 2.2
P.s. wife never found out I broke my phone...WIN!
Sent from my SGH-T959 using XDA App
Some facts:
My last rom on the phone was CM7
I can get into download mode but I cannot get into recovery
The drivers on my pc (windows 7 x64) are not installed correctly. I've tried the vibrant drivers and Nexus S drivers.
When I boot the phone on I just get the Vibrant/samsung Logo and it just stays there.
Since I can't get into my phone I cant turn on or disable USB Debugging.
I have SDK on my pc with the drivers in the google usb folder but they do not work.
How can I get my pc to recognize the device w/o being able to turn on USB debugging. I'm I stuck even though I can get into download mode?
just keep trying with download mode
took me like 2 hours of trying the other night to get mine to connect when i soft bricked
http://forum.xda-developers.com/showthread.php?t=1046315
drivers are there
kyle51 said:
just keep trying with download mode
took me like 2 hours of trying the other night to get mine to connect when i soft bricked
http://forum.xda-developers.com/showthread.php?t=1046315
drivers are there
Click to expand...
Click to collapse
I don't even know what to say. After 8 straight hours of trying to install drivers and what not I spent the last 15 mins just plugging in and unplugging the phone restarting download mode and probably on the 50th try it just read it. I don't know what it just did. Thanks for the advice!
jayquik03 said:
I don't even know what to say. After 8 straight hours of trying to install drivers and what not I spent the last 15 mins just plugging in and unplugging the phone restarting download mode and probably on the 50th try it just read it. I don't know what it just did. Thanks for the advice!
Click to expand...
Click to collapse
np, glad it worked
my usb on my phone's dodgy, it only charges though usb and only with the usb i got with the phone but doesnt connect to pc as soon as i plug it in, it takes like an hour, so i just have to keep trying when it comes to that
Thanks guys back to fully working phone
I have the same problem. Now this is my first time with this phone as it is a friends. I installed TW bionic rom on her phone with no problem. Then tried the MIUI rom on the first page of the development section then the phone just bootlooped. So after pushing to many buttons in a very noobish move the phone just stays on the vibrant screen. So my question is where do I go from here? I will attempt to try you method to get the laptop to recognize the phone but maybe some links to help me out would be great.
Sent from my DROID2 GLOBAL using XDA App
snowride20 said:
I have the same problem. Now this is my first time with this phone as it is a friends. I installed TW bionic rom on her phone with no problem. Then tried the MIUI rom on the first page of the development section then the phone just bootlooped. So after pushing to many buttons in a very noobish move the phone just stays on the vibrant screen. So my question is where do I go from here? I will attempt to try you method to get the laptop to recognize the phone but maybe some links to help me out would be great.
Sent from my DROID2 GLOBAL using XDA App
Click to expand...
Click to collapse
id say miui's for more experienced users, it uses a different install meathod (same as cm7)
get odin and the pit and tar files (if you havent already)
http://forum.xda-developers.com/showthread.php?t=1047087
power off the phone
open odin
hold volume up and down
plug usb in
or
open odin
pull the phone battery
plug usb in
hold vol up and down
push battery back in (while holding vol buttons)
both of these ways should put you in download mode, if they dont straight away just keep trying and try different ports on your computer
Thanks for the link to that thread. I wasn't having much luck last night finding links that weren't broken. Downloading the rest of the files now so ill post back soon with results. Odin finally recognized the phone so I think this should go well. Not sure what I did wrong flashing MIUI, its not my first time running the rom just never used a vibrant before.
Sent from my DROID2 GLOBAL using XDA App
make sure factory reset isnt checked in odin, unless you want to wipe everything
always checked in mine for some reason, didnt notice last time and lost all my angry birds lol
Thank you very much for posting that link. It should honestly be stickied for all to find more easily since the one that is currently stickied has dead links. Everything worked, managed to reboot and reinstall team whiskey bionic rom then restore the last back up I made. If it wasn't for these forums I don't know where I would be.
Sent from my DROID2 GLOBAL using XDA App
snowride20 said:
Thank you very much for posting that link. It should honestly be stickied for all to find more easily since the one that is currently stickied has dead links. Everything worked, managed to reboot and reinstall team whiskey bionic rom then restore the last back up I made. If it wasn't for these forums I don't know where I would be.
Sent from my DROID2 GLOBAL using XDA App
Click to expand...
Click to collapse
it is, noob guide - root, odin, flash..........
the link's in there
Somehow I missed it but thanks again
Sent from my DROID2 GLOBAL using XDA App
right at the top
NOOB GUIDE: HOW TO ROOT/ODIN/FLASH/RECOVER ** 04/28/11 W/ Videos **
Originally Posted By: s15274n
Okay guys, never let me down before, lets see if you can keep a perfect score
This is not my first time rooting, i've rooted at least 3 phones thus far, and I am trying to root my Samsung Fascinate. I've tried z4root, Superoneclick and adb. None of them took. I believe it may be something with my drivers, but before I get into specifics, let me give you my information:
~~~~PHONE~~~~
Hardware version: I500.04
Model SCH-I500
Firmware: 2.2.2
Kernel version: 2.6.32.9
Build Number: SCH-I500.ED05
~~~~COMPUTER~~~~
Microsoft Windows XP Media Center Edition Version 2002 Service Pack 3.
Ok so now that's out there, what am I doing wrong? when I tried z4root 1.3.0, it got the point where it said "acquiring root shell, then the phone vibrated 3 times and the app closed. Super one click, the prompt got stuck on "waiting for phone" ADB, the device won't even show up in the list of devices. I can't seem to find the right drivers anywhere.
It may be important to note that I am using my data cable from my optimus v, and when I plug it in, the micro-usb dongle doesn't go all the way into the port on the fascinate. However, the fascinate gives me the notification that usb mode can be activate and that debugging is on, etc.
I made sure that mock locations, and usb debugging were both on.
Any help?
Follow these steps in link:
http://www.galaxyforums.net/forum/fascinate-rs-guides/1967-how-root-froyo-gingerbread-your-fascinate.html
Ive always used ADB and pushed over the files and such.
However are you going to flash another rom? If so just Odin recovery, flash the rom and be done with it.
I have to have root for that right? My drivers aren't working, is there a way to flash it with out a computer
OhioYJ said:
Ive always used ADB and pushed over the files and such.
However are you going to flash another rom? If so just Odin recovery, flash the rom and be done with it.
Click to expand...
Click to collapse
Sent from my LG Optimus V running Sense 3.0
You need a REAL cable... If computer doesn't see the phone via the drivers, nothing is going to work.
OhioYJ said:
However are you going to flash another rom? If so just Odin recovery, flash the rom and be done with it.
Click to expand...
Click to collapse
agreed! If you want a different rom, alot of the steps in that link I posted a not needed. Just odin the proper recovery for the rom you intend on flashing. boot into recovery and wipe data,cache,dalvik, then install rom.zip from sd card. reboot and the phone should be rooted.
droidstyle said:
Follow these steps in link:
http://www.galaxyforums.net/forum/fascinate-rs-guides/1967-how-root-froyo-gingerbread-your-fascinate.html
Click to expand...
Click to collapse
Downloaded everything in the link, installed drivers, I'm on my friends laptop now, still xp. I got to the step where I have to find CWM3 Voodoo in Odin, and the instructions say that one of the boxes should have turned yellow, but it didn't. I went on ahead and clicked the pda button, but it just said success 0/failure 0. What do I do? Do I have to have vista?
That means odin is not recognizing the phone. Im not sure if odin works with xp or vista... I only use 7 these days. Actually if my memory serves right, odin dont work with xp, don't quote me tho. You could try heimdall but I have no experience with it.
Still can't squire root.I've factory rest 3 times now and still nothing. Can no one help?
Sent from my LG Optimus V running Sense 3.0
If u can't get odin or heimdall to work, you won't be able to root. Do you not have windows 7
droidstyle said:
If u can't get odin or heimdall to work, you won't be able to root. Do you not have windows 7
Click to expand...
Click to collapse
as stated in the op, I explicitly said I am using windows xp, media center 2002, service pack 3 to be specific. So your telling me I'm S.O.L.?
first, get a real cable
then, go to official samsung website and install the correct fascinate drivers
download and open odin v3 1.30 (I have xp and it works)
plug in phone in download mode, wait for odin box to turn yellow
pick file in pda
and press start
then just go into cwm via 3 fingers and flash rom
dragon1357 said:
first, get a real cable
then, go to official samsung website and install the correct fascinate drivers
download and open odin v3 1.30 (I have xp and it works)
plug in phone in download mode, wait for odin box to turn yellow
pick file in pda
and press start
then just go into cwm via 3 fingers and flash rom
Click to expand...
Click to collapse
I have my cable from my samsung intercept, would that work? By the way thanks for being so informative. Could you pm the drivers you used, if you have them?
Sent from my LG Optimus V running Sense 3.0
I'm not saying that you shouldn't be doing this but I think you need to slow down and read some more before trying. While this phone is pretty dang hard to brick without physical damage, lacking basic knowledge can put you down got a while if something goes wrong.
A good place to start is the qa stickies. Again I'm not saying don't, just maybe give it another day or two. Really sucks rushing in soft bricking and having to learn after with no phone in the mean time.
XDA Prem app Running UKB w PBJ
MattRussNC said:
I'm not saying that you shouldn't be doing this but I think you need to slow down and read some more before trying. While this phone is pretty dang hard to brick without physical damage, lacking basic knowledge can put you down got a while if something goes wrong.
A good place to start is the qa stickies. Again I'm not saying don't, just maybe give it another day or two. Really sucks rushing in soft bricking and having to learn after with no phone in the mean time.
XDA Prem app Running UKB w PBJ
Click to expand...
Click to collapse
Not trying too be an ass or anything but 1.) This is my 5th or 6th time rooting. I have more than basic knowledge. 2.) This is a spare phone I picked up dirt cheap for development. 3.) I checked every place possible trying to find out why my drivers weren't working including q&a.
That aside, I'm trying it on my friends laptop with vista. Wish me luck.
Sent from my SCH-I500 using XDA App
Ok so i was in my flash happy mood earlier today..
I saw that ICS slim was updated and was going to try that, well i had ICZen on my phone at the time and tried to flash Slim, well blah blah, it didnt work.. The op told me to flash from a rom that had cm9 (iczen has glitch) so i flashed Lithium MIUI--went back into recovery and started to wipe.. i wiped everything.. So i went to go flash ics slim, and as soon as i pressed 'Yes, install..' it was installing for a very short bit, then all a sudden a reboot and got stuck on the rainbow screen...
I cannot go back into recovery, but i can go into download mode.. BUT this is where the kicker is......
My computer doesnt recognize my device... ive installed driver after driver to get it to recognize. Well, no avail
Even tried installing the drivers on 6 other friends computers (at my college) and all of them still didnt recognize my device..... SMDH.. been trying to fix this all day and im pissed.
Any ideas what to do? Hate to go out and buy another phone......
And before yall say 'you cant flash miui and then go straight to ics, you have to odin' --- No, i did it all the time.. This time something went wrong and idk what
Wow, 158 views and no replies..
Guess i did permanently brick it.. ok
If you can get in to download mode, you're not bricked.
I've read/heard that since our ICS roms are built off of Nexus code, you need to install the nexus drivers. Have you tried doing that? Also, are you sure it's not a bad cable? Try another samsung cable (if you can get a hold of one) to be sure.
dpaul007 said:
If you can get in to download mode, you're not bricked.
I've read/heard that since our ICS roms are built off of Nexus code, you need to install the nexus drivers. Have you tried doing that? Also, are you sure it's not a bad cable? Try another samsung cable (if you can get a hold of one) to be sure.
Click to expand...
Click to collapse
yes, ive installed the nexus drivers too.. im positive its not a bad cable, ive used it on my computer before hand.. and yea, ive tried another cable as well..
I remember experiencing something like this a while back. i softbricked, could enter download mode, but the computer would not pick up my phone. i dont remember an exact solution, i just remember downloading all sorts of drivers and eventually i got it to pick up.
matholomus said:
Wow, 158 views and no replies..
Guess i did permanently brick it.. ok
Click to expand...
Click to collapse
as far as views:replies, you have to realize that even though you are in panic mode (weve all been there, so we know how you feel), that doesnt necessarily mean people are automatically going to have an answer for you. in this type of situation, its virtually impossible for anyone to tell you an exact solution (if there is one) unless they are sitting right next to you.
TopShelf10 said:
I remember experiencing something like this a while back. i softbricked, could enter download mode, but the computer would not pick up my phone. i dont remember an exact solution, i just remember downloading all sorts of drivers and eventually i got it to pick up.
as far as views:replies, you have to realize that even though you are in panic mode (weve all been there, so we know how you feel), that doesnt necessarily mean people are automatically going to have an answer for you. in this type of situation, its virtually impossible for anyone to tell you an exact solution (if there is one) unless they are sitting right next to you.
Click to expand...
Click to collapse
Wow really? Damn.. remember what kind of drivers? ive used the samsung usb drivers and nexus s drivers..
But yea, i guess ur right.. sorry for the other post, i was (and still am a little) mad at the time
Try installing kies or kies mini, it did the trick for me when i was in a similar situation
Sent from my SGH-T959 using Tapatalk
matholomus said:
Wow really? Damn.. remember what kind of drivers? ive used the samsung usb drivers and nexus s drivers..
But yea, i guess ur right.. sorry for the other post, i was (and still am a little) mad at the time
Click to expand...
Click to collapse
i honestly wish i could tell you exactly, this was a whiiile back, prob over a year.
all i remember was a lot of installing/uninstalling/reinstalling drivers, rebooting comp/phone, unplugging/replugging....it seemed like there was no hope so all i could do all day was fiddle and just hope and pray that i would do something right and the phone would read
im not going to lie though, it does sound pretty bad that youve tried it on multiple computers. that means your possible problems are (from most to least severe):
1. Busted USB port
2. Wrong drivers installed
3. Malfunctioning chord
Although i WILL say: make sure all of your USB connections are free of lint, gunk, etc. I know this sounds like one of those stupid, default troubleshooting steps, and i always looked down my nose at it. however there was a point in time the the comp wouldnt pick up my phone. i tried eeeeverything to remedy it and nothing was working. sure enough, i looked at the standard usb connector on my charging chord and it was FILLED with pocket lint. once i picked it out, BAM good as new!!
bfranklin1986 said:
Try installing kies or kies mini, it did the trick for me when i was in a similar situation
Sent from my SGH-T959 using Tapatalk
Click to expand...
Click to collapse
Did kies as well lol.. didnt work.. when it told me to connect my mobile device, i did. but it didnt register
TopShelf10 said:
i honestly wish i could tell you exactly, this was a whiiile back, prob over a year.
all i remember was a lot of installing/uninstalling/reinstalling drivers, rebooting comp/phone, unplugging/replugging....it seemed like there was no hope so all i could do all day was fiddle and just hope and pray that i would do something right and the phone would read
im not going to lie though, it does sound pretty bad that youve tried it on multiple computers. that means your possible problems are (from most to least severe):
1. Busted USB port
2. Wrong drivers installed
3. Malfunctioning chord
Although i WILL say: make sure all of your USB connections are free of lint, gunk, etc. I know this sounds like one of those stupid, default troubleshooting steps, and i always looked down my nose at it. however there was a point in time the the comp wouldnt pick up my phone. i tried eeeeverything to remedy it and nothing was working. sure enough, i looked at the standard usb connector on my charging chord and it was FILLED with pocket lint. once i picked it out, BAM good as new!!
Click to expand...
Click to collapse
i literally restarted my computer 7-9 times from uninstalling and installing driver after driver.. been doing this all morning.. no class, lol thank god. so im in the dorm getting my nerd on..
tried it again on 2 other computers (installing drivers and what not) didnt work.. Tried 2 other usb cables, didnt work..
Tried ur method of cleaning usb ports, didnt work lol.. (i blew in them/phone too)..
im currently on C.L. lookin for a new phone, I WOULD hate to have to leave the vibrant community.. yall been great with roms/drama LOL..
im slowly losing hope on this .. but im continuing to try and fix this
Couple of things. Why don't you go over to the Dev section and download the AIO toolbox. Tiber I think has a link in one of the last posts that should still be working. It has all the pit/tar files, drivers (I know, I know), Odin and is very handy. Don't forget to make usre you have the .net files too.
Then try this
Make sure you have ODIN OPEN with admin privileges!
1.) Take off your back cover, remove your sim & mirco sd card.
2.) Remove your battery.
Make sure you have the USB plugged into your PC but NOT your phone!
3.) Hold the volume buttons.
4.) Put the battery in.
5.) Put the USB in.
You don't necessarily need the download mode image to be present. As long as you are getting the COM ID to light up yellow in ODIN, just flash back to stock like normal.
Click to expand...
Click to collapse
If all else fails, just keep trying. It boots up to Download mode so it is salvagable and not hard bricked. If you do end up finding a new phone on CL and want to donate you Vibrant, i am looking for one to work on some things with.
Woodrube said:
Couple of things. Why don't you go over to the Dev section and download the AIO toolbox. Tiber I think has a link in one of the last posts that should still be working. It has all the pit/tar files, drivers (I know, I know), Odin and is very handy. Don't forget to make usre you have the .net files too.
Then try this
If all else fails, just keep trying. It boots up to Download mode so it is salvagable and not hard bricked. If you do end up finding a new phone on CL and want to donate you Vibrant, i am looking for one to work on some things with.
Click to expand...
Click to collapse
thanks... but the aio toolbox is not going to the download link for me. the download link is down or something.
i did download the .net files tho, jus cant download the toolbox
So the one Rapidshare from Tiber isn't working? What about the one from OldeCrow 2 posts up. If neither of them are working, I can get it to you later on tonight when I get home from work.
Regardless, if you have the drivers and have Odin installed, try the tricks in my earlier post and see it works that way. Panic mode is probably not deep set in, don't worry we'll get it on.
When you say yours (and 6 others) don't recognize the phone, are you talking about Mass Storage mode or do all 6 of your friends have Odin installed on their computers? Might seem like a BS question and I am sorry about that but it is a one or the other type situation. It will be in download mode OR mass storage.
Can you boot into recovery by chance?
Depending on what bootloader you have it will be (Froyo) Vol+/- and power or (GB) Vol+ and Power. Also not to sound noob-ish but just bc you have a GB ROM doesnt mean you have GB bl's. Dealt with that with someone else this week and fought me tooth and nail over it.
if you have clockwork mod installed you can put a rom on your SD card through your computer, wipe your phone and then flash the from with a full wipe.
Sent from my HTC Desire HD using xda premium
That is what I am getting at.
If he can get into CWR then he can mount the phone to the computer in Mounts and Storage, put a simple 2.2 ROM on there and get it to boot up so that it works. then figure out the driver thing later on once we can get it to fully boot up.
Woodrube said:
So the one Rapidshare from Tiber isn't working? What about the one from OldeCrow 2 posts up. If neither of them are working, I can get it to you later on tonight when I get home from work.
Regardless, if you have the drivers and have Odin installed, try the tricks in my earlier post and see it works that way. Panic mode is probably not deep set in, don't worry we'll get it on.
When you say yours (and 6 others) don't recognize the phone, are you talking about Mass Storage mode or do all 6 of your friends have Odin installed on their computers? Might seem like a BS question and I am sorry about that but it is a one or the other type situation. It will be in download mode OR mass storage.
Can you boot into recovery by chance?
Depending on what bootloader you have it will be (Froyo) Vol+/- and power or (GB) Vol+ and Power. Also not to sound noob-ish but just bc you have a GB ROM doesnt mean you have GB bl's. Dealt with that with someone else this week and fought me tooth and nail over it.
Click to expand...
Click to collapse
cant reboot into the bootloader nor recovery.. the only thing i can do is download mode..
I have the GB bootloader.. im sure of it lol
and yes i installed odin and all the files on all 6 of my friends computer.. none of them worked
davil544 said:
if you have clockwork mod installed you can put a rom on your SD card through your computer, wipe your phone and then flash the from with a full wipe.
Sent from my HTC Desire HD using xda premium
Click to expand...
Click to collapse
if i could get into recovery, i wouldnt be posting something like this LOL.. ive unbricked my phone before (that was when my comp recognized the device, now its not)
My device is not recognized by the computer, so my sd cards dont show on the comp
Woodrube said:
So the one Rapidshare from Tiber isn't working? What about the one from OldeCrow 2 posts up. If neither of them are working, I can get it to you later on tonight when I get home from work.
Regardless, if you have the drivers and have Odin installed, try the tricks in my earlier post and see it works that way. Panic mode is probably not deep set in, don't worry we'll get it on.
Click to expand...
Click to collapse
oh and i did do the little tricks you said, i found that op..
that person had the same problem as me and everyone tried to help, they gave him/her links and everything.. i followed with the links too, and just like that person, none of them worked for me either
saw the download link that oldecrow posted.. its working.. downloading now
Ok. Keep trying once it is downloaded and let us know how it is going. I am getting ready to leave work soon, so I won't be on until later tonight but there are plenty of others that can help.
There's also the One-Click Vibrant DeBrick from Adam Outler. I've used it on my netbook on phones with your identical problem and its never failed yet.
Also, Heimdall on Ubuntu will flash it no problem, it does NOT need drivers like Windows does...
http://www.glassechidna.com.au/products/heimdall/
Sent from my SGH-T959 using XDA App
Up and running!!!!!!!!!!!!!!!1
NEVER WOULD HAVE THPOUGHT!! (well i did but...) anyways im up and running now!!!! Wow, idk what happened... it just started working.. i plugged it in and odin recognized it!!..
im on 2.1 again lol.. so all i need to do is go back into recovery and reinstall packages right?
Did i lose root? i forgot
Hi guys.
Tonight I did a data reset via the system settings menu within the OS so that all personal data can be wiped from the phone.
Shortly after I did this, the phone reset, then just started randomly flashing and not booting, occasionally pausing on a totally white screen.
I tried to enter into recovery mode with no luck, and had no luck with download mode either.
My USB jig worked and got me into download mode, and it now also lets me enter download mode via the 3 button method.
I figured I would just use odin to flash a new kernel/ROM, however the phone refuses to come up in odin and is no longer even recognised on my PC (unknown usb device).
I've tried installing and reinstalling drivers, different usb ports, different cable etc and nothing makes any difference.
Anyone have any clue what I can do about this?
PS. The phone was on rootbox rom (unsure of version) and I'm fairly certain it had siyah kernel.
sorry, posted in the wrong section.
please switch it over, mods
No recovery?
Sent from the little guy
What version were you running? GB, ICS or JB? Which kernel? Did you try to flash tar file? Repartition through Odin?
Sent from my digital submersible hovercraft.
It was running ICS, unsure of exact version.
And I did not try to do anything with odin as the phone is not recognised at all any more, doesn't come up in odin..
and yes, I cannot access recovery mode at all via the 3 button method
Didn't it work with the jig?
Tell us what you can do with your device right now.
Sent from the little guy
as above, I can enter download mode, but absolutely nothing else.
no boot, no recovery, phone is not recognised in odin, phone is not recognised by windows.
Can you find the device in windows device manager as unknown device?
Sent from my GT-I9305 using xda app-developers app
Wuxar said:
Can you find the device in windows device manager as unknown device?
Sent from my GT-I9305 using xda app-developers app
Click to expand...
Click to collapse
yep, that's exactly what it comes up as.
Have you tried with another computer?
Sent from my GT-I9305 using xda app-developers app
Hold on, i'm going PC Mode.
In the meantime flash siyah v6
Sent from the little guy
---------------------------------
Try these and report back.
gastonw said:
Hold on, i'm going PC Mode.
In the meantime flash siyah v6
Sent from the little guy
---------------------------------
Try these and report back.
Click to expand...
Click to collapse
mate, I really appreciate you trying to help me but I'm not entirely sure that you are even reading my posts.
I'm not sure how I am supposed to flash a kernel when my device is not even seen (besides "unknown device") on my PC, and does not display at all in Odin.
ps: i've already tried all of those steps in that link, nothing has helped
lolthrash said:
mate, I really appreciate you trying to help me but I'm not entirely sure that you are even reading my posts.
I'm not sure how I am supposed to flash a kernel when my device is not even seen (besides "unknown device") on my PC, and does not display at all in Odin.
Click to expand...
Click to collapse
I've read your post?
Have you read mine?
What are we trying to do here?
To make your PC see your device.....am I right?
yes, the objective is to make my PC see the device.
and seeing as the PC needs to see the device for me to flash anything to it, I'm unsure as to how flashing siyah will help me when I cannot in fact flash anything at all
lolthrash said:
yes, the objective is to make my PC see the device.
and seeing as the PC needs to see the device for me to flash anything to it, I'm unsure as to how flashing siyah will help me when I cannot in fact flash anything at all
Click to expand...
Click to collapse
yeah yeah
You get unkown device when plugged in? delete that.
Install kies.
Already installed? uninstall it.
Re install.
just figured out the problem with it not recognising it via usb, it was a dodgy USB flex that I'd installed to fix a microphone problem (which eventually turned out to not be hardware related).
just swapped back the original board and hey presto, the damn thing is recognised in windows and in odin.
thanks for the help guys
Be carefull now.
Sent from the little guy
wrong post, didnt read your post properly