Help identifying component on HTC Mozart - 7 Mozart General

Hi all!
Recently my girlfriend dropped her HTC Mozart and it landed on the edge with the power/sleep button.
After disassembly, the switch/button has physically been smashed off from the fall.
I've been repairing devices such as the mozart for years, and my soldering skills are very good but I have just one issue.
I could easily solder a new button/switch onto the mainboard, but I don't know what to replace it with?
I've tried searching for HTC component lists and everything to no avail.
I've attached two pictures. One is of the damaged switch/button and the other is one of the other switches (For the volume) which are the same switches/buttons that I need to replace the damaged one. How can I identify it and replace it?
Thanks!
See this thread for slightly better images:
http://www.instructables.com/community/Help-identifying-component-on-HTC-Mozart/
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

http://www.handy-ersatzteil-service.de/produkte/Schalter.html
maybe this helps, the buttons are for nokia and siemens phones but they are just smd-buttons so they should probably work if the sizes match

Related

Alltel touch pro “ribbon” where to buy replacement

Where would I be able to order\buy a replacement “ribbon” pictured bellow for my Alltel touch pro?
Im sure it has a specific name but I don’t know it lol
Mine is damaged and needs to be replaced, thanks in advance for any help
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
goto
http://www.mikechannon.net/
load up the manual for ur phone and then find the part # then from there go back to the site and goto the parts section and it has many ppl to get them from or contact to order the part but never had tried them
if that doesnt work from there google is your friend and so is ebay... now that you have the part # its a lot easier
if you can also find some autherized repair shop they may be able to order it for you ...
good luck...
the other possibilty is find a noob thats selling thirs that is broken because they cracked the screen or dropped it in water

Touch Screen Issue

Hi guys,
I had a look around but i couldn't find anything helpful. I got a really annoying issue about the touch screen. My Atrix has a sort of dead area corresponding to the center of the screen.
image:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
( that red rectangle is the dead line )
The point is I can't even enter the application menu or write a message ( infact this "dead line" makes also unusable the upper side of the keyboard in landscape mode ). My phone is completely out of order.
I am sure this problem has gotten worse during this last week, but i can't realize what caused it.
Thank you for your time.
Did you search the forum at all? This is an extremely common thing, already explained many times.
Your digitizer is dieing. It will need to be replaced. Sorry. On the bright side, if you don't mind replacing it yourself, a new digitizer is only about $30-$40.

Screen Goes Black

While i was talking on phone by using handsfree, i was using facebook, and then suddenly screen starts getting black from bottom, is there any solution of this except replacing screen?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
http://youtu.be/FAQy4rnjqVI
Just saw the video, I honestly don't think there's any solution but to replace the LCD. Your Amaze hardware is dying, unfortunately. Hopefully someone else chimes in with any other suggestions because you can't do much if it's a hardware failure. Take it to a repair shop first before considering to fix it yourself please, thanks.
Salam
Yeah, I agree with SuperAfnan, it looks like an LCD issue. Most definitely it's hardware not software related. If the cost of repair is prohibitive, you should still be able to back-up and save your data via USB with ADB.
From here is most likely a hardware issue, recommend backup at the very least sommething might be off-placed maybe the flex but may be lcd or even board. Good luck.

[GO] Problem to replace internal speaker

Hi!
Anyone's tryied to unmount and replace the internal speaker of this smartphone?
Last day I had to replace the broken lcd+glass of my sony xperia go, I moved this piece
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
from the old glass to the new, I didn't find any kind of cable or connection fort the speaker!
And now the display/lcd works but not so the internal speaker!
I don't know what's wrong and what piece I need to replace, I wouldn't wonder that I've forgot to make some strange connection.
Anyone who had the same problem and who can help me?
Try rotating it by 180° -- I'm not sure about the Go, but the one for the U (which looks the same) it has 2 metal tabs biased to one side...
You openned your phone and replaced LCD without the service manual?

Zenwatch 2 with different casebacks ?

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
It seems that there are two versions of the watch, one with screwed caseback and the other with pressure fitted caseback.
Given that the watch's battery can be replaced, I wonder if it's easy to open the caseback (the one without screws) ?
Thanks for any info.
I'm a professional [desk] diver.
I think the second one is only a render without screw holes. It also doesn't show switch for unconecting bracelet.
Look here http://www.dx.com/p/asus-zenwatch-2...-45-gunmetal-case-grey-852432423#.V-ilH58wjqA at the 5th and 6th photo. Someone just forgot about this
shider said:
I think the second one is only a render without screw holes. It also doesn't show switch for unconecting bracelet.
Look here http://www.dx.com/p/asus-zenwatch-2...-45-gunmetal-case-grey-852432423#.V-ilH58wjqA at the 5th and 6th photo. Someone just forgot about this
Click to expand...
Click to collapse
You made good point, thanks.
I'm a professional [desk] diver.

Categories

Resources