I have a G Tablet, and have used Cyanogenmod 7.0.3 for some time. I thought I would upgrade from 1.1 to 1.2, so I could try some Honeycomb like goodness. Right. Not a good plan.
Thanks Roebeet for NVFlash!
So, I have been trying to reinstall what I had, and I have run up against some troubles. I now have Cyanogenmod 7.0.3 and Gapps 20110307 running on the Gtablet, but I am struggling with the market. At first, I could not get the market to run; all it would do was FC. Thanks to Google-fu, a change in the language to English (United States) got that repaired.
So, the only way I can get stuff installed is to revert back to 2.3.3 market. The new market sees my tablet as Malata Tablet. I have changed build.prop fingerprint, but in the Market on the device, the message I get is "Your device is not compatible with this item". On the web Market, it identifies my tablet as Malata Gtablet. If I downgrade the Market app, I can install Maps and Flash, but when Market upgrades those apps don't show up as apps in My Apps.
So, I need to change more in the build.prop, right? So what the heck do I change? I am not able to mess around for days on end to upgrade to 1.2, I just want to use the tablet for what I was; web, kindle, google reader. I can do that, but I want to fix this weird issue too!
Can anyone help me out? TIA!
What is your ro.product.device = in build.prop?
Try changing it to
ro.product.device=olympus
--
Fixed
Actually, the way I fixed the market issue, was to change the DPI in the build.prop from 161 to 160. Boom, everything works fine.....yes!
G tablet is back baby, I am waiting for cheaper quad core tablets before I even dream about upgrading.....sweeeeeeeet!
Where do I go to change the DPI in the build.prop. Sorry for being such a noob!
I've been told two ways to edit build.prop, one by using ES File Explorer (which is free) and the other by using Root Explorer (which isn't). However, the only way I know to install either is via the Market, which tells me they aren't compatible with my tablet.
I have a chicken-and-egg problem: I can't edit build.prop until I install one of those apps, and I can't install either app without editing build.prop first.
So hopefully there's another way... anyone?
Solo Jones said:
I've been told two ways to edit build.prop, one by using ES File Explorer (which is free) and the other by using Root Explorer (which isn't). However, the only way I know to install either is via the Market, which tells me they aren't compatible with my tablet.
I have a chicken-and-egg problem: I can't edit build.prop until I install one of those apps, and I can't install either app without editing build.prop first.
So hopefully there's another way... anyone?
Click to expand...
Click to collapse
net-widgetron-propeditor - An Android app to edit build.prop files - Google Project Hosting
http://code.google.com/p/net-widgetron-propeditor/
Download
http://www.estrongs.com/en/download.html
HOKAY. I've missed something somewhere. I've set the DPI to 160 rather than 161, but I still get the "not compatible" message.
... but I never give up when technology tells me no. Off to Google!
Solo Jones said:
I've been told two ways to edit build.prop, one by using ES File Explorer (which is free) and the other by using Root Explorer (which isn't). However, the only way I know to install either is via the Market, which tells me they aren't compatible with my tablet.
I have a chicken-and-egg problem: I can't edit build.prop until I install one of those apps, and I can't install either app without editing build.prop first.
So hopefully there's another way... anyone?
Click to expand...
Click to collapse
Someone else probably will answer, but you can get root explorer by using Amazon Market app which you can download and install and while they aren't as complete as the real "market" they also work and don't cause these kinds of problems. (you will have a better experience if you already have an Amazon account.)
Solo Jones said:
HOKAY. I've missed something somewhere. I've set the DPI to 160 rather than 161, but I still get the "not compatible" message.
... but I never give up when technology tells me no. Off to Google!
Click to expand...
Click to collapse
try changing ro.product.device=olympus in build.prop.
Sorry for being so lacking in knowledge on this, but, how do I get to "ro.product.device" to make the change? Where do I find this?
Thank you!
janovak1 said:
Sorry for being so lacking in knowledge on this, but, how do I get to "ro.product.device" to make the change? Where do I find this?
Thank you!
Click to expand...
Click to collapse
Look here
http://forum.xda-developers.com/showpost.php?p=17567049&postcount=97
Related
Greetings. Been haunting this place for awhile, happy to finally have root.
After the phone is rooted the last step is something that sweeps up a bunch of SE's stock apps that most people don't want. What about us who actually liked a few of them, though?
I would have liked to keep the app called "TrackID," and am wondering if there's any way to get it back? I can't really find like a repository for the base APKs (I might want the Mixi plugin for Timescape back in the future, as well).
Can someone rip these out somehow for individual installing?
Here it is:
http://rapidshare.com/files/403753839/trackid.apk.html
Just install the apk.
Its works for me.
Nice threat, nice anwser.
It works fine with me too.
Thanks!
Preventing the rooting process from removing apps
Hello, You could just enter the step4 folder and open the cleanup.sh file in notepad or similar.
Remove the line saying rm *packagename here*. Then your app will only be copied to your SD, but it will also remain on the phone.
track id request
i couldnt download the package, the link no longer works :-(
Could someone uóad it again to another server? Because its a common problem and will br of much help thanks
http://balsat.hopto.org/builds/seX10-system/index.php?dir=..%2FseX10-system%2Fdir%2Fsystem%2Fapp%2F
ok... but now...
I have the app already installed, but now evertime it tries to connect it says "authentication error".... help?
I gave up and rooted the phone again, i went from steps 1 to 3 with no problems, using track id everytime to make sure it worked, and it did, I even used the cleanup script and it was there working very well...
So, I used steps 4 and 5 (for the X10a) But now it wont work... it says "authentication error".... what gives?
Sorry for my english, I´m from mexico...
Everything on my phone is working fine...
For TrackID I can only say that it was probably a rights issue.
Use chmod or Root Explorer to set the rights(644).
For step 4 and 5 i cant help,i have only a 3 step X10i ,sorry.
But dont give up, i think u find the help here on XDA.
So, went out and picked up a Mini Pro for the misses.
Well, off the bat I went crazy cause I couldn't find "Market" and well...after searching online, guess this damn region doesn't support the Market. How wonderful is that, so downloaded stuff online through slideme. Which really still sucks.
Then when I downloaded things to my laptop and wanted to bluetooth them over, I couldn't. Then when I wanted to send ringtones from my phone to the mini pro, I couldn't. So I searched, and wouldn't you know it. I gotta download a program, so I downloaded bluetooth explorer and then it prompted me that I gotta root this SOB to be able to send files through bluetooth? Did I just buy an iPhone or what?!
So I plugged in the phone through USB. And we copied over the APK. and I downloaded a file explorer, so I could get to the damn APK (really no file explorer included, or clearly apparent?). And when we launched the file (MSN), we found we couldn't send files, images, or anything other than text. Are you kidding me?
With all these limitations, how is Android so popular?
Are there any possible solutions without having to root this bastard? (aside from MSN). I just bought this thing and don't wanna void warranty so damn early so I could make it something PRACTICAL like every other phone.
I'm guessing you're used to nokia's and the like. I must say i've found bluetooth file transfer a little hit and miss on android, but you need an app called bluetooth file transfer but it's on the market i'm afraid. Where are you then? You can get the market app from these forums and an enabler for regions not supported so you may need to do some digging.
Sent from my E10i using XDA App
Not used to Nokia's. Used to WinMo and running Android Froyo on my Topaz.
Could not find the market standalone app for the life of me. And the phone is from Saudi Arabia, and I can't justify rooting it just yet.
@bmzloum
Hi! I feel your pain. Android Marketplace is not supported in my part of the world too. I am looking for alternate ways to get apps into my phone.
You mentioned that you had to download a separate File Manager to get to the .apk files. Can you tell me which app you are using?
Also how did you manage to install the File Manager in the first place if you could not get to the .apk files?
Do you copy the .apk files to your MicroSD card? Do you any other advice to make installation easier if we download the Apps to our computer then then try to install them to our phone?
Thanks in advance for any help.
Cheers and good luck with your new phone.
Appbrain App Market and Apktor are viable alternatives for getting apps on your phone, the latter you'll need to find public repositories for. Sorry can't post links cause of restrictions on a new account, but google knows all.
drussthelegend said:
You mentioned that you had to download a separate File Manager to get to the .apk files. Can you tell me which app you are using?
Click to expand...
Click to collapse
Hey, found
Code:
http://slideme.org/
which let me download with the barcode, and then I installed the sites app manager directly on there. There are a ton of file managers, I downloaded two, I forget which. But the two most popular ones. Both worked, but only one handled ZIP files. I don't have the phone beside me, so can't recall...
I found the Market standalone apk, but it crashed everytime I clicked on "Download" so I gave up on it.
I'm gonna try those suggestions posted up and see if they have a few new nice apps on there.
I had the exact same issue as others above. My solution was to use the debranded UK Firmware, root the phone and then use the Bluetooth File Manager.
bmazloum: My phone also came from the UAE side and didn't have the Market. I used Omnius to flash the firmware. A friend of mine on the otherhand paid the local Sony Service Centre to flash and debrand the ROM. Maybe this might help
Guys you don't have to move the apk file over to the phone in order to install it btw... get Adb from the Android SDK and then place the apk file in the same folder as adb.
And then from command prompt, navigate to the folder with adb and your apk and type "adb install example.apk".
Make sure you have USB Debugging (Applications -> Development) enabled and that's it.
Works nicely on a Mini. Not sure about the Pro to be honest.
Hey guys,
I bought thumb keyboard recently and would like to switch the rooted keyboard with this one. When I try to go into keyboard settings in the settings window, it closes me out of the settings with a force close. I tried installing it through Root Explorer but it didn't give me access to the keyboard.
I'm using Honeycomb Launcher, and I tried to create shortcuts like in the guide for using alternate keyboards, but the shortcuts don't appear on Honeycomb launcher. What should I do?
Some keyboards require extra work:
http://forum.xda-developers.com/showthread.php?t=1360036&page=8
I tried to follow the instructions but can't find the apk file. I installed from Market and see the app, see it running but my data folder is empty and I don't see anything in system/app.
rlefranc said:
I tried to follow the instructions but can't find the apk file. I installed from Market and see the app, see it running but my data folder is empty and I don't see anything in system/app.
Click to expand...
Click to collapse
it should show in data/app I'm not sure if you need a root explorer to see the file or not. I use ES File explorer and enable root access from the settings menu. I've got go keyboard, thumb keyboard and Swiftkey Tablet X. All working perfectly
rlefranc said:
I tried to follow the instructions but can't find the apk file. I installed from Market and see the app, see it running but my data folder is empty and I don't see anything in system/app.
Click to expand...
Click to collapse
There's a setting in ES File Explorer along the lines of "show hidden files" or something. Do you have that checked?
I never did find the menu setting in ES to view hidden files but I was able to find the apk using Root Explorer. The issue now is that when I try to paste it into system/app I get a message that the folder is read-only. I've checked all of the settings that I know to...I'm rooted, have debug turned on, using Root Explorer, etc.
---------- Post added at 11:43 AM ---------- Previous post was at 11:30 AM ----------
Strike my last post please...I must have grabbed an old ES apk originally when I was unrooted and just sideloading. Now that I'm rooted and have access to Market I reinstalled the most recent version and have all of the menu settings that I needed to view hidden files and write to system. Thanks for your help!
rlefranc said:
I never did find the menu setting in ES to view hidden files but I was able to find the apk using Root Explorer. The issue now is that when I try to paste it into system/app I get a message that the folder is read-only. I've checked all of the settings that I know to...I'm rooted, have debug turned on, using Root Explorer, etc.
---------- Post added at 11:43 AM ---------- Previous post was at 11:30 AM ----------
Strike my last post please...I must have grabbed an old ES apk originally when I was unrooted and just sideloading. Now that I'm rooted and have access to Market I reinstalled the most recent version and have all of the menu settings that I needed to view hidden files and write to system. Thanks for your help!
Click to expand...
Click to collapse
Great! It should all work for you now
more on keyboards with nook tablet
I've been both successful and unsuccessful with this technique, so there must be something about each individual keyboard that either allows it to work or prevents it from working. I have a rooted nook tablet, which I have set up to block B&N software updates.
I have been able to install the Hacker's Keyboard successfully. I have been able to install SlideIT so that I can choose it as an input keyboard, but it only causes Force Close repeatedly. I have been able to install Swiftkey X (preview version), and can use it, but it tells me that I need to complete the installation in order to be able to use all the features. (I don't know whether that means there is something I can do that I haven't done yet, or if it means I need to pay for the full version.) Finally, I have tried to install the Thumb Keyboard, but even when following the same process as I have with all the others, it does not even appear as a choice when I pull up the "select input method" screen.
Has anyone had any success with SlideIT or ThumbKeyboard on the nook tablet?
Thanks!
grubygreen said:
I've been both successful and unsuccessful with this technique, so there must be something about each individual keyboard that either allows it to work or prevents it from working. I have a rooted nook tablet, which I have set up to block B&N software updates.
I have been able to install the Hacker's Keyboard successfully. I have been able to install SlideIT so that I can choose it as an input keyboard, but it only causes Force Close repeatedly. I have been able to install Swiftkey X (preview version), and can use it, but it tells me that I need to complete the installation in order to be able to use all the features. (I don't know whether that means there is something I can do that I haven't done yet, or if it means I need to pay for the full version.) Finally, I have tried to install the Thumb Keyboard, but even when following the same process as I have with all the others, it does not even appear as a choice when I pull up the "select input method" screen.
Has anyone had any success with SlideIT or ThumbKeyboard on the nook tablet?
Thanks!
Click to expand...
Click to collapse
Some keyboards seem to require more effort than others. Read through this thread:
[Tutorial] Installing alternative Keyboards on the NT.
There is a lot of info in there, iirc I had to read through it myself a couple of times, but I was able to get Hacker's and Swype working. And others have gotten the other keyboards you mentioned working as well.
Also, another neat trick is to also install Keyboard Manager. I have it and it automatically switches from Swype (in portrait) to Hacker's (in landscape) when changing orientations. Very handy.
Ok, I've side-loaded a generic .APK file, into a sub-dir within the 1.0-GB
area. (Previously, I likewise side-loaded a movie file into this same area, and it plays great.)
As I read other posts asking this same type of question about procedures/rules
for installing side-loaded apps, I'm not yet clear on a few things, such as
whether I need to be 'rooted' to install them and whether I first need to
purchase/install separate SD-card and load such generic apps there instead.
My current state is:
(1) My Nook tablet is still at 1.4.0 (i.e. I have NOT yet received the 1.4.1
update that blocks installation of such APKs.)
(2) My NT is NOT yet rooted.
When I view/select the side-loaded generic app, see a red question-mark on the file, and tappin it, I get msg:
"This nook cannot read this file. It may be an unsupported format."
So, what should I try next, to allow this file-type of .APK to be
a supported type?
Is this your first non-B&N apk? If so, I believe you have to download and install at least one apk directly through the Tablet's browser to get the option changed to allow sideloaded apks.
CapsLockKey said:
Is this your first non-B&N apk? If so, I believe you have to download and install at least one apk directly through the Tablet's browser to get the option changed to allow sideloaded apks.
Click to expand...
Click to collapse
Well, it WAS my first non-B/N app.
So, I installed an app, one named 'Skitch', from the BN app store.
But, that makes no difference at all...my original side-loaded APK file
still gives the same error msg that I mentioned in the base post.
So, your 'belief' seems to be incorrect.
Anyone else know what to do, to install side-loaded .APK files?
[This issue could end up being one more nail in the coffin...if I don't resolve this,
I'll have to strongly consider returning this device, and waiting for a 'true' Android
tablet this spring, with newer, more main-stream code (e.g. 'Ice Cream Sandwich')
in it.]
Hi cookdav,
CapsLockKey is correct about needing to download an apk through the browser in order to do what you would like.
I noticed this yesterday after playing with my NT for the first time. When you download an apk through the browser you will see a notification in the lower left hand corner that it is complete. You have to launch the apk from this notification in order for the file to be correctly recognized.
When I went to my downloaded files and tried clicking the apk file I got the same message you are seeing. It seems to me that the BN overlay does not natively recognize the apk file format, but the code responsible for the notifications does.
You should then be able to follow the directions for enabling ADB. After that you can use adb to install any apk file you would like.
I hope this helps and that it was clear.
cookdav said:
Well, it WAS my first non-B/N app.
So, I installed an app, one named 'Skitch', from the BN app store.
But, that makes no difference at all...my original side-loaded APK file
still gives the same error msg that I mentioned in the base post.
So, your 'belief' seems to be incorrect.
in it.]
Click to expand...
Click to collapse
What does installing an app from the B&N app store have to do with side loading an app from the browser or email? Have you bothered to read the "how to side load apps thread?"
How you can fix your face to say "your 'belief' seems to be incorrect." when you aren't following instructions is funny as hell.
dkb218 said:
What does installing an app from the B&N app store have to do with side loading an app from the browser or email? Have you bothered to read the "how to side load apps thread?"
How you can fix your face to say "your 'belief' seems to be incorrect." when you aren't following instructions is funny as hell.
Click to expand...
Click to collapse
The operative word there is 'seems'.
And, yes, I did read that thread, but obviously now, I missed something.
I guess I missed the distinction, between installing an app via 'shop'
and installing an app via the browser. So, shoot me.
[That said, I'm still a bit confused. But, reading-between-the-lines has always
been problematic for some of us newbies.
I'll go back and re-read everything 3 times again,
and I'm sure that these distinctions will eventually become clear to me.]
Thanks for clarifying.
Ok, did one thru the browser, but still no-go...
Ok. I installed 'golauncher', via the browser.
Sigh. But, once again, after that, when I go back and try to install
the earlier-mentioned .APK, it still says what it has been saying all along.
Hmm..a new possibility has occurred to me: Maybe I'm so immersed in
Linux and Windows-XP and Win-7, that that has made me too stupid
to follow directions and learn this new 'tablet-way' of doing things.
[Whoever said "The devil is in the details" must have been an Android user.]
Clearly, I've STILL missed something, after re-reading. Anyone got
any more ideas/guesses of what I might still be missing?
"this nook cannot read this file" although I do sideload apks
I got a similar problem with Nook Tablet wit 1.4.0
I have managed to download an app so that my settings have been changed to accept those apps
If i go to another app market, I do install apps.
But for some reason I am limited (Amazon Apps refuses to work because I am not in the US and others have limitations which I dont understand, as on a chinese android pc they work, however)
SO I d like to install from sd card
And i get this message "this nook cannot read this file"
If I mail to gmail, in nook mail I cant open attachment (nor any others)
Any workaround?
Thanks
Agnes
cookdav said:
Ok. I installed 'golauncher', via the browser.
Sigh. But, once again, after that, when I go back and try to install
the earlier-mentioned .APK, it still says what it has been saying all along.
Hmm..a new possibility has occurred to me: Maybe I'm so immersed in
Linux and Windows-XP and Win-7, that that has made me too stupid
to follow directions and learn this new 'tablet-way' of doing things.
[Whoever said "The devil is in the details" must have been an Android user.]
Clearly, I've STILL missed something, after re-reading. Anyone got
any more ideas/guesses of what I might still be missing?
Click to expand...
Click to collapse
I don't think you can install apk's through the native file browser. You will need a different file browser to install your apk's.
if you are downloading directly from the internet browser, then the installation process is the same as installing the tgps launcher or in your case go launcher.
However, if you are sideloading your apk's through something like dropbox or an sd card, you will need a file browser.
I recommend Root Explorer (paid), but if you need a free one you can download es file explorer.
es file explorer can be found in the must have apps thread located in the themes and apps section of the NT forums. Just go to that page on your NT internet browser and click the download link. You will be redirected to a download page, and there should be something that says "remove this frame". Tap on that and your download should start.
hope this helps
I have an older version Player Pro(2.2).When I try to upgrade it to the latest version using another .apk file of version 2.3,it gives this error“Parse Error : There is a problem parsing the package”.I cannot update it from the android market as I have not purchased the app.Any idea why is this happening?
i get this same error with other apps i try to install...particularly when i know the app isnt for my device....ima google it
I don't think a site made for developers will want to help you fix a problem with a pirated app. If you really like it that much, buy it, it's not like it costs a fortune. I bought it and never had any problem updating from the market.
Sent from my wi-fi toaster.
I'm trying to find a fix for the same thing. But mine is not a pirated app it is an app from a tab I have and a couple off apps that came with it I can't find on the market or anything that works like them I waisted a lot of money trying to find one and thought this is just pointless. I tried resigning the APK but no go any ideas?
This errors occurs when the apk is built with different API level than API level your phone supports. Ex: If your phone is having Gingerbread (2.3.*) and your app is compiled for tablets (honeycomb), you see this error.
cnu4u said:
This errors occurs when the apk is built with different API level than API level your phone supports. Ex: If your phone is having Gingerbread (2.3.*) and your app is compiled for tablets (honeycomb), you see this error.
Click to expand...
Click to collapse
both are 4.0 ICS
cnu4u said:
This errors occurs when the apk is built with different API level than API level your phone supports. Ex: If your phone is having Gingerbread (2.3.*) and your app is compiled for tablets (honeycomb), you see this error.
Click to expand...
Click to collapse
I am getting this problem with some of my apps which I backup using an application to the sdcard. There should be a fix for this.
nice
ri123 said:
I am getting this problem with some of my apps which I backup using an application to the sdcard. There should be a fix for this.
Click to expand...
Click to collapse
great job
ri123 said:
I am getting this problem with some of my apps which I backup using an application to the sdcard. There should be a fix for this.
Click to expand...
Click to collapse
Make sure the app has the correct amount of information, for example, an app with 0 bytes would not work, which has happened before when a file is not created properly.
Sent from my HTC Explorer A310e using XDA
ri123 said:
Make sure the app has the correct amount of information, for example, an app with 0 bytes would not work, which has happened before when a file is not created properly.
Sent from my HTC Explorer A310e using XDA
Click to expand...
Click to collapse
i tryed tu change xml in akp, i used apktool, i decompiled it, changed version to my current (2.3.7 cyanogenmod ) and then compiled it back, it is not 0 byte, but head the same error, i thought i have done something wrong, but today i tryed restor apk with titanium backup, but the same
i dont understand, is this error coz of version mismach? or ???
P.S. this is my first post on xda wish me luck )
I also have this problem with an app that is called Wavesink Trial (Usb Dab Radio app)
I want this to work for my car player that has Android 2.3.4 but the Wavesink only works for Android 3.0 and above.
I tried to change the Androidmanifest.xml minSdkVersion value to 8 (which is for Froyo) so it should be able to run on my car player.
I even sent a mail to the developer which said it could'nt be possible as Android 2.3.4. doesn't have Usb Host mode, but i guess it has since the carplayer has support for Usb Wifi adapter aswell as memorysticks.
Anyone have a solution.
btw, i decompiled the app, edited the manifest, recompiled the app and signed it again.
Dragonlove said:
I also have this problem with an app that is called Wavesink Trial (Usb Dab Radio app)
I want this to work for my car player that has Android 2.3.4 but the Wavesink only works for Android 3.0 and above.
I tried to change the Androidmanifest.xml minSdkVersion value to 8 (which is for Froyo) so it should be able to run on my car player.
I even sent a mail to the developer which said it could'nt be possible as Android 2.3.4. doesn't have Usb Host mode, but i guess it has since the carplayer has support for Usb Wifi adapter aswell as memorysticks.
Anyone have a solution.
btw, i decompiled the app, edited the manifest, recompiled the app and signed it again.
Click to expand...
Click to collapse
I'm also having the same problem. I've downloaded all versions and not one of them will install and the deck is rooted.
phase error
ricky1001 said:
I have an older version Player Pro(2.2).When I try to upgrade it to the latest version using another .apk file of version 2.3,it gives this error“Parse Error : There is a problem parsing the package”.I cannot update it from the android market as I have not purchased the app.Any idea why is this happening?
Click to expand...
Click to collapse
If you get a “ Parse Error: There is a
problem parsing the package ”
message when trying to install an
APK, it could be due to different
reasons, but the most 2 common
ones are as below:
The APK file you’re trying to to
install is corrupted. That might
be due to an error when
downloading (such as the
connection getting lost) or the
APK being already broken before
you download it. Try
downloading the file again,
preferably from another location.
If possible, use trusted websites
such as SlideME or Mobango
where the APK are tested
beforehand.
If that doesn’t fix it, it’s probably
because the Android version on
your device is below the
requirements of the app. For
instance, you’re trying to install
an app that requires Android 4.1
and higher on a device running
Android 2.3. To see which
Android version your device is
running, go to Settings, then
About Phone and look at the
number next to Android Version
(or Firmware Version). Unless
you can update the system
(check that by going to Settings ,
About phone , then System
Updates ), you won’t be able to
do much about that. To avoid
situations like this, always check
before downloading that the
requirements of the app are in
line with your device. Good app
stores like SlideMe or Amazon
always provide the minimum
Android version which is needed.
ricky1001 said:
I have an older version Player Pro(2.2).When I try to upgrade it to the latest version using another .apk file of version 2.3,it gives this error“Parse Error : There is a problem parsing the package”.I cannot update it from the android market as I have not purchased the app.Any idea why is this happening?
Click to expand...
Click to collapse
hey juz check if ur sd is protected with password or something. and its the reason y its showing... if sd is protected under developer options & phone is rooted it occurs. check that out n try and tht prob will be solved..it worked for me. check that out n reply.
I fixed my P780 with the parsing error
xx
anish.2010 said:
hey juz check if ur sd is protected with password or something. and its the reason y its showing... if sd is protected under developer options & phone is rooted it occurs. check that out n try and tht prob will be solved..it worked for me. check that out n reply.
Click to expand...
Click to collapse
hey anish.2010 i have the same problem.my phone is rooted.what can i do now?
If this occurs on Marshmallow, go to settings>apps. Tap the three dot menu and tap "show system." Scroll down and look for "Package installer." Click permissions and make sure storage is on(the circle is to the right of the oval). If not on, that permission can cause this error. Hope it helps.:good:
if you have any problems about X431 ，please contact me !!!
we specialize in Launch X431 ,including X431 V Plus/Pro3,X431 V/Pro,easydiag ,easydiag software update......and so on.
Email: [email protected]
Ikeb0mb said:
If this occurs on Marshmallow, go to settings>apps. Tap the three dot menu and tap "show system." Scroll down and look for "Package installer." Click permissions and make sure storage is on(the circle is to the right of the oval). If not on, that permission can cause this error. Hope it helps.:good:
Click to expand...
Click to collapse
IT DID HELP ME!
Thank you very much, pal.
But I didn't know why the permission is toggle off automatically. This problem did disturb me a lot and it has been solved by your tips.
ruolian said:
IT DID HELP ME!
Thank you very much, pal.
But I didn't know why the permission is toggle off automatically. This problem did disturb me a lot and it has been solved by your tips.
Click to expand...
Click to collapse
N.P. happy to help. My phone did the same thing and I went poking around and found that out. Sometimes it resets after an update( like flashing a new cm version), so if you update just make sure you check