Ota fail - Motorola Photon 4G

I am rooted and running 45.3.5 build 198_5, phone detects and downloads ota but during installation it fails, any advice?

Harry_Spade said:
I am rooted and running 45.3.5 build 198_5, phone detects and downloads ota but during installation it fails, any advice?
Click to expand...
Click to collapse
There are many other posts on this. However, I will try to help. At what point does it get to before it errors out? Is it at the Android guy with progress bar then an exclamation mark, a reboot, and then message saying it failed? Please give more info.

Yup it starts out with the open box ti show peogress and then goes to exclamation mark, reboots say update failed, i am rooted trying to go to 4.3.6 build 198_6 from 4.3.5 build 198_5

Harry_Spade said:
Yup it starts out with the open box ti show peogress and then goes to exclamation mark, reboots say update failed, i am rooted trying to go to 4.3.6 build 198_6 from 4.3.5 build 198_5
Click to expand...
Click to collapse
Ok...most likely it is failing the MD5 check. Have you removed any apps? When it gets to the Android guy and progress bar hold down both volume buttons at same time and it will tell you what is causing the issue. If it shows an apk in the error than it either can't find or verify the app. Post back to get more help if needed.

The webtop hdmi hack breaks the upgrade. If you've done that move the original .apk and .odex files back and it will upgrade.
Been there, had it happen to me.
Swyped on my Nook color using Tapatalk Pro

I am not getting the OTA. I am still on 4.2.7. Guess I need to get it from Yay...he is the man!

New issue, now when i try to do a update, it says device is up to date, wtf...
Did not use webtop, I used the torpedo method for root, did not remove any apps, i dont know whats going on....

Harry_Spade said:
New issue, now when i try to do a update, it says device is up to date, wtf...
Did not use webtop, I used the torpedo method for root, did not remove any apps, i dont know whats going on....
Click to expand...
Click to collapse
I'm on 4.2.7 locked and unrooted. (4.2.7 OTA unrooted me, and haven't bothered to root again).
I get the same "up to date" message. With past OTA's, it takes a few days sometime before you can manually find and do it. Don't worry.

willysp said:
I'm on 4.2.7 locked and unrooted. (4.2.7 OTA unrooted me, and haven't bothered to root again).
I get the same "up to date" message. With past OTA's, it takes a few days sometime before you can manually find and do it. Don't worry.
Click to expand...
Click to collapse
That's because your phone is up to date lol. There isnt a build newer than yours...at least not that i know of.

my2cents said:
I am not getting the OTA. I am still on 4.2.7. Guess I need to get it from Yay...he is the man!
Click to expand...
Click to collapse
What up date are you guys talking about? o_0

kennypow3rs said:
What up date are you guys talking about? o_0
Click to expand...
Click to collapse
45.2.7 = 4.5.1A-1_SUN-154_6 (see here)

kennypow3rs said:
That's because your phone is up to date lol. There isnt a build newer than yours...at least not that i know of.
Click to expand...
Click to collapse
Ooops!
My bad - I briefly saw a mention last night of an update for Gtalk video and assumed it was released. I read more carefully today - just a leak, so will look for an OTA in a couple weeks!

Not true, last night i did manual update from my phone and it foind one, 4.3.6 build 198_6 i am on 4.3.5 build 198_5 right now, the update kept failing and when i try to scan for one toda it says phone up to date i dont whats going on:/

Related

Really need some help here

This is my 2nd post now. Didnt get any answers on my other one. So this is the deal, i got my phone on factory .26 and used gladroot to get to .52 with my root.
Everything has been find now the new update came out .83. I try to dl and install it from my phone and it reboots on install and the green android guy and an explamation point pop up. I have to restart after that and the phone is back to normal but with no update.
Can i have detailed instructions on how to update and get the root again?
Do i have to flash? and how do i go about doing that? please give me insight. THanks
wishb0n3 said:
This is my 2nd post now. Didnt get any answers on my other one. So this is the deal, i got my phone on factory .26 and used gladroot to get to .52 with my root.
Everything has been find now the new update came out .83. I try to dl and install it from my phone and it reboots on install and the green android guy and an explamation point pop up. I have to restart after that and the phone is back to normal but with no update.
Can i have detailed instructions on how to update and get the root again?
Do i have to flash? and how do i go about doing that? please give me insight. THanks
Click to expand...
Click to collapse
umm its normal for it to show the android guy with the ! with int he triangle. jsut let it install and get root again with ginger break. let it finish do not interrupt it while it is updating. let it reboot by it self.
There are numerous threads in development that tell you how to flash to the 1.57 sbf file. Then I went to the motorola website and did the update to 1.83 from there.
Sent from my MB860 using XDA Premium App
sal2708 said:
umm its normal for it to show the android guy with the ! with int he triangle. jsut let it install and get root again with ginger break. let it finish do not interrupt it while it is updating. let it reboot by it self.
Click to expand...
Click to collapse
So its normal it just sits and android and !?? it doesnt show a progress bar or anything.. so just leave it ? i have been looking how to flash but im not really understanding it.. do i have to flash back or what?
Ok so i showed a progress bar for a couple seconds, now its at a triangle with ! in it and the green android guy. So you are telling me this is normal? I should just leave my phone like this? it will finish on my own? or what? please let me know thanks alot.
i guess ill give it 5 minutes.. no progress yet.. please let me know if this is normal or its not going to update?
wishb0n3 said:
Ok so i showed a progress bar for a couple seconds, now its at a triangle with ! in it and the green android guy. So you are telling me this is normal? I should just leave my phone like this? it will finish on my own? or what? please let me know thanks alot.
Click to expand...
Click to collapse
when i did the update on my with the .zip file that was floating around i just flashed it, anf it had the android guy with the ! int he traingle.
it was showing ******************************** as it updated. then eventually just rebooted and went on to the motorola with dual core boot image. let it there for a while and see what happenes
sal2708 said:
when i did the update on my with the .zip file that was floating around i just flashed it, anf it had the android guy with the ! int he traingle.
it was showing ******************************** as it updated. then eventually just rebooted and went on to the motorola with dual core boot image. let it there for a while and see what happenes
Click to expand...
Click to collapse
The thing is i rooted my atrix sraight from factory to .52. So im rooted on .52 right now with gladroot.. Im trying to update straight from my phone to the new update.. without flashing or antyhing. I download it and install it.. it showed a open box with a bar for 2 seconds and went to the triangle and green guy. Hasnt moved or done antyhing since.. there is no *************** etc... any advice?
wishb0n3 said:
The thing is i rooted my atrix sraight from factory to .52. So im rooted on .52 right now with gladroot.. Im trying to update straight from my phone to the new update.. without flashing or antyhing. I download it and install it.. it showed a open box with a bar for 2 seconds and went to the triangle and green guy. Hasnt moved or done antyhing since.. there is no *************** etc... any advice?
Click to expand...
Click to collapse
funny. mine updated. alright then lets do this the hard wa
Well, still nothing its not updating.. just stuck at the !triangle green android guy screen... can anyone tell me what to do so i can upgrade to .83? much appreciated..
Ok emailed you and all.
Got a question, do i have to flash it back? i had trouble flashing last time if anyone can guide me through it, if its needed. Will be very grateful once im on the update and rooted. Coming from iphone so this is all foreign to me lol.
use this guide to get back to 1.2.6 then ota to 57 then ota to 82 then use gingerbrick to root
sal2708 said:
umm its normal for it to show the android guy with the ! with int he triangle. jsut let it install and get root again with ginger break. let it finish do not interrupt it while it is updating. let it reboot by it self.
Click to expand...
Click to collapse
No it's not!
The triangle an "!" mean it's crapped out!
CaelanT said:
No it's not!
The triangle an "!" mean it's crapped out!
Click to expand...
Click to collapse
have you tried accessing the android recovery? its there, tis also there when you are doing a upgrade, its normal for it to show up when your doing and upgrade in any android device!
I had the same problem. I ended up downloading the update frontiers the.motorola websiteand istalling it from my pc. Took 30 min but it worked. I was rooted on 1.57. Lost root but got it back with gingerbreak
Sent from my MB860 using XDA Premium App
SolidHelix said:
I had the same problem. I ended up downloading the update frontiers the.motorola websiteand istalling it from my pc. Took 30 min but it worked. I was rooted on 1.57. Lost root but got it back with gingerbreak
Sent from my MB860 using XDA Premium App
Click to expand...
Click to collapse
Whats the website man? ill try it out.. the way you wrote it doesnt add up lol
Ok.. well i did what you said. i went to the motorola website.. updateded my phone took about a half hour.. phone restarted and all then it said update failed or something. But i look and it says its updated... so is it all good? do i have to use gingerbreak now?

[Q] Haven't got the 1.83 update yet. Is my phone working okay?

I'm still not getting the 1.8.3 update. When I check, it says "Check for update was not available at this time. Try again later."
Is this normal, because they're still doling it out? Or is there a problem?
The message makes it sound like the update service itself was not found, not that there was no update found.
I haven't done anything more radical than root my phone, so I wouldn't think there would be an issue.
If you don't get an OTA notification try this:
http://forum.xda-developers.com/showthread.php?t=1061292
Haphim said:
I'm still not getting the 1.8.3 update. When I check, it says "Check for update was not available at this time. Try again later."
Is this normal, because they're still doling it out? Or is there a problem?
The message makes it sound like the update service itself was not found, not that there was no update found.
I haven't done anything more radical than root my phone, so I wouldn't think there would be an issue.
Click to expand...
Click to collapse
I'm assuming your did this over wifi. If not, try over wifi.
Sent from my MB860 using Tapatalk
jjwatmyself said:
I'm assuming your did this over wifi. If not, try over wifi.
Click to expand...
Click to collapse
I know I need wifi to download the update, but I didn't think I needed it to *check* the update.
But can someone confirm that the message I received is standard to no update being available, rather than the update *service* not being available?
Normal message is:
Your device is up to date.
No update is necessary at this time.
OK (button)
CaelanT said:
Normal message is:
Your device is up to date.
No update is necessary at this time.
OK (button)
Click to expand...
Click to collapse
You certainly ate right on that. I updated with RDS Lite as was sick of waiting too.
Sent from my MB860 using Tapatalk
CaelanT said:
Normal message is:
Your device is up to date.
No update is necessary at this time.
OK (button)
Click to expand...
Click to collapse
Okay, then what does it mean that I keep getting "Check for update was not available at this time. Try again later."?

[Q] Rooted T-Bolt downloaded OTA update while sleeping

Ok, so last night my phone downloaded the update (guessing Gingerbread). I'm still running 2.2.1 on my Thunderbolt, as I was out of the country for the past few months. I caught the phone before it completed the installation and thought that if I removed the PG05IMG.zip file from the sd card, that would prevent it from being able to install the update. I turned the phone back on and it began to attempt to install the update again. I would like to flash a new ROM to the phone (as I was simply rooted without a custom ROM before) so that I am running 2.3+ but I don't want to have to re-root the phone. I would like to be able to back everything up before I flash a new ROM. How do I prevent the phone from installing the OTA update that was inadvertently downloaded last night , which will unroot my phone??
Please help! Thank you
Not sure if you can stop it at this point and since the phone can still be rooted with the GB update, it may just be easiest to let it go.
Otherwise, if you really want to stop the update, you probably need to boot into Fastboot and find the files that are part of the update. From my Eris days, the OTA update isn't packaged up in the PG05IMG.zip file that you removed. I'm not sure where the files are or what files are the ones you need to delete though...
Someone fee free to correct me, but if you flash the CWM recovery it will prevent the update from happening?
Essentially, I just use the phone for wireless tether, so that's mainly why I root. Doubt that changes much of anything...
hallstevenson said:
Not sure if you can stop it at this point and since the phone can still be rooted with the GB update, it may just be easiest to let it go.
Otherwise, if you really want to stop the update, you probably need to boot into Fastboot and find the files that are part of the update. From my Eris days, the OTA update isn't packaged up in the PG05IMG.zip file that you removed. I'm not sure where the files are or what files are the ones you need to delete though...
Click to expand...
Click to collapse
So I tried to let the update take, but unfortunately it gets stuck at the screen with Andy and the exclamation point!!
Ughhh.... help! Now I have no workable phone..
Can you still boot into recovery? I had read that clearing cache and dalvik fixes this...
jv
tomgillotti said:
So I tried to let the update take, but unfortunately it gets stuck at the screen with Andy and the exclamation point!!
Ughhh.... help! Now I have no workable phone..
Click to expand...
Click to collapse
That's a common problem as I recall from a few weeks back. I saw threads about it but never read them as I wasn't affected. I don't know if it's a dead-end or easily fixed or complicated to fix...
Sent from my ADR6400L using XDA App
johnnyv5 said:
Can you still boot into recovery? I had read that clearing cache and dalvik fixes this...
jv
Click to expand...
Click to collapse
I stumbled into clockwork recovery earlier... I will see what I can accomplish if I can make it back there!
Side note.. I can get into the phone for a minute or so before it restarts again.
tomgillotti said:
I stumbled into clockwork recovery earlier... I will see what I can accomplish if I can make it back there!
Side note.. I can get into the phone for a minute or so before it restarts again.
Click to expand...
Click to collapse
johnnyv5 said:
Can you still boot into recovery? I had read that clearing cache and dalvik fixes this...
jv
Click to expand...
Click to collapse
Two thumbs up! So far, so good as for this recommendation. Thank you!!!
Any thoughts on how to prevent VZW from pushing this update from now on?
Also need the best 2.3+ ROM... or is CM9 with 4.0 on the way??
Thread moved to Q & A
tomgillotti said:
Any thoughts on how to prevent VZW from pushing this update from now on?
Click to expand...
Click to collapse
Install a non-stock ROM. Don't worry, you can get Sense-based ones that won't be anything "new".
It appears that VZW will eventually force the update so there's no way that I'm aware of to stop it while running stock (even rooted stock).
tomgillotti said:
Two thumbs up! So far, so good as for this recommendation. Thank you!!!
Any thoughts on how to prevent VZW from pushing this update from now on?
Also need the best 2.3+ ROM... or is CM9 with 4.0 on the way??
Click to expand...
Click to collapse
Flash a ROM that has the update. There are a few around here that are 2.11.605.5 that you flash in Recovery so that it'll stop bugging you to update. Just pick one that is already rooted. You can do a backup of your currrent rom, flash the 2.11.605.5 then restore your data and your all set....
jv
There are a couple threads on preventing ota updates. A quick search will tell you what file to rename and how to.
Sent from my infected thunderbolt.

update!!

JUST to let everyone know, i've recieved notification for the update, i've got 3 choices reject, defer, and ok. so which should i choose.?????
???
lucky duck
if it were me, i would accept and try the exploit. but its not a guarantee that it would work
EDIT:
I just got the OTA, i am downloading now... i dont mind being a guinea pig
Aldo101t said:
JUST to let everyone know, i've recieved notification for the update, i've got 3 choices reject, defer, and ok. so which should i choose.?????
???
Click to expand...
Click to collapse
I just got the update. I think I'm going to do it and see if it works.
icedragon59 said:
i just got the update. I think i'm going to do it and see if it works.
Click to expand...
Click to collapse
good luck to all
For future reference, you can download it and then choose not to install it. It can be downloaded over Wi-Fi, or uses background mobile data but doesn't display the icon.
EDIT:
It took 11 minutes to install, and now I'm Android 4.0.4 and Sense 4.1. I can't find how to change the Recent Apps button to a Menu button. I'm slightly upset about that.
Now on to attempting root!
IceDragon59 said:
For future reference, you can download it and then choose not to install it. It can be downloaded over Wi-Fi, or uses background mobile data but doesn't display the icon.
Click to expand...
Click to collapse
Is that the "Defer" option, or "Yes", then choose to not install?
Once it downloads I would expect a constant nag to install until you do.
junkmail9 said:
Is that the "Defer" option, or "Yes", then choose to not install?
Once it downloads I would expect a constant nag to install until you do.
Click to expand...
Click to collapse
First "OK" to download update, then "Defer" to not install it once it has downloaded. And yeah, you'll probably get constant nags.
IceDragon59 said:
For future reference, you can download it and then choose not to install it. It can be downloaded over Wi-Fi, or uses background mobile data but doesn't display the icon.
EDIT:
It took 11 minutes to install, and now I'm Android 4.0.4 and Sense 4.1. I can't find how to change the Recent Apps button to a Menu button. I'm slightly upset about that.
Now on to attempting root!
Click to expand...
Click to collapse
I believe the Menu button change is the 3-button Mod that you can install once rooted.
Good luck on the root attempt! Please let us know how it goes.
so can we not use this exploit unless we have downloaded the newest update?
IceDragon59 said:
For future reference, you can download it and then choose not to install it. It can be downloaded over Wi-Fi, or uses background mobile data but doesn't display the icon.
EDIT:
It took 11 minutes to install, and now I'm Android 4.0.4 and Sense 4.1. I can't find how to change the Recent Apps button to a Menu button. I'm slightly upset about that.
Now on to attempting root!
Click to expand...
Click to collapse
Unlike the sense 4.1 updates for one series and EVO LTE, ours does not bring the key remappingoption to settings...those updates changed display & gestures to display, gestures, & buttons...and the option is in there for those users
Got the update but unlike others, mine just downloaded and installed without asking me permission! I was in my car and needed to make a call too! Argh. But at least it seems to have installed OK.
Any idea if this update is available for download on VZW's website somewhere? I am having trouble with the OTA update.
I got the update too...no notice, it just d/l'd and installed without options. What's the new icon in the status bar (left of the wifi)?
Caught mine just before it installed the update and yanked my battery. Every time I boot it back up it tries to install the update. Any ideas on how to get it to clear the update? Don't want to update til we know more about what this might mean for the possibility of S-OFF or root with the current h-boot.
it downloaded mine and i defered it, but where does it download to, i can't find it.
Aldo101t said:
it downloaded mine and i defered it, but where does it download to, i can't find it.
Click to expand...
Click to collapse
Probably /cache or /cache/fota
You can't get there without root.
junkmail9 said:
Probably /cache or /cache/fota
You can't get there without root.
Click to expand...
Click to collapse
that figures
junkmail9 said:
Probably /cache or /cache/fota
You can't get there without root.
Click to expand...
Click to collapse
I'm rooted and it says error flashing zip. *confused*
SOB it keeps trying to install even after i defered it, WTF
I TRIED DEFERING AGAIN i got unfortunatly htcdm has stopped????????????
Its mandatory right

Firmware E97020j Download - This is JellyBean!

This firmware file takes you straight to JellBean on LGE970. There is no need to do the OTA if you flash this.
http://downloads.codefi.re/g33k3r/LGE970AT-01-V20j-310-410-MAR-08-2013.zip
Thanks,
G33k3r
g33k3r said:
Everyone was looking for it, so here it is.
https://mega.co.nz/#!HwJhmAbR!VnIAQ3pOyw48Q0ALMDXCZ3vosGwEzpq4KsvUM2Vt_co
Thanks,
G33k3r
Click to expand...
Click to collapse
how long you been holding on to this
MysteryEmotionz said:
how long you been holding on to this
Click to expand...
Click to collapse
Haha, no one needed it since you couldn't root while on 11c so I just kept it tucked away. :laugh:
g33k3r said:
Haha, no one needed it since you couldn't root while on 11c so I just kept it tucked away. :laugh:
Click to expand...
Click to collapse
ive been looking for it since the day i joined the lgog community. everyone kept saying it didnt exist
MysteryEmotionz said:
ive been looking for it since the day i joined the lgog community. everyone kept saying it didnt exist
Click to expand...
Click to collapse
HA!! I wish I knew. Well at least it's here now.
g33k3r said:
HA!! I wish I knew. Well at least it's here now.
Click to expand...
Click to collapse
yup im dling now to add to my own archives. now go get your hands on 20j
g33k3r said:
Haha, no one needed it since you couldn't root while on 11c so I just kept it tucked away. :laugh:
Click to expand...
Click to collapse
HE HELD IT FROM US!
Thanks man. Looks like we're all gonna get the JB update no problem now.
when I installed LGNPST i get this error LG USB/Parrell dongle not detected, Im using tsilenzos automated lgnpst is that the right one. if not can osmeone upload a correct version or a link. Thanks!
Re: Firmware E97011c Download - Needed for JB Update
Thanks I thought I had this before but had wrong version... Such a long download though I will try and have Snowleps JB hold me off till something flash able comes by.
Sent from my LG-E970 using Tapatalk 2
Re: Firmware E97011c Download - Needed for JB Update
dalekinder said:
when I installed LGNPST i get this error LG USB/Parrell dongle not detected, Im using tsilenzos automated lgnpst is that the right one. if not can osmeone upload a correct version or a link. Thanks!
Click to expand...
Click to collapse
Reinstall it. I had that error once because the download didn't complete
Sent from my LG-E970 using xda premium
just wanted to add another confirmation that LGNPST'ing to the 11c in this thread does indeed let you get the JB update. it gave me the update option on the first try.
freebee269 said:
just wanted to add another confirmation that LGNPST'ing to the 11c in this thread does indeed let you get the JB update. it gave me the update option on the first try.
Click to expand...
Click to collapse
Exactly , the update popped up instantly when i booted the phone. Problem. you cant root!
Finally!!! After re-locking, un-rooting, and still getting errors, this worked. Thanks.
Okay, after going to 10o and nothing, plus getting a soft brick because I re-rooted, then LGNPSTing again to 11c, I still do not get an update! Now the phone says wait another 43hours to try again. What's going on? I am at home on WiFi and my AT&T Microcell.
So I am making an attempt to LGNPST to the linked firmware and it seems to be stuck at 2%? I have only used it once before and that was some time ago and it seemed to go much faster. It has been stuck for 13 min
EDIT I had a bad download got it to flash with the new download.
Could somebody post the md5 of the file from mega? *EDIT* nvm. I finally got mine working. If anybody else is interested, my md5 is 4d6bc49a7d4ab865c7bf55ea6fb4963a
:crying: back to 11c but not jb update:crying::crying::crying:
I have the program. The program does not recognize my phone. It shows up as unkown with no info filled in. I tried running the program as admin,regular and even tried to restart my computer and no luck. I installed LG drivers 3 times.I have the Bin file. I found the DLL for e970. I tried selecting the bin from lgnspt no luck. Only one shows up. I tried putting my phone in download mode and selecting the DLL from the file tab and the main one where you select your bin to and no luck,still just the original DLL shows up. I tried selecting the original DLL and the BIN I download and it tells me all of my phone data will be erased. So im like oh hell naw not just to get jelly bean on my phone and come to you guys for help. What should I do,this is some serious trail and error. BTW i have to now wait 130 hours before I can try again and I adjusted the clock multiple times which is why that has happened.
Argh. My 11c ota failed on Monday (I must have pocket-initiated it and I wasn't ready). Kind of annoying that it won't retry.
I still have the dlpkgfile from that update but I'm not sure if it's complete. And I'm not sure if this: http://forum.xda-developers.com/showthread.php?t=1803090 will work with our phone either. Anyone have the dlpkgfile and can verify the size/md5 and/or the method to apply it?
Stupid questions that a lot of us are going to have: I am rooted but never unlocked the bootloader and would prefer not to at this point. If I LGNPST this file what is the effect on my phone? i.e. what gets reverted to stock and what stays as I had it? Will it un-root, and if so, can I use OTA rootkeeper to reapply root on 11c, or should I re-root the original way?

Categories

Resources