Here You Go! (please excuse the smudgy screen!):
The Sony Tablet S Premium Leather Case at £69.99 here in the UK. You use it in 2 comfortable fold out Stands for either typing or movie playback etc. In the box you get the case, 5 spare gels for the top of the tablet and 4 peices of Velcro (you only need 2 peices of Velcro to secure the Tablet in Place. The Stitching and leather is of very high quality. The Top Curved area (that covers the thick end of the tablet is of a matte finish, feels like a tough rubberised material and is very good to grip (non slippy)
Pros:
Very High Quality Finish and Stitching.
Excellent for use as a stand for media use.
Excellent for Typing on a desk or your lap.
You don't have to take the Tablet out of the Case to use/recharge in the cradle.
Hole cut out for the Camera.
Plastic area for IR Remote to work.
Easy to use/Grip when case is folded open when using in your hand.
Cons:
Adds a lot of weight to the device at 250grams making a total of 848 grams (makes it feel as heavy as the iPad 1) Some people might opt for the standard case which is slightly lighter at 215 grams.
Can be a faff to get out of the case, the adhesive on the gels is that strong you feel like you are going to rip the Tablet apart if say you want to use the tablet around the house without the extra weight.
It would have been nice if the top of the Tablet was slightly magnetic and the case flap tip was also magnetic for that extra bit of surety that it will stay shut (I cant say i have had a problem where the flap has flung open yet.)
The Case feels and looks like a premium product:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
You find the 2 raised bits of padding do a good job of automatically cleaning the parts of the screen they are touching when the case is closed, but obviously the middle strip wont be clean!!:
This is really sturdy and hardly any spring when typing whether its on your lap or on a table:
The Back of the case with a cut out for the rear camera:
A plastic panel to allow the IR Remote to work even when in the case:
Tablet S Stood rigid for movie/music/photo play back:
You have to leave on 2 strips of Velcro so the Tablet will stay in the case, also the 2 gels at the top of the case are sticky and very very secure:
The Tablet S sits comfortably in the official cradle even when in the case:
Thanks for the details and pics. Greatly appreciated. Now that I'm more informed, I think I'll pass and cancel my order for one. I really like using the device naked and don't want to sacrifice the ease of doing so. *sigh* The unique form factor really limits the availability of generic covers (not slip cases).
Looks pretty nice, other than that bloody velcro
What is the model number of this case - i went to a sony centre today and they had a similar official case for £90 or so. I didn't even ask for it to be taken off the shelf as i thought it was to expensive. they said no other models were available yet. Now i wonder if it is the same model but at a premium price for some reason. Confused
Sent from my Sony Tablet S using Tapatalk
Y I dont see this case in the sony website? I only find the STM slim case... is it similar to the one u have?
http://store.sony.com/webapp/wcs/st...oductId=8198552921666383166#additionalImage1"
3vilhomer said:
Y I dont see this case in the sony website? I only find the STM slim case... is it similar to the one u have?
http://store.sony.com/webapp/wcs/st...oductId=8198552921666383166#additionalImage1"
Click to expand...
Click to collapse
That cover is only available through Sony UK. Adorama.com has it listed as backordered.
The case i bought from the sony centre sheffield store in the UK is the SGPCV1/B, however its not on sonys website anymore for some reason.
Just bought the tablet from Sony shop, I got this case. I can confirm from Sony this case was around £90 and unfortunately not £69.99 like quoted by OP. Very high quality, bit fiddley to put together (the adhesive velcro stuff) but very useful
Just ordered mine from john lewis, its £40 in the clearance sale
Related
I found this little gem for $3.21 on Amazon. The dimensions looked good, I know CaseCrown makes a solid product and for less than $10 with shipping it was worth a try. In my opinion it's very nice fit, quality build and looks a helluva lot better than your average black messenger case.
Here's the link if anyone wants to grab one
Instead of just saying "yah it's nice!" I wanted to post some pics and a little review for those interested. Some of the pics aren't the greatest but they still get the idea across. I'm still waiting for my dock to arrive and once it does I'll update this post accordingly.
My needs: I carry my tablet daily and actually do use it for work. Up until now I had been using a very solid neoprene sleeve from BUILT NY (10" hardback "hoodie") but it wasn't terribly convenient to carry or open and remove the tab on the fly. I needed a case that would protect my tablet, allow me to carry a few smaller items (phone, memory wallet, etc) but still gave me easy access to the tablet with as little bulk as possible.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
The Fit: The tablet slips in the case nicely without the corners or sides rubbing against the zipper. Overall It's a comfortable fit, not overly snug like forcing it into an iThing case nor is the tablet flopping around inside while I walk. Like most laptop and netbook cases there are elastic straps on the bottom corners and vinyl straps on the top corners for holding the base and the screen in place. The tablet slips under the elastic ones just fine, hopefully with the dock in place it will be a snug fit. I don't plan on getting a folio but there does seem to be enough room to accommidate one if you just wanted a slim carrying case for your folio'd tablet.
There is an odd little padded "flap" along the seam that must serve some purpose for the device this was designed for. I fold it down over the screen for the extra bit of protection. Folding it under the tab does prop it up by a few degrees but doesn't really improve the view of the screen.
The front pouch accomidates my phone (Evo with an Otterbox Commuter case), memory card wallet, keys and a pack of gum pretty well. The Transformer's charging brick does fit but it distends the vinyl to a point where I think it would leave a permanent imprint over time. I haven't tried it yet but the pouch looks big enough to hold a 7" tablet if you really wanted to geek out.
The Quality: CaseCrown makes a solid bag. I've owned two of their products in the past and both times I was quite happy with the build quality for the price. The stitching isn't frayed or loose (no dangly ends or loose threads) and the material itself doesn't feel cheap or chintzy. The zipper pulls, strap rings and buckles on the shoulder strap are metal so I'm not worried about something wearing out or suddenly snapping.
The memory foam padding is a few mm thick and absorbs daily bumps and dings well. I wouldn't toss it out a window or anything but if I happened to drop it on concrete or marble I wouldn't be concerned with the survival of the contents. The front pouch has a thinner layer of padding inside the flap; it's enough to be there but not enough to add any bulk. Assuming you don't put anything too fragile in the pouch it should be enough.
The strap is just over 1" wide and feels like the same webbing they use to make seatbelts. There is an adjustable shoulder pad on the strap but so far the case is light enough that the pad becomes an annoyance. As I mentioned before the buckles and adjusters are metal and feel very solid. I prefer to have messengers like this land just below my hip bone but with the strap at maximum length it lands directly on my hip (6'2" 160lbs, for a frame of reference).
I think the big downside to this is the vinyl outside. It feels thick and looks good but if you manage to puncture or cut it you'll have a permanent hole in your case (short of some E-6000 and a patch kit) which could lead to problems down the road.
The Overall: If this is the style your looking for you won't find a better bag for the money. It's not extremely rugged but I'm not the sort to take my tablet hiking, into combat or around a construction site. Hopefully it's still useful once my dock arrives.
I took more than enough pictures and you can find them all here.
Id be all over that if it were black!
Baconstrip said:
Id be all over that if it were black!
Click to expand...
Click to collapse
They do have black variations floating around. I have the exact same bag except in black and without the shoulder strap. I originally got it for my netbook a year ago or so. I realized that when I got my tablet that many of my carrying accessories for my netbook would also fit my tablet. Works wonderfully.
Baconstrip said:
Id be all over that if it were black!
Click to expand...
Click to collapse
In Black
This is what I'm going to pick up for my Transformer & dock.
RooCase has 2 models of cover. I bought the lighter one that was supposed to be 6 oz. While it doesn't add much weight and bulk, it is noticeable.
It is a nice fitting cover, seems well made and proper openings for all the ports.
However on 3 sides the cover has what I call flanges - not a smooth rounded form fitting way to close in the sides.
While I have neither the base nor the keyboard portfolio, the flanges might prevent proper usage without removing the TPT from the case.
I'll let you know next month when they arrive.
The only other thing is that it would have been nice to have magnetic closure on the cover.
Not for an Apple affect but so it the case is dropped the cover will remain closed and offering a little more protection to the face of the tablet.
Shofar1 said:
RooCase has 2 models of cover. I bought the lighter one that was supposed to be 6 oz. While it doesn't add much weight and bulk, it is noticeable.
It is a nice fitting cover, seems well made and proper openings for all the ports.
However on 3 sides the cover has what I call flanges - not a smooth rounded form fitting way to close in the sides.
While I have neither the base nor the keyboard portfolio, the flanges might prevent proper usage without removing the TPT from the case.
I'll let you know next month when they arrive.
The only other thing is that it would have been nice to have magnetic closure on the cover.
Not for an Apple affect but so it the case is dropped the cover will remain closed and offering a little more protection to the face of the tablet.
Click to expand...
Click to collapse
can you Share the pictures ?
Although the OP did not provide a link, I think these are the two models he is referring about.
rooCASE Exectuive Portfilio Leather Case Cover for Thinkpad 1838 (zipper style)
rooCASE Dual-View Multi-Angle Leather Folio Case Cover for Thinkpad 1838
TS
I got the Executive case and have had it for about a week now. It's solidly made and is very protective. Plenty of padding to protect it from drops at reasonable heights.
The removable housing that the tablet is actually inserted in is quite nice for handling the tablet in once you get to where you need to be with it. It attaches by velcro.
Some gripes I have with it (all minor): Slightly more difficult to press buttons in the soft menu bar, since I used to swipe up from the bottom to press them. Speaker is partially obstructed (though no notable decrease in volume or quality). If you attach your pen with the cable you will have to untie it to take the tablet out of the housing. More significantly, you cannot access the resest/sim/sd panel while it is the housing.
Pictures (can't link or post images yet):
i.imgur.com/8UH3o.jpg
i.imgur.com/ZXEDE.jpg
i.imgur.com/RGMlZ.jpg (obstructed SD Card panel)
i.imgur.com/IR5Lo.jpg
i.imgur.com/E2Q8i.jpg
The case doubles the weight of the tablet, but I was expecting that and I wanted the better padding for protection.
Seems to be a very durable case and I don't see myself ever looking for an alternative.
Here you go...
MrKwatz said:
I got the Executive case and have had it for about a week now. It's solidly made and is very protective. Plenty of padding to protect it from drops at reasonable heights.
The removable housing that the tablet is actually inserted in is quite nice for handling the tablet in once you get to where you need to be with it. It attaches by velcro.
Some gripes I have with it (all minor): Slightly more difficult to press buttons in the soft menu bar, since I used to swipe up from the bottom to press them. Speaker is partially obstructed (though no notable decrease in volume or quality). If you attach your pen with the cable you will have to untie it to take the tablet out of the housing. More significantly, you cannot access the resest/sim/sd panel while it is the housing.
Pictures (can't link or post images yet):
i.imgur.com/8UH3o.jpg
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
i.imgur.com/ZXEDE.jpg
i.imgur.com/RGMlZ.jpg (obstructed SD Card panel)
i.imgur.com/IR5Lo.jpg
i.imgur.com/E2Q8i.jpg
The case doubles the weight of the tablet, but I was expecting that and I wanted the better padding for protection.
Seems to be a very durable case and I don't see myself ever looking for an alternative.
Click to expand...
Click to collapse
Just wanted to give a quick review of the non-executive version of this case. I got it for ~23 bucks on overstock a few weeks ago.
The inner section of it is exactly like the pictures above, and the outer section basically is a leather slab cover that attaches via velcro to one side of the tablet, and has a small (albeit weak) magnet on the other side to stay on.
Overall, I'm okay with it considering there werent too many options, but I wish there was something a bit lighter or something that just covered the front (the thinkpad's already got a meaty backside). It's weird that this thing is almost as thick as my macbook.
Before I begin - yes, I know I'm being ultra-picky. I'm still looking for the "perfect" case, or as close to it as I can get. I don't have a dock so I'm not distinguishing those which also cover that, and I'm not counting sleeves. Despite finding hundreds of cases on Amazon and eBay, it appears there are only a few different types - with slight variations.
Here's what I found, with my $.02 below...
Silicone
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Won't protect the screen
-------------------------
Asus origami front cover
Horrible reviews, won't stay closed
-------------------------
360-degree, velcro or snap mechanism
Bulky
-------------------------
Another type of 360-degree case
Bulky
-------------------------
Tab-style folding mechanism
Keeps slipping out of tab in nearly-flat mode
-------------------------
Folio with kickstand
Bulky
-------------------------
Three-position stand
Had one, returned it - the hard clip that holds the
cover to the device hits the screen before slipping over
the edge. It will likely scratch the screen eventually
or cause wear on that edge.
-------------------------
Multi-angle stand
Stand not stable, don't like material covering the bezel
-------------------------
Triangle-fold
don't like material covering the bezel
-------------------------
Flap style, no stand
No stand
-------------------------
Sikai leather/plastic
Not bad, plastic/leather combination is ugly
I know there is a member here working on a plastic back case that looks promising, but I don't think that will be available any time soon. Have I missed anything else?
Let me know!
swordsman74 said:
I know there is a member here working on a plastic back case that looks promising, but I don't think that will be available any time soon. Have I missed anything else?
Let me know!
Click to expand...
Click to collapse
BobJ is coming out with a silicone case, that works great! (I have a prototype, and he's told me the changes he's implementing, some of which I had recommended)
He's very conscientious about making quality cases, as is obvious from his Amazon reviews on the BobJ Toshiba Thrive cases he sells.
No, it doesn't cover or protect the screen, but if you feel the gorilla glass is sufficient, or if you don't and get a screen protector, it should be an issue.
All ports and openings will be accessible, and it provides excellent protection to the device.
Should be available in one to two weeks, hopefully.
You can go to www.bobjgear.com to check out what they'll look like.
swordsman74 said:
I know there is a member here working on a plastic back case that looks promising, but I don't think that will be available any time soon. Have I missed anything else?
Let me know!
Click to expand...
Click to collapse
there are 2 that I know of:
Sikai also makes a Microfiber case that is available on ebay. its essentially a tri fold covering the bevel but made out of microfiber.
great reviews from people on this board, but to me the way the stitching sticks out on each side is a deal breaker. and there is no way it wont start to stretch out and eventually the prime will have room to wiggle inside.
the Noreve high end leather case.
http://www.noreve.com/langue/en/pro...ormer_Prime_TF201_Tradition_leather_case.html
its a three position case made of high end materials that seems to deserve its own category. only issue is the price, which matches the high end materials.
its a shame marware hasnt come out with their 3 position case for the Prime. great materials, the bottom corner clips are felt on the inside so tbey dont scratch the screen and its half the price of the Noreve (based on ipad prices).
BBKB1217 said:
there are 2 that I know of:
Sikai also makes a Microfiber case that is available on ebay. its essentially a tri fold covering the bevel but made out of microfiber.
great reviews from people on this board, but to me the way the stitching sticks out on each side is a deal breaker. and there is no way it wont start to stretch out and eventually the prime will have room to wiggle inside.
Click to expand...
Click to collapse
I have been using the Sikai Microfiber style case for a few months now and it hasn't stretched out at all. The material the case is made from isn't stretchy, it is a firm synthetic material similar to the material used in Apple's iPad Smartcover.
The seams are heat sealed as well as stitched. The edges are slightly flexible and are very comfortable in your hand, much nicer than the Prime's somewhat sharp edges.
If you are looking for a thin and light case to protect your Prime, it is one of the best ones available right now.
I wasn't happy with the selection of cases for the 4.2 Player. The only decent leather fitted cases I could find (PDAir ($29) and Noreve (49 euro)) seemed a bit pricey for what they are.
As many of you will know, the 4.2 is very similar in size to the Samsung S2 phone.
Dimensions:
4.2 player: 124.1 x 66.1 x 8.9mm
Galaxy S2: 125.3 x 66.1 x 8.5mm
Critically, the width is identical, which means some fitted S2 cases might work for the 4.2. And as the S2 becomes "old news", prices for the cases are falling.
I like Terrapin cases, and I found that I could buy one for the S2 for £5/$7 (I bought it from Amazon UK, but it was also available on eBay for the same price). The overall fit was very good:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
The extra 0.4mm of depth on the 4.2 didn't make any difference, it slides in nicely, and the case closes normally (a nice magnetic clasp). The only problem was that the bottom grip on the case blocked the headphone socket:
My first thought was to put the player in "upside down", but then the side grips blocked the volume control.
My next thought was to cut the bottom grip vertically in half to uncover the headphone socket, but it turns out that the grip, which is covered in leather, is metal on the inside, and even using the sharpest knife I could find (which was supposed to be able to cut metal), I couldn't cut my way through.
So I went on to plan C, and broke the bottom grip by bending the metal backwards and forwards until it gave way. Then I cut through the leather from the inside, removed the broken clip, cut and folded the leather to make a neat fold, and glued it in place:
Looks fine to me, and the side grips hold the player firmly. It remains to be seen how this works over time, but for now I'm happy with the result.
Other things to mention: Luckily, the camera is in the same area as the camera on the S2. As you can see in the first picture, the rear of the case folds about a third of the way down the back, to allow access to the camera without removing the player from the case. And in case it bothers anyone who's thinking of doing the same thing, I should mention that there are two holes in the case for buttons on the S2 that do not correspond to buttons on the 4.2, so if that would bother you this is not the case for you:
Just ordered a case for mine, will check out the fit and put some pictures up when it comes through!
http://www.amazon.co.uk/gp/product/B005DR45D8/ref=oh_details_o02_s00_i00
got this through the post today, fits perfectly, will need to modify a bit for the headphone jack. will try to get some pictures up over the weekend
Sent from my Transformer TF101 using xda premium
I purchased a fitted case for the SGP 4.2 on amazon a couple days ago:
http://www.amazon.com/gp/product/B00A9NLCRI/ref=oh_details_o02_s00_i00?ie=UTF8&psc=1 (not particularly sure if the item is still available )
I believe you can buy the same ones on ebay. It was fairly cheap and fits very well.
I was hoping they'd make bumpers for these
MetaMav said:
I purchased a fitted case for the SGP 4.2 on amazon a couple days ago:
http://www.amazon.com/gp/product/B00A9NLCRI/ref=oh_details_o02_s00_i00?ie=UTF8&psc=1 (not particularly sure if the item is still available )
I believe you can buy the same ones on ebay. It was fairly cheap and fits very well.
Click to expand...
Click to collapse
The best case available. Tpu is pretty good
Sent from my YP-GI1 using xda app-developers app
MetaMav said:
I purchased a fitted case for the SGP 4.2 on amazon a couple days ago:
http://www.amazon.com/gp/product/B00A9NLCRI/ref=oh_details_o02_s00_i00?ie=UTF8&psc=1 (not particularly sure if the item is still available )
I believe you can buy the same ones on ebay. It was fairly cheap and fits very well.
Click to expand...
Click to collapse
i got this case few days ago and yes this is perfect. !!!
I'm going to buy this one from Amazon UK:
http://www.amazon.co.uk/Amzer-Hybri...1387&sr=8-1&keywords=amzer+samsung+galaxy+4.2
It's only £5.99.
While I wait for it, can I remove the battery case once I fit the new case? Would this cool the battery down?
So time for a review of the Speck StyleFolio case.
Before I start though, this is replacing my Samsung Book case. So what's wrong with the book case? Well, the following:
No cover retention means it slips around and can open at any time
Limited viewing angles and poor stability in landscape standing up
No cut out for the camera on the front so you have to hold the cover up to take a phone, which is ridiculously awkward.
Limited protection on the sides
So, I hunted amazon for ages looking for a replacement. I knew what I wanted and there are a few cases in the same style as the Speck. I have previously had a Speck with my iPad Mini (now sold, cause it was rubbish ). I was impressed with the case then so when I stumbled upon their Note 12.2 version I jumped in and ordered one from Amazon. Link below:
http://www.amazon.co.uk/Speck-Style...TF8&qid=1423682176&sr=8-1&keywords=Speck+12.2
Now lets face it, this isn't a cheap case. It's £36 in the UK, bit of a rip off considering it's only $35 through Amazon.com LOL. Still there we go, welcome to rip off Britain.
First impressions, this is a SOLID folio case. The cover and back are thicker than the book cover and also the plastic insert where you clip the tablet in, extends around the WHOLE tablet (apart from cutouts for speakers, pen etc.. And this thing is a tight fit, the tablet really clicks into it and the plastic is nice and thick. The only cut out missing which is a little disappointing is the SD card slot. But I guess how many times do you swap cards?
Lets talk about viewing angles. This case is rock solid both standing up in landscape and laid down at an angle. THe groves on the inside of the cover stop the tablet slipping and they do a decent job with 4 positions available. Laying down the tablet has to be turned upside down but once in position, it will NOT move. The book cover was only held by a magnet and could easily slip.
Because the cover opens from the bottom, if you want to take a picture, the cover hangs down allowing both hands on the tablet, excellent! .
Finally the clip. There is a plastic clip for the cover which is very solid and locks closed very well. The elastic allows a little movement over the cover and clip.
This case in my opinion is THE best folio case available for the Note 12.2. Because it locks shut, there are no magnets to cause problems, or metal to fall off (as happens to some other cases). The complete all round side protection is perfect and the material/thickness just right.
One last thing. I was torn between a case and a keyboard case. Problem is, I won't use the keyboard that much so having it attached all the time seemed silly. The book cover however wasn't good enough standing up with a BT keyboard, so this case with a external BT keyboard will be perfect I think.
And finally some photos
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Yup I love mine as well, replaced a Belkin book cover case with it recently and will never pick up a "smart" cover/folio again. I just had too much issues with pen sensitivity with my prior case.
Thanks for the review!
For reference here's another one that was posted a while back:
http://forum.xda-developers.com/showthread.php?t=2743380
Great review of a great case. I've had the Speck case for 6 months, and it continues to provide solid and secure overall protection. I've been very pleased with the quality materials and design which have held up very well. The Speck case is well worth the price to protect this high-end tablet.
=GO=