My O1 shuts down every few hours by itself. As everybody told me, i removed the sd card to see if that is the problem, but it still shuts down. Al this "shutdown frenzy" started after i flashed the first custom rom, Void.
I flashed back via nand recovery, i did all possible stuff, but nothing. As i tried reinstalling the original firmware i found out that i coudnt, theres no firmware for Romania, and the KDZ crashez on my machine...
Any suggestions on this one?
Ruwin said:
My O1 shuts down every few hours by itself. As everybody told me, i removed the sd card to see if that is the problem, but it still shuts down. Al this "shutdown frenzy" started after i flashed the first custom rom, Void.
I flashed back via nand recovery, i did all possible stuff, but nothing. As i tried reinstalling the original firmware i found out that i coudnt, theres no firmware for Romania, and the KDZ crashez on my machine...
Any suggestions on this one?
Click to expand...
Click to collapse
Strange... it's really hard way to resolve, but what about some logging on SDCARD? Problem is that it can be really huge file. And Murphy law... it definitely will not restart for many hours...
I just bought a class 6 sd card, i'm testing it, maybe it's the card that shuts down the phone... i'll post the result tomorrow.
Lol man , I have the V10B for romania . I can give it to you on messenger if you add me : zerobarat1 .
Cheers
I had void with gapps, gingerbread, kernel, a2sd, blink, tapps folders on sd. Then I flashed milk_os kernel. Everything was fine.
Then I created stage fright and hwacc folders for quadrant testing. Something happened my neocore score was only 9 fps (though quadrant was 1100). I deleted stage fright, hwacc and kernel folders. Phone was fine again. But was going to sleep of death after some time of non usage. Didn't reboot even from power button. Had to take put and reinsert battery.
So I created the kernel folder again and rebooted. Went into recovery again and applied milk_os kernel again and rebooted. Everything is fine now.
Something remotely similar happened to me a while ago. I found the phone turned off without any particular reason and it refused to power on until I removed and reinserted the battery. It had me worried, but fortunately this didn't happened again ever since.
My problem seems unsolved. I also found my phone dead two times again only in last 4 hours.
Guys any solution. I have void with a2sd enabled and with mik_os kernel 1.1
Did you have the same problem when you were on stock? It might be a physical fault rather than the rom. Also, I believe the latest void already have mik_os kernel 1.1? So there was no need to flash it again.
a2sd maybe? I read quite a lot of issues with that thing.
Miks kernel 1.1 has some scrolling bugs, flash 1.0 and maybe problems solved
I applied mik_os v 1.0. Now everything seems ok for last 16 hours. Will notice further.
Everything ok till now. May be it was something related to mik_ os 1.1.
With 1.0 problem seems to be fixed as of now.
Try dev kernel v3, it's enhanced version of mik's v1.0 kernel
Sorry to say, but this damn bug stroke again. I just found my phone dead, unwilling to reboot unless I took out the battery (which, by the way, was 94% full).
I'm using void #alpha with a2sd and mik_os kernel 1.0 and I don't have the sdcard unmount problem. I can't tell if this also happens on stock ROM since I don't intend to go back to stock ROM until LG rolls out the 2.3 version.
Waiting for some stock ROM user input, but my guess is that this is hardware related.
Any help?
That happens to me all the time!! I took it to LG center and they said it's because of software problem. Anyway, now my phone has one problem. I accidentally made the locker apps to make default screen and it totally black out my home screen. I can't access to my setting to get rid of this apps or can't make even calls. I tried restarting again and again but it doesn't work. How can I uninstall the apps on phone storage by using PC? Or any better way to solve it. I'm a beginner to Android. So, please kindly help me. It is so annoying.
Hit the search button on phone and if search screen appears, type settings in it. If you are able to reach settings, you can do everything from there. Try playing with the search button on the phone.
If this does not help, you will have to do a factory reset. You can do a factory reset by the pressing the combo of home + vol down + power on buttons if you are on stock rom. If other rom, do via recovery.
winnie34 said:
That happens to me all the time!! I took it to LG center and they said it's because of software problem. Anyway, now my phone has one problem. I accidentally made the locker apps to make default screen and it totally black out my home screen. I can't access to my setting to get rid of this apps or can't make even calls. I tried restarting again and again but it doesn't work. How can I uninstall the apps on phone storage by using PC? Or any better way to solve it. I'm a beginner to Android. So, please kindly help me. It is so annoying.
Click to expand...
Click to collapse
same here too .... (when the phone turn off the screen automatically...or auto suspend...is the same) i have the #echo and .... i have the random power off and... some times... it keeps on the boot loop when it supous to suspend... butn when i suspend the phone whit the power button ... the phone keeps working fine... i dont know what to do... XD
I got the class 6 SD and since then i had no problems with shutdown. Though at the time i'm writing, my O1 is at service. It seemed that the shutdowns are related to the sd, even if you don't get any unmount errors. My logs say that each time the phone shut down, it was trying to access a service from the sd memory, and, guess what, there was no sd! So it closed all the services.
could it be unmounting sd card?
After a long time of checking how to fix this, I, finally found it.
I had this error several times, and, I always tried to check where it was the error. I did a factory reset and, suddenly this error stopped. But I needed to know exactly by "doing what" this error appeared.
This error appears in one of this two:
- if you dissactivate the "rotation" in your phone.
- if you dissable bluetooth in your phone
One of those two. If I dissable this two, my phone, in about 1 hour, it suddenly shutdown. But inmmediatly if I enable this options, its stops to crash.
You can toogle this options with the "battery" widget in your phone.
I hope this will help you, as it helped me. Plz, tell all the ppl about, how to fix this.
Hellao Everyone
Well i FLashed (OFFICIAL) [email protected]_2.3.3_v2 two days ago with Franco's LAtest [KERNEL][12 JUL]franco.Kernel |.v1-GINGERBREAD| 2.6.35.13
Everything RUns Smooth and makes a 770 Quadrant Score with CPU settings on
122/691 using nofrills with interactiveX
Smoothass for some reason BUrns my Battery down very fast idk why ;S
coming to the point
both Tethering Dosn't Work here, neither USB not wifi :S
and another thing i noticed my Boot Animation is Still the same old Android and ...
When i lock the phone, Screenlock thingie there is no sound :S
any Suggestions
Your boot animation is still what?
v 2 has android eating apple...if your boot doesnt have that then you have failed flashing I guess.
I used v 2 for a couple of days, the wifi tethering worked, I didnt try usb tethering.
Back to v 1.2 for some reasons, especially the battery which I think last longer in the earlier version.
Regards
ok i re flashed the v2 patch, now i see the Droid Eating Apple, lmao'd there coz i was waiting to see it the 1st time but i just got the other default android thingie,
about the tethering,
1st time it says Wifi Hotspot Hosted but when my laptop connects to it, or i can say establishes connection to the hotspot it says Error on the Phone and the Tethering Icon Disappears.
i can ping to the phone but it dosn't send/receive anything :S
and wifi kinda gets bugged after this in the sense it connects to my wifi router but dosn't process any data, it uses EDGE to Send/Receive Data
ok its official Tethering dosn't work with v2 Some more ppl posted on the Official Thread so i guess its the kernel's fault coz some ppl have trouble with wifi too,
hope Franco implements a Update soon ;-D
Anyways thanks for the info @least my Boot Animation Changed xD
Hello!
I've been reading a lot about this new gingerbread and stuff.. I came to flash this rom after the official flashing... just because I wanted root and oc.
BUT, idk really why, some apps doesn't work right...
sadly, I didn't try to install this apps BEFORE flashing this ROM.
the apps are:
Jed (Japanese dictionary), this just crash after installing the dic files...
Kanji Recognizer, this is in a loop, you download the dic files over and over again...
It's weird, I thought first it was because of some problems with Japanese language and characters,,. but I've had to find other (not so good) apps for this matters... Also I've searched if somebody else had this problems with this app in Gingerbread but it seems that it's only me...
if somebody have any clue... please
Thanks!
hello people, i am having problems with my galaxy player 5.0 freezing up
i am using the cm 9 rom found here: http://forum.xda-developers.com/showthread.php?t=1679957
heres my problem first off my cpu it is overclocking on its own and i dont want it to since it harms my device's life span i can set it to the stock setting (1000 ghz) but when i go in after a while it will show up at 1200 cpu so id like to know what is up with that?
know to problem im having some of my apps will not boot up it will start to go in but it will not load into it it will freeze and after a bit it will come up " not responding do you want to close the program" it is really bugging me i ca nstill go back to my home but it takes a while and a few trys before going into the game
could this be an unsuccesful overclocking
by the way i have the us version with this kernel http://forum.xda-developers.com/showthread.php?t=1445840 and this file (DD_01142012.tar)
it also freezes in the middle of one of my game (dream heights) is it the app or my device
some answers would really be appreciated
i will thank the people who respond with helpful replies:good:
You are not actually running entropy's kernel. cm9 comes with a kernel that is flashed along with the rom.
your overclock settings will not stay unless you tick the set on boot option.
you may want to do a full wipe/ reflash rom, or try cm10
Let me first explain what I did.
1. From stock rom, after doing the root (TWRP recovery), i flashed JellyDaemon v 2.0 listed here http://forum.xda-developers.com/showthread.php?t=2307247 . Used CPU control inbuilt in app to set CPU governer to OnDemand
Fantastic ROM with no problems.
2. After the news of 4.2.1 release came, I started looking for 4.2.1 based roms. I went with StarkHD listed here http://forum.xda-developers.com/showthread.php?t=2212028 . I think my download went wrong and file wasn't downloaded cleanly. I flashed with it. Flash went on successful. Phone got hung at the boot animation. Tried multiple methods to start the ROM. No success. Phone not booting into any ROM.
3. I had stock rom v 0.16 available with so flashed it with SP flash tools. Flash was successful.
4. Downloaded Naturewiz HD listed here http://forum.xda-developers.com/showthread.php?t=2319288 . ROM flashed and phone booted. Restored the apps. Used battery calibration app to calibrate the battery. After this, noticed that every time phone went into standby, it won't wake after that and needed reboot. I thought it to be bug in the rom.
5. Downloaded 4.2.1 based rom listed here http://forum.xda-developers.com/showthread.php?t=2306461 and flashed it. Flash was successful followed by successful TP upgrade. Installed everything. Same problem noticed. Phone won't wake from standby. Needed to be rebooted.
6. I figured it to be a CPU governer problem left over from JellyDaemon v. 2.0. So installed juice defender and set the CPU governer to OnDemand. Frequency of reboots has reduced but the problem still persists.
Problem: The phone does not wake up when put to standby for a duration of 2-3 hours.
Any solutions to this? There are no other problems I am facing.
"I figured it to be a CPU governer problem left over from JellyDaemon v. 2.0. So installed juice defender and set the CPU governer to OnDemand. Frequency of reboots has reduced but the problem still persists.
Problem: The phone does not wake up when put to standby for a duration of 2-3 hours.
Click to expand...
Click to collapse
Looks like you yourself gave an answer to your problem. Don't enable Ondemand. if you still getting the problem. take a video of your problem and try posting along with a link to the video (I am not sure whether it is allowed). this way it will be easy to know what the problem is... hope i helped..
Sent from my CaNvAs HD using xda-developer app.
adizrox said:
Looks like you yourself gave an answer to your problem. Don't enable Ondemand. if you still getting the problem. take a video of your problem and try posting along with a link to the video (I am not sure whether it is allowed). this way it will be easy to know what the problem is... hope i helped..
Click to expand...
Click to collapse
Thanks for your reply. I will try your suggestion and see. In the meanwhile, I removed TWRP and flashed CWM 6.0.3.0 and fixed permissions with that. The phone did not reboot on its own for close to eight hours (which it was doing earlier at random). I thought problem was solved. But trying to go through contacts list (DW Contacts), phone rebooted on its own.
Can anyone tell me a method where you do a clean install and bring the phone to a factory fresh state. Something similar to tutorial by team overcome for galaxy tab. Frankly, that seems to be the only possible solution: Get the phone in a completely formatted factory fresh state and then install any other ROM.
SP flash tools
To get your phone to a default factory status. you have to flash the original rom using SP tools. Links to both can be found in the forum.
Finally, tired after numerous attempts, decided to take it to the service center. Asked them to update to 4.2.1. They had the same problem. After flashing, the phone just wouldn't boot past the boot animation.
They kept trying. After two hours, they gave it back to me saying there is a hardware problem which requires a main board change.
I had suspected all along and now I know I was right. I asked them about the time line. The answer I got was even more shocking. Minimum two weeks, but there are lots of hand sets awaiting main board since more than a month
I guess I am better off with current status (Ver .20 installed and rooted).
Seriously, this episode has seriously dented my faith in micromax as a brand. One can buy there phones and be happy with whatever has been packaged. Trying anything new can be dangerous.
Hi guys. It is my first time to run cyanogenmod on my phone. I have the Samsung Galaxy Exhibit 2 4G and I tried to install the CM 11 of jfbs. I did all the backups and I wiped the data and cache and installed the ROM and Gapps. But I rebooted my device and the Cyanogenmod logo appeared with the spinning arrow and it didn't want to stop spinning (or loading if you want). My phone was stuck on logo and the spinning arrow. I forced the phone to turn off and when I rebooted it I worked but after a little time it went back to the logo and the spinning arrow. I re-installed the ROM and Gapps but like before, the logo and the spinning arrow still there until now and it won't even stop and lead me to the lock screen. PLEASE can somebody tell me if it won't work or what is wrong whit it or if it is matter of time, how long should i wait? PLEASE I need to know what is going on and what to do. :crying:
theking1st said:
Hi guys. It is my first time to run cyanogenmod on my phone. I have the Samsung Galaxy Exhibit 2 4G and I tried to install the CM 11 of jfbs. I did all the backups and I wiped the data and cache and installed the ROM and Gapps. But I rebooted my device and the Cyanogenmod logo appeared with the spinning arrow and it didn't want to stop spinning (or loading if you want). My phone was stuck on logo and the spinning arrow. I forced the phone to turn off and when I rebooted it I worked but after a little time it went back to the logo and the spinning arrow. I re-installed the ROM and Gapps but like before, the logo and the spinning arrow still there until now and it won't even stop and lead me to the lock screen. PLEASE can somebody tell me if it won't work or what is wrong whit it or if it is matter of time, how long should i wait? PLEASE I need to know what is going on and what to do. :crying:
Click to expand...
Click to collapse
(as a dev for this phone)
If you could PM me with more details that would be helpful. When i hear that it continues after a reboot(not the first person to have said that) i think its that you are not waiting enough time. That may or may not be the case. I would give it a good 5 min. I have never timed mine but it does seem to me that prior android versions took about 2-3min maybe and for w.e. reason android 4.4(cm-11.0) takes a few more min. Anything over >=10min though id say is too much. In these cases the only things that can really help are logs. Logs are the only way you can show a dev what you are experiencing.
(as a xda member)
Also i would use the device thread not the general android thread, read through the rom thread of the rom you are tryng to install, and a last and final note, I would recommend that anyone that is new to install older more mature roms first. These roms will yield the best experience in most cases. Then once you are familiar you can experiment with other roms/mods etc etc.
cars1189 said:
(as a dev for this phone)
If you could PM me with more details that would be helpful. When i hear that it continues after a reboot(not the first person to have said that) i think its that you are not waiting enough time. That may or may not be the case. I would give it a good 5 min. I have never timed mine but it does seem to me that prior android versions took about 2-3min maybe and for w.e. reason android 4.4(cm-11.0) takes a few more min. Anything over >=10min though id say is too much. In these cases the only things that can really help are logs. Logs are the only way you can show a dev what you are experiencing.
(as a xda member)
Also i would use the device thread not the general android thread, read through the rom thread of the rom you are tryng to install, and a last and final note, I would recommend that anyone that is new to install older more mature roms first. These roms will yield the best experience in most cases. Then once you are familiar you can experiment with other roms/mods etc etc.
Click to expand...
Click to collapse
Thank you @cars1189 for your answer. I used the device thread to do it but the problem is, I let it spinning for more than 5 hours. I have flashed many roms in my phone since i had it (more than 10 times or more) and i know that it does not take more than 10 mins max to install. But don't worry after that i went back and restored my previous CM 9 rom and right now i'm on the CM 11 build of 1-29-14 of your CM mass thread. It works fine, not at 100% but it doesn't drain my battery like your CM 10.2 build of 1-11-14 and it is almost stable. I will try tonight to use your ADC kernel with the jfbs CM 11 rom that first didn't work for me because I saw in your thread that this kernel may help it to load and install without the spinning issue. So i will give it a shoot. But anyways thanks for your answer and it means a lot to me really. :good:
GOOD
@cars1189 , I'm actually running the 6-18-14 build of CM11 and as far as it goes, i'm not encountering any major issue at the moment. The theme engine is working fine for me and battery life is great for my usage. I use this build as a daily driver, and it does a great job. Calls, texts, data, wifi, Bluetooth and GPS are all working. I had issues before with the amount of RAM available, but now that it has 375MB of RAM, it is more snappy. Just :good: Thank you for your work on our to make our phone still valuable today!! THANKS MAN!!!!!!