Clockworkmod - Galaxy Ace S5830 General

Evening,
Before I get bashed for starting this thread, I have searched the forum and Google but I have not yet found an answer. Also I would post this in the developers forum but I don't have rights to do that yet (post count too low).
Anyway I have been trying to flash my Galaxy Ace with clockworkmod 4.0.0.9 and I cant get it to work, I bought ROM Manager premium to try as well to no avil. When attempting to use the .ZIP file in the recovery mode I get the following:
-- Appling Muti-CSC--
-- Install /sdcard ...
Finding update package...
Opening update package...
E:Can't open /tmp/sideload/package.zip
(bad)
Installation aborted.
Click to expand...
Click to collapse
I am using ClockWorkModAce.zip downloaded from this website, I have tried to download the file again in case and that made no difference. Tried using ROM manager to apply it and that failed too. Tried it when phone was rooted and also when not rooted (after fresh Odin flash)
Using S5830XXKPH
Please help, I want to try some of these cyanogen ROMs that I have seen posted on here. Many thanks in advance for any help

Starlaugh said:
Evening,
Before I get bashed for starting this thread, I have searched the forum and Google but I have not yet found an answer. Also I would post this in the developers forum but I don't have rights to do that yet (post count too low).
Anyway I have been trying to flash my Galaxy Ace with clockworkmod 4.0.0.9 and I cant get it to work, I bought ROM Manager premium to try as well to no avil. When attempting to use the .ZIP file in the recovery mode I get the following:
I am using ClockWorkModAce.zip downloaded from this website, I have tried to download the file again in case and that made no difference. Tried using ROM manager to apply it and that failed too. Tried it when phone was rooted and also when not rooted (after fresh Odin flash)
Using S5830XXKPH
Please help, I want to try some of these cyanogen ROMs that I have seen posted on here. Many thanks in advance for any help
Click to expand...
Click to collapse
Download cwm from here
http://www.mediafire.com/?lv3fbcp1fipxqfg
or if already downloaded go in recovery mod by long pressing home+power
and update from sdcard and select cwm file you put insdcard and install
now reboot.
Now when again you go in recovery mod you found it
and remember never install rom manager it cause brick many ace

Thank you for your reply, however I still get the same message appearing when I try to install CWM... Not being able to find anyone else reporting this problem on the internet I am baffled. hmmmm
Wish I didn't bother paying out for the premium rom manager now, didn't realise it could brick my phone.

Starlaugh said:
Thank you for your reply, however I still get the same message appearing when I try to install CWM... Not being able to find anyone else reporting this problem on the internet I am baffled. hmmmm
Wish I didn't bother paying out for the premium rom manager now, didn't realise it could brick my phone.
Click to expand...
Click to collapse
What msg come when you trying to install cwm ?

Rebooting the phone and holding power & home button,
Selecting update from .zip,
Then choosing the CWM file, I then get this appear:
-- Appling Muti-CSC--
-- Install /sdcard ...
Finding update package...
Opening update package...
E:Can't open /tmp/sideload/package.zip
(bad)
Installation aborted.

Dude if not able to install cwm then how about to install rom like coderom 2x or fla.sh1 or any that kind of odin flashable rom. So you can flash it through odin and it have cwm preinstalled so you can then install cynogen mod
and you tried cwm from link i gave?
Or flash first kpb then cwm

Thanks for your help I will go off and explore more into one of the ones that I can flash through Odin. Is there one that you would recommend to assist me on my way to cyanogen mod?
Yeah tried the CWM in your link, do I stand a better chance for using CWM if I flash kpb first?
Thanks given for your assistance

Starlaugh said:
Thanks for your help I will go off and explore more into one of the ones that I can flash through Odin. Is there one that you would recommend to assist me on my way to cyanogen mod?
Yeah tried the CWM in your link, do I stand a better chance for using CWM if I flash kpb first?
Thanks given for your assistance
Click to expand...
Click to collapse
Cwm not installed may cause you done some thing wrong with kph
so.flash first new firmware whether kpb ,ddkq5 or any other
so you can able to install cwm

I will give your advice a go and post back with the results, you sir are a gentleman... thank you

well I managed to flash with Coderom.v2x with Odin, have tried with a couple of different cyanogen ROMs but neither worked. Still got the same errors as above.
I cant be that unlucky that anything I try doesnt work... I must be doing something wrong but I dont know what!!

Well I certainly don't understand how you are flashing from a directory "sideload package". I forgot about the stock recovery menu, is there a choose zip to install function?

I get exactly the same error, but not when I flash my phone, but when I try to root it.
I flashed it with no problem (S5830LUBKP7), but when I try to root it with either up_1.zip or AceGingerRoot.zip, I get the error
-- Install /sdcard ...
Finding update package ...
Opening update package ...
E:Can't open /tmp/sideload/package.zip
(bad)
Installation aborted.
Click to expand...
Click to collapse
I haven't been able to finda solution for this problem, I would appreciate any help please...

Related

ClockworkMod recovery released!

Hey guys!
The ClockworkMod recovery has been released. http://forum.xda-developers.com/showthread.php?t=787168 Check out this post and do what it says. Once it is finished go download ROM Manager from the Market and update your recovery! I will have a rom out ASAP after I get it tested :] If you wanna test email me at [email protected]
Which of those 3 zip files needs to be flashed ?
So does that mean that samsung reviewed and fixed the code they released or was there something that the devs were missing when trying to build the kernel?
CheetoDroid said:
Which of those 3 zip files needs to be flashed ?
Click to expand...
Click to collapse
the captivate one.
SeaWo|f said:
So does that mean that samsung reviewed and fixed the code they released or was there something that the devs were missing when trying to build the kernel?
Click to expand...
Click to collapse
this is for the recovery... i dont think the kernel or the source is building yet.
SeaWo|f said:
So does that mean that samsung reviewed and fixed the code they released or was there something that the devs were missing when trying to build the kernel?
Click to expand...
Click to collapse
This is not built from source, this is a duct taped together version of recovery, it should work for now though.
I've got CWM running on my Fascinate! =)
Too bad it doesn't mount the SDcard and it places nandroid backups in /data, but it's a start. =)
Do we flash it in ODIN using the PDA box ?
geeknik said:
I've got CWM running on my Fascinate! =) Ran Nandroid as well and it backed up to /sdcard/clockworkmod/backup. =) Can't wait to get some ROM love now.
Click to expand...
Click to collapse
thanks to geeknik he was the lab rat.
Fascinate is in rom manager options. Sweet
Sent from my SCH-I500 using Tapatalk
good stuff!
Very exciting news.. Looking forward to coming home and giving it a try.. at least making a full nandroid backup.. I've had to rebuild this phone from scratch way too many times now.
I'm not really clear on the instructions.
I have downloaded the captivate_recovery.zip but I'm not sure how to proceed from that point. Am I using Odin?
This isn't working for me, I flashed the tar file in ODIN and then installed clockwork from rom manager. When I click reboot into recovery it loads up a stock recovery and gives some errors under it.
Update with more info:
When I reboot into recovery from RomManager I get
e: failed to verify whole-file signature
e: signature verification failed
Installation aborted
I'm thinking this means the ODIN flash didn't work correctly
Maybe someone could post clear step-by-step instructions?
what tar file cheeto. all i'm seeing is three zip files, that when unzipped have no extension. a little help?
CheetoDroid said:
This isn't working for me, I flashed the tar file in ODIN and then installed clockwork from rom manager. When I click reboot into recovery it loads up a stock recovery and gives some errors under it.
Update with more info:
When I reboot into recovery from RomManager I get
e: failed to verify whole-file signature
e: signature verification failed
Installation aborted
I'm thinking this means the ODIN flash didn't work correctly
Click to expand...
Click to collapse
You flashed a new recovery kernel with the clockworkmod recovery binary. I'm confused why you would try and install again, on top of it, from ROM manager? (Don't take that the wrong way.. that's not an "OMG Why would you do that?!" It's an "I'm not following your logic".. )
Re-do your initial step (flash recovery via odin) and that should be it, unless I'm missing something here.
and for those of us still out of the loop... how do you flash the recovery via odin? add a .tar to the file in the zip? rename the .zip file to .tar? help us out please.
sonofskywalker3 said:
and for those of us still out of the loop... how do you flash the recovery via odin? add a .tar to the file in the zip? rename the .zip file to .tar? help us out please.
Click to expand...
Click to collapse
Hang in there, I know it's frustrating. Let us get some more feedback on this and how it's working before the steps are broken down so that anyone can follow along. The last thing we all want to see is post after post from people who did this not knowing how to fix their phones if something goes wrong.
If you're confident you know what's going on, the posts are there, in the Fascinate forum, on how to use odin. Feel free to check them out.
BE CAREFUL EVERYONE. there are quite a few issues with cwm still, It doesn't detect the sdcard, so you wont be able to flash a backup. and you can only get into recovery by rebooting into recovery through rom manager.

Uninstalled TWlauncher and done factory reset...

And now I cant access my phone. When I turn it on i got black screen only with clock and battery info. I can grag the drawer down to turn on/of wifi, gps... and enter management when i long hold home button.
I need to find a way to install launcher. Bluuetoth wont work because it is not paired after factory reset. Wlan is useless. I cant install anything from SD either.
I cant use odin to flash firmware because i will loose warranty. And I cant take it to service center because I didnt unroot it.
The only way I see that can help is instal launcher throug recovery mode using update.zip file. But when i try to install it it says :
--Install from sdcard...
Finding update package...
Opening update package...
Installing update package...
Installation aborted...
I put golauncher.apk in update.zip file and signed it using autosign.
Can anyone help?
It may be I am doing something wrong while creating update.zip. Can someone do it for me and upload it with any launcher within it?
Thanks alot in advance!!!
Do you have the CWM 4.0.0.9 recovery installed or can you flash the CWM 4.0.0.9 recovery?
If you can then boot into CWM - mount the USB - copy over a modded rom like Fla.sh2X or FirstUA to the SD.
Then flash that rom.
If you have the 3e recovery - then I suggest flashing a rom with Odin.
or install via adb. google for an tutorial
@Baracs I do not have any recovery, I didn't figure out how to make one...
@downloadonlyaccount Thanks, I'll do a research.
speedy051 said:
@Baracs I do not have any recovery, I didn't figure out how to make one...
@downloadonlyaccount Thanks, I'll do a research.
Click to expand...
Click to collapse
to make it extra simple download Qtadb if you are not familiar with command shell.
speedy051 said:
And now I cant access my phone. When I turn it on i got black screen only with clock and battery info. I can grag the drawer down to turn on/of wifi, gps... and enter management when i long hold home button.
I need to find a way to install launcher. Bluuetoth wont work because it is not paired after factory reset. Wlan is useless. I cant install anything from SD either.
I cant use odin to flash firmware because i will loose warranty. And I cant take it to service center because I didnt unroot it.
The only way I see that can help is instal launcher throug recovery mode using update.zip file. But when i try to install it it says :
--Install from sdcard...
Finding update package...
Opening update package...
Installing update package...
Installation aborted...
I put golauncher.apk in update.zip file and signed it using autosign.
Can anyone help?
It may be I am doing something wrong while creating update.zip. Can someone do it for me and upload it with any launcher within it?
Thanks alot in advance!!!
Click to expand...
Click to collapse
Hold down the home key and hope you have file manager in recently used.
Sent from my GT-S5830 using xda premium
Okay, I'll try to help:
1. Get ClockworkMod 4.0.0.9 (the official one), and flash it through stock recovery. (Sorry, using my phone, can't link to the thread)
2. Install the update.zip file through CWM. Some update.zip files can only be flashed through CMW.
I really hope that helps.
Oh, and IMHO, you shouldn't have to worry about burning the warranty. It should still be valid if you can flash a stock firmware (from your appropriate region, of course).
I once took my phone to a Samsung Service Center just to check if thr warranty is already void -- with a recently flashed stock firmware from Asia -- and it isn't.
Sent from my GT-S5830 using XDA App

[Q] Update package error in ROM Manager

Hello all, new user here.
I am trying to install a custom ROM on my Samsung Galaxy SII and am really stuck.
I have rooted the phone, installed ROM Manager and flashed Clockwork MOD Recovery, but when I try to backup my current ROM I see this:
- Initializing package...
Finding update package...
Opening update package...
Verifying update package...
E: Failed to verify whole-file signature
E: Signature verification failed
Installation aborted.
I have options to:
reboot system now
apply update from sd card
wipe data/factory reset
wipe cache partition
Does anyone know why this is happening and what I can do to fix it? I am dying to install my new ROM :-(
Any help/advise you can give me will be much appreciated.
skincla
You don't have CWM recovery, that's stock recovery.
skincla said:
Hello all, new user here.
I am trying to install a custom ROM on my Samsung Galaxy SII and am really stuck.
I have rooted the phone, installed ROM Manager and flashed Clockwork MOD Recovery, but when I try to backup my current ROM I see this:
- Initializing package...
Finding update package...
Opening update package...
Verifying update package...
E: Failed to verify whole-file signature
E: Signature verification failed
Installation aborted.
I have options to:
reboot system now
apply update from sd card
wipe data/factory reset
wipe cache partition
Does anyone know why this is happening and what I can do to fix it? I am dying to install my new ROM :-(
Any help/advise you can give me will be much appreciated.
skincla
Click to expand...
Click to collapse
+1. I have the same problem, flashed cwm, did a backup but wasn't taking any notice of the system, later after a few mods trying to sort my calendar out i reverted to my backup to find it didn't bckup at all.
I've emailed the developers but that was 4days ago, still no reply. I wad gona post here but seen as i'm a newbie I get little too no reply if i post.
--
smash
Sent from my GT-I9100 using XDA App
oinkylicious said:
You don't have CWM recovery, that's stock recovery.
Click to expand...
Click to collapse
what's the difference? I thought having cwm installed would automatically work just like any other app..
I'm rooted, using a stock ROM (I'd change it if I got cwm to work), firmware KI8.
--
smash
Sent from my GT-I9100 using XDA App
check this out
www.addictivetips.com/mobile/what-i...-and-how-to-use-it-on-android-complete-guide/
--
smash
Sent from my GT-I9100 using XDA App
For what its worth.. I tried restoring a backup using RM and ended up in "android system recovery" instead of CWM, and also got installation aborted. After a reboot I ended up in CWM and the restore finished. Strange stuff..
Sent from my SGH-I777 using xda premium
The question for post one is as always .
Does the instructions for the custom rom install say install via Rom Manager .
No idea what the rom is so cannot check .
Most of them say root kernel with Chainfires CWM and root Kernel and flash rom via CWM .
jje
JJEgan said:
The question for post one is as always .
Does the instructions for the custom rom install say install via Rom Manager .
No idea what the rom is so cannot check .
Most of them say root kernel with Chainfires CWM and root Kernel and flash rom via CWM .
jje
Click to expand...
Click to collapse
Hi JJE,
I want to install SensatioN ROM (http://forum.xda-developers.com/showthread.php?t=1194765)
The kernal is installed using Odin, the ROM is installed using Rom Manager.
Skincla
oinkylicious said:
You don't have CWM recovery, that's stock recovery.
Click to expand...
Click to collapse
How do I get CWM Recovery working?
skincla said:
How do I get CWM Recovery working?
Click to expand...
Click to collapse
You need to flash a kernel that has CWM. This is usually done via Odin or Heimdall. Once you get CWM recovery on your phone you'll be set to flash zip files for ROMs and whatnot.
If you don't know how to flash the kernel.. start at the beginning and read a helpful guide or instructions. Sorry on my phone now and don't have any links handy..
Sent from my SGH-I777 using xda premium
skincla said:
Hi JJE,
I want to install SensatioN ROM (http://forum.xda-developers.com/showthread.php?t=1194765)
The kernal is installed using Odin, the ROM is installed using Rom Manager.
Skincla
Click to expand...
Click to collapse
FIRST PAGE SAYS .
If you install for the first time SensatioN ROM, I recommend you to use the WIPE version. The NO WIPE version should be used if you are already on SensatioN ROM or on other fully deodexed ROM.
Before you install SensatioN ROM, make sure that you have CF-ROOT kernel installed on your phone, or ninphetamine.
Steps to install CF-ROOT kernel:
1.Download the kernel from here: http://forum.xda-developers.com/atta...8&d=1312203859
2.Power off phone, and enter in DOWNLOAD MODE
3.Put the downloaded zip into PDA section of ODIN, and flash it
4.Let the phone reboot
Steps to install the ROM:
1.Copy the ROM file on your SD card
2.Reboot you Phone into CWM
3.Navigate to Install Zip from SD Card
4.Select Choose ZIP from SD Card
5.Select SensatioN_ROM_by_CRYSIS_i9100_(no)wipe.zip
6.Wait until the ROM is installed and reboot your Phone.
7.If you have any bootloops with the NO WIPE version, you will probably need WIPE .
No mention of ROM MANAGER here maybe you have other instructions or its the usual ??
--------------------------------------------------
jje
@ OP
Have you tried "Toggle signature verfication check" in CWM?

Is it possible to gain root access without flashing a new ROM or Kernel?

I read a blog post sometime a while back about booting into standard recovery and flashing a .zip package that installs SU and...something else but otherwise didn't change anything besides giving you root access. Does anyone know how this would be possible and if so how to do it? I just want to get rid of bloatware but nothing else. Any suggestions or links for further reading would be appreciated. Thanks.
PS. I've got a recovery-clockwork.img file and a CWMSuperSu_BusyBox.zip file on my external SD but am a little confused as to how to use them. I can get into the stock recovery and have the ability to flash .zip files but I'm not sure what order to do so in or what the .img is for.
If I flash the superSu.zip file will that alone give me root access enough to get rid of bloatware and dig around in my system files with Root Explorer?
My reply won't be too helpful (no links or suggested readings), but I've often completed a basic root on my devices without using custom ROMs. The first 6 months of having my original galaxy s (captivate) I just rooted and kept stock. It was fun to have some advanced control and do basic mods.
The root is incredibly easy, I'm sure there's a great guide in the Note forums. I've got an s3 and it was a snap.
Good luck!
Sent from my SGH-I747 using xda app-developers app
nogloww said:
I read a blog post sometime a while back about booting into standard recovery and flashing a .zip package that installs SU and...something else but otherwise didn't change anything besides giving you root access. Does anyone know how this would be possible and if so how to do it? I just want to get rid of bloatware but nothing else. Any suggestions or links for further reading would be appreciated. Thanks.
PS. I've got a recovery-clockwork.img file and a CWMSuperSu_BusyBox.zip file on my external SD but am a little confused as to how to use them. I can get into the stock recovery and have the ability to flash .zip files but I'm not sure what order to do so in or what the .img is for.
If I flash the superSu.zip file will that alone give me root access enough to get rid of bloatware and dig around in my system files with Root Explorer?
Click to expand...
Click to collapse
UPDATE: I found the thread I was referring to: http://forum.xda-developers.com/showthread.php?p=28178105
I just can't seem to find .zip files of the recovery and su installer that work. I get an error about an unsigned package and failed to recognize package every time I try and install the CWM Recovery .zip file.
If you know another way of accomplishing the same thing, again, any help would be appreciated.
Go Here:
http://forum.xda-developers.com/showthread.php?p=28040353
Look under the big green arrow in the OP:
Get drivers
Flash recovery
Root
Remove recovery
rangercaptain said:
Go Here:
http://forum.xda-developers.com/showthread.php?p=28040353
Look under the big green arrow in the OP:
Get drivers
Flash recovery
Root
Remove recovery
Click to expand...
Click to collapse
I used the files from the link you provided and I am still getting an error when installing the CWM.zip file "E:failed to verify whole-file signature" and "E:signature verification failed" Do you know what could be causing this?
nogloww said:
I used the files from the link you provided and I am still getting an error when installing the CWM.zip file "E:failed to verify whole-file signature" and "E:signature verification failed" Do you know what could be causing this?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1581185
you downloaded this file from this thread see above and you flashed it like a ROM but no wipes, and you still get this errors?
are the files on your inter sd, not exter sd (memory card) ?
They were on my SD card. No matter now. I finally got my hands on a windows computer and used the Odin way. Thanks for your help though.
Sent from my SAMSUNG-SGH-I717 using Tapatalk 2
but to answer your question, zips cannot be flashed from stock recovery without being properly signed....And Samsung are the only ones with the signing tool.
so if you try and flash a zip from 3e recovery, you will get that verification error.
And Joe, he was trying to flash cwm with a zip, and then the su zip. And was failing to get cwm.
studacris said:
but to answer your question, zips cannot be flashed from stock recovery without being properly signed....And Samsung are the only ones with the signing tool.
so if you try and flash a zip from 3e recovery, you will get that verification error.
And Joe, he was trying to flash cwm with a zip, and then the su zip. And was failing to get cwm.
Click to expand...
Click to collapse
thx i was trying to fig out what he was saying...as usual i got lost, thx stud...let's see what the op fig outs
Studa if you would, pronounced stooooda
Although i am pretty studly, don't call me stud
http://forum.xda-developers.com/showthread.php?t=1763896
Sent from my SAMSUNG-SGH-I717 using xda premium

[Q] Why can't i install the original ROM for my OPPO R831

ok ,,, iam new so easy in saying complex words
my CWM is : rua1 autoCWM V5.5.0.4 FOR r831k
the ROM that i was trying to install is from """""" oppo.com.ph/download/oppo-neo-3/#contentupgrade """""""
when i go to "install zip from sdcard"-->"choose zip from sdcard"--> i pick the rom that i downloaded --> then it said :
finding update package...
opening update package...
installing update...
assert failed:getprop("ro.product.device") == "
OPPO72_ 14079"
E:Error in /sdcard/R831K_11.A.08_OTA_INT_008_all
_140704 (1).zip
(status 7)
Installation aborted.
is my phone brick ??
how can i fix my phone??
help ,,, i need my phone back A.S.A.P
jhonpritse said:
ok ,,, iam new so easy in saying complex words
my CWM is : rua1 autoCWM V5.5.0.4 FOR r831k
the ROM that i was trying to install is from """""" oppo.com.ph/download/oppo-neo-3/#contentupgrade """""""
when i go to "install zip from sdcard"-->"choose zip from sdcard"--> i pick the rom that i downloaded --> then it said :
finding update package...
opening update package...
installing update...
assert failed:getprop("ro.product.device") == "
OPPO72_ 14079"
E:Error in /sdcard/R831K_11.A.08_OTA_INT_008_all
_140704 (1).zip
(status 7)
Installation aborted.
is my phone brick ??
how can i fix my phone??
help ,,, i need my phone back A.S.A.P
Click to expand...
Click to collapse
Well, a few potential issues I see...
1) You're trying to install a stock rom from the OEM on a custom recovery
2) Your CWM is out of date for newer versions of Android
3) Your build.prop (located in /system) has a different product code which is why it gives you the Status 7 error
Haven't played with that particular phone, since it isn't offered where I live, but quite certain the main issue is number 1. OEM updates are meant to go through the stock recovery.
es0tericcha0s said:
Well, a few potential issues I see...
1) You're trying to install a stock rom from the OEM on a custom recovery
2) Your CWM is out of date for newer versions of Android
3) Your build.prop (located in /system) has a different product code which is why it gives you the Status 7 error
Haven't played with that particular phone, since it isn't offered where I live, but quite certain the main issue is number 1. OEM updates are meant to go through the stock recovery.
Click to expand...
Click to collapse
can you at least guide me on how to fix my phone ?
as i said iam new and i dont now complex words,,,
tnx by the way
can any body help me ????
Did you even bother to look into what I told you or you're just waiting for someone to hold your hand through everything? Put the stock recovery back on and try again.
iam a noob
es0tericcha0s said:
Did you even bother to look into what I told you or you're just waiting for someone to hold your hand through everything? Put the stock recovery back on and try again.
Click to expand...
Click to collapse
iam a noob when it come to this topic , pls help me ?
jhonpritse said:
iam a noob when it come to this topic , pls help me ?
Click to expand...
Click to collapse
So now I'm confused... You already have CWM installed, so obviously you've been through the process of installing a recovery. So you just need to find the stock recovery and install it and try the update zip again. You can't accept official updates when you are using a custom recovery. This is the same with EVERY android device. I really can't break it down any simpler as this is the most basic way of saying it.
uninstall cwm
es0tericcha0s said:
So now I'm confused... You already have CWM installed, so obviously you've been through the process of installing a recovery. So you just need to find the stock recovery and install it and try the update zip again. You can't accept official updates when you are using a custom recovery. This is the same with EVERY android device. I really can't break it down any simpler as this is the most basic way of saying it.
Click to expand...
Click to collapse
i researching about how to uninstall clockworkmod recovery but i can find the ans.
what should i do ?
jhonpritse said:
i researching about how to uninstall clockworkmod recovery but i can find the ans.
what should i do ?
Click to expand...
Click to collapse
1) Find the stock recovery
2) Install
3) Install stock rom
http://translate.google.com/transla...m.coloros.vn/thread-2042-1-1.html&prev=search
es0tericcha0s said:
1) Find the stock recovery
2) Install
3) Install stock rom
http://translate.google.com/transla...m.coloros.vn/thread-2042-1-1.html&prev=search
Click to expand...
Click to collapse
can you help me out ,,,
i was googling about oppo neo 3 original stock rom but i can't find any legit source .....
i really need my phone back ,,,,
HELP
jhonpritse said:
can you help me out ,,,
i was googling about oppo neo 3 original stock rom but i can't find any legit source .....
i really need my phone back ,,,,
HELP
Click to expand...
Click to collapse
You already have the stock rom, which you mentioned on the 1st post. This kind of thing seems a bit over your head. You might want to see if there is a competent shop around you that can help you with this before you make it worse...

Categories

Resources