Ok folks. If you are like me, you searched all over the web didnt find a definitive answer on how to go about getting your HTC rezound to Pageplus.
I bought a used Rezound. It came with NO Verizon SIM card. No software updates to it. I read a lot, sounded like getting to the latest stock was a good idea as it usually fixes issues. Well, I promptly updated to the leaked global ICS rom. Go the rom from android police dated Aug 15.
So my rezound had locked stock global ICS rom, no SIM card. Here is how i flashed it to pageplus. Please follow the steps as mentioned, as i have stumbled too many times and got it working.
================================
Not a must but...
1. Dont upgrade your phone to ICS rom if you dont want to root your phone. As ICS blocks APN updates. Meaning if you need 3g on pageplus or any other carrier and you dont want to root your phone, dont upgrade. If you dont mind rooting your phone, you can just ignore this warning.
Requirements:
MIN and MDN Information:
You can get MIN and MDN by calling pageplus or follow steps below.
goto http://www.kittywireless.com/pageplus/phonestatusform.html
right at the bottom you can enter email and phone number. You will get an email with MIN and MDN information.
OS Requirement:
Windows 7 64bit or 32bit. No support for Linux, Mac or XP(??).
Software you will need:
1. HTC Sync http://www.htc.com/us/support/htc-rezound-verizon/software-updates.
2. HTC Diag drivers. You can download from below.
3. QPST. http://conflipper.com/Software/QPST_2.7_366.rar
4. CDMA Workshop. You need the full version. Demo is not useful. There is an old 2.7 cracked version floating around in the web. That will do the job.
Steps to follow:
1. Install HTC Sync. This software will install HTC Sync and HTC Drivers. All you are looking for is HTC Drivers. So, as soon as installation is complete you can uninstall HTC Sync alone. They have seperate uninstallers.
2. Install HTC Diag drivers. Now, i hope you have access to Windows 7. These drivers didnt install in XP for me. it could work for you.
This step is crucial, without these drivers installed you wont be able to do anything.
i. Connect your phone to PC.
ii. Just leave it on charge mode. The HTC drivers you installed in previous step should recognize the phone.
iii. Goto the dialer in phone. dial ##3424. press call. This should put the phone in DM mode.
iv. Win 7 will try to find the drivers and fail. If you open the device manager (or short cut just run devmgmt.msc), you should see the
2 devices with no drivers. HTC DIAG and HTC DIAG 9K.
v. double click on HTC Diag and click upgrade drivers. You need to manually upgrade the drivers..
http://forum.xda-developers.com/showthread.php?t=697487 This guide does a very good job. I dont want to repeat it. You can look at it if you are stuck. Just look at the driver installation part alone.
vi. Just ignore the HTC Diag 9k for now.
3. You have done a major step already. (I got stuck on step 2 for quiet sometime.). Install cdma workshop(CDMAWS). This software will trip anti-virus software(AV). So, just turn-off AV( or add CDMAWS in your AV's exclusion list). Apparently CDMAWS does use the virus technique to work but it is not malicious.
i. connect the phone to PC and dial ##3424 for DM mode. Find out which COM port your phone is using to connect.
ii. start CDMAWS. Select the COM port you phone uses. click connect. These should be in the topline of the GUI.
iii. if you are connected. The status bar at the bottom of window should indicate it. If everything is fine, click read(it should be next to connect/disconnect button). If everything is working so far, lots of empty spaces will be populated with data.
iv. switch to the Security tab. look for a spc button. enter "000000" in the text box above it(dont include quotes). This is the password for EPST. click spc -> spc send. you should see a pop-up saying phone unlocked. (if you are using this guide for Sprint phones, you need to obtain this password). Verizon just leaves it unlocked.
v. goto 'other' tab. look for RU-IM. click on the drop-down box. Select "NV-only". This option will be present only in full version.
vi. if you have not downloaded the attachment on this post, do it now. Now focus your attention on PRL box in the same tab as in step v.
PRL stands for preferred raoming list. I have attached 2 prl files. For me the 51720-evdo.prl gave roaming sign. I used 52711.prl, it worked fine. Click on write and choose 52711.prl from you download directory. It should write, the information to your phone.
vii. next switch to NAM tab. Enter the MIN you got from the email you got from kitty wireless (link is provided above). You can also get that info from pageplus by calling. MDN is nothing but your cell number. Enter that in dir or directory text box. click write.
4. you are done with CDMAWS. you can reboot your phone. At this point, if you havent changed ESN with pageplus do so now. You can do ESN change through online chat at pageplus website. It is free.
5. If you see roaming sign on your rezound, you need to use a different PRL. Roaming is indicated by a small triangle above the signal bars. start CDMAWS and select a different PRL file to write to your phone(steps 3(i) - 3(vi)). If everything is fine, from you rezound, call *22890 to program your phone. You can also use *22801 to program. if after a short pause it says unable to program your phone. It failed to program. Make sure you followed all the steps. If after a long pause it says unable to program. you have succeeded in getting the phone registered with pageplus. Now you should have your phone working for Voice and SMS/texting.
6. Take a deep breath and pat yourself, you have achieved a major step. Now to program 3g part. As i said before, if you are having locked stock ICS rom, you wont be able to go further. ICS doesn't let changing APNs. GB is fine with changing APNs. I havent rooted my ICS. i am just happy with a working Voice and SMS for my needs. Wifi satisfies my need.
7. Fire up QPST configuration.
i. Click on "Add New Port..." Select the port your device is on. It should be same as in CDMAWS.
ii. On the next screen highlight your device.
iii. Click on "Start Clients--Service Programming"
iv. Click 'Read From phone" When the prompt pops up click "OK"
v. Now tab over to "M.IP"
vi. In the drop down below that says simple ip+Mobi change that to "Simple IP"
vii. Now double click on "Profile 2"
viii.In the "NAI" section put your phone [email protected]
ix. In the "tetheredNAI" section put your phone [email protected]
x. For the IP Address put 255 all the way across for the last two sections and leave the 0's in the first section and Click OK
xi. Now click on "PPP config"
xii. Click "Um"
xiii. In the box that says "User ID", Enter your phone [email protected]
xiv. Click in the box that says "Tethered NAI", Enter your phone [email protected]
xv. Click in the box that says "Password", Enter "vzw"
xvi. Click the "AN" tab, User ID is your phone [email protected] and Password is "vzw"
xvii. Click "write to phone"
8. Power your phone down then reboot it.
9. i. Connect to wifi
ii. Open market
iii. Search for "APN Backup and Restore" and install. If you have GB, this will work on it own. Now if you have a rooted ICS, you can use Titanium Backup pro to run this system app. ICS allows system apps to modify APNs.
iv. Open APN and click Backup APN's
v. Now put your phone in "airplane mode"
vi. Click "delete apn's"
vii. Click "restore apn"
viii. Select page plus apn from below
ix. Disable Airplane Mode
x. Reboot
And thats it your fully flashed with MMS, Talk, Text, 3G
Credit goes to lots of folks. Mainly to Nevell, techwerkz, folks at howard forums and scores of others who are not mentioned.
Hope this helps a few folks.
Great guide.
hey guys, im kinda new to this and im planning to switch from VM to PP. I am plannng to buy the HTC Rezound. When i buy it, do i have to buy the contract version or the "month to month" version on the verizon site?? And does this tutorial actually work? Can anyone confirm it? And i dont care about 3g or 4g so i just want talk and text/
vwade79 said:
hey guys, im kinda new to this and im planning to switch from VM to PP. I am plannng to buy the HTC Rezound. When i buy it, do i have to buy the contract version or the "month to month" version on the verizon site?? And does this tutorial actually work? Can anyone confirm it? And i dont care about 3g or 4g so i just want talk and text/
Click to expand...
Click to collapse
Im thinking of selling mine soon. PM me if your interested.
Sent from my Nexus 7 using Tapatalk 2
I got 3G data working on stock ICS 4.0.3.605.1
To make it work you need to write all necessary settings to the 9K port as well. The tricky part is that QPST will not work and you have to use full paid version of CDMA Workshop or DFS (free version is ok) instead.
Repeat steps 3 and 4 of javamaan's guide for port 9k and use DFS for step 7.
Go to Programming/Data. Fill all fields in PAP, PPP, HDR AN, HDR AN Long and HDR AN PPP boxes. Set HDR SCP force AT config to RevA_MFPA. Uncheck eHRPD enabled. Go to Mobile IP and set NAI to [email protected].
When writing, make sure that it actually writes the data. Enable full logging and see if green "nv item written ok" messages appear. Ignore offline-d errors.
For more detailed instructions, see this cricket flashing guide.
You also need to have any sim card inserted to enable Mobile network Off/On switch in settings and get rid of the annoying message on the lock screen.
APN settings have no effect in CDMA mode. I've never touched APN menu and data works just fine.
The only thing it might be necessary is MMS, but I've never bothered to set it up.
Hello all,
For the life of me, I can't get sms or 3g to work. I've gone over this tutorial over and backwards and even did the cricket tut.
My rezound is on GB. I downgraded it with the official, stock, OTA or what ever you want to call it GB. I'm rooted but not custom ROM. I just got rid of the bloatware.
I have PPC service. Thanks, that part was great! There is a "write" line missing in the RU IM part, but I figured it out. Voice and simple text work but no sms. I even copied my wife's apn from her cell, but still, no go.
OK, done with my rant. Just had to let it out. So my steps:
in QPST - wrote everything to 8K as stated above, to the "t"
-I did come up with an error, but checked it in DFS and everything was there.
in DFS - wrote everything to 9k as stated above, to the "t"
Found the apn file from another thread because it is missing in this one. Did a restore, and.....nothing.
Found the apn settings from another site and entered it in manually......nothing.
Copied my wife's apn settings...nothing.
Made myself a drink...at least I have a good buzz going...check my phone...nothing...DOHHH!
What do I do now???
Cheers!
AsianCajun said:
Hello all,
For the life of me, I can't get sms or 3g to work.
Click to expand...
Click to collapse
As already mentioned above, forget about the APNs! They are not used for CDMA mode (except MMS). Until you have 3G data, just leave the default VZWINTERNET APN as it is.
You don't need to downgrade to GingerBread. I've done everything on ICS 4.0.3.605.1, but 4.0.3.605.2 should work as well.
Make sure you've actually written everything to both ports. Especially 9K port. Read back and check if all values are there (except passwords that can't be read). Read PRL and make sure that version is 51720.
Post your screenshots of DFS after you read the data (NAM/PRL, Data and MobileIP pages).
OK, I wrote the prl over again and opened up DFS and wrote to nam1 and nam2.
Well, I was able to get it to work. I put ics back on, updated to one of the newer prl's and put a sim chip. I'm not sure what did the trick, but my bet is on the chip. note* I used an old at&t sim chip that I had laying around. I still get the warning on the lock scene, but that doesn't bother me. Thanks again to those who made these tuts.
Cheers
Im getting close to getting my Rez up on PP,... (deleted)
EDIT: Thanks so much for this thread, Im well on my way, with a few bumps along the way while I learn the software and phone. was stuck at step 5 til I realized you did the programming and dont need the #22890. with or w/o my new sim, I can make & receive calls/texts. Im barred from the ota programming by the phone.
Now I'm figuring out qpst as to why it doesnt show profile 2, just a single profile (0). So I dont know if I should modify that profile 0... And I need to get rid of the error message re the 4g activation. So i'm a little ways from having any data functioning... going to bed, sleepy and cross-eyed...
"Activating your phone..."
In the lock screen, how do you remove the irritating "Activating your phone..." message. I have everything working except MMS, but I don't care about it, I just want the stupid notification gone.
I also have an LTE card installed. I had remotesquaD flash it for me...
HTC Rezound on PagePlus no 3G data
javamaan said:
Ok folks. If you are like me, you searched all over the web didnt find a definitive answer on how to go about getting your HTC rezound to Pageplus.
I bought a used Rezound. It came with NO Verizon SIM card. No software updates to it. I read a lot, sounded like getting to the latest stock was a good idea as it usually fixes issues. Well, I promptly updated to the leaked global ICS rom. Go the rom from android police dated Aug 15.
So my rezound had locked stock global ICS rom, no SIM card. Here is how i flashed it to pageplus. Please follow the steps as mentioned, as i have stumbled too many times and got it working.
================================
Not a must but...
1. Dont upgrade your phone to ICS rom if you dont want to root your phone. As ICS blocks APN updates. Meaning if you need 3g on pageplus or any other carrier and you dont want to root your phone, dont upgrade. If you dont mind rooting your phone, you can just ignore this warning.
Requirements:
MIN and MDN Information:
You can get MIN and MDN by calling pageplus or follow steps below.
goto http://www.kittywireless.com/pageplus/phonestatusform.html
right at the bottom you can enter email and phone number. You will get an email with MIN and MDN information.
OS Requirement:
Windows 7 64bit or 32bit. No support for Linux, Mac or XP(??).
Software you will need:
1. HTC Sync http://www.htc.com/us/support/htc-rezound-verizon/software-updates.
2. HTC Diag drivers. You can download from below.
3. QPST. http://conflipper.com/Software/QPST_2.7_366.rar
4. CDMA Workshop. You need the full version. Demo is not useful. There is an old 2.7 cracked version floating around in the web. That will do the job.
Steps to follow:
1. Install HTC Sync. This software will install HTC Sync and HTC Drivers. All you are looking for is HTC Drivers. So, as soon as installation is complete you can uninstall HTC Sync alone. They have seperate uninstallers.
2. Install HTC Diag drivers. Now, i hope you have access to Windows 7. These drivers didnt install in XP for me. it could work for you.
This step is crucial, without these drivers installed you wont be able to do anything.
i. Connect your phone to PC.
ii. Just leave it on charge mode. The HTC drivers you installed in previous step should recognize the phone.
iii. Goto the dialer in phone. dial ##3424. press call. This should put the phone in DM mode.
iv. Win 7 will try to find the drivers and fail. If you open the device manager (or short cut just run devmgmt.msc), you should see the
2 devices with no drivers. HTC DIAG and HTC DIAG 9K.
v. double click on HTC Diag and click upgrade drivers. You need to manually upgrade the drivers..
http://forum.xda-developers.com/showthread.php?t=697487 This guide does a very good job. I dont want to repeat it. You can look at it if you are stuck. Just look at the driver installation part alone.
vi. Just ignore the HTC Diag 9k for now.
3. You have done a major step already. (I got stuck on step 2 for quiet sometime.). Install cdma workshop(CDMAWS). This software will trip anti-virus software(AV). So, just turn-off AV( or add CDMAWS in your AV's exclusion list). Apparently CDMAWS does use the virus technique to work but it is not malicious.
i. connect the phone to PC and dial ##3424 for DM mode. Find out which COM port your phone is using to connect.
ii. start CDMAWS. Select the COM port you phone uses. click connect. These should be in the topline of the GUI.
iii. if you are connected. The status bar at the bottom of window should indicate it. If everything is fine, click read(it should be next to connect/disconnect button). If everything is working so far, lots of empty spaces will be populated with data.
iv. switch to the Security tab. look for a spc button. enter "000000" in the text box above it(dont include quotes). This is the password for EPST. click spc -> spc send. you should see a pop-up saying phone unlocked. (if you are using this guide for Sprint phones, you need to obtain this password). Verizon just leaves it unlocked.
v. goto 'other' tab. look for RU-IM. click on the drop-down box. Select "NV-only". This option will be present only in full version.
vi. if you have not downloaded the attachment on this post, do it now. Now focus your attention on PRL box in the same tab as in step v.
PRL stands for preferred raoming list. I have attached 2 prl files. For me the 51720-evdo.prl gave roaming sign. I used 52711.prl, it worked fine. Click on write and choose 52711.prl from you download directory. It should write, the information to your phone.
vii. next switch to NAM tab. Enter the MIN you got from the email you got from kitty wireless (link is provided above). You can also get that info from pageplus by calling. MDN is nothing but your cell number. Enter that in dir or directory text box. click write.
4. you are done with CDMAWS. you can reboot your phone. At this point, if you havent changed ESN with pageplus do so now. You can do ESN change through online chat at pageplus website. It is free.
5. If you see roaming sign on your rezound, you need to use a different PRL. Roaming is indicated by a small triangle above the signal bars. start CDMAWS and select a different PRL file to write to your phone(steps 3(i) - 3(vi)). If everything is fine, from you rezound, call *22890 to program your phone. You can also use *22801 to program. if after a short pause it says unable to program your phone. It failed to program. Make sure you followed all the steps. If after a long pause it says unable to program. you have succeeded in getting the phone registered with pageplus. Now you should have your phone working for Voice and SMS/texting.
6. Take a deep breath and pat yourself, you have achieved a major step. Now to program 3g part. As i said before, if you are having locked stock ICS rom, you wont be able to go further. ICS doesn't let changing APNs. GB is fine with changing APNs. I havent rooted my ICS. i am just happy with a working Voice and SMS for my needs. Wifi satisfies my need.
7. Fire up QPST configuration.
i. Click on "Add New Port..." Select the port your device is on. It should be same as in CDMAWS.
ii. On the next screen highlight your device.
iii. Click on "Start Clients--Service Programming"
iv. Click 'Read From phone" When the prompt pops up click "OK"
v. Now tab over to "M.IP"
vi. In the drop down below that says simple ip+Mobi change that to "Simple IP"
vii. Now double click on "Profile 2"
viii.In the "NAI" section put your phone [email protected]
ix. In the "tetheredNAI" section put your phone [email protected]
x. For the IP Address put 255 all the way across for the last two sections and leave the 0's in the first section and Click OK
xi. Now click on "PPP config"
xii. Click "Um"
xiii. In the box that says "User ID", Enter your phone [email protected]
xiv. Click in the box that says "Tethered NAI", Enter your phone [email protected]
xv. Click in the box that says "Password", Enter "vzw"
xvi. Click the "AN" tab, User ID is your phone [email protected] and Password is "vzw"
xvii. Click "write to phone"
8. Power your phone down then reboot it.
9. i. Connect to wifi
ii. Open market
iii. Search for "APN Backup and Restore" and install. If you have GB, this will work on it own. Now if you have a rooted ICS, you can use Titanium Backup pro to run this system app. ICS allows system apps to modify APNs.
iv. Open APN and click Backup APN's
v. Now put your phone in "airplane mode"
vi. Click "delete apn's"
vii. Click "restore apn"
viii. Select page plus apn from below
ix. Disable Airplane Mode
x. Reboot
And thats it your fully flashed with MMS, Talk, Text, 3G
Credit goes to lots of folks. Mainly to Nevell, techwerkz, folks at howard forums and scores of others who are not mentioned.
Hope this helps a few folks.
Click to expand...
Click to collapse
Hello everyone, I am new to this forum and first thing I want to do is thank everyone for their time and effort of putting the useful information on this forum! Also thanks to javamaan, I have been able to activate my HTC Rezound (previously on Verizon) on PagePlus. I have the following working: Talk, TXT, MMS, and 1X data. But no matter what I do, (spent over a week on this now, no kidding) I can't get 3G working.
I have the original Verizon 4GLTE sim card installed.
I am S-OFF, rooted, running leaked android 4.0.3 (4.03.605.3). (QPST is only good for 8K port)
I use mostly CDMAWS 3.8.7 demo and DFS 4.0.0.5 to manipulate data.
I write same data values to 8K and 9K ports, to NAM1 and NAM2.
Could it have something to do with HA and AAA shared secret values? some say leave it blank, some say 'vzw' (in hex), some say need to get those off of a donor phone.....
Could it be that when writing any passwords in DFS for 9K port they don't seem to showup/stick?
Thank you!
-snpiee
Wileyworld said:
Im getting close to getting my Rez up on PP, but am stuck on (step 5) since I cant dial out to program phone
Click to expand...
Click to collapse
I never could get *228xx activation to work. Just filled all data manually.
You can try to insert some other sim card, like AT&T or whatever. It just wants to have something in the slot.
@ Wileywold:
Step 5 is just if you get the triangle by the signal bars. *228 in any form will give you that error. I followed yura's directions and programmed for the mms and 3g using DFS.
@ snpiee:
On my phone HA is 300 and AAA is 2. Like you, I don't know if that has anything to do with programming or not. I've tried different prls and still can't get 3g to show up. I'm also stuck on 1x.
snpiee said:
Could it have something to do with HA and AAA shared secret values? some say leave it blank, some say 'vzw' (in hex), some say need to get those off of a donor phone.....
Click to expand...
Click to collapse
You definitely don't need a donor phone. As I recall, I did "vzw". Actually, all that Mobile IP NAI stuff is not used if "Simple IP only" is selected.
Also, someone suggested to do a software reset with 4G SIM inside after writing all values. Not sure if it really helps, but you can try.
snpiee said:
Could it be that when writing any passwords in DFS for 9K port they don't seem to showup/stick?
Click to expand...
Click to collapse
Passwords don't show up when I read back after writing, so this is OK.
Check PRL version and other stuff.
---------- Post added at 10:10 PM ---------- Previous post was at 09:59 PM ----------
AsianCajun said:
I've tried different prls and still can't get 3g to show up. I'm also stuck on 1x.
Click to expand...
Click to collapse
Oh, I thought you finally got 3G... I will go make my DFS screenshots now, so we can compare.
I just updated my prl to 52874 hoping it would point my Rez to 3g towers. Well, I'm still on 1x.
Screenshots of 9K port. I've highlighted some important items.
I finally got it. I wrote to both 8K and 9K ports and NAM1 and NAM2. All values were the same. My prl is the most recent verizon from my area, which is 52874. Here are the screen shots.
Thanks again to yura and javamaan for their hard work!
AsianCajun said:
I finally got it. I wrote to both 8K and 9K ports and NAM1 and NAM2. All values were the same. My prl is the most recent verizon from my area, which is 52874. Here are the screen shots.
Thanks again to yura and javamaan for their hard work!
Click to expand...
Click to collapse
You got 3G working now? I will compare your values to mine when I get home today....
Thanks for posting DFS screenshots!
By the way in your pics you use PrefMobileIP not SimpleIP is that correct?
Yura80 said: "Screenshots of 9K port. I've highlighted some important items."
Thanks for kindly sharing help here! I continue to tinker with this by lurking here and (after success with voice/texts/1x data) I'm now working on getting the 3g operating, and the dfs screen shots are very helpful. I want to upload a few for someone to see, and point me closer to my goal. Ive tried to imitate yours, but im running dfs 3.1.xxx and there are a few differences in the location of items, and labeled a bit different. I had to guess at one of the places to insert the dun info since it didnt show quite the same layout of lines/descriptions.For example, PAP has an extra line called data, while the PPP section has 1 less line , so I tried the dun line in that PAP section.
I'm very close to having this thing DONE and I never would have gotten here without great tutors right here!
BTW, What do you use to get the great screen shots to insert here in the forum?
Hi guys. As you might know the HTC Rezound has the same SOC as the I-717. We are trying to make it work with att hspa, and have up to a point, but have some issues. These issues could be solved by using the RF and NV data from the i-717. It is easy and free to get them.
The approximate steps are, mind you I am guessing in a few places because I do not have a Note:
Download and install the diagnostic drivers for your device.
Download DFS CDMA Tool (free version).
Connect phone to PC and switch it to the DM mode. If you download Hidden Menus from the market it can help you with putting it in Diagnostic Mode (DM).
Connect DFS to the first Diagnostic Interface port, not the LTE port. The Rezound has the LTE port labeled as 9K.
At the Equipment page check if Extended Build ID / MSM rev is MSM8660. If it's different, you've selected a wrong port.
Click Send SPC button to send SPC 000000 (Top left)
Go to NV page
Read Range and Save.
Read RF and Save.
The last two steps can take a few minutes to complete. Please make sure to have an active sim and make sure the phone doesn't disconnect.
Upload the files enjoy the thanks you will receive.
Thank you in advance.
Bump???
We really need this to get a hack for us rezound users to get fully functional gsm capabilities for att us. Getting the nv tables from an i-717 device will hopefully point us in the right direction. Thank you in advance to whoever is willing to help.
Also keep in mind that getting this info has no negative impact on your phone. There will be no modifying or anything so you don't have to worry about "bricking" your device.
Sent from my Rezound using Tapatalk 2
Bumping this...A lot of people in this thread are desperate and development has totally stagnated because of the lack of data from the Note 1. Any help is greatly appreciated!
I got the message in inbox. Just responding now to tell you all that I am currently really swamped! I have not even been building my current roms for over a week. If I should get a minute or 10 this weekend??? I can have a better look at your OP here......
EDIT:
you might provide a link to these:
Download and install the diagnostic drivers for your device.
Download DFS CDMA Tool (free version).
If you want help here....
Thanks!!
patch_Adams said:
I got the message in inbox. Just responding now to tell you all that I am currently really swamped! I have not even been building my current roms for over a week. If I should get a minute or 10 this weekend??? I can have a better look at your OP here......
EDIT:
you might provide a link to these:
Download and install the diagnostic drivers for your device.
Download DFS CDMA Tool (free version).
If you want help here....
Thanks!!
Click to expand...
Click to collapse
Here are detailed instructions that I wrote out to someone else looking to help. I will PM them to you.
Sorry, the guy who wrote the request probably didn't think that your phone may be different...neither did I. Here are some cleaned up instructions. Since I don't have the phone, I can't be sure that they will work. This is perfectly safe, as you are only reading the data and saving it. As long as you don't start mashing your mouse clicker on random buttons And it can't hurt to have this backup around, should anything go haywire on your phone.
DFS: http://cdmatool.com/downloadFiles/application/Setup DFS 14.04.27.0.zip
Samsung USB Drivers: http://forum.xda-developers.com/showthread.php?t=2645355
1. Dial #7284# (Phone Util). If this doesn't work you can use the "Hidden Menus" app from the Play Store to locate it. Go to Qualcomm USB Settings. Note the default selection (MTP + ADB most likely) as you will want to return to this mode when you're done..Select "RNDIS + DM + MODEM". <--- I got this from a Note 2 tutorial, but it should be essentially the same. It may be called RMNET + DM + MODEM
2. Connect your phone to your PC. With the drivers installed it should detect your phone properly.Go to "Device Manager" in Windows, expand the COM/Ports list and you should see something to the tune of: "Samsung Mobile USB Port COM---x---". Take note of the COM number listed here.
.
3. Open DFS. If a login/purchase windows comes up, exit it and the main program should load.
4. Click Ports at the top left. There should be a few options. If you don't see the COM port that you noted before, click "Add Port", choose "Serial" from the drop down, and enter "COMx" where x is that special ole number, and hti "Add Port"
5. Double click the new COM port and you should see your phone info pop up near the bottom of the window.
6. Exit the port window and look at the main Equipment page, ensure that Extended Build ID / MSM rev is MSM8660. This will ensure you have the right COM port. If it is not MSM8660, try double clicking the other ports.
7. Click the "Send SPC" at the top left button to send SPC 000000. Don't worry about editing the SPC info.
8. Go to the NV tab. Click the "Read Range" button. It may take a minute for the list to populate. The status bar at the bottom will be solid while it's reading, and start slowly scrolling again when it's done. If nothing happens, try sending SPC again.
9. Once it's done, click "Save" and it will save a .nv file, This is the one we're looking for. It should be 200-300kb. If it's not, the COM port is probably incorrect.
10. Just incase, try clicking "Read RF" as well, and saving this file too. It will probably end up being the same exact thing but it can't hurt. It will try to save it as the same filename, so just label it "RF".
11. Go back into the #7284# menu and re-select MTP + ADB (or if it was different, whatever the default selection was in the first step).
That's that. I mingle together the instructions from what I've found about Samsung phones so I can only hope it will work out. If DFS isn't working out for whatever reason, these instructions should work for your phone: http://forum.xda-developers.com/showthread.php?t=1804117
It will just dump a text file of the NV data which will be a monster to interpret, but it can't hurt.
Thanks a ton again, and good luck.
Hey guys,
I ran the Suckit Verizon boot unlocker exploit, and it was successful. At which point I used TW Recovery to flash Android Revolution HD 8.0 (N7100 ROM). My phone wouldn't connect to the Verizon network, saying I did not insert the proper SIM card. I found this strange, but realized Verizon locks their network to international phones. I then used the Verizon Toolkit to flash back to stock recovery and ROM. After doing so, I still had no luck in activating my phone.
I called tech support (now having stock everything) and they told me it was likely my SIM card. After spending 2 hours at the store today, it is clearly not the SIM card. They have no idea what the problem is...
When I flashed Android Revolution, I wiped my efs. Could that be the problem? Is it possible to flash a new EFS or COM3? I have no clue how to reactivate to the network..
Anyone have this problem? I did a search on both Suckit Verizon and the Verizon toolkit thread and no one appeared to suffer from this. Please help! Any solutions are greatly appreciated. Thanks in advance. Will update if those guys at Verizon come through.
Definitely has to do with wiping my EFS and not saving it. Under Settings > About > Status IMEI is unknown as well as all other carrier info.
Can someone send me their EFS or is their a way to restore the EFS without having backed it up?
Flash the full Odin restore image and that should fix the problem. Note, it will wipe your data and re-lock the bootloader, but it should at least connect to the network again.
If the stock Odin doesn't work since your imei is unknown this may be what you need, but listen to imnuts first
http://forum.xda-developers.com/showthread.php?p=36163537
Sent from my SCH-I605 (AKA NOTE 2)
kintwofan said:
If the stock Odin doesn't work since your imei is unknown this may be what you need, but listen to imnuts first
http://forum.xda-developers.com/showthread.php?p=36163537
Sent from my SCH-I605 (AKA NOTE 2)
Click to expand...
Click to collapse
Flashed stock rom. No luck. Now I have to root back, as one of the prerequisites is being rooted. Will get back.
I kind of had this same problem right after I rooted/unlocked and before flashing any ROMs. I was getting signal bars but kept getting a cannot connect to network error every time I tried to place a call. I called customer service and they "reset" my account, whatever that means but it still didn't work. Started driving to the Verizon store and decided to try one last factory reset and it started working! An IT guy at my work said the account reset plus factory reset got my device sync'd with Verizon signal again. Don't know if what he said is true...don't know why it worked...don't know if this will help you but I thought I would share my experience. I know what you are going through so good luck!
Sent from my SCH-I605 using xda app-developers app
I had almost the same problem using MIUI for AT&T's variant. I was able to get most functionality back by accessing the hidden menu and doing the ##RTN#, but still cannot get 4G LTE back. Maybe this will help you get started too.
http://forum.xda-developers.com/showthread.php?p=36163537
According to the OP instructions - which I have done entirely correct. Put phone in Debugging, Went to Qualcomm settings in Hidden menu and set to "RMNET + DM + MODEM" , connected to the proper COM port, clicked the READ on top, however when I go to click the second read to populate the information -> Says cannot set device into DM mode.
The instructions and accompanied video do not reference having to place the device into DM mode at all. The fact that I am getting this error message is also a unique problem.
Anyone know what this could mean or how to fix it? Could it be due to the USB Qualcomm settings not "taking or shifting", although it does confirm that I changed by saying "Saved"
Also, can Verizon Wireless sync my IMEI in store if I bring the original box with the IMEI barcode on it ? Can they flash / scan it to the phone?
anybody?
Can Verizon Wireless sync my IMEI in store if I bring the original box with the IMEI barcode on it ? Can they flash / scan it to the phone?
I know with a fact that the stores do not carry any flashing software for any smartphones. So there is nothing they can do.
Sent from my SCH-I605 using Tapatalk 2
Hi all,
Alright so this is going to be a long post. So I recently flashed my phone to the U1 firmware, I currently have an unrooted Verizon Unlocked Samsung S9+. I wanted to switch phone carriers over to Visible (subsidiary of Verizon), here are the order of events that occurred:
1. Visible's website says that my device in not compatible using their IMEI checker, there is a solution that was found on reddit about flashing the device on the U1 firmware.
2. I flashed the device on the U1 firmware using Odin and the Visible SIM card worked as expected. No issues with the flash
3. Data/Texts etc.. are all working as expected. Except for Voicemail.
When I try to check my Voicemail, it is acting as if it's still on the Verizon Voicemail system. It says "Welcome to the message management system, please enter your mailbox number". No one can leave me a VM either because of this. I tried several different combinations of numbers, including my full 10 digit cell number and last 4, to which it says "XXX is not a valid mailbox number", which would be because my number is no longer active on Verizon, so it's unable to access it. Which makes sense. The Visible Customer Care team tried the following:
1. Provisioning my VM multiple times
2. Take out SIM card, turn phone off for 1 min, insert SIM card again, and toggle airplane mode for 30 seconds
3. Reset network settings
After numerous days of troubleshooting with them, eventually they said it was because my device isn't compatible, ok, I can't argue with that. I have not seen anyone else experiencing this issue that had flashed their phone to U1 firmware.
After trying all of this with them, I eventually factory reset my device, hoping that might do something. That still did not work.
My questions is, is there something I missed with flashing the U1 firmware? Why is it still using Verizon's VM system even though I flashed it to U1? Is there any way to fix this? Any help is greatly appreciated, and please don't hesitate if you need any other information.
bornxawkward said:
Hi all,
Alright so this is going to be a long post. So I recently flashed my phone to the U1 firmware, I currently have an unrooted Verizon Unlocked Samsung S9+. I wanted to switch phone carriers over to Visible (subsidiary of Verizon), here are the order of events that occurred:
1. Visible's website says that my device in not compatible using their IMEI checker, there is a solution that was found on reddit about flashing the device on the U1 firmware.
2. I flashed the device on the U1 firmware using Odin and the Visible SIM card worked as expected. No issues with the flash
3. Data/Texts etc.. are all working as expected. Except for Voicemail.
When I try to check my Voicemail, it is acting as if it's still on the Verizon Voicemail system. It says "Welcome to the message management system, please enter your mailbox number". No one can leave me a VM either because of this. I tried several different combinations of numbers, including my full 10 digit cell number and last 4, to which it says "XXX is not a valid mailbox number", which would be because my number is no longer active on Verizon, so it's unable to access it. Which makes sense. The Visible Customer Care team tried the following:
1. Provisioning my VM multiple times
2. Take out SIM card, turn phone off for 1 min, insert SIM card again, and toggle airplane mode for 30 seconds
3. Reset network settings
After numerous days of troubleshooting with them, eventually they said it was because my device isn't compatible, ok, I can't argue with that. I have not seen anyone else experiencing this issue that had flashed their phone to U1 firmware.
After trying all of this with them, I eventually factory reset my device, hoping that might do something. That still did not work.
My questions is, is there something I missed with flashing the U1 firmware? Why is it still using Verizon's VM system even though I flashed it to U1? Is there any way to fix this? Any help is greatly appreciated, and please don't hesitate if you need any other information.
Click to expand...
Click to collapse
Please check your voice mail settings in your phone app. See my screenshots.
There you should select the correct service provider and the Visible mailbox number.