My biggest issue that's bugging me right now is my home key(select) inside CWM is not working after flasshing VillainRom 3.0 . Has anyone ever had this happen to them? I've been browsing the forums for hours and can't find anyone with the same issue. I'm still searching.
I have been toying with my new SGS2 and I rooted it and tried out a few roms. I was anxious to try out VillainROM 3.0 for sgs2. I flashed the rom in CWM recovery. It booted up just fine. But now I can't make calls, connect to my carrier network/home network. My Menu/Home buttons don't work, back button works, search button brings up the menu... I've tried a few other roms and got the yellow triangle and was able to fix it by reflashing my backup in CWM using http://forum.xda-developers.com/showthread.php?t=1342728 .
I decided to stop looking for people with the same issue and try to get back to stock, I found this thread http://forum.xda-developers.com/showthread.php?t=1409634 . I'm crossing my fingers and hoping for the best.
That you can´t use the home button inside CMW, depends on the version you are using. The standard CWM version, does not support the homekey, therefore you can use the power putton.
You are in the wrong forum. You can't use I9100 roms on a Epic touch 4g device. Flash only roms for your device. That's why you can't make calls en buttons don't work anymore.
Thank you Lennyz1988. Anywho anyone who is dumb enough to try what I did can fix their problem with the link I posted in my first reply. I managed to get everything back up and running. I need to double check to make sure everything will work right next time I try out a new rom. I have had some success in flashing roms so far.
I am new to android so I'm trying to learn, and in the process jacked up my phone.
So I did something not so smart and updated my AT&T Galaxy S2 via these instructions:
androidauthority samsung-galaxy-s2-ice-cream-sandwich
(sorry it won't let me post the URL)
It actually worked, however, my back button doesn't work, and my search button doesn't work, I can make a call but can't hear anything and they can't hear me and vice versa.
I realized there are some samsung glaxy's out there that just have the home button, I figured I must have loaded one of those roms so I tried to load the "stock" rom to go back to where I was.
I can load the stock rom but when the phone boots up to the green android symbol startup wizard the phone just sends a cascade of errors one after another and you can't proceed any furhter.
So I went back to the orignial ICS from the post above, and the phone comes back up, only same problems but at least I can load it up and surf/get e-mail/text.
So I start playing around with mixing parts, and I find out that basebad is the "radio", and I can change that to different versions without changing the OS version, so I figure I must have some kind of mis match going on.
I used Odin and there is PIT, BOOTLOADER (I didn't touch bootloader) PDA PHONE and CSC.
Is it safe to assume if everything works but voice calls, that I need to find the right "phone" version? what about the back button and search buttons?
I have the "stock" PDA version, but I'm guessing that doesn't work because I need the matching PIT, and CSC? Where do/can I find those?
My phone shows network state connected, shows IMEI number and can surf the web but no voice, all other audio works.
Please help a newbie out, and help me understand what PIT, PDA/PHONE/CSC is all about so I can get my phone working again.
You're in the wrong forums flashing stuff for the wrong device.
Go to the AT&T Samsung Galaxy S II forums before someone here gives you some bad advice.
Clickme for the right forum.
i9100 roms need to be hellraised to work on the AT&T SGS2, as the audio blobs and keymappings wont work otherwise.
I've spent a couple days searching, but there doesn't appear to be a relevant enough thread to help me here, so I've resorted to asking for help, hopefully you guys can help me figure this out.
I got my girlfriend a used Telus SGH-T959D (same thing as the T-mobile version pretty well) several months back. It was on stock 2.1 and worked fine but was very laggy compared to my rooted HTC Desire on oxygen 2.3.2. So I rooted it and installed a 2.2 rom with Voodoo sound control (but no lagfix), and she's been using it this way for months now. It was better than stock but still laggy. I can't remember what rom it was but it was based on Samsuck firmware, hence why it's still laggy I guess.
For some reason, when I originally rooted it I had trouble with CWM recovery not installing, I can't even remember now what exactly was happening, but I managed to get the rom installed without a proper custom recovery, so when I go into recovery it's just the stock Samsung recovery, with no options for nandroid backup, restore, flash zip from sd card, etc. Basically I can't do anything useful in recovery.
Anyways lately, worse and worse she has been getting the Android text message to wrong recipient bug. If you aren't aware of it, it causes messages you sent to go to a different person in your text message message list. No it is not user error.
So I decided to try and data wipe. After this there is basically no launcher when it boots up. The notification pulldown is there and working, and it shows the phone has a signal and wifi is turning on and working, capacitive buttons light up when you press them, but you can't do anything except grab the pulldown.
It won't connect to USB when booted up, phone shows a message that you must close running processes first, or something like that. But I cannot flash a rom from recovery anyways, since it only brings up a stock recovery.
I can get it into download mode, if I hold my tongue just right and try several times, but not sure what to try to flash with Odin. I already downloaded an ICS Passion rom, but then reading the tutorial saw that I must first download CM7 and install that, then upgrade the bootloaders to the GB ones, then flash the ICS rom. I would really like to at least upgrade to 2.3 and something not based on Samsung fw, but the main priority is to get it working again.
Anyways, whatever you guys can suggest to try would be greatly appreciated. Thanks.
Honestly bro, everything I'm seeing in Google makes it seem like that phone is more on par with the Galaxy S Fascinate than with our Vibrant. Although on the exterior they all look so similar... I dunno, maybe check out their forums and see if you get anymore help there?
Here's the link:http://forum.xda-developers.com/forumdisplay.php?f=718
Goodluck!
The title of this thread looks similar to my problem with my Samsung Vibrant. So I would ask it here, too.
I'm not sure if I bricked my vibrant, it's still power up, only to to first screen, which has the words Vibrant (and) Samsung and stay there forever.
I first rooted my Vibrant successfully.
Then, I've followed the instructions below:
1. Download the latest version of the ROM from the original development page.
2. Transfer the downloaded zip file to the root of the internal SD card on your phone.
3. Turn off your phone and wait for complete shutdown (wait for capacitive button lights to go off).
4. Then, boot into Clockworkmod (CWM) recovery. To do so, press and hold these 3 buttons together: Volume Up, Volume Down, & the Power button till the screen turns on, then let go of the buttons. In recovery, use Volume keys to scroll up and down and power key to select an option.
5. Perform a full Wipe (this will not wipe your SD cards)
a. Wipe data / factory reset –> then Select Yes - Wipe data/Factory reset on the next screen.
b. Select “mounts and storage“, then select “format system” -> select “Yes” on next screen to confirm. Then, select “go back” to go back to the main recovery menu.
6. Now scroll to “Install zip from sdcard” and select it.
7. Select “Choose zip from sdcard”. Scroll to the file you transferred in Step 2 and select it.
8. Now confirm installation by selecting “Yes — Install **your_rom_file_name**.zip – The ROM will start installing.
9. The phone will reboot to recovery in the middle of the installation, then continue installing the ROM.
When I got to step 7, instead of running the zip file downloaded on step 1. I run the update.zip (something like that). And I couldn't get back to the CWM recovery screen anymore. Only I can boot it to the regular recovery screen, where it let you:
reboot the system
reinstall packages
delete all user data
delete cache data.
Or boot up to the screen described at the beginning of this post.
So what should/can do to fix this problem?
I think my phone is t959 (it's t-mobile Samsung Vibrant)
Thanks for the reply. As far as I thought the only similarity between this and the at t fascinate was the name fascinate. There's is the i5000 and mine is the t959d? Should this post be moved over there? I found a thread there with someone having partly. the same issue as mine not being able to install cwm but its been there for days and likely will not be replied to.
I've spent a lot of time trying to fix messed-up installs. Seems to me that if for any reason you can't rrflash the rom, or reflashing and wiping doesn't work, just Odin-ing back to JFD and going from there is the best bet.
Well I was about to go ahead and download stock JFD and try flashing that but it appears that Mega upload has been shutdown by the FBI for fraudulent activity, and Rapid share is not working either. Maybe they're too busy because of the mega Upload shutdown or they were owned by the same people and have also been shut down. So now I'm not sure where to even find files that are safe to flash.
I just spent another hour on here and Android forums, and basically all the the threads are one or two posts, with no resolution to the OP, and none of the downloads links anywhere are working. I'm pretty patient but I'm ready to give up. Does anyone want to trade a soft bricked T959D in mint condition for any old beatup HTC that works? I've had my fill of Samsung's now.
No trade sorry but if you want to donate shoot me a pm.
Before you dump it, give me some time to look into this and I'll see if I can get you up and running with some files. Sammys are way user friendly unless you aren't doing something right, then you could always go back to stock.
Hold the phone. Haha. I'll get back to you.
You too ciditin
Thanks Woodrube, I will definitely wait patiently as long as I know I'm going to be able to sort it out eventually. I'm busy with schoolwork so even though I enjoy this kind of thing I hate spending hours upon hours on it just trying to get the phone operational again.
I've been spoiled by my htc desire, it's been almost foolproof to do anything after spending a short time reading a few FAQ's and there have been no close calls. Soon I'll probably try an ICS rom once they get a bit more stable.
I will definitely do a donate if you can help me get it going with a decent rom. I would love to have lag fix on it since my girlfriend is a bit annoyed at the lag.
Since I got my first Android phone in August 2010, I've rooted and rom'd an LG Shine Plus, LG Optimus One, HTC Desire, the T959D and Galaxy S2 T989D (sold after I got it on an early renewal). I also had to fix my sisters I9000M after a failed 2.3 update operation. So I'm no expert on this, but I've got a little bit of experience messing around with stuff. Just they all require different processes, different programs to do the job, so you have to relearn it for every new phone.
The Samsung's have been the biggest pain compared to the others, but I think it's mostly because the Canadian versions are always slightly different than the Tmobile version, but besides that Samsung always has several different versions of the same.
If I get this thing up and running again I will probably check out your GPS fix thread, cause the GPS on this phone would lock on but it was way out to lunch. Like 6 streets away from us out to lunch.
I found the way to fix my problem, hopefully it'll fix yours.
I was able to restore my stock.
Here is what you have to do.
WARNING!!! THIS WILL WIPE ANY DATA ON YOUR DEVICE, IT WILL REPLACE YOUR BASEBAND, KERNEL, RECOVERY AND OS.
DOWNLOADS:
ODIN application
512 PIT file - I can't post link so pm me
T-Mobile Vibrant JFD Image – I can't post link so pm me
USB Drivers from the Samsung Galaxy S – 32 Bit Windows Download \ 64 Bit Windows Download (again I can't post link, yet)
INSTRUCTIONS:
1. Turn off your phone (remove battery, and usb cable to pc).
2. Plug usb cable to your phone (this is just for easy to connect to the PC in the next step), do NOT connect it to your pc just yet.
3. Get your phone into DOWNLOAD mode by holding the Volume Up, Volume down, and plug your usb cable to your PC. A yellow digging Android sign should be on the screen of your phone. This may take a few tries to get it right.
3. Launch ODIN.The third box dow from the top-left box should then say a COM port (the box under the top-left box should be yellow).
4. In ODIN, load each file with its corresponding field:
___a. Click PIT and select *.pit file extracting from the 512 PIT file above.
___b. Click PDA and select the *.tar, stock JFD file.
5. Don’t check anything else, the other two boxes should be checked by default (Auto Reboot and Reset Time)
6. Hit “start.” Be patient for a couple minutes! (The bar under the top left box should show the progress, and on you phone, too)
7. You should have your Vibrant back in with stock configuration.
Good luck!
NOTE: COM3 worked fine for me. COM should not matter as long as you are using the correct drivers.
350Rocket said:
I will definitely do a donate if you can help me get it going with a decent rom. I would love to have lag fix on it since my girlfriend is a bit annoyed at the lag.
Click to expand...
Click to collapse
Ok. I wasn't soliciting for a monetary donation, I was just going off that you wanted to trade. I can't trade but if you ever want to donate your phone then just PM me.
I have to agree with kawika that everything I have read has been that your model number is for the Fascinate. Easy tip off would be; does your phone have a sim card? It is probably a CDMA phone with no sim slot. I suggest getting the files you need from the Fascinate forums as I am almost positive that the T959 files will not work on the T959d. Since you have modded a I-9000m you know that they are slightly different than the I-9000. Same thing goes with this circumstance.
Good luck and sorry that there wasn't more I could do but it is just a different phone.
@Citidin - Good to see you got yours solved. If you have questions, please ask (in the correct thread for your question a this one will probably be closed out).
It definitely has a sim card and it's HSPA, I pulled the Sim card out and put it in my HTC Desire for her to use, and put my SIM card in this crappy little LG Optimus One that's too small for me to type on. So I guarantee it has a sim card and is nothing like the Verizon phones which will not work on any of the Canadian carriers AFAIK. I think nobody understands what the phone is, and that's why almost every thread with a problem like this ends in 0 replies. I think from now on I will stay away from Samsung's abortion phones that they sell in Canada. Or at least I will research community support before getting one.
Ours is called the Fascinate, but its completely different model # than theirs, it is the T959D. Just like how the new Telus galaxy S2x is the T989D, same phone as the T mobile T989_.
For some reason there seems to be a few posts in the Fascinate section, for Telus only, I think that only started because of confusion about what the phone was, but the phone has nothing in common with the Verizon CDMA version. Actually I think if you look up, just about every phone that Telus or Bell (same network basically) gets, is a phone that T mobile got first. HTC Amaze being another one. HTC Desire Z is the same as the Tmobile G2.
Sorry I misunderstood you about donating the phone itself. My last effort will be the JFD file that Citidin sent me a link to. Hopefully that gets it going. If not I will stash it away until I have extra time to try again.
Well once I got the JFD file downloaded and put phone in download mode, turned on Odin, realized the PC recognizes the device attached and being malfunctioned, so I cannot flash with Odin.
I tried Heimdall which I downloaded yesterday, but the program won't load as it says I'm missing a DLL file.
I tried Android flasher which I downloaded who knows when, and tried to just install a recovery image with it, but it gets stuck while pushing recovery image and the program locks up.
I decided to try my girlfriends Laptop instead of mine after maybe 40 failed attempts to get Odin to communicate on mine, and to my surprise it recognized it right away. I transferred my files, with the JFD to this computer and then flashed with Odin. It took about 2 minutes and it was up and running. I checked about phone and it said 2.3.3 firmware. Really confused I looked back at odin and realized I flashed the I9000M stock 2.3.3 firmware (KG3) that I flashed on my sisters phone back around xmas. I forgot I did that on this laptop.
Anyways it is working as it should except for the home button not working (which I had already read about in a thread about using I9000M or Vibrant roms on the T959D).
While it is unfortunately stock again, the 2.3.3 should fix the original problem of sending to texts to the wrong recipient, and it also seems a lot less laggy. I think I'll just let her try it as is and hope she is happy.
If you use the JFD file from the link I sent you, it should be the stock Tmobile Vibrant.
Similar problem
Sorry dont mean to hijack your thread but I think I am having a similar problem - posted in the wrong spot before so hopefully I am ok here...
Have a Vibrant and some how got crossed up on it.
I have been able to use Odin to update the phone, however after it says its done, it does a reboot as it supposed to, shows the samsung screen then just shuts down.
After about a hundred tries, someone pointed me to Eugene's no brick. I tried that and it will fix it so it will boot and go into recovery, but I can't seem to do much once I get there. My only options are to update, wide data and wipe cache. Can't get to the point where I can load an update onto the unit.
I tried wide data and reset, then reboot. It shows the samsung vibrant logo, then the splash screen, then the big S and then screen goes black and the cap buttons stay lit.
If I try to go back and load the stock pit and jfd file, it just goes back to not booting at all and shutting down after the logo
I cant seem to get it into recovery unless I do Eugene's fix
In one of my earlier attempts, I did check to repartition as direct in one of the other threads - been chasing this a while now!
Edit: It was originally a bell phone - does this matter?
If it was a Bell phone than it should be the I9000M. It sounds like your problem is a bit different than mine was. I was able to get into recovery mode and download mode just fine. I just didn't know which files to flash with.
I intended to flash the JFD that citidin sent me, but I accidentally use the KJ3 (latest I9000M 2.3.3 firmware). The I9000 and Vibrant roms are compatible with the T959D Telus Fascinate though, only problem being no home or search button.
It sounds like the Eugene thing (whatever that is, I'm not familiar) gets you into stock recovery. Like my original issue, you cannot flash or mount the sd card, or much of anything with the stock recovery.
Do you know that the file your flashing is compatible with your phone (the I9000M I assume)? More info that would probably help, is what firmware did you have on it before, was it JFD? What update did you try on it? Bootloader version - there are gingerbread bootloaders, and froyo bootloaders I think?
Have you tried different files other than the one that doesn't seem to boot up for you? I think most of the tutorials I've looked at, said not to check repartition. When i finally got this T959D working with the I9000 rom I did not check repartition and did not select a pit file, just the PDA, phone, CSC.
Yes it is a I9000M - I was trying to load the JFD tar file along with the 512 pit file. I followed a thread in the I9000 section and loaded a JPD tar file onto it, now it shows up as a I9000B - maybe I should stop
I can now get into recovery and or download (i think the steps are differant than hold both volume buttons - mine is holding the volume one way for recovery and the other way for download, along with home and power)
Wondering if I am in this bind because it isnt really what most are calling a Vibrant - maybe under Bell it is something else.
Bootloader? didn't know I had to do anything there
I just picked up the phone used from someone - I assumed it was stock and didn't do a good check to see what was on it.
I9000m is not the Vibrate but rather the Bell version of the Captivate. There is a dev section for the I9000m in the I9000 group.
I would definately stop what you are doing and read over there.
******
Also 350 you can re-map your keys to work but I am mobile now and cant search it for you. Reason being that the. Vibrant keys are laid out differently in, ahh can't think right niece where they are, but it is fixable. Just search key remap or remapping.
Thanks very much for the help - have to wonder why they cant call them the same names regardless of where they are sold - guess thats why they get the big bucks
Hello everyone,
As this is my first post, i'd like to apologise in advance if this issue i'm about to detail has been posted before, but after about a month's worth of trial and inevitable error, reading everything i could find and following every walkthrough i've come across to the t...i'm at wit's end here.
So, i've got a Galaxy SII GT i9100, standard euro version i suppose, my provider is Vodafone Romania (wretched buggers the lot of 'em).
My troubles had started ever since the update from 2.3 with which the phone had arrived, to 4.0.3. I made the update through my home wifi, and i'm guessing the software was provided by either Google, Samsung or Vodafone Ro.
In any case, 4.0.3 was a lot more sluggish and badly calibrated in terms of touch responses and video lag while streaming.
About a month ago i got another notification to update to 4.0.4. This update worked fine for about 20 minutes till the thing decided to freeze up completely, and not turn off from the power button held down a while.
After i had removed the battery and turned it back on, i simply got the following message: "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again."
Naturally Kies is a steaming pile and recovery fails every time with a message composed only of empty squares instead of text, i'm guessing it's because i lack a certain language pack, but the only option is "OK".
So i turned to Odin, when that failed, instead of wiping the counter before sending it into the warranty, i did not. so they voided my warranty because it seems Odin is "unauthorized".
Multiple tries and failures later, quite a few attempts by other people that know more about this than myself...some have said i've got corrupt flash memory while other say "NAND rw corruption".
I'm a rather experienced pc builder...but this seriously stumps me.
I've also tried the walkthrough here on XDA with the same results.
So any new input would be much appreciated...be it through skype or another medium.
can you enter the download mode, if yes then try flashing stock firmware which comes with .PIT file (using odin)......may be that will help
try this thread as well http://forum.xda-developers.com/showthread.php?t=1457458
RazorwireClouds said:
Hello everyone,
As this is my first post, i'd like to apologise in advance if this issue i'm about to detail has been posted before, but after about a month's worth of trial and inevitable error, reading everything i could find and following every walkthrough i've come across to the t...i'm at wit's end here.
So, i've got a Galaxy SII GT i9100, standard euro version i suppose, my provider is Vodafone Romania (wretched buggers the lot of 'em).
My troubles had started ever since the update from 2.3 with which the phone had arrived, to 4.0.3. I made the update through my home wifi, and i'm guessing the software was provided by either Google, Samsung or Vodafone Ro.
In any case, 4.0.3 was a lot more sluggish and badly calibrated in terms of touch responses and video lag while streaming.
About a month ago i got another notification to update to 4.0.4. This update worked fine for about 20 minutes till the thing decided to freeze up completely, and not turn off from the power button held down a while.
After i had removed the battery and turned it back on, i simply got the following message: "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again."
Naturally Kies is a steaming pile and recovery fails every time with a message composed only of empty squares instead of text, i'm guessing it's because i lack a certain language pack, but the only option is "OK".
So i turned to Odin, when that failed, instead of wiping the counter before sending it into the warranty, i did not. so they voided my warranty because it seems Odin is "unauthorized".
Multiple tries and failures later, quite a few attempts by other people that know more about this than myself...some have said i've got corrupt flash memory while other say "NAND rw corruption".
I've also tried the walkthrough here on XDA with the same results.
So any new input would be much appreciated...be it through skype or another medium.
Click to expand...
Click to collapse
sorry i forgot to mention that i can enter Download mode using Vol. down + home + power, BUT...i can't enter recovery mode or whatever it's called with Vol. up + home + power...that button combo only starts the phone with the same old error message.
also, i've tried this walkthrough
as far as i know if you can enter into download mode, your phone is not dead...........................i don't know much about android development but i am sure that your phone can be revived...........keep searching the forum and try contacting some of the sgs2 developers they might be able to help you
cheers
RazorwireClouds said:
sorry i forgot to mention that i can enter Download mode using Vol. down + home + power, BUT...i can't enter recovery mode or whatever it's called with Vol. up + home + power...that button combo only starts the phone with the same old error message.
also, i've tried this walkthrough
Click to expand...
Click to collapse
pretty much what i'm thinking as well, there should be a way to restore it without resorting to cannibalism and taking a broken phone's mobo.
but i have been searching and being new to these forums i've no clue who to contact, but anyways, thanks for the reply sir. my thanks
bumpdonkey.
Come on,are you trying different things like disabling kies/USB cables/ports/different PC.
Have you tired flashing the stock Rom through Odin? You can find it at sammobile.com.
Sent from my SGH-I727 using xda app-developers app
as i've stated in the first post, i've tried almost everything. this includes flashing a series of different roms, kernels, pits etc.
as well as trying it with kies uninstalled, and since it's been attempted by other people, i'm guessing it's superfluous to try it on another PC than my own because others have already done so with it. and the cable is just a cable.
i have the same problem and i still searching
when i try to mount the data partition it fail
i tried all things but still no solution
come on guys help us to revive our sgs2
so far, the most i've accomplished was bringing it from the error message to the boot screen where it remains forever...by flashing the bootroom.
but if i tick "nand erase all" it fails to do anything.
No bumping
Do not bump this thread. The answer will come because someone knows it, not because it's bumped every few hours.
which reatmne
sorry about that, i'll cut the bumping then...i'm just...beyond frustrated at this point...it's been a brick for about a month now...nobody seems to know how to fix the blasted thing
Maybe...
I had once got stuck.
If you could get to the recovery, i think you can try wipe data, wipe data, wipe data....................
Then flash stock rom, or those you think is reliable.
wipe and flash. wipe and flash.
If you can't, use ODIN....... the only way
flash and flash the stock rom or any others.............
if it works, there you are.
Hope it works!!
you may wanna read the whole topic before replying, just saying
Your phone's obviously stuffed and only one of two (but 95% likely only one) things is going to fix it (nothing anyone here can suggest will).
I think you know what they both are. Continuing to post to this thread is simply delaying getting your phone fixed or getting another phone.
RazorwireClouds said:
you may wanna read the whole topic before replying, just saying
Click to expand...
Click to collapse
Exactly pal.Surprised he didnt say "if only you could boot up the phone you wouldnt need to get it repaired"......lol
MistahBungle said:
Your phone's obviously stuffed and only one of two (but 95% likely only one) things is going to fix it (nothing anyone here can suggest will).
I think you know what they both are. Continuing to post to this thread is simply delaying getting your phone fixed or getting another phone.
Click to expand...
Click to collapse
if i may ask what are thee two things which are going to fix the phone cuz mein is in the same situation thanks
I'm stuck in a similar position I'm stuck at galaxy s2 boot screen can get to download mode but not recovery I havnt tryed Odin yet only because I don't know what I'm.doing with Odin could somebody direct me on where to get the right files n stuff for Odin please I would be really gratfull thanks
Sent from my HTC Sensation XL with Beats Audio X315e using xda app-developers app
Google Odin 3, use the 1.85 version. Get the stock Rom from sammobile.com for your device. Unzip Odin and then run it. In PDA browes to the stock Rom. Make sure only auto re boot and F. Reset are checked in odin. Then hit start. Check the stickies for more details. See vincom's in the development forum.
Sent from my SGH-I727 using xda app-developers app
Cheers mate am all sorted now bk rooted with the rom I wanted lol
Sent from my GT-I9100 using xda premium