This package includes:
Repartitioning: Repartition to stock atlas V2.2
Reloading: IBL/PBL, PARAM, SBL, SBL2, Kernel, Recovery, FactoryFS
formatting:Cache, DBdata
This package does not include:
Modem, Data, MoviNAND flash.
This package does not wipe:
SDCard (where your pictures are stored)
EFS(Where your serial number and carrier information is stored)
Instructions:
Get the latest version of java here: http://java.com/en/download/installed.jsp
Put your phone into "Download Mode"
Run the program once, and if it does not work, then check the "Flash Bootloaders" checkbox and flash again
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This flash is intended to unbrick and support UnBrickable Mod. http://forum.xda-developers.com/showthread.php?t=1288093
to totally format your personal data including sdcard:
NOTE: THIS WILL REQURE REACTIVATION OF YOUR DEVICE! CALL CUSTOMER SERVICE TO REACTIVATE IF YOU USE THIS CODE
go into dialer
type *#83786633
hit the home button
go into dialer
press the back button and hold it to clear out the dialer
type *#83786633
press enable and then OK
go into dialer
type *2767*3855#
your phone will reboot
Download:
Download ED05 Heimdall One-Click
http://files.teamkomin.com/Fascinate/SCH-I500.ED05-One-Click.jar
This package is intended for:
Linux 32
Linux 64
OS-X Leopard
OS-X Snow Leopard
OS-X Lion
Windows XP
Windows Vista
Windows 7
REPARTITIONING ISSUE WITH HEIMDALL 1.3.0
Heimdall currently has an issue with repartitioning. 99% of the time you will not need to repartition. Failure to follow these directions can possibly lead to bricking:
Do not flash bootloaders if you see this message:
Code:
Local and device PIT files don't match and repartition wasn't specified!
This message means your partition tables do not match the firmware.
You will need to use Linux to repartition with this firmware package. Install Ubuntu. In Linux, you can copy-pasta this into the terminal to correct the repartitioning problem and then flash bootloaders. http://forum.xda-developers.com/showpost.php?p=17485056&postcount=23. Linux is free and you can dual boot on Mac or Windows.
Related
When I got my i9100, I didn't have any guides or tutorials to learn about root access. It was a trial and error process that I went through to further understand the process of flashing ROM's and gaining root. I have a little Linux experience so the term root wasn't new to me, but it is to the many users that flock here. In this guide I'll show you how to root Gingerbread using CF-Root.
Before I decided to write this guide, I was using CyanogenMod 9 but wanted to help the users of XDA, with the amount of threads I've seen asking for help rooting.
GINGERBREAD ROOT:
I'm using the stock ROM's for my country, Trinidad, rooting with CF-Root. That's to show people having all sorts of trouble finding a CF-Root kernel that even though where I live there's a kernel to use. It's not difficult.
Files used:
GT-I9100_TTT_I9100UHKI2_I9100UHKI1_I9100UUBKI2.tar
CF-Root-SGS2_XW_INU_KL1-v5.0-CWM5.tar
Odin3 v1.85.exe
Go to: CF-Root 5.5
- On your phone, dial *#1234#
- You'll see PDA, PHONE, CSC, pay attention to PDA and the last characters. In my case it's KL1.
- Using CF-Root's thread, look for a kernel matching those three digits (CTRL+F the search function).
- Download the matching kernel, flash using Odin.
HOW TO FLASH KERNEL USING ODIN:
1. Put the device into Download Mode, the device will accept anything that can be flashed using Odin.
To do this, hold down the following key combination:
Volume Down + Home + Power
Samsung KIES, does not need to be installed for Odin to recognise your device. However, the Samsung USB Drivers needs to be installed.
Once you've put the device into Download Mode, where it's ready to accept whatever you can throw at it, Odin needs to see it. When you plug the device into the computer, it will show up in the Message box saying 'Added!'.
For example:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Click PDA, select the CF-Root kernel you've deemed appropriate. Make sure to unzip the file or else Odin wouldn't be able to see it. It'll see the tar file though. It will not see the zImage inside the tar file.
This image is showing you where to put the CF-Root kernel to be flashed.
Start the process, it'll take less than ten seconds.
You've successfully rooted your device and replaced the stock recovery with ClockworkMod Recovery.
thanks for the info but i think you should move it to the general forum
Here's full guide to unroot/upgrade/unbrick your Note 3 neo LTE by flashing stock firmware via Odin
You are doing everything at your own responsibility, but if you follow this guide step by step, you won't brick your device.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Before you proceed, make sure:
1. You have charged your phone to 100%
2. You have Note 3 Neo LTE(SM-N7505), not N750 or something different
3. You have installed Kies and drivers on your PC
4. You have backed up all your data, if you don't need it, just skip this step
5. You have disabled Kies and firewall
6. You have downloaded Odin and firmware
Downloads:
Odin v3.09: http://d-h.st/d4G
Stock Firmware: http://sammobile.com/firmwares - Go to Firmware database/Smartphone/Android/SM-N7505-Galaxy Note 3 Neo LTE/Select your country
How to Flash:
1. Turn off your phone and go to download mode by pressing Power + Volume down + Home. Once you're there, press Vol up. You will see Downloading with Android logo and phone info.
2. Unzip Odin package and stock firmware package on your PC
3. Connect your phone to PC - Use stock USB cable for best compatibility
4. Open odin - Select Run as administrator. You will see the COM port of your phone in ID:COM box, it will turn blue and Added in the message box.
5. Click to PDA and select downloaded firmware. Make sure you have checked Auto Reboot, F.Reset time and nothing else. Now press start.
6. The box will turn Blue with Reset! message. Your phone will reboot.
Note: I reccomend to make hard reset after flashing stock firmware.
Hello everyone...
I find the phone with the non-working tuch ..
From the recoveri mode I managed to make a complete backup of the phone on sd and generated these 3 files:
userdata_20160101_000035.backup
userdata_20160101_000035.backup1
userdata_20160101_000035.backup2
is there a possibility to extract the content ???
I would be interested in contacts.
I state the phone is a Majestic
Thank you.
recovering contacts is not easy. you need SQLite Forensic Explorer to view the database file. the database is separated in many different tables, each table has a column "raw_contact_id" which contain always the unique id-no of contacts (one table contains phone nos, another table contains names, etc... you must query tables by id).
once you have extracted the backup, the file "contacts.db" is located "/data/data/com.android.providers.contacts/databases/"
from the backup I made, how do I extract the contacts.db file ??
remove the checksum(s) and merge the files. you need linux
don't be scared, i will explain you step by step. first step: do you have linux? if yes, press CTRL + ALT + T this is the terminal where you can do it. if no, please download unetbootin and prepare a bootable usb stick. you can run ubuntu on your pc without installing. don't hesitate to ask if you need help regarding unetbootin
scacco728 said:
finally I was able to understand something of the terminal in place ..
I move to the folder where the files are, I open the terminal I enter the commands and I generate this error .. why do you think ???
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Click to expand...
Click to collapse
"dd" does not accept wildcards. press <TAB> instead of * for word completion. you must type the full file name. remove the stars in this example code.
edit: i will answer in this thread, because this are linux basics. so lets open a "beginner" thread here, and leave the other thread open for more advanced questions. finally, your goal is to extract contacts, what we should not discuss in main thread
I am not the author, the author is a Chinese user, just a simple translation, the original post will be placed in the back.
-----------------------------------------------------------------------------------------------------------------------------------------------------
Amazfit nexo (Magisk，root,wearable)
Why not use fastboot because the command is disabled.
You need: adb tool, QFIL (in QPST), MagiskManager.
1 .Install QPST on your computer
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
2.Open QFIL and adb, enter adb reboot edl in the command window to enter 9008 mode
3.Extract boot
3.1)Download firehose and configure it according to the figure below
3.2)After entering Partition Manager, right-click the partition and click Manage Partition
3.3)Read partition: read as below
==============================================================================================
Note: Please backup each partition according to the above method, otherwise you will not be able to boot after failure. You can't use other people's recovery package to recover.
And at the same time rename to the partition name (without changing the suffix)
==============================================================================================
4.Convert boot.bin to boot.img (use IMg2simg)
5.Import to watch
Put boot.img into the watch, and cancel the hook of keeping avb2.0 in the installation option of MagiskManager.
6.Flash into boot
There is a magisk_patched.img file in the Download folder of your watch, put it on the computer, the watch restarts into 9008 mode, also use Partition Manger, right-click the boot partition (not aboot partition, don't
make a mistake), also click on the first One item, but to flash it in, we click Load Image and select this magisk_patched.img for flashing, twrp is the same.
7.Flash into wearable
Install ROOT Explorer，Unzip the wearable.zip and put it in the watch, copy it into the corresponding path one by one (for example, system/framework corresponds to /system/framework)
8.Then you can try to install some modules or wearos applications
File:
https://drive.google.com/drive/folders/1BHlxNqKZ3QoRv3PSULn1AwGadowSA_nQ?usp=sharing
Link：
https://www.coolapk.com/feed/176069...d=1096145&shareFrom=com.coolapk.market_10.2.1
https://www.coolapk.com/feed/175621...d=1096145&shareFrom=com.coolapk.market_10.2.1
https://www.coolapk.com/feed/173257...d=1096145&shareFrom=com.coolapk.market_10.2.1
https://www.lanzous.com/b015anw7e 密码:5ty2
can you point us to the direction of this chinese guy?
xicko said:
can you point us to the direction of this chinese guy?
Click to expand...
Click to collapse
This is the CoolMarket homepage of Chinese authors. Http://www.coolapk.com/u/1415080
The author also asked a programmer to compile it TWRP,https://wwu.lanzouv.com/i1L9Y0a61q3c
Password: 69zz
[BETA] Windows All-In-One Tool Batch File
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
A good tool based on Windows batch commands. It has a few commands for now, (already 200 lines, but alright ...) but I will keep updating it and make a good release. It works for now, but not everything is correctly yet.
DownloadSource #1: GitHub
How to useOpening programAll tools/options1. DISM and SFC Repair - Use this option if you want to check your computer of corrupted Windows files, and recover them if needed.
2. Create Restore Point - Creates a restore point with the name 'Restore Point'. (I might update the name in the future to use something like the date, need to look into that...)
3. Windows IP Configuration - Checks the network settings and show information about the network adapters using the IPCONFIG command.
4. User List - Shows a list of all users that exist on the PC.
5. Check Windows Version - Opens WINVER.exe, from where you can check information about the version of Windows.
6. Ping Tool - Allows you to ping a website.
NOTE: don't add ping before the command! So 'ping -t google.com' becomes '-t google.com' here.
7. N/A yet.
8. Open Terminal - Allows you to open a Windows Command Prompt. (Still need to fix something there).
9. Credits - Shows all the credits for the program (Currently me and Microsoft. Microsoft for developing the possibility to make those easily-to-develop programs)
10. Tool Information - Shows information about the batch file/tool.
11. Exit - Closes the tool.