Which kernel for CM7 ? - Galaxy S II Q&A, Help & Troubleshooting

Hi there
I have tried to install CM7 yesterday and my SGS2 doesn t start. i have done the 3 wipes under CWM. So my question is which Kernel, firmaware... do i need to work properly with CM7 ?
I use XXKI3 and kernel blackheart 666 with cwm 4.2, darky rom.
Thx

I think you should use codeworks (not sure on spelling) CWM.. I think it has it's own kernel and you can root using SOC..
Sent from my GT-I9100 using xda premium

saerdryl2 said:
Hi there
I have tried to install CM7 yesterday and my SGS2 doesn t start. i have done the 3 wipes under CWM. So my question is which Kernel, firmaware... do i need to work properly with CM7 ?
I use XXKI3 and kernel blackheart 666 with cwm 4.2, darky rom.
Thx
Click to expand...
Click to collapse
Download and flash this kernel
Download the newest nightly from here and put it into your internal sd card
Boot into CWM recovery
Wipe cache/data/dalvik cache
Flash the CM7 zip
If you get stuck at a bootloop reboot into CWM recovery and flash the CM7 twice.

Thx but how i boot in recovery mode with CWM.

saerdryl2 said:
Thx but how i boot in recovery mode with CWM.
Click to expand...
Click to collapse
Why are you flashing stuff when you dont even know the very basics . Thats asking for a bricked phone .
Guide
http://forum.xda-developers.com/showthread.php?t=1125282
jje

JJEgan said:
Thats asking for a bricked phone .
Click to expand...
Click to collapse
+1 on that. It's so sad to see when people are just one step away from bricking phone. It takes only ~30 mins to read and understand the very basics.
Sent from my GT-I9100 using XDA App

i have done 36 flashs without brick my phone but i don t remenber how to enter inside recovery mode at the phone boot.

saerdryl2 said:
i have done 36 flashs without brick my phone but i don t remenber how to enter inside recovery mode at the phone boot.
Click to expand...
Click to collapse
if i was you id take JJE advice and do reading before you go ahead and flash. also to be able to get CM7 you need to be able to use ROMmanager Premium to download the nightlies as far as i use it.....
but anyway if you have CWM go into your apps click on CWM then scroll to reboot phone into clockwordmode recovery and press that and then your into recovery..
but seriously if i was you id watch videos on youtube on how to do it and read the guide that JJe has gave you

Related

Unable to install CyanogenMod 7 again!!!

Hello guys,
I would have not made this post without a reason! I have searched the froum and used google for over 2 days but dont have a solution for my problem that's why i opened the thread!
My SGS2 was on CyanogenMod 7 and i decided to try the leaked version of 4.0.3 (I9100XXKP8 to be exact) so i preformed a full backup via recovery!
After this i flashed 4.0.3 using ODIN and used it did a root on it and istalled CM9. I did this just to see the real difference between the 2 firmwares. Everything worked great i had no problems at all.
After i was finished playing around with the firmwares i decided to restore my CM7 backup! I had no problems booting into recovery and the restore worked fine! no errors or anything. After i selected to reboot my device i got a Kernel Panic and couldn't do anything!
So i flashed KI3 stock from sammobile and rooted it via CF and then again i tried to install CM7 which goes fine through the install no errors! when i select to reboot the phone i have the ''Samsung galaxy s2 screen'' in a reboot loop! I reflashed the phone again with KI3 and tried again i followed the instruction step by step including wiping data/factory reset and wiping cache the same thinghappens. I tried to restore the CM7 back which i made, the restore process goes through but i get a kernel panic! So i reflashed KI3 again i thought it could have been the bootloader... i got the old boot loader and flashed it but i keep getting the boot loop! The strange thing is i can flash CM9 and it works but CM7 will not install on my phone at all! I have tried flashing it 10 times in the last 2 days.
Can anyone help me fix this and get back to CM7 because i dont know what to do anymore my flash count went from 5 to 39 in the last 2 days!
Note: i have tried using recovery and RomManager neither of them work! Also tried Stable CM 7.1.0 and nightly builds!
Try this and then restore again:
http://forum.xda-developers.com/showthread.php?t=1363738
Sent from my GT-I9100 using xda premium
Gnarfsan said:
Try this and then restore again:
http://forum.xda-developers.com/showthread.php?t=1363738
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
Hi,
i have tried this now and i am still getting a reboot loop! So it dose not work at all :[
I'v had the same problem. It was solved by flashing the .pit file for cm7 with odin.
That is very strange. I assume that you did a factory reset after that procedure?
Sent from my GT-I9100 using xda premium
syue87 said:
I'v had the same problem. It was solved by flashing the .pit file for cm7 with odin.
Click to expand...
Click to collapse
Can you tell me where you got the cm7 .pit from? as i am using the one provided with the OFW of KI3... Thanks again!
Gnarfsan said:
That is very strange. I assume that you did a factory reset after that procedure?
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
Yes i reset everything there was i did this whole guide step by step about 20 times tried everything! i even had help from the guys working on CM9. They couldn't help and told me to open a thread here :[
Well, the pit file is probably the best bet then. Good luck when you get it.
By the way I meant a factory reset after the kernel clean and restore.
Kernel clean -> restore -> factory reset.
Gnarfsan said:
Well, the pit file is probably the best bet then. Good luck when you get it.
By the way I meant a factory reset after the kernel clean and restore.
Kernel clean -> restore -> factory reset.
Click to expand...
Click to collapse
I have tried this still no luck :[ Also tried previous back ups but the are not working either. I also tried to flash Villian rom 3 now and the only thing that happens it stays on ''Samsung Galaxy s2'' screen no reboot or anything for bout 10 min. tried to go into recovery but it isn't working :[ back to flashing KI3 again!
Which kernel were you using when you originally made that cm7 backup? Was it the stock cm7 kernel or perhaps siyah's? The kernel panics are probably due to using a cm9 kernel(recovery 5.5...) to restore a cm7 backup and then using cf-roots ki3 kernel(recovery 4.2...)to restore a cm7 backup. I'd try flashing siyah's kernel(recovery 5.0...) through odin and then try to restore that backup.
Hv u try flash the cm7 twice in cwm before u reboot?
Sent from my GT-I9100 using xda premium
darrez said:
Hv u try flash the cm7 twice in cwm before u reboot?
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
Good point, the first install is usually quick, the 2nd one takes much longer and does the whole shebang.
TheRize said:
Can you tell me where you got the cm7 .pit from? as i am using the one provided with the OFW of KI3... Thanks again!
Click to expand...
Click to collapse
The forum won't let me post links. Just google search "Odin_+Pit_+_Flashguide_-_I9100.rar".
peachpuff said:
Which kernel were you using when you originally made that cm7 backup? Was it the stock cm7 kernel or perhaps siyah's? The kernel panics are probably due to using a cm9 kernel(recovery 5.5...) to restore a cm7 backup and then using cf-roots ki3 kernel(recovery 4.2...)to restore a cm7 backup. I'd try flashing siyah's kernel(recovery 5.0...) through odin and then try to restore that backup.
Click to expand...
Click to collapse
I was using the stock Kernel from CM7 to create the backup! The problem is i cant install a clean version of cm7 at all i end up in a boot loop! But if it try to install CM9 i have no problem? I will try to flash recovery 5.0 and try again :]
darrez said:
Hv u try flash the cm7 twice in cwm before u reboot?
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
Yes i have tried this about 10 times so far! I have read this on the Cyanogenmod forum but it didnt help : [
Re flashed 5.0.2.7 recovery and tried to do a restore. now the phone is stuck in a reboot loop again! So this dose not work either :[
Now i have also tried to do a fresh install of CM7 with the 5.0.2.7 recovery but it didn't work! I would be great full if anyone could help me!
Boot into recovery
wipe data/factory reset
goto mounts and storage > format system
install cm7 from sd card, then install it again right after
reboot
If this doesn't work throw the phone against the wall because this should work, unless flashing those bootloaders messed something up, or you flashed the wrong one.
as a last resort....
flash stock firmware.
flash cfroot kernel
try to flash cm again.
always works for me.
peachpuff said:
Boot into recovery
wipe data/factory reset
goto mounts and storage > format system
install cm7 from sd card, then install it again right after
reboot
If this doesn't work throw the phone against the wall because this should work, unless flashing those bootloaders messed something up, or you flashed the wrong one.
Click to expand...
Click to collapse
I have tried this as well!!! I was told by one of the CM9 members to do this! Didnt help :[ The thing is i got the old bootloader and flashed it unless there is more versions of it ????

[Q]Installing custom rom on I9100.. Possibly bricked

Ok heres what i did.
First On 2.3.6 KL1 i presume. Rooted my phone using CF ROOT
http://forum.xda-developers.com/showthread.php?t=1103399
Then Installed F1 Galaxy Nexus ROM
http://forum.xda-developers.com/showthread.php?t=1601518
Then tried to dual boot (Greedy me!)
The other ROM i thought of was Resurrection ROM..
Then i installed it. Using this guide
http://forum.xda-developers.com/showpost.php?p=24233085&postcount=2
So the next time i installed Siyah 3.2b5 My phone didn't boot after The initial S2 logo.
So I then flashed a new ROM KL8 from Odin
Its working fine.
But am not able to install any other ROM.
Any idea what might be the issue?
Thanks in Advance
arunreturns said:
Ok heres what i did.
First On 2.3.6 KL1 i presume. Rooted my phone using CF ROOT
http://forum.xda-developers.com/showthread.php?t=1103399
Then Installed F1 Galaxy Nexus ROM
http://forum.xda-developers.com/showthread.php?t=1601518
Then tried to dual boot (Greedy me!)
The other ROM i thought of was Resurrection ROM..
Then i installed it. Using this guide
http://forum.xda-developers.com/showpost.php?p=24233085&postcount=2
So the next time i installed Siyah 3.2b5 My phone didn't boot after The initial S2 logo.
So I then flashed a new ROM KL8 from Odin
Its working fine.
But am not able to install any other ROM.
Any idea what might be the issue?
Thanks in Advance
Click to expand...
Click to collapse
the KL8 rom u installed from odin is it a stock firmware if yes then u have lost root privealage hence u have 2 root it once agian using a cf root kernel
then only u can install any other roms
Did Root once again (Sorry For not mentioning)
Sun90 said:
the KL8 rom u installed from odin is it a stock firmware if yes then u have lost root privealage hence u have 2 root it once agian using a cf root kernel
then only u can install any other roms
Click to expand...
Click to collapse
Yeah i did root using CF Root. Hence i got CWM from which i did wipe data, wipe cache and then Installed zip from sdcard. (F1 galaxy nexus from Faryaab) It got installed. Then again stuck at the boot logo. Dont see the boot animation
Try formatting system partition and get the file again, might be corrupt download
Sent from my GT-I9100 using Tapatalk 2
Tried it no go
atifsh said:
Try formatting system partition and get the file again, might be corrupt download
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
Hi..
I did what you told me to. Still get the same boot logo
Guess my phone is done for R.I.P
Don't think so phone is rip, download the file again, or try some other ROM
If I were you I do this
formatting system, cache, data and after that flash stock GB using Odin.
Sent from my GT-I9100 using Tapatalk 2
What intrigues me is that, If i use KL8 alone (which is flashed via odin) Am able to use the mobile. use it well actually
But if i try to use any other ROM its stuck in the Boot logo
I tried LPQ from Intratech. Even that didnt work.
I thought this could be an issue with the kernel
(But i realised i was able to flash CF Root's kernel and move back to stock kernel so there would be no issue with regards to Kernel.)
Incorrect or Incomplete download wont be an issue i guess as I tried two to three ROMS.
Btw. I used this link
http://www.technetinfo.in/mobile/mobile-software/i9100xxkp8-android-403.html
I followed all the Instructions (Guess may be cause of the PIT file. I'm not sure cause ive seen in posts that we should not lay hands on PIT files)
So someone please help me out.
Will be ever so grateful
atifsh said:
Don't think so phone is rip, download the file again, or try some other ROM
If I were you I do this
formatting system, cache, data and after that flash stock GB using Odin.
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
By formating system cache data you mean wipe options in CWM right. That i have done lotsa times. Can kernel failure cause these issues, as once i got Kernel panic mode error??
If you follow a link from another forum why not ask them its their instructions after all .
XDA says total wipe of the phone and start again.
and do not touch a PIT file ever .
....................................
Clean Slate for those that balls up the firmware .Or need to return to service or decide if its hardware/firmware problem .
Backup data first if phone is working .
Boot CWM recovery >>>> install CF root if no recovery first .
Mounts and Storage
Format cache data system sd card .
Remove battery
Boot to download mode
Open Odin
Install correct stock firmware .
Pick your custom rom and follow instructions .
jje
I think the problem was that you tried to dual boot with a 4.0.3 and a 4.0.4 ported ROM.As far as Im aware 4.0.3 is the supported ROM for dual boot with Siyah kernel.I personally wouldnt trust 4.0.4 dual boot yet.Do as posted above and you should be O.k.
Finally Issue solved
JJEgan said:
If you follow a link from another forum why not ask them its their instructions after all .
XDA says total wipe of the phone and start again.
and do not touch a PIT file ever .
....................................
Clean Slate for those that balls up the firmware .Or need to return to service or decide if its hardware/firmware problem .
Backup data first if phone is working .
Boot CWM recovery >>>> install CF root if no recovery first .
Mounts and Storage
Format cache data system sd card .
Remove battery
Boot to download mode
Open Odin
Install correct stock firmware .
Pick your custom rom and follow instructions .
jje
Click to expand...
Click to collapse
cooza said:
I think the problem was that you tried to dual boot with a 4.0.3 and a 4.0.4 ported ROM.As far as Im aware 4.0.3 is the supported ROM for dual boot with Siyah kernel.I personally wouldnt trust 4.0.4 dual boot yet.Do as posted above and you should be O.k.
Click to expand...
Click to collapse
Thank you for your help.
Issue has been solved. Now am able to Install F1 Galaxy Nexus ROM
I'm putting dual booting aside for now. Will stay on CM9 kernel itself
Thanks again for your help

[Q] E: Cant mount sdcard

Hi,
I flashed CM10 yesterday and then everything was fine,
but today when i just switch into CWM recovery mode and did reboot system and now i am stuck on Boot screen...
Nothings working..
I tried clearing dalvik cache and all that stuff but no luck...
i checked the log and founf that its showing following error :
"E: Cant mount sdcard"
have i messed up anything?
help please....
have you tried removing sd card and putting it back in? Also try another sdcard. Also re flash your Rom
Flash rom using odin...will get things back to normal.....
And format the sd card b4 inserting it back in
Hit THANKS.button if m any help
~RR
apollopayne said:
have you tried removing sd card and putting it back in? Also try another sdcard. Also re flash your Rom
Click to expand...
Click to collapse
I tried every possible thing i was knowing...
i tried removing battery and kept the phone for 10 mins - dint work
i tried wipe cache, dalvik - dint work..
CWM is giving error for both sdcard and internal sdcard...
debanikonline said:
Flash rom using odin...will get things back to normal.....
And format the sd card b4 inserting it back in
Hit THANKS.button if m any help
~RR
Click to expand...
Click to collapse
I think its the last option left..
just thought if anyone has any other solution than flashing rom thru odin...
and yes i am facing issues with my memory card too... 32 GB memory card..
dspPunk said:
I think its the last option left..
just thought if anyone has any other solution than flashing rom thru odin...
and yes i am facing issues with my memory card too... 32 GB memory card..
Click to expand...
Click to collapse
Did you use Rom Manager to boot to recovery? I don't know if it's the same on i9100 but the i777 has issues with Rom Manger, with the recovery part of the kernel. I know CM comes with, I haven't researched it but maybe something to look into...... It kinda sounds like you formatted the ROM. GL
snipe2nite said:
Did you use Rom Manager to boot to recovery? I don't know if it's the same on i9100 but the i777 has issues with Rom Manger, with the recovery part of the kernel. I know CM comes with, I haven't researched it but maybe something to look into...... It kinda sounds like you formatted the ROM. GL
Click to expand...
Click to collapse
Yes i used Rom manager to boot into recovery...
can u suggest any possible fix for this??
Flash siyah kernel via odin and that should give you a fresh copy of clock work recovery if its corrupt?
Rom manager is nothing but trouble.It done the same thing to my x10i and my sg2.
It took several hours to get them back to running cwm(so I could restore my nand backups).
I think I used doom lords easy rooting kit for one and Odin for the other.
I've done a lot of stuff on several phones and I can state that after using RM it left the phones as close to full brick as you can get........lol
Sent from my GT-I9100 using xda premium
theunderling said:
Rom manager is nothing but trouble.It done the same thing to my x10i and my sg2.
It took several hours to get them back to running cwm(so I could restore my nand backups).
I think I used doom lords easy rooting kit for one and Odin for the other.
I've done a lot of stuff on several phones and I can state that after using RM it left the phones as close to full brick as you can get........lol
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
Ohh... I think then i have to do the last option only... i will flash a fresh kernel only...
Good luck.Its all the errors that crop up that are the problem.Hopefully you wont get them,but I had at least another 2 that sprung up.....,..lol
Sent from my GT-I9100 using xda premium
dspPunk said:
Ohh... I think then i have to do the last option only... i will flash a fresh kernel only...
Click to expand...
Click to collapse
Yup, there's your problem. Rom Manager flashes incompatible kernel.
Simply boot into download mode and flash Siyah kernel and you will be back up and running.
Sorry mate it dint work... I flashed siyah kernel and now the phone doesnt proceed further from Siyah kernel logo...
can any one provide me way to flash a rom using odin...
i can use CWM... not even with the hard key combination...
only way left is i guess Odin..
Odin cannot flash .zip formats and all the rom downlodables are in .ZIP format...
is there a way out?
TheATHEiST said:
Yup, there's your problem. Rom Manager flashes incompatible kernel.
Simply boot into download mode and flash Siyah kernel and you will be back up and running.
Click to expand...
Click to collapse
Sorry mate it dint work... I flashed siyah kernel and now the phone doesnt proceed further from Siyah kernel logo...
can any one provide me way to flash a rom using odin...
i can use CWM... not even with the hard key combination...
only way left is i guess Odin..
Odin cannot flash .zip formats and all the rom downlodables are in .ZIP format...
is there a way out
dspPunk said:
Sorry mate it dint work... I flashed siyah kernel and now the phone doesnt proceed further from Siyah kernel logo...
can any one provide me way to flash a rom using odin...
i can use CWM... not even with the hard key combination...
only way left is i guess Odin..
Odin cannot flash .zip formats and all the rom downlodables are in .ZIP format...
is there a way out
Click to expand...
Click to collapse
Flash CF-ROOT kernel for your kernel version
Swyped from my Samsung Galaxy SII
"Odin cannot flash .zip formats and all the rom downlodables are in .ZIP format..."
Because you should unzip them, shouldn't you?
przemcio510 said:
"Odin cannot flash .zip formats and all the rom downlodables are in .ZIP format..."
Because you should unzip them, shouldn't you?
Click to expand...
Click to collapse
yes even after i unzip it i cant find any TAR file inside it...
it consist of following folder and one .IMG file :
META-INF
system
boot.img file
Now you tell me what can i do with this??!!
Jokesy said:
Flash CF-ROOT kernel for your kernel version
Swyped from my Samsung Galaxy SII
Click to expand...
Click to collapse
CF ROOT kernel for kernel version??
Hi try this thread. http://forum.xda-developers.com/showthread.php?p=21659039 I got stuck on boot animation to RM and this guide fixed it. There is a full recovery package and guide included but it will wipe your device as it uses the CSC partition of odin. Read it thoroughly and see if it helps in your situation. All the best.
Sent from my GT-I9100 using xda premium
dspPunk said:
CF ROOT kernel for kernel version??
Click to expand...
Click to collapse
Wrong info, sorry OP for the confusion
Swyped from my Samsung Galaxy SII

Help with getting clockworkmod in S2

Okay so I managed to root my phone using this method ; http://forum.xda-developers.com/sho...m.xda-developers.com/showthread.php?t=2116549
And root works. Now I want to get clockworkmod on my phone. I followed some steps on the internet and ended up getting my phone bricked. I managed to get it working again. Can someone please tell me what to do right? I used odin before and that was the cause of my bricking. So i'd rather not use that again.
I went to the clockworkmod/rommanger website and i found the s2 "Download Recovery" thing. If i flash this through the android recovery system will it work?
Help me out here.
Thanks in advance
What do you mean "I want to get cwm on my phone".
That file should root your phone and install cwm.
Are you getting confused because there no icon.
Dont use rommanager as that can have dire effects on a phone.
And next time put in ALL details about your phone;model,rom etc.
xringo said:
Okay so I managed to root my phone using this method ; http://forum.xda-developers.com/sho...m.xda-developers.com/showthread.php?t=2116549
And root works. Now I want to get clockworkmod on my phone. I followed some steps on the internet and ended up getting my phone bricked. I managed to get it working again. Can someone please tell me what to do right? I used odin before and that was the cause of my bricking. So i'd rather not use that again.
I went to the clockworkmod/rommanger website and i found the s2 "Download Recovery" thing. If i flash this through the android recovery system will it work?
Help me out here.
Thanks in advance
Click to expand...
Click to collapse
If you are having official stock 4.1.2 rom then go to settings/about phone and check your baseband and then Go to philz Thread you can search it on XDA . Choose the zip one flash it from recovery you will get CWM.
Hope it helps
Sent from my iPhone using Tapatalk
theunderling said:
What do you mean "I want to get cwm on my phone".
That file should root your phone and install cwm.
Are you getting confused because there no icon.
Dont use rommanager as that can have dire effects on a phone.
And next time put in ALL details about your phone;model,rom etc.
Click to expand...
Click to collapse
I mean , when I boot into recovery its the default android recovery. Not the cwm. Not sure how to explain it but even before i rooted my phone. I had to boot into recovery, and the default android recovery screen comes when you want to flash the zip. After that I re boot into recovery the android one comes, not the cwm. So yeah the icon or the blue-ish recovery screen doesnt appear
Jeetu said:
If you are having official stock 4.1.2 rom then go to settings/about phone and check your baseband and then Go to philz Thread you can search it on XDA . Choose the zip one flash it from recovery you will get CWM.
Hope it helps
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
Yes I have 4.1.2. I checked the thread out . My baseband is i9100xxms4 but the thread has only xxms1. Does that matter or?
xringo said:
I mean , when I boot into recovery its the default android recovery. Not the cwm. Not sure how to explain it but even before i rooted my phone. I had to boot into recovery, and the default android recovery screen comes when you want to flash the zip. After that I re boot into recovery the android one comes, not the cwm. So yeah the icon or the blue-ish recovery screen doesnt appear
Click to expand...
Click to collapse
Ok,I know what you mean now.That used to happen with rachmats rooting method;a temp cwm was flashed,and when rebooted,the phone went back to stock recovery.
Several people in the know recommend using pc odin(think you said you didnt want to use it) because it is risky flashing stuff by other methods.If you use odin to do stuff,then that means it is ready to help you out if flashing by cwm or mobile odin goes wrong.
theunderling said:
Ok,I know what you mean now.That used to happen with rachmats rooting method;a temp cwm was flashed,and when rebooted,the phone went back to stock recovery.
Several people in the know recommend using pc odin(think you said you didnt want to use it) because it is risky flashing stuff by other methods.If you use odin to do stuff,then that means it is ready to help you out if flashing by cwm or mobile odin goes wrong.
Click to expand...
Click to collapse
So what can I do? I dont mind flashing cwm with odin as long as I dont brick my phone again. I've already rooted, if i use odin to get cwm , will it cause problems? Is there no other way to get cwm without odin? Maybe flashing a zip?
Yes,Jeetu said earlier.
theunderling said:
Yes,Jeetu said earlier.
Click to expand...
Click to collapse
Probem is my baseband is xxms4 while the philz only has one xxms1. Will it still work?
bump

flashed wrong CWM

Hello
I've accidentally flashed a wrong cwm-recovery (meant for some other phone)
After the installation I've rebooted into recovery and it booted the one I already had (that's when I understood it's the wrong one)
Then I've tried to reboot back to my rom but it got stuck on the rom's loading screen
Tried to flash a new rom after using gs2RomWipe
Tried to restore from a nandroid backup
all of them gave the same result.. stuck on the loading screen
Now to my question...
If I flash a stock Rom via Odin.. will it be enough? will I be able to reroot and use my phone normally again?
Or is there an easier way maybe?
i did the same today..
all the time bootloop..
flashing same rom that i was using did not helped..
flashing some other rom helped but cant call cause phone dont see simcard..
flashing some other roms like cyanogenmod also stuck my on bootloop..
I am pretty sure you have to flash via odin.
Update...
I've flashed a stock rom via Odin but it went into a bootloop
when I've entered recovery it said E:failed to mount efs (invalid argument)
so far I've found no way to make the phone work
please help
PureMind0 said:
Update...
I've flashed a stock rom via Odin but it went into a bootloop
when I've entered recovery it said E:failed to mount efs (invalid argument)
so far I've found no way to make the phone work
please help
Click to expand...
Click to collapse
If you are using i9100.
Then flash philz kernel via odin.
Then boot into recovery.
MOUNT usb storage
Place any rom zip in the root of ex sd card
Flash it with full wipe
Sent from my GT-I9100 using Tapatalk 2
corruptionfreeindia said:
If you are using i9100.
Then flash philz kernel via odin.
Then boot into recovery.
MOUNT usb storage
Place any rom zip in the root of ex sd card
Flash it with full wipe
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
It doesn't work...
stock rom wont start, restored nandroid wont start, philz + new rom wont start
I have efs backup as tar.gz but didn't find a normal guide on how to use it without the phone working (i.e adb)
I'm not even sure if the problem is because of the efs missing or not but it seems to be the problem
PureMind0 said:
It doesn't work...
stock rom wont start, restored nandroid wont start, philz + new rom wont start
I have efs backup as tar.gz but didn't find a normal guide on how to use it without the phone working (i.e adb)
Click to expand...
Click to collapse
Ok.
Lets make it clear.
After flashing philz which rom did u flash?.
U should have not got any problem.
Sent from my GT-I9100 using Tapatalk 2
corruptionfreeindia said:
Ok.
Lets make it clear.
After flashing philz which rom did u flash?.
U should have not got any problem.
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
I've flashed ReVolt JB version
the result was the same as any other method I've tried so far..
stuck on loading screen / bootloop
PureMind0 said:
I've flashed ReVolt JB version
the result was the same as any other method I've tried so far..
stuck on loading screen / bootloop
Click to expand...
Click to collapse
Ok.
Do this.
Boot into recovery
Wipe cache
Wipe dalvik cache
Factory reset/wipe data
Format system
Format preload
Format data
Install philz kernel
Boot into recovery
Select wipe data/factory reset-clean to install a new rom
Install any custom stock rom like neat rom, vivekrom , biftor (choose any one)
Reboot
I assume you are using gti9100
Report back.
Sent from my GT-I9100 using Tapatalk 2
corruptionfreeindia said:
Ok.
Do this.
Boot into recovery
Wipe cache
Wipe dalvik cache
Factory reset/wipe data
Format system
Format preload
Format data
Install philz kernel
Boot into recovery
Select wipe data/factory reset-clean to install a new rom
Install any custom stock rom like neat rom, vivekrom , biftor (choose any one)
Reboot
I assume you are using gti9100
Report back.
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
I did everything you said. installed Bitfor rom
got the same result.. still stuck on loading screen
Thanks a lot for your help it's much appreciated
hope I'll be able to solve this somehow
PureMind0 said:
I did everything you said. installed Bitfor rom
got the same result.. still stuck on loading screen
Thanks a lot for your help it's much appreciated
hope I'll be able to solve this somehow
Click to expand...
Click to collapse
First boot takes 5/7 min.
Wait
Sent from my GT-I9100 using Tapatalk 2
corruptionfreeindia said:
First boot takes 5/7 min.
Wait
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
still nothing...
and it usually takes 1-2 mins max for me
also doesn't explain why stock from odin wont work
It seems to me that I need to somehow fix the efs folder but no idea how to do that
almost all the guides I've seen about that requires the rom to work and use root explorer
the others wasn't clear enough or just not related
according to the shell commands my efs folder is empty
copying the efs folder I have on my sdcard doesn't help because it's not there after reboot
I have a tar.gz as well but not sure how to use it
can I flash the .tar via odin? or some other solution with adb/shell?
or do you think it has nothing to do with my problem?
anyone have any idea how to help me???
I've tried many different ways but my device just wont make it past the loading screen of the rom (doesn't matter which one)
I really have no idea what can cause this problem
thought that flashing stock rom via Odin should fix it but it doesn't help
I've tried some methods I've seen to fix efs problems but so far nothing helped
I'm really desperate at the moment :\
download mode and flash the cwm kernel via Odin should work.
Sent from my GT-I9100G using xda app-developers app
i am facing exact same problem
and it also start with flashing cwm for kitkat
nothing working now stock or custmised rom
hope some one can help us to fix it
Any more ideas??
If I take it to my carrier company, will they be able to make it work with their official rom?
PureMind0 said:
Any more ideas??
If I take it to my carrier company, will they be able to make it work with their official rom?
Click to expand...
Click to collapse
i take it to the repair shop they told me they can repair it with some kind of box which will reflash the rom.
i will get it back tomorrow
hope it work
casperusm said:
i take it to the repair shop they told me they can repair it with some kind of box which will reflash the rom.
i will get it back tomorrow
hope it work
Click to expand...
Click to collapse
Good luck!
I should send mine tomorrow and hopefully they can fix it
update when you get yours back
casperusm said:
i take it to the repair shop they told me they can repair it with some kind of box which will reflash the rom.
i will get it back tomorrow
hope it work
Click to expand...
Click to collapse
Did you get your device fixed?
OK.....just a quick thing......Odin flashing a normal single file stock firmware *may* not be the solution as it just overwrites what is already there during the flash. I will provide a link to a three part firmware that wipes the old as it flashes.....this essentially flashes the firmware onto 'pristine' memory partitions....it *might* help......
Here's the link.....
http://www.mediafire.com/?1z5ao5b6r594x45
Search for @Hopper8s Odin troubleshooting guide for instructions on how to flash it.....
Good luck.....
This might be my S2, or it might be my W...but it's definitely CM

Categories

Resources