THIS IS NOT MY ROM! I AM NOT RESPONSIBLE FOR IT NOR FOR WHAT IT DOES TO YOU OR YOUR PHONE! I’M JUST POSTING A CLEAR WAY OF INSTALLING IT BASED ON MY EXPERIENCE!
This based on Chinese MIUI @ http://www.miui.com/thread-249796-1-9.html
ROM is very smooth and stable, I've been waiting for an MIUI that could be my day2day ROM.
Features:
• No Data Disconnection Problems
• Torch is working
• Camera with flash
• So far everything basically!
Except (Not working):
• Wifi Tethering
If you have data disconnection problems, check this guide: http://forum.xda-developers.com/showthread.php?t=1286309
Language Pack:
Thanks to [email protected] (http://android.modaco.com/topic/346007-miui-language-pack-collection-rom-patch/)
http://www.mediafire.com/?l9sn911dom9fgs9
WARNING: Will reset the language of UI to Chinese, I will fix this and re-upload tonight, but for now you can select menu on the launcher then settings, go to the second tab, then on the lower group of settings you'll find a keyboard icon, click it then select the second option which is the "Select Language" menu, you can then change to English again.
I have modified the build.prop file so that the default language is English:
[PLEASE DO NOT MIRROR THESE FILES]
ROM + Boot Unlock Files: https://rapidshare.com/files/1882170718/miui_X10i_1.9.30_luke1215_2.3.English.zip
http://www.mediafire.com/?2got7wau1dv2ci3
Hot Fix 2 File: https://rapidshare.com/files/3177852288/1930-hotfix2.zip
http://www.mediafire.com/?9oz1defkjuvodud
Hot Fix 3 File: https://rapidshare.com/files/1523740939/1930-hotfix3.zip
http://www.mediafire.com/?96ahm47lr7hcd6z
Instructions:
• Download FlashTool_0.2.9.1-GBready_root_xRec from here http://forum.xda-developers.com/showthread.php?t=1196421
• Download Generic version 2.1update1 build 2.1.A.0.435 from here http://forum.xda-developers.com/showthread.php?t=920746
• Extract Both files.
• Place the ftf file from Generic version 2.1update1 build 2.1.A.0.435 in the firmwares folder of the flashtool.
• Make sure USB Debugging is enabled in your ROM.
• Run Flashtool and connect your phone.
• Select Flash and select the Generic version 2.1update1 build 2.1.A.0.435 firmware. (this will erase all your data from your phone, you better have taken a backup that you could restore later on)
• Follow the on-screen steps until you boot into Generic 2.1 from SE.
• Close FlashTool.
• Extract the ROM + Boot Unlock Files archive.
• Place the miui_X10i_1.9.30_luke1215_2.3.zip on your phone’s SD card
• Place the hotfix files on your phone’s SD card.
• Place the X10i_1.9.30_Luke1215-Miui-2.3.5.ftf file in FlashTool’s firmwares folder.
• Extract the qsd8250.7z from the ROM + Boot Unlock Files archive.
• Follow the instructions here: http://forum.xda-developers.com/showthread.php?t=1253277 until it says bingo
• Run flashtool again and flash luke’s kernel via FlashTool. (it should be available now)
• Boot into CWM recovery by pressing back button as soon as you see the Sony Ericsson logo on your phone’s screen.
• Select wipe data/factory reset.
• Select advanced then wipe dalvik cache.
• Select install zip from sdcard then select miui_X10i_1.9.30_luke1215_2.3.zip
• Select hotfix 2 then hotfix 3.
• Reboot!
Do you have to do aaaall of those steps if you already have an unlocked bootloader with doomkernel?
EDIT: Figured it out myself lol. If you have an unlocked bootloader already you only have to go through these steps:
• Run flashtool again and flash luke’s kernel via FlashTool. (it should be available now)
• Boot into CWM recovery by pressing back button as soon as you see the Sony Ericsson logo on your phone’s screen.
• Select wipe data/factory reset.
• Select advanced then wipe dalvik cache.
• Select install zip from sdcard then select miui_X10i_1.9.30_luke1215_2.3.zip
• Select hotfix 2 then hotfix 3.
• Reboot!
Click to expand...
Click to collapse
Does WiFi teathering works with this Rom???
Sent from my X10i using xda premium
How to fix permissions with cwm? I've got problems with market fc's.
ok, first bug report after about an hour of slight use:
- market force closes often. But I was able to install superuser and titanium backup Solution: Probably will be solved if permissions are fixed via recovery or maybe installing version 3.1.6 will work (3.1.3 is installed)
- pre-installed superuser doesn't work correctly all the time. Solution: Download superuser from the market. Works perfectly after that.
Otherwise no problems by now. I think this ROM can become quite awesome since the only bugs I found by now should be very easy to fix.
God dam*it the market FC's ALL THE TIME! :S
a1exander said:
God dam*it the market FC's ALL THE TIME! :S
Click to expand...
Click to collapse
no fc for me.
download rom manager v4.5.0.1 in menu you can fix permissions
Market is working fine for me.
This one also data bug. Please remove this.
Why it says no data bug?
Test it by switching to only 2g and back to 3 g. No godd...data connextion.
noob question..
where can i get X10i_1.9.30_Luke1215-Miui-2.3.5.ftf?
Dowload the .zip fileon first page and extract it, inside you will find all needed files including .tft
chauhanjayc said:
Does WiFi teathering works with this Rom???
Sent from my X10i using xda premium
Click to expand...
Click to collapse
No, Doesn't work!
robertberma said:
This one also data bug. Please remove this.
Why it says no data bug?
Test it by switching to only 2g and back to 3 g. No godd...data connextion.
Click to expand...
Click to collapse
Not for me, I don't have data disconnection problems, perhaps you should check this out: http://forum.xda-developers.com/showthread.php?t=1286309
You can edit build.prop according to this guide, let me know if it fixes your problems, if it does i'll create an update zip for easy flashing.
Is it possible to make a version flashable by xRecovery? Thanks
Phhh! Why xrec? Now we have cwm. FXP uses Cwm and all others could do it now also, since we have doomkernel which is compatible with mostly all the roms, and there you have xrec, cwm 4 and 5 included. So, why do you want to have xrec version?
sika68 said:
Is it possible to make a version flashable by xRecovery? Thanks
Click to expand...
Click to collapse
I made this one for xrecovery
U can try it if u want.
http://www.mediafire.com/?mqq92ly888lhn8z
gm007 said:
I made this one for xrecovery
U can try it if u want.
http://www.mediafire.com/?mqq92ly888lhn8z
Click to expand...
Click to collapse
Perfect. Thanks
For anyone with Market FC , Read this.
I had lots of Market FC, I was still able to install apps from the Market website so I tired to install superuser to see if it fixed it. It worked for the guy above but not for me. So I downloaded the market from http://www.redmondpie.com/android-market-3.1.3-apk-download/ and just copied it over to sd card, installed just from the file explore and boom it works. hope i could help anyone else out!
now all we need is a Wifi tethering fix
zoz33 said:
Not for me, I don't have data disconnection problems, perhaps you should check this out: http://forum.xda-developers.com/showthread.php?t=1286309
You can edit build.prop according to this guide, let me know if it fixes your problems, if it does i'll create an update zip for easy flashing.
Click to expand...
Click to collapse
Did you test it by switching to only 2g and then back to only 3g. I bad you do not have data connection.
Please test before you say you do not have problems because if your data does not drop out you right there is no problem. Only trouble begins if your lost signal and it will not reconnect.
Please report after test.
Build.prop i try, no luck.
---------- Post added at 10:59 AM ---------- Previous post was at 10:57 AM ----------
bimmerrob said:
For anyone with Market FC , Read this.
I had lots of Market FC, I was still able to install apps from the Market website so I tired to install superuser to see if it fixed it. It worked for the guy above but not for me. So I downloaded the market from http://www.redmondpie.com/android-market-3.1.3-apk-download/ and just copied it over to sd card, installed just from the file explore and boom it works. hope i could help anyone else out!
now all we need is a Wifi tethering fix
Click to expand...
Click to collapse
And data bug fix. proper fix
robertberma said:
Did you test it by switching to only 2g and then back to only 3g. I bad you do not have data connection.
Please test before you say you do not have problems because if your data does not drop out you right there is no problem. Only trouble begins if your lost signal and it will not reconnect.
Please report after test.
Build.prop i try, no luck.
---------- Post added at 10:59 AM ---------- Previous post was at 10:57 AM ----------
And data bug fix. proper fix
Click to expand...
Click to collapse
I think data will only be fixed when we get the official CM update.so we can have wifi and data working together
Sent from my SO-01C using Tapatalk
pretty good rom, I haven't tried the data yet but everything else seems to be good.
one small issue is the standby/bright screen issue
Related
Hi guys,i posted my first rom for Xperia play(R800I)
Today I poste my first Rom for the SONY ERICSSON - XPERIA PLAY
PS: I remind you that neither I nor the site XDA be liable for any damages that may result in using the files posted by me, being totally at your own risk, remember that you must necessarily have some experience, otherwise forget it the rom in question and try another.
Great Tanks to DooMLoRD and AndroHero ;-)
Now will list 'the peculiarities' of my work:
GB_Mixer-Play_by_Oty2002
Based on Official Firmware 4.0.A.2.368 R800i (last exit)
Unlocked Bootloader needs:
http://unlockbootloader.sonyericsson.com/instructions
(Only compatible with the Kernel and v03 OF DoomLord ;-)
The kernel can be found here:
http://forum.xda-developers.com/showthread.php?t=1176502
X Flashing the Kernel Procedure
• Download the boot.img
• save the folder where you boot.img ADB and the file fastboot.exe
• Turn off the PLAY
• Start the PLAY in fastboot mode (hold down the key fig (magnifier) and connect to the PC, the LED will be blue)
ADB • Use the commands below to flash the boot.img.
Code:
fastboot flash boot boot.img
• Reboot the phone and enjoy the new kernel
• Support up to overclocking 1.9GH, Recommended maximum GH 1.4)
Use (NoFrills CPU) for overclocking, and it can be found on the market 'for free ;-)
Removed some System From App, Rom and now 'very light ;-)
News 9 september 2011
GB_Mixer v.2
Do a full 3 wipe(DATA/APP – CACHE – DALVIK CACHE)
Improved installation script ;-) on CLOCKWORK RECOVERY!!!
Changelog!!V3
Click to expand...
Click to collapse
INCLUDED :
Root permissions already 'enabled (Thanks to Doomlord and its Kernel v3)
Clockwork Recovery (use Xperia Reboot to go) or you start pressing the button repeatedly xperia physical (back arrow) ;-)
Beautiful Bootanimation
Theme completely revamped style Mixer (For those who know him)
Apn taken since the last Full Build Cyanogen
DalvickCache2SD Enabled and running (320 MB free on reboot) (Thanks again to Doomlord) (358 mb free)
Zipalign
V6_SuperCharger
Sqlitevacuum
other tweak ;-)
Bravia Engine for Xperia play [Rel: v01] (Thanks DoomLord)
APP IN SYSTEM
Live Wallpapers (Nexus S)
semcsettings (BUGFIX)
New Market
Volume+
Adao file manager
Go launcer EX (last)(UPGRADABLE)
HTC ime(mod by me)KEYBOARD
SemcSettings(BUGFIX)
[FONT="]Alarm clock (system default)[/FONT]
This is in data/app,you can safely update from market
Advanced task killer
Cinetrailer
Memorybooster light
screenshot
Spareparts
Speed Test
Tunein Radio
Tweetcaster
Zedge
3 Nuovi Livewallpaper
Nofrills cpu
[FONT="]Quick Pic(Gallery alternative)[/FONT]
[FONT="]Screenshot[/FONT]
[FONT="]Google+[/FONT]
[FONT="]Go Weather[/FONT]
[FONT="]XPERIA REBOOT + RECOVERY (FREE)[/FONT]
[FONT="]apn on/off[/FONT]
[FONT="]zipsigner2[/FONT]
[FONT="]Camera mod2[/FONT]
[FONT="]Cache cleaner NG[/FONT]
[FONT="]Tunee music[/FONT]
[FONT="]Go weather miui stile[/FONT]
[FONT="]Go weather simple style[/FONT]
[FONT="]Google talk v1.3[/FONT]
[FONT="]Golauncher notification[/FONT]
NOTE: FOR FULL STABILITY 'AND' SHOULD NOT HAVE TO RESTART AFTER INSTALLATION SLOWDOWN;-)
Titanium Backup Council (FREE MARKET IN) to move applications to the SD;-)
I accidentally left a link to the V2 yet, now I have corrected the link, sorry
The Rom V3 is HERE:
http://www.multiupload.com/SIDZU65XLF
Flashing GB_Mixer-PlayV3_by_Oty2002.zip with Clockwork Recovery ;.)
Screenshot ;-)
Uploaded with ImageShack.us
As usual I hope you enjoy it;-)
Awesome work
AndroHero said:
Awesome work
Click to expand...
Click to collapse
Thanks Androhero, i'm very happy for your compliments
My works took a cue from your Rom.
nice rom.
this is the third rom today!!!
nice
nickholtus said:
nice rom.
this is the third rom today!!!
nice
Click to expand...
Click to collapse
yeah, kinda weird, i wonder if they planned this?
either way, nice work
Hi, thanks for the rom! Silly question - how do I flash the .zip file? Do I have to rename it to update.zip and then install from sd card in the recovery mode?
No, you don't need to. You can use the recovery to install the file from any location.
I'd just like to let you know, DSP Manager works out-of-box on stock SE without replacing audio libs.
Logseman said:
No, you don't need to. You can use the recovery to install the file from any location.
Click to expand...
Click to collapse
Thanks. I've managed to flash the new ROM. Get past the boot screen thinking all good until I get this message: "Sorry! The Application HTC_IME mod (process jonasl.img) has stopped unexpectedly. Please try again." Force Close.
I've installed the compatible kernel so not sure what's gone wrong here.
All I can do is power down the device, no access to menus etc
Any advice please?
Seems like the keyboard is giving you flak. OP, did you test it?
kingran said:
Thanks. I've managed to flash the new ROM. Get past the boot screen thinking all good until I get this message: "Sorry! The Application HTC_IME mod (process jonasl.img) has stopped unexpectedly. Please try again." Force Close.
I've installed the compatible kernel so not sure what's gone wrong here.
All I can do is power down the device, no access to menus etc
Any advice please?
Click to expand...
Click to collapse
Don't worry,it's normal at first boot
Logseman said:
Seems like the keyboard is giving you flak. OP, did you test it?
Click to expand...
Click to collapse
It's not a question of compatibility, it also gave that error on other phones where I also made the rom (lg optimus dual) I repeat that mistake it to be 'only immediately after the first flash ROM, tested and running perfectly
OTOGY2002 said:
It's not a question of compatibility, it also gave that error on other phones where I also made the rom (lg optimus dual) I repeat that mistake it to be 'only immediately after the first flash ROM, tested and running perfectly
Click to expand...
Click to collapse
You will get a FC on first boot with the HTC_IME mod. It's only because there is no data folder associated with it. It will FC and create it's own data
AndroHero said:
You will get a FC on first boot with the HTC_IME mod. It's only because there is no data folder associated with it. It will FC and create it's own data
Click to expand...
Click to collapse
exactly AndroHero,she goes all right really
Hi, thanks for all the replies regarding this issue but reboot hasn't helped.
I've rebooted it about 5 times so it's not a first boot issue. I'll try leaving it running for a while, as you mentioned it might create the file structure etc.. will let you know how I get on.
kingran said:
Hi, thanks for all the replies regarding this issue but reboot hasn't helped.
I've rebooted it about 5 times so it's not a first boot issue. I'll try leaving it running for a while, as you mentioned it might create the file structure etc.. will let you know how I get on.
Click to expand...
Click to collapse
OK, then do a test:
Try to write a message, must operate the keyboard htc after this test, restart the phone and you should not have more problems
OTOGY2002 said:
OK, then do a test:
Try to write a message, must operate the keyboard htc after this test, restart the phone and you should not have more problems
Click to expand...
Click to collapse
Tried that mate, no joy I can't get no apps up, can get into the keyboard settings by holding one of the hard keys then selecting the settings icon.
Should I reflash the kernel perhaps and then reflash the ROM?
kingran said:
Tried that mate, no joy I can't get no apps up, can get into the keyboard settings by holding one of the hard keys then selecting the settings icon.
Should I reflash the kernel perhaps and then reflash the ROM?
Click to expand...
Click to collapse
What I want to tell my friend, try to flash the kernel first and then flash the rom;-) I recommend you wipe the three usual
No luck I'm afraid, will keep exploring!
Quick question, will this rom work on a R800a?
Thanks, I have a little experience with flashing android phones and the iPhone. I don't have that much concrete knowledge of the "in's & out's" of the phone but I'm very good at following directions to the "T"...
Thank you very much. Looking forward to your rom
Hey all
I'm using this rom *AOKPCB R2 03/09/12*~ and every time i install this rom everything works except i have no service so i can't use it for calling .
what can i do to fix that?
Hey all
I'm using this rom *AOKPCB R2 03/09/12*~ and every time i install this rom everything works except i have no service so i can't use it for calling .
what can i do to fix that?
Click to expand...
Click to collapse
Reflash kernal and rom
Sent from my Xperia X10 using xda premium
Hey check that you've followed the instruction right
mcsqwizzys98 said:
Bugs
Use ferakernal 1.8 for working Wi-fi you can try other kernals but i didnt find any that worked!
DOWNLOADS!!!!
Aokpcb R2
http://www.mediafire.com/?ogeq7j6497ip5r6
Aokpcb R2 update1
http://www.mediafire.com/?94l16e8d2ge9m39
Cm9 Mcsqwizzys lite!~84MB
http://www.mediafire.com/?7z1mz3srjs1y7y1
Airplane orks without wlod on cm9.1 mcsqwizzys!!!!
Aokpcb R2 LITE!~104 MB!
http://www.mediafire.com/?d9drewlldrau963
Aokpcb R2 LITE Update1~84mb
http://www.mediafire.com/?1l5ddhdd0zwytwt
Aokpcb R2 Lite Update2~69mb
http://www.mediafire.com/?9hnh3bwe5bkcsuc
ADDON PACK FOR LITE! (not suggested as it defeats its purpose)
http://www.mediafire.com/?a78zln6166yf70g
ADDON PACK 2 FOR LITE!
http://www.mediafire.com/?7z1mz3srjs1y7y1
Gapps Ics (Non inverted)
http://www.mediafire.com/download.php?m94f29rc9sd04r4
Inverted gapps
http://www.mediafire.com/?b5jc8unk5c12k5f
Ferakernel ics! thanks fera!!!Flash with flashtool!
http://www.mediafire.com/?bt92v0qpxt9varq
Inverted gapps (look much better in my opinion) thanks bradman117!
http://www.mediafire.com/?6ruphl4uk3mkwtz
Link2sd support!
http://www.mediafire.com/?5vbt6hn8hus7wdb
LInk2sd are meant to place system apps in another sd partition so more apps can be installed
Instrucitions:
flash ferakernel 1.8 via flashtool
Boot into cwm recovery go into mounts and storage format/system then mount /system
install custom zip from your sdcard!
For lite version flash gapps ics!(Not inverted, flash inverted after 1st boot)
when its done wip cache partiotion and dalvik!
ps: i never format /data and it works great for me!!
Click to expand...
Click to collapse
Caimarcladev said:
Hey all
I'm using this rom *AOKPCB R2 03/09/12*~ and every time i install this rom everything works except i have no service so i can't use it for calling .
what can i do to fix that?
Click to expand...
Click to collapse
I'm having the same issue.
You can ask the dev if he's able and willing to fix it.
I haven't asked, cause i know a trick (yeah me!)
No credits for me! I can't remember who figured it out. But if you search in x10 threads, you'll find lot's of posts about this.
In dialer dial *#*#4636#*#*
A menu wil open; Choose Phone information (first option).
Scroll al the way down.
Choose Disable radio and wait for radio being shut down (sort of plane mode - your icon in status bar will change.).
Then, switch DNS check so that it says: 0.0.0.0 allowed
Then enable radio again.
If all went well then your signal will come back, including data connection :fingers-crossed:
I might be necessary to do it each time after a (cold) reboot.
If (after reboot) it already shows 0.0.0.0 allowed then you still need to disable radio,wait a moment, and enable radio to bring data connection back to life. Dunno why, but it works for me.
There are also apps that do this for you (like HiAPN), but in fact, they are just opening the menu for you.
Good luck!
NOTE:
This will be my last GB rom since sources for Galaxy S Advance has been released, I'll by making a JellyBean port of the SGSA to the Ace 2. Unless Sammy releases JB to our phone. I'm also going to buy Galaxy S Advance or the Galaxy S III mini(not available yet here in HK execpt the parallel ones and in expansys.com.hk) to replace my Ace 2.
Introduction:
First of all, I made this ROM specifically for the Galaxy Ace 2 GT-I8160 with a baseband of ZSLG1/ZSLK2 which is from Hong Kong.
The reason I made this ROM started with a severe scrolling problem with all Galaxy Ace 2 here in Hong Kong installed with the I8160ZSLG1 firmware, scrolling continuously is not possible because as soon as you scroll while the menu list is still moving or scrolling, touchscreen becomes unresponsive, unless you re touch the screen. this ROM has no BusyBox installed, its just a stock ROM with same UI, same funtionality
UPDATE V3:
Sorry for the late responses. I've been busy working here in my company. Anyway, this will be my last GB rom since sources for Galaxy S Advance has been released, I'll by making a JellyBean port of the SGSA to the Ace 2.
Original Stock ROM I8160ZSLK2(Hong Kong)
GT-I8160V3
Link to Stock XXLK7 Kernel with CWM and init.d support
List of Changes:
NEW
-based on I8160XXLK7
-permanent removal of CPU rendering, uses GPU rendering by default.
-init.d support
--place your favorite init.d tweaks inside /system/etc/init.d
-busybox 1.19.4/ZipAlign/Sqlite3(compatible with the newest Supercharger V6)
-deleted some unneeded files from lib folder.
Recent Changes
-all language files are for UK, so there's no chinese, but if you know english, that would be fine
-multi tap alphanumeric keypad bug fixed
-scrolling bug fixed
-STOCK UI(Same functions, same look and feel)
-Zipaligned APK's before packing
-Deodexed
-Rooted
-disabled ScrollingCache for smooth scrolling(modified framework.jar, not a build.prop tweak)
-disabled all camera sounds including autofocus
-Samsung bloatwares REMOVED
NOTE:
It is recommended to flash the kernel from the link provided above.
Installing instructions:
-make a backup of your phone
-flash the stock ZSLK2 firmware
-flash the kernel from the link provided above
-format /data, /cache and /system(THIS WILL DELETE ALL YOUR SETTINGS AND DATA)
-wipe dalvik cache
-wipe battery stats
-unmount all volumes
-flash the ZIP file and wait it to finish
-reboot(startup takes long time since dalvik is being rebuild)
-when booting is done, setup your phone, language, time, etc.
-before installing apps, reboot phone
-then you can start installing your apps
NOTE:
-Kies over Wifi is removed, clicking on it from the menu will force close the settings application.
-Don't attempt to flash this ROM to a different baseband, your phone will still work but you will not have a GSM/3G/Network signal.
WARNING APPLIES ONLY TO V1 and V2:
WARNING: BusyBox is partially supported using the busybox installer, however, there are many chances that it will make your device bootloop.
Version 2:
Original Stock ROM ZSLG1(Hong Kong)
GT-I8160V2
XXLI2 stock kernel
Version 1:
DOWNLOAD:
CWM_flashable_ROM
all credit goes to dsixda for the android kitchen
sorry, dumb question again.
in cwm menu, i don't see option to unmount volume, so how could i do that??
edit: found it in "mount and storage", sorry.
Everything seems running just fine, but the battery graph seems broken (gaps in between) in battery status??
---------- Post added at 11:28 PM ---------- Previous post was at 11:14 PM ----------
and the chinese character in your rom is simplied chinese (GB) while i use tradional chinese (BIG5).
Could you list the files responsible for those tradional chinese chars and i put it back to system via sort of root explorer??
Thank you.
How do we flash the stock rom back ? Do i need to wipe cache again and stuff?
And what do i choose in odin? cuz the file is just one.. and it asks for bootloader and etc?
Bocko92 said:
How do we flash the stock rom back ? Do i need to wipe cache again and stuff?
Click to expand...
Click to collapse
The stock rom provided here is for flashing with odin (select "pda" in odin, and select the .tar file)
I'm not sure if it is needed for odin, but if you flash rom with clockwork mod, then wipe /data, /system, and /cache is a must. just as the instruction stated, wipe these 3 partitions, then format it and umount them.
Bocko92 said:
And what do i choose in odin? cuz the file is just one.. and it asks for bootloader and etc?
Click to expand...
Click to collapse
In odin, select pda and then select the .tar file you downloaded. DO NOT touch anything else. then click start.
** Please correct me if I'm wrong. **
xmlnoob said:
Everything seems running just fine, but the battery graph seems broken (gaps in between) in battery status??
---------- Post added at 11:28 PM ---------- Previous post was at 11:14 PM ----------
and the chinese character in your rom is simplied chinese (GB) while i use tradional chinese (BIG5).
Could you list the files responsible for those tradional chinese chars and i put it back to system via sort of root explorer??
Thank you.
Click to expand...
Click to collapse
doesn't seem to have the battery problem on me though, take a look at the screenshot, for the languages, sorry I think its from the CSC files, you can try flashing a CSC provided on my original ROM, but I don't know what effect does it have when flashed, I didn't add any language since I don't read chinese, thou I live here in Hong Kong
anyway, I'll try extracting the language traditional chinese and will make a CWM flashable file.
Anyway, the reason why I have low battery life is I use
CPU Governor: performance(only at 800Mhz - no deep sleep, no downclock, CPU always at 800Mhz full speed)
I/O Scheduler: noop
results? no lags in UI or browser. but battery last only 1 day, than 2days using default CPU settings.
kevincaja said:
doesn't seem to have the battery problem on me though, take a look at the screenshot, for the languages, sorry I think its from the CSC files, you can try flashing a CSC provided on my original ROM, but I don't know what effect does it have when flashed, I didn't add any language since I don't read chinese, thou I live here in Hong Kong
anyway, I'll try extracting the language traditional chinese and will make a CWM flashable file.
Anyway, the reason why I have low battery life is I use
CPU Governor: performance(only at 800Mhz - no deep sleep, no downclock, CPU always at 800Mhz full speed)
I/O Scheduler: noop
results? no lags in UI or browser. but battery last only 1 day, than 2days using default CPU settings.
Click to expand...
Click to collapse
Yea, i think the gap is actually the period of hard reboot, so its a false alarm The graph is ok without reboot.
regarding cwm flashable langauge file, i dont need to wipe data/ factory reset for that i assume?
Thank you.
---------- Post added at 08:21 PM ---------- Previous post was at 08:13 PM ----------
And by the way, the phone number(caller id??) format is now showing XXX-XXX-XX, can i edit it to show XXXX-XXXX or XXXX XXXX ??
xmlnoob said:
Yea, i think the gap is actually the period of hard reboot, so its a false alarm The graph is ok without reboot.
regarding cwm flashable langauge file, i dont need to wipe data/ factory reset for that i assume?
Thank you.
---------- Post added at 08:21 PM ---------- Previous post was at 08:13 PM ----------
And by the way, the phone number(caller id??) format is now showing XXX-XXX-XX, can i edit it to show XXXX-XXXX or XXXX XXXX ??
Click to expand...
Click to collapse
no need to wipe, just flash the CWM zip file, the caller ID is a feature of the Indonesian firmware, so we either have to edit some framework or apk's which will take sometime
kevincaja said:
no need to wipe, just flash the CWM zip file, the caller ID is a feature of the Indonesian firmware, so we either have to edit some framework or apk's which will take sometime
Click to expand...
Click to collapse
Arrh, regarding the caller id format, just changed the langauge to "English (UK)" get the job done o7.
xmlnoob said:
Arrh, regarding the caller id format, just changed the langauge to "English (UK)" get the job done o7.
Click to expand...
Click to collapse
yeah it worked, thanks
Have you ever used multimount sd app on rooited ace2?? this little app works fine on my old rooted HTC wildfire but not on ace2.
Wondering if any way to do dual mount on ace2, ie connect to computer as mass storage device while still the sdcard(s) are still mounted on the phone.
Thank you.
xmlnoob said:
Have you ever used multimount sd app on rooited ace2?? this little app works fine on my old rooted HTC wildfire but not on ace2.
Wondering if any way to do dual mount on ace2, ie connect to computer as mass storage device while still the sdcard(s) are still mounted on the phone.
Thank you.
Click to expand...
Click to collapse
haven't tried it yet, but I think it will not work, I guess...
Hey btw, can i use the zip created by this http://uot.dakra.lt/kitchen/ on your rom? i want the battery status in notification bar to show %.
Thank you.
xmlnoob said:
Hey btw, can i use the zip created by this http://uot.dakra.lt/kitchen/ on your rom? i want the battery status in notification bar to show %.
Thank you.
Click to expand...
Click to collapse
Just followed the instruction there and it generated a cwm compatible zip, installed and works nicely.
xmlnoob said:
Just followed the instruction there and it generated a cwm compatible zip, installed and works nicely.
Click to expand...
Click to collapse
I was just about to say yes, but then since you've done it, I'd say good for you!
I8160L can't
sathit2499 said:
I8160L can't
Click to expand...
Click to collapse
this ROM is for the GT-I8160 only.
App Downloading Problem
Hi
Great rom. Quite stable and scrolling works properly now as advertised (I actually thought the broken scrolling was an intentional design and not a bug, but its back to normal now thanks to the rom)
I do have 3 questions / problems though.
1. Not sure if anyone else has this problem, but after flashing, I am unable to install any apps from the google market when on wifi. I can browse the market and websites easily, but the downloading bar never initiates. Once I switch to 3g, the app starts downloading. Before I flashed this rom, wifi downloading of apps from google play worked on the same network.
2. When I enter recovery mode (volume up + home + power) my recovery mode is "Android Recovery 3e" not CWM recovery. As such, I only have the options to flash a .zip or wipe data / cache. Is this normal. I tried flashing Antsm's update_su and it remains android recovery.
3. This is minor. But when I try and use LMT launcher (http://forum.xda-developers.com/showthread.php?t=1330150) with the pie buttons, only the home button works. The other buttons do not. They worked fine before I flashed this mod. Not sure if anyone else has tried LMT with this rom?
4. Will kernels or roms based off of other firmwares work with our HK baseband and still have working scrolling on 3g/phone?
Thx alot for your support for the HK firmware
chzyken said:
Hi
Great rom. Quite stable and scrolling works properly now as advertised (I actually thought the broken scrolling was an intentional design and not a bug, but its back to normal now thanks to the rom)
I do have 3 questions / problems though.
1. Not sure if anyone else has this problem, but after flashing, I am unable to install any apps from the google market when on wifi. I can browse the market and websites easily, but the downloading bar never initiates. Once I switch to 3g, the app starts downloading. Before I flashed this rom, wifi downloading of apps from google play worked on the same network.
2. When I enter recovery mode (volume up + home + power) my recovery mode is "Android Recovery 3e" not CWM recovery. As such, I only have the options to flash a .zip or wipe data / cache. Is this normal. I tried flashing Antsm's update_su and it remains android recovery.
3. This is minor. But when I try and use LMT launcher (http://forum.xda-developers.com/showthread.php?t=1330150) with the pie buttons, only the home button works. The other buttons do not. They worked fine before I flashed this mod. Not sure if anyone else has tried LMT with this rom?
4. Will kernels or roms based off of other firmwares work with our HK baseband and still have working scrolling on 3g/phone?
Thx alot for your support for the HK firmware
Click to expand...
Click to collapse
ANSWERS:
To 1: I to, experiences that problem, still fixing it
To 2: You didn't flash the kernel properly, try flashing a custom kernel again.
To 3: Don't know what launcher is that.
To 4: Yes it will, we only need to copy a some specific files for 3G/GSM/Network to work.
kevincaja said:
ANSWERS:
To 1: I to, experiences that problem, still fixing it
To 2: You didn't flash the kernel properly, try flashing a custom kernel again.
To 3: Don't know what launcher is that.
To 4: Yes it will, we only need to copy a some specific files for 3G/GSM/Network to work.
Click to expand...
Click to collapse
In that case, I'll wait for that wifi fix. Will keep using the this rom in the meantime.
I'll wry about cwm next time I need to flash.
And the launcher problem started working but itself. Don't think it's a rom problem. Thx again!
Sent from my GT-I8160 using xda app-developers app
And again, here I am with the ROM for GT-I8190L
Tweaks:
Code:
- Ext4 Optimization Tweaks
- Many build.prop tweaks
- Battery tweak
- sqlite_optimize
- Darky ziaplign
- V6 120MB LMK Addon
- Bravia Engine
- xLoud Engine
- 4cyl Turbo Engine by [URL="http://forum.xda-developers.com/member.php?u=4741717"]Exit_Only[/URL]
- A lot of Samsung's bloatware removed
Instructions
1. download the zip files
2. put the zip files onto your sd card
3. reboot into recovery
4. flash BenzROM-V2L.zip file from your sd card
5. reboot.
ROM is wipe now for better compatibility. Backup your data before proceeding.
Download Link - ROM V2 <<< Click.
Thanks to Chainfire for his root.
Thanks to leather.face for his script.
Thanks to my country neighbour dariolob for his DMod V3 build.prop tweaks and his mods.
Thanks to Exit_Only for his 4cyl Turbo Engine tweaks, awesome work!
Thanks to vonuzu for his Call Recording mod
Thanks to cheech01 for his StatusBar mods.
ROM has been updated
Added: A custom power menu with Download and Recovery options.
Added: AOSP Lockscreen
Added: Long press back button to kill an app
Added: Automatic Battery Calibration on first flash
Added: Colorized days in S-Planner
Disabled: Contacts joining limit
Disabled: OTA Service and removed "Software Updates" from Settings
Disabled: Phone number auto-formatting
Enabled: Sub-symbols on stock keyboard - Long press to insert symbol
Enabled: Scheduled messages in stock SMS app
Enabled: MMS download even with data off
Enabled: Folders for messages
Modded: In-call vibration for notifications enabled
Modded: Inverted email app from black to white - much more readable
Modded: No MMS conversion,no contact limit, real timestamps with sent time instead of received
Modded: Added camera shutter sound toggle in settings
Modded: Camera is now available during a call
Modded: Enabled emojis in stock browser
Modded: Added confirmation prompt when exiting from browser
Modded: Added "Exit" button to browser in menu
Modded: Home browser page instead of about:blank when opening a new tab
Fixed: SuperSU root not working after flash
Fixed: Some scripts not working properly
Fixed: Radio not working for some users after flashing
Fixed: Auto-Wipe will NOT wipe your internal storage anymore
Changelog
Code:
- Updated 4cyl Turbo Engine to v0.3.2_r1
- Completely redid the updater-script (Thanks to [URL="http://forum.xda-developers.com/member.php?u=4741717"]Exit_Only[/URL] for his help)
A Reminder!
Please don't send me PMs about tech support! If you do, they will be ignored and deleted immediately. Ask your questions here.
Awesome! Thanks! I'm at work right now but will test it tonight.
Hello...This it a amazing work. I have a question... I install this rom perfect, but i change the dpi to 170. In this case everything works perfect but the skin for dial can't arrange to the new format...Exists some way to fix this ? Thanks you...
Flashed. All great. Lost root at first but flashed the file and all is well. Thank you very much!
I have one question. I mean I backed up, and all is fine but my internal sd card got wiped, unlike it should. Is that part of your wiping process or is it something with the s3 mini. Just for future reference.
DAMADRIC said:
Hello...This it a amazing work. I have a question... I install this rom perfect, but i change the dpi to 170. In this case everything works perfect but the skin for dial can't arrange to the new format...Exists some way to fix this ? Thanks you...
Click to expand...
Click to collapse
No there's no way to fix this
swagmeister said:
Flashed. All great. Lost root at first but flashed the file and all is well. Thank you very much!
I have one question. I mean I backed up, and all is fine but my internal sd card got wiped, unlike it should. Is that part of your wiping process or is it something with the s3 mini. Just for future reference.
Click to expand...
Click to collapse
My wiping process wipes /data and /cache partitions and nothing else. I don't know what that was.
ROM updated, first post updated.
Hello.
Thanks for your time and work...Looks amazing.
I solve the problem with the dpi dialer installing a exdialer from google play, and work excellent...
In another point i reinstall the update for this rom ,but when this finish i begin and dont show the activity for phone, nothing appear to introduce the sim code and the phone its deactivate...Its this normal ?
Thanks Doug...
Is your network working, can you call, send text messages?
yes, with the file before , i installed and everything its ok, with this i can't use the phone services...
Im from Costa Rica, what its the exactly rom or baseband, that i need to install to work ok with 850 3G line. Or what it the correct baseband stock rom that i need to download to work normally...
Help please....
Benzonat0r said:
My wiping process wipes /data and /cache partitions and nothing else. I don't know what that was.
Click to expand...
Click to collapse
Damn that's wierd. I'll be more carefull next time.
New version? Sweet! Thanks
DAMADRIC said:
yes, with the file before , i installed and everything its ok, with this i can't use the phone services...
Click to expand...
Click to collapse
I didn't do anything drastic to the ROM I've just added some symlinks to make root and some scripts work.
It should work.
Benzonat0r said:
I didn't do anything drastic to the ROM I've just added some symlinks to make root and some scripts work.
It should work.
Click to expand...
Click to collapse
I think that i was install before a wrong area stock rom. Do you know or recommend what is the better to install this device to work with 3g 850 band, in Costa Rica and i can install your amazing rom?....
You can flash modem.bin from your original stock ROM. Extract it uzing 7zip or WinRAR, upload it somewhere and paste the link here, I'll make it flashable via Odin.
A question a bit off-topic... is there anyway to know which mods can be installed on any S3 Mini (I8190, I8190L, I8190N) and which mods can't? I'm guessing that anything that has to do with kernel has to be very device specific, but can I flash any custom recovery (CWM, TWRP) regardless of the phone's version?
Well for instance, the L version doesn't have NFC and the N version does, they could differ in lots of things so no you can't just flash anything on it.
Benzonat0r said:
Well for instance, the L version doesn't have NFC and the N version does, they could differ in lots of things so no you can't just flash anything on it.
Click to expand...
Click to collapse
Alright, thanks. I don't really need the custom recovery right now but I wanted to be sure for future reference.
Modem Bin
Benzonat0r said:
You can flash modem.bin from your original stock ROM. Extract it uzing 7zip or WinRAR, upload it somewhere and paste the link here, I'll make it flashable via Odin.
Click to expand...
Click to collapse
Hello.
Thanks for your help...
Well i dont have a modem.bin from a original stok, but i used and install very good its from stock rom from TTT.
You can have access by this url https://docs.google.com/folder/d/0B9a5cmEC8OPYSFQ4eTVhY3hnRjg/edit?usp=sharing
Please let me know if you can give me this file to install via odin to test with your rom.
Thanks for your help again.
My skype: damadric
OsoAlgo said:
Alright, thanks. I don't really need the custom recovery right now but I wanted to be sure for future reference.
Click to expand...
Click to collapse
I added CWM recovery with no issues on my L.
DAMADRIC said:
Hello.
Thanks for your help...
Well i dont have a modem.bin from a original stok, but i used and install very good its from stock rom from TTT.
You can have access by this url https://docs.google.com/folder/d/0B9a5cmEC8OPYSFQ4eTVhY3hnRjg/edit?usp=sharing
Please let me know if you can give me this file to install via odin to test with your rom.
Thanks for your help again.
My skype: damadric
Click to expand...
Click to collapse
http://www.4shared.com/file/LdRUFrLL/modemtar.html?
Flash this via Odin.
Benzonat0r said:
http://www.4shared.com/file/LdRUFrLL/modemtar.html?
Flash this via Odin.
Click to expand...
Click to collapse
Hello ...
First ...Thanks for all your help...
Only for records.
I have a i8190L, i insist to install the version...
The first version with V3 in the name for i8190L ,works perfect,
In the second update , i try to install by any ways and nothing inclusive with your incredible help of the MOMEM in tar file, and nothing , ever startup with no phone detect.
Then strange but i try to install the version for i8190 V3 in the another post and works wonderfull, even with the updates.
Strange but i would to continue enjoy and testing your work and this version works without problem.
Thanks for all your help and would track your work...
Hi!
So far I have found these problems in Baidu ROM 54.
DOWNLOAD:
http://nj.bs.baidu.com/platform-rom/102_0_I8552_R_2.2.54.61_20140808172629.zip
Doesn't read SD card
Shows no network connectivity for the connection. (I have AT&T)
Can't open Google Play store (Even after applying Market Unlocker fix)
Does someone know how to fix these issues?
noman.rasheed said:
Hi!
So far I have found these problems in Baidu ROM 54.
DOWNLOAD:
http://nj.bs.baidu.com/platform-rom/102_0_I8552_R_2.2.54.61_20140808172629.zip
Doesn't read SD card
Shows no network connectivity for the connection. (I have AT&T)
Can't open Google Play store (Even after applying Market Unlocker fix)
Does someone know how to fix these issues?
Click to expand...
Click to collapse
Hello .. in my V54 the only problem was that in Xposed not work .... had to switch to the V53 for the operation .. make the wips, and try again.:good:
GlauberMSP said:
Hello .. in my V54 the only problem was that in Xposed not work .... had to switch to the V53 for the operation .. make the wips, and try again.:good:
Click to expand...
Click to collapse
Hey, which tool do you use to install the ROM?
noman.rasheed said:
Hey, which tool do you use to install the ROM?
Click to expand...
Click to collapse
Try this was that I edited to correct the status7 and took some apps Baidu ..:good:
https://drive.google.com/file/d/0B6t2vRswL0dHcVVCRk9aQ2t1ZmM/edit?usp=sharing
GlauberMSP said:
Try this was that I edited to correct the status7 and took some apps Baidu ..:good:
https://drive.google.com/file/d/0B6t2vRswL0dHcVVCRk9aQ2t1ZmM/edit?usp=sharing
Click to expand...
Click to collapse
I downloaded and install the ROM provided by you, but it still has the same problems;
No network connectivity
Not reading SD card
and Google Play store (even after applying Market Unlocker fix)
noman.rasheed said:
I downloaded and install the ROM provided by you, but it still has the same problems;
No network connectivity
Not reading SD card
and Google Play store (even after applying Market Unlocker fix)
Click to expand...
Click to collapse
Very strange dude that happens to your device ... on my already instelei several times and all ok, running everything except the Xposed V54, V53 has the Waze, the rest all ok, I apologize and can not help !!
its not possible flash v54 here , i flashed 53(remember to delete lines from META-INF/com/google/android ) and updated to 54 in options (works only on chinese cwm)
i don't have backup from efs folder :confused now my sim works only in the baidu rom
OSTUNG said:
its not possible flash v54 here , i flashed 53(remember to delete lines from META-INF/com/google/android ) and updated to 54 in options (works only on chinese cwm)
i don't have backup from efs folder :confused now my sim works only in the baidu rom
Click to expand...
Click to collapse
You need to flash another CWM and then flash the BAIDU in time to reboot select Disable Recovery fix, so this stuck in CWM CHINESE):good:
http://forum.xda-developers.com/showthread.php?t=2704951
3. Wipe Data/Factory Reset.
4. Wipe Cache Partition.
5. Wipe Dalvik Cache.
6. Install Zip From SDCard And Choose "Baidu Cloud Rom-1.zip".
7. Wait Till It Flash.
8. You'll have one more confirmation to "Disable Recovery fix". Do not ignore and cancel that. Go ahead and Hit Yes, Disable recovery fix. This step will make the CWM stay and will not flash the stock recovery of Baidu Rom over CWM to the device.
9. Reboot And Enjoy.
I m also facing the network issue... When i connect to mobile data whether in 3g or 2g netwoke gets disapper and after some time network comes back bt mobile data is turn off automatic by itself... I tried several vesrions on thi rom bt i faced this same network issue... I went back on stock rom... Any body have the solution for my problm?