FLASH COUNTER ....what exactly it is??? n why it is increasing every time we flash??? does we really need to care for it?? sorry for newbie quest..
thanks in advance..
It's a counter that tells how much times you've flashed custom stuff. If you have a counter different from zero it means that your warranty is voided. Anyway, you can get a usb jig from ebay to reset the counter to zero in case you need to get it to zero. So you shouldn't worry too much about it.
thanx bro...i was just wondering what is the limit of flashing ??? i mean at the max i can flash upto this much times...
It counts the number if times you flash non-official firmware or kernel etc.
It increases only when you flash a non-official firmware or kernel etc.
You don't really need to care for it. Unless you find your phone bricked one day and there is no way of reviving it and you decide to go to samsung service center and he says get lost you have installed non-official firmware.
This involves bricking the phone (not likely unless you actually decide not to read and do something foolish) samsung galaxy series is one of the less likely phone to be bricked.
This involves you actually going to the service center you may as well read more on the forums here and there will be a solution to your problem.
This involves the person in the service center to know that he is not to accept phones flashed with non-official firmware. If more people read and flash then less bricked phones, then less trips to service center, then less chances the technician knows this.
So moral of the story read more and stop asking things that are already explained like what is flash counter.
I don't believe there's a limit. The counter will just keeping adding up untill you reset it (if you do reset it)
you can flash 1 million times.
hmmm...got it..thanx for quick replies friends...
Suspecting the counter is a signed integer, there will be absolutely NO problems up to 2,147,483,647 flashes.
After that it'll either still be fine until 4,294,967,295 flashes (if the "signed" assumption was wrong) or just overflow and show funny stuff like "Custom Binaries: -1" or reset back to zero by itself.
/geekpost xD
How to check the flash counter????
asirigaya said:
How to check the flash counter????
Click to expand...
Click to collapse
Just go to download mode.
(VOLUME-DOWN + HOME + POWER while the phone is off)
Related
hey guys,, is there any solution to reset custom counter softly without usb jig??
soMeee said:
hey guys,, is there any solution to reset custom counter softly without usb jig??
Click to expand...
Click to collapse
Not yet.
/10 char
soMeee said:
hey guys,, is there any solution to reset custom counter softly without usb jig??
Click to expand...
Click to collapse
Jigs are crazy cheap on ebay. I got one for < $3.
so, where is the software using in usb jig,, which we can use without using jig
Nope. Probably never will be.
Edit to add - There is no "software using in usb jig which we can use without using jig". You switch the phone off, plug the jig in the usb port on the phone & it resets the flash counter/changes Custom Binary Download to "no" & changes the Custom Binary to "Samsung Official" when the phone is in download mode. No software required.
Do a search on eBay for "Samsung Galaxy S2 jig" (without the "").
does it cancel the warranty? if I go to Samsung services and my cus. counter counted 1 unofficial ROM??
soMeee said:
does it cancel the warranty? if I go to Samsung services and my cus. counter counted 1 unofficial ROM??
Click to expand...
Click to collapse
Search. Read.
No.
EDIT: No. If you need it, you already voided your warranty. The jig is a tool to get your phone back to the state where your warranty is still intact. You could find that yourself, if you used the 'Search' button and read the threads you find there. Or hell, Google even. Seriously, XDA isn't a place for this kind of crap.
The information is in the forums, if you want it->READ THE FORUMS.
If you go to Samsung service, and they see that your custom counter is set to 1 then your warranty is void. The jig resets this counter to 0.
The moment you flash custom roms or kernels on your phone you void your warranty, yes. And yes, if they see the counter at 1 or showing anything other than Samsung Official in download mode, they more than likely will not fix it under warranty.
However if you are able to put stock firmware back on your phone, get rid of any apps that might give whomever fixes it a clue that you've rooted it, and use a jig to reset the flash counter, there's a fair chance (not 100% tho mind you) you might be able to have it fixed under warranty.
To be perfectly honest, if you want to have a 100% chance of having anything that goes wrong with the phone fixed under warranty, do not put custom firmware on your phone. At all. Ever.
in case of me, I bought it from someone on ebay and did not know that till today
I have a few questions, I'll put them up right away so the impatient may avoid reading my boring story. Beneath the questions are my explanation.
1. It seems to me the flash counter only goes up when I flash non-original firmware. I've flashed twice; once to root, then once again to go back to stock. My counter says 1. Am I correct in assuming this, then?
2. My phone came with astrange and, I think, not widely used firmware called XWKG1. Can I upgrade to ICS using any method, ie. will any ICS-ROM work with my phone?
3. Then I can root, and use Triangleaway to reset flash-counter, right?
And if the answer to question #1 is "yes", I could flash back to stock and have no warranty problems?
Backstory:
I - like many others - downloaded some ROM to get root on my phone. That's all I wanted, just root, no custom UI or anything, so I just downloaded something called CF I think? I'm not very knowledgable about all this, so bear with me.
Now the USB connector and battery is starting to get real weird. In short; my phone thinks USB cable is connected all the time; my phone won't start (says battery is too hot) unless I have a charger plugged in; strange driver issues when trying to connect the phone to a PC, the device is not recognized about 80% of the time; battery drains SUPER quickly. And more probably.
Now this sounds like a hardware issue to me, and should be covered by the warranty no matter if I choose to root my phone or not. But I'm worried Samsung may not share my opinion there. I've flashed back to stock firmware I got with my phone (XWKG1 - I bought my phone from a French company operating in Norway called Pixmania, which gave me this strange version), and the yellow triangle is gone. But flash counter says 1. This could be a problem.
I'd send it back to pixmania straight away. I'm in Norway, I've used pixmania abefore, they're quick and helpful, and I'd guess they'll replace it straight away.
To be honest, I can't remember if stock flashing increases the counter or not. Buy a jig anyway, they're cheap and useful.
Don't think your firmware's that strange, pretty sure I had XWKG1 at some point. Old yes, strange no.
Thanks for the answer. So Pixmania won't just send it to Samsung who will reject it? Have you tried sending rooted phones to them? My phone doesn't have any external damage, but it is currently not covered under Samsungs warranty!
Also, don't know if an USB jig would work since the phone's USB-port is so broken.
reking said:
Thanks for the answer. So Pixmania won't just send it to Samsung who will reject it? Have you tried sending rooted phones to them? My phone doesn't have any external damage, but it is currently not covered under Samsungs warranty!
Also, don't know if an USB jig would work since the phone's USB-port is so broken.
Click to expand...
Click to collapse
Yep, rooted my brother-in-law's SGS last year. He returned it to pixmania because his home button wasn't working, got a replacement within a week. He'd forgotten it was rooted, but pixmania either didn't notice or didn't care.
Assuming you flashed via a USB/PC connection before , it's probably worth the risk to try 2 and 3. Or if you don't want to risk your USB port, try Mobile Odin.
reking said:
I .
1. It seems to me the flash counter only goes up when I flash non-original firmware. I've flashed twice; once to root, then once again to go back to stock. My counter says 1. Am I correct in assuming this, then?
Thats what it is .
2. My phone came with astrange and, I think, not widely used firmware called XWKG1.
Its not strange .
Can I upgrade to ICS using any method, ie. will any ICS-ROM work with my phone?
When ICS is released it should upgrade .
But not if you root or put custom firmware Kies may no longer offer the iCS upgrade . You wil have to flash a stock ICS firmware .
3. Then I can root, and use Triangleaway to reset flash-counter, right?
And if the answer to question #1 is "yes", I could flash back to stock and have no warranty problems?
Yes
Now this sounds like a hardware issue to me, and should be covered by the warranty no matter if I choose to root my phone or not. But I'm worried Samsung may not share my opinion there. I've flashed back to stock firmware I got with my phone (XWKG1 -
Warranty void if custom rom and that included beta ICS warranty void if phone rooted warranty void if custom rom counter above zero .Thats the official Samsung letter to service centres .
jje
Click to expand...
Click to collapse
Hi there!
Actually, I've stopped trying to ressurect my phone about a month ago, but... maybe someone can help
Ok, what happened:
I was at exam and must shut my phone off. I did it. Some seconds later it booted again. So, I had to turn it off by holding the power button. After that it doesn't boot anymore.
Now the "facts":
- It was the Lite'ning Rom (I think 2.6) with the Kernel incl. as it bricked.
- It boots up to the yellow triangle and stops there.
- If I want to charge it - I see just a waiting-circle (like in windows), but it doesn't move at all.
- I can enter the Download mode, but only if I hold Volume Down + Power Button. If I hold the VolumeDown+Home+Power Button - it's just starting without entering the download mode.
- I can't enter the recovery mode. It's just gone...
- Kies doesn't see the phone at all.
- Odin see it and I can flash it. I can flash all the things I want: bootloader, kernel, pda. I can re-partition it, BUT:
- Now the interresting thing: Odin flash it and says, that all was fine. But nothing happens... Actually, I've already tried to "kill" it with the 3-part ROM for 9100G, but Odin says, that all was ok and nothing happens with the phone at all. It just ignoring all the flashs I tried.
- I have the USB-Jig, but it start the "Factory mode", and... see the point above.
- Already tried about 10-15 Rom (1-parted and 3-parted), with bootloaders and pits etc. Nothing happens.
I had the phone just for 3 months, and... yeah, 500€ are gone. I can't send it to Samsung service, because of triangle and counter > 0. And I can't remove this triangle and set the counter back.
Anyone have any ideas I can try? Maybe someone already heard about issue like that? Is it the famous "eMMC brick"?
Thx in advance!
I don't know if this is due to the EMMC bug. But it sure does sound like a hardware issue.
Have you tried flashing Factory / Stock firmware via Odin? I had a similar issue some time back with my Galaxy Tab but flashing stock firmware, rebooting to recovery and clearing cache etc then fixed the issue.
Good luck man!
Maybe send it in for warranty service/replacement & play dumb in the first instance. Always a chance they won't care/notice you trashed it. If they do & decide to charge you, ask for a quote & for the phone back. Then take the phone to local mobile repair shops & see how much they want for repairing the phone. You can also then compare the costs of having Samsung/authorised repairer or local mobile repair shops with the costs of having the phone JTAG'd (assuming it can be JTAG'd). Lots of JTAG repairers can be found with a Google search, not necessarily in your country, but will still likely be cheaper than having Samsung/authorised repairer fix it.
Try to flash a bootloader for a different device (Note for example), and after that to repartion the device also with pit for Note or something similar. I think that there is a good chance that you succeed in killing the phone completely, and then you can send it to service and play dumb.
Find someone with a riff box and get it j-taged
Sent from my GT-I9100 using Tapatalk 2
A331709 said:
Have you tried flashing Factory / Stock firmware via Odin?
Click to expand...
Click to collapse
Yes, already tried some different stock firmwares, always the same thing - just nothing happens and Odin is lucky and saying "all was fine".
pilgrim011 said:
Try to flash a bootloader for a different device (Note for example), and after that to repartion the device also with pit for Note or something similar. I think that there is a good chance that you succeed in killing the phone completely, and then you can send it to service and play dumb.
Click to expand...
Click to collapse
Already tried with G-Version of SGS2, but that didn't work. But I will try it with Note's bootloader and pit. Thx!
MistahBungle said:
Maybe send it in for warranty service/replacement & play dumb in the first instance. Always a chance they won't care/notice you trashed it. If they do & decide to charge you, ask for a quote & for the phone back. Then take the phone to local mobile repair shops & see how much they want for repairing the phone. You can also then compare the costs of having Samsung/authorised repairer or local mobile repair shops with the costs of having the phone JTAG'd (assuming it can be JTAG'd). Lots of JTAG repairers can be found with a Google search, not necessarily in your country, but will still likely be cheaper than having Samsung/authorised repairer fix it.
Click to expand...
Click to collapse
I've already called JTAG-Service I found in my country, but the guy on the phone said "you can send it to us, we will try to fix the issue, but you will see - you will get your device back without any changes." In addition, he said, that my phone has some bad sectors in header of internal memory and it's nothing to do with it. The only option is to change the mainboard.
I'll try to kill it with Note's firmware, if it's not going to work - will try to send it for repair. But the chance, that guys from samsung will ignore the triangle and counter ist actually... yeah, it low ^^
Thx again for the advices!
//edit:
tried the Note's bootloaders - the phone accept it, I see the progress-bar on phone's screen, but after reboot it stucks again on triangle.
tried this guide again - doesn' help at all.
looks like the advice from MistahBungle is the last hope
Hi everyone here on xda!
I've got an international, unbranded GT-i9300 16GB bought here in Italy (so I suppose it's the european version, stock roms I flashed ended with _ITV) on August 2012, so it should be still covered by warranty.
Yet there isn't any Samsung center nearby, so I suppose I should be sending it and it will probably take some time to even have an answer.
My phone was charging, I saw the led blinking with a blue light, so I tried to unlock it. No success.
A few hours before, the phone took a screenshot by itself without even touching it. (it took it the same way it does when you press POWER+HOME)
The situation is:
If I plug it to the charger, the battery animation appears, but is frozen. I don't know if it's charging or not.
The phone doesn't boot, it only shows the Samsung boot text.
I can't power off the phone, I have to remove the battery. It only reboots when I press the Power button.
I can't enter CWM Recovery nor the stock recovery, Odin fails to flash anything because says PIT partition is missing.
I can enter Download Mode, and it says:
Odin mode
Product Name:
Custom binary download: No
Current Binary: Samsung Official
System Status: Custom
I have read countless topics but I'm unsure if there's a solution, I only saw hundreds of people struggling to flash a ROM.
And, I'm a bit unsure on what to do now, do you know the answer to any of these questions?
1) Is there a solution to this problem, something that I can do at home?
2) Is this a case of Sudden Death Syndrome? Should it be caused by a motherboard failure?
3) If I try or manage to flash a new PIT file (unlikely, I saw that everyone with this issue couldn't) and something goes wrong, can the situation get any worse?
4) Should Samsung repair it since it should be under warranty, even if there's that Custom under System status? Should I insist if it refuses to?
5) If someone managed to solve this issue, did they receive a new phone, or the same phone with their own data? Do they also make a deep clean?
6) What is Samsung's average time to fix this issue when it receives the phone?
7) Is there a way to access the phone's internal memory to recover some data in this situation?
8) Which PIT file should I be flashing? Does it make sense to flash just the PIT file, or should I also flash a 3-file stock rom at the same time? Did someone fix this issue by doing so?
Thanks in advance for your time and your patience
EDIT:
I've been searching around the forums and i see that if Odin is giving that error there's nothing you can do. Just send it to your nearest service center for repair.
NeatWolf said:
Hi everyone here on xda!
I've got an international, unbranded GT-i9300 16GB bought here in Italy (so I suppose it's the european version, stock roms I flashed ended with _ITV) on August 2012, so it should be still covered by warranty.
Yet there isn't any Samsung center nearby, so I suppose I should be sending it and it will probably take some time to even have an answer.
My phone was charging, I saw the led blinking with a blue light, so I tried to unlock it. No success.
A few hours before, the phone took a screenshot by itself without even touching it. (it took it the same way it does when you press POWER+HOME)
The situation is:
If I plug it to the charger, the battery animation appears, but is frozen. I don't know if it's charging or not.
The phone doesn't boot, it only shows the Samsung boot text.
I can't power off the phone, I have to remove the battery. It only reboots when I press the Power button.
I can't enter CWM Recovery nor the stock recovery, Odin fails to flash anything because says PIT partition is missing.
I can enter Download Mode, and it says:
Odin mode
Product Name:
Custom binary download: No
Current Binary: Samsung Official
System Status: Custom
I have read countless topics but I'm unsure if there's a solution, I only saw hundreds of people struggling to flash a ROM.
And, I'm a bit unsure on what to do now, do you know the answer to any of these questions?
1) Is there a solution to this problem, something that I can do at home?
Try new battery .
2) Is this a case of Sudden Death Syndrome? Should it be caused by a motherboard failure?
Possible reads the sds thread
3) If I try or manage to flash a new PIT file (unlikely, I saw that everyone with this issue couldn't) and something goes wrong, can the situation get any worse?
Yes
4) Should Samsung repair it since it should be under warranty, even if there's that Custom under System status? Should I insist if it refuses to?
No warranty is void .
If someone managed to solve this issue, did they receive a new phone, or the same phone with their own data? Do they also make a deep clean?
Data is on the motherboard and lost .
8) Which PIT file should I be flashing?
The one for your firmware.
jje
Sent from my GT-N8010 using xda premium
Click to expand...
Click to collapse
Well then, thanks for your answers and your time
I think I have no choice... I recovered my phone from various other situations, but I suppose I should have updated my Android version sooner, I was about to do it soon, matter of days.
It still bugs me the fact that I'll have to pay 200$ for a defect that is notoriously not related to the use of the phone, but to a production vice/bug.
Isn't really a way to restore my device status to Samsung Official in this state?
NeatWolf said:
Well then, thanks for your answers I think I have no choice... I recovered my phone from various other situations, but I suppose I should have updated my Android version sooner, I was about to do it soon, matter of days.
It still bugs me the fact that I'll have to pay 200$ for a defect that is notoriously not related to the use of the phone, but to a production vice/bug.
Isn't really a way to restore my device status to Samsung Official in this state?
Click to expand...
Click to collapse
It does not boot how will service centre know its rooted . SDS expect a motherboard swap .
Their is an XDA post by Adam Outler that states that custom rom or root does not void your warranty but Samsung say it does .
jje
JJEgan said:
It does not boot how will service centre know its rooted . SDS expect a motherboard swap .
Their is an XDA post by Adam Outler that states that custom rom or root does not void your warranty but Samsung say it does .
jje
Click to expand...
Click to collapse
Thanks
I haven't found the article but found this one about Flashing&Rooting the phone not invalidating the warranty in EU that may be interesting for future readers:
[INFO] Rooting and Flashing don't void the warranty
I'm a bit more optimist now, but sadly I live in Italy so everything can go wrong doesn't matter what the EU says.
I'll keep you posted on my experience, for future reference.
NeatWolf said:
Thanks
I haven't found the article but found this one about Flashing&Rooting the phone not invalidating the warranty in EU that may be interesting for future readers:
[INFO] Rooting and Flashing don't void the warranty
I'm a bit more optimist now, but sadly I live in Italy so everything can go wrong doesn't matter what the EU says.
I'll keep you posted on my experience, for future reference.
Click to expand...
Click to collapse
sorry deleted because wrong pit file
I recently hard bricked my phone after flashing CyanogenMod 10. I know that CyanogenMod doesn't even touch the bootloader but somehow I ended up with a very expensive paperweight. But luckily Samsung Care replaced the motherboard in my phone and now my phone is good as new. But that doesn't mean that I'm gonna refrain from flashing or rooting. I've been rooting since 2 years now & this is the first time I've ever hard bricked the phone. But this experience really did scare me. So, to avoid it, in future, I wanna know all about hard brick. So please answer my following questions:
1) What exactly is hard brick?
2) Possible ways in which one could end up with a hard bricked phone? (Mainly SGS3)
3) Possible ways of recovery from hard brick?
Thanks a lot in advance. I want this thread to be a complete source of information to anyone who is new to flashing & needs DO's & DONT's of flashing properly.
saurabh_goyal93 said:
I recently hard bricked my phone after flashing CyanogenMod 10. I know that CyanogenMod doesn't even touch the bootloader but somehow I ended up with a very expensive paperweight. But luckily Samsung Care replaced the motherboard in my phone and now my phone is good as new. But that doesn't mean that I'm gonna refrain from flashing or rooting. I've been rooting since 2 years now & this is the first time I've ever hard bricked the phone. But this experience really did scare me. So, to avoid it, in future, I wanna know all about hard brick. So please answer my following questions:
1) What exactly is hard brick?
2) Possible ways in which one could end up with a hard bricked phone? (Mainly SGS3)
3) Possible ways of recovery from hard brick?
Thanks a lot in advance. I want this thread to be a complete source of information to anyone who is new to flashing & needs DO's & DONT's of flashing properly.
Click to expand...
Click to collapse
1: You hardbricked your phone if you can't power it on at all. That means no Recovery and no Download mode. No lifesign at all.
A softbrick on the other hand is the situation that your phone powers up but stucks at a certain point and you can`t boot it up to the OS. However Recovery and/or Download Mode is still accessible, so you can flash a ROM, which usually solves the problem.
2: If you screw up the Bootloader. How can you screw up the bootloader? If you flash the bootloader through Odin there is always the chance that during the flash process your OS crashes or you by accident disconnect the USB cable. Although I heard cases where people hardbricked their phones during flashing a ROM through CWM (like in your case). This however doesn't make sense because like you already said most ROMs don't touch the Bootloader, so even if something happens during the flashing process, you should still be able to get at least to Download Mode. So with cases like that I assume that it is a hardware failure of some sort.
3: If you screwed up the bootloader then you can bring your phone back to life by using JTag. There are people who do this for a little money, so if you don't have warranty anymore, this is the way to go because it's a lot cheaper than replacing the mainboard.
Thanks a lot
Thanks for such an informative reply. Really appreciate it.
Scarface1991 said:
1: You hardbricked your phone if you can't power it on at all. That means no Recovery and no Download mode. No lifesign at all.
A softbrick on the other hand is the situation that your phone powers up but stucks at a certain point and you can`t boot it up to the OS. However Recovery and/or Download Mode is still accessible, so you can flash a ROM, which usually solves the problem.
Click to expand...
Click to collapse
I know the symptoms. But what exactly is a hard brick? Hardware is burned out? Software isn't able to communicate with hardware? Like, what happens exactly inside the phone?
Scarface1991 said:
2: If you screw up the Bootloader. How can you screw up the bootloader? If you flash the bootloader through Odin there is always the chance that during the flash process your OS crashes or you by accident disconnect the USB cable. Although I heard cases where people hardbricked their phones during flashing a ROM through CWM (like in your case). This however doesn't make sense because like you already said most ROMs don't touch the Bootloader, so even if something happens during the flashing process, you should still be able to get at least to Download Mode. So with cases like that I assume that it is a hardware failure of some sort.
Click to expand...
Click to collapse
How can one screw up during bootloader update/flash? The process takes like 5 seconds!!
Plus Samsung Galaxy S3 GT-I9300 doesn't allow flashing of any other device's bootloader.(Yeah yeah, I was about to flash GT-I9305's bootloader on mine by mistake!) Odin stops automatically during flashing. I don't know whether it is a security feature by phone or odin but whatever it is, it ROCKS!
saurabh_goyal93 said:
Thanks for such an informative reply. Really appreciate it.
I know the symptoms. But what exactly is a hard brick? Hardware is burned out? Software isn't able to communicate with hardware? Like, what happens exactly inside the phone?
Click to expand...
Click to collapse
The Bootloader is the first thing that is loaded when you power up your phone. If you screw up the bootloader your phone won`t boot up at all. This is caused by the user of the phone, that`s why people say: "Your hardbricked your device".
If your hardware fails to function properly because of whatever reason then it`s not a hardbrick but simply a hardware failure. It is in most cases not caused by the user (except if someone would be dumb enough to overclock CPU/GPU to a ridiculous high level)
How can one screw up during bootloader update/flash? The process takes like 5 seconds!!
Plus Samsung Galaxy S3 GT-I9300 doesn't allow flashing of any other device's bootloader.(Yeah yeah, I was about to flash GT-I9305's bootloader on mine by mistake!) Odin stops automatically during flashing. I don't know whether it is a security feature by phone or odin but whatever it is, it ROCKS!
Click to expand...
Click to collapse
Look at the XDA Q&A Threads. There are several cases a day where people have problems flashing something on their phones because Odin fails for some reason. That`s why I would use Odin only when it`s really necessary. When I had my first Smartphone (Samsung Wave) I flashed a lot of stuff on it and one time the flash tool just reported an error and that`s it (bootloader was screwed). I don't know why it failed until this day. So flash a bootloader only if it`s absolutely necessary because this is the most dangerous thing that you can do to your device.
I hard bricked my phone by rushing to install a new ROM before i had to leave for work. Later when I retraced my steps I realized that I made a stupid and critical mistake. I installed a ROM for a Galaxy S2 onto my Galaxy S3.
The installation appeared to be going smoothly. When it was complete I pressed the "reboot now" button. My phone turned off and never turned back on.
Now the phone has no signs of life. No Power, No Recovery, No download mode, No drivers when I plug it into a computer USB port. The computer does recognize that some kind of USB device is connected to it though. Which is what makes me believe that the phone is not dead and must be repairable.
I've done research and it appears that there are 3 options. (Please let me know if there are more)
Option #1: Pay someone to perform a JTAG repair service.
Option #2: Attempt to boot into recovery using a JIG.
Option #3: Play dumb and return my phone under warranty.
Questions
Option #1: is there a kit you can buy to perform this JTAG repair yourself? I will be more careful in the future but I don't want to be helpless if this ever happens again.
Option #2: I find conflicting advice here. Will this help my phone? eBay sellers warn that a JIG will not help a phone boot into download mode if it doesn't even power on at all. Has anyone attempted this with a phone in the same condition as mine? if so, what was the outcome?
Option #3: The easy way out . But also the defeated unhonest route I would rather avoid. It seems that most people reporting a phone in this condition never explain how they fixed their phone. What do they do?
My phone is still under warranty. Will they be able to detect that I caused the malfunction if I tell a lie that this just happened one day after charging the phone over night?
What do people do when their warranty has expired?
Please let me know how you handled this?
I hope this at least helps someone prevent what I did. Take your time!
I look forward to any advice
Sent from my SGH-I747M using xda app-developers app
fullycompletely said:
I
This is I9300 forum if you do not have I9300 this is the wrong forum and any advice may not apply to your phone .
You say >>>>>
SGH-I747M
Option #1: Pay someone to perform a JTAG repair service.
That may work but it depends upon the actual problem .
Option #2: Attempt to boot into recovery using a JIG.
Dirt Cheapo always worth a try .
Option #3: Play dumb and return my phone under warranty.
It will be either rejected for warranty or repaired .
Questions
Option #1: is there a kit you can buy to perform this JTAG repair yourself?
YES use GOOGLE search .
I will be more careful in the future but I don't want to be helpless if this ever happens again.
But JTAG is no magic solution .
helpless is a simple fact of reading the faqs and guides after its broken .
Option #2: I find conflicting advice here. Will this help my phone? eBay sellers warn that a JIG will not help a phone boot into download mode if it doesn't even power on at all. Has anyone attempted this with a phone in the same condition as mine? if so, what was the outcome?
READ the JTag thread .
My phone is still under warranty. Will they be able to detect that I caused the malfunction if I tell a lie that this just happened one day after charging the phone over night?
What do people do when their warranty has expired?
Phone is not old enough for no warranty but warranty refused then you pay .
Click to expand...
Click to collapse
fullycompletely said:
I hard bricked my phone by rushing to install a new ROM before i had to leave for work. Later when I retraced my steps I realized that I made a stupid and critical mistake. I installed a ROM for a Galaxy S2 onto my Galaxy S3.
The installation appeared to be going smoothly. When it was complete I pressed the "reboot now" button. My phone turned off and never turned back on.
Now the phone has no signs of life. No Power, No Recovery, No download mode, No drivers when I plug it into a computer USB port. The computer does recognize that some kind of USB device is connected to it though. Which is what makes me believe that the phone is not dead and must be repairable.
I've done research and it appears that there are 3 options. (Please let me know if there are more)
Option #1: Pay someone to perform a JTAG repair service.
Option #2: Attempt to boot into recovery using a JIG.
Option #3: Play dumb and return my phone under warranty.
Questions
Option #1: is there a kit you can buy to perform this JTAG repair yourself? I will be more careful in the future but I don't want to be helpless if this ever happens again.
Option #2: I find conflicting advice here. Will this help my phone? eBay sellers warn that a JIG will not help a phone boot into download mode if it doesn't even power on at all. Has anyone attempted this with a phone in the same condition as mine? if so, what was the outcome?
Option #3: The easy way out . But also the defeated unhonest route I would rather avoid. It seems that most people reporting a phone in this condition never explain how they fixed their phone. What do they do?
My phone is still under warranty. Will they be able to detect that I caused the malfunction if I tell a lie that this just happened one day after charging the phone over night?
What do people do when their warranty has expired?
Please let me know how you handled this?
I hope this at least helps someone prevent what I did. Take your time!
I look forward to any advice
Sent from my SGH-I747M using xda app-developers app
Click to expand...
Click to collapse
try a USB Jig. only a few £ off ebay etc.