Related
I know its possible to send audio from an Android phone via bluetooth to a PC using the a2dp profile. But I want to do it the other way. Connect the phone to my amplifier and send audio via bluetooth a2dp from my laptop.
I've searched but not found. Anyone know it it's possible?
I think the standard BlueZ stack can't do this. I think the Broadcom BTLA stack might be able to do this ... IF you have the Broadcom Bluetooth chip inside.
Hi Pananza,
did you have success to use an android device as a2dp receiver? I'm looking for a solution but I didn't find anything useful.
The only solution that I have found is to use the NDK to access the BlueZ stack, but I'm not sure if this is the right way.
Thanks
Paulo
Using phone as A2DP receiver
Hello
I would like to do this too, have a Sony MW600, and it works perfect with laptop or my HTC Desire, but it can not be charged and used at the same time..
Will it be possible to do this on an Android that is not rooted?
Did anything ever come of this? I'm looking for an app that would allow android to receive bluetooth a2dp or whatever the basic format is (mono ok), and output audio on the headphone jack of the phone. Bass ackwards to what all other apps i've found are doing. I've always been a "special needs" user
chulew said:
Did anything ever come of this? I'm looking for an app that would allow android to receive bluetooth a2dp or whatever the basic format is (mono ok), and output audio on the headphone jack of the phone. Bass ackwards to what all other apps i've found are doing. I've always been a "special needs" user
Click to expand...
Click to collapse
any update on this?
Wanting to use Android OS in the dash of my vehicle hooked to the audio system and use bluetooth a2dp to connect to mobile phones to play media through the system.
I'm looking for a similar setup. Has anyone found a way to turn android into an a2dp receiver?
wy1d said:
I'm looking for a similar setup. Has anyone found a way to turn android into an a2dp receiver?
Click to expand...
Click to collapse
+1
You can transform your device into a wifi music receiver with the app called soundwire, you must install a server on your pc to stream audio from your pc to your android device. I didn't find anything with bluetooth.
Sent from my GT-N8010 using XDA Premium HD app
wy1d said:
I'm looking for a similar setup. Has anyone found a way to turn android into an a2dp receiver?
Click to expand...
Click to collapse
Same here. More and more people are going to have "last years" android phone lying around doing nothing and this would be an awesome way to re-purpose it.
Whether it uses BT, Wifi, I don't care as long as I can stream audio from one android phone to another. What I don't want is to deal with DLNA or manufacturer built in BS. Just need google to turn on the A2DP sink profile and be done with it. The hardware is all there, just need the software to take advantage.
The next best thing is one of those BT reciever dongles/boxes. They run about $20 I think. So PSA to android developers - if you can enable this in a paid app I'm ready to buy it and I'll bet a lot of others are as well.
http://stackoverflow.com/questions/15557933/receive-audio-via-bluetooth-in-android
snuk182 said:
http://stackoverflow.com/questions/15557933/receive-audio-via-bluetooth-in-android
Click to expand...
Click to collapse
Did that tutorial works for you?
I've tried, but it doesn't work. My Panasonic TV doesn't see my phone, so I cannot play the TV audio thru my phone.
Any ideas?
Thanks!
I was also looking for an app like this.
For my old phones, my android sticks, ... no progress I assume ?
Waiting the same here! My idea is to buy a bluetooth transmitter, connect it to my TV and receive the audio on my phone.
I can't think that is not possible! :crying::crying:
Truck Tablet Install
Hey Everyone,
Been very curious about this as well as I'm going to do a nexus 7 install in my truck and want to be able to bluetooth additional music aside from what is on the tablet through the tablet to my speakers. Kind of a necessity due to the lack of a 3.5mm aux into the stereo. Hopefully we can figure this out!
n00b
?
I'm also looking to do this.
I'd like to be able to connect a Bluetooth transmitter to the output of a mixing desk, and then just use my phone to receive the audio (which I'd then want to save with something like tapeatalk).
This could provide a very quick method of recording gigs or DJ sets in stereo, and would be better quality than simply using the built in mic of your phone.
a2dp sink.
Bluetooth File transfer app can stream music from another phone. And this is where tha first phone works as a a2dp sink am I right? Can't we use that to built an app to follow it but using pc/laptop as the source?
Seems, that no one is interested. What a pitty, it could be really HOT stuff. For example, cheap android phone pluged instantly to a charger and to Car Audio via AUX, and You have got Bluetooth automatic pairing system for calling and music, navi etc.
Unfortunately I couldn't find solution for this, neither the app. It is strange. Some people says, that Android can not be a sink (reciever) in a2dp profile. So how does microphones from earphones are streaming audio to a phone, hmm?
Maybe someone will do it
I have a LG G3 and it does it flawlessly. It have a function called "Turn Audio Channel mode" on bluetooth settings.
I'm wondering how to do the same thing on any other andoird phones.
I have a Jabra Clipper audio player to play my MP3's & streaming internet radio to my car stereo via 3.5mm jack. I also have my Moto BT headset that I use.
When I get a call the music is interrupted and I can answer the call with the Jabra Clipper and I can hear the call audio through the car speakers. The problem is my microphone on my phone is too far away on my car dock and people can't hear me.
So after answering the call I would have to go to settings, wireless, bluetooth and disconnect the Jabra and connect my Moto headset before I can take the call.
This is a pain and takes too long, is there a widget to swap paired BT devices? I cannot find anything in the marketplace.
Maybe a Tasker profile? I have Tasker but I haven't gotten any profiles to work yet.
I have a Droid X running Liberty 1.5.
Thanks.
I don't know if this will help, but can you not have both items paired and connected at the same time? My car has bluetooth for my phone for talk only, and I just added a Tunelink device to stream my music by bluetooth in the car. I've noticed when I get in the car that both will be paired, but only the car will be connected. So I have added a bluetooth widget to my homescreen, when I get in the car I will click on the widget that opens up the bluetooth settings and click on the Tunelink to connect it, from then on out both items are connected AND paired and both will work with no problems.
I initially had the HTC settings > Bluetooth shortcut, but then when Widgetsoid added the capability to choose bluetooth settings I changed to that.
http://www.appbrain.com/app/widgetsoid2-x/com.jim2
Nice! I have a Jabra Clipper too! I say that because I have not seen anyone else with one yet lol.
Ever since I switched to CM7 I have been able to 1-touch enable/disable Bluetooth and Wifi among 10 other optional, additional buttons via the status bar. I hope this bar never goes away in future updates! Anywho you could check that out for managing your bluetooth connection quickly and efficiently.
All I can say in addition to that is clicking on individual bluetooth devices in the menu allows you to disable specifically phone / media audio. You could try disabling one or the other for one of your devices so that they both work independently. I'm not really sure how else to help you because of the unique situation.
Your best bet is to make your setup less complicated, by not using one or the other device, but I saved that one for last because it isn't what you're looking to accomplish.
PetRiLJoe said:
Nice! I have a Jabra Clipper too! I say that because I have not seen anyone else with one yet lol.
Ever since I switched to CM7 I have been able to 1-touch enable/disable Bluetooth and Wifi among 10 other optional, additional buttons via the status bar. I hope this bar never goes away in future updates! Anywho you could check that out for managing your bluetooth connection quickly and efficiently.
All I can say in addition to that is clicking on individual bluetooth devices in the menu allows you to disable specifically phone / media audio. You could try disabling one or the other for one of your devices so that they both work independently. I'm not really sure how else to help you because of the unique situation.
Your best bet is to make your setup less complicated, by not using one or the other device, but I saved that one for last because it isn't what you're looking to accomplish.
Click to expand...
Click to collapse
Thanks for your reply, what is CM7?
scramer said:
I don't know if this will help, but can you not have both items paired and connected at the same time? My car has bluetooth for my phone for talk only, and I just added a Tunelink device to stream my music by bluetooth in the car. I've noticed when I get in the car that both will be paired, but only the car will be connected. So I have added a bluetooth widget to my homescreen, when I get in the car I will click on the widget that opens up the bluetooth settings and click on the Tunelink to connect it, from then on out both items are connected AND paired and both will work with no problems.
I initially had the HTC settings > Bluetooth shortcut, but then when Widgetsoid added the capability to choose bluetooth settings I changed to that.
http://www.appbrain.com/app/widgetsoid2-x/com.jim2
Click to expand...
Click to collapse
I use Widgetsoid but I haven't tried 2, I set up a shortcut to BT settings on my widget so far. I'll try the new version and see if it works out. Thanks.
ryant35 said:
I use Widgetsoid but I haven't tried 2, I set up a shortcut to BT settings on my widget so far. I'll try the new version and see if it works out. Thanks.
Click to expand...
Click to collapse
Here is the link: http://www.appbrain.com/app/widgetsoid2-x/com.jim2
Prior to the upgrade last week, the widget would only turn bluetooth on or off. With the update last week it added the option to have it open up the bluetooth (or wifi) options. This isn't automatic, you have to choose for it to do this in the options.
I don't know maybe the phone won't automatically connect with two items at once. It's a hassle to connect each time, but after the initial connection everything runs smoothly.
I downloaded Widetoid 2 and loaded it, now I have an BT settings icon on my switcher.
I managed to figure it out without he use of a widget, under my bluetooth settings I selected my Jabra Clipper and unchecked phone audio. Now I can connect my Clipper as media audio and my BT headset at phone audio at the same time. Now when I get a call the audio switches from the Clipper to the BT headset.
Thanks for your help.
An amazing One click - Connect 2 Specific Bluetooth device for A2DP and Phone app:
Bluetooth Pair
https://play.google.com/store/apps/details?id=com.gnssoftworks.bluetoothpair
found it very useful for swapping bluetooth headphones between devices WITHOUT turning off Bluetooth entirely or going into the settings menu.
Example Use Case:
I have one Stereo Bluetooth headset with mic (two profiles - phone and A2DP audio)
I have one Android Phone and one Android Tablet.
Phone Profile is always connected to the Android Phone, but the A2DP audio changes depending on which device you want to listen to music from.
Normally, if you want to listen to audio from the Tablet when your headset's A2DP profile is connected to the phone, you'd have to first go to the settings menu of the phone, and disconnect the A2DP, leaving Phone Profile connected. Then go to the settings menu on your tablet and connect the A2DP only.
Then you'd have to do the opposite if you want to listen to audio from the Phone again.
Takes a long time.
With Bluetooth Pair, you can specifically connect or disconnect to a specific device and specific profile (phone / a2dp) by widgets.
So you won't have to turn off the bluetooth completely on one device just to allow your headset to connect another device. Nor do you need to go into settings anymore.
1.) Just tap on the A2DP device specific widget on the phone to disconnect, the A2DP Profile from the phone
2.) go to the Tablet, and tap on the A2DP device specific widget to connect the A2DP profile of the headset to the Tablet
Two taps!
You saved me From buying a new stereo!
klau1 said:
An amazing One click - Connect 2 Specific Bluetooth device for A2DP and Phone app:
Bluetooth Pair
found it very useful for swapping bluetooth headphones between devices WITHOUT turning off Bluetooth entirely or going into the settings menu.
Example Use Case:
I have one Stereo Bluetooth headset with mic (two profiles - phone and A2DP audio)
I have one Android Phone and one Android Tablet.
Phone Profile is always connected to the Android Phone, but the A2DP audio changes depending on which device you want to listen to music from.
Normally, if you want to listen to audio from the Tablet when your headset's A2DP profile is connected to the phone, you'd have to first go to the settings menu of the phone, and disconnect the A2DP, leaving Phone Profile connected. Then go to the settings menu on your tablet and connect the A2DP only.
Then you'd have to do the opposite if you want to listen to audio from the Phone again.
Takes a long time.
With Bluetooth Pair, you can specifically connect or disconnect to a specific device and specific profile (phone / a2dp) by widgets.
So you won't have to turn off the bluetooth completely on one device just to allow your headset to connect another device. Nor do you need to go into settings anymore.
1.) Just tap on the A2DP device specific widget on the phone to disconnect, the A2DP Profile from the phone
2.) go to the Tablet, and tap on the A2DP device specific widget to connect the A2DP profile of the headset to the Tablet
Two taps!
Click to expand...
Click to collapse
Thanks a ton! This $1.50 app saved me from having to purchase a new stereo!
Just to let you know, this solved the exact problem I was having, over five years later! Thanks!
ryant35 said:
I downloaded Widetoid 2 and loaded it, now I have an BT settings icon on my switcher.
I managed to figure it out without he use of a widget, under my bluetooth settings I selected my Jabra Clipper and unchecked phone audio. Now I can connect my Clipper as media audio and my BT headset at phone audio at the same time. Now when I get a call the audio switches from the Clipper to the BT headset.
Thanks for your help.
Click to expand...
Click to collapse
Headphone Connect - One Click Audio is a really simple app that let's you connect / disconnect to your desired bluetooth headset.
You find it in the play store if you search for "Headphone connect - one click audio"
I realize this is an old post, but I recently released an app called ShortTooth: create customized single-click shortcuts to connect to any paired Bluetooth device.
I use it to disconnect from my home stereo when I get into the car (parked close enough to still be paired), and reconnect to my home stereo when I get back.
You could use it to create two shortcuts:
* Toggle Jabra
* Toggle Moto
Or you can create two rows:
* Connect Jabra | Discconnect Jabra
* Connect Moto | Discconnect Moto
It has a free 14-day trial.
Hi All,
I have an NFC enabled Samsung Galaxy Nexus and have placed NFC tags in specific places (car, living room, home theater, bedroom, etc.) so that I when I set my phone on the NFC tag I can automatically play music over Bluetooth in that location.
I am trying to completely automate connecting to a *specific* Bluetooth device. (I am not looking to simply toggle Bluetooth on or off, or select the desired Bluetooth device from a menu.) I am currently using "NFC Task Launcher" to accomplish the majority of this, but as far as Bluetooth is concerned, the most I've been able to automate so far is to simply Bluetooth on or off. (I also tried "Tasker" but the functionality I am looking for is missing from this app as well.) I have not found a way to read an NFC tag and automatically connect to a specific Bluetooth device based on which tag is read, nor have I even found a "one click" app / widget that connects to a specific Bluetooth device. (If such a "one click" app / widget exists, I could automate the launching of that app to make the connection.).
(Also having the Bluetooth device in each location initiate the connection isn't a viable solution, I need for the phone to iniatiate the connection.)
Does anyone have any suggestions? Thanks in advance!
Ran across this looking for the same answer. Surprised no one has responded in over a month here.
Did you have any luck finding a workaround for specific BT device connections?
Hi,
I am the developer of MacroDroid an automation application for Android (that supports NFC tags).
This is a feature one of my users has just requested, so I'm just starting to look into the feasibility of adding it. (I came across this post during my initial research).
I will report back here on what I find and if all goes to plan I'll get the feature added to MacroDroid ASAP.
In the meantime, I'd appreciate ALL feedback (positive and negative) with regards to MacroDroid as I hope to make it as powerful and flexible as possible. It's available on Google Play here:
https://play.google.com/store/apps/details?id=com.arlosoft.macrodroid&hl=en
Cheers,
Jamie
Just a quick follow up to my last post.
I believe it is possible to implement functionality to connect to a specific device. I currently don't have an appropriate device to test this, but I have one on order. As soon as I receive it, I'll have a go at adding this to MacroDroid.
In the meantime the following app on the market:
https://play.google.com/store/apps/details?id=a2dp.Vol&hl=en
Has the capability to connect to a second Bluetooth device when a Bluetooth connection is established. This may or may not help depending on what you are doing.
Any update on this? I'm also in the same boat. My car doesn't automatically connect anymore, never really did, I think its Bluetooth > 3.x on phone( 4.0 right now, but same on older past devices on S3 ) and the stereo bluetooth is older version( can't remember exactly. )
Anyways, thanks dev for posting about the other app, plan on trying it out tomorrow. In the meantime have you made any progress on your app for this functionality? I'd rather keep everything( all settings ) in one app if I can. Don't think Tasker allows this still, not sure on locale but I doubt it also.
Eagerly awaiting an update
A few more options
Did a little more searching just in case anything new has been released recently - came up with a few new options.. None seem to suit my need (trigger connection within Tasker via a plugin or directly opening an app), but posting here since they may help others.. I haven't tried these - just going on app descriptions.
So, in addition to A2DP Volume as suggested by UndeadCretin, which would be the best option if you want the connection to a A2DP device when another BT device connects, there's also Car Music Connector (https://play.google.com/store/apps/details?id=com.cleansoft.carmusic) which would seem to fit the bill for most people perfectly. Free, and "Connects you device to Bluetooth stereo in one widget click or NFC tap." Downside would seem to be that it would need to be set as default NFC app for one tap NFC triggering.
If just a widget is needed, Bluetooth Autoconnect (https://play.google.com/store/apps/details?id=com.btautoconnect), which is a paid app - although Car Music Connector also has a widget so is probably a better (and free!) choice.
Edit: Scratch that.. Car Music Connector doesn't prompt for a device to connect to.. I only have 1 A2DP device paired, and it wont connect to it (just times out) - maybe someone else will have better luck.
Bluetooth Autoconnect seems like it should work, however it enables/disables bluetooth at the same time - so if you already have bluetooth turned on, it turns it off. <sigh>
I'm unable to get it to connect to the either of 2 A2DP devices though - emailed the Dev hoping that it's just something funky with my device (Galaxy S3) that can be worked around.
Interested in this as well.
Firstly sorry for the long delay in replying!
I have now added the ability in MacroDroid to connect to a specific Bluetooth audio device. I have it working on my 2.3 and 4.0.4 and 4.1 devices but I only have a single audio device to test against. Some users have reported that it's not working for them, so if anyone does try this I would appreciate any feedback if it works or doesn't. If it's not working for you could you please tell me the device, OS version and device you are trying to connect to. Feedback here is fine, or mail me at: [email protected]
Best Regards,
Jamie
UndeadCretin said:
I have now added the ability in MacroDroid to connect to a specific Bluetooth audio device.
Click to expand...
Click to collapse
Awesome to hear.. I'll give it a test run when I get a chance and get back to you with results.. Just a query - what's the system resource usage of MacroDroid? I currently use Tasker, and am more than happy to buy and use MacroDroid for this one single function if it works, but don't really want them both running in the background at the same time if they're using up resources.. Can MacroDroid be setup to only run when called (i.e. having a shortcut trigger it, or even better via a Locale plugin?) I know that this is probably wanting a little too much
For others, Bluetooth Auto Connect (https://play.google.com/store/apps/details?id=org.myklos.btautoconnect) has had a recent update of "New: Tasker/Local plugin - new Profile action added - Connect / Disconnect actions supported" which sounds promising.
I never got the app to work previously (it just never connected), but others may have better luck. I haven't tried it since the update.
Kaibosh said:
Awesome to hear.. I'll give it a test run when I get a chance and get back to you with results.. Just a query - what's the system resource usage of MacroDroid? I currently use Tasker, and am more than happy to buy and use MacroDroid for this one single function if it works, but don't really want them both running in the background at the same time if they're using up resources.. Can MacroDroid be setup to only run when called (i.e. having a shortcut trigger it, or even better via a Locale plugin?) I know that this is probably wanting a little too much
For others, Bluetooth Auto Connect (https://play.google.com/store/apps/details?id=org.myklos.btautoconnect) has had a recent update of "New: Tasker/Local plugin - new Profile action added - Connect / Disconnect actions supported" which sounds promising.
I never got the app to work previously (it just never connected), but others may have better luck. I haven't tried it since the update.
Click to expand...
Click to collapse
The resource usage of MacroDroid should be very low as it is effectively dormant in most cases. MacroDroid does run as a foreground service so it displays a persistent icon in the notification bar. If this annoys you there is an option in settings to turn off the foreground service. In most cases it will still work but YMMV. Anyway you can get the basic functionality for free, so you can give it a try and see how it works for you.
Regards,
Jamie
I have just submitted an updated (V1.3.8) that will hopefully solve the issue some users were seeing with the Bluetooth audio connection. I appreciate any feedback if it works (or not) for you....
Car Music Connector
Hello,
In addition to A2DP profile Car Music Connector waits for Headset profile to be connected by default. This is more reliable for most car bluetooth enabled stereos. If you are using it with A2DP only device you need to disable "Wait for Headset Bluetooth connection" in settings.
Hope that helps.
Alexander Shakhov.
Car Music Connector author.
An amazing One click - Connect 2 Specific Bluetooth device for A2DP and Phone app:
Bluetooth Pair
https://play.google.com/store/apps/details?id=com.gnssoftworks.bluetoothpair
found it very useful for swapping bluetooth headphones between devices WITHOUT turning off Bluetooth entirely or going into the settings menu.
Example Use Case:
I have one Stereo Bluetooth headset with mic (two profiles - phone and A2DP audio)
I have one Android Phone and one Android Tablet.
Phone Profile is always connected to the Android Phone, but the A2DP audio changes depending on which device you want to listen to music from.
Normally, if you want to listen to audio from the Tablet when your headset's A2DP profile is connected to the phone, you'd have to first go to the settings menu of the phone, and disconnect the A2DP, leaving Phone Profile connected. Then go to the settings menu on your tablet and connect the A2DP only.
Then you'd have to do the opposite if you want to listen to audio from the Phone again.
Takes a long time.
With Bluetooth Pair, you can specifically connect or disconnect to a specific device and specific profile (phone / a2dp) by widgets.
So you won't have to turn off the bluetooth completely on one device just to allow your headset to connect another device. Nor do you need to go into settings anymore.
1.) Just tap on the A2DP device specific widget on the phone to disconnect, the A2DP Profile from the phone
2.) go to the Tablet, and tap on the A2DP device specific widget to connect the A2DP profile of the headset to the Tablet
Two taps!
klau1 said:
An amazing One click - Connect 2 Specific Bluetooth device for A2DP and Phone app:
Bluetooth Pair
https://play.google.com/store/apps/details?id=com.gnssoftworks.bluetoothpair
found it very useful for swapping bluetooth headphones between devices WITHOUT turning off Bluetooth entirely or going into the settings menu.
Example Use Case:
I have one Stereo Bluetooth headset with mic (two profiles - phone and A2DP audio)
I have one Android Phone and one Android Tablet.
Phone Profile is always connected to the Android Phone, but the A2DP audio changes depending on which device you want to listen to music from.
Normally, if you want to listen to audio from the Tablet when your headset's A2DP profile is connected to the phone, you'd have to first go to the settings menu of the phone, and disconnect the A2DP, leaving Phone Profile connected. Then go to the settings menu on your tablet and connect the A2DP only.
Then you'd have to do the opposite if you want to listen to audio from the Phone again.
Takes a long time.
With Bluetooth Pair, you can specifically connect or disconnect to a specific device and specific profile (phone / a2dp) by widgets.
So you won't have to turn off the bluetooth completely on one device just to allow your headset to connect another device. Nor do you need to go into settings anymore.
1.) Just tap on the A2DP device specific widget on the phone to disconnect, the A2DP Profile from the phone
2.) go to the Tablet, and tap on the A2DP device specific widget to connect the A2DP profile of the headset to the Tablet
Two taps!
Click to expand...
Click to collapse
Awesome! Gonna download it now and try it in the morning... but ya still get the thanks regardless of how it works for breathing life into this thread
I'm guessing the answer to my question is likely to setup a Tasker profile, but I thought I'd ask anyway. Does anyone know of a way to get Bluetooth on my OG to autoconnect to a device it's already paired to?
For example, when I get in my car and want to connect to my stereo, I turn on Bluetooth, then have to go to my paired devices and manually connect to the stereo. I'd much rather just turn on Bluetooth and have the phone autoconnect to the stereo.
I'll likely soon set up an NFC tag for my car, so I should be able to turn on Bluetooth and connect to the stereo with that, but wanted to know if there was another solution in the meantime.
Any ideas?
Digil said:
I'm guessing the answer to my question is likely to setup a Tasker profile, but I thought I'd ask anyway. Does anyone know of a way to get Bluetooth on my OG to autoconnect to a device it's already paired to?
For example, when I get in my car and want to connect to my stereo, I turn on Bluetooth, then have to go to my paired devices and manually connect to the stereo. I'd much rather just turn on Bluetooth and have the phone autoconnect to the stereo.
I'll likely soon set up an NFC tag for my car, so I should be able to turn on Bluetooth and connect to the stereo with that, but wanted to know if there was another solution in the meantime.
Any ideas?
Click to expand...
Click to collapse
As long as I turn on Bluetooth before I start my car, mine auto-connects to my Hyundai Sonata just fine...
Sent from my LG-E970 using xda app-developers app
My phone auto connects to my car too. Even if I forget to turn it on before I start my car and toggle it on after the car has already started, they will find each other and auto connect. They do not connect instantly though (maybe the BT scan interval is a little bit longer). Maybe you just have to wait a bit?
I have Llama installed and have a profile setup so that when it disconnects from a known Wifi (leave home/work/etc.), the phone will turn on BT automatically and try to connect to the car. Another profile is set up so that once the BT does connect to the car, it will turn off Wifi on the phone and also turn up volume and vibrate "on".
Hmmm, thanks for the replies. I'm wondering if my issue is that I've only turned Bluetooth on after the car was running, not before. If anything, I'll just set up a Llama or Tasker profile. Thanks again!
Digil said:
Hmmm, thanks for the replies. I'm wondering if my issue is that I've only turned Bluetooth on after the car was running, not before. If anything, I'll just set up a Llama or Tasker profile. Thanks again!
Click to expand...
Click to collapse
Yeah, if I turn on bt after I start the car then it won't auto-connect.
Sent from my LG-E970 using xda app-developers app
Just a heads up to anyone interested. Tasker doesn't have an action to autoconnect to paired Bluetooth devices. However, there is an app available in the Play Store solely for this functionality:
https://play.google.com/store/apps/...sMSwyLDEsIm9yZy5teWtsb3MuYnRhdXRvY29ubmVjdCJd
This app is also a Tasker plugin, so you can use it in conjunction with any Tasker profile. Good stuff.
Digil said:
I'm guessing the answer to my question is likely to setup a Tasker profile, but I thought I'd ask anyway. Does anyone know of a way to get Bluetooth on my OG to autoconnect to a device it's already paired to?
For example, when I get in my car and want to connect to my stereo, I turn on Bluetooth, then have to go to my paired devices and manually connect to the stereo. I'd much rather just turn on Bluetooth and have the phone autoconnect to the stereo.
I'll likely soon set up an NFC tag for my car, so I should be able to turn on Bluetooth and connect to the stereo with that, but wanted to know if there was another solution in the meantime.
Any ideas?
Click to expand...
Click to collapse
I have a very similar issue. I have two bluetooth devices in my car. My handsfree system and a stereo adapter. The phone autoconnects to the handsfree system but I have to manually click on the stereo adapter every time to get it to connect. No ordering of on/off etc seems to alleviate this. Any ideas?
themoe said:
I have a very similar issue. I have two bluetooth devices in my car. My handsfree system and a stereo adapter. The phone autoconnects to the handsfree system but I have to manually click on the stereo adapter every time to get it to connect. No ordering of on/off etc seems to alleviate this. Any ideas?
Click to expand...
Click to collapse
The app I mention above has an option to autoconnect to all paired devices. This might be what you're looking for.
Digil said:
The app I mention above has an option to autoconnect to all paired devices. This might be what you're looking for.
Click to expand...
Click to collapse
Yea, already gave that a shot. Tried just the app, then tried a tasker profile that would try to connect to the A2DP device if the handsfree device was connected too. Neither worked. Gonna try another couple apps to see where it gets me; if not I'll just live with having to always click it in the settings menu until an AOSP rom comes along that I would be willing to run (not quite annoyed enough at the LG software to give up an SD card/8gigs and hardware keys)
themoe said:
Yea, already gave that a shot. Tried just the app, then tried a tasker profile that would try to connect to the A2DP device if the handsfree device was connected too. Neither worked. Gonna try another couple apps to see where it gets me; if not I'll just live with having to always click it in the settings menu until an AOSP rom comes along that I would be willing to run (not quite annoyed enough at the LG software to give up an SD card/8gigs and hardware keys)
Click to expand...
Click to collapse
Try this app. Have been using it for a long time now. I have the same problem as you. You can set it up to automatically connect to a second device ( your music adapter), right after it connects to the first one ( your car). There are also more useful settings there.
https://play.google.com/store/apps/...nav_result#?t=W251bGwsMSwxLDMsImEyZHAuVm9sIl0.
Hi guys, I wonder if I could get an answer to something that I can't seem to figure out.
I currently have an HTC One M8, which when I get into my car, automatically pairs to the car's Bluetooth system & allows me to use voice control to dial, and also play music through the car stereo (also via Bluetooth).
What I can't figure out, is if I were to buy a smartwatch (The LG is what i'm looking at), then I assume that the watch connects to the phone using Bluetooth? If that is the case, then what happens, if my phone & watch are currently paired together when I get into my car?
I'm under the impression that Bluetooth only was between 2 devices? If so, would I need to manually disconnect the phone from the watch and then manually connect it to the car? Or would the phone automatically drop the watch connection when it saw the in-car connection available? Or can the phone somehow remain connected to both Bluetooth devices at the same time?
I can't be the only person that might have in-car Bluetooth that's also thinking about/already owns a smartwatch?
Maybe I'm just over-thinking it?
Thanks in advance for any information.
greatcapp said:
Hi guys, I wonder if I could get an answer to something that I can't seem to figure out.
I currently have an HTC One M8, which when I get into my car, automatically pairs to the car's Bluetooth system & allows me to use voice control to dial, and also play music through the car stereo (also via Bluetooth).
What I can't figure out, is if I were to buy a smartwatch (The LG is what i'm looking at), then I assume that the watch connects to the phone using Bluetooth? If that is the case, then what happens, if my phone & watch are currently paired together when I get into my car?
I'm under the impression that Bluetooth only was between 2 devices? If so, would I need to manually disconnect the phone from the watch and then manually connect it to the car? Or would the phone automatically drop the watch connection when it saw the in-car connection available? Or can the phone somehow remain connected to both Bluetooth devices at the same time?
I can't be the only person that might have in-car Bluetooth that's also thinking about/already owns a smartwatch?
Maybe I'm just over-thinking it?
Thanks in advance for any information.
Click to expand...
Click to collapse
I have the Omate Truesmart. I keep it paired to my Note3, and also use LG Tone bt headphones or with my car radio JVC Kameleon. The difference is when you click on the settings icon for the connected device in the BT menu on the phone. It will list the headphones/car radio as phone and media audio and allows me to play music through them or use as bluetooth connection for calls, and skip tracks and play pause. For the watch it lists the connection type as internet use, and I can use the watch to view and skip tracks, view/answer/dismiss calls, reply to notifications. I am guessing the android wear devices will probably work the same way.
ghostfaceg35 said:
I have the Omate Truesmart. I keep it paired to my Note3, and also use LG Tone bt headphones or with my car radio JVC Kameleon. The difference is when you click on the settings icon for the connected device in the BT menu on the phone. It will list the headphones/car radio as phone and media audio and allows me to play music through them or use as bluetooth connection for calls, and skip tracks and play pause. For the watch it lists the connection type as internet use, and I can use the watch to view and skip tracks, view/answer/dismiss calls, reply to notifications. I am guessing the android wear devices will probably work the same way.
Click to expand...
Click to collapse
Many thanks for the reply.
So, for all intents & purposes, I can, in real terms, keep the phone connected to both the watch & the in-car audio at the same time?
yep2345
greatcapp said:
Many thanks for the reply.
So, for all intents & purposes, I can, in real terms, keep the phone connected to both the watch & the in-car audio at the same time?
Click to expand...
Click to collapse
Yes, you can
animefans said:
Yes, you can
Click to expand...
Click to collapse
Thanks very much for your responses guys. I ended up ordering the Samsung instead of the LG in the end (Which is odd, as I dislike their phones).
I have a Galaxy Gear and keep it connected to my phone all the time as well as my LG Tone+ , I haven't experienced any issues with the two. I'm assuming that the Android Wear stuff will work similarly if not better.
Good question
Enviado desde mi GT-S5570I usando Tapatalk 2