best/easiest way to flash honeycomb? - HTC Flyer, EVO View 4G

please excuse my ingorance, i currently have S-off, and ran the roo zip file. tried to flash the honeyfly rom and im stuck on the white HTC screen when it tries to boot. is there a honeycomb rom i can just flash from clockwork recovery?
thanks

thatg said:
please excuse my ingorance, i currently have S-off, and ran the roo zip file. tried to flash the honeyfly rom and im stuck on the white HTC screen when it tries to boot. is there a honeycomb rom i can just flash from clockwork recovery?
thanks
Click to expand...
Click to collapse
There really is no "easy" way. Follow these steps, then flash the HC ROM zip file you want. I followed the steps in the link, then flashed the HC ROM zip I wanted without booting up the stock one first. Your Flyer will be S-ON, but bootloader will be unlocked, FYI.

Related

Why can't I flash ROMs?

For some reason I can only run stock rooted on my Rezound. I've tried both Clockwork and Amon Ra with no success. I know how to flash ROMs, this is my 6th or 7th Android phone and my 3rd HTC Android phone.
I just relocked my bootloader and flash the stock RUU to restart from scratch and start over. Still, I can't flash ROMs. I put my ROM on the sd card, boot into recovery and wipe data/cache. Then I go into the boot loader and flash the kernel. Then, I just get stuck at the HTC screen forever. It's extremely frustrating considering I'm coming from the Galaxy Nexus where I was running an ICS ROM (not the stock one) and I thought the Rezound looked cool so I picked it up. But now I'm stuck on GB.
Am I doing something wrong or missing something? When I first unlocked the phone Saturday I tried to flash an ICS ROM but got stuck at the HTC screen. Then I flashed a different one successfully but it was buggy so I flashed a GB ROM and played with that for a little bit. After that I got stuck and couldn't flash anything without getting stuck at HTC, so I flashed a stock, rooted ROM and from then on that's all I've been able to use.
Edit: So I just tried manually flash the boot.img from the PH98IMG folder by doing fastboot flash boot boot.img and it successfully flashed yet I'm STILL stuck at the HTC screen.... The method ONLY works for the stock ROM for me.
skatingrocker17 said:
For some reason I can only run stock rooted on my Rezound. I've tried both Clockwork and Amon Ra with no success. I know how to flash ROMs, this is my 6th or 7th Android phone and my 3rd HTC Android phone.
I just relocked my bootloader and flash the stock RUU to restart from scratch and start over. Still, I can't flash ROMs. I put my ROM on the sd card, boot into recovery and wipe data/cache. Then I go into the boot loader and flash the kernel. Then, I just get stuck at the HTC screen forever. It's extremely frustrating considering I'm coming from the Galaxy Nexus where I was running an ICS ROM (not the stock one) and I thought the Rezound looked cool so I picked it up. But now I'm stuck on GB.
Am I doing something wrong or missing something? When I first unlocked the phone Saturday I tried to flash an ICS ROM but got stuck at the HTC screen. Then I flashed a different one successfully but it was buggy so I flashed a GB ROM and played with that for a little bit. After that I got stuck and couldn't flash anything without getting stuck at HTC, so I flashed a stock, rooted ROM and from then on that's all I've been able to use.
Edit: So I just tried manually flash the boot.img from the PH98IMG folder by doing fastboot flash boot boot.img and it successfully flashed yet I'm STILL stuck at the HTC screen.... The method ONLY works for the stock ROM for me.
Click to expand...
Click to collapse
What kernel's are you flashing and what roms ? I know I have ran into trouble with the anthrax kernel with having to flash a stock GB kernel first . It seems for me at least going from GB to ICS or vice versus I have the best luck using stock kernels first. Once, the rom is loaded it has been easy to switch to custom kernels.
So maybe make sure for the GB roms your flashing the stock , unsecured kernel and for ICS the " leaked kernel " that everyone is using for a base.
mjh68 said:
What kernel's are you flashing and what roms ? I know I have ran into trouble with the anthrax kernel with having to flash a stock GB kernel first . It seems for me at least going from GB to ICS or vice versus I have the best luck using stock kernels first. Once, the rom is loaded it has been easy to switch to custom kernels.
So maybe make sure for the GB roms your flashing the stock , unsecured kernel and for ICS the " leaked kernel " that everyone is using for a base.
Click to expand...
Click to collapse
I'm just flashing whatever kernel comes with the ROM. By that I mean the PH98IMG file that contains the boot.img. Or should I be actually flashing a kernel in recovery?
skatingrocker17 said:
I'm just flashing whatever kernel comes with the ROM. By that I mean the PH98IMG file that contains the boot.img. Or should I be actually flashing a kernel in recovery?
Click to expand...
Click to collapse
So your taking the boot.img out and flashing it in fastboot ? that should be fine . Otherwise , put the PH98IMG on the root of the SD card and flash the rom in recovery then reboot to the bootloader (Amon Ra) and let the PH98IMG flash the kernel then reboot phone.
Try one of the ICS ROM's that have the kernel built into the install and follow the instructions which is basically flash ROM in recovery, let it boot to bootloader, press power, vol up when asked etc.
If they offer a separate ph*.zip then it is not automatic
NilsP said:
Try one of the ICS ROM's that have the kernel built into the install and follow the instructions which is basically flash ROM in recovery, let it boot to bootloader, press power, vol up when asked etc.
If they offer a separate ph*.zip then it is not automatic
Click to expand...
Click to collapse
So I have been doing it right. I've done that many times and it hasn't worked. I'm messing around with other kernels now, I just flashed this kernel on my stock ROM and it's working, so maybe I can flash an ICS kernel on an ICS rom and everything will work. We'll see.
I installed CleanRom and the kernel it came with and it does one thing differently......... it boots to the HTC screen then after about 10 seconds it reboots back to recovery. This is driving me nuts, I can't flash ANY rom. CleanRom has never worked for me but I did manage to flash a few roms RIGHT after getting the phone on Friday.
I've only been able to successfully install BAMF Rezound Cubed 1.0.2 which is a GB ROM. I've tried to installed Ineffabilis v1.3 which is also a GB ROM but it remains stuck at the HTC screen.
I believe the only other ROM I've been able to flash successfully is Ineffabilis-Deus-v1.0.2-Odex-ICS 4.0.3 sense 3.6, which IS an ICS ROM.
skatingrocker17 said:
I installed CleanRom and the kernel it came with and it does one thing differently......... it boots to the HTC screen then after about 10 seconds it reboots back to recovery. This is driving me nuts, I can't flash ANY rom. CleanRom has never worked for me but I did manage to flash a few roms RIGHT after getting the phone on Friday.
I've only been able to successfully install BAMF Rezound Cubed 1.0.2 which is a GB ROM. I've tried to installed Ineffabilis v1.3 which is also a GB ROM but it remains stuck at the HTC screen.
I believe the only other ROM I've been able to flash successfully is Ineffabilis-Deus-v1.0.2-Odex-ICS 4.0.3 sense 3.6, which IS an ICS ROM.
Click to expand...
Click to collapse
I think BAMF Cubed changes/upgrades your mainver. You should get a "mainver is older" error when flashing the ph98. IMG. Is it possible that you got the error but didn't see it-looking away at the time? If so, the easiest way around the mainver issue -imo- is scott's cleanflash tool.
There are many threads about mainver issues. It may be worth checking.
Edit- I re-read the thread, I may be wrong, dunno.
CleanRom will reboot to fastboot after flashing, press power and wait a second or two to install the kernel. This won't work if you DO have the newer mainver.
Hope this was helpful.
Sent from my ADR6425LVW using xda premium
skatingrocker17 said:
I installed CleanRom and the kernel it came with and it does one thing differently......... it boots to the HTC screen then after about 10 seconds it reboots back to recovery. This is driving me nuts, I can't flash ANY rom. CleanRom has never worked for me but I did manage to flash a few roms RIGHT after getting the phone on Friday.
I've only been able to successfully install BAMF Rezound Cubed 1.0.2 which is a GB ROM. I've tried to installed Ineffabilis v1.3 which is also a GB ROM but it remains stuck at the HTC screen.
I believe the only other ROM I've been able to flash successfully is Ineffabilis-Deus-v1.0.2-Odex-ICS 4.0.3 sense 3.6, which IS an ICS ROM.
Click to expand...
Click to collapse
As far as Ineffabilis GB, I haven't updated to v1.3 but I can tell you for v1.0 it stays on the white HTC screen for quite a while before booting up. Maybe you didn't wait long enough?
feralicious said:
As far as Ineffabilis GB, I haven't updated to v1.3 but I can tell you for v1.0 it stays on the white HTC screen for quite a while before booting up. Maybe you didn't wait long enough?
Click to expand...
Click to collapse
So does CleanROM. First boot is a lesson in patience.
I put my ROM on the sd card, boot into recovery and wipe data/cache. Then I go into the boot loader and flash the kernel. Then, I just get stuck at the HTC screen forever.
Click to expand...
Click to collapse
It sounds like you're missing the part where you, you know, actually flash the ROM. The kernel zip and the ROM zip are separate; the kernel (normally found in PH98IMG.zip) is flashed in hboot/fastboot, the ROM (where the zip is called whatever) from recovery. It doesn't matter which order you flash them, but if you flash an ICS kernel and you try to boot before flashing the ICS ROM, for example, you'll get stuck on that white HTC screen when trying to boot.
Many ROMs have a script built in that when you flash the ROM in recovery it will create a PH98IMG.zip and automatically reboot you to the bootloader so you can flash the kernel. It is done this way because if you put the PH98IMG.zip on your sdcard and flash that first you'll have trouble getting back into recovery to flash the ROM after. The hboot won't let you select recovery with that file on the sdcard (obviously, reboot recovery from the OS/ADB still works, but if you reboot and flash the kernel first, you have no way into recovery without removing the sd card). I usually only copy the ROM to my sdcard (not the kernel) to prevent getting locked out of recovery. Go into recovery, wipe data/cache/dalvik, install zip from SD, select the ROM (not the PH98IMG.zip kernel), then reboot into the bootloader and manually fastboot flash boot boot.img. Obviously you don't have to do it that way, that's just my usual method.
Hope this helps somewhat.
feralicious said:
As far as Ineffabilis GB, I haven't updated to v1.3 but I can tell you for v1.0 it stays on the white HTC screen for quite a while before booting up. Maybe you didn't wait long enough?
Click to expand...
Click to collapse
I waited like 5 minutes, I know the initial boot process usually takes longer but it usually doesn't sit at the HTC screen for a long period of time, it just seems to hang on the boot animation but I can't even make it that far.
MrSmith317 said:
So does CleanROM. First boot is a lesson in patience.
Click to expand...
Click to collapse
All CleanRom does is sit at the HTC screen for about 5 or 6 seconds, then it restarts into recovery on it's own. Both the ICS and GB CleanRoms do this.
skourg3 said:
It sounds like you're missing the part where you, you know, actually flash the ROM. The kernel zip and the ROM zip are separate; the kernel (normally found in PH98IMG.zip) is flashed in hboot/fastboot, the ROM (where the zip is called whatever) from recovery. It doesn't matter which order you flash them, but if you flash an ICS kernel and you try to boot before flashing the ICS ROM, for example, you'll get stuck on that white HTC screen when trying to boot.
Many ROMs have a script built in that when you flash the ROM in recovery it will create a PH98IMG.zip and automatically reboot you to the bootloader so you can flash the kernel. It is done this way because if you put the PH98IMG.zip on your sdcard and flash that first you'll have trouble getting back into recovery to flash the ROM after. The hboot won't let you select recovery with that file on the sdcard (obviously, reboot recovery from the OS/ADB still works, but if you reboot and flash the kernel first, you have no way into recovery without removing the sd card). I usually only copy the ROM to my sdcard (not the kernel) to prevent getting locked out of recovery. Go into recovery, wipe data/cache/dalvik, install zip from SD, select the ROM (not the PH98IMG.zip kernel), then reboot into the bootloader and manually fastboot flash boot boot.img. Obviously you don't have to do it that way, that's just my usual method.
Hope this helps somewhat.
Click to expand...
Click to collapse
I am flashing the ROM. Most roms just put the PH98IMG then automatically take you to the bootloader to flash the kernal. I've done that, probably 10 times. Then I manually flash the kernel when required too.
Like I said, this is my 7th Android phone, 3rd of which being HTC. I've been flashing ROMs since December of 2009 when the original Droid was rooted. I'm not new to this, that's why I don't understand why I'm having such a difficult time.

No recovery

so i searched but didn't see anything, so forgive me if i missed it
I recently s-off'd my flyer the revolutionary way, put clockwork mod on and flashed the XXL Sense 4.0 rom and now i cant boot into recovery...i've went into fastboot and flashed the recovery 2 or 3 times and when i try to boot into recovery it just sits at the splash screen...but boots into the rom just fine
any ideas? i can get into fastboot, h boot
you sure you are flashing the correct recovery? You may be trying to flash the gb recovery vs the HC. I would suggest lookign for an older thread in development for updating to leaked hc for flyer. In the instructions there is a link to the HC recovery
this being said if you used globatrons soff install of HC you should of already had recovery and should not of lost it by flashing the ics port
ok...searched for HC recovery...flashed and works
thanks
i had it working before i flashed...dunno what happened to it....
anyway thanks again

Didn't follow ICS flash steps properly, now I can't get any ROMS working.

OK so i am rooted, S-Off, and hboot 1.49.1107
i just flashed the firmware update and then immediately after flashed a new rom. i didn't know you had to flash the firmware and go into the OS after, then flash the rom. so it just gets stuck at the HTC screen now. how do i flash a rom with the new firmware already installed? so i have to go back to a GB rom and old firmware and try again?
If your s-off just grab a Rom and reflash I would think. I don't know why u fooled with firmware to begin with if ur s-off already.
Sent from my PG86100 using xda app-developers app
just take the OTA when it comes out. all better. LOL! BUT DON'T FORGET! look at what you flash. sometimes what you flash can cause you to loose your root.
Chillaxed said:
OK so i am rooted, S-Off, and hboot 1.49.1107
i just flashed the firmware update and then immediately after flashed a new rom. i didn't know you had to flash the firmware and go into the OS after, then flash the rom. so it just gets stuck at the HTC screen now. how do i flash a rom with the new firmware already installed? so i have to go back to a GB rom and old firmware and try again?
Click to expand...
Click to collapse
If you don't have supercid
can't go back GB RUU
Could someone please help??
tryed updating through System Update (OTA)
failed to install... said my device may have custom rom
I wasn't using a custom rom, only changed cid to use a custom rom but ended up using stock. Just forgot to change cid back.
Changed cid back to original (HTC__044) and tryed to download OTA again...
It succeeded to download and asked me to install... Accepted.
it rebooted to Recovery and failed to install.
Followed 1st post instructions (status 7)
and installed the OTA through recovery.
Instalation successful!
BUT
When I rebooted the device, it just doesn't boot.
I downloaded anryl files, but it failed to load PG86IMG.zip when I boot to bootloader. Says wrong image.
tried booting into recovery but it won't boot into recovery either.
then tried flashing recovery again and booting into recovery again. No success.
any ideas?
Thanks in advance

[Q] Help with rom liquidsmooth v2.9

hello friends wanted to know if I could help with a rom I put my htc Rezound which was its official rom 4.0.3 with locked bootloader unlock with which HTCDev because my wifi and bluetooth problems and change the boot.img and the cell was bricked me in htc screen and there is no step more, then install android systen recovery and install the rom you liquidsmooth and kenel funky but the Rezound stays in the animation of the rom and there does not pass I wonder if someone could help me I'm s-on bootloader unlock if any rom that works well with me these try installing an exe ruu but I think the 115 Error error loading the image. Thanks I hope to fix my htc.
What recovery did you use? Did you ever flash the boot.img after flashing the ROM? Also, you can't run a RUU without really being S-OFF. If you want some good ROMs, try out Chucktr's CM 11, bunchies Liquid smooth 3.2, or some other newer ROMs. Any should do. But after flashing them in recovery. You have to flash the boot.img manually in fastboot. Or else you will be stuck on boot logo forever. If you want to get back to stock, we can do that after you get booted.
Sent from my HTC One M8 Running Paranoid Android. S-OFF.
pball52998 said:
What recovery did you use? Did you ever flash the boot.img after flashing the ROM? Also, you can't run a RUU without really being S-OFF. If you want some good ROMs, try out Chucktr's CM 11, bunchies Liquid smooth 3.2, or some other newer ROMs. Any should do. But after flashing them in recovery. You have to flash the boot.img manually in fastboot. Or else you will be stuck on boot logo forever. If you want to get back to stock, we can do that after you get booted.
Sent from my HTC One M8 Running Paranoid Android. S-OFF.
Click to expand...
Click to collapse
Cm11 install the rom,gapps and your boot.img with this rom in the list of downloads to make the wipes and install everything and install the boot.img from fastboot and start tefono becomes trapped in the circle of blue animation like liquidsmooth know what would be the problem
DrakoVains said:
Cm11 install the rom,gapps and your boot.img with this rom in the list of downloads to make the wipes and install everything and install the boot.img from fastboot and start tefono becomes trapped in the circle of blue animation like liquidsmooth know what would be the problem
Click to expand...
Click to collapse
Always ALWAYS extract boot.img from rom zip and use it.
Snuzzo said:
Always ALWAYS extract boot.img from rom zip and use it.
Click to expand...
Click to collapse
Push the boot rom but still I stay in the blue circle with the name of CyanogenMod in an infinite animation that does not happen there is a splash screen, try changing the put recovery v2.7.1.0 and good while trying to clean I get the factory reset: factory reset failed, then all is well wipe cache, data, system.davilk install the rom fine but when installing i get GASPP failed, will try to update the recovery to see if that's, if you think you know where is my mistake I could say? thank you
thanks and could solve my problem this way: install the TWRP recovery-2.7.0.1-OpenRecovery-vigor.img is that I could run to perfection only thing I did not wanted to install gapps.4.4.4 then me DOWNLOAD the gapps4.4.4 (standard) cache.davilk wipe, data, system. all well factory reset then install the rom cm-11-20140605-UNOFFICIAL-standart vigor.zip and gapps, clear cache went back to bootloader and install the boot.img reincie and ready. thanks!!!:victory:

Why can't I flash ORDER ROMS

I'M confused as to why I can't flash older roms.. I have a Sprint Htc one Max with the latest Stock Rom and Hboot. I have root access and Twrp recovery installed with S-On.. Whenever i go to install an older rom the recovery just reboots... Any help would be greatly appreciated!
Stevesteve64 said:
I'M confused as to why I can't flash older roms.. I have a Sprint Htc one Max with the latest Stock Rom and Hboot. I have root access and Twrp recovery installed with S-On.. Whenever i go to install an older rom the recovery just reboots... Any help would be greatly appreciated!
Click to expand...
Click to collapse
Have you tried using a older recovery?
I've tried once, and it was it was like Twrp 2.7 something.... So everything I'm doing is right, as far as my phone being rooted, Bootloader unlocked etc.... You think it's the recovery?
Stevesteve64 said:
I've tried once, and it was it was like Twrp 2.7 something.... So everything I'm doing is right, as far as my phone being rooted, Bootloader unlocked etc.... You think it's the recovery?
Click to expand...
Click to collapse
Could be the installer script doesn't like the new recovery. What rom?

Categories

Resources