One of the SGP case is out for AT&T version
http://www.sgpstore.com/cell-phone/...sung-galaxy-s2-case-ultra-capsule-series.html
edit:
*** Please note that the case covers the microphone hole and may result in possible sound reduction.
Guess the case is the same as the galaxy version except we get the AT&T version of the screen protector..
Another one just release, SGP Samsung Galaxy S2 ATT Case Ultra Thin Air Series.
http://www.sgpstore.com/cell-phone/...ung-galaxy-s2-case-ultra-thin-air-series.html
I'm waiting on the Neo Hybrid Series
Not sure if I want to wait for the Neo Hybrid Ex or just get the ultra thin one. Pretty weird how it says the ultra thin case blocks the microphone when it doesn't get anywhere near either microphone.
Sent from my SAMSUNG-SGH-I777 using xda premium
tysj said:
Not sure if I want to wait for the Neo Hybrid Ex or just get the ultra thin one. Pretty weird how it says the ultra thin case blocks the microphone when it doesn't get anywhere near either microphone.
Sent from my SAMSUNG-SGH-I777 using xda premium
Click to expand...
Click to collapse
That's what I was thinking. Ultra Thin Air don't seem to be blocking the mic.. or it shouldn't since the top is pretty much open.. Anyone want to try it out? lol I'm thinking that they're putting that description for every single SGSII AT&T case though.
They're most likely talking about the noise cancelling mic. It's on the top, right next to and below the headphone jack.
Yes, but the Ultra Thin Air Series barely covers the top noise canceling mic from what I'm seeing.
Anywho, I emailed them asking if they had cutouts for the lanyard loop, and antenna and they said that the AT&T versions do have to for some odd reason to be compatible with the international version of the phone. Which brings me to question why they even have separate pages for the phones. Cases for this phone are sooo confusing.
So they pretty much did no editing to the case, kept it the same as the international version except give us the AT&T version of the screen protector?
tbh they're both 4.3..the att is the international one lol
How big a deal do you guys think the noise cancelling mic being covered is? If it is used only for noise cancelling then it doesn't seem like that big a deal, but I'm sure it's used for more than just that which could be kind of a pain in the butt.
Yeah, but it's just strange to have two useless cutouts that can only trap dust. Just the way they marketed them as two separate products, yet still saying they are compatible with other versions of the phone (but then not saying that the international version is compatible with the AT&T), is dumb. All for a different screen protector.
Seems like SGP removed the statement saying about covering the mic on the SGP Ultra Thin Series.. It's still stated on the Capsule.
well looking at the pictures of the ultra thin. it wouldnt cover the mic in the first place
^yup but they stated it was going to cover it when they first put that page up online lol
they make awesome cases, but their webpage management is horrendous
e.g.
http://www.sgpstore.com/blog/new-arrival-att-epic-bionic/
lol epic 4g touch as AT&T SGSII and vice versa
I'll wait for the matte finish cases from SGP. I hope they come out with one..
Hey I have the Neo hybrid case currently, its a perfect fit. It still doesn't give much grip, but it does look good and fits perfectly!
Sent from my SAMSUNG-SGH-I777 using XDA App
Stixho said:
Hey I have the Neo hybrid case currently, its a perfect fit. It still doesn't give much grip, but it does look good and fits perfectly!
Sent from my SAMSUNG-SGH-I777 using XDA App
Click to expand...
Click to collapse
Pictures, please?
Stixho said:
Hey I have the Neo hybrid case currently, its a perfect fit. It still doesn't give much grip, but it does look good and fits perfectly!
Sent from my SAMSUNG-SGH-I777 using XDA App
Click to expand...
Click to collapse
yes please pictures
Related
I know the AT&T version of the SII is the closest to the european model. The only case I find attractive is the genuine mesh case:
http://www.youtube.com/watch?v=fGOGthJy_ZE
Any idea if this case would fit the AT&T model?
Thanks!
The International version specs : 125.3 x 66.1 x 8.49 mm
AT&T version : 126 x 66 x 9 mm.
You really don;t need a case for this device. Its so slim and the back cover is readily available if one screws it up. Mine separated from removing it to switch out batteries. Then again I don;t use screen protectors either. I like hoe slick it is and the glass is really hard to mess up.
tbong777 said:
You really don;t need a case for this device. Its so slim and the back cover is readily available if one screws it up. Mine separated from removing it to switch out batteries. Then again I don;t use screen protectors either. I like hoe slick it is and the glass is really hard to mess up.
Click to expand...
Click to collapse
I agree gorilla glass is amazing I beat up my captivate. Only reason for me to get a case is if said case has a kick stand to prop up phone for movies
Sent from my SAMSUNG-SGH-I777 using XDA App
don't do it
The problem is that case leaves the corners exposed...I bought one for my international i9100
I bought the following...
http://www.ebay.com/itm/Samsung-Genuine-Galaxy-S2-i9100-SII-Mesh-Hard-Case-NEW-/180723707360?pt=PDA_Accessories&hash=item2a13f8ede0
I dropped the phone on the floor. It hit the corner and CRACK no more display. Beautiful case though...
The Official Mesh case is the only case I want to get for this device and I don't know if they will make an AT&T compatible one... It would be very nice if they did.
just chiming in..
got the black mesh case for my AT&T model.. doesn't fit..
so close but no cigar. It really is a nice case though!
Mesh case that fits i777
I have all of the following mesh cases.
These do NOT fit the Samsung Galaxy S2 i777 (AT&T):
http://www.ebay.com/itm/190577180423
http://www.amazon.com/gp/product/B0056G07Z6
This one kind of fits:
http://www.ebay.com/itm/180715368559
The fit isn't exactly perfect, but it's good enough. The texture is really nice - slightly tacky. The nice thing about this case is that the corners cover a little more of the phone than the other ones do, which should protect it a little better that the other ones. Just make a hole for the second microphone near the top, and you're good to go.
EDIT: The above case develops a crack with a few days within a few days of use. I cannot recommend it.
This case does fit perfectly:
http://www.ebay.com/itm/320701889899
but, the top and bottom of the phone are fully exposed, and there is really no protection for the front. If you want a case to prevent scratches to the back of your phone, then this will work. If you want a case to protect your phone when you drop it, this won't protect your phone in the most vulnerable places for damage - the corners.
wified said:
I have all of the following mesh cases.
These do NOT fit the Samsung Galaxy S2 i777 (AT&T):
http://www.ebay.com/itm/320701889899
http://www.ebay.com/itm/190577180423
http://www.amazon.com/gp/product/B0056G07Z6
This is the only one that fits:
http://www.ebay.com/itm/180715368559
The fit isn't exactly perfect, but it's good enough. The texture is really nice - slightly tacky. The nice thing about this case is that the corners cover a little more of the phone than the other ones do, which should protect it a little better that the other ones. Just make a hole for the second microphone near the top, and you're good to go.
Click to expand...
Click to collapse
Looks the same as the eBay ones. But you say it does fit? As in the entire rim of the phone is in the case without one side being favored?
Just curious because I love the mesh case but this one for the i9100 does not fit my phone (ATT version)
Sent from my SGH-I777 using xda premium
Coreym said:
Looks the same as the eBay ones. But you say it does fit? As in the entire rim of the phone is in the case without one side being favored?
Just curious because I love the mesh case but this one for the i9100 does not fit my phone (ATT version)
Sent from my SGH-I777 using xda premium
Click to expand...
Click to collapse
I don't understand how one mesh case can be a different size from another. I have the international version and it fits perfectly. It doesnt set in the case without a tiny bit of force, it snaps in and is a perfect fit.
Sent from my SAMSUNG-SGH-I777 using xda premium
roadrash7 said:
I don't understand how one mesh case can be a different size from another. I have the international version and it fits perfectly. It doesnt set in the case without a tiny bit of force, it snaps in and is a perfect fit.
Sent from my SAMSUNG-SGH-I777 using xda premium
Click to expand...
Click to collapse
I don't think they are differnet but the dimensions of the att version and the international version are slightly different. Also.. Im not the only one who is not seeing a perfect fit. Even the distributer that I bought it from confirmed it doesn't fit right.
Sent from my SGH-I777 using xda premium
Yes, entire rim fits in and stays in almost perfectly. It's made for the international version, so the fit isn't exactly perfect. For the price it will work until a perfect one comes out. I'm a perfectionist. Most people would probably think that this thing fits just just fine.
I haven't dropped it yet, though, so I don't know how well the case will stay on the when dropped. But it is a very good fit.
Coreym said:
Looks the same as the eBay ones. But you say it does fit? As in the entire rim of the phone is in the case without one side being favored?
Just curious because I love the mesh case but this one for the i9100 does not fit my phone (ATT version)
Click to expand...
Click to collapse
The two mesh cases that don't have a metal name plate on them are slightly different. Look under the speaker hole, and notice that one has mesh holes all the way across, and the other one doesn't. You want the one that doesn't have holes all the way across the bottom row of mesh holes below the speaker hole.
wified said:
Yes, entire rim fits in and stays in almost perfectly. It's made for the international version, so the fit isn't exactly perfect. For the price it will work until a perfect one comes out. I'm a perfectionist. Most people would probably think that this thing fits just just fine.
I haven't dropped it yet, though, so I don't know how well the case will stay on the when dropped. But it is a very good fit.
The two mesh cases that don't have a metal name plate on them are slightly different. Look under the speaker hole, and notice that one has mesh holes all the way across, and the other one doesn't. You want the one that doesn't have holes all the way across the bottom row of mesh holes below the speaker hole.
Click to expand...
Click to collapse
..right on, thanks for the replies!
Sent from my SGH-I777 using xda premium
wified said:
The two mesh cases that don't have a metal name plate on them are slightly different. Look under the speaker hole, and notice that one has mesh holes all the way across, and the other one doesn't. You want the one that doesn't have holes all the way across the bottom row of mesh holes below the speaker hole.
Click to expand...
Click to collapse
dude.. where do you get the "right" GS2 case with the "right" mesh holes??
because mine doesn't have the name plate, but has mesh holes all along the bottom and definitely does not fit correctly!!
Coreym said:
dude.. where do you get the "right" GS2 case with the "right" mesh holes??
because mine doesn't have the name plate, but has mesh holes all along the bottom and definitely does not fit correctly!!
Click to expand...
Click to collapse
See post #7 above, the last link. You bought the one that doesn't fit. The other one with no mesh holes across the bottom of the speaker hole does fit. Look carefully, and you'll see the difference. I just ordered another one off of ebay last night for $2.50.
wified said:
See post #7 above, the last link. You bought the one that doesn't fit. The other one with no mesh holes across the bottom of the speaker hole does fit. Look carefully, and you'll see the difference. I just ordered another one off of ebay last night for $2.50.
Click to expand...
Click to collapse
alrighty.. I seriously don't think there is another case out there this nice.. so, I'm gonna give this one a shot, despite it clearly saying it is compatible with the i9100, and not the i777 . But.. i have holes under my speaker button, so you might be on to something.. I'll order later today- and let you know when I get it.. thanks again.
ugh.. and they don't have it anymore
This is considered to be a row of holes below the speaker hole right. Cause this one fits perfectly.
Sent from my SAMSUNG-SGH-I777 using xda premium
Ah here it is
Sent from my SAMSUNG-SGH-I777 using xda premium
roadrash7 said:
Ah here it is
Sent from my SAMSUNG-SGH-I777 using xda premium
Click to expand...
Click to collapse
I found one supposedly with no holes.. ordered. We'll see. Thanks!
Sent from my SGH-I777 using xda premium
Amazon now has mesh cases it says for the att model. Its a 2 piece but looks nice. Will be ordering one later today
http://www.amazon.com/gp/aw/d/B005Z48CH4/ref=aw_ls__1?coliid=I2B8SI36ZXUJEZ&colid=3V7XKBX2FRA6K
Sent from my SAMSUNG-SGH-I777 using Tapatalk
SGP's site says the cases for the international version of the Galaxy S2 are compatible with the AT&T and Asian version. This is great news as these are very high quality and stylish cases. I e-mailed them about whether or not a different screen protector would come with the case as it doesn't have the home button but either way I know what I'm getting!
http://www.sgpstore.com/cell-phone/samsung/galaxy-s2.html
The phone is longer and thicker. Get it at you own risk. There is another thread that talk about the dimensions.
I've been told on another forum that a member who works for AT&T and already has the phone has confirmed the fit of the SGP. (pretty sure)
I have an incipio tpu ish case on mine...
Fits perfect but it looks like the 2nd microphone on top is covered.
Sent from my SAMSUNG-SGH-I777 using xda premium
i like nillkin case and case mate
does those fit？
NILLKIN
CASE-MATE
L Eric said:
SGP's site says the cases for the international version of the Galaxy S2 are compatible with the AT&T and Asian version. This is great news as these are very high quality and stylish cases. I e-mailed them about whether or not a different screen protector would come with the case as it doesn't have the home button but either way I know what I'm getting!
http://www.sgpstore.com/cell-phone/samsung/galaxy-s2.html
Click to expand...
Click to collapse
It may fit, but the noise cancelling mic on the AT&T GS2 is not aligned in the center like on the international version. If the case has a small hole for the mic you would have to poke a different hole if you use it for the AT&T GS2.
Email from SGP
We are in the process of making screen protector for ATT version Galaxy S2, and we will have them in about next week.
For the cases, please allow 1-2 weeks to find out if they are going to be compatible with our lineup.
Please email us if you have any other question.
SGP Screen Protectors are already available on their site.. unless it's not ready to ship?
Got this email today, asking about cases.
We do not know if we are going to make cases for ATT Galaxy S2 at this moment.
Please check back our website next week for future update.
Thank you.
SGP just removed their statement on their website about the our At&t version being compatible. Glad I just went with the casemate
Sent from my SAMSUNG-SGH-I777 using xda premium
HTC Chris said:
SGP just removed their statement on their website about the our At&t version being compatible. Glad I just went with the casemate
Sent from my SAMSUNG-SGH-I777 using xda premium
Click to expand...
Click to collapse
They did that because they now have an "AT&T version" the only difference between these two are that the AT&T version has an AT&T compatible screen protector so not the biggest deal.
I just got my SGP Ultra Thin Air case in the mail today. Although the case was obviously made for the international version, it fits very nice (with the addition of both the case liner stickers that are included). Most importantly, the second mic is NOT blocked.
edit: pictures in this post
Does anyone know a good case with a kick stand? The most important features are just the kickstand and thinness. I know Casemate makes a great one, but it's way too thick.
This one seems okay:
http://www.ebay.com/itm/TPU-FoldOut...ccessories&hash=item2eb8015e60#ht_2188wt_1163
But I'd have to make a slight modification for the microphone, and most importantly, I don't know if it will fit. I'm quite weary of any of these cases that can fit both the international and ATT versions.
I bought my GS2 on launch day and ATT had 4 different cases in the store. Case Mate was the only one offered with a kick stand but it felt cheap so I opted not to get it. There was a nice leather case but none of them fit the phone, lol. Guess those will be sent back.
jm1280 said:
I bought my GS2 on launch day and ATT had 4 different cases in the store. Case Mate was the only one offered with a kick stand but it felt cheap so I opted not to get it. There was a nice leather case but none of them fit the phone, lol. Guess those will be sent back.
Click to expand...
Click to collapse
I just need thinness and a kickstand. :\
CalvinL said:
I just need thinness and a kickstand. :\
Click to expand...
Click to collapse
I am with you.
Sent from my SAMSUNG-SGH-I777 using XDA App
try the casemate case...I know it looks cheap, but it has a kickstand and its hard rubber, so its decent for impact
Case
Thanks for the link and the info...I too got my SGSII on launch day and was disappointed at the lack of accessories and items available for the AT&T branded SGSII. I even have communicated with Body Glove about one of their cases (As I have been a fan of that one and used it on my Cappy and Infuse both) but they said they will not be producing a Body Glove case for our phone So I am going to try the above listed one and I will let you know. Maybe even post some screens and update the thread.
hkeyman said:
Thanks for the link and the info...I too got my SGSII on launch day and was disappointed at the lack of accessories and items available for the AT&T branded SGSII. I even have communicated with Body Glove about one of their cases (As I have been a fan of that one and used it on my Cappy and Infuse both) but they said they will not be producing a Body Glove case for our phone So I am going to try the above listed one and I will let you know. Maybe even post some screens and update the thread.
Click to expand...
Click to collapse
Awesome. Please do.
I use the casemate pop case with the kickstand, it's held up pretty well. Used one on my infuse previously as well.
Sent from my SAMSUNG-SGH-I777 using XDA App
bigsho said:
I use the casemate pop case with the kickstand, it's held up pretty well. Used one on my infuse previously as well.
Sent from my SAMSUNG-SGH-I777 using XDA App
Click to expand...
Click to collapse
I agree. Its no body glove, but it gets the job done.
I use the Casemate one as well.
Gets the job done
I bought this today instead of the leather case...
Its definitely not as bulky as I thought it would be (previous experience with the thrill and infuse pop cases) and the kickstand works great!
It also fits real nicely. The leather case seemed a little too tight and that it would require some effort to put in properly
Sent from my SAMSUNG-SGH-I777 using xda premium
F_L_Abs said:
I bought this today instead of the leather case...
Its definitely not as bulky as I thought it would be (previous experience with the thrill and infuse pop cases) and the kickstand works great!
It also fits real nicely. The leather case seemed a little too tight and that it would require some effort to put in properly
Sent from my SAMSUNG-SGH-I777 using xda premium
Click to expand...
Click to collapse
You bought what instead?
CalvinL said:
You bought what instead?
Click to expand...
Click to collapse
Lol whoops.
I got the case-mate pop case instead!
Sent from my SAMSUNG-SGH-I777 using xda premium
Had trouble verifying my Paypal account for some reason. I ended up paying more at Amazon for the case. Ended up costing $8.90 cause of NY tax.
check out my review on the case-mate http://forum.xda-developers.com/showthread.php?t=1286742
CalvinL said:
Does anyone know a good case with a kick stand? The most important features are just the kickstand and thinness. I know Casemate makes a great one, but it's way too thick.
This one seems okay:
http://www.ebay.com/itm/TPU-FoldOut...ccessories&hash=item2eb8015e60#ht_2188wt_1163
But I'd have to make a slight modification for the microphone, and most importantly, I don't know if it will fit. I'm quite weary of any of these cases that can fit both the international and ATT versions.
Click to expand...
Click to collapse
I've had this for about 3 days now. I think its called Minisuit
Pros: Thin, light, tight fit, good kickstand, cheap, quick delivery
Cons: no hole for secondary mic, generic micro usb rechargers have trouble given cutout (stock cable works fine)
Happy enough with it for now.
CalvinL said:
Does anyone know a good case with a kick stand? The most important features are just the kickstand and thinness. I know Casemate makes a great one, but it's way too thick.
This one seems okay:
http://www.ebay.com/itm/TPU-FoldOut...ccessories&hash=item2eb8015e60#ht_2188wt_1163
But I'd have to make a slight modification for the microphone, and most importantly, I don't know if it will fit. I'm quite weary of any of these cases that can fit both the international and ATT versions.
Click to expand...
Click to collapse
I just bought this same brand of case on Ebay except smoke color.
http://www.ebay.com/itm/Smoked-Kick...856661?pt=PDA_Accessories&hash=item1e67678615
I'll post a review once I receive it.
BigBopper said:
I've had this for about 3 days now. I think its called Minisuit
Pros: Thin, light, tight fit, good kickstand, cheap, quick delivery
Cons: no hole for secondary mic, generic micro usb rechargers have trouble given cutout (stock cable works fine)
Happy enough with it for now.
Click to expand...
Click to collapse
Yeah, it's called Minisuit. I ordered it via Amazon.
Luckily it's TPU and not a hard case so I can make that second opening.
ozone777 said:
I just bought this same brand of case on Ebay except smoke color.
http://www.ebay.com/itm/Smoked-Kick...856661?pt=PDA_Accessories&hash=item1e67678615
I'll post a review once I receive it.
Click to expand...
Click to collapse
I was considering that one, but hard cases are more difficult to cut the mic opening.
ny gs2 doesn't say Samsung or att on front.... only says galaxy S on back cover... is that supposed to be like that
Sent from my SAMSUNG-SGH-I777 using xda premium
Ok, I got the case.
Doesn't fit 100%.
The bottom in particular, but it's barely noticeable. The top mic needs to be cut out some more, which shouldn't be too difficult since it's not plastic.
Case actually looks a lot better than I expected. The kickstand is very flimsy, which I expected. Once you put the stand up, don't put any pressure on it. It's very likely to just snap off. The power button becomes pretty stiff, too.
They also ran out of minisuit keychain screen cleaners. They said if I want one, email them about how I feel my order is "incomplete without one," and they'll send one when they have more stock.
Kind of a weird way to make us word it.
Either way, I'd recommend this if you need a very sleek and thin case that doubles as a flimsy kickstand.
Does anyone know if there are any Bumper Cases for the ATT SGS2 or anything that fits the ATT version?
I'm looking for something that would give me some drop protection without really adding any bulk to the phone. And I think a bumper case would be great if I can find anything.
So far I have not really been able to find anything. I saw a few international bumper cases but I don't know if they fit and I don't want to spend money for international shipping without knowing that it would fit properly.
This is the only one I could find.
cellular factory.com/find/index.php?qry=Plastic%20Bumper%20Frame&fq=cat:%22SAMSUNG%22
Take out the space in cellular factory
Apply "CVDQY4" for free shipping.
Yeah but that's for the international sgs2. I'm worried picking one up for the international version because the dimensions are different.
Sent from my SGH-I777 using Tapatalk
http://www.sgpstore.com/cell-phone/...sung-galaxy-s2-case-neo-hybrid-ex-series.html
It will fit, just that it will cover the top noise canceling mic, won't effect it too much. You can always drill/poke a hole if you want.. lol
http://www.trait-tech.com/s.ashx?skey=bumper&s_ok=Search
I purchased the one for $3.79. Standard shipping was only $4 so even if it doesn't fit I am only out $8. Only thing is its like a three week shipping time so it will be a while before I can give you feedback.
Sent from my SGH-I777 using XDA App
I thought the dimensions were the same for the i9100 and the i777....
Blaze9 said:
I thought the dimensions were the same for the i9100 and the i777....
Click to expand...
Click to collapse
They are the same... But international cases cover the top noise canceling mic on AT&T model since the mic is placed a different place compared to the international.
runtohell121 said:
They are the same... But international cases cover the top noise canceling mic on AT&T model since the mic is placed a different place compared to the international.
Click to expand...
Click to collapse
They are actually slightly different in dimensions.
phonearena.com/phones/compare/Samsung-Galaxy-S-II,Samsung-Galaxy-S-II-AT-T/phones/5106,5639
^^^Well... similar enough for most if not all cases will fit..
So all of the spg cases will fit?
Sent from my SGH-I777 using Tapatalk
According to them, yes. Just that if you order international version, they will give you the international version screen protector.. They're slowly repackaging all/most of their international version cases for AT&T.
http://forum.xda-developers.com/showthread.php?t=1290957
I purchased the black bumper case from this ebay seller. http://www.ebay.com:80/itm/ws/eBayISAPI.dll?ViewItem&item=220870704009&ssPageName=ADME:L:OC:US:1123
It came really fast. Shipping only took 2 days.
I really like this case. It is made of hard and soft tpu. It fits perfectly even though its made for the international version. It does have the cut out in the corner for the antenna. It DOES NOT have the right cut out for the second mic. I was going to drill a hole, but in my testing the mic still seems to work as it is barely covered.
This is a great bumper case for the price. It adds no bulk and still protects the phone. I will try to add pics later.
Are there any good bumper cases without the hole in the corner? I have a fear that if I ever drop my phone it will land exactly on that unprotected corner.
http://www.ebay.com/itm/-/131501112424?roken=cUgayN&soutkn=H4rQPp
Comes with screen protector, though I use mine with Zagg
Erm, the link leads to a pair of earphones?
Do you mean this one?
http://www.otterbox.eu/en-ie/samsun...tml?dwvar_sam4-galaxy-note-3_color=J1#start=1
I must say I much prefer my black version. This seems like too much of a dirt magnet to me.
Sent From My Samsung Galaxy Note 3 N9005 Using Tapatalk
ShadowLea said:
Erm, the link leads to a pair of earphones?
Do you mean this one?
http://www.otterbox.eu/en-ie/samsun...tml?dwvar_sam4-galaxy-note-3_color=J1#start=1
I must say I much prefer my black version. This seems like too much of a dirt magnet to me.
Sent From My Samsung Galaxy Note 3 N9005 Using Tapatalk
Click to expand...
Click to collapse
http://www.ebay.com/itm/-/131501112424?roken=cUgayN&soutkn=H4rQPp
It's not exactly a magnet - I've had mine a mine a month and it looks fine
I bought one a few months back , in fact bought 2 as i had misplaced the one and later found it ,
For me they are just uselss, huge protection but bloats this beauty like a buffalo, becomes so much more difficult to handle the phone with one hand.
Certainly not for me , but if you have clumsy hands and your phone tends to fall a lot then go for it with eyes closed , nothing can ever protect a phone better than OTTERBOX