Related
Since I haven't seen many people here mentioning it, I thought it'd be useful to talk about my experience with Brando anti glare protector for Touch HD.
Few months ago, when I stockpiled on the protectors, I ordered one, just for the testing purposes. They were cheap, so I figured why not.
Now that my previously used ultra-clear protector got badly scratched and even deformed after a situation in which my Touch HD fell face down directly onto a neck of a beer bottle (don't ask) I realized I had to change it. The screen magically survived without any trace of contact, and I was very lucky for having the protector on - without it, I'm sure the screen would've had to be replaced.
Applying the protector
So, I pulled out the anti glare protector and applied it. First of all, the application procedure was slightly easier then with ultra-clear. The anti glare protector seems to be a bit stiffer and requires only one side of the protector to be peeled off before application, whereas the ultra needs 2 protective layers removed. It could also be simply the fact that I got some practice with these things now... But it felt easier in any case.
Fit
As with other Brando protectors, this one is also a bit too short on the bottom. If you start directly at the top of the device screen, leaving absolutely no space between the protector and the screen edge, at the bottom side you'll end up about 1.2 mm too short. For me it's not a big problem, and I certainly don't notice this, since the bottom part is usually covered by hand or fingers, but people who insist on perfection may find this annoying. The cut out for the speaker seems to sit well in it's place, and also be aware that there is a U-shaped cut out for the front camera. The ultra clear covers the camera, but obviously because of the grain-effect I'll get to in a moment, this was not possible here.
Brightness
After applying it I was very happy with the overall look. The screen brightness was the same - I did not notice any reduction in this regard, so I can say that this is very good in terms of transparency.
Sharpness and visibility
As for the sharpness / visibility, I'm hesitant to even say it, but there is a small difference when compared to ultra clear, or no protector of course. But it's a small difference. The effect is sort of like a very, very fine grain pattern across the screen, but I can't stress this enough - it's really no big deal. I'm a photographer and I work with graphic editing software, so my eyes are trained to notice every damn detail. For most people, I would assume that they would hardly notice any difference. So, to cut the long story short - the sharpness stays the same, but you get a gentle grain effect which is usually noticeable only on white background.
To sort of get a feeling of what you can expect, I can recommend you open up a bitmap in Photoshop and add 1 percent uniform noise filter. This is about the same amount of grain you'll see on the screen when using this protector.
Resistance to smudging
One very cool thing I noticed is that anti glare protector also seems to be MUCH, MUCH better when it comes to smudges. With ultra clear, I would usually feel a need to wipe the phone after each conversation or a typed SMS. Basically, any contact with skin would cause a mess on the screen. With anti glare, this is still present, but to much lesser extent. I feel that this is a big advantage when compared to ultra clear protector.
Touch sensation and sensitivity
Well, first of all, it does feel slightly different under your finger. Right after applying it, the finger movement across the screen felt rather stiff. There was definitively more friction going on then with ultra clear, but after one or two days of usage, this effect seems to wear off, or you simply get used to it and don't notice it anymore. I can say I have come to actually like this. Oh, and there is no degradation of screen sensitivity that I noticed. I did not feel that I had to push the screen any harder then before, so this is another strong point.
Anti-glare feature
And finally, what would be an anti glare protector review, without comment on the anti glaring From my non scientific tests, the feature works very well. The glaring is indeed much reduced. I would say about 50-60% less, if not even more. Also, when you do get some glare, for example from the direct light above your head, it's much less obtrusive then with ultra-clear or without protector. The effect is subtle, and will not interrupt you from reading things on the device.
Conclusion
All in all, if you can accept the slight grain effect, this is a great thing for people who use Touch HD in bright light or simply feel annoyed with the fact that the default screen protector is so polished you can sometimes see more of your face on it than the screen itself.
So, by sacrificing 5% of visual quality, you can get about 50% more on the usability. I don't regret buy it at all - in fact I only regret not ordering more on my last purchase.
p.s. I have absolutely no connection with Brando, nor I will get anything out of writing this review. I also have to say I have been ordering stuff from them for a while now, and have been very satisfied with their services so far.
That's a very in depth review which I am sure many will find useful.
I have a Brando Ultra Clear and have recently been using my HD in the garden as the weather in the UK has been so hot and sunny recently. I thought it would never work outside because of the bright light but with screen brightness setting on full I could not believe how good it was. No strain on the eye at all with the sun behind or in front. Not sure if this is because of the HTC screen or the Brando Ultra Clear protector - I've not tried it without.
Sounds like Anti Glare is even better from your review but I would say that Ultra Clear is still very useable in bright light.
Hi, been looking for a proper screen protector but haven't really gotten to it yet..
After reading this I'm convinced, I'm gonna get myself one!
...just can seem to locate one in the Netherlands...all shops sell the ultra clear (with anti glare in the descriptive text), but not just an anti glare one.
Anyone?
Thanks
*ordered through shop.brando etc..*
are you going to post some images?
Psygnosis84 said:
are you going to post some images?
Click to expand...
Click to collapse
Not gonna make any promises, but being a photographer, I guess I should
great review...I hate glare! So, I'm ordering one of these Brando anti-glare screen protectors.
Has anyone compared this Brando anti-glare to the Boxwave anti-glare?
As you say above "The effect is sort of like a very, very fine grain pattern across the screen".
The Boxwave has this and it is almost unacceptable (to me) and was wondering if this Brando was any better (clearer) in this department.
Thanks.
zozz said:
Has anyone compared this Brando anti-glare to the Boxwave anti-glare?
As you say above "The effect is sort of like a very, very fine grain pattern across the screen".
The Boxwave has this and it is almost unacceptable (to me) and was wondering if this Brando was any better (clearer) in this department.
Thanks.
Click to expand...
Click to collapse
Hi, I haven't used any Boxwave protectors, so I can't really say, but I am interested to hear from users that tried them.
Personally, I really got used to Brando anti-glare, and I find the device much more comfortable to use in everyday situations. And I really like the fact that the smudging is MUCH less of a problem.
Anyone know where these can be got in the UK?
**EDIT** Nevermind, I got it here - http://shop.brando.com
$3 shipping worldwide, $12 in total = just under £8...
AndyCr15 said:
Anyone know where these can be got in the UK?
**EDIT** Nevermind, I got it here - http://shop.brando.com
$3 shipping worldwide, $12 in total = just under £8...
Click to expand...
Click to collapse
http://www.inkino.co.uk/zen/index.php?main_page=index&cPath=69&zenid=ebdc7d2530edpgsgpjp2v0qbb1 in Tottenham Court Road fit them for you in case you've got a shaky hand
Not sure if they will have anti glare though.
zozz said:
Has anyone compared this Brando anti-glare to the Boxwave anti-glare?
As you say above "The effect is sort of like a very, very fine grain pattern across the screen".
The Boxwave has this and it is almost unacceptable (to me) and was wondering if this Brando was any better (clearer) in this department.
Thanks.
Click to expand...
Click to collapse
Hmm, I actually prefer Boxwave's grain pattern because it gives "texture" to the screen. Yeah it does lower the screen's image quality but overall it's quite nice I reckon
I got mine today, I really like it. It has a matt finish rather than a gloss finish which I prefer the feel of.
Unfortunately it took about 8 attempts to get it on without the edges slightly overlapping and causing the long bubble along the edge and now I think I have some dust under it
Still, it's a great fit, feels great but I have yet to see how well it's anti-glare properties hold up.
Brando, not so good
I have to disagree. At first I was very excited it about it but then... I find it horrible! I was not able to use it. Could not get rid of the bubbles. I think its cut too big! Wash it and nothing but dust gets caught on the backing that sticks to the screen which has some kind of glue like surface. After washing it gets marks all over and dust. I wasted my money. Expensive, not worth it, needs work. I have installed many screen protectors on my touch hd.
Nope, nope, nope... had none of those problems here...
I've had good luck with Brando compared to other protectors.
c6638746 said:
I have to disagree. At first I was very excited it about it but then... I find it horrible! I was not able to use it. Could not get rid of the bubbles. I think its cut too big! Wash it and nothing but dust gets caught on the backing that sticks to the screen which has some kind of glue like surface. After washing it gets marks all over and dust. I wasted my money. Expensive, not worth it, needs work. I have installed many screen protectors on my touch hd.
Click to expand...
Click to collapse
All you need is a steamy bathroom.
Hey everyone,
looking for a great screen protector that helps with the glare issue and viewing angles. I'm not expecting wonders but anything to help. Hate the fact I see reflection on screen sometimes. Any info would be great. Thanks
Gemni69 said:
Hey everyone,
looking for a great screen protector that helps with the glare issue and viewing angles. I'm not expecting wonders but anything to help. Hate the fact I see reflection on screen sometimes. Any info would be great. Thanks
Click to expand...
Click to collapse
How about checking the Skinomi thread in this very first page of this section ?
I just orderded some screen protectors from ebay hong kong. 11.99 for 3. ill let you know how they work.
Good Screen Protector
Ordered one from Amazon made by Aurum(do a search). It came quickly and I am very happy with it, wished I waited a few days, they have a deal going on with it.
It says its made from Japanese PET, in my experience it is better than those "military" strength ones like Zagg etc(bad evo 4g experience). This one has a dry application and protected on both top and bottom by covers (a protector for the protector). Ships from the US.
I have the Skinomi. I'm happy with it, but it does not appear to help with glare or screen angles (though, honestly, I only used it for a few minutes before installing the protector).
dj_justice said:
I just orderded some screen protectors from ebay hong kong. 11.99 for 3. ill let you know how they work.
Click to expand...
Click to collapse
which ones did you get?
-J
Go with the Skinomi one. It's cheap (relatively if you consider lifetime free replacement) and if you don't botch the installation it looks fantastic. And... you don't have to wait three weeks for something to come from China.
Don't get me wrong, I buy stuff from China sometimes but only when I can't get it here or if it's a lot more money to get it from here.
Anyone have recommendations for screen protectors? Looking for helping with anti glare and no finger prints on it. Any info would be great. Thank for all the feedback so far.
Traderny said:
Ordered one from Amazon made by Aurum(do a search). It came quickly and I am very happy with it, wished I waited a few days, they have a deal going on with it.
It says its made from Japanese PET, in my experience it is better than those "military" strength ones like Zagg etc(bad evo 4g experience). This one has a dry application and protected on both top and bottom by covers (a protector for the protector). Ships from the US.
Click to expand...
Click to collapse
I just ordered one of the Aurums too. I have a "matte" type screen protector on my iphone and I really like it so I hope the aurum one is similar. I will update once it arrives.
emersonlp said:
I just ordered one of the Aurums too. I have a "matte" type screen protector on my iphone and I really like it so I hope the aurum one is similar. I will update once it arrives.
Click to expand...
Click to collapse
Do you mean this one ? according to the user image its not custom made (no holes for the camer/sensors) not sure if it would even cover the bezel + the screen.
sjmoreno said:
Go with the Skinomi one. It's cheap (relatively if you consider lifetime free replacement) and if you don't botch the installation it looks fantastic. And... you don't have to wait three weeks for something to come from China.
Don't get me wrong, I buy stuff from China sometimes but only when I can't get it here or if it's a lot more money to get it from here.
Click to expand...
Click to collapse
The Skinomi one requires a WET application, that then has to dry, do you really want to spray some liquid on your new g-tab? I tried this on my Evo installation was a pain but then my fingers got stuck scrolling, so I learned my lesson and stick to the PET material which has a silicone coating for smooth movement
Aurum Screen Protector
You are right, I have the Aurum one from Amazon on my G-tablet, and there are no holes, but I do not see a difference in camera performance. The protector covers bezel to bezel. I've used the camera with and without the protector, all I know is that it is as grainy before as it was after the Aurum screen protector. I do not use the camera(I really do not need anyone getting scared looking at me) so it's fine by me, it the smoothness of movement that matters.
just my $0.02, but why not use the one by Zagg....?..
http://www.zagg.com/invisibleshield...es-screen-protectors-covers-skins-shields.php
Traderny said:
You are right, I have the Aurum one from Amazon on my G-tablet, and there are no holes, but I do not see a difference in camera performance. The protector covers bezel to bezel. I've used the camera with and without the protector, all I know is that it is as grainy before as it was after the Aurum screen protector. I do not use the camera(I really do not need anyone getting scared looking at me) so it's fine by me, it the smoothness of movement that matters.
Click to expand...
Click to collapse
Thanks for the info, Traderny. Would you say that the Aurum screen protector allows for smoother gliding movements than the unprotected GTab screen? I'm hoping to find something that provides a nice swipe feel. Too often my fingers would "stick" to the naked screen or (less so, but still) the Skinomi protector.
My .2 cents
Traderny said:
The Skinomi one requires a WET application, that then has to dry, do you really want to spray some liquid on your new g-tab? I tried this on my Evo installation was a pain but then my fingers got stuck scrolling, so I learned my lesson and stick to the PET material which has a silicone coating for smooth movement
Click to expand...
Click to collapse
Wet application screen protectors have been around for a while and it has been shown to not be an issue if you follow the directions on installation. There are thousands of people that have used wet installation screen protectors here in the gTab forums that have reported no residual issues with the gTab during/after application.
Also, you don't spray liquid on the gTab, rather you're supposed to spray the liquid on both sides of the screen protector before application and dab up the excess liquid as you work it to the edges with the provided plastic card.
I've used both PET and this style of screen protectors on devices before and I prefer this over the PET as I have found the PET style protectors to be too shiny for my tastes.
Among the most helpful reviews for the PET protector on Amazon there are these comments:
1.) Good product, but a pain to put on. Just the slightest piece of dust will cause an air bubble.
2.) According to the packaging, this item is "Finger print free" and "Bubble free application". I experienced both. I would NEVER purchase this product again or recommend it.
Just goes to show you that people will find something to complain about no matter what the product is.
Protectors Protect
My experience with screen protectors on cell phones is that they are only good to protect the screen from damage. All of them will show fingerprints, smudges, grease and oil. This is esp. true with a touch screen. it's like wearing glasses you got to clean them alot. So save time money and headache by putting a microfiber cloth in the bag with your Gtab.
I went with the Exim anti-glare screen protectors, but did have to wait for shipping from China. I bought a complete skinomi skin set, and promptly botched the wet application of the screen protector, but since I wanted the anti-glare it just meant a week wait for the Chinese Air Mail which I had already ordered.
Overall I like the Exim, it was easy to install without any bubbles, though you might want to trim the corners a bit as its a very tight fit. I ended up cutting them off after applying it because I had the screen on perfectly without a single dust mote making a raised area. I don't mind a poorly cut corner, but do wish I had just done a quick trimming beforehand as I wasn't perfectly centered.
2 for $12.99... Was worth the wait.
Hey Naieve,
does it really help with the anti glare issue? Also does it have any issues with the touch screen interface? Is the screen protector to thick that it doesnt detect your finger movement on the screen? Any help on the finger print issues haha?
It helps some with the glare, definitely diffuses the light, but it looks more like a compromise in between a clear protector and some of the very heavy anti-glare screen protectors I've seen. I like it because of this actually. As to issues with the touch screen, I spent some time googling before buying, and while I forget where I read it the fact is there is no difference while using this protector. Even a light touch still works just fine. I wonder if that is the reason this AG protector diffuses less light, as I have heard of some AG protectors being too thick and screwing up touch. It does still show fingeprints, but its not that bad and is easy to clean. Definitely less noticeable than just the screen itself.
aasoror said:
Do you mean this one ? according to the user image its not custom made (no holes for the camer/sensors) not sure if it would even cover the bezel + the screen.
Click to expand...
Click to collapse
I said I would update once my Aurum arrived. Like others have mentioned, there is no cutout for the camera or sensor - I don't know what effect that has nor do I really care. I never use the camera anyway.
The protector itself fits perfectly on the screen - it is so perfect that I had trouble aligning it properly and i would get halfway done installing it and notice it was running off the side of the screen slightly.
It took a few minutes to install because I did want it to be perfect. Now that it is installed I am really happy with it. My fingers slide better across the screen and there are far less fingerprints. I am happy with my purchase.
Reserved.
Previous thread was closed due to not being able to to accept any more requests.
Please post reviews here instead, thanks!
Now Taking Orders! PM me for details. Only post in this thread if you can't PM yet.
Saved for video review
I got the cover today, went on the first time without airbubbles, but unfortunately I got a a hair stuck under the cover. I got it on right the second time, and I'm really loving tthe cover. Its great for reducing the finger prints and glare. It is very smooth and doesn't have the orange peel texture of a lot of other screen protectors, I wouldn't mind getting one for my Droid Charge.
I got mine last night. Brought it to work this morning and slapped it on.
All I can say is I hate air bubbles and this went on the first time without issue.
It is smooth, cut down on the glare, fingerprints less noticeable, and it looks fantastic...
I am absolutely impressed by this. I may have to find out how to get a spare.
Nice can't wait to receive mine and write up a review. Hopefully my stylus will be in at the same time so I can let you know how it works with the stylus.
Recieved mine this morning. The install went smoothly, very few air bubbles that were easy to work out. The tip for removing dirt/hair trapped under the cover was great. Cover does really reduce glare and fingerprints nicely. I like the texture of the cover, it is not as smooth as the TF glass, just right to let fingers glide without grabbing.
All in all I would buy this cover.
Thanks
Just received mine today, install was easy and air bubble was easier to get out compare to what i have used before. Pretty good cover i'd say.
Just got mine as well today, install went reasonably smooth. There are a couple imperfections, but those were my fault and not the products fault. It definitely reduces the glare, and I don't notice fingerprints at all. The camera hole lines up perfect and doesn't affect it at all. Definitely one of the better screen protectors out there. The tip for getting rid of dust worked great.
I will try and get a better picture later; camera didn't want to auto focus properly.
Thanks all for the reviews. I will be posting a BUY thread in the Marketplace section once I get a few more reviews. These will be retail units with complete packaging. So keep those reviews coming!
PS Anyone recommend a cheaper/faster shipping alternative? I'm shipping them via USPS First Class ~$1 to $2 depending on location.
PPS Looking forward to the video reviews
Just got mine. Went on as easy as any screen protector I have tried. No problem with bubbles, reduces prints and glare, also the fit is spot on, only negative comments would have to be that it's not as smooth as glass. I would recommend this product.
Got mine today. Slapped it on, luckily no hair\dust. Minor bubbles which im slowly seeing go away. Glare is minimal as well as the fingerprints. By far much better than the one i received with my case from amazon. Putting an affordable price on it should make you and lots of users happy. Id buy another if need be. Thanks
Thanks to cheinb once again for the free sceen protector your generousity is greatly appreciated.
Received my Screen protector this morning in the mail and was dissapointed to see that customs or the mailman (not sure who was to blame) had decided to fold the package in half.
Despite the crease i still managed to get it to flatten out enough to be useable so I proceeded to line up the edges and found it to be a perfect fit, nice!
The finish on the screen protector adds a matte effect to the display helping to reduce glare in a sunny/brightly lighted environment, welcomed as another added bonus no doubt. The smooth surfaced finish also seems to attract significantly less fingerprints and makes the scrolling and swiping flow better.
In summary i am more than pleased with the build quality and perfect fit of cheinb's asus transformer custom screen protector, now to see how it will stand the test of time and close encounters with my monsters i mean children.
thanks again cheinb good looking out!
I received mine at the beginning of the week, and had absolutely zero problems installing it. I've installed many screen protectors in the past, and this had to be the easiest one I've ever done. The instructions were simple, and I had barely any bubbles that were slowly dissipating.
The feel of the screen protector is great, just the right amount of slide and it really cuts down on the glare.
All in all, one of the better screen protectors I've used, in all categories (Installation, protection, glare reduction, surface feel).
The TF is uses corning gorilla glass, really no need for screen protectors, unless you plan on throwing your devices around. Check youtube for gorilla glass reviews.
Sent from my Transformer TF101 using xda premium
still waiting on mine
fliparsenal said:
still waiting on mine
Click to expand...
Click to collapse
hey Fliparsenal,
You were one of the first batch. Let me know if you still haven't received it in a few days.
chienb
Good!
I got mine yesterday and also applied it yesterda.
The protector is quite thick and sturdy. There was a small paper with sintructions as well.By design it allows for less air bubbles and I have only a few minor ones on the sides because of my in experience.
It has reduced the glare and made the screen less slippery. Fairly thick and I am sure it will last for a long time. The adhesive is also pretty strong. Would have been even greater with a slight blackish tint.
In short I recommend it.
fliparsenal said:
still waiting on mine
Click to expand...
Click to collapse
Same here nothing yet.
Excellent
Received mine the other day, and have had a few days to use the protector.
The following is my opinion. Screen protectors aren't for everyone, but personally I'd rather make a $20 'oops' than have to live with scratches. I don't see the harm in a protector, and in my experience they reduce fingerprints and glare like mad... so, do what you want.
Anyway, here's what I think of this protector:
Installation:
Handy set of instructions. Protector went on without any problems. I used a credit card as suggested to get rid of the air bubbles, which worked out very very well. This installation method is much much easier (and safer?) than Zagg, and similar to other adhesive-type protectors.
Fit:
The protector is cut slightly smaller than the size of the glass. My alignment was spot on, so I don't have any air bubbles around the edges, but there is probably a 1mm (or less) gap around the outside of the protector, which in my opinion is the perfect fit. The cutout for the front camera also is perfect.
Feel:
The protector offers minor friction for fingers. Initially my hands were very clean from the application process, and therefore were not leaving any finger prints. I have since used the TF for a few days, and even let a baby with greasy hands play with it, and the fingerprints/smudges were a minimum. In summary: the protector feels VERY GOOD and appears to cut down fingerprints like crazy. For me, this protector is better than just the glass, and much much better than the protector I had before (I had some 3 for $10 ebay style protector.. it was garbage). This protector is on par with Zagg protectors and their lack of fingerprints (for those who have used them).
Look:
Its hard to tell that there's even a protector on except for a few pieces of dust. Glare is reduced, colors don't seem to be affected. The protector I had before this one was much worse for letting the true colors through. Everything was faded and coarsened (dunno how to best describe that, but it looked bad). All in all, this one looks as good as no protector, with added benefit of reduced glare and minimal fingerprints.
Overall:
Most of my protector experience is with Zagg protectors; on a Nook Color, galaxy s and iPhone. I didn't want to have to fight with putting a Zagg on for a screen the size of the TF, so I have been looking for alternatives. If this protector is competitively priced then imo its one of the better ones for the TF. I once tried a skinomi for a G-tablet, and that thing was a complete waste of money.
Pending price, would get another one of these.
Thanks OP for the protector.
Keep us updated on their availability (I'll probably get another one).
Another question: would it be difficult to make one to fit a G-Tablet?
Cheers.
Ok I've finally received mine. Unfortunately the the package must have gotten folded during transit and it now has creases. I'll make do and will post a tutorial next upcoming weekend. Hopefully the crease is not permanent.
Hi guys,
I've never bought one before, so any suggestions as far as quality goes?
There are a number that emphasize this military grade nonsense, is that an actual indicator of quality or a bait tactic?
Thanks in advance.
I bought the Sony one for mine, it was really quite expensive (£25.99 at my local Sony Centre), but it is a decent anti-glare one.
Trouble with some anti-glare protectors is that they make whites all spicily, but the Sony one doesn't. It does a good job of blocking reflections, although its not fantastic at stopping finger prints.
mhunt407 said:
I bought the Sony one for mine, it was really quite expensive (£25.99 at my local Sony Centre), but it is a decent anti-glare one.
Trouble with some anti-glare protectors is that they make whites all spicily, but the Sony one doesn't. It does a good job of blocking reflections, although its not fantastic at stopping finger prints.
Click to expand...
Click to collapse
Could you please share some photos?
I have to choose between Sony original and Brando Ultraclear (been using them on all equipement so far).
I have never been a fan of matt screen protectors, but I can see that the Sony one gets really good reviews (though I'm not sure if anti-glare in this case means that it has matt finish)
I am using the sony matt one. Pretty good but seems to take away the beauty of the screen. Thinkin of trying a clear one.
Sent from my GT-N7000 using XDA App
mhunt407 said:
I bought the Sony one for mine, it was really quite expensive (£25.99 at my local Sony Centre), but it is a decent anti-glare one.
Trouble with some anti-glare protectors is that they make whites all spicily, but the Sony one doesn't. It does a good job of blocking reflections, although its not fantastic at stopping finger prints.
Click to expand...
Click to collapse
ndrookua said:
I am using the sony matt one. Pretty good but seems to take away the beauty of the screen. Thinkin of trying a clear one.
Click to expand...
Click to collapse
+1 for the idea of anyone posting photos in both low/high light settings to get a better idea of how it looks when applied. Thanks in advance.
I don't have photos (yet), but I'll second the Sony one. I got it off amazon when my zagg protector was clearly too big for the screen and overlapped onto the sides - looked awful, plus it was all orange peely. The Sony one is perfect. I don't mind the matte finish, it keeps the glare down.
I finally got the sony one. I've taken some photos, will post them tomorrow (not the DSRL quality though, too lazy for that - but I think anyone interested will get the picture).
Overall I think it was a good buy - Sony protector is cheaper than Brando Ultraclear (not by much, but still cheaper) and it does make the device somewhat more resistant to fingerprints. I wouldn't exactly say it's matt - I'd rather describe it as semiglossy.
Anyway, I hope that it will be at least as durable as Brando (had them on Kaiser, Diamond, X10mini, HD2 - and never ever even a single scratch).
Interesting results here.
I bought the official one with my Tablet, and I don't find it very good. The anti-glare is brilliant, and it protects the screen well, but it also shows up fingerprints really badly and tends to occasionally interfere with touch sensitivity on my device. YMMV, of course.
Photos
There's not much sun right now in Warsaw so I tried to capture flash flare.
I have to admit that I had no problems with touchscreen sensitivity, and IMHO there is waaaaay less fingerprints than without the screen protector - so yes, YMMV
I use a 3M vikuiti screen protector. it's crystal clear, easy to put on, perfect in size and haptics... not cheap though
+1 for sony.
looks fine to me, and REALLY cuts down the glare. I had a side by side comparison in shop with two display units (one with one without) and difference was night and day.
mhunt407 said:
I bought the Sony one for mine, it was really quite expensive (£25.99 at my local Sony Centre), but it is a decent anti-glare one.
Trouble with some anti-glare protectors is that they make whites all spicily, but the Sony one doesn't. It does a good job of blocking reflections, although its not fantastic at stopping finger prints.
Click to expand...
Click to collapse
I agree with you but i took away some of the beauty of the screen but them i guess you get used to it after sometime.
I've always used the matt protectors. I know it cuts down a bit on the screen quality, but I use mine too much for reading.
One of my friends who also has a Sony Tablet S had dropped it a while ago onto the corner of a cinder block. The tablet had the Sony matt protector on it and it appeared that the cinderblock had not only gone through that, but also taken a little chunk out of the screen itself. It wasn't until very recently that we discovered that the tablet had the factory applied screen protector on it and once we peeled it off, the screen itself was perfect. While I have no dobut the matt screen protector helped, that factory applied protector can take a helluva beating it would seem.
I'm actually amazed at how well the actual screen stands up to fingerprints. The factory applied protector and the matt protector are both magnets for fingerprints, but the actual screen itself barely collects any when swiping. I'm now weighing my options for what to do because I now have the factory applied screen protector plus the matt protector on my tablet. I'd love to find a screen protector that minimizes or eliminates fingerprints... any suggestions? While I do like how the matt protector diffuses light sources, I think I could live with a shinier screen so long as it wasn't coated in fingerprints
Armorsuit screen protectors
Has anyone used armor screen protector. Im tablet is arriving soon and I dont want to scratch the screen.
Lawrenceco said:
Has anyone used armor screen protector. Im tablet is arriving soon and I dont want to scratch the screen.
Click to expand...
Click to collapse
I have had an Armor on now for a couple days. If you follow instructions (watch youtube video) it goes on really well. Bit difficult to perfectly align with fluid present. Mine came out with no bubbles. Lots less fingerprints than out of box screen. Somewhat less glare. However finger sliding is not as smooth as stock. I have a Realook on my phone and it is smoother. Also have a matt screen protector on son's ipod and it has nicest finger slide.
I purchased, "HHI Sony Tablet S1 Anti-Fingerprint, Anti-Glare, Matte Finishing Screen Protector", I'm happy with it.
Wanted to post up in this thread to keep it alive. Thanks everyone for all the great info.
Im shopping for a screen protector now because im afraid to take it out of the house without one, any more input is greatly appreciated!
Well I'm kinda forced to withdraw my recommendation for Sony matt screen protector. After a while (not long, as you can see from the date of my last post in this thread) of frequent tablet usage the matt finish started to wear off.
There are places that you're touching more often and this results in polishing the matt finish of the protector.
Right now it looks matte with polished finger tracks here and there.
Therefore I'd rather recommend Brando one - its glossy and it will stay glossy...
I got these LINK
Really good, nice feel to them.. like all matte protectors they take some of the sharpness off the screen image, but for me it's worth it.
I'll post up a review and some photos of both when I get them. Maybe this'll help some of you in making a decision.
I grabbed the crystal clear pair as well as the "HD fingerprint reducing" pair.
Thanks. I bought the HD fingerprint reducing one, but I'm not terribly impressed with the fingerprint reduction. It looks clear, though. It is a bit "stickier" than other Seidio screen protectors I've used in the past, but still quite usable. I prefer the slick feeling screen protectors.
wvufan said:
Thanks. I bought the HD fingerprint reducing one, but I'm not terribly impressed with the fingerprint reduction. It looks clear, though. It is a bit "stickier" than other Seidio screen protectors I've used in the past, but still quite usable. I prefer the slick feeling screen protectors.
Click to expand...
Click to collapse
Pretty spot on with my feelings.
It's DEFINITELY less sticky than no screen protector, and definitely less sticky than the standard high gloss screen protectors, but it's nowhere near as glide-able as the full matte finish ones.
I'm happy with this compromise, the fingerprints never bothered me too terribly much, but the stickiness of it makes swype a lot more difficult to use effectively. In the future I may try to use a full matte finish one.
The static cling protectors though, NO ROOM FOR ERROR. If you have to lift it up and replace it it's nearly impossible to keep it clean. Do it in your bathroom, run your shower hot and get it nice and humid (helps keep dust down)
The case is nice, I didn't bother taking any pictures because there's really nothing superbly special about either.