Noob question.
Installing CM7 with CWM and ROM Manager, I'm getting can't mount /emmc
using internal SD with "the hard method", rooted with SOC
do i have to partition the SD card?
Dont flash CWM with ROM manager...use Odin to flash CWM kernel (http://forum.xda-developers.com/showthread.php?t=1285823). Also, dont use internal SD option, just go to install from SD in CWM and find the file...I had issues installing CM7 so let me know how it goes for you.
What the reply said. I initially had troubles trying to install from my SD card, so I just used root on my internal SD card. I flashed CM7 from CWM rather than using ROMManager, and ended up having my phone hang at boot. After some research, I discovered there's a glitch where the flash doesn't work correctly, so you actually have to flash CM7, and then flash it again right afterwards. Works like a charm for me now.
Hope this helps!
thanks for the replies both of you!
i did get CWM flashed ok...v5.0.2.3
when i'm in CWM, i disable signature checking then install from zip from internal sdcard and i get
E:Can't mount /emmc/
andyjh122 said:
thanks for the replies both of you!
i did get CWM flashed ok...v5.0.2.3
when i'm in CWM, i disable signature checking then install from zip from internal sdcard and i get
E:Can't mount /emmc/
Click to expand...
Click to collapse
I think internal and external SD card are switched somewhere in CWM.
thanks! how do i fix that?
ok, yes Entropy you were right, the internal sdcard gives the /emmc error, the zip from sdcard works, and cm-galaxys2-full-75.zip starts installing then give the following
asset failed: getprop....
E:Error in /sdcard/cm_galaxys2_full-75.zip
(Status 7)
i also tried toggle script asserts
i figured it out, it was the galaxys2 nightlies from rommanager, not the galaxys2att, trying that now...
I don't think the euro GS2 nightlies work with ATT GS2, I could be mistaken though.
Sent from my SAMSUNG-SGH-I777 using XDA App
Thanks dan40hands,
I got it working with the ROM posted in Dev...
Doesn't look like the euro nightlies work...
Andrew
Use this one http://www.multiupload.com/73J3G4C1CV
1. Boot into CWM
2. Nandroid back-up
3. Wipe data & cache
4. Choose install zip from SD card
5. Select the file downloaded above and install
6. Repeat step 4 & 5
7. Reboot and Enjoy
Why would you have to do 4 and 5 twice. Ie install it twice?
Cryptik! said:
Why would you have to do 4 and 5 twice. Ie install it twice?
Click to expand...
Click to collapse
Oddity with Cyanogenmod in regard to coming from Samsung-derived ROMs, I think involving filesystem formatting. It was the same on the Infuse. Once you're on CM7, you'll only have to do updates once.
Sent from my GT-P7510 using Tapatalk
Related
Good afternoon,
I am having a big problem with my white Samsung Galaxy I9100 S2. I haven't sd card, but my internal memory is 11.5 GB. So I would like to install CWM. When I root via CF-root I have CWM 4. Everything is fine and I can to install zip via recovery boot.
But when I flash other kernel with CWM 5 (with blue text) I am getting an error when I try to install zip via recovery boot. Error says that E:can't mount /sdcard/.
So where is the problem? I have tried everything: about 10 different kernels, different roms, format internal memory, use ROM manager and so on. When the CWM is 5 it doesn't work, I get an error. But when the CWM is 4 everything is fine.
I am waiting your answers.
Thank you in advance!
Regards,
MySelf
Still waiting your answers..
So basicly if you use CF-root everything is fine. Then what is the problem? Where did you get CWM 5 from?
The problem is that the CWM5 doesn't work. Read my first post.
CWM5 I got with a kernel from xda forum.
Again: the problem is that if I have CWM5 I'm getting error which is saying that E:can't mount /sdcard/ and I can't install zip in recovery mode.
Regards,
MySelf
Yes I can understand that. But why do you need CMW5?
If it comes with an other rom, I then can understand that you have no choice. But if CWM4 works, then there is no point in using CWM5.
Choose internal sdcard, not sdcard.
Lennyz1988 said:
Yes I can understand that. But why do you need CMW5?
If it comes with an other rom, I then can understand that you have no choice. But if CWM4 works, then there is no point in using CWM5.
Click to expand...
Click to collapse
It comes with other rom and kernels. I would like to use other rom (not SGS2 stock) with other kernels and I can't, because I am getting error.
oinkylicious said:
Choose internal sdcard, not sdcard.
Click to expand...
Click to collapse
How to choose it? It is set by default I think, because I can't find anywhere where I could choose CWM usage internal sdcard, not sdcard.
Regards,
MySelf
MySelfas said:
How to choose it? It is set by default I think, because I can't find anywhere where I could choose CWM usage internal sdcard, not sdcard.
Click to expand...
Click to collapse
In newer versions of CWM recovery, (such as 5.0.2.7 in Siyah kernel) after you select an option like "install zip from sdcard", there should be multiple options:
choose zip from sdcard
apply /sdcard/update.zip
toggle script asserts
choose zip from internal sdcard
On a stock ROM "from sdcard" refers to /sdcard/external_sd (i.e. a physical microSD) and "from internal sdcard" refers to /sdcard (i.e. internal storage).
Before installing zip try this:
go to mounts and storage
mount data (thats mean change it from mount /data to unmount /data)
and so on for system.
then install your zip file.
oinkylicious said:
In newer versions of CWM recovery, (such as 5.0.2.7 in Siyah kernel) after you select an option like "install zip from sdcard", there should be multiple options:
choose zip from sdcard
apply /sdcard/update.zip
toggle script asserts
choose zip from internal sdcard
On a stock ROM "from sdcard" refers to /sdcard/external_sd (i.e. a physical microSD) and "from internal sdcard" refers to /sdcard (i.e. internal storage).
Click to expand...
Click to collapse
Super! Thank you very much. I'm so stupid cause I didn't see that option in menu Thank you again!
Regards,
MySelf
While trying to install a ROM from my SD card with CWM I am getting the message "E:Can't mount SD card" I was able to move it internal and install the ROM but I'm curious why I couldn't do the same the SD card. The card does seem to be mounted correctly because I can go to ES Explorer and see the content with no problem. It only seems to be CWM Recovery that can't see it.
rwischer said:
While trying to install a ROM from my SD card with CWM I am getting the message "E:Can't mount SD card"
Click to expand...
Click to collapse
when i was watching the utube videos ( of Albert ? ) . . i remember he had to 'pop the card out and back in again', and then issue the 'read sd card' command once more .... to get it to cooperate . . i am sure i remember that. did you watch the video ?
If you are "rebooting" into recovery, the sd card will often not mount. Rebooting into Android also seems to have this problem. Simply removing the card and putting it back in will solve it for Android. I'm not sure about clockworkmod. I generally just power off and then manually boot into recovery.
I popped and put back in the SD card and now CWM recognizes. However I'm still having issues.
If I load the ROM NT_stock_1.4.0_Ribbon_Root_v2 (from the lavero.burgos thread) after it says that the install is complete I see this.
E:Can't mount /cache/recovery/log
E:Can't open /cache/recovery/log
E:Can't mount /cache/recovery/last_log
E:Can't open /cache/recovery/last_log
If I load the 1.4.0 stock ROM CWMrestore_1_4_0__plus_NTV16gbV4_6 then as soon as it says Installing update... I get
Installation Aborted
Something is amiss with my CWM
Which model do you have?
Sent from my Xoom using Tapatalk
It's the 16GB Nook Tablet
Well the ribbon rom shouldn't be seeing that error. You're installing the zip file correct? Maybe download it again. Try another rom like cm7 of cm9 and see what happens.
As for the cwm restore rom, that is not a flashable zip. You need to extract the downloaded file, place it at /clockworkmod/backup/ (on internal or external)and then restore it.
Sent from my Xoom using Tapatalk
Cubanluke88 said:
Well the ribbon rom shouldn't be seeing that error. You're installing the zip file correct? Maybe download it again. Try another rom like cm7 of cm9 and see what happens.
As for the cwm restore rom, that is not a flashable zip. You need to extract the downloaded file, place it at /clockworkmod/backup/ (on internal or external)and then restore it.
Sent from my Xoom using Tapatalk
Click to expand...
Click to collapse
With the ribbon ROM I tried to take it to a place with free WiFi (since the error with not being able to get past the B&N registration due to not being able to connect to my WiFi) and get a different error. It sees the WiFi and when I click to registrator it bails with a message at the bottom that says "B-bind error." So I came home and again downloaded the other ROM (the 1.4.0 called CWMrestore_1_4_0__plus_NTV16gbV4_6) and still get the same error with that one. So I guess my next play is to try a third a third ROM but I'm not too confident that will work either. I've cleared the Dalvik cache. Should I also try clearing any other cache? I'm afraid I may clear out something I need and already kind of have myself in deep enough.
Last resort would be to reimage from an SD card but I feel like I'm so close and there must be something simple to get me over the hump.
How are you trying to install the cwm recovery rom?
Sent from my Xoom using Tapatalk
The ROM was installed by putting the zip in the root of my SD card, going into the CWM menu and using the install zip from sdcard option. I also cleared out the Dalvik cache as rcommended.
The recovery wasn't from a ROM but rather from a backup I did before trying the ROM install. It didn't work for whatever reason.
I've since punted (reimaged via SD card, rerooted and backed up again). The ROM failed again. Same thing where I can't get past the B&N registration page because beacuse my WiFi doesn't connect (Connted, testing). I did notice this time a b-bind error.
The one thing different is that my backup was successful this time as I can restore to the rooted 1.4.0 mode (WiFi works). So I don't need to start from scratch again but still can't seem to get a ROM installed.
I don't know if anyone asked about this matter but I'm having this problem as of today. I'm on epinter's CM10 and I tried ATRICS by thehope using CWM. I didn't like the rom so I restored back to epinter's CM10. I tried to install CM7 or any GB and it went okay but when reboot my rom is still in CM10. I also flashed MIUI but failed to flash and said assert failed...status 7. I don't know what to do anymore...I tried flashing .sdf files but in no luck. Can someone help me please.
Copy CM7 zip in internal memory.
WIPE / FACTORY RESET
FORMAT /system
Wipe Dalvik Cache
Pull Out the SdCard form Slot Sdcard and then flash with CWM.
Do you try?
xyzwqt said:
Copy CM7 zip in internal memory.
WIPE / FACTORY RESET
FORMAT /system
Wipe Dalvik Cache
Pull Out the SdCard form Slot Sdcard and then flash with CWM.
Do you try?
Click to expand...
Click to collapse
I did the factory reset but when I format /system it froze
*copied CM7 in internal memory is gone when I reboot the phone to flash with CWM.
Niconeeks said:
I did the factory reset but when I format /system it froze
*copied CM7 in internal memory is gone when I reboot the phone to flash with CWM.
Click to expand...
Click to collapse
strange
by internal sdcard I mean 10Gb for data, not to the memory of the root system.
Install an official rom with rsdlite??
xyzwqt said:
strange
by internal sdcard I mean 10Gb for data, not to the memory of the root system.
Install an official rom with rsdlite??
Click to expand...
Click to collapse
Tried installing official rom through rsdlite and its still the same.
I tried to flash dark side rom and clockworkmod displayed this:
E:Can't open /cache/recovery/log
Niconeeks said:
Tried installing official rom through rsdlite and its still the same.
I tried to flash dark side rom and clockworkmod displayed this:
E:Can't open /cache/recovery/log
Click to expand...
Click to collapse
E:Can't open /cache/recovery/log[/QUOTE] Try run FIX PERMISSIONS.
After installing the official rom RSDLite, JB starts (CM10)??
The process is completed???
(SDcard not inserted in the atrix.)
NO WAY!!
Which version of recovery you have?
xyzwqt said:
E:Can't open /cache/recovery/log
Click to expand...
Click to collapse
Try run FIX PERMISSIONS.
After installing the official rom RSDLite, JB starts (CM10)??
The process is completed???
(SDcard not inserted in the atrix.)
NO WAY!!
Which version of recovery you have?[/QUOTE]
I also try the fix permission and it went smoothly.
Yes, I'm telling the truth, I'm using CWM recovery 5.0.2.0? I think that's the latest for atrix 4g.
I also try the fix permission and it went smoothly.
Yes, I'm telling the truth, I'm using CWM recovery 5.0.2.0? I think that's the latest for atrix 4g.[/QUOTE]
I have 5.0.2.7
http://forum.xda-developers.com/showthread.php?t=1204500
xyzwqt said:
I also try the fix permission and it went smoothly.
Yes, I'm telling the truth, I'm using CWM recovery 5.0.2.0? I think that's the latest for atrix 4g.
Click to expand...
Click to collapse
I have 5.0.2.7
http://forum.xda-developers.com/showthread.php?t=1204500[/QUOTE]
Tried the link didn't work. flashed through cmd, followed all instructions showed this
Flashing MBR to device
Flashing Stormgr partition: SOS
reboot the phone and still has the same CWM recovery version 5.0.2.0
Once i tried to flash miui jelly rom and got that status 7. I managed to flash it after formatting everything except sdcard and internal memory.
Sent from my MB860 using xda premium
ryujitotaiga said:
Once i tried to flash miui jelly rom and got that status 7. I managed to flash it after formatting everything except sdcard and internal memory.
Sent from my MB860 using xda premium
Click to expand...
Click to collapse
In other threads see that the status 7 problem is due to the security of the boot.img
http://forum.xda-developers.com/showthread.php?t=1841923
Did you try to root the phone again?
Hey folks!
I've had JellyBAM v6.5 running on my S3 i9300 and wanted to flash to 6.6, but after a one time used DarkyRom (****) i had a folder called Darky that i couldn't delete. So i thought i delete everything, data, cache, and format it.
But right after i pressed format i realised that it was not that smart of me and now i got an phone i can not boot because there is nothing on it.. :/
If i go to mounts and storage I see:
unmount /efs
unmount /cache
unmount /system
unmount /data
unmount /preload
mount /sdcard
unmount /external_sd
So everything is mounted exept the SD Card.. :/
If I go to the "Install .Zip from SD Card" i can go on the internal storage and see only the folder Clockworkmods\ so i can acces it.
But if I try to install JellyBAM.zip i get this message:
--Installing: /external_sd/rom.zip
Finding update package...
Verifying update package...
E:failed to verify whole-file signature
E:signature verification failed
Than i get a other option menu on the top and it says:
Install Untrusted Package?
THIS CAN NOT BE UNDONE.
-No
-Yes - Install untrusted zip
-++++Go Back++++
And if i click Yes- Install untrusted zip, then I get:
Installing Update...
Installation aborted.
What can i do now?
Thanks!
ODIN... Flash a stock rom and then re-root...
You've cleaned out everything on your internal storage anyway, there should be no pics or anything there if you formatted it. What have you got to loose?
ultramag69 said:
ODIN... Flash a stock rom and then re-root...
You've cleaned out everything on your internal storage anyway, there should be no pics or anything there if you formatted it. What have you got to loose?
Click to expand...
Click to collapse
Nothing to lose, i got everything stored on dropbox and google account anyway..
But i didnt want to flash a stock rom.. is there no other way? Because I want a clean as possible install..
Install stock rom... the zip file you have downloaded seems to be broken... so just download the file again and follow the OP instructions.
If there are non just ask how to here
Sent from my GT-I9300 using xda app-developers app
Kaantjee said:
Nothing to lose, i got everything stored on dropbox and google account anyway..
But i didnt want to flash a stock rom.. is there no other way? Because I want a clean as possible install..
Click to expand...
Click to collapse
Put rom on external sd card .
Flash CWM recovery and install rom from recovery may work .
Otherwise build the rom you want into the correct format for Odin flash .
jje
JJEgan said:
Put rom on external sd card .
Flash CWM recovery and install rom from recovery may work .
Otherwise build the rom you want into the correct format for Odin flash .
jje
Click to expand...
Click to collapse
I put Jellybam (this: https://get.jellybam.com/?device=i9300) on my Ext. SD card, but like I described above in the first post i get an Installation Aborted message.
Kaantjee said:
Nothing to lose, i got everything stored on dropbox and google account anyway..
But i didnt want to flash a stock rom.. is there no other way? Because I want a clean as possible install..
Click to expand...
Click to collapse
If you want a clean install then format and flash stock Rom,reroot, and flash recovery and away you go, doesn't take long
slaphead20 said:
If you want a clean install then format and flash stock Rom,reroot, and flash recovery and away you go, doesn't take long
Click to expand...
Click to collapse
Ok, i've done what you said and have installed JellyBAM again. But now i've lost Clockworkmod Recovery Touch. I have downloaded the recovery from http://www.clockworkmod.com/rommanager but it is an .img file, how can i flash that..?
Thank you..
Kaantjee said:
Ok, i've done what you said and have installed JellyBAM again. But now i've lost Clockworkmod Recovery Touch. I have downloaded the recovery from http://www.clockworkmod.com/rommanager but it is an .img file, how can i flash that..?
Thank you..
Click to expand...
Click to collapse
Flash recovery .img with mobile Odin
You can get Mobile Odin Lite (free) from here
Sent from my GT-I9305 using xda app-developers app
You guys are amazing, thank you all for your help.
The last time I did this was a while back so I didnt know anymore what to do..
Kaantjee said:
You guys are amazing, thank you all for your help.
The last time I did this was a while back so I didnt know anymore what to do..
Click to expand...
Click to collapse
Yes, we are, and we continue to be amazing when you tickle the thanks button
slaphead20 said:
Yes, we are, and we continue to be amazing when you tickle the thanks button
Click to expand...
Click to collapse
hehehe.. here you go:good:
Hi. I am trying to flash Cyanfox 2.0.2 for my s2. The problem I'm having is that I can't seem to find my zips. I've tried putting the rom and the gapps zip in both the /sdcard0 (internal memory), /sdcard1 (ext. SD card) as well as in the root folder of my phone. The only folders showing up in CWM when choosing "Install zip from sdcard" are 0 and obb. It looks like I have no option to choose between /sdcard0 or /sdcard1 inside CWM.
Can anyone enlighten me?
jhsevs said:
Hi. I am trying to flash Cyanfox 2.0.2 for my s2. The problem I'm having is that I can't seem to find my zips. I've tried putting the rom and the gapps zip in both the /sdcard0 (internal memory), /sdcard1 (ext. SD card) as well as in the root folder of my phone. The only folders showing up in CWM when choosing "Install zip from sdcard" are 0 and obb. It looks like I have no option to choose between /sdcard0 or /sdcard1 inside CWM.
Can anyone enlighten me?
Click to expand...
Click to collapse
what is the version of your cwm ???
6.0.4.4, is this version a bit too old for me?
jhsevs said:
6.0.4.4, am I running a too old version?
Click to expand...
Click to collapse
no its not old
the only help i can offer is this CWM that i use on my S2 without problems
https://drive.google.com/file/d/0B6UEx-n2JnSJcnNwM2ZZbVdORTA/edit?usp=sharing
good luck
Adelm2013x said:
no its not old
the only help i can offer is this CWM that i use on my S2 without problems
https://drive.google.com/file/d/0B6UEx-n2JnSJcnNwM2ZZbVdORTA/edit?usp=sharing
good luck
Click to expand...
Click to collapse
Thanks, but I don't wanna bother with updating CWM yet, if I can find another solution first. I haven't done done an update to CWM Recovery before, so I am clueless about that. Anyway, I found out today that one of the data pins inside the micro usb is broken, so I can't transfer using ADB.
Edit: I thought I finally had got it. I downloaded ROM Manager. I haven't done that before since I've had some problems using wi-fi on the unofficial CM11 ver I had (one of the reasons for why I'm updating). I selected "Install rom from sdcard" in rom manager, navigated to the rom, and chose to install. ROM Manager booted into recovery and showed the following error:
E:Can't open /data/media/CyanFox2.0.2.i9100.zip
(No such file or directory)
Click to expand...
Click to collapse
Which doesn't lead me anywhere, since it's basically the same problem that I had in the first place.