Hi, just wondering can i use older csc with new firmware while flashing to my phone. Can it create some issues. I'll be flashing new KI4 firmware available to europe only while I need Indian CSC.
If CSC works now then its ok its only local network settings and rarely changes .
jje
Related
When i download new firmware from Samfirmware.com, there is only 1 file..XXXXHOMEXXX.tar
Should I load it in bootloader section or in PDA section?
Iam using ODIN3 1.85
Main reason is that after upgrading it in bootloader section it still does say my CSC is branded H3G so iam wonering if it was upgraded at all.
If its only 1 file then put it in the PDA section...CSC contains the software packages specific to that region, carrier branding and also APN settings for data connection, MMS etc for your service provider.
thanks! so that means if there is only one file it will update only PDA section or is the CSC included within this one file?
The file itself is quite big so thats why iam wondering if all (PDA,PHONE,CSC) is included in one file...
i did the flashing again.. this time is KERNEL version upgraded as well..so does it mean that kernel is CSC?
Its a complete file of all parts flash as per instructions on Samfirmware always .
CSC Kernel Modem Phone etc .
CSC is not a Kernel .
jje
hi all where can i get the scs firmware id like to add the vodafone one or is there a file i can add to have all scs profiles on the phone i just debranded to xeu firmware so i dont want to add new firmware
thanks matt
how do i add the vodafone scs at the moment it just says xeu really need some help
scs or csc?
sorry yes csc i used this http://www.multiupload.com/GQXU786O28 to debrand but i only have xeu csc id like to add some more if i can
mattft86 said:
sorry yes csc i used this http://www.multiupload.com/GQXU786O28 to debrand but i only have xeu csc id like to add some more if i can
Click to expand...
Click to collapse
Thought so.A csc is not carrier based its country based.For example Im in Spain and in use FOP on any network,KOR is korea standard and so on.You can flash a firmware with a multi-csc if that firmware is official in those countries.If not you get the csc for the valid country only.If you go to the link below you will see a list of all official firmwares.If you go even further below to the "FRANKENSTEIN SECTION" you will see more firmwares and a list of CSCs.You can flash a Frankenstein FW,factory reset your phone then if you want flash any of the CSCs you see there and do another factory reset to complete it.In my experience its not a good idea to flash another CSC to an official FW so thats why its best to choose a Frankenstein one which are just the same,just pimped-up by XDAs intratech.The other wat is to flash a custom ROM that has a multi CSC pack built in.
http://forum.xda-developers.com/showthread.php?t=1075278
http://forum.xda-developers.com/showthread.php?t=1290468
thats what i thought so i used the firmware in the link above i then did a factory reset so kies would see it as if i done it vis kies. Kies then checked for an update and none was found but then when i went to change the csc i only had xeu.
Dose anyone know when/if 2.3.5 for xeu will be out i dont want to flash again
because i just got kies to work with the firmware im useing
Kies wont work from the CSC you on your phone.It will search for the latest update depending on the product code of your phone and if you flash a non-official firmware then it will say that the firmware that you have cannot be updated.If you want the official 2.3.5 then you need a factory unlocked SGS2 as they are usually the first to get updates and dont flash it with a non-oficiall FW.Flash a custom ROM if you wantIm on KI4-KK5 2.3.6 cos I have a custom ROM
http://forum.xda-developers.com/showthread.php?t=1290468
it is unlocked to all networks it unlocked when i flashed it with 2.3.4
Kies reads a specific registry key to get the phone details like
I9000ADJP6/I9000O2UJP3/I9000ADJP3/I9000ADJP6
If Kies tries to match firmware to the above codes it would fail .
As per
http://forum.xda-developers.com/showthread.php?t=1089874&highlight=hidswver
the Check FUS post allows direct downloads
or spoofFW may allow you to download a firmware from Kies by spoofing codes .
jje
mines
HIDSWVER=I9100XWKI4_I9100XEUKH2_I9100XXKI1_I9100XWKI4
mattft86 said:
it is unlocked to all networks it unlocked when i flashed it with 2.3.4
Click to expand...
Click to collapse
Its just that you said you de-branded it.I took that as a locked phone that you have unlocked with a flash but that wont change its product code.
ah im with you now how can i unlock it so the code can change?
it was on t-mobile 2.3.5 is out now for t-mobile but kies is saying im up to date not sure now how to get get 2.3.5 but so kies still works
on my mums galaxy s her sales code was cpw i changed it by *#272*IEMI#
changed to xeu it then had an update to 2.3.5
CPW CSC is the best for the UK as it covers more networks .
jje
i did try CPW but still no update and this one http://www.multiupload.com/QROGHPRZVK made my anti virus pop up when my mums one was set to CPW it would not update till it was set to XEU also CPW is still on Android 2.3.4 Gingerbread http://devsrom4android.blogspot.com/2011/10/samsung-galaxy-s2-firmware-updates-via.html
same as XEU
mattft86 said:
i did try CPW but still no update and this one http://www.multiupload.com/QROGHPRZVK made my anti virus pop up when my mums one was set to CPW it would not update till it was set to XEU also CPW is still on Android 2.3.4 Gingerbread http://devsrom4android.blogspot.com/2011/10/samsung-galaxy-s2-firmware-updates-via.html
same as XEU
Click to expand...
Click to collapse
Dont worry to much about the antivirus coming up.Thats just the way your antivirus or firewalls is set.Happens every now and then but its not a virus so just download it anyway.Happened to me a few times,mostly when the file is an md5 file and not a tar file(both go in PDA in Odin too so no worries there).As for Kies I guess its a matter of flashing a compatable firmware that Kies will recognize for the update as normally it wont recognize non official ones.Or a custom ROM if you cant wait.
CPW CSC is the best for UK networks as it covers more networks .
It has nothing to do with updates its only the CSC file that contains multiple network configurations more than the XEU csc does .
CSC is not actually required to use the phone .
SpoofFW might be worth a look from the market .
jje
There is already a thread about this.
http://forum.xda-developers.com/showthread.php?t=1075278
i saw here http://droidangel.blogspot.com/2011/12/android-236-firmware-i9100xxkl1for.html that 2.3.6 open is out since the 8th but iv had no update
well i flashed it with CPW 2.3.3 kies updated it to 2.3.4 dont matter what network i use
Hello
I have unbranded Galaxy S II, with CSC "XEU".
Latest upgrade through Kies I had at September, and now firmware is:
Europe XEU - I9100XWKI4 / I9100XEUKH2 (Android 2.3.4 Gingerbread)
Since than no more updates were available in Kies...
Does anybody know if this will change?
I see Europe firmwares for CSC "OXA", but for this I should probably first use Odin to change firmware.
What is difference between "XEU" and "OXA" in general?
--
Przem
prkrol said:
Hello
I have unbranded Galaxy S II, with CSC "XEU".
Latest upgrade through Kies I had at September, and now firmware is:
Europe XEU - I9100XWKI4 / I9100XEUKH2 (Android 2.3.4 Gingerbread)
Since than no more updates were available in Kies...
Does anybody know if this will change?
You get updates when you get them is the simple answer .
I see Europe firmwares for CSC "OXA", but for this I should probably first use Odin to change firmware.
YES
What is difference between "XEU" and "OXA" in general?
--
XEU = UK
OXA = Poland
http://forum.xda-developers.com/showthread.php?t=1075278
Questions = Q&A section .
jje
Click to expand...
Click to collapse
They are just region codes.
CSC's just have APN settings and maybe some operator specific apps, any region specific rom will work anywhere in the world.
Hi
Is there general CSC for Europe?
If:
"XEU = UK; OXA = Poland"
Than really there is no new update for UK?
2.3.4 is letest Android?
somehow funny
--
Przem
Can someone confirm, that unbranded SGSII from UK has latest Androind 2.3.4?
Nothing I'm complaining about, its really stable and working OK.
But little sorrow there were updates for other CSC...
Btw, how to change CSC when multi-csc is not installed (*#727*IMEI# is displaying XEU only, is not accepting OXA)
--
Przem
prkrol said:
But little sorrow there were updates for other CSC...
CSC is not the update path .Product code is .
Btw, how to change CSC when multi-csc is not installed (*#727*IMEI# is displaying XEU only, is not accepting OXA)
--
Flash a CSC from the stock roms and CSC thread .
CSC IS country specific settings a few files that give local networks details and settings and is not even required for a phone to work .
jje
Click to expand...
Click to collapse
I have a SII which has been imported in to New Zealand, it was 2.3.4, with a SMO CSC
Locally there has just been a 4.0.3 upgrade avaliable, I've downloaded the VNZ (Vodafone NZ) and flashed it with odin.
The upgrade to 4.0.3 went great, but the CSC has remained at SMO, so now Keis is reporting that "your device does not support software upgrading via keis"
PDA: I9100XWLP7
phone:I9100XXLPS
CSC: I9100VNZLP2
I've tried the CSC changes, and this only give me the option of the SMO CSC.
Any idea on how to fix this, I would if possible like to have VNZ as the CSC
Greg
flash ur stock rom,its obivious tht the csc will change wat u expect man...an always hav a efs backd up....
wipe using code, after that if still doesnt change flash againusing odin and wipe again using code.
will work, iv seen ics requires twice flashing for csc fix, GB worked usually with one flash and wipe code
*2767*3855#
Essentially its make your mind up time Stick with Kies and official firmware or use Odin .
This attempt to mix and match does not always work .
jje
Hi, I have flashed my S2 19100 from gingerbread to ICS via odin, when I go to change the CSC code to UK there is only one option which is KOR how can I put more options on my mobile so I can change it to my region. So I'm just wondering if it's possible to add an additional country to the Regional Settings, quite frustratring as Kies see mobile and I can do everythin on it except update firmware, not too bothered anout Kies I just want to know why and the CSC seems to be the only thing left to try - that is changing it...
thanks in Advance.
P
Stock roms and CSC flash via Odin .
http://forum.xda-developers.com/showthread.php?t=1075278
Kies only updates if all codes match firmware on the server use CHECKFUS to download firmware and flash via ODIN .
jje