Hi,
Recently i've updated my SGS2 to the latest via Kies having the below version
Check using *#1234#
PDA: DXKI2
PHONE: DXKI1
CSC: XXKH1
Gingerbread 2.3.3
After that i've downloaded the stock firmware of XXKI3 from Intratech cause i want to use 2.3.5. And flash it via odin. Now when i check my setting, its reflected as the same above.
However when i go to settings, the kernel version change to XXKI3. And still Gingerbread 2.3.3.
I need advise what i did wrongly.
Thanks in advance
Sent from my GT-I9100
It seems that you downloaded and flashed a file that contained only the kernel and not the entire firmware. Their are two download links, one for the full firmware package and one for the stock kernel.
a kernel is different from a firmware.
poch_1421 said:
a kernel is different from a firmware.
Click to expand...
Click to collapse
I think I only flash the kernel. I'm now downloading the full firmware on XXKI3. So just to confirm that I should be flashing the full firmware of XXKI3 in order to get Gingerbread 2.3.5?
Thanks
kenahiro said:
I think I only flash the kernel. I'm now downloading the full firmware on XXKI3. So just to confirm that I should be flashing the full firmware of XXKI3 in order to get Gingerbread 2.3.5?
Thanks
Click to expand...
Click to collapse
Yes.full firmware is something 200+mb and kernel file is only 5+mb.
Be careful what version of ki3 you are going to flash
The original one has the new bootloader and you can not reset the counter with jig
Sent from my GT-I9100 using Tapatalk
How to see whether its the original firmware with the new bootloader?
I got the one from intratech on version XXKI3. Is that the new original?
Sent from my GT-I9100
kenahiro said:
How to see whether its the original firmware with the new bootloader?
I got the one from intratech on version XXKI3. Is that the new original?
Sent from my GT-I9100
Click to expand...
Click to collapse
You need to actually take the time to read the post instead of asking other's to read the post for you .
jje
Related
Hey guys,
I've just updated my Samsung via Kies and it is now running as follows:
Baseband - i9100xxke7
Kernel - i9100xwkg3
Build - Gingerbread xwkg3
This is the Vodafone NZ firmware.
Is there a insecure xwkg3 kernal around? Had a look around the forum, but wasn't able to find one.
Thanks in advance.
You can use the insecure KG1 kernel to root - but you might want to wait until intratech updates the carrier firmware thread with Voda's KG3 so you can flash the KG3 kernel again after rooting.
Anything interesting in there, by the by? I'm on leaked KG6.
EDIT: Looks like it's already uploaded, but Voda's KG3 is still 2.3.3. In that case, any 2.3.3 kernel will do, just flash the stock one back when you're done (Don't use the KG1 kernel, because that's 2.3.4).
Sent from my Transformer TF101 using XDA Premium App
If I flash back the Voda KG3 Kernel, will this still give me root access?
Bhugz said:
If I flash back the Voda KG3 Kernel, will this still give me root access?
Click to expand...
Click to collapse
Not unless Voda include root .
jje
Ok, I'm having trouble finding a insecure kg3 kernel to use that is 2.3.3. Can someone please link me to the correct CF-Root v4.1 that I should be using.
Thanks heaps
Bhugz said:
Hey guys,
I've just updated my Samsung via Kies and it is now running as follows:
Baseband - i9100xxke7
Kernel - i9100xwkg3
Build - Gingerbread xwkg3
This is the Vodafone NZ firmware.
Is there a insecure xwkg3 kernal around? Had a look around the forum, but wasn't able to find one.
Thanks in advance.
Click to expand...
Click to collapse
Noob question... Looking at kies, it tells me:
PDA:KG3
Phone: KE7
CSC: KG1 (VNZ)
When one starts messing around with rooting etc. is it a case of one firmware for all, or can one actually change the Phone firmware, but not the PDA firmware?
I have been researching the net on this and the posts in http://forum.xda-developers.com/showthread.php?t=1075278.
I haven't been able to post in there as I am a new user, but if someone can help me with this, it would be great.
I'm trying to upgrade my firmware to XXKH3 - Android 2.3.4.
My current version is:
PDA: I91000XWKE7
PHONE: I9100XXKE4
CSC: I9100OPSKE4
My Galaxy S II is rooted and it's on the OPTUS network in Australia.
My question is, how should I go about it?
Do I download the XXKH3 Stock Kernel: http://www.multiupload.com/C4DRUIJTLL and place that in PDA and PHONE in Odin?
And for CSC do I get this: Optus OPSKG1 CSC: http://www.multiupload.com/EPWZTIMS1F and place it in CSC?
I want to be able to use the OPTUS network on XXKH3, but without OPTUS bloatware. I'm just not sure which files to get so I can be with OPTUS on an Australian firmware if that makes any sense.
My last question is, would this then wipe my data? Or not?
I appreciate any help on this.
justmiike said:
I have been researching the net on this and the posts in http://forum.xda-developers.com/showthread.php?t=1075278.
I haven't been able to post in there as I am a new user, but if someone can help me with this, it would be great.
I'm trying to upgrade my firmware to XXKH3 - Android 2.3.4.
My current version is:
PDA: I91000XWKE7
PHONE: I9100XXKE4
CSC: I9100OPSKE4
My Galaxy S II is rooted and it's on the OPTUS network in Australia.
Why question is, how should I go about it?
Do I download the XXKH3 Stock Kernel: http://www.multiupload.com/C4DRUIJTLL and place that in PDA and PHONE in Odin?
And for CSC do I get this: Optus OPSKG1 CSC: http://www.multiupload.com/EPWZTIMS1F and place it in CSC?
I want to be able to use the OPTUS network on XXKH3, but without OPTUS bloatware. I'm just not sure which files to get so I can be with OPTUS on an Australian firmware if that makes any sense.
My last question is, would this then wipe my data? Or not?
I appreciate any help on this.
Click to expand...
Click to collapse
you are referring to the right thread. clear instructions are given on that thread.
choose the PDA option.
CSC has nothing to do with what languages the firmware supports and it will not add keyboard language support either.
You don't have to change the kernel or root or unroot to flash a new stock firmware.
You can then flash the kernel of your choice.
If you want the CF-root KH3 kernel. refer this thread
If you want to flash stock KH3 kernel you can also do that.
as far as operator bloatware is concerned search for operator specific bloatware removal scripts which can be executed using Gscript app . or a simpler option would be to freeze or uninstall the bloatware apps using Titanium back up Pro.
Thank you for the fast reply.
So pretty much all I need to do is put the XXKH3 Stock Kernel in the PDA option and that's it. So the OPTUS network will not be affected correct?
Then root it and I'm done?
Thanks again!
justmiike said:
Thank you for the fast reply.
So pretty much all I need to do is put the XXKH3 Stock Kernel in the PDA option and that's it. So the OPTUS network will not be affected correct?
Then root it and I'm done?
Thanks again!
Click to expand...
Click to collapse
Exactly. I did this yesterday.
Sent from my GT-I9100 using Tapatalk
Excellent. Thanks.
I guess my last question is, by doing this, putting the XXKH3 in the PDA option, will this wipe my data?
Should I back up?
Back up apps with Titanium Pro
Sent from my GT-I9100 using Tapatalk
Alright will do. Thanks for all your help guys!
let me know how you get on,am severely tempted to flash new firmware just for a change!
Hm. I just put XXKH3 Stock Kernel in PDA and flashed it but my phone still says Android 2.3.3. I used the CF-root KH3 kernel as well to root it again.
What do I need to do to get it to Android 2.3.4? Do I have to place it in PHONE as well?
The ROM is 2.3.4, just about any ROM in original development is. What you are trying to flash is kernel. Best of luck.
Sent from my GT-I9100 using Tapatalk
justmiike said:
Hm. I just put XXKH3 Stock Kernel in PDA and flashed it but my phone still says Android 2.3.3. I used the CF-root KH3 kernel as well to root it again.
What do I need to do to get it to Android 2.3.4? Do I have to place it in PHONE as well?
Click to expand...
Click to collapse
Er, Kernel is kernel and firmware is firmware. Flashing the kernel won't update the firmware, just the kernel.
Alright I think I understand now.
Downloading the package, which should do it and I guess the stock kernel is used to root/rid yourself of the yellow triangle.
jr866gooner said:
let me know how you get on,am severely tempted to flash new firmware just for a change!
Click to expand...
Click to collapse
It went well, the phone is working great.
My data didn't get wiped.
Follow this thread: http://forum.xda-developers.com/showthread.php?t=1075278.
Download the XXKH3 package.
I also used Titanium to backup my apps just in case and MyBackup Pro for contacts etc. but haven't needed to use it.
After you flash that (if you want to root the phone) go to this page http://forum.xda-developers.com/showthread.php?t=1103399 and get CF-Root-SGS2_XX_OXA_KH3-v4.1-CWM4.zip. Put that in PDA and flash it.
To get rid of the yellow triangle, follow this post http://forum.xda-developers.com/showpost.php?p=14283369&postcount=2.
That's it. Thanks for all your help guys!
ok so lets say I chose new stock firmware to avoid the triangle,then later wanted to be official,could i plug my phone into kies and updatd to official 2.3.4 without problems?
i would like to try oranges firmware without rooting the device and voiding my warranty!
Intratech said:
Er, Kernel is kernel and firmware is firmware. Flashing the kernel won't update the firmware, just the kernel.
Click to expand...
Click to collapse
Understand now, 1 more question my stock rom 2.3.3 it is xwkf1 Singapore version thinking to flash it to the lastest 2.3.4 Europe/ USA rom does it support chinese?
Sent from my GT-I9100 using XDA Premium App
First of all, thanks for reading this post.
I have a I9000 Samsung S2 here in Chile, with Entel Carrier and a 2.3.6 Android version, kernel KK3.
The problem is, I can't find a root KK3 kernel for it.
Also, I couldn't find an answer, if it's possible to use a KK2 or a KK5 instead of it.
Please anyone could solve this questions?
Thanks, once again.
maybe flash yourself a KK5 firmware? then you could go for KK5 cf-root
golcheck said:
maybe flash yourself a KK5 firmware? then you could go for KK5 cf-root
Click to expand...
Click to collapse
So, if I am right, I should install a stock kk5 kernel and then go for the cf-root?
I mean, are they compatible, right?
Rodomiro said:
So, if I am right, I should install a stock kk5 kernel and then go for the cf-root?
I mean, are they compatible, right?
Click to expand...
Click to collapse
flash the whole stock rom (pda, csc, modem, kernel)
I flashed a KJ3 kernel on my KJ4 rom, so you should be OK just flashing the KK2 kernel
Sent from my GT-I9100 using XDA App
mmm thanks....
So, the question now is kk2 or kk5?
Well, I took my chances and tried with KK5... Success!!
I'll post if I find some troubles
Hello everybody,
I'm going to install a new ROM - it was advised to me frankstain XWLA4 ROM - and I still have some question about installing that ROM:
1- which do I install first: the firmware or the kernel? And in Odin, where do I put Kernel?
2-Is it "safe" to install frankstain XWLA4 ROM? Would I have errors on my Samsung Galaxy S2?
3- how can I wipe my device (to clean all Vodafone ES "rubbish")? Should I do the wipe before or after installing the ROM and flashing my device?
4- By installing Stock ROM and CF-root I won't change the kernel right?
Thanks.
yellow simbol is not error. u get it when u put custom rom. but u can move it. chainfire make app for that.
Sent from my GT-I9100 using XDA App
In fact my main question is: which do I install first: the firmware or the kernel? And in Odin, where do I put Kernel?
The others I think I know the answer but this question is essencial so I can start to install the new Firmware.
LA4 is very stable I've been running it for the last two days with no problems. If you flash a CF kernel you will have a different kernel but it will be as close to stock as possible just with a couple of extra features. You can down load the the original firmware/kernel from intratechs thread. All you need to do is flash a frankesten LA4 from intratech, it's all in one so you just use pda in odin.
Sent from my GT-I9100 using Tapatalk
Thanks man but I don't know what's LA4 ROM... and a buddy of our on anoher thread recommended me frankstain XWLA4 ROM and so I would like to install it.
For example, in this case:
"XWLA4
Android 2.3.6
There is no carrier branding
This package has: PDA: XWLA4| Modem/phone: XXKI3| CSC: XEUKH2
Download: http://uploadmirrors.com/download/3V...I9100XEUKH2.7z
XWLA4 Stock Kernel: http://uploadmirrors.com/download/0M..._I9100XWLA4.7z
Password: [email protected]
"
What should I install first? Kernel or the firmware? And where do I put Kernel on Odin?
Thanks.
marcadam said:
LA4 is very stable I've been running it for the last two days with no problems. If you flash a CF kernel you will have a different kernel but it will be as close to stock as possible just with a couple of extra features. You can down load the the original firmware/kernel from intratechs thread. All you need to do is flash a frankesten LA4 from intratech, it's all in one so you just use pda in odin.
Sent from my GT-I9100 using Tapatalk
Click to expand...
Click to collapse
diogogomes11 said:
1- which do I install first: the firmware or the kernel? And in Odin, where do I put Kernel?
Click to expand...
Click to collapse
Most firmwares will have kernels included. Work with that for now.
diogogomes11 said:
2-Is it "safe" to install frankstain XWLA4 ROM? Would I have errors on my Samsung Galaxy S2?
Click to expand...
Click to collapse
Yes. Those "Frankenstein" packages are stock, except Intratech mixed and matched the PDA, CSC, and modems. They just won't get recognized by Kies as a valid updateable firmware because of this though.
diogogomes11 said:
3- how can I wipe my device (to clean all Vodafone ES "rubbish")? Should I do the wipe before or after installing the ROM and flashing my device?
Click to expand...
Click to collapse
Flash an unbranded stock firmware. Post #2 above the Frankenstein firmwares of the same thread. Or the Frankenstein ones. The only difference is the non-Frankenstein ones will probably be recognized by Kies as upgradeable, and the Frankenstein ones will probably not.
diogogomes11 said:
4- By installing Stock ROM and CF-root I won't change the kernel right?
Click to expand...
Click to collapse
Wrong. If you install just stock ROM, yes. CF-Root is a custom kernel, so if you install that, you ARE changing the kernel.
---------- Post added at 02:34 PM ---------- Previous post was at 02:32 PM ----------
diogogomes11 said:
What should I install first? Kernel or the firmware? And where do I put Kernel on Odin?
Click to expand...
Click to collapse
As above, most if not all firmwares come with a kernel. If you want a custom kernel you must flash it AFTER you flash a firmware. Else if you flash a kernel first, then the firmware, then the firmware's kernel will overwrite the kernel you flashed first.
Kernels generally go in the PDA section of Odin.
EDIT: I think I see your confusion. You're wondering about the "stock kernel" link that's right below the firmware link. Right? Well that's there just in case you need it. For example, if you flashed a CF-Root kernel, and wanted to flash the stock kernel back. If you never end up flashing a non-stock kernel, then you won't need it. But I'd download it anyways, just in case you need it later.
diogogomes11 said:
Hello everybody,
I'm going to install a new ROM - it was advised to me frankstain XWLA4 ROM - and I still have some question about installing that ROM:
1- which do I install first: the firmware or the kernel? And in Odin, where do I put Kernel?
2-Is it "safe" to install frankstain XWLA4 ROM? Would I have errors on my Samsung Galaxy S2?
3- how can I wipe my device (to clean all Vodafone ES "rubbish")? Should I do the wipe before or after installing the ROM and flashing my device?
4- By installing Stock ROM and CF-root I won't change the kernel right?
Thanks.
Click to expand...
Click to collapse
1.XWLA4 is 2.3.6 so if you want to install a ROM with this Firmware and you are already on 2.3.6 then you dont need to flash anything.Root and flash the ROM.You need to flash a 2.3.6 firmware if you are on 2.3.5 for example before flashing a XWLA4 ROM.
1A. A kernel goes in PDA in Odin.
2.Its safe to install any ROM as long as you follow the instuctions that the Dev provides.You will have problems if for example you are on,as I already mentioned,2.3.5 and flash a 2.3.6 ROM.Always flash a ROM thats compatable with your Firmware.Frankenstein has firmwares not ROMs.Developers have ROMs.
3.To get rid of carrier apps all you need to do is flash a Firmware or custom ROM.Thats all.After flashing a Firmware its a good idea to do a factory reset.
4.By installing a CF-Root kernel you are changing the stock kernel for a root kernel.Kies will still work with a stock Firmware and root kernel.Kies OTA updates will not work with a custom ROM nor updates via Kies.
You diserved many thanks man
EDIT: I think I understand what you're saying... As my actual firmware is 2.3.5 and I have a stock Kernel (I never touched it since I have my phone), I just have to install the 200MB file on Odin with the 2.3.6 firmware and that's ok?
ctomgee said:
Most firmwares will have kernels included. Work with that for now.
Yes. Those "Frankenstein" packages are stock, except Intratech mixed and matched the PDA, CSC, and modems. They just won't get recognized by Kies as a valid updateable firmware because of this though.
Flash an unbranded stock firmware. Post #2 above the Frankenstein firmwares of the same thread. Or the Frankenstein ones. The only difference is the non-Frankenstein ones will probably be recognized by Kies as upgradeable, and the Frankenstein ones will probably not.
Wrong. If you install just stock ROM, yes. CF-Root is a custom kernel, so if you install that, you ARE changing the kernel.
---------- Post added at 02:34 PM ---------- Previous post was at 02:32 PM ----------
As above, most if not all firmwares come with a kernel. If you want a custom kernel you must flash it AFTER you flash a firmware. Else if you flash a kernel first, then the firmware, then the firmware's kernel will overwrite the kernel you flashed first.
Kernels generally go in the PDA section of Odin.
Click to expand...
Click to collapse
Good work man. You said "You need to flash a 2.3.6 firmware if you are on 2.3.5 for example before flashing a XWLA4 ROM"... So, in this case I have a Vodafone ES 2.3.5 ROM so before installing XWLA4 I have to install another 2.3.6 ROM? Is this it?
There is my info about the ROM I have:
PDA: I9100BU KJ3
PHONE:I9100BU KI1
CSC:I9100 ATLKI2
cooza said:
1.XWLA4 is 2.3.6 so if you want to install a ROM with this Firmware and you are already on 2.3.6 then you dont need to flash anything.Root and flash the ROM.You need to flash a 2.3.6 firmware if you are on 2.3.5 for example before flashing a XWLA4 ROM.
1A. A kernel goes in PDA in Odin.
2.Its safe to install any ROM as long as you follow the instuctions that the Dev provides.You will have problems if for example you are on,as I already mentioned,2.3.5 and flash a 2.3.6 ROM.Always flash a ROM thats compatable with your Firmware.Frankenstein has firmwares not ROMs.Developers have ROMs.
3.To get rid of carrier apps all you need to do is flash a Firmware or custom ROM.Thats all.After flashing a Firmware its a good idea to do a factory reset.
4.By installing a CF-Root kernel you are changing the stock kernel for a root kernel.Kies will still work with a stock Firmware and root kernel.Kies OTA updates will not work with a custom ROM nor updates via Kies.
Click to expand...
Click to collapse
diogogomes11 said:
You diserved many thanks man
Although, a friend of ours on xda said to me that XWLA4 is excellent firmware so I would like to install it, but I don't know what to install first on Odin, the Kernel or the 200MB ROM are you understanding?
Click to expand...
Click to collapse
*sigh*... I'm understanding. It's pretty clear you are not.
Please read the "Edit" portion of my post above again. You don't need to install the kernel at all. That kernel is the stock kernel. It is already in the ROM. The only reason it is linked separately is if you flashed a different, non-stock kernel, and later wanted to flash back to a stock kernel.
If you DO want to flash a custom kernel, then you will ALWAYS have to flash it AFTER you flash a ROM. Because the kernel that is included with the ROM will overwrite whatever kernel is on the phone.
Savvy?
EDIT: We must've been posting at the same time.
diogogomes11 said:
You diserved many thanks man
EDIT: I think I understand what you're saying... As my actual firmware is 2.3.5 and I have a stock Kernel (I never touched it since I have my phone), I just have to install the 200MB file on Odin with the 2.3.6 firmware and that's ok?
Click to expand...
Click to collapse
Yes.
Thanks man. Now I think I'm understanding too The other colleague said "You need to flash a 2.3.6 firmware if you are on 2.3.5 for example before flashing a XWLA4 ROM." So, if I want to install XWLA4 ROM I have to install another 2.3.6 first? I think that's my last main doubt ?
ctomgee said:
*sigh*... I'm understanding. It's pretty clear you are not.
Please read the "Edit" portion of my post above again. You don't need to install the kernel at all. That kernel is the stock kernel. It is already in the ROM. The only reason it is linked separately is if you flashed a different, non-stock kernel, and later wanted to flash back to a stock kernel.
If you DO want to flash a custom kernel, then you will ALWAYS have to flash it AFTER you flash a ROM. Because the kernel that is included with the ROM will overwrite whatever kernel is on the phone.
Savvy?
EDIT: We must've been posting at the same time.
Yes.
Click to expand...
Click to collapse
diogogomes11 said:
Thanks man. Now I think I'm understanding too The other colleague said "You need to flash a 2.3.6 firmware if you are on 2.3.5 for example before flashing a XWLA4 ROM." So, if I want to install XWLA4 ROM I have to install another 2.3.6 first? I think that's my last main doubt ?
Click to expand...
Click to collapse
Not if it's stock. Depends on what he was talking about. Some custom ROMs require you to be on the same base version (i.e. 2.3.6) before flashing them.
You should be able to flash the stock XWLA4 ROM right now, if you've not updated your phone at all yet.
The Frankenstein XWLA4 ROM too?
ctomgee said:
Not if it's stock. Depends on what he was talking about. Some custom ROMs require you to be on the same base version (i.e. 2.3.6) before flashing them.
You should be able to flash the stock XWLA4 ROM right now, if you've not updated your phone at all yet.
Click to expand...
Click to collapse
diogogomes11 said:
The Frankenstein XWLA4 ROM too?
Click to expand...
Click to collapse
Yes. As stated, the only difference on Intratech's official firmware thread between the fully stock ROMs and the Frankenstein ones is he mixed and matched CSC and modems with PDAs on the Frankenstein ones. While this doesn't necessarily affect the operation of the phone, it will keep Kies from recognizing it as an updateable phone.
OK. Thanks and sorry for sending a private message at some seconds ago about this theme but I wanted to flash my new ROM
If I can help you on another thing, I'm available.
Thanks all xda good useres like you guys.
ctomgee said:
Yes. As stated, the only difference on Intratech's official firmware thread between the fully stock ROMs and the Frankenstein ones is he mixed and matched CSC and modems with PDAs on the Frankenstein ones. While this doesn't necessarily affect the operation of the phone, it will keep Kies from recognizing it as an updateable phone.
Click to expand...
Click to collapse
diogogomes11 said:
OK. Thanks and sorry for sending a private message at some seconds ago about this theme but I wanted to flash my new ROM
If I can help you on another thing, I'm available.
Thanks all xda good useres like you guys.
Click to expand...
Click to collapse
PM ignored, then. Good luck.
I've already installed the firmware and have made root. All OK except that I do *#272*Device IMEI# with my IMEI in order to install my CSC and it always says ATL and doesn't let me write TPH and if I click on install with ATL letters it says it needs only 3 letters!
Can you help me on this situation?
Thanks again.
ctomgee said:
PM ignored, then. Good luck.
Click to expand...
Click to collapse
diogogomes11 said:
I've already installed the firmware and have made root. All OK except that I do *#272*Device IMEI# with my IMEI in order to install my CSC and it always says ATL and doesn't let me write TPH and if I click on install with ATL letters it says it needs only 3 letters!
Can you help me on this situation?
Thanks again.
Click to expand...
Click to collapse
I have no clue what you're talking about. So I can't help you, sorry.
EDIT: what are you trying to do, exactly?
Look at this topic: http://forum.xda-developers.com/showthread.php?t=1075278
On Frankenstein Firmware's it says:
"For MultiCSC packages you can change between csc by typing *#272*Device IMEI# into the dial pad and selecting the csc of your choice and press install. It will reset the device."
So I installed a Frankenstein firmware and to install my country CSC - Portugal - I have to do something else right? So I've done *#272*Device IMEI# in order to install my CSC and it always shows "ATL" and doesn't let me write "TPH" - the letters for my country - and if I click on install with "ATL" letters it says it needs only 3 letters!
I want to install my CSC so I can browse the Web and receive MMS on my Samsung Galaxy S2.
Thanks again.
ctomgee said:
I have no clue what you're talking about. So I can't help you, sorry.
EDIT: what are you trying to do, exactly?
Click to expand...
Click to collapse
That will work if you have a multi CSC pack and the Firmware that you have installed does not.You cant type in your CSC,you have to select it from the list.Not all Frankenstein Firmwares have multi-CSC packs thats why at the bottom of the page there is a list of other CSCs to flash at your own choice.If you look at the Firmware you have flashed to your phone (XWLA4) it clearly states "CSC: XEUKH2" which is for the Great Britian region.At the moment the links are down so you cant download any CSC packs so the only way to get your countries correct CSC is to flash a custom ROM that has a multi-CSC pack built in like I did.As for the ATL question...you said that you had an S2 from spain,correct?!..well ATL is the product code for Vodafone Spain.
EDIT:you can browse the web on another countries CSC although it may not be as good and MMS settings are provider set.You could flash XWKK(2.3.6) which has a CSC pack for the Netherlands but normally also a KOR one too.The KOR(KOREA) CSC works fine for Spain and Portugal.I would suggest a custom ROM to get the best out of your phone.There are a lot around.
I have a rooted GT-I9100 with baseband XXKI4 and Kernel version 2.6.35.7-I9100JPKJ2. The CSC is given as OJPKJ1 (XSG).
As it is rooted I needed to flash one of the custom ICS offerings. Does it matter which one or can I choose any one of them on offer? Please advise.
Thanks
ftheba said:
I have a rooted GT-I9100 with baseband XXKI4 and Kernel version 2.6.35.7-I9100JPKJ2. The CSC is given as OJPKJ1 (XSG).
As it is rooted I needed to flash one of the custom ICS offerings. Does it matter which one or can I choose any one of them on offer? Please advise.
Thanks
Click to expand...
Click to collapse
first read the changelog of all those custom ics roms and see the diff in them and choose the one which fits ur need and flash the same
If you want to flash a (modified) firmware through CWM, then check out the wanamlite website or his thread (http://forum.xda-developers.com/showthread.php?t=1292825)
If you want to flash a pure stock firmware, then find one at SamMobile and use Odin to flash in download mode. You can find instructions on this if you do a search. This method does not require root.