[Q] "Can't mount /dev/block/vold/179:9" - Fascinate Q&A, Help & Troubleshooting

I was attempting to flash clockworkmod and I am now stuck in recovery. Attempting to reboot does nothing, I did a factory reset. Applying update.zip just gives me the error in the title of this thread, plus "can't mount update.zip"
I see this thread: http://forum.xda-developers.com/showthread.php?t=782204 as a last option but is there anything else I can do? If I remove my sd card and put a new update.zip on it manually, will this fix the problem?

ok a few things first.
1)which CWM did you install?
2)Which Rom are you trying to install?
if you have the rom on your sd card simply factory rest, wipe cache, and dalvik cash......
then without rebooting flash zip from sdcard [navigate to and flash your rom]
then reboot.
you shouldn't need the apply update zip
if that doesn't work odin a stock image and start all over again

xwhofarted said:
ok a few things first.
1)which CWM did you install?
2)Which Rom are you trying to install?
if you have the rom on your sd card simply factory rest, wipe cache, and dalvik cash......
then without rebooting flash zip from sdcard [navigate to and flash your rom]
then reboot.
you shouldn't need the apply update zip
if that doesn't work odin a stock image and start all over again
Click to expand...
Click to collapse
I'm not sure which version, the file only says "cwmrecovery.tar"
I'm trying to install CyanogenMod 7.1
Can you explain a little more regarding wiping cache and dalvik cache, and also how to flash the rom without using any application. I only have access to "reboot system now", "apply sdcard:update.zip", "wipe data/factory reset" and "wipe cache partition" as of right now
EDIT: Clockworkmod recovery is not functioning, if that was not clear.

Follow this guide for installing mtd roms such as cm7, aosp, miui...Just replace vgb rom with cm7.
http://forum.xda-developers.com/showthread.php?t=1212239

Related

[Q] Rooted my TBOLT with easy root, latest edition, now error when flash clockworld..

I finally managed to root my TBOLT with easy root, the latest version he put out last night. I made it through step 3 which just said congrats you have rooted, or w.e then it says flash clock world and i get "error occurred while attempting to run privative commands" any help for this?
In rom manager you have to check delete cache, then install latest version of CWM.
http://forum.xda-developers.com/showthread.php?t=1002667
pmazz850 said:
In rom manager you have to check delete cache, then install latest version of CWM.
http://forum.xda-developers.com/showthread.php?t=1002667
Click to expand...
Click to collapse
Thanks!
I guess the way to Flash a ROM is to place a Custome ROM in the SD Card and Use ROM Manager to Reboot into Recovery and Flash with Clockwork Recovery?
Or Can I select Install ROM from SD Card option in ROM Manager.....?
oneders65 said:
Thanks!
I guess the way to Flash a ROM is to place a Custome ROM in the SD Card and Use ROM Manager to Reboot into Recovery and Flash with Clockwork Recovery?
Or Can I select Install ROM from SD Card option in ROM Manager.....?
Click to expand...
Click to collapse
you can do either. I prefer to just boot into recovery, so I can wipe data/factory twice, and wipe cache, and delvik cache twice. then flash a new rom.
the second way you mentioned is more automated, but I don't feel is a thorough.
I tried all the steps but sometimes it just takes a simple reboot.

[Q] 2.3.5 with KI3 . Unable to install CM7

Hi,
Currently using latest firmware KI3 with root.
I'm able to use CWM, backup, install zips, everything.
However, if i install a ROM trough a ZIP, i get a boot loop.
Only way to get back the phone, it's to install via ODIN with latest KI3.
Even tried with Litening Rom, and got the boot loop.
Any ideas ?
I was very keen to return to CM7.
Tx in advance.
Did you exactly what's mentioned here?
Install via ClockworkMod (do not use ROMManager for initial install):
Make sure you're running a rooted device.
Root your device and install ClockworkMod Recovery (http://forum.xda-developers.com/show....php?t=1118693)
Do a Nandroid backup!
WIPE (wipe data/factory reset + wipe cache partition) - do it for real.
Install the ROM from internal sdcard using ClockworkMod Recovery.
Do not reboot! We mean it - do nothing except choose zip and continue next step (if you come back to us with permission issues in install, we will know you did not read the directions and will call you an idiot). If it just plain hangs, reboot directly back into ClockworkMod recovery and continue at the next step.
Install the ROM from internal sdcard using ClockworkMod Recovery, again (due to a bug in the install).
Reboot
Install the Google Addon through ROMManager which is easiest, but you can
download the gapps.zip and install via ClockworkMod recovery instead.
Click to expand...
Click to collapse
Did you try flashing a old stock ROM like KH3, root it then try from this base?
I went from Villain ROM 2.3.5 to CyanogenMOD without any problems.
It's essential that you flash CyanogenMOD !TWICE! in a row when you're coming from a stock ROM.
Thanks.
Gonna check, as soon as i'm @ 127.0.0.1
Same behaviour, back to boot loop.
Tanx anyway!
I had a similar problem so here goes my help.
Cf root kernel uses a modified version of CWM that isn't compatible with CM7 or something like that. So what I did was flash this kernel http://forum.xda-developers.com/showthread.php?t=1118693. Get the kernel with CWM 5.x.y.z With that I got a compatible version of CWM and from there I flashed CM7. It is important that you do a full wipe, wipe cache, wipe dalvik cache, format \system, everything so you don't get any trouble. THen you flash the CM7 zip file, when tha t is done, flash the zip again for a second time (don't reboot just do it after the first flash). After that reboot. That worked for me at least.
A tip: If you can't reboot your phone and you have no ROM zip file to flash via CWM you can mount usb storage from CWM for putting the ROM in sd card and flash with CWM. That way you don't have to use ODIN to recover.
Tanx Tomas.
Tried with CWM 5.x.y.z and upon "WIPE" always got an error for mounting partitions.
Could't mount CACHE, SDCARD .....
Tx anyway.
Back to ODIN, back to stock 2.3.5
PS : I have to get a JIG to reset ...

please help

Ok so i've tried to install a rom (Touwiz4), and i've tried to follow the steps, and as dumb as i am, i've used the update.zip method (by renaming the file to update). It installed, but everytime i turn the phone on, it is stuck on the samsung logo, please help me
Also: i can get into download mode and the Home+Power menu
Please help me, i don't know what to do if i lose my phone
this can always happen this is why you have to take backups...
What is your phone?
You can search around for stock roms or try to install another custom rom.
here are some locations where you can find stock roms:
http://andwise.net/?p=199
ok it's simple:
Recovery
Wipe data
Wipe Chace
Wipe devilchace
Reinstall rom
enjoy... ^_^
andwise said:
this can always happen this is why you have to take backups...
What is your phone?
You can search around for stock roms or try to install another custom rom.
here are some locations where you can find stock roms:
Click to expand...
Click to collapse
And if i get a rom (official or custom), should i use the apply update.zip option? Or there is another way?
ubas90 said:
ok it's simple:
Recovery
Wipe data
Wipe Chace
Wipe devilchace
Reinstall rom
enjoy... ^_^
Click to expand...
Click to collapse
how to wipe devilcache?
go to recovery mode choose wipe data, wipe cache partition, then go to advance, choose wipe dalvikcache, then reboot
sent from my Walkman
chepoz said:
go to recovery mode choose wipe data, wipe cache partition, then go to advance, choose wipe dalvikcache, then reboot
sent from my Walkman
Click to expand...
Click to collapse
I don't have the advance menu
you can use update.zip method (i suppose you just select 'apply /sdcard/update.zip')
or you can select 'choose zip from sdcard' in 'install zip from sdcard menu'
BUT before that, as ubas90 said you have to:
Wipe data
Wipe Chace
Wipe dalvilk cache (which is in the advanced menu)
If you do not have advanced menu it seems that your recovery is not really CWM (check that, it has to be written ClockworkMod somewhere).
You can install CWM following these instructions: http://andwise.net/?p=268
you can always try without wiping dalvilk cache,depending on the previous state it may not be needed.
andwise said:
you can use update.zip method (i suppose you just select 'apply /sdcard/update.zip')
or you can select 'choose zip from sdcard' in 'install zip from sdcard menu'
BUT before that, as ubas90 said you have to:
Wipe data
Wipe Chace
Wipe dalvilk cache (which is in the advanced menu)
If you do not have advanced menu it seems that your recovery is not really CWM (check that, it has to be written ClockworkMod somewhere).
You can install CWM following these instructions:
you can always try without wiping dalvilk cache,depending on the previous state it may not be needed.
Click to expand...
Click to collapse
I'll first try without installing CWM, i just don't need to get in more trouble
Also, what is the key combination for the ace for the bootloader use? When to use the fastboot.exe?
have u last recovery?
look is simple, make 3 wipe, then install zip and reboot
if couldn't make wipe devil cache could find the devil's zip by brainmaster...
ubas90 said:
have u last recovery?
look is simple, make 3 wipe, then install zip and reboot
if couldn't make wipe devil cache could find the devil's zip by brainmaster...
Click to expand...
Click to collapse
Do you happen to have a link?
OMG after i installed another rom the exact same thing happened
It worked! I'm so happy right now
I've used odin, and it was easier than it seemed
Also, thanks everybody for your help, it's greatly appreciated

CheeryKang 0.9.2 will not install on TouchPad

Hi,
I am currently running CM9 Alpha2 ICS.
I thought of upgrading to CherryKang 0.9.2, I followed the steps below, but after install CherryKang would not come up.. I see the dual boot menu and when the cyanogen mod menu item is selected it blanks out and then reboots again and I see the dual boot menu again.
I did full wipe, Factory reset, Advanced-Dalvik Cache and also under Mounts and Storage System wipe, and lastly Wipe Cache. After install i did Factory Reset again and Wiped Cache again. Rebooted Touchpad and nothing comes up.
I also tried unsintall thru ACMEUnInstaller and then put CherryKang 0.9.2 in the cminstall directory and the install process did not install the CherryKang 0.9.2
What am I missing?
Thanks
TOO1BEE said:
Hi,
I am currently running CM9 Alpha2 ICS.
I thought of upgrading to CherryKang 0.9.2, I followed the steps below, but after install CherryKang would not come up.. I see the dual boot menu and when the cyanogen mod menu item is selected it blanks out and then reboots again and I see the dual boot menu again.
I did full wipe, Factory reset, Advanced-Dalvik Cache and also under Mounts and Storage System wipe, and lastly Wipe Cache. After install i did Factory Reset again and Wiped Cache again. Rebooted Touchpad and nothing comes up.
I also tried unsintall thru ACMEUnInstaller and then put CherryKang 0.9.2 in the cminstall directory and the install process did not install the CherryKang 0.9.2
What am I missing?
Thanks
Click to expand...
Click to collapse
0. 9.3 is out now, so you might as well install that.
Wipe /delete factory reset, wipe dalvik cache and install.
Make sure you have a good download (check md5).
No need to wipe /format anything after you install (I don't).
It should work.......
Don't forget to have a good backup in case things don't work.
I tried to use 0.9.3 but goes into a boot loop as before. Is it because I am also doing a "system format" under Mount and Storage?
I don't think cherry will install from cminstall since it doesn't start with update... or gapps...
I've always had to install it via CWM. I had to run the boot image cleaner and wipe everything before installing.
Sent from my MB860 using XDA
I did the update thru CWM. It did not work and goes into boot loop.
What else can I do
Are you still formatting system every time? Try skipping that. Just wipe caches and install ROM then gapps.
Sent from my MB860 using XDA

[Q] Help please!! Boot loops after installing Zelly Cream v1.20

Please help!! I have searched all over this forum but i still can't find a solution to my problem
First of all, I'm still new in android modding so please forgive me if I don't have sufficient information regarding this question.
I have an Xperia neo, with the original ICS firmware (4.1.B.0.587), locked bootloader, rooted with this method http://talk.sonymobile.com/thread/97327
and I use the CWM Recovery 5.0.2.7-nAa-r2 from this thread http://forum.xda-developers.com/showthread.php?t=1364509 because my phone won't go to the recovery mode if I use the x-parts CMW package
I have tried installing the Zelly Cream v1.20 custom rom by following the exact instruction for locked bootloader, which is :
Installation instruction for Zelly Cream FULL ROM
Before installing this rom, make sure you have a complete nandroid backup and you
have performed all the necessary steps, otherwise you may get bootloop. I will not be
responsible for any kind of damage or loss to your phone, do this at your own risk. Read
carefully and follow the steps to install the rom.
1. Reboot to cwm.
2. Wipe data/factory reset.
3. Wipe cache partition.
4. Wipe dalvic cache under advanced menu.
5. Wipe battery stats under advanced menu.
6. Format data under mount and storage menu.
7. Format system under mount and storage menu.
8. Format cache under mount and storage menu.
9. Install zip from sd card.
10. Follow the steps in aroma installer to install the rom.
11. Uncheck "Reboot device" after installation completed and click on next to go
back to CWM.
12. Now reboot your phone..
Click to expand...
Click to collapse
But my phone keeps rebooting (boot loops) so i had to reinstall the original ICS firmware using this method http://talk.sonymobile.com/thread/35239 . After that i re-rooted my phone, restored my nandroid backup, and tried installing Zally Cream v1.20 again. But I still get boot loops and now I'm getting desperate (so in summary i have bricked/boot looped my phone twice trying to install the Zelly Cream) :silly:
So can anyone please help me??
Any answer would be much appreciated. Thank you!!
After flashing stock firmware why did u restored nandroid backup??
Flash stock firmware using flashtool with full wipe
Root it, install cwm
Goto cwm & wipe cache, data, delvik cache, format system, data cache
Now flash the rom
Reboot
Sent from my MT11i using Tapatalk 2

Categories

Resources