i've looked pritty much on the internet to find a awnser..
but my usb in my htc is broken and i need to repair it.
is there a way to get android on your sd card and flash the rom on your sd card? i can't use usb if somebody know's my awnser please help me
Related
As a result of a car accident I lost the ability to connect my Himalaya using the USB cradle. The data port on the phones board was completely smashed. I had it repaired only to allow my xdaII to recharge from it's power adapter but not from the cradle, that's how I lost all usb functionality.
Now I've previously read some methods and instructions on how to upgrade the xdaII using some modified rom files which are then stored on a SD-Card and then installed from the bootloader without the use of a USB connection.
Can anyone here tell me exactly how this is done ? What are the steps needed to convert the available rom files on this site to a format that would work from the sd-card ? I would also like to know, whether this method supports upgrading the radio and the extended rom in addition to the windows rom ?
Your help and assistance on this matter will be highly appreciated. As I can no longer upgrade my phone using the usb method. I will be depending on your help you guys. I've got faith in u, so don't let me down.
I also want to know it! Please help!!
Find another xda2 that has a working USB connection, insert your SD card in it, and use the attached file to copy the rom to your sd card. Then place the sd card in your xda2 go to boot loader mode and that is it.
The only problem is that whenever you want to change the rom version you will have to use another xda2 that has a working usb to transfere the rom image on your sd card.
hello all, is there any way to falshing prophet from SD (memory card) cuz my USB socket on my device is got broken but it able to charge
plz give me any info about this .. thx
khsanad said:
hello all, is there any way to falshing prophet from SD (memory card) cuz my USB socket on my device is got broken but it able to charge
plz give me any info about this .. thx
Click to expand...
Click to collapse
Only way to flash from SD is when flashing a ROM dumped directly from the phone as a backup.. even then you needed USB to let your PC tell your Device to dump the backup to SD.. The dump data on the SD card cannot be read as files because its RAW data.. There is no way to extract that data to a ROM file and likewise no way to flash a ROM file available here or anywhere to the device through the SD card..
So in theory.. if you had 2 HTC Prophets you might be able to flash the 1 device through USB, Dump the ROM to SD and use that SD card to flash the 2nd device.. This is only in theory! Never tried it..
Curiously though.. if your USB port is damaged how do you charge it?
hi guys,
I'm in Australia on the Telstra network, and have had an issue with the charging and sync through the micro usb port, i was running winmo6.5 miri at the time, and because of the usb sync issue i couldnt flash it back to the original OS.
is there anyone that could recomend a fix for this problem? what ive done is sent it away to be fixed through telstra, maybe they wont realise there was a different OS on there after replacing the (hardware?) issue, and then wipe it? that will be under warranty, but i have a feeling that its not going to happen and the service with no fix will cost me $50, is there any other way i can reflash the device without usb sync? or has anyone replaced internal hardware on the device before?
anyway, let me know
cheers.
you can reflash via memory card.
can someone post the thread discussing memory card reflashing?
Extract your rom and rename the RUU_signed.nbh to leoimg.nbh then copy it to your memory card, put memory card back in phone, hold volume down button and power on the phone, then follow the instructions, Make sure you use the correct rom for your phone.
This may help http://www.youtube.com/watch?v=nrmlqrfCvas
i should try and get the phone off them and reflash it before sending away again..... ****.
hey, i been searching around but still dont know how to solve this, im running on GTX rom and i cant access sd card through file explorer, its always in the My device folder, help would be apprieciated!
Maybe it's not recognised by the smartphone for some reason....You can try to turn off HTC and remove SD card, then turn on and again turn off and insert SD.
Another try is to try to read SD directly with a PC to understand if is broken or need a format.
I currently possess an HD2 I have installed android from the dark force team 2.2 my phone seems to be functioning fine however I would like to put Cyanogen on my device. I downloaded the package for it and saved it on my desktop however to port it onto my phone would require me to access my sd card via the computer and ever since i got android i am incapable of accessing my sd card. So how can I put cyanogen on my sd card and is there another way to go about this since the froyo is permanet on my phone?????
Well the easiest way of doing this is to get yourself a USB micro SD card reader and put your SD card into it and copy the ROM to your SD card. Then put the SD card back into hour HD2 and flash the ROM using MAGLDR.
Now your other option is to download a custom Windows Mobile ROM. Then put your HD2 into bootloader by turning the phone off and then hold the vume down button down and press the power button. Keep holding the volume down button down until you see the muticolor bootloader screen. Next connect your HD2 via USB cable to the computer and wait for the Serial in the white bar of the bootloader screen to change to USB and for your computer to show it recognizes your HD2 (this should happen almost simotamiously). Then you can flash the Windows Mobile ROM. you can then use your phone to access your SD card and then use MAGLDR to flash the Andriod ROM.
Also I was thinking about putting gingerbread cyanogemod7 on it since its newer. Is there a nand for it I am having trouble finding one?
If you want to know about Android on the HD2 why are you asking these questions in the Windows Mobile 6.5 Q&A forum
You are much better off using the relevant forum, firstly to read the guides and then second to ask questions, I say second because 9/10 your question has already been asked and answered or covered in the sticky threads