[Q] Stuck into Bootloop (CM7 Animation) - Optimus One, P500, V General

few hours ago' i was moved my Launcher from phone to sd card and after that i rebooted my phone and im stuck into bootloop which was the CM7 Animation.. nothing happens after that.. tried many times..
i was wondering if the problem came from moving the launcher from phone to sd card'?
i dont have the stock launcher that was came from Mik's 6.5.7 coz i deleted it on system apps.. can somebody help me with this'?
im looking for a solution where-in i need to FLASH a new launcher not installing it as a normal apk because i know that if i flash a new application it will automatically install on PHONE not on SD ..
does anyone here has a flashable zip for a launcher'?
look at my sig for more info about my phone..
thanx!

All you really have to do is reflash 6.5.7 to get the default launcher, Ive never moved any launcher to as storage, the rule is you don't move widgets to as card.
Sent from my LG-P500 using XDA App

Jrhodes85 said:
All you really have to do is reflash 6.5.7 to get the default launcher, Ive never moved any launcher to as storage, the rule is you don't move widgets to as card.
Sent from my LG-P500 using XDA App
Click to expand...
Click to collapse
i didnt moved widget to sd card' just the launcher..
later, will try the solution that i mentioned and i will give feedback if it will work or not..
i know that there's alot of ways to solve this ****.. i hope one of the DEV can see this to help me outta this ****ty situation

It's definitely caused by moving your launcher. You should flash the rom again or just restore system from a previous backup of the rom
Sent from my LG-P500 using xda premium

Joel Chan said:
It's definitely caused by moving your launcher. You should flash the rom again or just restore system from a previous backup of the rom
Sent from my LG-P500 using xda premium
Click to expand...
Click to collapse
if i re-flash the rom' will it only change the settings on my phone' not deleting my installed applications'?
sorry for the noob question coz i havent done this before
**i cant find any flashable launcher to test if that will work

As long as you don't wipe data/factory restore, all you need to do is wipe dalvik and wipe cache bit do Nand backup before hand than reflash 6.5.7
Sent from my LG-P500 using XDA App

Related

[Q] n00b question about A2SD, CM7 beta3, and widgets

hi
i recently flashed the CyanogenMod 7 beta3 found here
I have an issue with my apps, prob. due to the a2sd stuff. i can't see most of my app's widgets, including the messaging widget. maximum annoyance!! when i put other apps such as facebook in the phone memory, the widget appears in the selection screen, but the messaging app was and is in the phone memory all the time..
HELP WILL BE EXTREMELY APPRETIATED
also, i'm planning to make a vid about flashing the cyanogenmod rom to a phone. who's with me!
i'm having problems with darktremor's a2sd too, it seems to be that it's unable to mount/recognize /sd-ext... i've just backed up with TB, re-partitioned and wiped everything, let's see if a fresh flash enables CM 7 b3/a2sd to recognize /sd-ext -.-"
it keeps gettin stuck at the cyanogenmod animation... it's getting me mad!
there was no way for me to get dt's a2sd working on cm7b3... -.-"
uncle_gonny said:
it keeps gettin stuck at the cyanogenmod animation... it's getting me mad!
Click to expand...
Click to collapse
Look at the CM7 thread, in the first post is the solution to your problem, you just need to flash a .zip before flashing CM7..
uncle_gonny said:
there was no way for me to get dt's a2sd working on cm7b3... -.-"
Click to expand...
Click to collapse
I think it is native to the system, at least you are able to move apps..
Correct me if i'm wrong
Am I the only one that the choise of the keybord is not stored between reboots?? can someone test please?
(using smartkeyboard pro)
Moved the app to phone memory and worked fine, my bad!
Well, these actions may help you guys "am not sure":
-When installing a widget in CM7, never move it to SD card, it will be only recognized when it's located at phone memory.
-When installing CM7 itself, don't partition your SDcard, just format it using PC or any utility and install CM7 using recovery "so it won't stuck".
-if the stuck thing still happening, download from CM7 topic a Wiper file which will wipe your system setting if wiping is not working on your O1.
thegost4u said:
Well, these actions may help you guys "am not sure":
-When installing a widget in CM7, never move it to SD card, it will be only recognized when it's located at phone memory.
-When installing CM7 itself, don't partition your SDcard, just format it using PC or any utility and install CM7 using recovery "so it won't stuck".
-if the stuck thing still happening, download from CM7 topic a Wiper file which will wipe your system setting if wiping is not working on your O1.
Click to expand...
Click to collapse
I did the partition but flashed the Wiper file, worket fine!
Is thera any way to flash CM7beta4(when it's released) and keep all the apps and configs?
EDIT: Sorry, wrong thread.
When i connect the phone to USB, the widget crash, and also the apps i have to move it to SD because they installing in the phone memory. Dont recognize the Partition.
Sorry for my English.
question
my messaging app (stock) is in my memory, and i can access it, but i cannot access the messaging widget. CAN ANYONE HELP?
I'm not that noob, I can follow instructions, I erased /system using adb, and flashed cm7 many times, partitioning (needs to be done to get darktremor's a2sd working) and flashing a2sd every time, it's just that this time just didn't work... I flashed again doing a "fresh install" and got cm7 to load, but there's no way to get a2sd working... Using "native" cm7's a2sd doesn't just move apps to fat32 partition?
Sent from my LG-P500 using XDA App
batista16 said:
I did the partition but flashed the Wiper file, worket fine!
Is thera any way to flash CM7beta4(when it's released) and keep all the apps and configs?
Click to expand...
Click to collapse
If you already have cm7 on the device, flashing the rom's zip file from recovery should be enough ;-)
Sent from my LG-P500 using XDA App
JustKastillo said:
When i connect the phone to USB, the widget crash, and also the apps i have to move it to SD because they installing in the phone memory. Dont recognize the Partition.
Sorry for my English.
Click to expand...
Click to collapse
Are you using darktremor's a2sd?
Sent from my LG-P500 using XDA App
uncle_gonny said:
If you already have cm7 on the device, flashing the rom's zip file from recovery should be enough ;-)
Sent from my LG-P500 using XDA App
Click to expand...
Click to collapse
Do I need to wipe something? (so I can flash the phone but keep apps and configs)
batista16 said:
Do I need to wipe something? (so I can flash the phone but keep apps and configs)
Click to expand...
Click to collapse
I don't think so, try, beta 4 is coming out today ;-)
Sent from my LG-P500 using XDA App

how to remove data2sd ?

i used to have a bookmark to a thread about how to remove it. but i seem to have lost it
anyone wanna help me please ?
thanks
Hey man I'm not one hundred percent sure about this but I don't think you can. You probably need to restore an old rom with xrecovery then reflash your current rom without it
Sent from my X10i using XDA Premium App
Delete or Rename the file "data.img" located in "sdcarcd/xrecovery"
im almost sure there was a way. u have to rename some file on the sdcard i think.
thanks tho. yea i thought about that but dont really feel like it lol
Or just wipe factory data in xrecovery and wipe cache then reflash your current rom but before that make a backup using titanium backup then once you reflash your rom download titanium and press restore missing apps with data and your good to go
Sent from my X10i using XDA Premium App
DynamicRam said:
Delete or Rename the file "data.img" located in "sdcarcd/xrecovery"
Click to expand...
Click to collapse
thank you !!

Link2SD - Gingerbread Issue

Hey guys, I've a problem with gingerbread. I've created an ext2 partition on my sd card. LINK2SD successfully installs, but when I start the app it asks for partition type and reboots immediately. I never came across this problem with froyo. Please help me out.
Thank You
as far as I know,there is no solution yet,the problem is on ace you can't write the init.rc file yet.
Link2SD works perfectly on Froyo. Hence I'm holding back upgrading to Gingerbread until that's fixed .
2ma said:
as far as I know,there is no solution yet,the problem is on ace you can't write the init.rc file yet.
Click to expand...
Click to collapse
For now, I worked around the problem this way:
http://forum.xda-developers.com/showpost.php?p=14159285&postcount=1317
You must install with Odin a CODE_S5830XXKP modified file (it contains changed init.rc).
You can use DarkTremor App2SD with VillainROM...
post here: http://forum.xda-developers.com/showpost.php?p=13987128&postcount=50
pico.marco said:
For now, I worked around the problem this way:
http://forum.xda-developers.com/showpost.php?p=14159285&postcount=1317
You must install with Odin a CODE_S5830XXKP modified file (it contains changed init.rc).
Click to expand...
Click to collapse
Cool, thanks for sharing. However, I wanted to ask if it is ok to upgrade to KPE and also do the above technique without any factory reset or wiping the data and having to reinstall all apps again. I already have Link2SD set up on my KC1.
Also, I dunno much about DarkTremor's A2SD, is it better than Link2SD in any way?
Sent from my GT-S5830 using XDA Premium App
nish7x said:
Cool, thanks for sharing. However, I wanted to ask if it is ok to upgrade to KPE and also do the above technique without any factory reset or wiping the data and having to reinstall all apps again. I already have Link2SD set up on my KC1.
Click to expand...
Click to collapse
Every time you make a change with Odin, the phone is completely reset and data are lost (with a backup program is not a big problem). This does not happen just by upgrading by Kies.
Hmm, well not really an upgrade but I did reflash my KC1 when I got soft bricked twice, and all my data was intact I believe.
Sent from my GT-S5830 using XDA Premium App
nish7x said:
Hmm, well not really an upgrade but I did reflash my KC1 when I got soft bricked twice, and all my data was intact I believe.
Sent from my GT-S5830 using XDA Premium App
Click to expand...
Click to collapse
With odin? I do not know... Long ago I have flashed KC1 and recently KPE (two times) and this has always reset the phone memory (I lost applications, settings, etc.). Better for you
Yeah I did with Odin. Reflashed KC1 twice. I just lost certain minor stuff like Speed Dial numbers and all. My Google and other accounts were still there. Also my Messages.
Sent from my GT-S5830 using XDA Premium App
You can use Titanium Backup or MyBackup for backup your apps and data... its easy and fast...
Yeah I have my apps backed up on Titanium. I just didn't want to deal with manually Link2SDing them one by one again.. I dunno if Titanium would restore the linked and non-linked apps as they are now.
Sent from my GT-S5830 using XDA Premium App

Roms

Do you need to ALWAYS complete ly always wipe data factory when flashing aROM AND WHAT'S THE BEST ASOP ROM FOR THUNDERBOLT THAT WON'T BE A HEADACHE,I'M DAS BAMF RC4.9 and can't seem to flash anything else cuz other roms to me are messing up Rom my back roms, like no root check no titanium, just need simple help
Sent from my ADR6400L using XDA App
Unfortunately yes....i use app monster from market to backup my apps. But if ur on a rom and ur just flashing the same rom but just the update then u can wipe cache,davik and under mount/storage wipe format/system....dont worry it wont wipe whats on ur sd card.
Select Wipe Cache
Select Advanced
Select Wipe Dalvik
Select Go Back
Select Mounts and Storage
Select Format /system
Select Go Back Until you are at the first screen
Select Install from SD Card
Select Choose ZIP
Go to the folder where you downloaded the ROM
Select ROM
Select Yes.
When it is done Reboot.
Enjoy!
Sent from my SHIFTAO5P using XDA App
Hey sporty thanks for answering without the o I broke xda rules badgering I get from other peeps well I'm start doing that for any Rom i flash
Sent from my ADR6400L using XDA App
Hey do u know by chance y when I flash the shift asop Rom it's telling me that there's no sd card I did the steps u told me & everything went well but no music no camera sucks on a good Rom shift asop _v12x_esclipse
Sent from my ADR6400L using XDA App
sheathunderboilt said:
Hey do u know by chance y when I flash the shift asop Rom it's telling me that there's no sd card I did the steps u told me & everything went well but no music no camera sucks on a good Rom shift asop _v12x_esclipse
Sent from my ADR6400L using XDA App
Click to expand...
Click to collapse
Does Gtalk also force close? If so, go to the q AND a thread and download the .zip in the link the "Notices" section. Flash it in ClockworkMod, not ROM Manager, just as you would flash a ROM. Reboot, give it 2 tries and it should work fine... Assuming the problem is what I think it is.

Bootloop when remove system apps

Hi every1 ive recently flashed back to minicm7 but one problem I tried to remove adw launcher and dsp manager using root uninstaller and everytime I do saw=bootloop and I cant even restore a backup it would still bootloop I HAVE TO REFLASH everytime ii do it
Sent from my U20i using xda app-developers app
LukBoy99 said:
Hi every1 ive recently flashed back to minicm7 but one problem I tried to remove adw launcher and dsp manager using root uninstaller and everytime I do saw=bootloop and I cant even restore a backup it would still bootloop I HAVE TO REFLASH everytime ii do it
Sent from my U20i using xda app-developers app
Click to expand...
Click to collapse
removing dsp manager not caused your problem. if you want to remove LAUNCHER, YOU NEED TO INSTALL ANOTHER ONE BEFORE UNINSTALLING THE OLD ONE. that is all. no launcher, no system to boot xD
penthaler said:
removing dsp manager not caused your problem. if you want to remove LAUNCHER, YOU NEED TO INSTALL ANOTHER ONE BEFORE UNINSTALLING THE OLD ONE. that is all. no launcher, no system to boot xD
Click to expand...
Click to collapse
I did ,i installed the xperia launcher by serajr and im currently on it now when remove dsp and adw=no boot maybe has something to do with serajr's need for system files?
Sent from my U20i using xda app-developers app
LukBoy99 said:
I did ,i installed the xperia launcher by serajr and im currently on it now when remove dsp and adw=no boot maybe has something to do with serajr's need for system files?
Sent from my U20i using xda app-developers app
Click to expand...
Click to collapse
I opened the zip for my minicm7 in 7-zip, put all the files for serajr's experia launcher in the right places, deleted adw and dsp, and then flashed the rom... the installer script automatically takes care of all the needed permissions, so no need to worry about that. It gave me no problems.
LukBoy99 said:
Hi every1 ive recently flashed back to minicm7 but one problem I tried to remove adw launcher and dsp manager using root uninstaller and everytime I do saw=bootloop and I cant even restore a backup it would still bootloop I HAVE TO REFLASH everytime ii do it
Sent from my U20i using xda app-developers app
Click to expand...
Click to collapse
THE HARDWAY
hey bro i have HTC PICO(explorer) and i have custom rom by evervolve after i install the rom it give me DSP MANEGER error 1st i used root explorer then uninstall but the phone response read file only the other solution is i reinstall the ROM then remove the the apk 1st backup the files .... open the custom rom that you downloaded (don't extract)>system>app>dps maneger>right click>delete files>are you sure you want to delete the bhah blah>ok
use your CWM
then go to mount and storage.
Select USB storage and connect your phone to your computer.
the copy the rom then UNMOUNT.
then same procedure installing the rom then reboot...
sorry dont know which should i credit this xD i just used my common sense ahaha but the procedure i used from the other so
REFERENCE:
xpmode
sviswas7
AND ETC..

Categories

Resources