When i got this device i thought how stupid this was and hoped after flashing a custom rom maybe it would eliminate this stupid feature of this device. It seems HTC thinks it's a good idea to turn the screen ON after ending a phone call, WTF?
At work i use my bluetooth headset all day with my phone in my pocket. I will take my phone out, dial the number i want to speak to, press power to turn screen off, put device in pocket and have my conversation. I end the phone conversation with my bluetooth headset and guess what? The dang phone's screen turns on while it is in my pocket. I guess the light sensor has zero effect here! So now since this happens and my device has a timeout of 2min i set before screen turns off my phone accidentally "butt dials" people and without me knowing i'm now calling people randomly while i'm working!
Another case. I have my phone in my car's cupholder, i use bluetooth to make a call with my car, it initiates the call to my phone and again it turns the screen ON to make the call. WHY? I never pressed power on my device to turn the screen on to make a call. So again i press the power button to turn screen off while in call. I hang up the call when i'm done via the bluetooth in my car and again the device turns the screen back ON once i disconnect the call via bluetooth.
I just don't understand the logic behind this? Is this some HTC thing or all android? Coming from iPhone 4 never had this issue so was a first for me with this device. Just don't see the reason or logic for this?
Anyway to prevent this or stop this from happening? I mean isn't that the point of bluetooth to not need to touch your device thus no need for the screen to be turned on????
+1
It seems that this is not a HTC thing because I have the same behavior on my Samsung device. Same problem as well with pocket dialing during/after a call. Really annoying. I had the same thing on my old HTC Nexus One running Froyo, so this is not a new bug. Back then I tried a lot of different apps, and none helped. I even flashed CyanogenMod on it and it didn't change anything.
I really hope someone has run across a fix whether it's an app, a patch or a whole new ROM, because pulling my phone out of my pocket to turn the screen back off TWICE for every call I make or receive is getting to be a pain.
I can't believe this behavior is voluntary on the part of the designers. If it is, please someone explain why.
You can use TASKER(automation app at Play Store ) to Get you screen off after a call or while connected to the bluetooth ..
ethanon said:
You can use TASKER(automation app at Play Store ) to Get you screen off after a call or while connected to the bluetooth ..
Click to expand...
Click to collapse
Just downloaded but no idea how to use this thing. Not very saavy with this type of stuff. How can I use tasker to turn the screen off when ending a call ONLY while connected to a Bluetooth headset? This is my biggie since it's in my pocket.
Got it to work
Ok, I downloaded Tasker and I'm impressed.
Here's how I got this to work:
1: Create new profile using STATE, then go to NET, then hit BLUETOOTH CONNECTED. Here you can specify if you want only a specific device or any Bluetooth.
2: Set new task: SET plsLock to ON
3: Set exit task: SET plsLock to OFF
4: Create new profile using EVENT, then go to PHONE, and hit PHONE OFFHOOK.
5: Set new task as: SCREEN, SYSTEM LOCK
6: Hit IF, and specify if plsLock is ON
7: Create new profile using EVENT, then go to PHONE, and hit PHONE IDLE.
8: Set new task as: SCREEN, SYSTEM LOCK
9: Hit IF, and specify if plsLock is ON.
You're done.
Since I had the same problem with the wired headset, I also created a profile with HARDWARE, HEADSET that sets the variable plsLock to ON and exit task sets it back to OFF. You can name the variable anything you want and it will still work.
If anyone has a better/simpler way of programming this, please share. I just started using this program and am still trying to wrap my head around the way this is structured.
As this stands, it works... But it's still a patch on something that should be an option in Android.
Let me know what you think.
Ok thank you I'll give it a try. Yeah could never understand why my device thinks it's a good idea to turn screen back on after ending a call via Bluetooth or not? I receive call, I then press power button to turn screen off bit continue my call, the caller hangs up, boom my screen turns on displaying the phone dialer until my time out settings turn screen off. Dumbest feature I swear. Hello phone I pressed power offbutton to turn screen off, get the hint and keep screen off until I press power button and want it back on again. No sense...
Deeznuts, did you manage to get it working with tasker ? I guess it is the only possible way to get to your objective. Learning Tasker will give a new dimension to your phone. More over I will try to make a profile for your and get working .
For some reading
http://www.pocketables.com/2013/06/...rt-0-tips-and-tricks-for-learning-tasker.html
ethanon said:
Deeznuts, did you manage to get it working with tasker ? I guess it is the only possible way to get to your objective. Learning Tasker will give a new dimension to your phone. More over I will try to make a profile for your and get working .
For some reading
http://www.pocketables.com/2013/06/...rt-0-tips-and-tricks-for-learning-tasker.html
Click to expand...
Click to collapse
No unfortunately not. I would greatly appreciate that! I would think it's a simple task but honestly I'm very handicapped when it's comes to stuff like this.
Basically a string for tasker that would simply just do this:
When my device is connected to a Bluetooth device whether it be my car kit, headset, stereo headset, etc. and a phone call ends where by me pressing the End Call on screen button, by ending call with car kit, headset, etc, doesn't matter but will make the screen turn off. That's it.
When connected via Bluetooth, a phone call ends, screen turns off.
Now here's a kicker and not sure if this part would be harder. I'm connected via Bluetooth headset or device, I have screen on to manually make a phone call, then while on the call I press the power button to turn screen off while on call and put device in my pocket. Now when the call eventually ends I would want the screen to stay off.
I will read into the link you provided and mess with it somewhere. Thank you for your time and help.
Correct me if I am wrong , you mean to say that no matter what you want your screen to stay off after a call ...
ethanon said:
Correct me if I am wrong , you mean to say that no matter what you want your screen to stay off after a call ...
Click to expand...
Click to collapse
Correct BUT only when connected to a Bluetooth device. My gripe is on a Bluetooth call, place a call manually then talk on headset, car kit, etc. I press power button to turn screen off then put phone back in pocket, when call ends the phone turns screen back on for some reason. Never understood this?
I tried googling but couldn't find any results.
I like the Silent Connected Phone feature because it prevent my phone from ringing when I am already wearing my watch. The problem is, when I got home, and I put my watch on the table or charger, then when I call come in, my phone will not ring as well, and both my watch and phone will just vibrate.
Is there a way for the watch to detect that its not on my hand (I noticed that sometimes the display goes blank), and then disable the silent mode on my phone?
Or is there an app or workaround that can do this?
Thanks in advance!
Today, after 10 days with my S6, I had my first problem and panic scene. Here I go, well, I use my S6 in my car by bluetooth for hands-free calls but today when I recieve one call, the phone loose the conecction by bluetooth and dont find the car link. But the worse it was that the recognize of my fingertips fail and I had to enter the code unlock by number. Was the reason for that? I must to be worry? Sorry for my english and thank
Hi guys
I have a Meizu MX5 that got some sea water in the screen, that's all! Since then the phone charges, it connects, the physical buttons work but the screen doesn't reply to the touch. My problem is, for security reasons i always connected the USB option "charge only" so now how can i recover my data from it?
I can charge the phone when connected to a pc but is there any way to force the device from the pc to allow the access to it?
Hello,
when I put on the dual screen cover, and try to phone via Whatsapp or FB messenger, without visio just audio, the problem is that, as I'm closing the dual screen cover to put the phone to my ear, at one point the phone goes in sleeping mode and the call stops. This does not happen with the regular cellphone calls.
Is there a solution for that apart from taking the phone out of the dual screen cover? A settings in thos apps to avoid the sleeping mode?
Thx