Before I install any of the custom ROM, I want to backup my existing stock ROM. But most of the applications which work for other cells like xrecovery and rom manager do not seem to work for Xperia Mini ST15i. So how do I back up my existing ROM before I start trying other ROMs.
I have read the the thread freeXperia and I am aware of the bugs in CM7.1.0 .
Can any one help me with this problem .
My cell is already rooted and is running on the DoomLord Kernel.
Thanks,
just an idea, not sure if this can be considered as a ROM backup i've just bought my first android and still have a lot to learn about it: i'm sure someone with more knowledge will come and resolve your doubt properly but in the meantime think about this:
- flash boot.img from CM7 which has recovery
- make a backup of your settings with recovery
- install CM7 and see if you like it
- to return to stock rom flash kernel.sin and system.sin which are inside the ftf file from your stock FW, and flash them; again, flash boot.img from CM7 (has recovery, remember) then do a restore of your settings. Last, flash doomlord kernel and you should have your stock rom back the way you left it before installing CM7. (not sure if would work if just system.sin is flashed without kernel.sin to avoid the reflashing of CM7's boot.img ) (i suppose it would be rooted again since that was the status when you made the backup).
that's it, some one correct me please if i'm wrong...
hey man, I m brazilian an than cold b that i dont understand your question,
but goes there, you need know 1 thing, after you'd maked a backup with xrecovery ,
could happen that not make work in to recovery, but the backup is right and working, you need make it, 1 recovery original of mobile ,2 instal the custom zip rom, 3 after all, go to xrevovery and make the recovery, from your backup, ha dont forget that reset full wipe
@rael2000ix
Related
Hello everyone,
I have SGS2 with latest stock firmware (XWKI4) for my region.
Now, I would like to start playing with it with roms and such (yes, I already have Jig just as safety net), however I would like to creat as close as possible original configuration.
Now, I have rooted the phone with zergRush by Doomlord sucessfully and made efs backup as well as kernel image backup via HC-kTool. (This is kernel image backup right?) This way I presume I got pretty much untouched kernel image except rooting, right?
What now I would like to do is to make ROM backup and install some recovery. I know that Clockwork that comes with Rom Manager isnt exactly the same as Chainfires CW that comes with CF-Root and I know that Chainfires CW is optimized for Samsung phones (not to mention that they are not compatible with each other).
I guess my question would be is above that I did make sense, and shall I install CW from ROM Backup or get some CF-Root kernel with CW? I mean what do I lose with each solution, or any other advice how to complete ROM backup so that I can recover it if something, God forbid(knock on the wood), gets fishy?
Cheers
Kepavi said:
Hello everyone,
I have SGS2 with latest stock firmware (XWKI4) for my region.
Now, I would like to start playing with it with roms and such (yes, I already have Jig just as safety net), however I would like to creat as close as possible original configuration.
Now, I have rooted the phone with zergRush by Doomlord sucessfully and made efs backup as well as kernel image backup via HC-kTool. (This is kernel image backup right?) This way I presume I got pretty much untouched kernel image except rooting, right?
What now I would like to do is to make ROM backup and install some recovery. I know that Clockwork that comes with Rom Manager isnt exactly the same as Chainfires CW that comes with CF-Root and I know that Chainfires CW is optimized for Samsung phones (not to mention that they are not compatible with each other).
I guess my question would be is above that I did make sense, and shall I install CW from ROM Backup or get some CF-Root kernel with CW? I mean what do I lose with each solution, or any other advice how to complete ROM backup so that I can recover it if something, God forbid(knock on the wood), gets fishy?
Cheers
Click to expand...
Click to collapse
If you take some time and search different threads in xda developers forum, you will find many user posting statements not to use ROM manager.
As I do not use ROM manager at all, I did not read the whole posts. That's why I do not exactly know, what the issues are about ROM manager.
(Incompatibility with many ROMs and kernels, but there must be more issues.)
I am using CWM Manager app (included in Chainfire's CF-Root kernel) or CWM5 recovery mode to create a complete system / nandroid backup.
So, in case of an emergency I only have to flash a kernel containing CWM5 recovery and restore my last system backup.
Just to be on the "safe" side, I also copied my efs folder to my external sd card.
And all my apps (+ app data) are under Titanium Backup control.
So, I recommend to use plain CWM recovery backup.
If you are not sure about ROM manager, please search the forums and make up your own mind.
Good luck !
So basically, I can instead of Rom Manager install DarkyROM2 Tool, flash some kernel with CWM support e.g. Hellcat, CF-Root, and boot to recovery and make backup of current rom(with higher compatibility), right?
Sorry if this is obvious, but I have just started with this kind of tweaks...
Hello everyone,
I'm just about to go out of my mind, haha. I've successfully rooted my phone and I am interested in installing a new, custom ROM. However, I want to be 100% sure that I am not leading myself into the path of bricking. I have a couple questions that I think are basic enough, but haven't found an answer to anywhere online.
1.) Do I need a specific kernel and/or firmware in order to install a custom ROM?
2.) These are my specs for my phone
Android 2.3.3
Baseband: I9100DXKI1
Kernel: I9100DXKI2
Looking at my specs, will I be able to install this rom: http://forum.xda-developers.com/showthread.php?t=1198334 ?
Will any other ROM work for my phone? Now that it is rooted, am I freely able to install any ROM using clockworkmod or odin without having to change the kernels?
I'm very new to this and I'm hoping somoone can help me out with this.
Thanks a ton in advance!
Just rooting is not enough to install custom rom. You need to install clockworkmod recovery either through rom manager or flash a custom kernel which has CWM.
You can flash any kernel compatible with your device (for example, you cannot flash I9100G kernel/firmware on I9100 model).
You can get a lot of information here at xda. All the developers here are very friendly and co-operative.
You're good to go. Backup apps and some data using Titanium backup and/or My Backup Pro or something like those. Then boot into recovery, make a nandroid backup (can be found in the recovery menu), and flash the rom of your choice. You can flash any rom you like, just don't forget to wipe! This is also an option in recovery, wipe data/factory reset. You can also wipe dalvik-cache (found under 'advanced'). Have fun flashing!
Thanks for filling me in guys. I do have CWM installed on the phone, so I'll back up and try to flash. We'll see if I don't brick the phone somehow, haha.
roboedar said:
Thanks for filling me in guys. I do have CWM installed on the phone, so I'll back up and try to flash. We'll see if I don't brick the phone somehow, haha.
Click to expand...
Click to collapse
Well obviously you wont, all you can do with flashing a wrong rom is getting boot loop, you can always restore your previous rom via nandroid backup. Happy flashing
Hi everyone. I'm running Galaxy Ace, stock ROM Android 2.3.4
Never flashed a custom ROM before, so be gentle.
Phone already rooted (I have the superuser icon)
From reading threads here at xda, I have download these 3:
1. ClockWorkModAce.zip
2. recovery-clockwork-5.0.2.6-galaxyace-fix.zip
3. GT-I9100_ClockworkMod-Recovery_4.0.0.2.tar
I'm guessing number 3 is not for galaxy ace, right? So that leaves 1 and 2.
QUESTIONS:
1. Are 1 and 2 essentially the same thing? Which do you suggest I use?
2. These two files are on my laptop. Should I simply copy either one of them to my phone's sd card, turn off phone, boot into recovery by pressing home and power button simultaneously, select "Apply update from sd card", then select either ClockWorkModAce.zip or recovery-clockwork-5.0.2.6-galaxyace-fix.zip?
3. After installing either of the two files, and rebooting, would "nandroid" be on my phone then?
4. I believe nandroid backs up EVERYTHING into sd card (recovery image, right?). Can I then copy it to my thumb drive or laptop so I can erase it from the sd card?
5. If I want to get back to my stock ROM, is it done by booting into the custom recovery (like the clockworkmod) and selecting an option there?
6. After going back to stock ROM, how would I go back to stock recovery too?
7. For clarification, when you guys are saying cwm or clockworkmod, do you mean ROM Manager? Because a lot of guys are warning me against it! I just found out clockworkmod is the name of the developer, not the app.
8. From the ROM Manager page at market.android.com ,
Samsung users: You must flash a Clockwork compatible kernel first (see XDA forums)
Is this really necessary?? So much prerequisites! =P
9. Should I install ICS Beta Full on my Galaxy Ace Android 2.3.4???
10. Already rooted, so how much time will it take from installing cwm to installing the custom ROM? I want to know so I won't panic
11. If I install cwm, does the recovery automatically becomes the custom recovery?
12. What does a full wipe mean and do I do it with the stock recovery or with the custom recovery?
Please be as detailed as possible, and use small words.
Appreciate it guys!
Thanks a lot!
first zip is for cwm4 official one
second is cwm5.. i personally prefer cwm4 as had no problems with it
cwm5 failed to take backup when i tried to several times
and i have flashed all roms that claims to do it with cwm5 with cwm4 with no problems at all
you can copy backup images to laptop but DO NOT modify names of any folder as it will result in mismatch of md5 so copy directly folder as it is without modification
ROM MANAGER IS ***** DO NOT INSTALL ON SGA or else you loose your device damn
you can flash it on stock kernel as well
if you want to go back to stock rom from restoring backup then your backup must be taken after converting filesystem to ext4 or else it will fail..
so before backing up flash cf-root and convert fs to ext4 to save time of flashing stock from odin and then restoring backups
thats your option to install cm9 on phone as its not stable and needs many changes at this time.. if you are ok with bugs then you can
1. yes u should delete it. judging by the name its for sgs2, would brick ur phone instantly if flashing that one.
2. i dont really sure about cwm 5.0.2.6 (ur second file) either it can be flash from stock recovery or not but the cwm 4.0.0.6 (ur 1st file) definitely can. and i think its "install zip from sdcard" in stock recovery to flash it.
3. yes.
4. yes, its located in /sdcard/clockworkmod/backup.
5. yes.
6. by flashing stock rom via odin.
7. nope. here if we said cwm or clockworkmod, its referring to the recovery itself (clockworkmod recovery). rom manager is different thing, a tool used to flash cwm or rom. and yes, u should avoid it as countless sga already bricked because of it. and yes, clockworkmod is nickname of the guy who created it and named it as clockworkmod recovery, and here we just called it cwm.
8. again, avoid using rom manager
and u probably wanna read this
http://www.addictivetips.com/mobile/what-is-clockworkmod-recovery-and-how-to-use-it-on-android-complete-guide/
1.First one is official CWM recovery..Its v4..Second one is unofficial CWM recovery..Its v5..I didnt have any problem with them both..But,you should not rename the backups you take with cwm5,it will give you a md5 mismatch error when you do that..
2.Yes..Just copy the file to the sd card
3.Nandroid is a feature of CWM...So,yes.When you flash cwm,you get Nandroid backup
4.Yes...It backsup everything on your phone.But as amit said,Dont rename them
5.By stock,if what you mean is,an untouched Firmware,like the one you got from the factory..Yes..But if you are going to flash any roms,it may convert the system partition to ext4,which will result in a bootloop if you try to restore the stock you have now.So,a better option will be to flash with Odin
6.If you go back to stock,you would still have cwm as your recovery..If you want your stock recovery back,you will have to do a flash with Odin(But,trust me,You will never feel to go back to a complete stock rom and the stock recovery after you start playing around with the other cm7 roms
7.CWM is a recovery..ROM Manager is an application..ClockWorkMod recovery is not a developer..Koushik Dutta is the developer of both CWM recovery and Rom Manager..If you have any thought about using ROM manager,then i suggest that you clean that thought because ROM manager does NOT support Galaxy Ace and if you use ROM manager to flash a rom,you are going to BRICK your device
8.Nothing like that,from what i know.I never flashed any kernel Right after i rooted my ace,i flashed cwm recovery..I didnt do anything else
9.Its your choice..The Myth Ics is an awesome rom
phew....
Prawesome said:
1.First one is official CWM recovery..Its v4..Second one is unofficial CWM recovery..Its v5..I didnt have any problem with them both..But,you should not rename the backups you take with cwm5,it will give you a md5 mismatch error when you do that..
2.Yes..Just copy the file to the sd card
3.Nandroid is a feature of CWM...So,yes.When you flash cwm,you get Nandroid backup
4.Yes...It backsup everything on your phone.But as amit said,Dont rename them
5.By stock,if what you mean is,an untouched Firmware,like the one you got from the factory..Yes..But if you are going to flash any roms,it may convert the system partition to ext4,which will result in a bootloop if you try to restore the stock you have now.So,a better option will be to flash with Odin
6.If you go back to stock,you would still have cwm as your recovery..If you want your stock recovery back,you will have to do a flash with Odin(But,trust me,You will never feel to go back to a complete stock rom and the stock recovery after you start playing around with the other cm7 roms
7.CWM is a recovery..ROM Manager is an application..ClockWorkMod recovery is not a developer..Koushik Dutta is the developer of both CWM recovery and Rom Manager..If you have any thought about using ROM manager,then i suggest that you clean that thought because ROM manager does NOT support Galaxy Ace and if you use ROM manager to flash a rom,you are going to BRICK your device
8.Nothing like that,from what i know.I never flashed any kernel Right after i rooted my ace,i flashed cwm recovery..I didnt do anything else
9.Its your choice..The Myth Ics is an awesome rom
phew....
Click to expand...
Click to collapse
if you want to backupp your stock original firmware and want to restore wit cwm
download cf root
and then use ext4 manager
to convert system to ext4
then wen done you can backupp your stock original rom
and restore it with no problems ( ive used this a lot )
======================
SGSII styled rom
for galaxy ace
======================
The Serious MOD V1
fir galaxy ace
======================
The Serious MOD V0
for galaxy gio
======================
made by Robinandroid
about number 5 and using odin in general
Hi. Thanks a lot guys for your effort in helping out a newbie.
I'm a bit confused about using odin. Is odin like the "safer" way to flash ROMs?
I know I can flash a ROM via booting into recovery, then "install update from sd card", and selecting the ROM. Does Odin do the same thing? When exactly should Odin be used? Only when I want to go back to my original stock firmware AND the original/stock recovery?
Thanks!
As far I know, ODIN is only for flashing stock ROM's.
And well, even if it can be used to flash custom rom's,please do not use it. ODIN can brick your phone. Flashing via recovery is the most safest way
further clarification
Hey guys, thanks a lot. Please clear these up for me:
1. If I am now on stock ROM (never flashed a custom ROM before), then I flash a custom ROM like TheMyth ICS Beta 2 Full, and wish to go back to my stock ROM (which was backed up with clockworkmod recovery), do I simply boot into cwm recovery and restore the stock ROM or do I use Odin?
2. If I am now on stock ROM (never flashed a custom ROM before), then I flash a custom ROM like TheMyth ICS Beta 2 Full, and wish to try another custom ROM like cyanogenMod, should I just flash cyanogenMod with cwm recovery? Meaning, from TheMyth ICS Beta 2 Full straight to CyanogenMod via cwm recovery? Or do I have to go back to stock ROM, as well as stock recovery, by using Odin, and then flash cyangogenMod via stock recovery?
3. If I am now on stock ROM and wish to upgrade to an official android version thru samfirmware.com, do I simply flash it with the stock recovery or do I have to use Odin?
Thanks a lot guys!
1- yes
2- yes, straight away. no need to go to stock rom
3- odin
Hey guys,
actually I didn't want to create a thread for this as I thought I might resolve it myself or that I'll find the answer elsewhere.. But after 5 attempts with each different methods, I don't know what to try anymore.
I have the Xperia MIni (st15) and I want to try the Smultronic ROM. (http://forum.xda-developers.com/showthread.php?t=1796272). My attempts looked like this:
I flashed the ICS .587 stock ROM via Flashtool to get a clean thing to start with (including full wipe)
I root by flashing the .562 kernel, run the Doomlord script to gain root access and reflash the .587 stock kernel
I install CWM (xparts or cwm-install script, both works and doesn't make any difference)
I choose the smultronic 5.0 ".zip" in CWM (no wipe) and follow the instructions in Aroma installer. (Unlocked Bootloader chosen, as I have one).
The installation finishes successfully after a few seconds (!) and I am proposed to reboot.
The result of this is that my phone will get stuck at the SONY screen (>20 min.), which up to my knowledge means that there is no boot process for a ROM, just the bootloader showing it is alive.
I tried a bunch of things, like starting from a "used" stock ROM, fully wipe the system (+Dalvik) before starting the installation or choosing another Recovery installation method. No problem to recover any stock rom, but Smultronic still don't want to start when I try the above again.
I really feel a bit stupid, as this ROM is actually made for my particular device, and I don't manage to install it. Anyone finds the error?
Thanks a lot.
mobei said:
Hey guys,
actually I didn't want to create a thread for this as I thought I might resolve it myself or that I'll find the answer elsewhere.. But after 5 attempts with each different methods, I don't know what to try anymore.
I have the Xperia MIni (st15) and I want to try the Smultronic ROM. (http://forum.xda-developers.com/showthread.php?t=1796272). My attempts looked like this:
I flashed the ICS .587 stock ROM via Flashtool to get a clean thing to start with (including full wipe)
I root by flashing the .562 kernel, run the Doomlord script to gain root access and reflash the .587 stock kernel
I install CWM (xparts or cwm-install script, both works and doesn't make any difference)
I choose the smultronic 5.0 ".zip" in CWM (no wipe) and follow the instructions in Aroma installer. (Unlocked Bootloader chosen, as I have one).
The installation finishes successfully after a few seconds (!) and I am proposed to reboot.
The result of this is that my phone will get stuck at the SONY screen (>20 min.), which up to my knowledge means that there is no boot process for a ROM, just the bootloader showing it is alive.
I tried a bunch of things, like starting from a "used" stock ROM, fully wipe the system (+Dalvik) before starting the installation or choosing another Recovery installation method. No problem to recover any stock rom, but Smultronic still don't want to start when I try the above again.
I really feel a bit stupid, as this ROM is actually made for my particular device, and I don't manage to install it. Anyone finds the error?
Thanks a lot.
Click to expand...
Click to collapse
If your bootloader is unlocked, why are you using xparts to install cwm instead of a custom kernel?
To your problem, boot in cwm, do the wipe data/factory reset, install the rom, reboot and see what happens. If it's not working, flash another custom kernel or download an older version of the rom...
mobei said:
Hey guys,
actually I didn't want to create a thread for this as I thought I might resolve it myself or that I'll find the answer elsewhere.. But after 5 attempts with each different methods, I don't know what to try anymore.
I have the Xperia MIni (st15) and I want to try the Smultronic ROM. (http://forum.xda-developers.com/showthread.php?t=1796272). My attempts looked like this:
I flashed the ICS .587 stock ROM via Flashtool to get a clean thing to start with (including full wipe)
I root by flashing the .562 kernel, run the Doomlord script to gain root access and reflash the .587 stock kernel
I install CWM (xparts or cwm-install script, both works and doesn't make any difference)
I choose the smultronic 5.0 ".zip" in CWM (no wipe) and follow the instructions in Aroma installer. (Unlocked Bootloader chosen, as I have one).
The installation finishes successfully after a few seconds (!) and I am proposed to reboot.
The result of this is that my phone will get stuck at the SONY screen (>20 min.), which up to my knowledge means that there is no boot process for a ROM, just the bootloader showing it is alive.
I tried a bunch of things, like starting from a "used" stock ROM, fully wipe the system (+Dalvik) before starting the installation or choosing another Recovery installation method. No problem to recover any stock rom, but Smultronic still don't want to start when I try the above again.
I really feel a bit stupid, as this ROM is actually made for my particular device, and I don't manage to install it. Anyone finds the error?
Thanks a lot.
Click to expand...
Click to collapse
Download and flash a custom kernel which will work with the rom.. Try mesa kernel.. Flash it using flashtool... Now do complete wipe and install the rom again...
Sent from my WT19i using xda premium
Would the following work as a way to try out, for example Cyanogenmod 10. I am currently running a 4.1.2 install (pretty much stock just rooted/cwm via Philz as per the tutorial). I have a complete backup made via Philz recovery of this rom along with the kernel (which I believe is still stock from that) and efs.
1) Install a custom kernel (eg. dorimanx 9.x?) via the Philz recovery.
2) Install cm-10.2-20140102-NIGHTLY-i9100.zip.
3) To return to the original rom, reflash the original kernel (with whatever CWM is included in dorimanx) - then reflash the backed up rom via the same recovery?
I hope this is clear enough a question.
I believe you have to flash a stock rom through Odin, to return to complete stock. Just flashing a stock kernel isn't enough, and is surely not going to work (so don't do it).There are also tutorials how to remove the yellow triangle afterwards.
Please correct me if I'm wrong
Donnie Sins said:
I believe you have to flash a stock rom through Odin, to return to complete stock. Just flashing a stock kernel isn't enough, and is surely not going to work (so don't do it).There are also tutorials how to remove the yellow triangle afterwards.
Please correct me if I'm wrong
Click to expand...
Click to collapse
This is the part I'm most unsure of. Ideally I'm trying to figure out the process that lets me go from CM10.2 (and whatever recovery) to the point I am running the backed up rom rooted with PhilZ-cwm6-XWLSW-XEU-5.06.1-signed.zip again. Very confused on how to do so.
TopherBrink said:
This is the part I'm most unsure of. Ideally I'm trying to figure out the process that lets me go from CM10.2 (and whatever recovery) to the point I am running the backed up rom rooted with PhilZ-cwm6-XWLSW-XEU-5.06.1-signed.zip again. Very confused on how to do so.
Click to expand...
Click to collapse
Topher,
If you have rooted and cwm via philz, you already have a modified kernel installed. I believe the philz-cwm6 should be as close to stock kernel with the CWM incorporated. You don't need to add another kernel, because it will be replaced when you install the custom ROM. You should just be able to flash the cm10.2 via philz or via odin. You can then flash the dormanix kernel if you want - can't comment on that kernel - or if it has cwm included.
I would also suggest that you consider backing up you /efs folder (one with you imei information etc) prior to flashing any custom roms. People have been using hcKtool to do the backups and also an actual copy as well.
Depending on the custom rom, you may have connection problems with your network. So you may want to consider keeping a copy of your modem.bin file from your stock rom handy in case you need to flash onto the custom rom.
If you want to go back to stock, then you just need to flash the stock rom - you can check sammobile website for your stock rom or use the backup that you made.
I should point out that I have yet to do any of the above - I gathered this from reading the forums. Some more experienced forum users can add corrections. I rooted my phone a couple of months ago and now considering installing custom rom in the next couple of months.
Thanks.
if u flash a custom rom (cm10.2 for example), it already included kernel as well. so if u want to try out other custom kernel, i can flash it after you are done flashing a custom rom but make sure it is compatible with your android version. (u cant use custom kernel that not support android 4.3 with a custom rom running android 4.3)