I odined back to stock from cm7.1 and in stock recovery gives me a count mount dev/datadata (file exists). Any suggestions anyone?
Did you ODIN to JFD?
Sure you used the correct Tar and Pit?
Sure you did PDA and not Phone?
Did you check/tick the repartition box?
---------- Post added at 11:27 PM ---------- Previous post was at 11:22 PM ----------
Here's a good guide, with files. Just in case...
http://forum.xda-developers.com/showthread.php?p=13132341#post13132341
So my suggestion would be ODIN again
I used ji6 odin. Correct pit and used PDA partition not checked. Odin finished and phone rebooted into recovery and gave me the could not mount the dev/memblc0/datadata or something like that. I have odin'd at least twenty times already and never had this issue
Sent from my SGH-T959 using xda premium
I've never ODIN'd to JI6, so I don't know if checking repartition will help.
But I do know that coming from CM7 back to stock, ODINing to JFD, I DO check repartition. CM7 uses MTD Partition Table...it just seems like the right thing to do. I'm not sure if checking the box actually does anything different, I just know that I do it, and it works. (also, it's suggested in that guide above)
I've had such good luck with JFD, that's the only thing I can really recommend.
Jfd worked. Everything is good. Your link to that thread gave me some info that helped me. Thank you much!
Sent from my SGH-T959 using XDA App
Related
i used the guide for the unbricking the fascinate and the files that came along with it. the files were I used dl09.tar.md5 and atlas pit 2.2. odin 1.7 and even 1.3. I checked all the right boxes and even checked the hash. when i boot up, however, it takes me back to the original samsung's recovery and thats it. what am i doing wrong? am i using the wrong image?
There is a post some where containing an all in one stock di01 odin file. I would link but I am on my mobile app. Just search di01 you should find it.
Sent from my SCH-I500 using XDA App
http://adbdev.com/danknub/Stock-i500-VZW-System.tar.md5
Thats the stock odin, good luck!
Sent from my SCH-I500 using XDA App
thank you!! hope it works
will repartitioning with odin and doing a flash to stock remove present
kernels from phone.
To properly repartition you must use one of the official vzw .tar files either dl09 or eb01 and you must have the atlas 2.2pit file and the repartition box needs to be checked...that will make sure you correctly repartition...and in doing so your kernel will be replaced along with deleting root, cwm and any user data that you may have
Sent from my SCH-I500 using XDA App
efan450 said:
To properly repartition you must use one of the official vzw .tar files either dl09 or eb01 and you must have the atlas 2.2pit file and the repartition box needs to be checked...that will make sure you correctly repartition...and in doing so your kernel will be replaced along with deleting root, cwm and any user data that you may have
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
Also worth noting that some (not all) of these stock odin packages will revert your modem as well. If you follow these instructions you *should* be stock everything.
man i wish that was the case. however, atm i cannot connect my 3g. do you think the modem has something to with this? (btw its the modem that will affect it right?)
Yes the modem is your 3g. If you are having issues try *228 option 2 a few times. If that doesn't fix it Odin back to stock. There is a thread in the general section that has everything you need including instructions for Odin. Use the pit file and one of the Odin files there for coming off of cm7 and you will be completely back to stock, everything wiped and reinstalled.
Sent from my EC09 UKB GB Fascinate.
Dale you are the man..3g works now..THANK YOU
Sent from my SCH-I500 using XDA App
Ok so I was in the process of trying to install CM7 from Superclean 2.9.2 and tried installing CM7 through CWM (red). Didn't work...so I tried installing the fixes for the recoveries in case it didn't work via Odin...
My phone stayed in the boot animation screen the whole way rebooting into the same animation...
So i flashed dl01 all in one to get it to stock...tried reading up and saw that I was supposed to re-partition with atlas v2.2.pit through odin in conjunction with a full stock app...
everytime I flash something with atlas 2.2 ...it always ends up booting into blue recovery with no way to boot into phone. I've tried the Stock DL09 and I've tried it with the dl01 all in one package...no cigar...
At one point I thought it worked and I saw the boot animation with the cyanogenmod logo...but it errored and kept booting into error in which I could only catch a glimpse of the words...some include "mount"
How can I fix this and be able to install Cyanogenmod 7? Please include step by step...I am aware that it is noob to ask such things, but I've tried searching and came up with solutions that didn't work for me.
Thank You
Did you have "re-partition" checked in Odin when using Atlas? Also, double check the MD5 on the .pit in case the download was corrupted.
Sent from my SCH-I500 using XDA Premium App
Reflash that .pit file with a froyo odin file. EB01 or ED01 will work. Then boot up fully. Then flash the dl09 odin file by itself, no .pit then boot OTA and profit.........
Just a heads up. Dont flash a froyo .pit file with an eclair .tar file. Youll boot into recovery evertime.
Just do what I said and youll be good.
check the repartition box and odin the atlas file first(wait for "pass"message)
reset odin
put phone in download mode again
odin dlo9 or eb01 package (no repartition)
Quick caveat on going OTA from DL09: VZW's updates now skip ED01 entirely and go direct to ED04. Keep this in mind if you prefer ED01
Sent from my SCH-I500 using XDA Premium App
laureanop said:
check the repartition box and odin the atlas file first(wait for "pass"message)
reset odin
put phone in download mode again
odin dlo9 or eb01 package (no repartition)
Click to expand...
Click to collapse
This might work too. but I havnt tried it. I did same thing as you and was told by adryn how to get phone booted back up. This was awhile ago tho..... Good luck.
Sent from my SCH-I500 using XDA App
Jazz848 said:
Quick caveat on going OTA from DL09: VZW's updates now skip ED01 entirely and go direct to ED04. Keep this in mind if you prefer ED01
Sent from my SCH-I500 using XDA Premium App
Click to expand...
Click to collapse
That is true. But you prob want ec09 radio anyway. Best ive used...
Sent from my SCH-I500 using XDA App
no ec09 radio for me anymore. I was running cm7 and decided to install ec09. Stuff started disappearing from my sd card (I mean like entire huge folders). I'm sticking with the EDs
Just re-read OP and noticed you asked for step-by-step. There are a few guides out there, but this one by kidserious is the most up-to-date one I've found and it has yet to give me a single issue: Hope this helps!
EDIT: When using the aforementioned guide, I have always used the DL09 .tar and cannot speak for the EB01 .tar. YMMV
I have been messing with my phone alot lately and have had a bunch of issues(not booting, boot loop, different colore recoveries). So I put together a little folder for myself that gets me back to ED01 TW Debloated and OTB 1.6 kernel. If you would like me to post it or send you the folder with everything you need I can. at work now so it wouldnt be till later tonight
So I've tried starting off with kidserious's way of returning to stock...and it seemed to have worked for me because I was able to see the logo with no problem booting into recovery (red).
But when I tried installing CM7 Test Build 10 via CWM, and it didn't work...it went into repeat boot (blue) and before it started doing that after I saw "Installation aborted"
I'm actually now at a stump of how to install CM7 now...
If your using the DI01 file in ODIN you dont need to have the .pit file. Its a full stock ODIN it already has it. If you flash that to eclair your fine.
Fasinationinmotion said:
If your using the DI01 file in ODIN you dont need to have the .pit file. Its a full stock ODIN it already has it. If you flash that to eclair your fine.
Click to expand...
Click to collapse
I apologize, but I'm confused by this. It's my understanding that the .pit is necessary if you're coming from a Voodoo setup. Are you saying that the DL01 .tar reverts the file system to stock on its own? Not challenging you, per se, just making sure I understand properly.
Sent from my SCH-I500 using XDA Premium App
Jazz848 said:
I apologize, but I'm confused by this. It's my understanding that the .pit is necessary if you're coming from a Voodoo setup. Are you saying that the DL01 .tar reverts the file system to stock on its own? Not challenging you, per se, just making sure I understand properly.
Sent from my SCH-I500 using XDA Premium App
Click to expand...
Click to collapse
You've got it right, thats the whole reason for using the atlas and repartition checked, it's to format everything back to rfs(non voodoo) from ext4.( voodoo) or in this case mtd
This it's especially important when coming from an mtd build..ie. Cm7 and going back to an old rfs or ext4 rom. I'm no dev, just a flash a holic but I think of it like this, voodoo is just a lag fix modification of our original rfs(non voodoo) format, while mtd is a completely different format so we no longer have the luxury of a recovery that supports this ability to enable and disable our lag fix (voodoo)...which your new mtd format doesn't support. I don't even think it is possible to make a recovery that will repartition your system in preparation to flash any rom format you want
Again I am no dev and this is how I think of it to make sure I take the appropriate steps...it's just my way of remembering what to do when flashing
This is why every time you want to go back from an mtd build you must repartition with the atlas 2.2 to re format your previous mtd format back to the original rfs
Everyone I've helped with issues going from mtd to rfs/ext4 or vice versa I always suggest
rfs (non voodoo)--->mtd
Odin the 3-30 fix all recovery...immediately boot to cwr
wipe everything and flash newest cm7...(I used the 7/4 build but I see it's no longer available but the newest one works too) and reboot
power button menu to recovery...flash gapps/mtd kernels/misc.zip files you may also have with out wiping and reboot.
odin desired radio...reboot.. done.
Mtd---> rfs/ext4
Odin vzw eb01 with atlas 2.2pit and repartition checked
Fully reboot...then pull batt.
Odin desired recovery..(I still use 3-30 fix all cwr).....immediately three finger boot to cwr wipe everything and flash new rom/kernel (voodoo our non voodoo)...reboot
Hasnt done me wrong yet...no fc...no boot loops just flash a holic goodness!
Sent from my SCH-I500 using XDA App
go to this thread, read about the files you need, flash back to stock. here
Then root, install CWR, follow part of odin heimdall guide on how to keep root on ed builds, then get jt's Cyanogen MTD, supposed to have install issues fixed. here
Hope this gets you what you are looking for.
leonvx671 said:
At one point I thought it worked and I saw the boot animation with the cyanogenmod logo...but it errored and kept booting into error in which I could only catch a glimpse of the words...some include "mount"
Click to expand...
Click to collapse
That happened to me. The download was corrupted. I odined EB01 then odined jt's new recovery, redownloaded cm7, and reflashed.
Sent from my SCH-I500 using XDA App
GrainOsand said:
Reflash that .pit file with a froyo odin file. EB01 or ED01 will work. Then boot up fully. Then flash the dl09 odin file by itself, no .pit then boot OTA and profit.........
Just a heads up. Dont flash a froyo .pit file with an eclair .tar file. Youll boot into recovery evertime.
Just do what I said and youll be good.
Click to expand...
Click to collapse
Please help! I have tried this numerous times, and my phone just keeps booting into stock recovery. It won't let me get past it.
I originally tried the .pit file with dl09 (mistake - I know), and it started the recovery mess. Then I downloaded the "stock" rooted eb01 file (EB01_DXC.tar.md5), and flashed it with the .pit file (atlas v2.2) and re-partition checked.
I have no other clue what's going on. I was just trying to wipe completely fresh to be able to load the CM7 Espresso on my phone. I've been running old CM7's for a while with the glitch kernels.
Help, please - I've been without a phone for the past 2 days. A huge thanks to anyone that can help me out!
I only use the DL01 or the ED05 stock packages. I think you should try those. I restored my phone when I was running SuperClean w/Voodoo with the DL01 package, no pit file.
Here is a link to ED05
OhioYJ said:
I only use the DL01 or the ED05 stock packages. I think you should try those. I restored my phone when I was running SuperClean w/Voodoo with the DL01 package, no pit file.
Here is a link to ED05
Click to expand...
Click to collapse
I'm scared that I've already messed something up by using the pit file, because I actually had the full dl01 file, and nothing. Not really sure what would be different about the ed05 file. I mean, I'm gonna try it, but does any one else have a suggestion? Thanks.
brettdacosta said:
Please help! I have tried this numerous times, and my phone just keeps booting into stock recovery. It won't let me get past it.
I originally tried the .pit file with dl09 (mistake - I know), and it started the recovery mess. Then I downloaded the "stock" rooted eb01 file (EB01_DXC.tar.md5), and flashed it with the .pit file (atlas v2.2) and re-partition checked.
I have no other clue what's going on. I was just trying to wipe completely fresh to be able to load the CM7 Espresso on my phone. I've been running old CM7's for a while with the glitch kernels.
Help, please - I've been without a phone for the past 2 days. A huge thanks to anyone that can help me out!
Click to expand...
Click to collapse
a pit file is a pit file, they are no different for eclair or froyo from my understanding. I have no problems odin dl09 w/ pit...I actually got that tip from the stickies on the galaxy s forums.
http://www.galaxyforums.net/forum/fascinate-rs-guides/2911-how-upgrade-cyanogenmod7.html
as you can see by reading the link alot, there are alot of different guides out there with different methods and I have tried them all... Thats why I created my own guide with pieces from all the other guides that I felt worked the best. My best advice to you is spend alot of time doing research and form your own opinion on what works best. DO NOT take one posters advice as it being the correct way because there is alot of misinformation on teh internet!!
Here is what happened. Flashed voodoo lag fix, Didnt notice any difference after 3-4 days. Then tried to flash back to stock(eclare). Here is where im stuck at, it wouldnt boot up using the stock eclare, So I tried one of the tuts here that said to use eugene rom. I used the pit 52 file+ eugene rom. Flashed those using oden, phone boots up fine, but I now have the not enough space problem when attempting to dl apps from the app store. When I reboot my phone after I have tried to use the market, the market app disappears. Ive tried using other roms and nothing works.
Every time I flash a rom I get "data failed to whipe" on first reboot.
Find a ROM you want and in recovery wipe cache, dalvik cache, wipe data, format system in mounts and storage then flash the ROM and see if that clears things up.
sent from the depths of helly bean
---------- Post added at 08:38 PM ---------- Previous post was at 08:36 PM ----------
BTW, what ROM were you running before?
sent from the depths of helly bean
---------- Post added at 08:39 PM ---------- Previous post was at 08:38 PM ----------
Just saw this in another thread, it might help you.
Google eugenes froyo that does not brick, read the op carefully, because after you odin the tar file, you will have an error message, thats ok, odin eclair and you should pass.
Read it 10 times, you'll reboot in cwm with an error message, ok, reboot, download, eclair.
sent from the depths of helly bean
samsgun357 said:
Find a ROM you want and in recovery wipe cache, dalvik cache, wipe data, format system in mounts and storage then flash the ROM and see if that clears things up.
sent from the depths of helly bean
---------- Post added at 08:38 PM ---------- Previous post was at 08:36 PM ----------
BTW, what ROM were you running before?
sent from the depths of helly bean
---------- Post added at 08:39 PM ---------- Previous post was at 08:38 PM ----------
Just saw this in another thread, it might help you.
The only rom that will boot up is
Google eugenes froyo that does not brick, read the op carefully, because after you odin the tar file, you will have an error message, thats ok, odin eclair and you should pass.
Read it 10 times, you'll reboot in cwm with an error message, ok, reboot, download, eclair.
sent from the depths of helly bean
Click to expand...
Click to collapse
The only rom that will boot is "eugenes froyo that does not brick". All others boot to the vibrant/samsung screen then to black screen where only the bottom 4 buttons light up, but nothing happens.
I was on the stock eclare rom.
Its also saying there isnt a partition for app2SD. Any way to fix this?
Have you tried this tar? I use it instead of flashing to eclair as most of eugenes roms repartition...XDA search for a link to this... Eugene_2E_JK2_froyo.tar.
Sugartibbs said:
Have you tried this tar? I use it instead of flashing to eclair as most of eugenes roms repartition...XDA search for a link to this... Eugene_2E_JK2_froyo.tar.
Click to expand...
Click to collapse
Thats the one Ive been using, if there is a tut to fix the vibrant on here, Ive already tried it.
I dont think thats the one, the eugene I use is Eugene373_samsungS_froyo_pda.zip, and it wont reboot, it will take you to recovery with an error message. you pull the battery, enter download, then odin eclair. Ive used it for corrupted flashes that result in failed odin rewrites to stock. Search that pda and it will take to a 4share download.
Sugartibbs said:
I dont think thats the one, the eugene I use is Eugene373_samsungS_froyo_pda.zip, and it wont reboot, it will take you to recovery with an error message. you pull the battery, enter download, then odin eclair. Ive used it for corrupted flashes that result in failed odin rewrites to stock. Search that pda and it will take to a 4share download.
Click to expand...
Click to collapse
That worked perfectly. Thx
Hey guys I had just started to think that I had seen it all but it turns out that I havnt. So let me start off by saying I've tried following this guide here: http://forum.xda-developers.com/showthread.php?t=1026746
To get back to stock but when I boot I get to the lock screen and all is fine but when I go to unlock the phone and get to the os around 5 different things force close ranging from touch wiz to settings and to google app packages and I also get a system UID inconstant error and asks if im feeling lucky (but it does matter because I cant get to the home screen seeing as that touch wiz is force closeting constantly) . So... (Deep Breath) I have tryed wiping (factory data reset), wiping cashe partition and dalvik also formating everything I can in the advanced tab in CWM. So please give me and hand with my issue and if you have a file i need to download please post a link with it.
Thanks
riom4 said:
Hey guys I had just started to think that I had seen it all but it turns out that I havnt. So let me start off by saying I've tried following this guide here: http://forum.xda-developers.com/showthread.php?t=1026746
To get back to stock but when I boot I get to the lock screen and all is fine but when I go to unlock the phone and get to the os around 5 different things force close ranging from touch wiz to settings and to google app packages and I also get a system UID inconstant error and asks if im feeling lucky (but it does matter because I cant get to the home screen seeing as that touch wiz is force closeting constantly) . So... (Deep Breath) I have tryed wiping (factory data reset), wiping cashe partition and dalvik also formating everything I can in the advanced tab in CWM. So please give me and hand with my issue and if you have a file i need to download please post a link with it.
Thanks
Click to expand...
Click to collapse
I'll say just use ODIN. Download the program, EH03 (if you're Verizon), and PIT v2.2. If you need additional help use this link.
http://forum.xda-developers.com/showthread.php?t=1026746
AdelosMeansUnknown said:
I'll say just use ODIN. Download the program, EH03 (if you're Verizon), and PIT v2.2. If you need additional help use this link.
http://forum.xda-developers.com/showthread.php?t=1026746
Click to expand...
Click to collapse
I've already tryed odin and uing the pit it boots but has tons of fcs and errors
If you can find the stock eclair ROM (2.1) it might be worth flashing. It has a 2.1 pit that seems to format more completely and works better for me, then I odin GB with 2.2 pit. I seem to have trouble reformatting with 2.2 .pit and 2.1 .pit works every time. 2.1 pit file is also the only one that will correctly fix ext formatting such as voodoo lagfix. I'm on us cellular so my files won't help.
Sent from my SCH-I500 using xda premium
mezster said:
If you can find the stock eclair ROM (2.1) it might be worth flashing. It has a 2.1 pit that seems to format more completely and works better for me, then I odin GB with 2.2 pit. I seem to have trouble reformatting with 2.2 .pit and 2.1 .pit works every time. 2.1 pit file is also the only one that will correctly fix ext formatting such as voodoo lagfix. I'm on us cellular so my files won't help.
Sent from my SCH-I500 using xda premium
Click to expand...
Click to collapse
hey if you dont mind later could you link me to the 2.1 pit i think that i can find it but just in case. thanks for the advice i will post with results
You should definitely take a look at DROIDSTYLES GUIDE. Its in the General section.
Sent from my GT-I9300 using xda app-developers app
Dl01 2.1 eclair file is here, I would download all those fassy stock ROMs for future needs:
http://forum.xda-developers.com/showthread.php?t=1526488
The pit he has linked is 2.2.2. If that doesn't work I have 2.2.1 here:
http://db.tt/KfdoMJo9
Report back please. Hope this helps.
Sent from my SCH-I500 using xda premium
mezster said:
Dl01 2.1 eclair file is here, I would download all those fassy stock ROMs for future needs:
http://forum.xda-developers.com/showthread.php?t=1526488
The pit he has linked is 2.2.2. If that doesn't work I have 2.2.1 here:
http://db.tt/KfdoMJo9
Report back please. Hope this helps.
Sent from my SCH-I500 using xda premium
Click to expand...
Click to collapse
Ok im pushing now using your 2.2.1 pit i guess if this doesn't work i could try heimdall but i have never used it before and am skeptical to so wish my luck if this doesn't work ill report back
I didn't see you mention it in your earlier posts but are you making sure re-partition is checked in odin when flashing stock ROM with pit file? If not, do it. If so, disregard.
Sent from my SCH-I500 using xda premium
mezster said:
I didn't see you mention it in your earlier posts but are you making sure re-partition is checked in odin when flashing stock ROM with pit file? If not, do it. If so, disregard.
Sent from my SCH-I500 using xda premium
Click to expand...
Click to collapse
Yup its selected just and update i tryed the 2.2.1 pit with 2.1 and odin stopped working each time i tryed it and then i tryed 2.2.2 pit and it would "boot" but the screen wouldn't turn on im trying 2.2 pit now
Never mind I read your post wrong.
Sent from my SCH-I500 using xda premium
riom4 said:
Yup its selected just and update i tryed the 2.2.1 pit with 2.1 and odin stopped working each time i tryed it and then i tryed 2.2.2 pit and it would "boot" but the screen wouldn't turn on im trying 2.2 pit now
Click to expand...
Click to collapse
just an update i tryed the 2.2 2.2.1 and 2.2.2 pits and none of them worked I also tryed without the pit and got the same result so now im going to try with gingerbread
wish me luck
riom4 said:
just an update i tryed the 2.2 2.2.1 and 2.2.2 pits and none of them worked I also tryed without the pit and got the same result so now im going to try with gingerbread
wish me luck
Click to expand...
Click to collapse
Fingers crossed
Sent from my SCH-I500 using xda premium
mezster said:
Fingers crossed
Sent from my SCH-I500 using xda premium
Click to expand...
Click to collapse
nope nothing worked trying to wipe everything but i went to wipe /system but it said I couldn't because it wasn't able to unmount it so im going to wipe every thing and do an old nan-droid and see if i can get it to work. otherwise any ideas???
Heimdall? People have reported success with it when Odin fails. Never used it myself.
Sent from my SCH-I500 using xda premium
mezster said:
Heimdall? People have reported success with it when Odin fails. Never used it myself.
Sent from my SCH-I500 using xda premium
Click to expand...
Click to collapse
ill give it a shot later to tired to think now so yea.... stay tuned for an adventure
ok so I made some progress I got cm 7.1 to boot up okay but in settings>storage and under internal storage it says total space 0.00b and available space 0.00b so what do i do?
Can you tell us exactly what steps you're using when you use Odin? I noticed the guide you linked to in the OP was a really old sticky. Droidstyle's Guide is the only one that is currently up to date. It doesn't mean you've done anything wrong with Odin, I just want to make sure you have the files in all the right places and the correct check boxes checked.
Please post questions in Q&A
Thread moved
Thank you for your cooperation
Friendly Neighborhood Moderator