Related
I did all that rooting crap. Now when I press the power putton, it flashes the "Samsung Vibrant" Image, then plays the tmobile tone, but no "S" image appears. And it stays black. How do I fix this?
define "all the rooting crap"? Did you flash a Voodoo Rom and try to flash something else on top of it?
There is NO way to tell you what you need to do unless you tell us what you did.
But based on what you have described.. Gonna say u are SOL.
Use odin to flash stock rom then start over. I have been stuck on that screen a couple times. Lol
Sent from my SGH-T959 using XDA App
Truth be told
Anthony is right. i had this issue earlier this week when trying to flash a mod to my phone. Odin is the only choice at this point.
This has happened to me twice, most recently after "fixing permissions" in the oclf market program. Both times I've rectified by booting into recovery and "reinstall packages". Both times I also removed sim and sd and after a couple repetitions of package reinstall it comes back to life. Maybe dumb luck, maybe not, worked twice...
Sent from my SGH-T959 using XDA App
Correction, fixing permissions in Rom Manager...
Sent from my SGH-T959 using XDA App
Also...My Vibrant Wont Turn On
Dear All
I am new to this forum and need some assistance. I recently bought a T-Mobile Vibrant from a friend who had brought it with him for the US. I am using it in the Middle East where I live at the moment.
I have been reading a lot in the past few weeks about the Vibrant and almost everything there is to know. It seems there is always more to discover.
Back to the issue at hand. I had been having problems with getting my phone to reboot into recovery mode but I finally managed to do so last night. I wanted to flash my phone with Axura 2.1E, Nero V2 or the Macnut v14, so I can use the the Black Froyo theme on it.
First, I flashed the original firmware (T959...JDF) which I got off your site, using Odin v1.3. That worked as it should. Then I proceeded to follow instructions to download the ClockworkMod from this thread: [RECOVERY] ClockworkMod Recovery for Vibrant (FINAL! SAFE!)
After I copied the CWM file to the Internal sd card, I downloaded Rom Manager, rooted the phone with Z4root, chose the Samsung Vibrant in Rom manager and clicked install ROM from sd card. it rebooted into recover mode (blue writting), I clicked 'reinstall packages', which it did and it rebooted into the ROM recovery mode (green writting). I chose the option to install zip file from sd card, then chose Axura 2.1E and it installed until it said complete.
So far everything was working as it should, or at least that was the impression I got. I am not sure of this next step. It said installation complete, so i chose 'go back', then 'reboot device'. When it went into reboot, nothing happened...just a black screen. It wont start, neither normally, not into any other mode (recovery or download). i plugged it into the charger and not even the battery icon would come up. i assume that it is...'dead' and I just did the impossible. I tried several ways and combinations to get it back to life somehow, but I have a feeling that's it.
Any suggestions, advice, remedies, whatever help...even condolences would be much appreciated..
Much appreciated and all the best to all.
Cheers
What the heck is up with all these HARD BRICKs?
Past few days, I keep reading people who have appeared to truely HARD BRICK their phone.
Meaning they can not get into download mode, they can not use odin, they are truely hard bricked.
What is up with the sudden surge of hard bricks.
This guy sounds like he did everything correct.
Scary.
Ya I've seen a lot of those also... could it be a newer version of the Vibrant? Yes he did everything correctly... he could try a jig.. its only maybe 10 bucks? worth a try at least...
My Vibrant wont turn on
Thanks guys for the reply to my post. I was thinking today that even though I did follow instructions correctly, that I might have missed a step at the end.
My thoughts went to the fact that after the installation of my chosen ROM (Axura 2.1E) was complete, I was given the choice of installing update.zip again, along with some other ones which I forgot what they were and the option to 'go back'. I went 'back' and pressed reboot device.
If the installation was fully complete, would not the phone go into automatic reboot?
Anyways seem like the boot is screwed and I am getting help from a friend to get it back to life again.
Anyone can confirm what to do after I install a 'ROM' successfully. Is there another step afterwards which I must be aware of to fully complete the flash?
Cheers again
Hey I got a old stock rom from off one of these forms off xda... for my samsung vibrant... After i flash the rom odin said reset and the vibrant never turned on.... its been like this for a day now... the battery sign dosent even turn on... what can i do..
hellobitchdog said:
Hey I got a old stock rom from off one of these forms off xda... for my samsung vibrant... After i flash the rom odin said reset and the vibrant never turned on.... its been like this for a day now... the battery sign dosent even turn on... what can i do..
Click to expand...
Click to collapse
Get into download mode try again,
if not try getting the files from a different source
Sent from my SGH-T959 using XDA App
Sent from my SGH-T959 using XDA App
Hey everyone...
I need help.. And its not my phone nor do i have it in my possession... Kinda troubleshooting over the phone... My nephew got a samsung vibrant... Got his phone rooted and had Darky's v7.7 Gingerbread Edition rom running... It booted up ran for a bit had a LOGSPROVIDER error stopped unexeptedly message....
He shut the phone off then rebooted and it wont boot past the first boot screen... HE also cant get into recovery but download mode works fine..
Possible solutions..?
Well if he can get into download mode the he should just odin back to stock and reinstall the rom!
Sent from my SGH-T959 using XDA App
Thats what I was thinking... Im not familiar with samsung phones.. Whats the purpose of download mode?
Safety feature? I presume..
I find it odd though that it booted fine and was ok until he rebooted and it wouldnt load... Any specific reason that could happen
Nah if you read the disclaimers devs put up it clearly says "i am not responsible for bricking, etc."
So no, there should be no specific reason why your nephews phone won't boot, more unless he was running a lag fix and flashed the wrong zip or whatever then yeah...
But download mode is I guess a fail-safe for samsung if the phone bricks or anything, afterall the vibrant is nearly impossible to fully brick
Sent from my SGH-T959 using XDA App
Thank You for the help...
He opted to call tmo and there sending a replacement.. Then asked him if he bricked the phone... He played dumb.. and said he rebooted the phone and it wouldnt load...
And yes i know about the devs disclosure... Got myself a mytouch slide which just finally got s-off courtesy of ALPHAREV woohoo.. Also have a G1 from back when it first came out.. SO i got plenty of rom downloading under my belt
hellobitchdog said:
Hey I got a old stock rom from off one of these forms off xda... for my samsung vibrant... After i flash the rom odin said reset and the vibrant never turned on.... its been like this for a day now... the battery sign dosent even turn on... what can i do..
Click to expand...
Click to collapse
This same thing happened to me. I read about making a jig, yeah right. So I continued for the better part of three hours plugged into my computer with data cable continuing the same motion that I would to get into download mode. And finally I got the download dude. I used the s1.odin somthing .pit file I think it was the first .pit to come out. Not the 512.pit Along with the first .jar. Anyway keep trying to get into download mode even with a black screen, can be done.
Sent from my SGH-T959 using XDA App
I tried to Odin to stock T-Mo but I cant get passed the Galaxy S boot screen. It just goes black and if I touch the buttons they light up but phone stays black. I tried a number of times also clicked on repartition in Odin. Odin tells me everything passed but when the phones boots ROM Manager screen comes up goes through a check list with one line in red that reads "Data wipe Failed"
Can someone please help me out. Ran Odin many times but I cant get the phone to go back to full stock. I click repartition but it seems Odin does not wipe the internal SD. I am so vexed. Someone help
I have never partitioned. Or whatever. That can cause a soft brick.
Sent from my SGH-T959 using XDA App
I have before in it went well. The phone (my wifes) was bricked to begin with. It would not go past the white vibrant screen. So I Odined back to stock. It goes through the T Mo stick together screen then gets to the Galaxy S animation. But after the galaxy s logo he screen turns black and only if I touch the buttons to the buttons light up. I tried to reflash via Odin a number of times but I cant get the phone to fully boot.
What ROM you had before going back to stock?
Any lagfix? If yes disable it..
Sent from my SGH-T959 using XDA App
You should do it again. No repartition. Wipe data. Dont touch it. Odin will boot up the phone when its fully done.
Sent from my SGH-T959 using XDA App
Ive done this several times. Works everytime
Sent from my SGH-T959 using XDA App
Try eugenes froyo that doesn't brick then reset odin and then go to stock firmware I mean it couldn't really hurt anything
willsnews said:
Try eugenes froyo that doesn't brick then reset odin and then go to stock firmware I mean it couldn't really hurt anything
Click to expand...
Click to collapse
Okay it also accured to me to try Eugenes. So I did and it worked. But I can not install any programs. It tells me there is not enough space. Then when I look at settings/storage on the bottom it reads 0 space for apps.
Strange no? Any ideas
Thanks to everyone so far. I really appreciate it!
As I understand it as soon as you odin eugenes froyo you have to reset odin get the phone into dl mode again then use odin to put in the stock firmware
samyvibrantuser said:
What ROM you had before going back to stock?
Any lagfix? If yes disable it..
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
he female voice came on, everything went well but when the phone went to reboot it got hung up on the white vibrant screen. So I tried to Odin to JDF stock. Then it would get passed the galaxy S animation and go black screen.
Eugenes froyo works but my app storage is at 0.
arrggg!
willsnews said:
As I understand it as soon as you odin eugenes froyo you have to reset odin get the phone into dl mode again then use odin to put in the stock firmware
Click to expand...
Click to collapse
Damn. I tried but it doesnt want to flash back to stock. When I flash stock the I get the same results. Phone goes black after the galaxy s animation
Anyone? Any ideas? I have been at this for four hours
samyvibrantuser said:
What ROM you had before going back to stock?
Any lagfix? If yes disable it..
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
I was unable to disable voodoo because it would not boot the first time. (and just to be clear. I was on stock eclair and used JOC kernel/uv/voodoo
stock eclair and used JOC kernel/uv/voodoo
Thats good stuff I rocked it for a while
willsnews said:
stock eclair and used JOC kernel/uv/voodoo
Thats good stuff I rocked it for a while
Click to expand...
Click to collapse
Yeah. Tried it on this phone which is my wifes and it bricked for some reason.
You gotta find a way to disable voodoo. Theres a way to disable it by putting something directly into the Voodoo folder but I cant find it =/
Charlie Brown said:
Yeah. Tried it on this phone which is my wifes and it bricked for some reason.
Click to expand...
Click to collapse
Jacs kernel always gave me bricks for some reason. Do what they said again. Flash to eugenes froyo that doesnt brick with repartition checked. Then RIGHT AWAY make sure you have the jfd rom for odin and flash that using odin with repartition unchecked. Dont try to flash a clockwork recovery rom from eugenes froyo that doesnt brick because you arent done fixing it at that point.
Sent from my SGH-T959 using XDA App
once this is fixed if you want voodoo, upgrade to a 2.2 rom and use supercurios own modified kernels. Never had a problem with them.
Sent from my SGH-T959 using XDA App
Settai said:
You gotta find a way to disable voodoo. Theres a way to disable it by putting something directly into the Voodoo folder but I cant find it =/
Click to expand...
Click to collapse
I cant get to the voodoo folder. I tried every firmware there is and only Eugenes froyo will fully boot. But I cant install any apps so I can get to me system folders so i can see whats going on.
Im so stressed and tired it aint funny.
When I flash a T Mo rom and the phone reboots and goes through a series of line checks (yellow text) I get red text that reads "data wipe failed". Then the phone boots, t mo jingle, then galaxy s screen, then black.
Anyone??? Devs? PLease?
Do you have root explorer?
Installed the DoW kernel over Bionix-v and wound up in a boot loop, unable to get into recovery, but I was able to get into download mode. Tried using ODIN to flash back to stock, but it won't boot past the 1st Vibrant splash screen.
The ONLY rom I've been able to boot is Eugene's JK2+2e Froyo ROM, but it's not recognizing both the internal and external storage (shows unavailable). I'm assuming this is due to ODINing with voodoo enabled, so I tried flashing one of SuperCurio's voodoo kernels on top, but that seemed to have no effect.
I've tried using Eugene's Froyo that doesnt brick and then downgrading to stock JFD, but it still refuses to boot, same as if I negated the Froyo step. I'm fairly lost as to what my next step should be besides randomly changing settings, but I dont want to get to a state where I can't enter download mode.
ANY help anyone can provide would be amazing and greatly appreciated, and I can of course provide any additional information that would be helpful.
Odin needs time. Odin is your solution.
Sent from my SGH-T959 using XDA App
Thanks for the response, but could you be more specific? I'm aware that ODIN is the solution, because I'm unable to flash anything in recovery.
torturedsoul802 said:
Thanks for the response, but could you be more specific? I'm aware that ODIN is the solution, because I'm unable to flash anything in recovery.
Click to expand...
Click to collapse
Sure. If it was me id download an older odin version. Just try it. Id also go back to stock.
Remember to back up a program to root.
I still use odin 1.3 myself. Works every single time.
Let me know.
Sent from my SGH-T959 using XDA App
Using Odin 1.7 now, I'll try 1.3 and report back on that. The problem is, every time I attempt to revert back to stock (JFD or JI6), the phone refuses to boot, shows Vibrant splashscreen for ~1.5 sec and then shuts off. No boot animations.
torturedsoul802 said:
Using Odin 1.7 now, I'll try 1.3 and report back on that. The problem is, every time I attempt to revert back to stock (JFD or JI6), the phone refuses to boot, shows Vibrant splashscreen for ~1.5 sec and then shuts off. No boot animations.
Click to expand...
Click to collapse
Keep trying. It will work eventually for no reason.
Sent from my SGH-T959 using XDA App
Leave it alone for at least 5 to 10 min on splash screen. Sometimes that takes a while.
Sent from my SGH-T959 using XDA App
mr.orange303 said:
Leave it alone for at least 5 to 10 min on splash screen. Sometimes that takes a while.
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
15 max
Sent from my SGH-T959 using XDA App
Would you recommend flashing Eugene's Froyo that does not brick first and then flashing stock on top? Or straight to flash? And should "re-partition" be checked at any point, since the ext4 system needs to be rebuilt to RFS.
torturedsoul802 said:
Would you recommend flashing Eugene's Froyo that does not brick first and then flashing stock on top? Or straight to flash? And should "re-partition" be checked at any point, since the ext4 system needs to be rebuilt to RFS.
Click to expand...
Click to collapse
No to repartition on my end. But u may want to ask about the ext4 going back to rfs. Ive always done it in cwm honestly.
Someone else with more expirience will have to answer that.
But I have never and read it doesnt need to be done.
Sent from my SGH-T959 using XDA App
Tried, still wont turn on on stock, just vibrant screen.
torturedsoul802 said:
Tried, still wont turn on on stock, just vibrant screen.
Click to expand...
Click to collapse
Its not bricked. Keep trying.
Sent from my SGH-T959 using XDA App
mr.orange303 said:
Its not bricked. Keep trying.
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
+1. If your phone boots at all it's in my experience 100% recoverable. I own a RIFF box as well so if you brick it dead then I can still fix it... . I'll be getting a video up on ODIN usage for Vibrant/i9000 owners tomorrow. Check out my Boot Logo video on my website for a little bit of ODIN usage to give you an idea. You just need to open ODIN. The put the phone in download mode and plug in via USB. Then select your PIT and PDA file and click start. Then you can reflash stock firmware. PM me as I offer this as a service as well.
Thanks for the reply. Usage of ODIN is not my problem, the problem is that flashing to JFD (whether I use Eugene's Froyo 1st or not) results in a failed boot. The phone shows the 1st Vibrant splash screen for ~2 sec and then shuts off. No process I have tried results in a successful stock boot.
Thinking about trying both of these:
http://forum.xda-developers.com/showthread.php?t=823300
http://forum.xda-developers.com/showthread.php?t=940671
HOPEFULLY, one of these will let me get into CWM or access the filesystem in order to disable Voodoo.
Once again, if anyone knows of a way to revert EXT4 -> RFS through ADB or download mode, please let me know!
Well I have been working on it for a day straight and no luck. I have talked to several people and the phone has readonly partition now so it is ****ed! Nand death! I called T-Mobile yesterday and told them I have know idea why but my phone won't turn on, blah, blah, blah. So they are going to replace it under warranty and it will be here in a few days.
torturedsoul802 said:
Thinking about trying both of these:
http://forum.xda-developers.com/showthread.php?t=823300
http://forum.xda-developers.com/showthread.php?t=940671
HOPEFULLY, one of these will let me get into CWM or access the filesystem in order to disable Voodoo.
Once again, if anyone knows of a way to revert EXT4 -> RFS through ADB or download mode, please let me know!
Click to expand...
Click to collapse
Hey, thank you so much for posting this up. These are great finds. I'd be more inclined though, to just call Tmobile and get another phone. I'm really tired of messing with the phone. I don't have time to be messing with this anymore.
The fact that I can get into download mode may be good news, but it does nothing for me right now. With what we know about bricking and unbricking phones, I've thrown every trick I know at it already. I hope you get it fixed, but I"m not messing with it anymore.
drewdude007 said:
Well I have been working on it for a day straight and no luck. I have talked to several people and the phone has readonly partition now so it is ****ed! Nand death! I called T-Mobile yesterday and told them I have know idea why but my phone won't turn on, blah, blah, blah. So they are going to replace it under warranty and it will be here in a few days.
Click to expand...
Click to collapse
Yeah man, me too. I'm getting this thing exchanged. It's a paperweight right now. My phone is doing exactly the same thing.
Can you recap one more time? You are only having problems flashing a custom ROM? You said ODIN is not the problem so I'm taking it you could flash back to stock if you wanted to?
Size matters.
Hey, I haven't posted in here before, I've been a member for a while, just never had anything to contribute. So I got the whole soft brick problem. I spent countless hours trying to get into download mode. The size of the usb cable matters, I was using an LG Optimus cord, and my buddy tried his blackberry cord which had much more gerth, and BAM download mode everytime no problem. Maybe this might help some of you out there.
Also I would like to say, thank you for everyones hard work. I had to roll back to stock roms, and just got the Froyo.UVKA7 to work. I love it, it's quick, it's got color in the settings menu. I wanted to cry... Everyone that has ever had anything to do with the developement to make Android better. THANK YOU!
Absolutely,
I am having problems with the phone starting up and loading what I flashed.
I flashed JI5 Ji6, and Eugene's non bricking Froyo Rom
These 3 are the only ones I was able to find that is ODIN flashable
Why you ask?
I cannot get into Recovery, but I can get into Download mode. I can't get into any recovery at all. NOTHING. This is why ODIN seems to be my only option.
But regardless of any ROM i flash, my phone shuts off right after the Vibrant screen. No splash screen, no loading, no booting. .Nothing. It just shuts off.
I can't charge it either.
i get a Charging bootloop. HOurglass - battery shows up for a bit, then restarts over and over.
So in other words. it's ****ed.
Hope that explains it sufficiently. if you have any more questions or suggestions, Im open man, Im open.
Help me
connexion2005 said:
Can you recap one more time? You are only having problems flashing a custom ROM? You said ODIN is not the problem so I'm taking it you could flash back to stock if you wanted to?
Click to expand...
Click to collapse
Does samsung kies still have a chance of bricking your vibrant? I just used odin to flash back to stock and now I want to go to 2.1> 2.2>2.3>4.0.
I wouldn't risk it........
http://forum.xda-developers.com/showthread.php?t=1464423
I got into cm7, and then i wiped data, cache, and tried to flash ics passion. After that, i kept getting boot looped and didnt have recovery so i had to use odin. Now im back at 2.1...what did i do wrong?
Get back to that point and when it bootloops, pull the battery, boot into recovery again and reflash ICS over itself.
From my guide
Once you are in recovery, scroll down to your folder and find the ICSv? (or whatever version you are wanting to flash) and flash it. First boot takes a long time just like before on CM7. Might also get into a bootloop like in CM7 too. If so, then do the same as before and reflash ICSv?, but this time you'll have to use the Volume-Down + Power (or if on Froyo Bootloaders the above key combo) to get into recovery. Boot up and you are good to go in you new ICS rom.
Click to expand...
Click to collapse
When you say that you didn't have recovery. Was that a custom recovery or you just saw the stock again? There should be no reason why you would not have recovery of some sort.
Agreed, pop your battery and return to cwm and flash, the kernel has updated, it should go now, listen to uncle wood.
and never use kies for anything!!!!!
Never kies
Go straight to 4.0. No need for in order. 2.1 is easiest to flash from anyways.
I've probably flashed hundreds of times now, test roms/kernel Worst case have to heimdall.
One time (n00b days) used Kies mini and it hard bricked me. Had to get jtagged riffbox.....
Sent from my SGH-T959 using Tapatalk 2
u will hard brick ur phone if u use kies ....from 2.1 go directly to cm7 from there use whichever u want .....
Yep .KIES can HB your mobile. I also updated via KIES from 2.1 --> 2.2 (OMG I didnt knew then.. Thanx goes to Woodrube for pointing that out.)
If you need to go to 2.2 there are always better way to than using KIES. this is a great thread which Now im using http://forum.xda-developers.com/showthread.php?t=1674519
tc
edit: No need to update to 2.2 brfore going to ICS. Its always better to flash back to stock before flashing ICS.
Never use kies, period. There are plenty of other options out there. Just in case you guys don't know about the EU bug, you should definitely read this if your planning to run ICS.http://forum.xda-developers.com/showthread.php?t=1580902. I'm currently running a 2.2 ROM until this bug is figured out.
Sent from my SGH-T959 using xda premium
Hello,
My phone was previously running an unofficial version of MIUI and AOSP voodoo kernal. My phone became very buggy and what I was running on was old so I wanted to update to newer things out there today. So I knew I had to disable the voodoo kernel before installing the new ROM but getting into CWM via "Volume up and down and power" didn't seem to be working so I got into CWM using MIUI's reboot option. Unfortunately, this took me to a normal blue CWM so I though huh i guess I don't have voodoo installed then. So I wiped data and cache and attempted to flash the new ROM. about 10% in it rebooted my phone and now it gets stuck at the SAMSUNG logo. I actually can now get into the red voodoo CWM for some reason, but I can't disable it because my phone won't boot. Even though I can set it to disable since it won't boot im guessing it wont actually disable.
How can I get my phone back to stock so I can start over?
Thanks.
You need to see droidstyle's guide on flashing rooms and going back to stock. You should not have three fingered into recovery. There us a section there for your particular situation.
Sent from my SCH-I500 using Tapatalk 2
You should have put it into download mode and re-flashed your radio choice with atlas pit 2.2
Sent from my SCH-I500 using xda premium
Sorry, I resolved this by flashing a DI01 Image over Odin.