Hi guys..
im trying to type in command prompt in my pc but this is what it says..
'fastboot.exe' is not recognized as an internal or external command, operable program or batch file
im trying to type this..
Type in the following command: fastboot.exe -i 0x413c flash recovery recovery.img
what should i do? im a noob when it comes to tech.. thanks in advance!
First, put your fastboot.exe file just in the root of your harddrive, for example "C"
Also put your recovery.img in the same place as the fastboot.exe
then open your comander and type: cd c:
then type: fastboot -i 0x413c flash recovery recovery.img
then type: fastboot -i 0x413c reboot
give it a try!
good luck
http://www.youtube.com/watch?v=a5DEsHHNEp0
make sure your fastboot is named FASTBOOT.EXE and not FASTBOOT32.exe, If it is, just either rename it, or modify your command line.
Please use the Q&A Forum for questions Thanks
Moving to Q&A
breckbit said:
First, put your fastboot.exe file just in the root of your harddrive, for example "C"
Also put your recovery.img in the same place as the fastboot.exe
then open your comander and type: cd c:
then type: fastboot -i 0x413c flash recovery recovery.img
then type: fastboot -i 0x413c reboot
give it a try!
good luck
Click to expand...
Click to collapse
thanks for reply breckbit.. i did what you told me.. but the command prompt says " the system cannot find the patch specified."
what should i do next :/?
tenorntex said:
make sure your fastboot is named FASTBOOT.EXE and not FASTBOOT32.exe, If it is, just either rename it, or modify your command line.
Click to expand...
Click to collapse
thanks for reply tenorntex..
it is fastboot.exe.. i tried what breck told me but the command prompt says
"the system cannot find the patch specified"
Hi guys! i already knew how to do the commands.. thanks for your help.. i type fastboot.exe -i 0x413c flash recovery recovery.img and in my dell screen it says "download recovery done!".. after that i typed fastboot.exe reboot then the phone reboots.. and i click the + - volume.. then i clicked the update.pkg.. after that its black out :/.. i tried to get the battery out then put it in and power on.. and the phone respone is Dell logo only ://.. i really dont know what to do next :/
Related
I've downloaded all the things that im supposed to download. There's recovery image (for froyo 322) and update for froyo 322 and the fastboot file.
Firstly, i made my dell streak onto Fastboot mode.
Then i connected it and it said "Fastboot_Mode"
After that i open Command Prompt and open fastboot.exe which was located in fastboot file
But, when i type "fastboot -i 0x413c flash recovery (my recovery image file name)" it says "fastboot is not recognized as an internal or external command, operable programme or batch file"
Im on windows 7 home basic. Someone please help me. My phone's still in fastboot mode till now
You need to make sure you change the directory of the command prompt to the folder your fastboot.exe is in. Then use fastboot.exe instead of just fastboot in the command
After sucessful HTC Dev bootloader unlock, now unable to access bootloader thru typical vol down/pwr method. Problem suggestions?
pull the battery once maybe? but you can get into it by typing "adb reboot-bootloader"
Battery pull did not work. Where do I type this script?
craZhorse said:
Battery pull did not work. Where do I type this script?
Click to expand...
Click to collapse
Using ADB...
con247 said:
...you can get into it by typing "adb reboot-bootloader"
Click to expand...
Click to collapse
download the SDK, steal the ADB.exe from it and put it in a new folder (C:\Android is always a safe bet,) go to command prompt and CD to the folder with ADB in it, and then type "adb reboot-bootloader"
it will look like
C:\Users\Name>CD c:\Android
c:\Android>adb reboot-bootloader
*Edit* or just use the adb i attached to my post
Hey guys sooooooo,
This is what happened will try to be as detailed as possible.
Prime started acting up so decided to flash new rom.
Switched from CWM to TWRP some time ago placed new
rom on ext sd booted in TWRP and like second nature wiped
device like I do on my phone.
Here is the problem I then realized i had TWRP 2.1 which does
not read ext sd cards
Now I am stuck not being able to do anything so being the good
XDA'er i spend hours searching and attempted to flash CWM now
I have NOOOOOOO recovery my Prime hangs at boot screen I believe
I can access Fast boot but not familiar with ADB so before I move forward
And F*%^ things up more HELP
pdotc said:
Hey guys sooooooo,
This is what happened will try to be as detailed as possible.
Prime started acting up so decided to flash new rom.
Switched from CWM to TWRP some time ago placed new
rom on ext sd booted in TWRP and like second nature wiped
device like I do on my phone.
Here is the problem I then realized i had TWRP 2.1 which does
not read ext sd cards
Now I am stuck not being able to do anything so being the good
XDA'er i spend hours searching and attempted to flash CWM now
I have NOOOOOOO recovery my Prime hangs at boot screen I believe
I can access Fast boot but not familiar with ADB so before I move forward
And F*%^ things up more HELP
Click to expand...
Click to collapse
If you have your twrp 2.1 on pc, do fastboot install (see the twrp page for details) then adb push a rom to the prime and install it... you should be okay then....
Gage_Hero said:
If you have your twrp 2.1 on pc, do fastboot install (see the twrp page for details) then adb push a rom to the prime and install it... you should be okay then....
Click to expand...
Click to collapse
my device is not showing up in ADB i tried naked drivers anything else I can do?
pdotc said:
my device is not showing up in ADB i tried naked drivers anything else I can do?
Click to expand...
Click to collapse
When you plug the device into the pc, is it recovery or fastboot mode? Not sure it will show up if it is in a bootloop. Also if you are in recovery, you should be running adb from within the folder the exe file is in... basically open the folder, press and hold shift then rightclick and select open command prompt here then type adb devices and see what you get.
Gage_Hero said:
When you plug the device into the pc, is it recovery or fastboot mode? Not sure it will show up if it is in a bootloop. Also if you are in recovery, you should be running adb from within the folder the exe file is in... basically open the folder, press and hold shift then rightclick and select open command prompt here then type adb devices and see what you get.
Click to expand...
Click to collapse
I cannot access recovery, I can access the fastboot menu i hear the windows sound. When I check my devices in Win7 it shows fastboot there but when I ADB it says no device.
pdotc said:
I cannot access recovery, I can access the fastboot menu i hear the windows sound. When I check my devices in Win7 it shows fastboot there but when I ADB it says no device.
Click to expand...
Click to collapse
The adb commands won't work in fastboot... you need to use the fastboot commands.
From: http://www.teamw.in/project/twrp2/93
Put the attached file in your nvflashpack folder where you see the fastboot.exe, this way you don't need to type paths. In the same window press and hold shift, rightclick in the window and select open command prompt here. Make sure the prime is already in fastboot mode.... now, copy the command below and rightclick in the command window and select paste (avoids typing mistakes) press enter and with any luck you should be able to boot to twrp recovery...
You will need adb and fastboot for this method. Download the above file, check the md5, rename to twrp.img and put the file in the same directory as your fastboot binary (unless you have /platform-tools in PATH then you can flash from anywhere). Turn off your device and boot to fastboot (power on while holding volume down, then select the usb icon and hit volume up to confirm). The device will now be in fastboot mode. Plug the device into your computer. Run the following command via the command line:
fastboot -i 0x0b05 flash recovery twrp.img
If you use the attached file you don't need the modified bootloader, you will have an older version of twrp but the whole point is to get you running first...
After you do this, boot into recovery, connect the prime to the PC and with the rom in the same folder as adb.exe, open a command window like before. Type adb devices, you should see the prime... then do adb push /the name of your rom.zip/ sdcard/
For the name of the rom, I usually right click the file, go to properties and copy the name.. (no spelling mistakes) again, right click in command window and paste and be sure to put .zip at the end. This should take about 5 minutes to complete. Then in recovery, go to install and you should be able to flash the rom....
Gage_Hero said:
The adb commands won't work in fastboot... you need to use the fastboot commands.
From: http://www.teamw.in/project/twrp2/93
Put the attached file in your nvflashpack folder where you see the fastboot.exe, this way you don't need to type paths. In the same window press and hold shift, rightclick in the window and select open command prompt here. Make sure the prime is already in fastboot mode.... now, copy the command below and rightclick in the command window and select paste (avoids typing mistakes) press enter and with any luck you should be able to boot to twrp recovery...
You will need adb and fastboot for this method. Download the above file, check the md5, rename to twrp.img and put the file in the same directory as your fastboot binary (unless you have /platform-tools in PATH then you can flash from anywhere). Turn off your device and boot to fastboot (power on while holding volume down, then select the usb icon and hit volume up to confirm). The device will now be in fastboot mode. Plug the device into your computer. Run the following command via the command line:
fastboot -i 0x0b05 flash recovery twrp.img
If you use the attached file you don't need the modified bootloader, you will have an older version of twrp but the whole point is to get you running first...
After you do this, boot into recovery, connect the prime to the PC and with the rom in the same folder as adb.exe, open a command window like before. Type adb devices, you should see the prime... then do adb push /the name of your rom.zip/ sdcard/
For the name of the rom, I usually right click the file, go to properties and copy the name.. (no spelling mistakes) again, right click in command window and paste and be sure to put .zip at the end. This should take about 5 minutes to complete. Then in recovery, go to install and you should be able to flash the rom....
Click to expand...
Click to collapse
Ok 1st I want to thank you for your help.
sorry to be a noob at this ADB thing can you tell me a step by step on how get to that fastboot cus i get no where when I type it in?
pdotc said:
Ok 1st I want to thank you for your help.
sorry to be a noob at this ADB thing can you tell me a step by step on how get to that fastboot cus i get no where when I type it in?
Click to expand...
Click to collapse
C:\android-sdk\platform-tools> fastboot -i 0x0b05 flash recovery twrp.img
error: cannot load 'twrp.img'
C:\android-sdk\platform-tools>
C:\android-sdk\platform-tools> fastboot devices
00000 fastboot
C:\android-sdk\platform-tools>
pdotc said:
C:\android-sdk\platform-tools> fastboot devices
00000 fastboot
C:\android-sdk\platform-tools>
Click to expand...
Click to collapse
You will need adb and fastboot for this method. Download the above file, check the md5, rename to twrp.img and put the file in the same directory as your fastboot binary (unless you have /platform-tools in PATH then you can flash from anywhere). Turn off your device and boot to fastboot (power on while holding volume down, then select the usb icon and hit volume up to confirm). The device will now be in fastboot mode. Plug the device into your computer. Run the following command via the command line:
fastboot -i 0x0b05 flash recovery twrp.img
You need to rename the file see the red text above. I would download nvflash from here.... http://androidroot.mobi/t3_nvflash/ the windows zip file.... unzip it and from within the window get your command prompt.... make sure you have the twrp file I attached earlier in the same folder... then copy fastboot -i 0x0b05 flash recovery twrp.img and rightclick and paste into the command filed press enter..... it should install twrp....
now if I have misunderstood and you don't know how to get the prime into fastboot hold volume down and power, when you see the white text in the top left corner, press volume up then volume up to select fastboot of course the prime will be connected to the pc before this...
btw we were all noobs at one point... this is our school....
Gage_Hero said:
You will need adb and fastboot for this method. Download the above file, check the md5, rename to twrp.img and put the file in the same directory as your fastboot binary (unless you have /platform-tools in PATH then you can flash from anywhere). Turn off your device and boot to fastboot (power on while holding volume down, then select the usb icon and hit volume up to confirm). The device will now be in fastboot mode. Plug the device into your computer. Run the following command via the command line:
fastboot -i 0x0b05 flash recovery twrp.img
You need to rename the file see the red text above. I would download nvflash from here.... http://androidroot.mobi/t3_nvflash/ the windows zip file.... unzip it and from within the window get your command prompt.... make sure you have the twrp file I attached earlier in the same folder... then copy fastboot -i 0x0b05 flash recovery twrp.img and rightclick and paste into the command filed press enter..... it should install twrp....
now if I have misunderstood and you don't know how to get the prime into fastboot hold volume down and power, when you see the white text in the top left corner, press volume up then volume up to select fastboot of course the prime will be connected to the pc before this...
btw we were all noobs at one point... this is our school....
Click to expand...
Click to collapse
sent to Asus they want $220 to fix smh now trying to decide on paying or calling it a loss and buying the infinty.
If you can get to fastboot, then it's not a loss and it's recoverable.
Did you already send to Asus?
Sent from my vivow using Tapatalk 2
Sorry if this has been covered before but I can´t get it to work. I desperatly need help because my One X+ does not boot into recovery. It started with me having CM 10.1 working and all was good. Then when I was using the cam it froze and rebooted but didnt start. I tried to get into recovery but after having chosen the recovery option the phone shows the HTC boot screen, blinks to Another HTC bootscreen and then goes black. I assume it shuts off because I cannot Contact it from fastboot or adb. I have tried flashing a number of different recovery and kernel combinations but the same problem remains. I have even tried the RUU to get it back to stock but even that gives me the same problem afterwards.
I have tried to erase cache and Everything I have found in this wonderful forum but now I dont know what to do. Pls help me
My Hboot is 1.35.0000 and it´s the international version.
Hi darkwing66,
You said...
darkwing66 said:
...I assume it shuts off because I cannot Contact it from fastboot or adb...
Click to expand...
Click to collapse
How did you managed to flash a different boot or another recovery if this device is not recognized by the SDK tool?
Lucky Thirteen said:
Hi darkwing66,
You said...
How did you managed to flash a different boot or another recovery if this device is not recognized by the SDK tool?
Click to expand...
Click to collapse
Sorry, it was after the boot that I cannot access it. If I boot into fastboot its possible to flash recovery and kernel. I´m new at this so I try my best
I have tried flashing openrecovery-twrp-2.4.4.0-enrc2b.img, ViperX+ 1.06 with venomkernelflasher etc. Everythings seems to go well until reboot, or trying to get into recovery. Could it be HW fault or is it just my incompetence to get it right?
And you said you tried to flash the appropriate boot.img for your ROM?
Bootlooping is usually caused by an inpropriate boot.img... Can you described how you do it please? There is something missing.
Are you using any sort of tool or you're doing all this via a command window?
Also are you sure you picked the right Recovery? Don't take the CWM, you must install the TWRP for the ENRC2B version since you have an International phone.
---------- Post added at 01:43 PM ---------- Previous post was at 01:19 PM ----------
Oops! Sorry I didn't saw you had edited your previous post.
It's hard to tell what you have done, you need to precise what you are doing....
At first you were at this :
...CM 10.1 working and all was good. Then when I was using the cam it froze and rebooted but didnt start...
Click to expand...
Click to collapse
then now you are at :
...ViperX+ 1.06 with venomkernelflasher...
Click to expand...
Click to collapse
First, if you have CM 10.1 installed on your phone you CAN NOT use VenomKernelFlasher, the latter is only usable with the Viper ROM. You need to flash the boot.img of CM 10.1 if this is the ROM actually installed on your phone.
You should try to flash the correspondent CM 10.1 boot.img located HERE
As I said i´m new at this
When it all happened I was using the CM 10.1. I flashed and rooted with Hasoon2000 v2.3 toolkit.
From the toolkit I flashed the CWM recovery which was working fine until this very moment..
I used the same toolkit to flash the blade boot img you so kindly linked to but same problem did occur after that.
Panicing as I was then I tried Another rom with it´s recovery and kernel but the problems remained the same. (viperX)
Is there anyway I can start over and get a fresh start so to speak? I thought the RUU would solve it but it didn´t. I relocked the phone Before trying the ruu...
update:
Just tried flashing the openrecovery-twrp-2.4.4.0-enrc2b.img with the "BLADE" boot.img but nothing Changes.
It says ok when flashing..
I know this may sound stupid but make sure when flashing a new boot.img you also have flashed the matching rom. I'd take a deep breath and reflash a whole new set. Use normal commands from a "CMD" box so you can track any problems.
Start here with recovery, http://forum.xda-developers.com/showthread.php?t=1995002
Then flash this rom and kernel http://forum.xda-developers.com/showthread.php?t=2010104
edit - just realized if you are not able to boot into android you will need to sideload your rom via recovery
edit - just realized if you are not able to boot into android you will need to sideload your rom via recovery[/QUOTE]
The problem is that I can´t boot into recovery.. can I do it some other way?
i trust you can get to the bootloader screen? if so, is it from there where you try and flash the recovery? Hmm without recovery you cannot flash any rom.
however if you have not been able to boot into recovery i trust you didnt wipe the system (other than when you relocked and then unlocked the bootloader) if so try just flashing the cm10.1 kernel again to see if you can return to a booting phone again.
edit - what error did you get when trying to flash the ruu?
ratcom said:
i trust you can get to the bootloader screen? if so, is it from there where you try and flash the recovery? Hmm without recovery you cannot flash any rom.
however if you have not been able to boot into recovery i trust you didnt wipe the system (other than when you relocked and then unlocked the bootloader) if so try just flashing the cm10.1 kernel again to see if you can return to a booting phone again.
edit - what error did you get when trying to flash the ruu?
Click to expand...
Click to collapse
I didn´t get any errors at all, it just installs then when it boots it shuts off after the HTC bootscreen. It feels like my main concern must be to get a working recovery again? But how??
darkwing66 said:
I didn´t get any errors at all, it just installs then when it boots it shuts off after the HTC bootscreen. It feels like my main concern must be to get a working recovery again? But how??
Click to expand...
Click to collapse
ok so if you boot into bootloader using the vol down and power I trust you are able to select recovery? if so does it then reboot show 2 htc screens then black screen?
ratcom said:
ok so if you boot into bootloader using the vol down and power I trust you are able to select recovery? if so does it then reboot show 2 htc screens then black screen?
Click to expand...
Click to collapse
Yes I can select recovery and then it shows the "HTC quietly brilliant" two times then goes black, or if it shuts off.
darkwing66 said:
Yes I can select recovery and then it shows the "HTC quietly brilliant" two times then goes black, or if it shuts off.
Click to expand...
Click to collapse
if you are using the correct recovery version (International) then I'm out of ideas Sorry I couldnt help
Make sure you downloaded the good RUU for your CID
Boot your phone in BOOTLOADER (Volume down + Power)
Make sure your phone is responding to adb command line with the following : fastboot devices (Enter)
Relock your BOOTLOADER : fastboot oem lock (Enter)
Rebooting
Boot the phone into FASTBOOT and then connect to the PC
Again make sure your phone is responding to adb command line with the following : fastboot devices (Enter)
If you have a your serial number in return you can run the RUU
Good luck!
Lucky Thirteen said:
Make sure you downloaded the good RUU for your CID
Boot your phone in BOOTLOADER (Volume down + Power)
Make sure your phone is responding to adb command line with the following : fastboot devices (Enter)
Relock your BOOTLOADER : fastboot oem lock (Enter)
Rebooting
Boot the phone into FASTBOOT and then connect to the PC
Again make sure your phone is responding to adb command line with the following : fastboot devices (Enter)
If you have a your serial number in return you can run the RUU
Good luck!
Click to expand...
Click to collapse
Thank you for not giving up on me
Did all the steps you said and everything went well except for the problem still remaining. Would it make any difference if I try to extract the recovery and boot from the RUU as I have seen mentioned somwhere in the forum?
You can give it a shot, but how are you gonna transfer the Rom.zip on your phone then?
Usually it's something like
Run the installer of the RUU with your phone unplugged.
Stop on the automated installer and put it aside on your Desktop
Follow this path in your computer : C:\Users\your_account_name\AppData\Local\Temp\{ABC1234D-56E7-8910-F11G-123AB4C56DE7}\{ABC1234D-56E7-8910-F11G-123AB4C56DE7}\Rom.zip (Your string will be different but the Rom.zip will still be there)
Extract from this Rom.zip : boot_signed.img & recovery_signed.img
Boot to fastboot, flash boot_signed.img and recovery.img .
Boot to recovery and flash the Rom.zip
Lucky Thirteen said:
You can give it a shot, but how are you gonna transfer the Rom.zip on your phone then?
Usually it's something like
Run the installer of the RUU with your phone unplugged.
Stop on the automated installer and put it aside on your Desktop
Follow this path in your computer : C:\Users\your_account_name\AppData\Local\Temp\{ABC1234D-56E7-8910-F11G-123AB4C56DE7}\{ABC1234D-56E7-8910-F11G-123AB4C56DE7}\Rom.zip (Your string will be different but the Rom.zip will still be there)
Extract from this Rom.zip : boot_signed.img & recovery_signed.img
Boot to fastboot, flash boot_signed.img and recovery.img .
Boot to recovery and flash the Rom.zip
Click to expand...
Click to collapse
I figured if I manage to extract those files from the rom.zip then I could flash them with fastboot? But at the moment I´m even struggling with extracting the darn files...
Do you Think it will make any difference doing the flashing this way or just running the RUU.exe (wich in my case doesn´t work)?
darkwing66 said:
I figured if I manage to extract those files from the rom.zip then I could flash them with fastboot? But at the moment I´m even struggling with extracting the darn files...
Do you Think it will make any difference doing the flashing this way or just running the RUU.exe (wich in my case doesn´t work)?
Click to expand...
Click to collapse
Hold on I will upload the International version of both of them for you...
Give me ~5 minutes
Edit (sorry if it took longer) :
Here it is :
ENRC2B_recovery_signed
ENRC2Bbootsigned
Hoping you will be able to do something with those. I'll catch later.
Lucky Thirteen said:
Hold on I will upload the International version of both of them for you...
Give me ~5 minutes
Click to expand...
Click to collapse
The recovery file can´t be dl, it says "This file, folder or group is private or does not exist."
edit:
Found one but still the same black screen and no recovery...
darkwing66 said:
The recovery file can´t be dl, it says "This file, folder or group is private or does not exist."
Click to expand...
Click to collapse
Links fixed, Sorry!
First I just want the conformation that you are doing all this manually via a command window and not throught any sort of flashing tool, right?
Lets try those...
Test 1 :
Put this FILE in your platform-tool folder of SDK and do not rename it.
Plug your phone on your computer USB cable
Open a SDK/ADB command window
Type at the prompt> adb devices (Enter) (Serial conformation)
Type at the prompt> adb reboot-bootloader (Enter)
Rebooting in BOOTLOADER
Unplug your phone while rebooting
Once in FASTBOOT plug in your phone and make sure FASTBOOT USB is highlighted
Type at the prompt>fastboot devices (Enter) (Serial conformation)
Type at the prompt>fastboot erase recovery (Enter)
Type at the prompt>fastboot flash recovery TWRPrecovENRC2B.img (Enter)
Type at the prompt>fastboot erase cache (Enter)
Unplug your USB cable and hit Power once.
Select via your Volume rocker -> Recovery
Again hit Power button again
Results?
Test 2 :
Put this FILE in your platform-tool folder of SDK and do not rename it.
Plug your phone on your computer USB cable
Open a SDK/ADB command window
Type at the prompt> adb devices (Enter) (Serial conformation)
Type at the prompt> adb reboot-bootloader (Enter)
Rebooting in BOOTLOADER
Unplug your phone while rebooting
Once in FASTBOOT plug in your phone and make sure FASTBOOT USB is highlighted
Type at the prompt>fastboot devices (Enter) (Serial conformation)
Type at the prompt>fastboot erase recovery (Enter)
Type at the prompt>fastboot flash recovery ENRC2BstockRecovery.img (Enter)
Type at the prompt>fastboot erase cache (Enter)
Unplug your USB cable and hit Power once.
Select via your Volume rocker -> FACTORY RESET
Hit your Power button once to confirm.
The phone should enter Stock Recovery mode and wipe EVERYTHING including "SD card" but also should fix all corrupted DATA (ROM, Directory, Etc)
Once done reboot your phone by holding volume down +power to enter manually the BOOTLOADER
Plug back your USB cable
Open a SDK/ADB command window
Type at the prompt> fastboot devices (Enter) (Serial conformation)
Make sure FASTBOOT USB is highlighted
Type at the prompt>fastboot flash recovery TWRPrecovENRC2B.img (Enter)
Type at the prompt>fastboot erase cache (Enter)
Unplug your USB cable and hit Power once.
Select via your Volume rocker -> Recovery
Again hit Power button again
Can you access Recovery now?
Lucky Thirteen said:
Links fixed, Sorry!
First I just want the conformation that you are doing all this manually via a command window and not throught any sort of flashing tool, right?
Lets try those...
Test 1 :
Put this FILE in your platform-tool folder of SDK and do not rename it.
Plug your phone on your computer USB cable
Open a SDK/ADB command window
Type at the prompt> adb devices (Enter) (Serial conformation)
Type at the prompt> adb reboot-bootloader (Enter)
Rebooting in BOOTLOADER
Unplug your phone while rebooting
Once in FASTBOOT plug in your phone and make sure FASTBOOT USB is highlighted
Type at the prompt>fastboot devices (Enter) (Serial conformation)
Type at the prompt>fastboot erase recovery (Enter)
Type at the prompt>fastboot flash recovery TWRPrecovENRC2B.img (Enter)
Type at the prompt>fastboot erase cache (Enter)
Unplug your USB cable and hit Power once.
Select via your Volume rocker -> Recovery
Again hit Power button again
Results?
Test 2 :
Put this FILE in your platform-tool folder of SDK and do not rename it.
Plug your phone on your computer USB cable
Open a SDK/ADB command window
Type at the prompt> adb devices (Enter) (Serial conformation)
Type at the prompt> adb reboot-bootloader (Enter)
Rebooting in BOOTLOADER
Unplug your phone while rebooting
Once in FASTBOOT plug in your phone and make sure FASTBOOT USB is highlighted
Type at the prompt>fastboot devices (Enter) (Serial conformation)
Type at the prompt>fastboot erase recovery (Enter)
Type at the prompt>fastboot flash recovery ENRC2BstockRecovery.img (Enter)
Type at the prompt>fastboot erase cache (Enter)
Unplug your USB cable and hit Power once.
Select via your Volume rocker -> FACTORY RESET
Hit your Power button once to confirm.
The phone should enter Stock Recovery mode and wipe EVERYTHING including "SD card" but also should fix all corrupted DATA (ROM, Directory, Etc)
Once done reboot your phone by holding volume down +power to enter manually the BOOTLOADER
Plug back your USB cable
Open a SDK/ADB command window
Type at the prompt> fastboot devices (Enter) (Serial conformation)
Make sure FASTBOOT USB is highlighted
Type at the prompt>fastboot flash recovery TWRPrecovENRC2B.img (Enter)
Type at the prompt>fastboot erase cache (Enter)
Unplug your USB cable and hit Power once.
Select via your Volume rocker -> Recovery
Again hit Power button again
Can you access Recovery now?
Click to expand...
Click to collapse
I have used both toolkit and cmd, another problem is that I cant get "adb devices" to return my device. I have tried in win 8, win 7, and now ubuntu but no serial nr returned. If I try fastboot devices it works fine. Is it important to get the adb to work or could I use fastboot instead? I dont know how I can make it work, maybe its my phone thats the problem? I will try now to flash the file you sent me in your latest post. I very very much appreciate you helping me
edit:
Test 1:
The fastboot erase recovery returns - erasing 'recovery'... FAILED (remote: not allowed)
Fastboot flash.. returns -
C:\sdk\platform-tools>fastboot flash recovery TWRPrecovENRC2B.img
sending 'recovery' (7370 KB)... OKAY
writing 'recovery'... INFOFormat partition SOS done
OKAY
Erase cache - OKAY
After reboot - same problem
Test 2:
The same result as test 1...
Must be something is broken in my ***** phone!?
Hello, everybody! I have a major favor to ask you guys.. I did a very stupid thing obviously and tried to root all by myself my Asus memo pad 10 103k using fastboot and adb just like this :
1.Download the two links in the post (system.img.gz and superuser.apk)
Put system.img.gz and superuser.apk in the same folder as adb.exe.
2. Put the tablet into bootloader mode (Power+Vol Up)
3. Run these commands in command prompt with administrator priviledges:
fastboot erase cache
fastboot erase userdata
fastboot erase system
fastboot flash system system.img.gz
5. Reboot and again run in command prompt
adb install Superuser.apk
The first 3 comands went ok but it couldn't flash the system image. Obviously my tablet is ded now. When I try to open it, the logo appears and then a brocken android flashes at me :crying: I tried to hard reset, reset from sd card and nothing works.. I'm desperate... Please help me!!