Related
Hey guys,
here is what is going on with my German Vodafone I9100
After using Sensation Rom for a few months, I finally decided to make the transition to Android 4.
The first rom I tried, was the Simplistic ICS by LegendK95
Installing from CWM worked like a charm, booting worked like a charm, but whatever I tried to do, the phone freezed in homescreen randomly after 5-30 seconds. Only a restart bring it back to work, only to make it freeze again after the mentionend time span.
Whatever I did (waiting in home screen, pulling down the statusbar, scrolling in app drawer) the phone always freezes.
After dozen of restarts, I installed the rom again, the problem stayed.
Then I decided to go to stock 4.0.3 (LP6). Installation via Odin worked like a charm. Booting worked like a charm, but the homescreen-freeze-problem got even worse.
I also tried to reinstall the stock LP6, but the phone now even froze in CWM mode, while data reset AND WHILE INSTALLING THE FW.
Now I got a soft brick in my hands.
So, I installed stock 2.3.3. via Odin. The phone now worked flawless again. No freezes, no no nothing. Just a working phone.
My final try was to install the latest CM9 build.
Guess what happend?
The legendary homescreen freeze. That nobody else appear to have. YAY
So, somehow my phone seems to be allergic to Android 4.
Can somebody please help me?
Regards
PS: Yes, I followed the instructions every firmware provided.
Honestly you want an honest answer. Stay clear of ICS leaks and yes that means even cm9. Reason being. Because of what they are. Leaks and nothing official. Not saying that they are not good but if you look at the original android development can you see any actual ICS roms? No. Why you asking? Because no kernel sources have been released and nothing is far from stable yet. Even cm9 builds codeworkx has on the thread title experimental. So my advice. Flash a Gingerbread custom rom slap on it the ICS by vertumus and your good to go till the official stuff get released.
Maybe before flashing ICS you should fully wipe your device to get rid of all previous ROM data from Gingerbread as they,I imagine,wont be very compatable.
Boot to recovery and go to "mounts and storage" and format System/Data/cache and then factory reset.Then flash the Rom via recovery(install zip).If its an Odin flash then reboot and flash via Odin.
Hi suarez,
thanx for your opinion. I read a lot of threads before updating and came to the conclusion that the current releases, even CM9 seem to be pretty stable.
Also I found no one having issues like that.
Hi cooza,
I did that.
Klammeraffe said:
Hi suarez,
thanx for your opinion. I read a lot of threads before updating and came to the conclusion that the current releases, even CM9 seem to be pretty stable.
Also I found no one having issues like that.
Hi cooza,
I did that.
Click to expand...
Click to collapse
No problem my friend. But I still stand by what I said though. For me to make the jump is a no go yet. Yes they might be stable but so far I still read problems regarding video forever, this is not working that does not work and that most issues will be solved once kernel source is available. Hence why still the experimental on cm9.thread.
Sent from my GT-I9100 using xda premium
Suarez7 said:
No problem my friend. But I still stand by what I said though. For me to make the jump is a no go yet. Yes they might be stable but so far I still read problems regarding video forever, this is not working that does not work and that most issues will be solved once kernel source is available. Hence why still the experimental on cm9.thread.
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
Yes, but if you're not that big into watching/recording videos on your SGS2, it's pretty freaking stable.
Installing the latest experimental build of CM9 is probably the best thing I've done to my SGS2 as of late. It's just so... Nice.
I cannot get rid of that problem.
I really need help on this.
Some new information:
I also tried to flash the leaked stock LP2. Same result.
This FW crashed on first start, when the Samsung Apps are installed.
Still some little success:
When flashing from stock BUGKJ2 straight to LegendK95's Simplistic ICS rom, I was able to get it to run, until I have to restart the phone.
But this was the only rom capable of doing so. Every other fw failed.
So, I now can have ICS on my phone but only until I restart the phone.
After reboot, the phone crashes again after some seconds.
Additionally the CWM Recovery doesnt work as long as I have a ICS rom on it.
It also occasionally crashes. Preferrably when I try to flash a new rom, leaving me a shiny brick
Here are the steps to get Simplistic ICS run until reboot:
1. Put the file on internal memory.
2. Go to recovery: wipe data/factoy reset, wipe cache, wipe dalvik, wipe battery, format system, format data, format cache
3. Flash from internal sd
4. Reboot
Klammeraffe said:
Some new information:
I also tried to flash the leaked stock LP2. Same result.
This FW crashed on first start, when the Samsung Apps are installed.
Still some little success:
When flashing from stock BUGKJ2 straight to LegendK95's Simplistic ICS rom, I was able to get it to run, until I have to restart the phone.
But this was the only rom capable of doing so. Every other fw failed.
So, I now can have ICS on my phone but only until I restart the phone.
After reboot, the phone crashes again after some seconds.
Additionally the CWM Recovery doesnt work as long as I have a ICS rom on it.
It also occasionally crashes. Preferrably when I try to flash a new rom, leaving me a shiny brick
Here are the steps to get Simplistic ICS run until reboot:
1. Put the file on internal memory.
2. Go to recovery: wipe data/factoy reset, wipe cache, wipe dalvik, wipe battery, format system, format data, format cache
3. Flash from internal sd
4. Reboot
Click to expand...
Click to collapse
Maybe the problem is the stock firmware you first flash.I searched for it but cant find it,is it carrier branded?..BUG sounds like it to me.Maybe you should fully wipe your phone (format System/Cache/Data) and first flash something like XWKL1 and then the ICS ROM.If the ICS ROM you are going to flash has a multi CSC package in it then it wont matter what F/W you flash first.
hello cooza,
i had to go back to stock 2.3.3 because my phone was a brick after flashing any ics rom.
i tried to flash simplistic ics and cm9 via cwm, i dont know if those contain multi_csc.
however, the leaked stock roms, lp2 and lp6 both contain multi_csc that i flashed via odin.
here are all the steps i tried:
fail 1: flashing from sensation rom 3 (2.3.6) to simplistic ics
fail 2: flashing from 2.3.3 to cm9/simplistic ics
fail 3: flashing from bricked ics to stock lp6
fail 4: flashing from 2.3.3. to 2.3.5. (latest official release via kies) to cm9/simplistic ics/stock lp6
fail 5: flashing from 2.3.3 to leaked stock lp6 inluding the pit-file provided
nevertheless, flashing from 2.3.5 to simplistic ics worked until restarting the phone. however, cwm was not working correctly then. so, surely i could have tried to let the phone on for forever, but as soon as i would want to flash a new firmware, i would have got a brick left, because cwm would crash during installation of the new one.
there must be some help out there
thanx for trying cooza. much appreciated.
You might have a damaged bootloader.Although its not needed you could try a JTag.A JTag is used to bring a hard bricked phone back to life.You dont have a hard bricked phone but what it also does is repairs any damage that the bootloader may have.Costs about 25 to 30 euros.As a last resort you could give it a go if your phone is going to give you constant reboot problems and not let you flash firmwares.It should also repair any repartition faults because it completely wipes the bootloader before repairing it.The phone will come back like the first day you got it.check the link below out and use it to find one close to you if you choose to do one.I had an i9000 done last September here in Spain and it came back perfect from a hard brick soo I know it works.I used the link below.
http://www.jtagbox.com/riff-jtag-bo...-bricked-phone-riff-box-owners-list/#comments
Seems like the very last option to me
Would a broken bootloader allow me to run 2.3.X flawless?
Question does Samsung stock firmware work .
As it seems all your problems are from using a buggy unreleased test rom not from using Samsung released firmware .
I would if it was my problem .
Clean Slate for those that balls up the firmware .Or need to return to service or decide if its hardware/firmware problem .
Backup data first if phone is working .
Boot CWM recovery
Mounts and Storage
Format cache data system sd card wiping everything on the phone .
Remove battery
Boot to download mode
Open Odin
Install correct Samsung stock firmware for your phone model .
Test phone works .
jje
hi JJ,
thanks for your post.
as i said, the phone is working fine on stock android 2.3.X as well as custom firmwares using 2.3.X.
However, all 4.0.X firmwares I tested, showed the same behaviour: crashing my phone in homescreen (or anywhere else after booting) AND in cwm after 10 to 30 seconds.
only simplistic ics custom rom worked fine until first reboot. then it crashed as well. everytime.
I tested 2 stock firmwares of samsung and 2 custom roms.
I also tested flashing 4.0.3 (CM9) on a friends SGS2 using the same procedure I used on my phone. It worked on first try and he`s now a happy android 4 user.
right now i`m running on CM7 but i wanna uprage to android 4.
edit:
up to this date there is no official released 4.0.3 rom for the sgs2 but how can it be that I have the only phone showing such a behaviour while everyone else has a 99% stable fw for the same phone using the same rom?
Mate,at least it works,thats the important thing.I can understand that its frustrating when the only Firmware/customROM you want doesnt work in your phone and only your phone but we are talking about BETA version ROMs.If there is something for some reason blocking the ICS ROM then it is possible that the JTag will clear it up as it wipes and repears the bootloader as I mentioned so any corrupt data will dissappear.Ive had a bricked phone done and it still works perfectly today but never a phone in your situation.Its possible but never having done so I cant guarantee it.If you want give it a go.You got nothing to loose except 20 or 30 bucks for your efforts.
I have exactly the same issue with a "german" Galaxy S2. I tried to install the {CWM}İCS REMİX ROM v8.4 ULTİMATE ONLİNE XXLP6 4.0.3 resurrection NO-WİPE
Version.
Followed ofcourse the installation instructions letter for letter. It doesn't go over the logo screen. ( And yes I am aware it takes several minutes for such an installation to finish)
I read in that thread of at least another 3-4 people with the same issue.
Going back to any 2.3.x works as usual.
If you take the time and read the various ICS posts one inescapable fact will arise .
ICS suffers from many varied problems with no two users reporting identical problems .
That is compounded by two factors one the boot loader and two as a beta test rom for some strange reason those with very little knowledge rush to install it .
But hey save money on the Samsung testing department just leak your Alphas and Betas .
For me i will play with a test rom for an hour or two but thats it i require a stable rom for daily use . It will need vast improvement for me to consider the final release of ICS for daily use .
jje
spytrek said:
I have exactly the same issue with a "german" Galaxy S2. I tried to install the {CWM}İCS REMİX ROM v8.4 ULTİMATE ONLİNE XXLP6 4.0.3 resurrection NO-WİPE
Version.
Followed ofcourse the installation instructions letter for letter. It doesn't go over the logo screen. ( And yes I am aware it takes several minutes for such an installation to finish)
I read in that thread of at least another 3-4 people with the same issue.
Going back to any 2.3.x works as usual.
Click to expand...
Click to collapse
GSMArena say that Samsung are launching ICS for the S2 in march
http://www.gsmarena.com/samsung_galaxy_s_ii_and_galaxy_note_to_get_ics_in_march-news-3752.php
with this I imagine that stable ICS custom ROMs are just around the corner so if you can wait a few months more you will be able to flash a stable safe ROM without any problems.Until then the BETA versions that are out at the moment are going to cause these types of things.
I had these same isues with KP8 on my s2. I fixed them by flashing LP6 directly over kp8 without wiping anything. I think it may have something to do with the phone drivers you have installed on your pc. They may be damaged and be producing some kind of error on the flashing proccess. I recomend that you hard reset to 2.3.x and reinstall kies on your pc. That should reinstall phone drivers too. And make sure kies is NoT running while using odin. Kies doesent like odin
Sent from my GT-I9100 using Tapatalk
I have patience As long as I fallback to a functional rom everyting is cool. As for the alpha-beta testing, I have nothing against it and I didn't complain about it. Till March I hope the S3 is out so I can pass my S2 to my better half ...
Hi,
I tried 10-15 diffrent custom roms and maybe 5 kernels. On everyone, except Sensation, SGS2 reboots very often. Sometimes is 2 times in hour, on CheckROM reboots after 1-2min after SGS2 is on. I tried diffrent base and still the same issue. For now I back to stock KI4 and for three days it hasn't restart even once. Anyone got idea how to fix it? SGS2 is brand new, I can send it for warranty repair, but what I tell him? It restarts if I install custom rom? I don't think so
Of course I did full wipes before install new one, install two-three times same rom and even don't install any apps. Still rebooting, except stock and sensation I don't use external SD card.
So I must stick with stock rom or sensation? No way, I love to flash new roms
Cheers
You're missing some key info like did you try to wipe the phone/data/cache did you undervolt/underclock... and the list goes on.
Ok, here is the list what have I done, from the begining:
- stock rom was KE7, I instal proper CFroot on it
- next I install Sensation via CWM
It was good, but little slow, quite laggy, slower then my SGS (i9000)
- install CheckROM v4 via CWM
Great speed, but reboots
- install speedmod from kitchen, nothing improves, keeps rebooting
- from now I can't remember, I check various roms and kernels, nothing improves
- back to sensation, great speed (same version than on the begining, but a lot faster), no reboots
- install stock KI3, change PC to XEO, upgrade via KIES to KI4 and everything is ok
- I don't change clock speed or anything else, just change roms and kernels
Please state more of your phone info... current android version etc... country of origin that kind of normal stuff - about phone etc
Edit - before you do the below - make sure you have the right version phone etc...
Maybe post up your phone details to be sure...
As a test please dl the rom in my sig - top one - illusion
Check md5 sum as always you should
Reboot to CWM
Wipe data
Wipe cache
Wipe dalvik
Install zip from memory
Reboot
- set up the basics but not wifi etc ( I say this so that apps don't auto download which slows phone down loads at first ) ... leave 10 - 15 mins just sat on the side not touching a thing...
Reboot again and finish setting up your phone... Tell me if you have lag etc...
If you do then start completely from scratch - flash your original firmware ... return completely stock - and start fresh
SGS2 was brand new, bought about 10 days ago in polish GSM operator PlusGSM. Stock rom was 2.3.4 (?) XXKE7 branded by Plus. Now it is 2.3.5 XXKI4, without root and CWM, just clean stock XXKI4.
I'll try with Illusion and give you a feedback how it goes.
goofy3 said:
SGS2 was brand new, bought about 10 days ago in polish GSM operator PlusGSM. Stock rom was 2.3.4 (?) XXKE7 branded by Plus. Now it is 2.3.5 XXKI4, without root and CWM, just clean stock XXKI4.
I'll try with Illusion and give you a feedback how it goes.
Click to expand...
Click to collapse
Not the most popular but I know its stable ... So model number is - GT - I9100 (no letters on the end?????)
Just GT-I9100, no letter on the end, black version.
Under battery: SSN: -I9100GSMH
After some time with Illusion XT:
- it superb fast
- no lag
- no restart
- one freeze (during installing apps via appbrain) and only removing battery helps
goofy3 said:
After some time:
- it superb fast
- no lag
- no restart
- one freeze (during installing apps via appbrain) and only removing battery helps
Click to expand...
Click to collapse
In your dialer put *#1234# and post exactly what there is
PDA: I9100XWLA4
PHONE: I9100XXLPB
CSC: I9100XXKJ3
Build Info: Tue Jan 17 15:09:29 CET 2012
goofy3 said:
PDA: I9100XWLA4
PHONE: I9100XXLPB
CSC: I9100XXKJ3
Build Info: Tue Jan 17 15:09:29 CET 2012
Click to expand...
Click to collapse
Ok, first dl Checkrom V6 ... its on LA4 base with cf-root wich works very well with me. Push the file to your sd card and flash with cwm.
http://download.checkrom.com/roms/a...vo_HD_V6.zip?iframe=true&width=950&height=420
Do that first ...
EDIT: dont forget clear cache/dalvik
ITRC said:
Ok, first dl Checkrom V6 ... its on LA4 base with cf-root wich works very well with me. Push the file to your sd card and flash with cwm.
http://download.checkrom.com/roms/a...vo_HD_V6.zip?iframe=true&width=950&height=420
Do that first ...
EDIT: dont forget clear cache/dalvik
Click to expand...
Click to collapse
Originally Posted by goofy3
After some time:
- it superb fast
- no lag
- no restart
- one freeze (during installing apps via appbrain) and only removing battery helps
Why???? Sounds like backup coprruption to me - all was fine until then
I tried CheckROM v6 at day when it was released and I get reboots. So far I'm happy with Illusion, so I stick with it for few days and see how it works.
Maybe something went wrong when I install CFroot first time, and after flashing stock again it back to normal. I hope so...
@BigMrB, it wasn't backup, only fresh install from market, but using appbrain fast install. Maybe too many downloads in background casue freeze.
BigMrB said:
Originally Posted by goofy3
After some time:
- it superb fast
- no lag
- no restart
- one freeze (during installing apps via appbrain) and only removing battery helps
Why???? Sounds like backup coprruption to me - all was fine until then
Click to expand...
Click to collapse
Is your device running fine already then??
goofy3 said:
I tried CheckROM v6 at day when it was released and I get reboots. So far I'm happy with Illusion, so I stick with it for few days and see how it works.
Maybe something went wrong when I install CFroot first time, and after flashing stock again it back to normal. I hope so...
Click to expand...
Click to collapse
I've never had a single reboot / fc for 2 months using illusion
I edited previos post, maybe too many download in background cause freeze. And after that, everything runs smooth without any problems
BigMrB said:
I've never had a single reboot / fc for 2 months using illusion
Click to expand...
Click to collapse
Ah ok then... But If you go to another rom, read the instructions very good. Sometimes you have to wipe cache/dalvik etc ...
goofy3 said:
I edited previos post, maybe too many download in background cause freeze. And after that, everything runs smooth without any problems
Click to expand...
Click to collapse
Good Luck ...
Just a quick note. You didn't state if you wiped the phone before flashing a new rom. Do that and then see if there are any problems. Most rom problems IMHO are usually a result of flashing a new rom and not wiping first.
bpivk said:
Just a quick note. You didn't state if you wiped the phone before flashing a new rom. Do that and then see if there are any problems. Most rom problems IMHO are usually a result of flashing a new rom and not wiping first.
Click to expand...
Click to collapse
Yes, I do wipes (data, cache, dalvik) before every flash, sometimes I tried even after, or after first boot, no luck. I've got some experience after few years with flashable devices and year and a half with I9000 Problems comes with I9100...
Ok, after one day with Illusion XT:
- normal use (using for 2-5min continuously, make call, send text, fast check www or email) - everything is ok
- extended use (using for 15-30min continuously, browsing web, tapatalk, wrote emails etc) - one freeze
- heavy use (using 30min and more continuously, web, some YT movies, playing Dead Zone) - freezes, restarts, freeze and restart, generaly everything was falling apart. I have no FC's, but some apps starts and close after few seconds. I must left phone for some time and then everything back to normal. One more thing. Before playing Dead Zone, battery was 60%. I played maybe 5min, then freeze, restart and battery was 25%. What the hell??!!
So, my only thought is overheating CPU/memory. I read that S2 getting hot is normal, but maybe my CPU/memory is less tolerant. It's my only idea, and I say this again, I don't ever change frequency of CPU or memory. Governor is set by default to lag free. Of course I can lower frequency or change governer to slower, but it's pointless.
I'm so much closer to send it to warranty with note that is restarting at heavy use. My only hope is that they don't just upgrade FV like they used to do.
I will do it on next week, so maybe during the weekend someone will post an idea what else could it be. But please, don't tell me to flash other rom or kernel, I check douzens of them, it's something else.
Hello,
I switched from WanamLite for Foxhound and I must say everything is working great. No more freezes, crashes and my geolocation ifnally is accurate again.
I followed all installation instructions, format /system, factory reset wipe cache and dalvik and installed.
The only problem Im having is that some of the systemtray icons arent working. The ones that are working is random. So im able to toggle GPS but not to toggel wifi, an hour later wifi is working but data is disabled. etc.
Anyone has any idea what this could be?
sometimes the package dosnt open fully so if ur facing prblm then its better to hav a fresh installation,,an also many will carry tb backup all the way frm stock to custom roms so even tht gives a prblm to many out here......cheeeeerz
rocky23 said:
sometimes the package dosnt open fully so if ur facing prblm then its better to hav a fresh installation,,an also many will carry tb backup all the way frm stock to custom roms so even tht gives a prblm to many out here......cheeeeerz
Click to expand...
Click to collapse
I never restore anything else but applications when I'm switching roms, not systemdata whatsoever. Would it be possible to flash a different systemui instead of reinstalling the rom? Or could I just reinstall the rom without resetting the system all over again, spent hours to rebuild my settings etc ><
Why don't you redo the procedure once again, wipe cache then dalvik, format system then flash the package via recovery.
Errors could happen, so no harm if you try it again.
If not try the latest wanam 10.6 version it is almost perfect or you can always go back to a stock ROM and use Siyah kernels, I'm on XXLPQ with Siyah b6, very stable tremendous battery life. (you should test different kernels though and stick to the best)
maf23 said:
Why don't you redo the procedure once again, wipe cache then dalvik, format system then flash the package via recovery.
Errors could happen, so no harm if you try it again.
If not try the latest wanam 10.6 version it is almost perfect or you can always go back to a stock ROM and use Siyah kernels, I'm on XXLPQ with Siyah b6, very stable tremendous battery life. (you should test different kernels though and stick to the best)
Click to expand...
Click to collapse
For some reason I always have troubles with my geolocation and gps working very slow or not at all on different kernels then stock. Thats why I switched to foxhound. Ill redo the complete procedure tonight to see if it helps.
Thanks for the info so far.
Hello
I did not want to wait for the ICS upgrade for my region. so I decided to flash another ICS stock rom. I downloaded one it was a tra.md5 file, I just flash it with Odin, after phone rebooted ICS was there but for my surprise all my applications and settings are there as well.
I was thinking that flashing another stock rom will delete all my apps as it usually happens when I was previously testing ICS before official release. Can you please explain this ?
Every ROM is different if there is some function that an other already installed app uses it will forceclose it is *Recommended* to wipe everything so there will not be so many bugs.
Sounds like you flash a "No Wipe" rom, this will upgrade your android while preserving existing data etc.
If the ROM is a no wipe Rom, then your apps and data will remain. There is nothing unusual.
Btw. Wrong thread.
Sent from my GT-I9100 using XDA
harise100 said:
Btw. Wrong thread
Click to expand...
Click to collapse
Reported to moderators. They will move it.
well this is a stock ROM from samfirmware XXLPS. I wanted to have the last one. Right now my phone keeps restarting. but I am not getting any FC.
Actually I have 300 Apps I did not want to reinstall them, does upgrading to ICS works fine without wipe?
the_desperado said:
well this is a stock ROM from samfirmware XXLPS. I wanted to have the last one. Right now my phone keeps restarting. but I am not getting any FC.
Actually I have 300 Apps I did not want to reinstall them, does upgrading to ICS works fine without wipe?
Click to expand...
Click to collapse
No some apps may not be compatible its your choice really stock roms are no wipe .
You can install the stock firmware posted on XDA .
jje
ok guys.now it is more stable. but market (play) is not working, I can open it I cam see my apps (not all of them) but I can not download or update. no errors just it is taking forever
I did a fall back. it keeps closing and restarting.
What is the best way then to upgrade without reinstalling all apps and resetting system settings? I mean something similar to KIES?
Sup,
So, I flashed mutliple custom ROM's when I got this device like any other crack-flasher would but I then realised I much prefer it to be running stock with root access until an AOSP ROM comes along.
So I came from Omega 4.0 to stock LE8 in the UK, ever since I've flashed this stock ROM (Which is odexed) I keep getting the message "Sorry, messaging has unfortunately stopped" every time I open the app. I've tried wiping data/cache/dalvik and flashing in Odin again, same issues. I then went back to another custom ROM (HyperGalaxy) then went back to stock to test, still the same.
I have also tested an inverted AOSP 4.0.4 Mms app which worked on Omega, but didn't work on stock (Got the same message)
Data of the Messaging app has been wiped, i've disabled the app, rebooted, enabled again, still the same issues.
I've searched and I found 2 other threads with the same thing, but noone has been helpful enough yet.
It seems like the phone still thinks its running a Deodexed ROM but I need to get it back to full working order since I need to text something.
Any help is appreciated.
Try a factory reset...
Mopral said:
Try a factory reset...
Click to expand...
Click to collapse
Probably didn't make it clear enough, I did that already. 3 times to be exact.
i have the same issue. Need help.
i get this message with multiple apps.
all of them are standard run of the mill things like browser, messages, video player. My phone is only a week old and completely stock
some real bugs in this phone still that need sorting asap. poor effort by samsung really
Same issue here, has anyone found a fix for it yet?
I only encounter this in hyper x rom. So far so good in omega
Ok,I had this issue when I tried to install different firmware and modems using Mobile Odin. It fully resolved when I flashed back the official UK firmware and modem (le8) using normal desktop Odin. No force closes whatsoever since. Incidently, I'm now using LE9 firmware with UK CSC, rooted, with no issues at all. I used chainfires recovery, then flashed superuser to root.
Hope this helps.
nbhadusia said:
Ok,I had this issue when I tried to install different firmware and modems using Mobile Odin. It fully resolved when I flashed back the official UK firmware and modem (le8) using normal desktop Odin. No force closes whatsoever since. Incidently, I'm now using LE9 firmware with UK CSC, rooted, with no issues at all. I used chainfires recovery, then flashed superuser to root.
Hope this helps.
Click to expand...
Click to collapse
i got this everytime i clear cache and or wipe data from recovery before flashing new fw's.
so never wipe anything before flashing. if u already wiped, then flash it all over again and it will be all ok