I just upgraded to ICS Passion V11 and want to know if it already overclocks me to 1.4? If yes how can we stop the overclocking.
Thanks.
Get voltage control from market it should be free.
Check your OC it shouldn't be OC stock though
Sent from my SGH-T959 using xda premium
xriderx66 said:
Get voltage control from market it should be free.
Check your OC it shouldn't be OC stock though
Click to expand...
Click to collapse
You are right, it wasnt OC , I was confused as it was mentioned by neobuddy in the ROM post
I just discovered for myself the CPU utility shows max CPU frequency as 1188MHZ. Is there something wrong with my CPU or is it ROM Toolbox's fault?
Thanks!
oort cloud said:
I just discovered for myself the CPU utility shows max CPU frequency as 1188MHZ. Is there something wrong with my CPU or is it ROM Toolbox's fault?
Thanks!
Click to expand...
Click to collapse
I use ROM toolbox a well for many thing including cpu speed... For me I'm can go all the way to 1.89 ghz.... Have you governed the cpu elsewhere? Also what ROM u using? I'm on aokp
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
the max that the rom toolbox sliders will go depends on the kernel you are using. Run and oc kernel and you can safely run at 1.86.
oort cloud said:
I just discovered for myself the CPU utility shows max CPU frequency as 1188MHZ. Is there something wrong with my CPU or is it ROM Toolbox's fault?
Thanks!
Click to expand...
Click to collapse
Did u set the cpu in rom toolbox and settings/performance/cpu? If u set both depending on the rom/kernel ya might have some weirdness.
Been using rom toolbox for almost a year, or whenever sasibob did her review on the main portal. The apps solid.
Sent from my SAMSUNG-SGH-I717 using xda premium
Thanks for your responses, guys. I was on Gingerbread stock. Now I'm on ICS stock and it goes all the way to 1500. Pardon my ignorance, what's oc kernel?
Overclockable...
Meaning there would be options higher than 1.5 .. And the frequency options would depend on the modules put in by the dev
I recently flashed to 2.45cz firmware and I obtained root access and cwm. What I wanted to know was that does stock kernel allow over-under clocking with antutu cpu master ?? Or I need a custom kernel for that??
Use the thank button, it's there for a reason
Sent from my LT26i using xda premium
Harsh7689 said:
I recently flashed to 2.45cz firmware and I obtained root access and cwm. What I wanted to know was that does stock kernel allow over-under clocking with antutu cpu master ?? Or I need a custom kernel for that??
Use the thank button, it's there for a reason
Sent from my LT26i using xda premium
Click to expand...
Click to collapse
Custom Kernel that supports OC and undervolt.
rhogz said:
Custom Kernel that supports OC and undervolt.
Click to expand...
Click to collapse
I was able to underclock the stock firmware with antutu master!! I underclocked it at 1gz at max and it's working!! I can already see the slight lag even with free ram when playing temple run which was never before!!
Use the thank button, it's there for a reason
Sent from my LT26i using xda premium
Harsh7689 said:
I was able to underclock the stock firmware with antutu master!! I underclocked it at 1gz at max and it's working!! I can already see the slight lag even with free ram when playing temple run which was never before!!
Use the thank button, it's there for a reason
Sent from my LT26i using xda premium
Click to expand...
Click to collapse
Yes you can underclock but not overclock and/or undervolt stock kernel.
Is it just me or do you think overclocking a 1.5 Ghz device for non-testing purposes is just unnecessary?
Hello all, i have a question, i am using the Phenomenal 3.0 normal version kernel and is using SETCPU apps to manage my CPU speed. However, when i try to set the speed to 1100mhz and above, the CPU speed does not go up to 1100mhz and above, instead it always stay at 1000mhz.
Has anyone experinece this before? if yes, has anyone any steps to resolve this?
Could it be the undervolt issue that is preventing me for going up to 1100mhz?
Thanks.
Looking at the thread it doesn't look like the kernel has overclock capabilities,
slaphead20 said:
Looking at the thread it doesn't look like the kernel has overclock capabilities,
Click to expand...
Click to collapse
I am not trying to overclock, just trying to go to 1400mhz at times but i just cant go past 1000mhz, only when i restart the phone, then it will go to 1400 at times...
seem like i have solve the problem by untick the cpu power saving under the power saving option. However, it seem like the SetCPU apps is useless as i am unable to control the CPU anymore.. is that true? or are there any apps that can overcome this issue?
mrlow81 said:
Hello all, i have a question, i am using the Phenomenal 3.0 normal version kernel and is using SETCPU apps to manage my CPU speed. However, when i try to set the speed to 1100mhz and above, the CPU speed does not go up to 1100mhz and above, instead it always stay at 1000mhz.
Has anyone experinece this before? if yes, has anyone any steps to resolve this?
Could it be the undervolt issue that is preventing me for going up to 1100mhz?
Thanks.
Click to expand...
Click to collapse
Have you tried using other apps, instead of SetCPU, or are you running two CPU-manipulation apps at once?
Try clearing SetCPU's data/cache and try again
I personally use AnTuTu CPU Master, but that is a personal choice, I guess
familyguy59 said:
Have you tried using other apps, instead of SetCPU, or are you running two CPU-manipulation apps at once?
Try clearing SetCPU's data/cache and try again
I personally use AnTuTu CPU Master, but that is a personal choice, I guess
Click to expand...
Click to collapse
I have SETCPU and system tuner pro... does these 2 apps cause the issue that i have?
Phenomenal kernel is a ready to use kernel. You cannot change any settings here in this kernel. It's not like any other kernel wherein gives you the ability to configure the cpu and gpu. Setcpu will only work with other kernels such as SiyahKernel. This will give you the ability to set the cpu and gpu freq and voltage. The power saving mode limits the power of your cpu, thus disabling it will increase cpu freq
Sent from my GT-I9300 using xda app-developers app
BelJanss said:
Phenomenal kernel is a ready to use kernel. You cannot change any settings here in this kernel. It's not like any other kernel wherein gives you the ability to configure the cpu and gpu. Setcpu will only work with other kernels such as SiyahKernel. This will give you the ability to set the cpu and gpu freq and voltage. The power saving mode limits the power of your cpu, thus disabling it will increase cpu freq
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Hi, thanks for the info and advise, so can i ask if i revert back to Stock Kernel, i should be able to control my CPU speed?
mrlow81 said:
Hi, thanks for the info and advise, so can i ask if i revert back to Stock Kernel, i should be able to control my CPU speed?
Click to expand...
Click to collapse
No u need a kernel with cpu freq altering capability integrated. Siyah kernel has this I know
Sent from my GT-I9300 using xda app-developers app
I use Tegrak Overclock on stock rooted ROMs. It goes to 1.6Ghz. Works perfectly.
mrlow81 said:
Hi, thanks for the info and advise, so can i ask if i revert back to Stock Kernel, i should be able to control my CPU speed?
Click to expand...
Click to collapse
Nope. Stock kernel will not allow you to change it. If you're on stock ics rom, i would suggest you use siyah kernel v1.5.2. I'm once a user of it. If you need a guide in underclocking and undervolting, you can find the best guide here posted by bala_gamer. You can also settings in his signature which you can use.
Sent from my GT-I9300 using xda app-developers app
---------- Post added at 06:40 PM ---------- Previous post was at 06:37 PM ----------
Here's the link
http://forum.xda-developers.com/showthread.php?t=1827635
Sent from my GT-I9300 using xda app-developers app
BelJanss said:
Nope. Stock kernel will not allow you to change it. If you're on stock ics rom, i would suggest you use siyah kernel v1.5.2. I'm once a user of it. If you need a guide in underclocking and undervolting, you can find the best guide here posted by bala_gamer. You can also settings in his signature which you can use.
Sent from my GT-I9300 using xda app-developers app
---------- Post added at 06:40 PM ---------- Previous post was at 06:37 PM ----------
Here's the link
http://forum.xda-developers.com/showthread.php?t=1827635
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Read my post above. With Tegrak you can overclock stock rooted ROMs.
Baldilocks said:
Read my post above. With Tegrak you can overclock stock rooted ROMs.
Click to expand...
Click to collapse
Yes sir I know. But I just want to give other options. So that he can choose which is good for him. He can overclock upto 1800mhz in siyah kernel. But afaik, he is more on overclocking with undervolting to have performance and battery life.
Sent from my GT-I9300 using xda app-developers app
Thank you all for your good advise... now i know why i cant set my CPU speed due to kernel.
Will look into trying other kernel if i really like to control my CPU.
Baldilocks said:
Read my post above. With Tegrak you can overclock stock rooted ROMs.
Click to expand...
Click to collapse
Pal, i believe you have tired this apps, is this apps dangerous and diffcult to use?
mrlow81 said:
Pal, i believe you have tired this apps, is this apps dangerous and diffcult to use?
Click to expand...
Click to collapse
Nope. Pretty straightforward and it's been around for a while now. Used it with my Galaxy S II as well.
BelJanss said:
Yes sir I know. But I just want to give other options. So that he can choose which is good for him. He can overclock upto 1800mhz in siyah kernel. But afaik, he is more on overclocking with undervolting to have performance and battery life.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
And you are very right!!!!! Doesnt matter what app you use u cant overclock on stock kernel!!!! Stock kernel doesnt have the provision for that. And if members who send links read those links properly before they send them they will realise that you need a kernel that supports overclocking like siyah!!!!!!!!!!!! Stock kernel doesnt.
art_arev said:
And you are very right!!!!! Doesnt matter what app you use u cant overclock on stock kernel!!!! Stock kernel doesnt have the provision for that. And if members who send links read those links properly before they send them they will realise that you need a kernel that supports overclocking like siyah!!!!!!!!!!!! Stock kernel doesnt.
Click to expand...
Click to collapse
You need to actually go look at the Tegrak app before you start typing....
During the installation of the viper3D (275) ROM I can choose between clockspeeds (I'm using the synergy ROM atm so I know I can overclock it to 1,7ghz and still be stable) the gout clock can be raises to 320, is this safe? And as last what is the difference between ROM controlled overclocking and kernel controlled overclocking?
Sent from my PG86100 using xda app-developers app
Th3_Frank_XD said:
During the installation of the viper3D (275) ROM I can choose between clockspeeds (I'm using the synergy ROM atm so I know I can overclock it to 1,7ghz and still be stable) the gout clock can be raises to 320, is this safe? And as last what is the difference between ROM controlled overclocking and kernel controlled overclocking?
Sent from my PG86100 using xda app-developers app
Click to expand...
Click to collapse
Overclocking is all in the kernel. The GPU clock speed (the one you're referring to at 320mhz) is the graphics processor, technically its not being overclocked, its being brought back up to the Qualcomm default speed
Sent from my PG86100 using Tapatalk 2
Isnt qualcomm stock speed at 300 mhz?
However it should be save...
Th3_Frank_XD said:
During the installation of the viper3D (275) ROM I can choose between clockspeeds (I'm using the synergy ROM atm so I know I can overclock it to 1,7ghz and still be stable) the gout clock can be raises to 320, is this safe? And as last what is the difference between ROM controlled overclocking and kernel controlled overclocking?
Sent from my PG86100 using xda app-developers app
Click to expand...
Click to collapse
I would suggest you dont go anywhere near 1.4 ghz....All other setting....leave it at htc default...Vsync=off and the last option..make sure you choose.Rom MAnage cpu clock or something.......i forget the words...i met trouble letting kernel manage the cpu clock....