Webos 3.0.477 is available via system updates. I am downloading it now.
Do we know if this is safe to accept w/ CM7 installed?
x.v_ said:
Do we know if this is safe to accept w/ CM7 installed?
Click to expand...
Click to collapse
Do I have to roll back the kernel for this update? I am Running Uber.
x.v_ said:
Do we know if this is safe to accept w/ CM7 installed?
Click to expand...
Click to collapse
Updates in either OS should not affect the other.
People over at the "other" forum have reported the update breaking moboot. Not sure if it can just be reflashed but just a heads up.
Sent from my PG06100 using Tapatalk
Darn, the update didn't fix my wifi issues. My touchpad won't detect any wifi access point period. Its like the wifi radio doesn't turn on. Any suggestions?
crump84 said:
People over at the "other" forum have reported the update breaking moboot. Not sure if it can just be reflashed but just a heads up.
Sent from my PG06100 using Tapatalk
Click to expand...
Click to collapse
Yes, all that is needed after the update is re-installing moboot.
Just updated. Trying the browser now. Don't see anything different or any problem.
Do we have to change the kernel or revert any patches etc to update?
Just updated and did loose moboot and some of my preware patches. Had to go uninstall the patches and reinstall them from preware. I'll have to reflash moboot when I get a chance.
Yeah you will lose moboot but just really run the acmeinstaller and all should be good on the cm side. All my apps and settings remained intact.
Sweet. Moboot back installed with no problems and everything is back to normal.
My update failed miserably and I had to Doctor my TP back to life.
Confirmed for me too...ACMEInstalled just moboot and everything back (minus preware patches) as before.
which preware patches are affected by this?
tinnef said:
My update failed miserably and I had to Doctor my TP back to life.
Click to expand...
Click to collapse
I'm uploading a 304 doctor for those people that the OTA failed.
mine didn't want to update so
i hate java web start.
UPDATE: here is the link:
http://www.multiupload.com/762XCTTMUX
I would like to do a WebOS Doctor anyway. I'm the type of person that wipes his phone every time an update comes out for 100% stability =P
My question is... I used "Save/Restore" to back up data from apps. If i WebOS Doctor, is the Save/Restore data erased as well? Or is that put in "storage" and not erased?
bigblueshock said:
I would like to do a WebOS Doctor anyway. I'm the type of person that wipes his phone every time an update comes out for 100% stability =P
My question is... I used "Save/Restore" to back up data from apps. If i WebOS Doctor, is the Save/Restore data erased as well? Or is that put in "storage" and not erased?
Click to expand...
Click to collapse
well all my apps are restoring.
and this is even b4 save/restore
save/restore data should be fine since it's on the usb partition.
http://forum.xda-developers.com/showthread.php?t=1308920
Thanks, I was just worried about a couple of saved games such as Slice It and Need for speed. lol
Just tried the OTA update and when it has downloaded and I press install it thinks a bit, then goes to reboot, then I hit moboot menu and even if I choose webOS there it says update failed.
any ideas?
Related
I have always used ROM Manager to do everything, but seeing that might not be the best way to do things..I have been having some other problems with restoring, and talked about it on another forum, but can't post the link here yet.
So, my nightlys said it is time to upgrade, so I am going to completely back everything up with TB, and fire it all up to dropbox. All of my system settings are 100% the way I want them... I also clicked the beta migration option in the preferences, hoping that would help me.
Step 1 - Backup all user apps + system Data
Step 2 - Sync to Dropbox
Step 3 - Boot into Clockwork Mod Recovery, and do everything manually, not through ROM Manager
Step 4 - Clear cache and Dalvik
Step 5 - Run zip from SD Card
This time, it seemed like everything went as planned. When I started the phone back up, all the apps were in the same spot, and wallpaper was the same. Although, the first time, when the screen timed out, I couldn't turn it back on. Pulled the battery, and all is working fine now.
Step 6- went into TB and did a batch restore of all apps and data, but only clicked the green items. From reading somewhere else, it is only wise to do the green items, not the red, so that is what I did. Then reboot for all to take effect.
This is where I am confused. None of my data is restored. For example, I use K-9 Mail, and the settings aren't restored by the batch. But, if I go to that app, and hit the restore data, then it restores it fine. So, for me to do all my apps, the batch function isn't working, I have to go through and do 15-20 apps manually.
So, what am I doing wrong here? Why isn't the batch operation working properly for me?
Edit - Something else I noticed that didn't restore properly was any of my ring tones. Not a huge deal, but I thought might be worth mentioning in this dilemma.
So I assume you are on CM7 as you refer to nightlies.
You say that you wipe cache/dalvick cache and install. Then when you reboot all your apps are in the right place?
Then why on earth would you want restore your apps on top of the existing apps with TB? Maybe that is causing the problem. AFAIK upgrading with a nightly shouldn't touch your installed apps.
Did you check the app settings before restoring with TB?
As for the ringtones, I always had that problem when using CM7, just got used to fixing them after installing each nightly.
Hope this helps.
What version of TB are you using? I was having a similar problem doing restores on v3.9.0.1 and was having problems doing batch recovery with my SGS2. The status bar would come up but wouldn't successfully finish. I then upgraded to 4.0.0.0 and everything seems to work.. might give that a try if you're using an older version.
killall said:
So I assume you are on CM7 as you refer to nightlies.
You say that you wipe cache/dalvick cache and install. Then when you reboot all your apps are in the right place?
Then why on earth would you want restore your apps on top of the existing apps with TB? Maybe that is causing the problem. AFAIK upgrading with a nightly shouldn't touch your installed apps.
Did you check the app settings before restoring with TB?
As for the ringtones, I always had that problem when using CM7, just got used to fixing them after installing each nightly.
Hope this helps.
Click to expand...
Click to collapse
Yes, sorry, I am running CM7, but using the nighties.
As far as the apps, that's why I think I am doing something wrong. Last time was the first time everything was there, every other update, it was like I was starting off with a new phone. No app, no data, nothing. A brand new fresh start.
I will try it again in a few minutes and hope for the best..
Thanks for helping out with this one..
bringit8 said:
What version of TB are you using? I was having a similar problem doing restores on v3.9.0.1 and was having problems doing batch recovery with my SGS2. The status bar would come up but wouldn't successfully finish. I then upgraded to 4.0.0.0 and everything seems to work.. might give that a try if you're using an older version.
Click to expand...
Click to collapse
I am currently using the Pro, 4.0.2. It just seems that I have to refresh all the data for each app by themselves, but all at once won't work.
Upgrading my nightly now, so keeping my fingers crossed that it will work.
With the forward progress of the Android Alphas, I feel like my touchpad is teetering and slowly becoming more and more cluttered. Call me an OCD freak but right now I need help going back to square one;
I want to wipe the touchpad completely, of android, webos, all data.
Reinstall webos fresh and clean and updated.
Install the 3.5 release of the android alpha
continue loving my touchpad
If anyone knows what I need to accomplish these goals, let me know? Thanks.
use WebOS doctor and wipe everything clean).
Then open webos, do anything you need to do there.
Then install android on it.
FatalIll said:
I feel like my touchpad is teetering and slowly becoming more and more cluttered. Call me an OCD freak but right now I need help going back to square one
Click to expand...
Click to collapse
i feel the same
FatalIll said:
With the forward progress of the Android Alphas, I feel like my touchpad is teetering and slowly becoming more and more cluttered. Call me an OCD freak but right now I need help going back to square one;
I want to wipe the touchpad completely, of android, webos, all data.
Reinstall webos fresh and clean and updated.
Install the 3.5 release of the android alpha
continue loving my touchpad
If anyone knows what I need to accomplish these goals, let me know? Thanks.
Click to expand...
Click to collapse
There is a preware app that removes everything android, that's out. I have not tried it but it sounds good if you want to start over.
Web-doc does not remove all the files and folders. I thank it just changes the format.
so no one knows a way to just format everything?
Wipe Everything
I also would like to know how to wipe everything including all android partitions and ext3fs partitions (from ubuntu). I think I read somewhere the doctor doesn't rewrite partition tables. Any help would be great!
I would assume do a acmeuninstall then webos doctor it
Sent from my Touchpad using xda premium
Hi everyone, new to xda.
I also thought it would be a good idea to wipe my TP clean and re-install with the latest version of xron's build. I've had every version of cm7 since it was first released and countless apps, so it was kind of cluttered up. Anyway, uninstalled with the acmeuninstaller and then did a factory erase in webos. Went about my business as usual with the acme installer (with cwm and moboot and the newest xron). Thought all was well until I boot to cwm, no cyanogenmod option! I flashed it using cwm, but I heard somewhere they don't recommend that, so I started over again, and flashed EVERY release from day 1 to the latest one. TP seems cleaner and less cluttered, but I was wondering why the acmeinstaller wouldn't recognize the xron file and install it?
FatalIll said:
With the forward progress of the Android Alphas, I feel like my touchpad is teetering and slowly becoming more and more cluttered. Call me an OCD freak but right now I need help going back to square one;
I want to wipe the touchpad completely, of android, webos, all data.
Reinstall webos fresh and clean and updated.
Install the 3.5 release of the android alpha
continue loving my touchpad
If anyone knows what I need to accomplish these goals, let me know? Thanks.
Click to expand...
Click to collapse
web doctor-device info-reset options-secure full erase-reload android
apbling said:
Hi everyone, new to xda.
I also thought it would be a good idea to wipe my TP clean and re-install with the latest version of xron's build. I've had every version of cm7 since it was first released and countless apps, so it was kind of cluttered up. Anyway, uninstalled with the acmeuninstaller and then did a factory erase in webos. Went about my business as usual with the acme installer (with cwm and moboot and the newest xron). Thought all was well until I boot to cwm, no cyanogenmod option! I flashed it using cwm, but I heard somewhere they don't recommend that, so I started over again, and flashed EVERY release from day 1 to the latest one. TP seems cleaner and less cluttered, but I was wondering why the acmeinstaller wouldn't recognize the xron file and install it?
Click to expand...
Click to collapse
I think you need to rename the xron filename to start with "update-...." and then do the acmeinstall with remaining 2 files i.e. cmw n moboot
Sent from my GT-I5700 using Tapatalk
since installing android partitions the memory, wouldn't you have to remove the android partition first in order to truly wipe the touchpad?
Once the partition is removed, you could use OS doctor to wipe what's left, and start fresh. At least that's what I'm thinking.
I read elsewhere that you can format the Touchpad in a Linux distro and remove all of the partitions. I have not tried it but I will when I get home and have a better internet connection.
OK, I'm a noob and made the noob mistake of deleting (rather than freezing) some system apps after rooting. Won't make that mistake again.
I do not have backups nor am I completely sure which apps are missing. As a result of these missing apps I cannot complete the latest OTA update.
I downloaded a system dump and noted a few apk files in it that were not on my system though I believe that there are other apk files missing which are not in the system dump (MyLibrary, WebStorage etc) so I am not sure the particular system dump I got is up to date.
Copying the apk files to my system\app folder did not help, the update still fails.
I seem to recall seeing instructions somewhere for manual installation via power/down volume which would allow you to see a text dump of the update with reports of missing files or mismatched CRC's. I cannot find this again but such a thing would help me determine what is missing so that I can then attempt to find replacement apk files.
Sorry for being such a noob. Can anyone help?
Thanks
Made the same mistake when upgrading to ICS from Honeycomb...
If you get the previous update (the one your running now) from the Asus website, extract the update file and place it in one of the folders on the tablet, (I forgot which folder, sorry...) reboot and the tab will recognize it and prompt you to update. Once that update is finished installing, you should have all your bloat back. Delete the update file from the tab since you don't need it anymore, and then try to update to the most recent OTA Update.
Just do a search in the TFP forums and you should find complete instructions on how to do this.
I'm just assuming this will work for ICS to ICS... because it worked for me when I updated to ICS to Honeycomb...
Hope this method works for you.
I had the same issue.
Download:
http://dlcdnet.asus.com/pub/ASUS/EeePAD/TF201/US_epaduser9_4_2_11UpdateLauncher.zip
Once downloaded, extract the contents of the zip file (yes, its another zip file of the same name inside) to your MICRO SD. put your micro SD in your TF201 (or eject and re-insert if you copied via cable)
Once the card is mounted you will see a triangle with an "!" in the notification area. Touch the notification and it will open a dialogue to install the manual update.
You will lose root, even with OTA Rootkeeper.
Re-root your device. Install OTA Rootkeeper if you have not already. Run Voodoo OTA Rootkeeper. Protect your su.
Check for updates. Install .13 OTA.
$$$
Should be a lesson learned. Stop messing with system apps. Always causes problems one way or another. The apps included are nothing to even be considered bloat. I still have everything installed n prime super fast. If anything just freeze the apps, never delete them unless u always want to have failed OTA.
demandarin said:
Should be a lesson learned. Stop messing with system apps. Always causes problems one way or another. The apps included are nothing to even be considered bloat. I still have everything installed n prime super fast. If anything just freeze the apps, never delete them unless u always want to have failed OTA.
Click to expand...
Click to collapse
I agree completely, and my lesson is learned. But why on earth would a freaking E-reader app be a system app?
That was my hangup. AsusReader a/k/a the My Library app.
And mine was backed up with Titanium, which obviously bungled it since it would not restore.
phree1 said:
I agree completely, and my lesson is learned. But why on earth would a freaking E-reader app be a system app?
That was my hangup. AsusReader a/k/a the My Library app.
And mine was backed up with Titanium, which obviously bungled it since it would not restore.
Click to expand...
Click to collapse
I went through the same thing on my Atrix phone. Rooted n went messing around deleting at&t bloatware. It killed my OTA updating. That's why now I'm still on froyo on it. Never bothered to manually update it. Still works great on froyo though. But I learned my lesson from that.
demandarin said:
I went through the same thing on my Atrix phone. Rooted n went messing around deleting at&t bloatware. It killed my OTA updating. That's why now I'm still on froyo on it. Never bothered to manually update it. Still works great on froyo though. But I learned my lesson from that.
Click to expand...
Click to collapse
Your still on froyo... why not just flash a sbf file to return to stock? Or better yet, unlock the boot loader and get yourself CM7 already.
Messing with system files isn't a big deal, as long as you have a backup.
Sent from my Transformer Prime TF201 using xda premium
Yep, this did the trick. Thanks very much.
Lesson learned, don't mess with the system apps.
Ok so i was having some laggy issues w the x2 and all the sudden i started getting process not working for things like nova laucher and such. SO i went into BSR to wipe cache and fix the permissions. Did that and now the phone sits on the Big M boot screen. Why wont it boot up. I didnt wipe dat or try to flash anything. Any way to get the phone up and runnig again w/ o SBF'g
jeff5347 said:
Ok so i was having some laggy issues w the x2 and all the sudden i started getting process not working for things like nova laucher and such. SO i went into BSR to wipe cache and fix the permissions. Did that and now the phone sits on the Big M boot screen. Why wont it boot up. I didnt wipe dat or try to flash anything. Any way to get the phone up and runnig again w/ o SBF'g
Click to expand...
Click to collapse
Well what ROM are you using for starters.
that might be important right.. .sorry.. its aokp 6
Ok. Well if you can get back into BSR, try and wipe the dalvik cache in the advance settings. I never use the fix permissions option. Maybe that did something to your device.
did that too. Still on the boot logo. is a sbf in order
jeff5347 said:
did that too. Still on the boot logo. is a sbf in order
Click to expand...
Click to collapse
Well I wouldnt see why it would do that if you just wiped cache and fixed permissions. Did you have any other mods on there? Were you using the patched CM7 BSR and not the original one?
i was using the motodx2_bootstrap_signed.apk. Not sure if the cm7 or not. Ive used this on eclipse and aokp
jeff5347 said:
i was using the motodx2_bootstrap_signed.apk. Not sure if the cm7 or not. Ive used this on eclipse and aokp
Click to expand...
Click to collapse
That one is fine to use on Eclipse. But pretty much any other ROM we have (CM7, CM9, CM10, AOKP, Paranoid Android and I think even MIUI), you need to use the CM7 BSR named "MOTODX2_Bootstrap-CM7-signed.apk" which is found in the CM7 thread. That may have been the problem.
really... damn. i dl'd it so when i flash cm10 but did not install it for thw aokp. Just off your thoughts is the cm10 stable enough now to install. i have no prob putting aokp back on but im nott looking for stability problems. If cm10 isnt stable yet i van wait
jeff5347 said:
really... damn. i dl'd it so when i flash cm10 but did not install it for thw aokp. Just off your thoughts is the cm10 stable enough now to install. i have no prob putting aokp back on but im nott looking for stability problems. If cm10 isnt stable yet i van wait
Click to expand...
Click to collapse
I think CM10 is more stable than any of the ICS ROMs. But with the stability, there comes other small issues that the ICS ROMs dont have. Its a trade off. Main issues of CM10:
1. Messing with bluetooth may cause phone to crash durring calls. Reboot fixes it until bluetooth is messed with again. (Might be fixed with an update)
2. Storage is in a different location. Not really an issue but its also swapped back to the original 4gigs for the internal. All your files will be flipped after using other ROMs for so long. (not a huge deal)
3. Due to the storage being moved around, apps that are stored on the SD card will disappear after reboot. (will probably be fixed in the future)
4. Flashing ROMs in recovery wont work. If any update comes out, you have to either SBF and update or nandroid back to ICS and update. (again, not a huge issue)
Other than that, I cant really think of any bad stuff. Its faster and I have no random reboots. I recommend it if you can live with the issues I mentioned which are honestly not bad.
Also, with the BSR files, in case you dont know already. When you are on stock 2.3.4, you first use the original BSR. Then when you flash CM10, you install the CM7 BSR.
Thanks JS
1. I never use blue tooth so then i should be all set then.. correct?
2. didnt aokp have that. I know the eclipse rom had the flip flop in it to read right but aokp i had to move my music and such so wouldnt i still be in the same boat or is it different than oakp?
3. i have some apps.. such as thems i have downloaded off of xda. So once installed they will work but rebooting will make them dissapear? is there a way to put these on the phone memory? Also curious i have google drive and have some of these installed on the drive. Will they still work or do they just dl to the sd and still not work?
4 i dont have a problem sbf'g but wondering if i nandroid the a2, will i be able to sbf, install root, a3 ect and do a data restore to get my info back?
also i will take the cm7 bsr and remeber that. Thanks
jeff5347 said:
Thanks JS
1. I never use blue tooth so then i should be all set then.. correct?
2. didnt aokp have that. I know the eclipse rom had the flip flop in it to read right but aokp i had to move my music and such so wouldnt i still be in the same boat or is it different than oakp?
3. i have some apps.. such as thems i have downloaded off of xda. So once installed they will work but rebooting will make them dissapear? is there a way to put these on the phone memory? Also curious i have google drive and have some of these installed on the drive. Will they still work or do they just dl to the sd and still not work?
4 i dont have a problem sbf'g but wondering if i nandroid the a2, will i be able to sbf, install root, a3 ect and do a data restore to get my info back?
also i will take the cm7 bsr and remeber that. Thanks
Click to expand...
Click to collapse
1. I use bluetooth every now and then but I never turn it off. It seems that toggling the bluetooth on and off or visa versa triggers the issue and a reboot fixes it again.
2. I forget what Eclipse had. Its been so long. But ever since CM7, the flip flop mod has been included in all the ROMs which meant you got your SD card (which the droid X2 comes with 8GB) as internal storage and the actual 4GB internal storage was turned into the "external storage." CM10 reverted back to the original 4GB internal and 8GB external.
3. Everything you download and install on your phone will usually be installed on the internal storage. I think if you have apps over a certain size (which isnt very many. Mostly games), they are installed on your SD card. Those are the ones the system has a problem reading after a reboot. the actual files you have downloaded from XDA will still be there. Just installed apps might disappear.
4. Not really sure what you are asking here. But if you get A2 installed and up and running and A3 comes out, You will pretty much need to start over. But for me, thats fine. I use Titanium Backup and restore everything after a wipe anyway. What data are you referring to?
ok so this is the gapps md5
MD5sum: f62cfe4a827202899919fd932d5246d7
and gapps-jb-20120726-signed.zip
is this correct
jeff5347 said:
ok so this is the gapps md5
MD5sum: f62cfe4a827202899919fd932d5246d7
and gapps-jb-20120726-signed.zip
is this correct
Click to expand...
Click to collapse
Honestly, I dont even know what MD5sum means. I'm not that tech smart. lol. I know thats the right file name though. And if you got it from here: http://goo.im/gapps you should be fine.
hahaha neither do i lol yea thats where i got it.. again thank you
No problem. If you have any other issues, just reply here and I'll help out.
one last th. sbf'd. trying t oroot with petes like i always have but it wont recognize the phone i enables debugging and unknown sources. Am i forgetting something. havent done this in a bit
jeff5347 said:
one last th. sbf'd. trying t oroot with petes like i always have but it wont recognize the phone i enables debugging and unknown sources. Am i forgetting something. havent done this in a bit
Click to expand...
Click to collapse
Pete's can be a PITA... If usb debug is enabled and unkown sources is checked just keep trying. I've had to "one click" 5 or 6 times before it works right. Close the program between tries. Also make sure your phone isn't in PC charge mode or anything.
Sorry for not updating this. After trying for 2 hrs I started trying everything. It turned out I had to use the cable that came w the dx2. No other cables worked
Sent from my MB870 using xda premium
Ah, my bad I should have read the time stamp. Anyway yea, the cable is a big deal (even though that sounds crazy.)
---------- Post added at 10:54 PM ---------- Previous post was at 10:43 PM ----------
Lol oh and btw MD5 checksums are
"The MD5 checksum for a file is a 128-bit value, something like a fingerprint of the file. There is a very small possibility of getting two identical checksums of two different files. This feature can be useful both for comparing the files and their integrity control."
I've tried several times to install the custom ICS ( [ROM] CM9 / LiquidSmooth / AOKP / Random ICS ), but WiFi is not coming on.
Any ideas how to resolve this?
Better yet, I am trying to flash the latest ICS ROM to my thunderbolt that is stable.
Seems most have some sort of reboot problem
So far I have tried all the Liquid Smooth - very nice ROMs but get random reboot
PS
From about phone, I see the following
Mode version: liquid mecha.mr3.100212
Build number: Liquid ICS v1.5MR3-JMOD
Radio: 2.00.00.0308, 0.02.00.0312r
brochild said:
Better yet, I am trying to flash the latest ICS ROM to my thunderbolt that is stable.
Seems most have some sort of reboot problem
So far I have tried all the Liquid Smooth - very nice ROMs but get random reboot
PS
From about phone, I see the following
Mode version: liquid mecha.mr3.100212
Build number: Liquid ICS v1.5MR3-JMOD
Radio: 2.00.00.0308, 0.02.00.0312r
Click to expand...
Click to collapse
Maybe THIS helps?
I just stumbled unto that site by accident (I love it)
I have registered and downloaded the nusense ROM (Beta v10.8) and will report my findings.
Thanks for the great work(on your ROM) and for the quick reply.
brochild said:
I just stumbled unto that site by accident (I love it)
I have registered and downloaded the nusense ROM and will report my findings.
Thanks for the great work(on your ROM) and for the quick reply.
Click to expand...
Click to collapse
No problem, hope you enjoy.
There's also a DeSensed version, called UnSense, which you likely saw as well.
See ya around that way.
Yes, I saw it and am trying to learn the differences between these 2 ROMs - so far better battery life stands out
Looks like I will be spending a lot more time there.
By the way, I was looking at your ext4 instructions (re-printed below for clarity - hope you don't mind)
Select Wipe/Format Menu Option
Wipe cache and dalvik
In the same Wipe/Format Menu: Wipe all partitions except SD
Now back in 4ext main menu: Select Tools
Select Format ext3 option I chose ext4 instead of ext3
Format Cache
Format Data
Format System
Now go back to the main menu and select the rom .zip to install
I chose ext4 instead of ext3 - could this be the cause of my random reboots using Liquid Smooth ICS ROM?
When I flash your ROM, I will choose to format ext3 - just to be sure (heh heh heh):laugh:
brochild said:
By the way, I was looking at your ext4 instructions (re-printed below for clarity - hope you don't mind)
Select Wipe/Format Menu Option
Wipe cache and dalvik
In the same Wipe/Format Menu: Wipe all partitions except SD
Now back in 4ext main menu: Select Tools
Select Format ext3 option I chose ext4 instead of ext3
Format Cache
Format Data
Format System
Now go back to the main menu and select the rom .zip to install
I chose ext4 instead of ext3 - could this be the cause of my random reboots using Liquid Smooth ICS ROM?
When I flash your ROM, I will choose to format ext3 - just to be sure (heh heh heh):laugh:
Click to expand...
Click to collapse
You can't use ext4 file system with nusense or unsense yet because the kernel doesn't support it. The random reboots with twisted ics could be related but I can't be sure since I haven't used it in a while.
Sent from my ADR6400L using Tapatalk 2
I tried the nusense ROM and formatted using ext3
Am still getting WiFi to drop randomly
At times it turns itself off - when it does that I see "out of range'.
Google Market changed to "Google Play", and most of the times that process stops working and prevent me from installing my apps
WiFi turns off and prevent update from Google Play as well - since I have it setup to update over WiFi
Also, am getting lots of process is not responding messages like "process.com.android.phone is not responding"
I get these messages very frequently.
I may go back to using LiquidSmooth ICS8 mr3v1
Are you sure you formatted all the partitions in ext3? The only way I get those messages are when I don't format properly. Also, maybe try clearing cache and data in the phone app and as for the market trying clearing data and cache. It may not hurt to run a fix permissions in the recovery. Does you wifi problem only happen with ics roms?
Sent from my ADR6400L using Tapatalk 2
If you do not format all partitions in ext3 format, you will have issues.
If you are not waiting until after the initial setup to sign into the market, that is likely an issue.
You need to wait until the home screen has set up and the device settles.
Then reboot, wait a minute and then sign into the market.
In my FAQ, you will see, the Market is the Play Store, no difference, just themed.
It has updated since the rom's last update and will do so when you sign in.
It's just an incremental update, but the theme goes away that I included for it an so does the custom icon and "Market" name.
If you do the above and still have issues, clearing the market (Play Store) app data and cache should sort you out.
If you are restoring data from another rom, then that is why you are also having force closes or wifi issues.
You cannot restore wifi data from an AOSP based rom that uses a GB kernel and expect that the same config will work well with the ICS rom and kernel.
disconnecktie said:
Are you sure you formatted all the partitions in ext3? The only way I get those messages are when I don't format properly. Also, maybe try clearing cache and data in the phone app and as for the market trying clearing data and cache. It may not hurt to run a fix permissions in the recovery. Does you wifi problem only happen with ics roms?
Sent from my ADR6400L using Tapatalk 2
Click to expand...
Click to collapse
Yes, I am sure I formatted the partition in ext3
I cleared data, davlik factory reset etc
The only thing I did not do was "fix permission"
After installing all my apps, I booted to recovery and did the swipe thing again
Yes, my WiFi issue is only with ICS ROM, specifically this one (during and after setup)
So far the LiquidSmooth ICS 1.5 MR3 is working the best for me.
No WiFi issues at all, but I still do get occasional reboots.
Did you wipe boot and system partitions before flashing the rom?
Sent from my ADR6400L using Tapatalk 2
santod040 said:
If you do not format all partitions in ext3 format, you will have issues.
Click to expand...
Click to collapse
Yep, I did that
santod040 said:
If you are not waiting until after the initial setup to sign into the market, that is likely an issue.
You need to wait until the home screen has set up and the device settles.
Then reboot, wait a minute and then sign into the market.
Click to expand...
Click to collapse
I waited as instructed
santod040 said:
In my FAQ, you will see, the Market is the Play Store, no difference, just themed.
It has updated since the rom's last update and will do so when you sign in.
It's just an incremental update, but the theme goes away that I included for it an so does the custom icon and "Market" name.
If you do the above and still have issues, clearing the market (Play Store) app data and cache should sort you out.
Click to expand...
Click to collapse
I followed your instructions to the letter
santod040 said:
If you are restoring data from another rom, then that is why you are also having force closes or wifi issues.
You cannot restore wifi data from an AOSP based rom that uses a GB kernel and expect that the same config will work well with the ICS rom and kernel.
Click to expand...
Click to collapse
I am starting WiFi from scratch by turning it on, wait for it to scan and locate available networks.
Then I select my SSID and enter my keys to activate it.
At times I am downloading from Google Play, and will loose WiFi intermittently.
At times, I am viewing email messages, and will loose WiFi intermittently.
I was tempted to downgrade my RADIOS -but decided to go back to LiquidSmooth ICS 1.5 MR3
disconnecktie said:
Did you wipe boot and system partitions before flashing the rom?
Sent from my ADR6400L using Tapatalk 2
Click to expand...
Click to collapse
Yes Sir, I did all that
I really appreciate all your efforts and your replies both to you and to Santod, I really, really do!
At this time, I resign myself to the fact that some of these ICS ROMs are not yet in their final stages and will wait patiently.
A huge Thanks for the great work to all developers, busting their humps to get this done.
I'm back baby
A funny thing happened to me yesterday, and I'm still laughing
Previously, I mentioned that I was tempted to downgrade my radio, but decided to go back to Liquid ICS v1.5MR3V1
So far I was still getting random reboots - way too many for my taste.
After reading numerous posting, I decided to roll back my radio from 2.00.00.0308, 0.02.00.0312r to 1.49.00.0406w_1,0.01.79.0331w_1.
But, in doing so, I accidentally installed the leaked ICS ROM instead (2.11.605.19).
So I thought I was downgrading my radio, but ended up installing the leaked ROM :laugh:
Incidentally, I also un-rooted my T-bolt - Thanks to the new tool I was able to quickly root it back.
Luckily, I also backed up the previous ROM, and was able to restore it.
All in the sudden, my T-bolt is back - everything is working fine and no more reboots :victory:
To Recap, after downgrading my radio to the leaked radio 1.49, all is well again .
My T-bolt is running so good that I am hesitant to load the latest ROMs.
My choices are the nuSense beta 17.2 or AOSP 4.0.4 ICS [Multi-Source]
Is it a wise decision to upgrade or should I stay put
That updated nusense is amazing but I wouldn't run it with the full leaked radios. I use the combo of the. 19/leaked radios and they work great.
Sent from my ADR6400L using Tapatalk 2
Why should I try NuSense ROM by Santod
disconnecktie said:
That updated nusense is amazing but I wouldn't run it with the full leaked radios. I use the combo of the. 19/leaked radios and they work great.
Sent from my ADR6400L using Tapatalk 2
Click to expand...
Click to collapse
Thank you sir, for your prompt reply!
Sounds like I need to give the NuSenseROM a try, but ....
1) what's so amazing about it, and how does it differ from what I'm currently using (where can I get screenshots)
a) I know its been reworked - but that's over my head (for now)
2) I am not entirely sure what the combo 19/leaked radio is, is it this ".19 cdma and the ICS LTE radio" posted by Santod?
Thanking you in advance.
1) Basically everything works the way it was intended to. Camcorder included. Only drawback is battery is slightly worse than Twisted's build.
A) He rebased the rom using the official Droid Incredible 2 ota which is a better base since the original base was from the leak that sucked balls big time.
2) Yes
Sent from my ADR6400L using Tapatalk 2
I now have the NuSenseROM installed - so far so good.
No reboots yet and I am still using the 1.49.00.0406w_1,0.01.79.0331w_1 radio
The ROM is nearly flawless, but I wish it had the phone dialer interface, and the people interface of the Liquid Smooth ROM
I love the fact the camcorder works, but I wish it also had the ICS camera (But I can download it).
I am using Go SMS Pro, and this ROM is not linking my accounts pictures there (bummer)
The Liquid Smooth ROM showed my accounts picture on that app.
I am using and synchronizing my Google, Verizon, Facebook, and Voxer accounts