Small problem here, wondering if anyone else is having this issue.
Used the kernel with two different roms pwgb and tsm1.0, same result. The phone just restarts itself. Did a clean flash. Problem does not happen on the 9/28ish release of the kernel. Any suggestions?
Sent from my SCH-I500
mkuehl06 said:
Small problem here, wondering if anyone else is having this issue.
Used the kernel with two different roms pwgb and tsm1.0, same result. The phone just restarts itself. Did a clean flash. Problem does not happen on the 9/28ish release of the kernel. Any suggestions?
Sent from my SCH-I500
Click to expand...
Click to collapse
From what I've read recently the 10/18 build has some issues. I'm running TSM 1.0 with the 10/12 build and it's pretty stable.
I had my best results with the 9/28 and 10/5 tks kernal. The reboots started for me at 10/10 for me... for some reason disabling lagfix cured the reboot/lag for me, but I don't know how or why to be honest.
droidstyle said:
I had my best results with the 9/28 and 10/5 tks kernal. The reboots started for me at 10/10 for me... for some reason disabling lagfix cured the reboot/lag for me, but I don't know how or why to be honest.
Click to expand...
Click to collapse
There have been a lot of people saying they had to disable lagfix to stop the lag. I get lag regardless of whether it's enabled or not, but my quadrant score goes from the 940's to above 1500. Wish my performance matched the numbers...
Related
I've never really had problems with cam scanner before and I installed this rom by odining stock and then flashing bionix and i did this about 4 times to try to get this to work. I have installed the camera fix that they just posted and i still have this issue. Anyone willing to try and see if they have the same problem?
Me too
not only camscanner being forced closed, but also fxcamera on my Bionix-v 1.3
but there is no problem on Bionix-v 1.2.1
anyone can solve it? thanks.
Me three...camcard causes my phone to reboot.
Ditto, camscanner reboots the phone every time I snap a photo and then press the ok or cancel buttons. 1.3 with fix.
I have the same problem. I guess I have to go back to the previous version since I need to use the CamScanner. I hope some one will come up with a fix. Thank you.
IIRC, it's a problem with the kernel used. I never had camera issues, just mic and that was fixed with OverStock1.1. I believe if you update to the current one (OverStock1.3 now, I think), your camera should be fine after that.
Oniyuri said:
IIRC, it's a problem with the kernel used. I never had camera issues, just mic and that was fixed with OverStock1.1. I believe if you update to the current one (OverStock1.3 now, I think), your camera should be fine after that.
Click to expand...
Click to collapse
Have you personally tried? Ill test it out in a bit unless someone else has already tried this. Thanks for the suggestion
Nirmalspeed said:
Have you personally tried? Ill test it out in a bit unless someone else has already tried this. Thanks for the suggestion
Click to expand...
Click to collapse
Well, it seemed that the origin for the problems that appeared in the initial release was with the kernel (which was Overstock1.0). I never had any issues with my camera like some ppl had reported in the thread (Som did say that was a hit or a miss issue and I guess it missed me thankfully). My issue was with my mic not working with my headphones and that was solved by updating the kernel (like Som said before he posted the fix). Check out cmenard's OverStock thread in the dev section, I'm pretty sure a ton of ppl have already submitted lots of feedback on the newest kernel.
Yea the new kernel update fixed the problem. I believe both overstock and CWK have the fix working.
i tried it and it worked 4 me...
i am presently on bionix v 1.3 with the latest overstock 1.3 kernel and it has cleared up my camera problems!
trying bionix v 1.3.1 next but still checking out 1.3 for now...
i was wondering what everybody was running? Im still on evil fascinate, ed04 (which sucks), with a standard volt kernel running overclocked at 1.24 or it gets all glitchy and force closes. Im wondering what rom, kernel, radio combo works the best these days. Ive been reading all sorts of stuff and am just not oo sure what to go with. I use my phone alot for web surfing, a few games, music, etc. I also wondered if my aftermarket extended battery will work. any insight is greatly appreciated. Thanks to all the devs that make this possibel cause without them this phone really sucks ass.
I have been searching for a great daily and after trying the cm7.1 Rom I thought it was great, the only deal breaker for me was the sound issues with speakerphone. So i tried powerwashed and think is great, very stable and reliable.
Hope that helps, try it see what you think.
Sent from my SCH-I500 using XDA App
benfikaman said:
I have been searching for a great daily and after trying the cm7.1 Rom I thought it was great, the only deal breaker for me was the sound issues with speakerphone. So i tried powerwashed and think is great, very stable and reliable.
Hope that helps, try it see what you think.
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
honestly im not sure how you could consider the speakerphone echo a deal breaker on cm7.1... thats a very minimal issue at best imo, but to each is own. I do agree pwbg is a great rom aswell.
After constantly bouncing around ROMs, this is honestly the best setup I have had thus far: PWGB ROM with the Adrenaline Shot, fixpermissions.zip, EC09 radio, and the GeeWiz 2.1 kernel (very basic kernel, flashed to remove hotspot monitoring). I have tried the custom kernels but they remove a lot of stability for me. Also check out the sweet honeycomb theme for it!
do i just odin the eho9 radio? i have ed04 and i have trouble with having 3g or any signal for that matter. would eh09 be better? will it work with cm7, miui, or powerwsahed?
Yes Odin the ec09 modem...much better than ed04 IMO. Getting 1.3mb down on speakeasy.
I'm still running EC01, even with PWGB. Never had a data/call problem, ever.
I use my speakerphone a lot, so for me it is a deal breaker, it's a great Rom nonetheless
For powerwashed i restored back to original since i had to use the pit file to repatriation, think is great so far.
Sent from my SCH-I500 using XDA App
And here is why you have to try all the roms yourself. i was on powerwashed GB rom and i hated it. Very glitchy and the touchscreen would freeze. Tried everything to try and cure it, adrenaline shot, turning off the 100mhz setting. To make matters worse something in that rom borked my connection to a PC, I couldnt get it to recognize my phone. I tried for 3 days finally got a connection and i dumped that pile. CM7.1 and been pretty good so far tho all roms have glitches you just have to try out what works best for you.
BTW best data connection I ever got was on the EB01 radio, I was getting 1.5 meg down. EC09 was horrible I got around 200k down. I'm on ED05 now will see how it does.
Im set up on powerwashed now and my screen freezes and im constantly takeing screenshots. I think im gonna give espresso a try. Thanks to everyone whos giveing their two cents on this. Greatly appreciated but I guess its trial and error. I do like to see everbodys feedback tho.
Sent from my SCH-I500 using XDA App
Well what I have seen here lately is that their are multiple ways to root. But on top of that all the roms have different glitches. So I'm still stuck with debating and fixing my phone constantly. I'm running an old miui and can't really see a way to try the new 1.10.14.
Sent from my SCH-I500 using XDA App
once the glitch kernel implements Jt's GPS fix, cm7.1 and glitch will be the best and fastest! It's the most overclock and also You can under-volt more than another kernel.
exzacklyright said:
once the glitch kernel implements Jt's GPS fix, cm7.1 and glitch will be the best and fastest! It's the most overclock and also You can under-volt more than another kernel.
Click to expand...
Click to collapse
Glitch already is imo... I just use gps booster from market until the fix is implemented. Getting the same gps results as jt's kernal this way.
Okay, this is potentially a really stupid question...but here goes.
I'd installed CM7.1 on my Fascinate as soon as I got it (was running a Vibrant with CM7) and immediately started seeing the weird issues like:
-data connection disappearing
-"double ring"...ringer ringing away during a call, requiring an end and re-dial to have a clean conversation
-call volume being ear-piercingly loud
As a result, I've started ROM hopping. However, the ROMs I've tried all seem to have the same issues.
Not trying to flame anyone, or bag on any of the ROM authors/maintainers, but are all the Fascinate ROMs out there a copy/modification of the CM ROM? Or are these issues I'm seeing (as others are too) a common failing of anything other than the stock ROM that came on the phone?
im running cm7.1 and have none of those issues.
What modem do you have? The ringing you are experiencing is called the phantom ring. I thought it was a known issue in all mtd roms, but I haven't used one in awhile. I remember having the call volume the same way. You have to press vol down once.
Sent from my SCH-I500 using XDA App
droidstyle said:
im running cm7.1 and have none of those issues.
Click to expand...
Click to collapse
I was running pool party and loved it except the WiFi kept dropping. I need a reliable network connection. I would have continued using it if not for that. TSM resurrection has been my more stable second choice.
Sent from my SCH-I500 using xda premium
uzumaki82 said:
What modem do you have?
Click to expand...
Click to collapse
I flashed Evil Fascinate over the weekend and I'm running DL09.
However, this doesn't answer the deeper question as to if the issues I saw in CM7.1 are pervasive in the other ROMs for this phone, as I've already experienced them in Evil, and it's been three days in use.
I'm not sure if I should simply accept the issues and find a ROM that I like, or if there's a different ROM out there that doesn't have the CM7.1 issues.
I am having the issues with the volume but, pressing volume up or down works to clear that up. I have also gotten complaints of the other end having an echo. This is on all calls with multiple carriers from other people. Anyone having this issue as well and know how it can be resolved? It doesn't echo on my end. Just the person I am talking too. Also I am running modem Baseband EDO5. I was running EBO1 and still have the same issues with each. I have tried MIUI as well and still the same. I flashed to stock fascinate as if you were to get it from Verizon and all of that seemed to go away. When I flashed back to CM 7.1 all of these issues arose again.
thedoman said:
I was running pool party and loved it except the WiFi kept dropping. I need a reliable network connection. I would have continued using it if not for that. TSM resurrection has been my more stable second choice.
Sent from my SCH-I500 using xda premium
Click to expand...
Click to collapse
my wifi never drops...sometimes I have to toggle it off/on after a reboot but thats it.
I have had that problem on all my android devices that I have had. Sometimes hardware just freezes up and you have to do a reboot. They are basically little computers anyway but, if you are constantly having to reboot to get something to work. It is more than likely a problem with the mod.
Finally got cm7.1 stable working consistently on my phone. Data hand off between 3g and wifi seems to be a standard problem around here and for the most part the answer seems to be just to deal with it.
It's been a few months since the stable was released, so I'm wondering if anyone has found a work around. Is there a tasker program or something in the nightlies that addresses this?
Also I've been getting frequent bootloops when cm crashes and forces reboot such as the constant vibration using navigation and switching between camera/camcorder. Eventually the whole thing crashes and bootloops forcing me to restore. Are these common as well?
On stable w/ glitch v13 oc 1.4Ghz -100mv EC09 Thanks
alphax_0 said:
Finally got cm7.1 stable working consistently on my phone. Data hand off between 3g and wifi seems to be a standard problem around here and for the most part the answer seems to be just to deal with it.
It's been a few months since the stable was released, so I'm wondering if anyone has found a work around. Is there a tasker program or something in the nightlies that addresses this?
Also I've been getting frequent bootloops when cm crashes and forces reboot such as the constant vibration using navigation and switching between camera/camcorder. Eventually the whole thing crashes and bootloops forcing me to restore. Are these common as well?
On stable w/ glitch v13 oc 1.4Ghz -100mv EC09 Thanks
Click to expand...
Click to collapse
no I'm not experiencing those issues. there is no fix for data hand off issue yet. just leave either data on or wifi, not both.
droidstyle said:
no I'm not experiencing those issues. there is no fix for data hand off issue yet. just leave either data on or wifi, not both.
Click to expand...
Click to collapse
I see a few commits on JT's githhub that say they semi fix it...also I haven't experienced the problem really at all aside from rebooting with wifi on since I came back to MTD Roms.
I see. It's just sometimes my 3g/wifi will be colored and still won't be receiving signal every so often even when I disable the other data method. Oh well
sendan said:
I see a few commits on JT's githhub that say they semi fix it...also I haven't experienced the problem really at all aside from rebooting with wifi on since I came back to MTD Roms.
Click to expand...
Click to collapse
same here...but quite a few report the same issue as op. I seen a post where chopper said to only leave one on or the other. just passing the info along.
Hmmm, it may have to do with the radio. I've seen a few people mention that the handoff is better with the eh03 radio; coincidentally that's what I've been using since I came back to MTD.
Sent from my SCH-I500 using xda premium
Been on SnowJB for a day or two now. Everything is completely fantastic save one exception. I can't get my brightness over 63%. I came from Houstonn's JB v1 and didn't have thus issue due to his thermald mod. I tried flashing that on Snow but its still stuck. Anyone have any suggestions?
Sent from my LG-E970 using xda premium
Katamo Jones said:
Been on SnowJB for a day or two now. Everything is completely fantastic save one exception. I can't get my brightness over 63%. I came from Houstonn's JB v1 and didn't have thus issue due to his thermald mod. I tried flashing that on Snow but its still stuck. Anyone have any suggestions?
Sent from my LG-E970 using xda premium
Click to expand...
Click to collapse
Have you made wipe before installing it? I don't have such problem with Brighness on SnowJB, but my phone unpredictably power-offs...Don't know the reason yet.
romrak said:
Have you made wipe before installing it? I don't have such problem with Brighness on SnowJB, but my phone unpredictably power-offs...Don't know the reason yet.
Click to expand...
Click to collapse
I've tried clean and dirty (ROM and Mod together and separately) with no luck. On the other hand, it's such a small issue compared to the other problems I've read in the SnowJB thread like the behavior you mentioned with yours. I just don't know what I did any differently than anyone else who knows what they're doing in this realm. That been said, I haven't given up yet. I'm sure it can be resolved somehow.
I came from houston's with clean installed and everything was good, the same with snowsJB. No problems whatsoever. I did read about others having your brightness issue on houston's version and I believe someone created a fix for it somewhere in that thread. So take a look there.
stylin350 said:
I came from houston's with clean installed and everything was good, the same with snowsJB. No problems whatsoever. I did read about others having your brightness issue on houston's version and I believe someone created a fix for it somewhere in that thread. So take a look there.
Click to expand...
Click to collapse
Thank was the first place I went to since I also came from Houstonns JB v1
I am on SnowJB v1.1.
I have a slightly different problem with brightness. If I put it on "Auto", it never adjust. Always stuck at what ever level it was when I put it in Auto.
Got it working. isolated the issue to a conflict with AdriVelazquez's thermalconfig mods. maybe they work for other people our on a different Rom but the modified stock and the full power configurations both crippled my brightness adjustment capabilities. If someone can verify we can mark this thread as resolved