Related
I was on Miui rom, but I wanted to go and try Simpley Honey, so I went to CWM and wiped everything like it said, and I accidently formated the boot too. Is this why I'm stuck at the screen? i tried everything` Odin,Heimdall,Aio toolbox and all drivers for vibrant,but pc dont recognize my phone and there are only show <unknown device>
PLEASEEEEEE HELP TO FIX MY VIBRANT
Couple of things to try.
First, if you want to Odin, then I usggest going into your device manager on your PC and uninstalling your drivers. Then reinstall them manually of with the Toolbox.
Second, (Rule #1-Always make a back up)- Hopefully you made a nandroid back up of your MIUI that you were on. If so, you should be able to restore that and then wipe properly.
Third, if you can get into Recovery and you don't have a back up, then try to flash a ROM (2.3.x or higher since you were on MIUI) and see if that gets you back up and running.
Pretty sure that if you wiped Boot.img your phone is still recoverable. It isn't like you wiped out the bootloader or anything. Those are not touchable from CWR, so don't fret that part.
i uninstalled all drivers then installed again but odin dont recognize my phone(unknown device) in download mode,and i can not acces to CWM(((
do uninstall those drivers again and just download and install samsung kies mini it will automatically recognize and install drivers for you.. hope this will help you...JFD by odin will be the best way after that...
NB:for future reference---
always remember two things before flashing any rom...
** do nandroid backup
** get back to stock by odin then proceed any rom you want...
Haha, I did this before (about 2 weeks ago). I just placed it in download mode, then flashed back to stock using ODIN.
I tried everything but pc dont recognize my vibrant(((
dont freak out man, like everybody has said you did not brick your phone. when you click format boot, you only wipe the boot media (the startup image/video). you're boot-loaders are still in tact. this is all about getting your pc to recognize your phone. try to connect on another computer and try different variations of connecting to the computers, try a different usb port. Once I thought I bricked my vibrant as in I couldn't get into download mode or anything. I stupidly unplugged it while it was installing factory.rfs on odin, I thought it was stuck. Nothing would come up with any button combo pressed. then nine hours later and a change of usb ports, I got it into download mode an odined to stock.
but ive already tried it in many computers and usb ports,but still no success(((
I rooted my device with superoneclick, got the 3e recovery, then got the CWM recovery for galaxyS i9000 through ROM manager(working fine), and then rebooted into recovery and flashed carbonROM for 4.2.2 (the .zip file), along with Gapps for 4.2.2. Now it's stuck at the samsung screen, I can't boot into recovery, taking out the battery doesn't help, and the power button is NOT jammed. I can't restore the backup that I made because I can't go into recovery and my computer is not detecting the device (with all the proper drivers installed). I don't know what to do. Does anybody know how to resolve this issue?
I don't care about the user data (including contacts, messages, etc) that much, if it needs to be wiped. I only want my phone back, with or without the ROM.
SirKurry said:
I rooted my device with superoneclick, got the 3e recovery, then got the CWM recovery for galaxyS i9000 through ROM manager(working fine), and then rebooted into recovery and flashed carbonROM for 4.2.2 (the .zip file), along with Gapps for 4.2.2. Now it's stuck at the samsung screen, I can't boot into recovery, taking out the battery doesn't help, and the power button is NOT jammed. I can't restore the backup that I made because I can't go into recovery and my computer is not detecting the device (with all the proper drivers installed). I don't know what to do. Does anybody know how to resolve this issue?
I don't care about the user data (including contacts, messages, etc) that much, if it needs to be wiped. I only want my phone back, with or without the ROM.
Click to expand...
Click to collapse
Are you still able to get into Download mode? If so then you can use Odin to re-flash the stock factory ROM that came with your phone. I would recommend taking a look at this guide here as well as this video guide here.
shimp208 said:
Are you still able to get into Download mode? If so then you can use Odin to re-flash the stock factory ROM that came with your phone. I would recommend taking a look at this guide here as well as this video guide here.
Click to expand...
Click to collapse
the .zip file in the first link is "unavailable in [my] geographical area. I can't use the youtube guide because i can't get into download mode. After not having touched it in several hours, I think the battery ran out, and if I plug it back in, it shows a loading icon that's stuck.
EDIT: I got it to get into download mode, but Odin won't detect it with the COM## thing. I can add the infuse.pit and the PDA md5 thing, but when I start it, it doesn't do anything.
SirKurry said:
the .zip file in the first link is "unavailable in [my] geographical area. I can't use the youtube guide because i can't get into download mode. After not having touched it in several hours, I think the battery ran out, and if I plug it back in, it shows a loading icon that's stuck.
EDIT: I got it to get into download mode, but Odin won't detect it with the COM## thing. I can add the infuse.pit and the PDA md5 thing, but when I start it, it doesn't do anything.
Click to expand...
Click to collapse
Make sure you have the USB drivers for your phone installed, you can download the drivers for your phone from here. Also before you flash anything to your phone it is essential that is has enough battery charge (70%+ to be on the safe side).
Thanks for all the help! I finally got it to detect my device in Odin. Turns out my drivers weren't working properly, so I re-installed them. It's in the process of reverting to stock now. You are a lifesaver!
help
SirKurry said:
the .zip file in the first link is "unavailable in [my] geographical area. I can't use the youtube guide because i can't get into download mode. After not having touched it in several hours, I think the battery ran out, and if I plug it back in, it shows a loading icon that's stuck.
EDIT: I got it to get into download mode, but Odin won't detect it with the COM## thing. I can add the infuse.pit and the PDA md5 thing, but when I start it, it doesn't do anything.
Click to expand...
Click to collapse
can you please tell me how you got it to go into odin. I am stuck at the very same spot.
I know there has been other treads about this before but none of the suggestions seemed to work for me. I searched and searched and I'm just not finding a fix. I hate to do these posts when an easy answer is right there but I just can't figure it out and it's killing me. So here it is:
I just got this Verizon Galaxy Tab that would not come on - only showed the battery charging icon. I just charged it over night and it came on once. However, processes kept shutting down. For instance, when I went into settings and tried to connect to my wifi network, the whole process would just close down. So I let it get to about 40% and reboot it to download mode (there was no recovery). I found the correct .tar file for it and flashed it with ODIN3 v1.85. It completed successfully but now it won't boot past the Samsung splash screen. Once the splash screen comes up, it will just go back to the large battery charging icon in the middle of the screen.
Then I tried the other option where you get into recovery and nothing happens at all. The screen is backlit black (you can just see light around the edges of the screen) and nothing ever happens.
So now, it's just charging but it seems to charge very slowly. I was wondering if this is a battery issue or some strange sequence that needs to be done. It seems to be at about 40% again. Any other suggestions would be appreciated.
These are other things I've tried:
hold the power button down for 30 seconds
Hold the power button down while touching the screen
More suggestions would be appreciated.
Now the tablet is fully charged but it still gets stuck on the splash screen when trying to boot up. Still have no recovery. Also, I'm not able to find a PIT file to re-partition. Can someone tell me how to get the stock recovery back at least? I've been looking but I can't find a file to flash for the recovery.
Same problem
Hi, I have the same issue basically. I have the Galaxy Tab SGH i957D 8.9 (TELUS) and flashed it to root last night, now I have the same problem. Except I have CWM installed, I was able to install that AFTER I locked it up. Help from one of the GURUs here would be great. It's obviously a problem caused by flashing it.
So try flashing with CWM, at least you'll have a good recovery on it. If we work together, we may be able to come up with a solution for our dilemma. I don't believe it;s a major problem, I had the same issue with my captivate phone when trying to CWM and Cyanogenmod, and I got it working perfectly, so there is hope.
I have tried the stock rom, rooted rom, and a couple of others, but still can;t get past the splash screens. Left it overnight trying to boot, and all it did was kill the battery. I can;t even turn it off, it just reboots every time I try shutting down. I CAN get to download and recovery mode though, and flash it all I want with Odin 3.7 and 1.83, just never boots past the splash screens.
DermagraFX said:
Hi, I have the same issue basically. I have the Galaxy Tab SGH i957D 8.9 (TELUS) and flashed it to root last night, now I have the same problem. Except I have CWM installed, I was able to install that AFTER I locked it up. Help from one of the GURUs here would be great. It's obviously a problem caused by flashing it.
So try flashing with CWM, at least you'll have a good recovery on it. If we work together, we may be able to come up with a solution for our dilemma. I don't believe it;s a major problem, I had the same issue with my captivate phone when trying to CWM and Cyanogenmod, and I got it working perfectly, so there is hope.
I have tried the stock rom, rooted rom, and a couple of others, but still can;t get past the splash screens. Left it overnight trying to boot, and all it did was kill the battery. I can;t even turn it off, it just reboots every time I try shutting down. I CAN get to download and recovery mode though, and flash it all I want with Odin 3.7 and 1.83, just never boots past the splash screens.
Click to expand...
Click to collapse
Thanx for the reply. As you can see, I've been around these forums for a long time and usually I'm able to work it out but this one has got me stumped. Just wanted to ask you if you have tried to flash a custom ROM in Clockwork? Also, did you go through unlocking the boot loader befor you flashed it? I did not because I received the tablet in this condition. I tried to flash clockwork mod but I get an "invalid file" error in Odin. Once I flashed the stock recovery and it worked fine. But after reflashing the stock rom, the stock recovery is gone now. Do you have a link to the files you used? I'm thinking that the stock recovery is messed up but I can only find that one file.
no I haven't tried flashing through CWM, as I wasn't trying to flash originally, I was just rooting and going easy on it, then it wouldn't boot, so I wasn't prepared and now can't add files to my SD drive.
I didn't unlock the boot, as none of the instructions I read mentioned it (rooting was all I was trying to do).
I don't even have a stock recovery either, all I have is CWM and TWRP.
I'm going to try mounting it in Linux and see if that makes any difference to put roms on my SD drive, as windows doesn't like it anymore, except through Odin, where luckily it seems to work fine... For now.. lol
Fixed!!!
shawndh said:
Thanx for the reply. As you can see, I've been around these forums for a long time and usually I'm able to work it out but this one has got me stumped. Just wanted to ask you if you have tried to flash a custom ROM in Clockwork? Also, did you go through unlocking the boot loader befor you flashed it? I did not because I received the tablet in this condition. I tried to flash clockwork mod but I get an "invalid file" error in Odin. Once I flashed the stock recovery and it worked fine. But after reflashing the stock rom, the stock recovery is gone now. Do you have a link to the files you used? I'm thinking that the stock recovery is messed up but I can only find that one file.
Click to expand...
Click to collapse
ok.. I have mine fixed and running again.
http://samsung-updates.com/device/?id=SGH-I957D
This is the stock flash/rom for Telus on the SGH i957D LTE 4G 8.9 model. Try samsung-updates.com and search for your exact model and carrier.
-Download correct stock image for your tablet.
-Unpack the file you downloaded
-Put your device in DOWNLOAD mode
-Connect it to Computer
-Start ODIN and wait for the COMM status to show as connected
-In PDA box navigate to your file and add it to the box.
-Press start
-Sit back and relax.
-Enjoy the fireworks as your tablet comes back to life..
-YEAH!!!
Life is good again...
DermagraFX said:
ok.. I have mine fixed and running again.
http://samsung-updates.com/device/?id=SGH-I957D
This is the stock flash/rom for Telus on the SGH i957D LTE 4G 8.9 model. Try samsung-updates.com and search for your exact model and carrier.
-Download correct stock image for your tablet.
-Unpack the file you downloaded
-Put your device in DOWNLOAD mode
-Connect it to Computer
-Start ODIN and wait for the COMM status to show as connected
-In PDA box navigate to your file and add it to the box.
-Press start
-Sit back and relax.
-Enjoy the fireworks as your tablet comes back to life..
-YEAH!!!
Life is good again...
Click to expand...
Click to collapse
I'm glad you got the right firmware and fixed your tab! But this site does not list a firmware for the SCH–i905 anywhere. Unless the Verizon Galaxy tab has an alternate model# there is no firmware on the site for my device. Oh well, at least one of us got tablets fixed. Congrats!
Download mode issue.
What recommendations do you guys have for a tablet that will not recognize in download mode?
I accidently flashed a bootloader and had auto reboot on - couldnt flash kernel and modem in time.
My tablet fully boots up, (rom manager says cwm is installed) as well as when i boot into recovery its completely black.
My main concern is that download mode is not recognized. it was previously working prior to installing the bootloader.
What can i do to fix this issue?
younggunner said:
What recommendations do you guys have for a tablet that will not recognize in download mode?
I accidently flashed a bootloader and had auto reboot on - couldnt flash kernel and modem in time.
My tablet fully boots up, (rom manager says cwm is installed) as well as when i boot into recovery its completely black.
My main concern is that download mode is not recognized. it was previously working prior to installing the bootloader.
What can i do to fix this issue?
Click to expand...
Click to collapse
Can you start by giving as much info as possible about your tab, make model# etc.
can you actually get into download mode? Power button and Volume down button till it boots then release pwr.
you may have bad drivers on your pc. I had this problem with my phone when I installed CM.
get into DL mode and then start Odin and hopefully you will see the Com port attached.
then in PDA load the stock rom for your tab.
hopefully at this point youll be all set.
if your tab is fully functional, then try just flashing CWM or TWPR to your tab. I found with mine that CWM works best. I like TWP better for looks and the touchscreen functionality, but I found it gets a bit flaky after a few flashes, where CWM seems more stable.
SHAWNDH...
give me all your info for your tab, make, model.. carrier etc. as much as you can, and I will see if I can find any stock roms while doing my searches. 2 sets of eyes are better than one...
So i have a sch-i905, 4.0.4 - I CAN boot into normal android
I flashed a bootloader last night and had auto reboot ticked. was not able to install the modem or the kernel.
I can get into download mode without any issues,but now download mode says "waiting for cable" and is not recognized by pc as it once was prior to the flash.
I can also get into recovery but its completely black ( assuming due to no kernel flashed )
I can get into android normally, but cant fix firmware through download mode, and recovery.
Please help :X
side note: rom manager says twmp and cwm is installed, though i get no display in recovery only blackness
if i can get download mode to work again or get cwm to show up i can fix it, but dont know where to go from here.
younggunner said:
So i have a sch-i905, 4.0.4 - I CAN boot into normal android
I flashed a bootloader last night and had auto reboot ticked. was not able to install the modem or the kernel.
I can get into download mode without any issues,but now download mode says "waiting for cable" and is not recognized by pc as it once was prior to the flash.
I can also get into recovery but its completely black ( assuming due to no kernel flashed )
I can get into android normally, but cant fix firmware through download mode, and recovery.
Please help :X
side note: rom manager says twmp and cwm is installed, though i get no display in recovery only blackness
if i can get download mode to work again or get cwm to show up i can fix it, but dont know where to go from here.
Click to expand...
Click to collapse
I don't get it. First, you can't flash a kernel using Odin. Second, your tab won't even be able to boot without the kernel.
Sent from my GT-P7500 using Tapatalk HD
younggunner said:
So i have a sch-i905, 4.0.4 - I CAN boot into normal android
I flashed a bootloader last night and had auto reboot ticked. was not able to install the modem or the kernel.
I can get into download mode without any issues,but now download mode says "waiting for cable" and is not recognized by pc as it once was prior to the flash.
I can also get into recovery but its completely black ( assuming due to no kernel flashed )
I can get into android normally, but cant fix firmware through download mode, and recovery.
Please help :X
side note: rom manager says twmp and cwm is installed, though i get no display in recovery only blackness
if i can get download mode to work again or get cwm to show up i can fix it, but dont know where to go from here.
Click to expand...
Click to collapse
If you can get into DL mode, then its probably just an issue of drivers on your pc. Download the samsung drivers and reinstall.
Then put your tab in dl mode. Then connect to the pc with cable, try a different usb port than before.
Then start odin, if you get the Com port showing up in the status box, then flash CWM recovery to the tab. Then start over with what you are trying to do. But I can almost garantee its an issue with drivers on your pc. I had the exact same problem with my phone when I did it,
and fixing drivers was the issue. I wss stumped for a long time on that issue. If that doesnt work, look into Heimdall flash utility or Kies and go from there.
Hope this helps. Or at least gets you on the right track.
update
DermagraFX said:
If you can get into DL mode, then its probably just an issue of drivers on your pc. Download the samsung drivers and reinstall.
Then put your tab in dl mode. Then connect to the pc with cable, try a different usb port than before.
Then start odin, if you get the Com port showing up in the status box, then flash CWM recovery to the tab. Then start over with what you are trying to do. But I can almost garantee its an issue with drivers on your pc. I had the exact same problem with my phone when I did it,
and fixing drivers was the issue. I wss stumped for a long time on that issue. If that doesnt work, look into Heimdall flash utility or Kies and go from there.
Hope this helps. Or at least gets you on the right track.
Click to expand...
Click to collapse
dont think its a driver issue.
it was working fine in download mode prior to me flashing a bootloader.bin, and yes you can flash a kernel.bin through odin, as well as a modem.bin.
I was in the process of installing cwm this way when it happened.
I can get into the os, i can get adb working fine, recovery is just a black screen though it goes into it. and i can get into download mode still, just stuck at "waiting for cable" no interaction with device manager
---------- Post added at 12:24 AM ---------- Previous post was at 12:22 AM ----------
younggunner said:
dont think its a driver issue.
it was working fine in download mode prior to me flashing a bootloader.bin, and yes you can flash a kernel.bin through odin, as well as a modem.bin.
I was in the process of installing cwm this way when it happened.
I can get into the os, i can get adb working fine, recovery is just a black screen though it goes into it. and i can get into download mode still, just stuck at "waiting for cable" no interaction with device manager
Click to expand...
Click to collapse
Ive tried another pc as well. I dont believe its a driver issue as there is 0 interaction in download mode with device manager. but prior it easily was detected in odin no issues.
younggunner said:
dont think its a driver issue.
it was working fine in download mode prior to me flashing a bootloader.bin, and yes you can flash a kernel.bin through odin, as well as a modem.bin.
I was in the process of installing cwm this way when it happened.
I can get into the os, i can get adb working fine, recovery is just a black screen though it goes into it. and i can get into download mode still, just stuck at "waiting for cable" no interaction with device manager
---------- Post added at 12:24 AM ---------- Previous post was at 12:22 AM ----------
Ive tried another pc as well. I dont believe its a driver issue as there is 0 interaction in download mode with device manager. but prior it easily was detected in odin no issues.
Click to expand...
Click to collapse
Ok... Im getting confused here... You Can still flash with Odin? Then you can install a new recovery on it. If device manager on the pc is not working, then you probably have a corrupt install, or the wrong rom file for your particular tab, and the usb drivers arent correct for your tablet.
Personally, I would start by downloading a stock rom file and return the tab to factory before starting anything, so you have it working as it should before continuing further.
If you DO HAVE a stock rom, maybe you could pass it along, i believe shawndh who started this thread is in need of one for the same tablet.
confusion fixed
DermagraFX said:
Ok... Im getting confused here... You Can still flash with Odin? Then you can install a new recovery on it. If device manager on the pc is not working, then you probably have a corrupt install, or the wrong rom file for your particular tab, and the usb drivers arent correct for your tablet.
Personally, I would start by downloading a stock rom file and return the tab to factory before starting anything, so you have it working as it should before continuing further.
Click to expand...
Click to collapse
I cannot currently get download mode to recognize anything. just keeps saying "waiting for cable" thats why i cant do anything in download mode. It was currently working prior to flashing the bootloader through odin with the "auto reboot" accidentally clicked.
younggunner said:
I cannot currently get download mode to recognize anything. just keeps saying "waiting for cable" thats why i cant do anything in download mode. It was currently working prior to flashing the bootloader through odin with the "auto reboot" accidentally clicked.
Click to expand...
Click to collapse
Oh... Well then it is beyond the scope of any problem I have encountered, or seen a solution to. I thought you could still connect in download mode.
Can you change usb debugging mode in tablet settings, that may enable you to connect? If not I dont think I personally can help, as your posts read like you could still use Odin.
On my phone, (galaxy S) nothing would connect after I messed up, but could do things with Heimdalls utility. See if you can connect with that. Worth a try, it does the same as Odin, but connects differently somehow.
DermagraFX said:
Oh... Well then it is beyond the scope of any problem I have encountered, or seen a solution to. I thought you could still connect in download mode.
Can you change usb debugging mode in tablet settings, that may enable you to connect? If not I dont think I personally can help, as your posts read like you could still use Odin.
On my phone, (galaxy S) nothing would connect after I messed up, but could do things with Heimdalls utility. See if you can connect with that. Worth a try, it does the same as Odin, but connects differently somehow.
Click to expand...
Click to collapse
i even went as far as getting a brand new cable to see if it was my cable still same thing. No response in download mode for either pc's ive tried.
little stumped....
possible clues: when tablet boots up, it boots up to a bright black screen, only once it completely boots up am i able to see my display properly.
DermagraFX said:
Can you start by giving as much info as possible about your tab, make model# etc.
can you actually get into download mode? Power button and Volume down button till it boots then release pwr.
you may have bad drivers on your pc. I had this problem with my phone when I installed CM.
get into DL mode and then start Odin and hopefully you will see the Com port attached.
then in PDA load the stock rom for your tab.
hopefully at this point youll be all set.
if your tab is fully functional, then try just flashing CWM or TWPR to your tab. I found with mine that CWM works best. I like TWP better for looks and the touchscreen functionality, but I found it gets a bit flaky after a few flashes, where CWM seems more stable.
SHAWNDH...
give me all your info for your tab, make, model.. carrier etc. as much as you can, and I will see if I can find any stock roms while doing my searches. 2 sets of eyes are better than one...
Click to expand...
Click to collapse
Thanx for the reply. I have the SCH-i905 32gb Galaxy 10.1 tab. The carrier is Verizon. I've spent days looking for another download source but I can only find one - there's a link from this site. Others have posted that it did restore their devices so I'm thinking that there are some bad clusters that need to be quarantined but I can't even find a tool for the Galaxy Tab that will do or check for that. I'd appreciate it if you could take a look though. Thanx.
younggunner said:
I cannot currently get download mode to recognize anything. just keeps saying "waiting for cable" thats why i cant do anything in download mode. It was currently working prior to flashing the bootloader through odin with the "auto reboot" accidentally clicked.
Click to expand...
Click to collapse
Are you connecting to a USB port that is on the motherboard of your computer? Mine will only recognize my tablet with one port. The other ports are not recognized at all by ODIN.
shawndh said:
Thanx for the reply. I have the SCH-i905 32gb Galaxy 10.1 tab. The carrier is Verizon. I've spent days looking another download source but I can only find one - there's a link from this site. Others have posted that it did restore their devices so I'm thinking that there are some bad clusters that need to be quarantined but I can't even find a tool for the Galaxy Tab that will do or check for that. I'd appreciate it if you could take a look though. Thanx.
Click to expand...
Click to collapse
I don't think its a cluster issue, just a bad flash previously. But you'll see from the link, yours is also known as the P4vzw. Well check the link and make sure that's your tab that I found. Then have a look at ALL the files for that tab.
Have you seen/tried this one... here's the thread STOCK ROM FOR YOUR TAB...
forum.xda-developers.com/showthread.php?t=1342995
Here's just the file.
http://goo.gl/XPMXv
Try flashing CWM recovery to your tab, and try a file from cyanogenmod
http://wiki.cyanogenmod.org/w/P4vzw_Info
Or just try the CM ROM first maybe and see what happens. I don't remember what you have for recovery. There are a bunch on there, but all nightly that I saw, but even that would be better than nothing for now if it works.
I'm still looking, but I know what you're saying about few and far between. I think they all are for the tabs. Let you know if I find anything else.
Another mod ROM. http://www.teamandroid.com/2012/08/...tab-101-sch-i905-android-411-aosp-jelly-bean/
So i recently tried to flash my phone to cynagenmod and i was intensely close to doing so until i noticed what i did wrong.
But then when i rebooted my phone after using clockwork, my phone would not boot up after the start screen.
I am able to use recovery mode and download mode but i cannot go anywhere beyond that.
I also tried restarting it with Odin but it wont recognize the device even though the proper drivers have been installed.
I have tried unplugging it in different usb slots and ive reinstalled Odin.
Is there anyone that could possibly help?
Just get back to recovery and flash the rom, many times if coming from a different version (2.2-->4.2) it requires more than 1 flash
Nexus⁴ PAC 360° Productions
Try this: http://forum.xda-developers.com/showthread.php?p=44794712
And 2 posts down I explain what I did
Hello all,
I've encountered a problem with my Straight Talk Galaxy S II S959G after flashing the CWM from this thread:
http://forum.xda-developers.com/showthread.php?t=2559694
I was running 6.0.1.2 or something along those lines. And I was running the 4.2.2 SuperNexus ROM. I can only get to the Samsung Galaxy S II screen and then it goes blank, but does not shut off, as my computer recognizes as being on. However, I cannot DO anything with it even though it can be connected to my computer. Odin v1.85 does not seem to recognize it either.
If someone could help, it would be much appreciated.
It sounds like you just have a soft brick if you're still getting the Samsung logo.
ODIN is intended to be used in download mode. Are you able to get into download mode (hold vol +/vol -, then plug in the USB cable)? If so, you should be able to reflash the kernel, assuming that's what broke. I like to keep an ODIN flashable full stock ROM (minus bootloaders) handy in the event that I mess things up badly.
I don't have experience with the specific ROM you are trying to flash (I was actually planning on playing around with that one soon).
jpasher said:
It sounds like you just have a soft brick if you're still getting the Samsung logo.
ODIN is intended to be used in download mode. Are you able to get into download mode (hold vol +/vol -, then plug in the USB cable)? If so, you should be able to reflash the kernel, assuming that's what broke. I like to keep an ODIN flashable full stock ROM (minus bootloaders) handy in the event that I mess things up badly.
I don't have experience with the specific ROM you are trying to flash (I was actually planning on playing around with that one soon).
Click to expand...
Click to collapse
I'm not very experienced with all of this, but, I have tried Odin mode. My computer does not recognize my phone when it is plugged in.
I do have the stock rom that my phone came with too, but I do not have a Samsung official USB cable to use with it, which, supposedly, is required for this to work. And I do not know if my Odin version on my computer is outdated either.
Epications said:
I'm not very experienced with all of this, but, I have tried Odin mode. My computer does not recognize my phone when it is plugged in.
I do have the stock rom that my phone came with too, but I do not have a Samsung official USB cable to use with it, which, supposedly, is required for this to work. And I do not know if my Odin version on my computer is outdated either.
Click to expand...
Click to collapse
Many usb cables will work just fine. The original cables are known to be of good quality. Odin3 v1.85 is recommended for this phone, although any version of Odin should work.
Did you open Odin on the desktop before putting the phone into download mode? Sometimes the problem is as simple as wrong sequence.
If you have a USB jig, use that to put the phone into download mode. Then connect it to the computer while Odin is open on the desktop.
Make sure you have the correct driver installed. You should have "SAMSUNG USB driver for mobile phones" in your add/remove programs dialog in windows. If not, install it. If so, uninstall it, reboot, reinstall it.
Try different cables, different usb ports, even different pc's.
I'll try not to butt in too much, since creepyncrawly obviously has a lot of experience.
(at this point, I'm assuming you're on Windows)
Like he said, it's sounds like it's most likely a driver issue. When you first plugged in the phone, did you get a Windows balloon notification saying "Installing drivers"? If you open up device manager, do you have any devices with an exclamation point next to them, indicate a device that failed to start? If so, make sure the Samsung drivers are installed.
A USB jig is definitely nice to have handy. I use this one (as long as you can wait a few weeks on shipping). If you can get into download mode, your bootloaders are probably safe (meaning you should be able to recover easily).
I actually installed that CM11 ROM yesterday on my SGH-I777 (I can't say anything specific about your model and how it may differ, but it seems to basically be the same phone as the I777). I was running stock non-rooted JB 4.1 with stock recovery, so I had to take a little more of a convoluted route to get there.
In the end, here's the thread for you. Once you can get ODIN download mode working again, you should be well on your way to fixing it (flash CWM 6.0.4.5 from ODIN, boot into recovery, then try the ROM install again).
Well, I've tried flashing CWM again using Odin. While I actually can USE Odin this time, it just isn't working... My phone still only turns on and goes blank after the Galaxy S II screen.
I had something similar happen the other night when I flashed a kernel that was apparently incompatible with my Captivate (although it should have been fine). The phone would get stuck on the Galaxy S boot screen. I had to reflash a known good kernel to get it working again.
If you can get into the recovery, you can try a wipe/factory reset + wipe cache.
Is ODIN detecting the phone but just failing to flash the files? What error is it getting?
If ODIN is flashing the files properly, but still preventing full boot up, it's probably easiest at this point to flash back to a stock ROM. The previous thread link has the instructions and flash files (I personally have an S2, not an S959G, so it's a slightly different process).
Hi - I don't know if it is a completely outdated method, but this worked on my father's SII skyrocket yesterday when I was encountering a similar softbrick issue:
Get zadig (http://zadig.akeo.ie/), start zadig, get the phone in download mode, hit Options -> List All Devices, select the Samsung or similar device from the dropdown and replace the default USB driver.
Then use heimdall (http://forum.xda-developers.com/showthread.php?t=755265) to flash in a replacement recovery.
Double check that your phone is detected in download mode: heimdall detect
Then flash the recovery: heimdall flash --RECOVERY recovery.img (try CWM for your phone version)
(some places will have you add --no-reboot. that didn't work for me. let it auto reboot)
After it powers down, quickly disconnect the USB cable and put your fingers on the +/- buttons to get into recovery mode. From there push over whichever ROM via adb, etc. etc.
jpasher said:
I had something similar happen the other night when I flashed a kernel that was apparently incompatible with my Captivate (although it should have been fine). The phone would get stuck on the Galaxy S boot screen. I had to reflash a known good kernel to get it working again.
If you can get into the recovery, you can try a wipe/factory reset + wipe cache.
Is ODIN detecting the phone but just failing to flash the files? What error is it getting?
If ODIN is flashing the files properly, but still preventing full boot up, it's probably easiest at this point to flash back to a stock ROM. The previous thread link has the instructions and flash files (I personally have an S2, not an S959G, so it's a slightly different process).
Click to expand...
Click to collapse
It says Odin is successful, but still nothing happens. And I cannot get into recovery no matter how many times I try.
It seems flashing the stock ROM with Odin has worked now, but, now my phone has the tracfone start up animation just looping over and over.
Epications said:
It seems flashing the stock ROM with Odin has worked now, but, now my phone has the tracfone start up animation just looping over and over.
Click to expand...
Click to collapse
Boot into recovery and wipe caches; sometimes you have to do an extra wipe to get out of this type of bootloop.
SteveMurphy said:
Boot into recovery and wipe caches; sometimes you have to do an extra wipe to get out of this type of bootloop.
Click to expand...
Click to collapse
I'm having difficulties booting into recovery.
Epications said:
I'm having difficulties booting into recovery.
Click to expand...
Click to collapse
If you have the stock boot animation you should have recovery. Take the battery out, then put it back in and hold power+volume +/- until you get recovery. I have sometimes had to do this extra step after restoring stock.
Make sure your phone isn't plugged in while you're trying this, btw.
grand quattro CWM TRAPPED
Epications said:
Hello all,
I've encountered a problem with my Straight Talk Galaxy S II S959G after flashing the CWM from this thread:
http://forum.xda-developers.com/showthread.php?t=2559694
I was running 6.0.1.2 or something along those lines. And I was running the 4.2.2 SuperNexus ROM. I can only get to the Samsung Galaxy S II screen and then it goes blank, but does not shut off, as my computer recognizes as being on. However, I cannot DO anything with it even though it can be connected to my computer. Odin v1.85 does not seem to recognize it either.
If someone could help, it would be much appreciated.
Click to expand...
Click to collapse
HI BROOOO I M A GRAND QUATTRO USER EVERYTIME I SWITCH ON MY CELL MY CELL DIRECTLY GOES IN CWM MOD M WORRIED ALOT HELPPPPPPPPPPP ME