I am going to try to keep this thread updated as much as possible. PM me if something needs to be updated or changed.
Roms
GB
(2.3.5 Kernel) Eclipse v2.1
(2.3.5 Kernel) Gingerbread Phone 7 v0.5
(2.3.5 Kernel) Leaked OTA Update
(2.3.4 Kernel) Droid X2 build.prop Mash-up v5b
(2.3.4 Kernel) MIUI4DX2 Beta 1
(2.3.4 Kernel) CyanogenMod 7.2.0-RC0 X2
(2.3.4 Kernel) iBlur v2.0
(2.3.4 Kernel) Naked
(2.3.4 Kernel) Moto-Ginger-Funk v0.8d
(2.3.4 Kernel) Stock 2.3.4 DeoDexed
(2.3.4 Kernel) Molten v2.2
(2.3.4 Kernel) Liberty 3
(2.3.3 Kernel) Atrix 4G Stock 2.3.4 Rom port
(2.3.3 Kernel) Alien X2 build #4
Froyo
(2.2.2 kernel)MinimalX
(2.2.2 kernel)CorteX2
(2.2.2 kernel)Affinity
Root Methods
GB
(2.3.5 only) zergRush
Maintain root through all updates
Motorola one click
Froyo
GingerBreak
SBF's
2.3.4
2.3.3
2.2.2
SBF Tutorial
RSD Lite
RSD lite
Bootstrap
Bootstrap Recovery
Mods/Scripts
3 CDMA mods
CM7DX2 WIFI and Dialer fix/mod
DX2 3G Data Speed Boost
8 Touchpoints for CM7 for DX2
Droid X2 build.prop Mash-Up v5 fixed 2.3.4 & 2.3.5
Speedy V7
Maintain root through all updates
SD-Card flip-flop
Init.d Re-hack
Init.d Hack v0.6
Speedy Gonzales v1.0
Droid X2 Mirror APK
Power Boost v2.0
-=V6 SuperCharger=-
2nd-init
Gingerbread Battery Fix v0.8
2.3.5 Pulldown Toggles + Deodex
Looks good. Hope it stays. I would suggest breaking the roms into Froyo and GB to keep easier searching. I would also add that gingerbreak is Froyo only.
Edit: also, link so it directs to the OP of the thread.
Sent from my DROID X2 using xda premium
X0dus said:
Looks good. Hope it stays. I would suggest breaking the roms into Froyo and GB to keep easier searching. I would also add that gingerbreak is Froyo only.
Sent from my DROID X2 using xda premium
Click to expand...
Click to collapse
send me a pm to remind me and i'll do that tomorrow.
Bump
Sent from my DROID X2 using xda premium
Isn't this the same thing as the sticky? Couldn't you have just sent a pm to Mr clown asking him to update it?
Sent from my DROID X2 using XDA App
EvilTim said:
Isn't this the same thing as the sticky? Couldn't you have just sent a pm to Mr clown asking him to update it?
Sent from my DROID X2 using XDA App
Click to expand...
Click to collapse
New Members Don't Read Stickies Or Go Thru Old Posts To Find Their Answers. Remember We See The Same Question One Hundred Plus Times Asked In One Thread.
MikeJ92YJ said:
New Members Don't Read Stickies Or Go Thru Old Posts To Find Their Answers. Remember We See The Same Question One Hundred Plus Times Asked In One Thread.
Click to expand...
Click to collapse
Exactly and the sticky doesn't get updated.
Sent from my DROID X2 using xda premium
I guess if they aren't updating then I get why you posted, you do need to PM them though to get anything added. We don't have a mod dedicated to x2 forum. But seriously mike, if they don't read that they won't read this either, that is a totally moot point.
Sent from my DROID X2 using XDA App
EvilTim said:
I guess if they aren't updating then I get why you posted, you do need to PM them though to get anything added. We don't have a mod dedicated to x2 forum. But seriously mike, if they don't read that they won't read this either, that is a totally moot point.
Sent from my DROID X2 using XDA App
Click to expand...
Click to collapse
Well it's good for the people that do read. Lol
Sent from my DROID X2 using xda premium
I have been slowly updating the wiki.. Why dont you c/p some of this stuff there and we can make stickies to the wiki... (lol i rhymed)
http://forum.xda-developers.com/wiki
booked said:
I am going to try to keep this thread updated as much as possible. PM me if something needs to me updated or changed.
Roms
GB
Alien X2 build #4
Moto-Ginger-Funk v0.8
Eclipse v1.1
Gingerbread Phone 7 v0.3
Stock 2.3.4 DeoDexed
Atrix 4G Stock 2.3.4 Rom port
Molten v0.8 2.3.4
Froyo
MinimalX
CorteX2
Affinity
Root Methods
GB
Motorola one click
Froyo
GingerBreak
SBF's
2.3.4
2.3.3
2.2.2
SBF Tutorial
RSD Lite
RSD lite
Bootstrap
Bootstrap Recovery
I'd like to give thanks to clabaughiii.ld for helping me dig up some of these links.
Click to expand...
Click to collapse
mastafunk said:
stickies to the wiki...
Click to expand...
Click to collapse
I had a sticky wiki once. Turned out to syphilis. I couldn't resist. I apologize.
Also I smoked some real good sticky wiki with snoop dawg and Dr Dre.
Sent from my DROID X2 using XDA App
mastafunk said:
I have been slowly updating the wiki.. Why dont you c/p some of this stuff there and we can make stickies to the wiki... (lol i rhymed)
http://forum.xda-developers.com/wiki
Click to expand...
Click to collapse
Im gonna start trying to get the wiki as up to date as possible later today.
I think it might be a good idea to show which versions of roms need to be flashed over 2.3.3 or 2.3.4
Split the GB section into two subsections?
ashclepdia said:
I think it might be a good idea to show which versions of roms need to be flashed over 2.3.3 or 2.3.4
Split the GB section into two subsections?
Click to expand...
Click to collapse
I didn't think of that. PM booked.
Sent from my DROID X2 using xda premium
Thanks for the great post. It's nice to have everything in one place (in a post that is updated more frequently than the sticky)
You might also want to include the following:
X2 SD Storage flip-flop
http://forum.xda-developers.com/showthread.php?t=1229294&highlight=flip/flop
Maybe under "Utilities", or common patches etc. as this is useful for some of the new roms that don't include it already.
http://forum.xda-developers.com/wiki/Motorola_Droid_X2#Gingerbread_2.3.3_Based_ROMs
Most of the ROM's are in there now except the new liberty.. just need to update some of the patches and root methods..
The roms are broken down by sbf they are based on in the wiki.
mastafunk said:
http://forum.xda-developers.com/wiki/Motorola_Droid_X2#Gingerbread_2.3.3_Based_ROMs
Most of the ROM's are in there now except the new liberty.. just need to update some of the patches and root methods..
The roms are broken down by sbf they are based on in the wiki.
Click to expand...
Click to collapse
Awesome, I'm waiting for Liberty to be at full release before I add it. Dont want to irritate the dev
booked said:
Awesome, I'm waiting for Liberty to be at full release before I add it. Dont want to irritate the dev
Click to expand...
Click to collapse
+1 Whatever you do, don't post a d/l link for test Liberty.
Updated to include mods and scripts for the x2.
How about we throw this into the op
its a Rc not the final
http://rootzwiki.com/showthread.php...-Time-for-the-Eagle-to-once-again-take-Flight
Related
Im not sure if I should post this here, but I will go ahead and try. Im on stock GB and was just wondering how I can apply the Eclipse rom? Like how to even root, Im a noob so I might need some help haha.
this should help http://forum.xda-developers.com/showthread.php?t=1193818
Sorry Im confused. To do so we have to go back to froyo?
Dustinsk said:
Sorry Im confused. To do so we have to go back to froyo?
Click to expand...
Click to collapse
Yep. It is apparently the only way right now.
Sent from my DROID X2 using XDA Premium App
Dang! Okay so just follow all those instructions... I know its early but of the FEW roms available, do you guys like eclipse the best??
seems like a lot of work lolol...
You do not have to go back to froyo. As a matter of speaking, it will not work if you go all the way back to froyo because you still need a gb kernel.
Never mind. I'm wrong for not reading. I didn't realize that you were on stock gb. With stock gb, yes you need to go back.
Once you are on rooted GB, you can use the bootstrap recovery to flash any of the custom roms available for GB without going back to froyo every time. The real chore is getting rooted.
Sent from my DROID X2 using XDA Premium App
Sweet so we can always switch roms! nice, dang, I wish I could have someone root my phone lol
Okay, so here is basically what you need to do.
1. sbf back to froyo
2. Go find the link to p3droid's pre-rooted gb update.
3. Install bootstrap for your phone.
4. Find your rom that's right for you.
5. Use bootstrap.
6. ???
7. Profit!
Hope this helps
Sent with pre-rooted gb, and swype 3.0 both of which are awesome and sexy.
Sent from my DROID X2 using XDA Premium App
Can I do all this on a Mac??
Ihatepullups said:
Okay, so here is basically what you need to do.
1. sbf back to froyo
2. Go find the link to p3droid's pre-rooted gb update.
3. Install bootstrap for your phone.
4. Find your rom that's right for you.
5. Use bootstrap.
6. ???
7. Profit!
Hope this helps
Sent with pre-rooted gb, and swype 3.0 both of which are awesome and sexy.
Sent from my DROID X2 using XDA Premium App
Click to expand...
Click to collapse
What do you mean by bootstrap. When I first rooted I had an app that let me boot into recovery. Is that bootstrap? If so once i updated to p3's gb I don't see that app anymore. This is probably a really lame issue, but some clarification would be greatly appreciated!
Once on p3's GB, reinstall the bootstrap recovery app, and use it to flash the eclipse rom.
Sent from my DROID X2 using XDA App
Mr_GreenJeans said:
Once on p3's GB, reinstall the bootstrap recovery app, and use it to flash the eclipse rom.
Sent from my DROID X2 using XDA App
Click to expand...
Click to collapse
What he said. reinstall the system recovery apk.
I don't know if you can do it on a mac, because I don't have one, but I'm almost positive that android sdk works on mac, so I want to day that you probably can. In addition, I wanted to post a link to a helpful thread on sbf to froyo: http://forum.xda-developers.com/showthread.php?t=1193818
UPDATED - [HOW-TO] SBF back to stock Froyo, Update to P3Droids Pre-Rooted GB Update
Sent from my DROID X2 using XDA Premium App
Hey guys. I ended up doing it on my pc however rsd lite wont find my phone...? Any suggestions? I also did the updated version where you plug in the usb to the back of the comp, so maybe its my comp blocking something? Ill try to do it on the mac
Make sure you downloaded and installed the drivers for your phone
X2RGB
Dustinsk said:
Hey guys. I ended up doing it on my pc however rsd lite wont find my phone...? Any suggestions? I also did the updated version where you plug in the usb to the back of the comp, so maybe its my comp blocking something? Ill try to do it on the mac
Click to expand...
Click to collapse
Run rsdlite as administrator maybe that will work
Sent from my DROID X2 using XDA App
Im running as owner. I think Ill try my other PC before I do anything else.
Nvmd. I made a rookie mistake. I thought that the driver had installed but instead it installed both the 32 and 64 bit which was screwing me up...Got it! Thanks K33pw1shen and Tim. Now, my next question. I know v2 of eclipse is coming out anytime now, should I wait til v2 or is it easy to dwnld v1 and upgrade to v2?
Dustinsk said:
Im running as owner. I think Ill try my other PC before I do anything else.
Nvmd. I made a rookie mistake. I thought that the driver had installed but instead it installed both the 32 and 64 bit which was screwing me up...Got it! Thanks K33pw1shen and Tim. Now, my next question. I know v2 of eclipse is coming out anytime now, should I wait til v2 or is it easy to dwnld v1 and upgrade to v2?
Click to expand...
Click to collapse
Its actually v0.2 its still very early build, though its by a good dev you may still have issues, recommend waiting for a while for later build unless you're an advanced user
Sent from my DROID X2 using XDA App
Okay. So Ill just dwld the first version.. Thanks, Ill post up help if I need some!
Hey guess for some reason I cant flash Eclipse I flashed Miui when I was on 2.3.4 and no issues can't flash Eclipse I have root correct stock 2.3.5 and correct kernel. I have BSR and it tells me it cant verify signature I have never seen that and then it aborts. I have re-downloaded the files ov and ov still same. Can someone help b/c I feel like supernoob!!
Sent from my a100 with FlexReaper or my free ''shut the hell up and stop calling about your new paid in full Milestone X2 not working''Droid X2! Thanks Moto! Shady Punks!
alidust42 said:
Hey guess for some reason I cant flash Eclipse I flashed Miui when I was on 2.3.4 and no issues can't flash Eclipse I have root correct stock 2.3.5 and correct kernel. I have BSR and it tells me it cant verify signature I have never seen that and then it aborts. I have re-downloaded the files ov and ov still same. Can someone help b/c I feel like supernoob!!
Sent from my a100 with FlexReaper or my free ''shut the hell up and stop calling about your new paid in full Milestone X2 not working''Droid X2! Thanks Moto! Shady Punks!
Click to expand...
Click to collapse
Did you sbf and take the latest OTA? The current version of the Eclipse will function only on that version of gingerbread.
yes but ill try it again just to back track my steps. I have factory reset had to sbf after Miui and before. I always sbf and wipe no matter what I do I am kind of OCD and have to start new Ill give it a go right now.
I have also tried new SD cards as well. I have been messing with dev. for a while so I know a lot about it I also read everything and more before I do anything (OCD) Been working on my A100 and its been easy and was easy flashing Miui dont know what I missed
I have the correct 2.3.5 (412) build so I dont get it
alidust42 said:
I have the correct 2.3.5 (412) build so I dont get it
Click to expand...
Click to collapse
If you are trying to flash Eclipse 2.2.1, you must be on the OTA 2.3.5 (418) build. Also, you have to root 2.3.4 and backup root using Voodoo before updating to 2.3.5.
and remove voodoo's su backup, before flashing eclipse
Sent from my DROID X2 using xda premium
Latest official is 418. Latest eclipse won't work with 412. That could be the problem.
Sent from my DROID X2 using xda premium
alidust42 said:
I have the correct 2.3.5 (412) build so I dont get it
Click to expand...
Click to collapse
That isn't the latest build. 418 is.
Sent from my Galaxy Nexus using Tapatalk 2
I'll remove voodoo but I DL Eclipse that was with the 412 file in the same thread unless I did not see It right. I tried to flash this a week ago and had to stop messing w/it I was editing band pics in PS & LR so I just now picked it up again. I DL the Blur version 412 should I kick that to the curb and DL 418? I was under the impression that the GBP7v0.5 would work with 2.3.5 412 though if so that would not flash as well
Sent from my a100 with FlexReaper or my free ''shut the hell up and stop calling about your new paid in full Milestone X2 not working''Droid X2! Thanks Moto! Shady Punks!
Correct me if I am wrong Eclipse did work with that version at one time or no? I saw Eclipse 3.0 but have not read the forum yet and I have been working on my Acer tab more. When I was on 2.3.4 I had no issues with Miui I had to sbf to 2.3.4 from OTA Leak 2.3.5 b/c I was not to fond of that rom at that time I will flash it at another time. I really dig the Eclipse Rom so if I need to start ov and it looks that way then I will have to read up on everything so I know what I am doing and not half assing it. I hate doing that.
Sent from my a100 with FlexReaper or my free ''shut the hell up and stop calling about your new paid in full Milestone X2 not working''Droid X2! Thanks Moto! Shady Punks!
I saw the 3.0 version for the Bionic and I have 418 DL now I am going to read some and flash the 418 and try Eclipse then if all is good take care of voodoo and hope it works. However I have some reading to do before hand. I am sure if it foes not go right I'll complain about it even if it is an operator error I'll still have to blame my DX2 for any errors. I think thats how it works
Sent from my a100 with FlexReaper or my free ''shut the hell up and stop calling about your new paid in full Milestone X2 not working''Droid X2! Thanks Moto! Shady Punks!
Edit: See post below.
You don't even need voodoo anymore. Just take ota and root using motofail.
Sent from my DROID X2 using xda premium
Did ya get it?
LaserChicken, those steps are incorrect!!
In order to flash eclipse 2.2.1 just do this...
-SBF to 2.3.4
-Root using Petes 1 click method
-Download VooDoo OTA Rootkeeper from play store
-Backup root & TEMP UNROOT (do not delete backup yet!!!!!!! )
-Settings>About Phone>Software Update> DOWNLOAD 2.3.5 OTA
*After downloading 2.3.5 from system settings the phone will reboot to stock recovery and install 2.3.5 kernel.*
-Reboot
-Open VooDoo, restore root
-NOW DELETE SU BACKUP FROM VOODOO
-Once you restore root & delete the backup < IMPORTANT! from voodoo you should be able to flash eclipse from BSR
Sent from my MB870 using XDA
Straight from nitro in another thread. Sbf, take ota, root via motofail, install bsr and flash eclipse then profit. So much easier than the previous method.
Sent from my DROID X2 using xda premium
Straight from nitro in another thread. Sbf, take ota, root via motofail
Click to expand...
Click to collapse
saw that, but I haven't got motofail to work with 2.3.5/1.3.418
Ok, I just grabbed Motofail, gonna sbf and try it myself.
I am about to try this one more time I have been dealing with my psycho fish giving birth to about 80 swimming eyeballs so its been a crappy day and I hope my DX2 does not feel the wrath. I have Factory Rest the phone with and without Voodoo I have also let it OTA and that was with the Stock version 2.3.4 MOTO sent installed on the phone. I have missed a little step and I am going to do what well...all of you guys said and ill let ya know in about 30. Also you guys F-Ing ROCK!!!!
I sbf'd to 2.3.5 so that I could root my phone. Now that I am rooted my phone has went back to 2.3.5 so my question is, can I still flash a rom or is there something i need to do in order for it to work???
Thanks!!
Some roms for our X2 work with 2.3.4 others with 2.3.5. Check the posts for the roms you want they will tell you what you need to be on to flash that specific rom
Sent from my MB870 using XDA
GC3Wilson said:
I sbf'd to 2.3.5 so that I could root my phone. Now that I am rooted my phone has went back to 2.3.5 so my question is, can I still flash a rom or is there something i need to do in order for it to work???
Thanks!!
Click to expand...
Click to collapse
need more info, there is no sbf file for DX2 2.3.5 yet, so are you on an MX2?
three west said:
need more info, there is no sbf file for DX2 2.3.5 yet, so are you on an MX2?
Click to expand...
Click to collapse
There indeed is an sbf for 2.3.5, check the development forum, someone just did a thread with all OTA updates and sbf's
Sent from my MB870 using XDA
Never mind.. ignore..
Triscuit said:
There indeed is an sbf for 2.3.5, check the development forum, someone just did a thread with all OTA updates and sbf's
Sent from my MB870 using XDA
Click to expand...
Click to collapse
ahh, cool, indeed I stand corrected
to bad we can't root it yet though...unless I've been under a rock again and didn't hear about that...
the 2.3.5 SBF kinda doesn't make sense right now unless you want to stick with it cause you can't root it. You have to root 2.3.4 then apply the rootkeeper and then get to 2.3.5 via OTA update or flash via recovery.
three west said:
ahh, cool, indeed I stand corrected
to bad we can't root it yet though...unless I've been under a rock again and didn't hear about that...
Click to expand...
Click to collapse
Look through the genaral forums, there's a method or two out there. I just haven't used them yet.
Sent from my CM7'd Naturally Aspirated DX2
no method yet
without sbfing back to 2.3.4
sd_shadow said:
no method yet
without sbfing back to 2.3.4
Click to expand...
Click to collapse
Hmm I must have seen wrong
Sent from my CM7'd Naturally Aspirated DX2
nitro seemed to suggest, that motofail worked on 418, but it failed for me and several others
Hi, my name is Travis, I've been a verizon slave since 2009 with the bb storm. Moved to a droid then x and x2. I'm currently on an incredible 2 and I hate it. Through much push and pull, I got to keep my service on the incredible and also keep an x2 along with a free extended battery.
I rooted 2.3.5 on the x2 and now looking into roms. My software learning curve isn't steep so I thought I'd send a shout out to the devs and members here. Looking into finding a great rom for the x2 withing the next few day.
Oh yeah, I'm leaving in a month for basic in the AF, going into cyber surety(basically legal hacking) and looking forward to it.
Thanks for reading, I'll be around!
Welcome. Every one here is awesome and will help if you need it.
Most all x2 roms are built on 2.3.4
Eciplse is on 2.3.5 though, and is a very good, stable rom.
If you want more excitement than try some of the ics, cm9 based roms. Just know that they are buggy and being worked on. Aokp, paranoid android, and of course cm9.
Cm7 is much more stable then th ics builds and could easily work as a Daily driver.
Good Luck.
Sent from my DROID X2 using xda app-developers app
dark_system said:
Welcome. Every one here is awesome and will help if you need it.
Most all x2 roms are built on 2.3.4
Eciplse is on 2.3.5 though, and is a very good, stable rom.
If you want more excitement than try some of the ics, cm9 based roms. Just know that they are buggy and being worked on. Aokp, paranoid android, and of course cm9.
Cm7 is much more stable then th ics builds and could easily work as a Daily driver.
Good Luck.
Sent from my DROID X2 using xda app-developers app
Click to expand...
Click to collapse
I was thinking about the eclipse rom, It looks really nice. It will take a bit. I'm still reading and this forum is huge. I haven't found the "how to" thread yet on roms. Sure I'll find it. Thanks for the warm welcome.
I would check out the Cm7 rom thread. It has some good links to the guides you want as far as sbf, root, nandroid backup and bsr(aka cwm recovery).
Eclipse won't let you down.
If there is anything I can help you with, then don't hesitate to pm me.
Sent from my DROID X2 using xda app-developers app
Welcome aboard sir, and as an AF vet good luck with your service and thank you for stepping up.
As for roms you will find much more action happening with the 2.3.4 build as others have already mentioned. CM7 & 9, PA, AOKP are all based on 2.3.4.
You will absolutely want to find the "How to SBF" thread and get setup for doing an SBF. To my knowledge no dx2 has ever been "hard bricked" but "soft bricking" can and does happen which means SBF is your salvation as of course is nandroid backup. And my last piece of advice would be to make a nandroid backup of 2.3.4 Stock/Rooted, particularity if you are a"flashaholic" as some of us are on here...lol
Anyway welcome to the friendliest forum on XDA. :beer:
Sent from my MB870 using Tapatalk 2
+1 for eclipse since it is the most stable and sounds like you wont have much time for figuring out any bugs that may occur on the ICS based Roms since you will be serving our country lol. Good luck, and thanks.
Wow. Thanks for all the warm wishes and thanks for pointing me in the right direction. I'll be sure to post back about my Rom upgrade.
I like cm7 for the customizations, I have used eclipse for awhile and it's fantastic as well but i always find myself floating back to cm7. Just curious, there seems to be great roms for the dinc2, what about it did you not like?
Sent from my MB870 using Tapatalk 2
Directions on eclipse 2.3
http://forum.xda-developers.com/showthread.php?t=1198857
Step 4 says "Apply 235 update in stock recovery"
Is this update through the android recovery on startup, or after I get into settings?
Thanks for the help!
I tried going into recovery from start up and it just held up with the android icon and exclamation point in the triangle...for a really long time. OR cant I apply 235 with RSD and achieve the same thing
LinkedKube said:
http://forum.xda-developers.com/showthread.php?t=1198857
Step 4 says "Apply 235 update in stock recovery"
Is this update through the android recovery on startup, or after I get into settings?
Thanks for the help!
I tried going into recovery from start up and it just held up with the android icon and exclamation point in the triangle...for a really long time. OR cant I apply 235 with RSD and achieve the same thing
Click to expand...
Click to collapse
Did you press birth the up and down volume when you see the android?
Sent from my SCH-I535 using xda premium
LinkedKube said:
http://forum.xda-developers.com/showthread.php?t=1198857
Step 4 says "Apply 235 update in stock recovery"
Is this update through the android recovery on startup, or after I get into settings?
Thanks for the help!
I tried going into recovery from start up and it just held up with the android icon and exclamation point in the triangle...for a really long time. OR cant I apply 235 with RSD and achieve the same thing
Click to expand...
Click to collapse
First off...welcome! And now on to your question.
After rooting, protecting root with voodoo, and temp unrooting:
Just take the OTA update to 2.3.5 by going to System Updates in Settings-About Phone. Then restore root using voodoo and delete backup.
Sent from my Nexus 7 using xda app-developers app
System update is the easiest way but to answer your question yes you can just use rsd to get on 2.3.5 b418 because 2.3.5 is now rootable. You don't have to do the long method via voodoo ota rootkeeper any more.
Sent from my DROID X2 using xda app-developers app
Wow I feel like I've been struggling for nothing. I was already on a rooted version of 235
I also want to ask about the eclipse pack, it should be an unzipped file on my sd card correct? I'm reading around and I see "zipped" and "unzipped." This is my first rom so I need to be sure.
Thanks again.
LinkedKube said:
No I didnt, I'll try that now, but this is the correct method right? As stated in those directions?
Click to expand...
Click to collapse
Yes to get into recovery you have to press both simultaneously once you get on the android screen
Sent from my SCH-I535 using xda premium
LinkedKube said:
No I didnt, I'll try that now, but this is the correct method right? As stated in those directions?
Click to expand...
Click to collapse
If you have already SBFed and are going to do it that way then yes. Look here http://forum.xda-developers.com/showthread.php?t=1317707 for any future questions about SBFing or just ask. If you are already on 2.3.5 then there is no need to sbf because you can just root 2.3.5 now.
LinkedKube said:
Wow I feel like I've been struggling for nothing. I was already on a rooted version of 235
I also want to ask about the eclipse pack, it should be an unzipped file on my sd card correct? I'm reading around and I see "zipped" and "unzipped." This is my first rom so I need to be sure.
Thanks again.
Click to expand...
Click to collapse
All flashable roms should be a. Zip file on your sd card. Don't unzip the rom file.
Sent from my DROID X2 using xda app-developers app
Yup just leave it zipped and placed on sd card not in a folder. Boot into system recovery and "install zip from sd card."
Thanks, going to try this out!
Grrr. I'm getting
E:signature veridication failed
Installation aborted
WAIT WAIT, don't tell me. I can figure it out. I'll post back soon
Thanks
i totally used to be tech savy and had my old droid rooted with the rom miui loaded on it... i just recently got the droid x2 (2.3.5) and i do not know how to mod it...
reasons i am started a new thread is because i have a mac and all the supported threads on here are not only for windows, but for 2.3.4...
any help would be GREATLY appreciated!!
cheers
tmessy said:
i totally used to be tech savy and had my old droid rooted with the rom miui loaded on it... i just recently got the droid x2 (2.3.5) and i do not know how to mod it...
reasons i am started a new thread is because i have a mac and all the supported threads on here are not only for windows, but for 2.3.4...
any help would be GREATLY appreciated!!
cheers
Click to expand...
Click to collapse
First you need to root, check here http://forum.xda-developers.com/showthread.php?t=1818758
and if you are on 2.3.5 the only rom available is Eclipse, but its a good one. http://forum.xda-developers.com/showthread.php?t=1198857
I'd recommend sbf-ing back to 2.3.4 using RSD Lite. The X2 2.3.5 update, as far as I know, is not able to be rooted unless you root it while it's on 2.3.4 and then protect root before you apply the update. I'd go with the CM7 ROM which requires 2.3.4; been using it for 2 months with no issues.
2.3.5 is rootable, I know because I helped make it work, for the X2
see [How To] Root DX2 2.3.5/1.3.418 magic md5 method
http://forum.xda-developers.com/showthread.php?t=1818758
LeadoffMan131 said:
I'd recommend sbf-ing back to 2.3.4 using RSD Lite. The X2 2.3.5 update, as far as I know, is not able to be rooted unless you root it while it's on 2.3.4 and then protect root before you apply the update. I'd go with the CM7 ROM which requires 2.3.4; been using it for 2 months with no issues.
Click to expand...
Click to collapse
Ooohh, a terp in this place? (looks at my location... hehe.. terp here too)
sd_shadow said:
2.3.5 is rootable, I know because I helped make it work, for the X2
see [How To] Root DX2 2.3.5/1.3.418 magic md5 method
http://forum.xda-developers.com/showthread.php?t=1818758
Click to expand...
Click to collapse
I can verify this too.
litetaker said:
Ooohh, a terp in this place? (looks at my location... hehe.. terp here too)
Click to expand...
Click to collapse
Lol yea man. Movin back into College Park in a week or two.
And Shadow, my bad. I ran into you on another thread as well. I was unaware 2.3.5 could be rooted, I've been out of the loop for a while. Kudos for getting it rooted!!
i know this is going to be the deal breaker but i have a mac... and i cannot run those files///
How to: sbf on linux (and now OSX!) http://forum.xda-developers.com/showthread.php?t=1321061
then use petes root tools
Sent from my DROID X2 using xda premium