I cannot boot into my rom but I can boot into CWM however when i try to flash a rom i get this read out:
assert failed: getprop("ro.product.device") == "x10i" || getprop("ro.build.product") == "x10i" || getprop("ro.product.board") == "x10i" || getprop("ro.product.device") == "x10a" || getprop("ro.build.product") == "x10a" || getprop("ro.product.board") == "x10a" || getprop("ro.product.device") == "es209ra" || getprop("ro.build.product") == "es209ra" || getprop("ro.product.board") == "es209ra"
E:Error in /sdcard/update-cm-7.1.0-xperia-x10i-KANG-signed.zip
(status 7)
Installation aborted
What have I done wrong?
flash the stock rom - format sdcard on the phone (dont forget backup), and then once more again.
Quercus1 said:
flash the stock rom - format sdcard on the phone (dont forget backup), and then once more again.
Click to expand...
Click to collapse
Ta for the help do i flash stock ROM using flashtool then if CWM is bust?
yes - make your phone "virgin"
sorted almost worried for a sec there, nice to know the XDA communities always there for a noob
Related
Hi all
Serious problem with my mini st15i
I was running cm10 fxp 211 with mesa kernel v4.2
Yesterday everything magnified by 200% on the screen and I tried reflashing cm10
But my phone didn't allow me to.
Now I have tried 4 diff ROMs and have not been able to flash any.
This is the error message I get:
"Error updating zip file (status 7)" on TWRP recovery
Similar error on CWM
SOMEBODY PLEASE HELP!
Try this,
open the zip file in pc (don't extract)
navigate to META-INF>com>google>android>updator-script
try removing the first three lines using notepad++.
something like this
assert(getprop("ro.product.device") == "SK17i" || getprop("ro.build.product") == "SK17i" ||
getprop("ro.product.device") == "SK17a" || getprop("ro.build.product") == "SK17a" ||
getprop("ro.product.device") == "mango" || getprop("ro.build.product") == "mango");
f it still doesn't work, redownload the zip file, it will work
mnishamk said:
Try this,
open the zip file in pc (don't extract)
navigate to META-INF>com>google>android>updator-script
try removing the first three lines using notepad++.
something like this
assert(getprop("ro.product.device") == "SK17i" || getprop("ro.build.product") == "SK17i" ||
getprop("ro.product.device") == "SK17a" || getprop("ro.build.product") == "SK17a" ||
getprop("ro.product.device") == "mango" || getprop("ro.build.product") == "mango");
f it still doesn't work, redownload the zip file, it will work
Click to expand...
Click to collapse
Thank you!!!
You just revived my phone!:victory:
Wish I could hit thanks a few hundred times more!
please add [solved] to your thread title,
clcik edit on first post and go advanced and add [solved]
Hello all.
I recently saw a post about cm 10.1 for xperia p and i rushed to download and install it. I am using xperia p stock jb rom with unlocked bootloader , rooted with CMW and when i tried to flash it from CWM the instalation was aborted.(status 7) can someone help me please? i really want the android 4.2.2 thanks.
Just delete in zip archive in file \META-INF\com\google\android updater-script first 3 lines and flash archive!
Thanks for your interest but i already did, installation aborted status 0.
assert(getprop("ro.product.device") == "C5502" || getprop("ro.build.product") == "C5502" ||
getprop("ro.product.device") == "C5503" || getprop("ro.build.product") == "C5503" ||
getprop("ro.product.device") == "C5506" || getprop("ro.build.product") == "C5506" ||
getprop("ro.product.device") == "dogo" || getprop("ro.build.product") == "dogo");
but there are 4 lines not 3.
Download the zip again, or flash CM10.1 kernel, then install the rom.
kostasroussis66 said:
Thanks for your interest but i already did, installation aborted status 0.
assert(getprop("ro.product.device") == "C5502" || getprop("ro.build.product") == "C5502" ||
getprop("ro.product.device") == "C5503" || getprop("ro.build.product") == "C5503" ||
getprop("ro.product.device") == "C5506" || getprop("ro.build.product") == "C5506" ||
getprop("ro.product.device") == "dogo" || getprop("ro.build.product") == "dogo");
but there are 4 lines not 3.
Click to expand...
Click to collapse
This is archive not for Xperia P!
For Xperia P need LT22i!
And wrong forum!
For Xperia P only tihs: http://forum.xda-developers.com/showthread.php?t=2341139
@dimon it was the 1st file i used and appeared a problem. I will try again and i will try removing the 3 lines.
@razorka link for cm 10.1 kernel pls?
The kernel is in the zip:
boot.img
thanks guys i just deleted the 3 lines from updeter script and now it is installed! Ty all
An another question: Is it good and stable for everyday use? And when can i insert my PIN code? :S ty
Yes, it's able for daily use, very stable and smooth!
A definite noob in the Android world , I have rooted my phone using the package ZSMSA Android 4.1.2 root package from the instructions found here from android.gs ; and then proceeded to install CyagenoMod 10.1.2 rom . After rebooting I get errors which is similar to this :
assert failed: getprop("ro.product.device") == "galaxys2" || getprop("ro.build.product") == "galaxys2" ||
getprop("ro.product.device") == "GT-I9100" || getprop("ro.build.product") == "GT-I9100" ||
getprop("ro.product.device") == "GT-I9100M" || getprop("ro.build.product") == "GT-I9100M" ||
getprop("ro.product.device") == "GT-I9100P" || getprop("ro.build.product") == "GT-I9100P" ||
getprop("ro.product.device") == "GT-I9100T" || getprop("ro.build.product") == "GT-I9100T"
assert failed: getprop("ro.product.device") == "galaxys2" || getprop("ro.build.product") == "galaxys2" ||
getprop("ro.product.device") == "GT-I9100" || getprop("ro.build.product") == "GT-I9100" ||
getprop("ro.product.device") == "GT-I9100M" || getprop("ro.build.product") == "GT-I9100M" ||
getprop("ro.product.device") == "GT-I9100P" || getprop("ro.build.product") == "GT-I9100P" ||
getprop("ro.product.device") == "GT-I9100T" || getprop("ro.build.product") == "GT-I9100T"
My phone is GT i9100 . Is there anything be done to fix this . I am running Jelly Bean 4.1.2 .
I had the same error when first installing CyanogenMod 10.1 on my phone. First, make sure you have the correct version of CyanogenMod for your device (make sure it is for the GT-I9100, and not the GT-I9100T or other variants) and move the files to your computer.
Extract the .zip file.
Once unzipped, browse to the META-INF/com/google/android directory.
You will find two files called “update-binary” and “updater-script”.
Rename “updater-script” to “updater-script.txt” and open with a text file editor.
Delete the line starting with “assert” to first semi-colon, including the semi-colon. Usually this is the first line or one of the first lines at the top of the text file.
Save the file and rename it back to "updater-script".
Re-zip the new, edited files and copy to your phone (make sure you copy the edited file, not the original by accident).
Install the new, edited .zip in recovery and all should be fine
Also, try using different versions of CWM if this doesn't work first time. You can use the "ROM Manager" app to install different versions of CWM, try older or newer versions if installing CyanogenMod does not work with the edited .zip file.
Sent from my GT-I9100 using xda app-developers app
But there is a more simple solution. Lucky for you, the CyanogenMod Installer Beta has recently gone up, and the GT-I9100 is a supported device follow this link
https://plus.google.com/communities/103540722025986617902
and join the community, using the Installer should avoid errors like the one you are experiencing.
Sent from my GT-I9100 using XDA Premium 4 mobile app
I have the ROM TouchWiz-Resurrection V8.0 I want to put the kernel ThunderKernel 2.1 but which is not (cm7 - cmx or stock) .if I can help you choose the right kernel would appreciate it a lot
guerreroblanco said:
I have the ROM TouchWiz-Resurrection V8.0 I want to put the kernel ThunderKernel 2.1 but which is not (cm7 - cmx or stock) .if I can help you choose the right kernel would appreciate it a lot
Click to expand...
Click to collapse
Choose STOCK
Sent from my GT-S5830i using Tapatalk 2
Hitesh2626 said:
Choose STOCK
Sent from my GT-S5830i using Tapatalk 2
Click to expand...
Click to collapse
:good::good: thanks for replying , but when I install the stock phone will not turn on me , any help please
guerreroblanco said:
:good::good: thanks for replying , but when I install the stock phone will not turn on me , any help please
Click to expand...
Click to collapse
Hold down the power button until the phone screen goes on
Sent from my HTC One using XDA Premium 4 mobile app
guerreroblanco said:
:good::good: thanks for replying , but when I install the stock phone will not turn on me , any help please
Click to expand...
Click to collapse
Do these
1.Wipe data cache
2.wipe dalvick cache
3.Install update from sd card and flash ROM
4.Flash Thunderkernel
5.Wipe dalvick Cache
5.Reboot system Now .
Thats it
Sent from my GT-S5830i using Tapatalk 2
I try to flash this rom but fail during installation. How to flash it actually?
cursefinger said:
I try to flash this rom but fail during installation. How to flash it actually?
Click to expand...
Click to collapse
Where did you failed ?
Its important to flash it on Stock Rom
Sent from my GT-S5830i using Tapatalk 2
Hitesh2626 said:
Where did you failed ?
Its important to flash it on Stock Rom
Sent from my GT-S5830i using Tapatalk 2
Click to expand...
Click to collapse
Problem solve after did what you said :good:
Hitesh2626 said:
Do these
1.Wipe data cache
2.wipe dalvick cache
3.Install update from sd card and flash ROM
4.Flash Thunderkernel
5.Wipe dalvick Cache
5.Reboot system Now .
Thats it
Sent from my GT-S5830i using Tapatalk 2
Click to expand...
Click to collapse
thank you very much for responding. but I did as it is me and you pointed me in black screen after the samsung logo. after 5 min reboots and remains the same
guerreroblanco said:
thank you very much for responding. but I did as it is me and you pointed me in black screen after the samsung logo. after 5 min reboots and remains the same
Click to expand...
Click to collapse
Now first flash a fresh Stock Rom via Odin then do the above steps .
Hitesh2626 said:
Now first flash a fresh Stock Rom via Odin then do the above steps .
Click to expand...
Click to collapse
thank you very much for your answer. load the ROM via odin the (xxla2) and ise the process of wipes as me escrbiste reconose stock rom and my kernel without problems, but when installing the ROM TouchWiz V8.0-Resurrection I designed this ...
AROMA INSTALLER version 2.00
(c) 2012 by amarullz xda-developers
ROM Name : AROMA INSTALLER
ROM Version : 2.00
ROM Author : <[email protected]>
Device : Not Defined
Start at : Sun Jan 12 17:06:15 2014
script aborted: assert failed: getprop("ro.product.device") == "GT-S5830c" ||
getprop("ro.build.product") == "GT-S5830c" ||
getprop("ro.product.device") == "GT-S5830C" ||
getprop("ro.build.product") == "GT-S5830C" ||
getprop("ro.product.device") == "GT-S5830i" ||
getprop("ro.build.product") == "GT-S5830i" ||
getprop("ro.product.device") == "GT-S5830I" ||
getprop("ro.build.product") == "GT-S5830I" ||
getprop("ro.product.device") == "GT-S5830m" ||
getprop("ro.build.product") == "GT-S5830m" ||
getprop("ro.product.device") == "GT-S5830M" ||
getprop("ro.build.product") == "GT-S5830M" ||
getprop("ro.product.device") == "GT-S5839i" ||
getprop("ro.build.product") == "GT-S5839i"
assert failed: getprop("ro.product.device") == "GT-S5830c" ||
getprop("ro.build.product") == "GT-S5830c" ||
getprop("ro.product.device") == "GT-S5830C" ||
getprop("ro.build.product") == "GT-S5830C" ||
getprop("ro.product.device") == "GT-S5830i" ||
getprop("ro.build.product") == "GT-S5830i" ||
getprop("ro.product.device") == "GT-S5830I" ||
getprop("ro.build.product") == "GT-S5830I" ||
getprop("ro.product.device") == "GT-S5830m" ||
getprop("ro.build.product") == "GT-S5830m" ||
getprop("ro.product.device") == "GT-S5830M" ||
getprop("ro.build.product") == "GT-S5830M" ||
getprop("ro.product.device") == "GT-S5839i" ||
getprop("ro.build.product") == "GT-S5839i"
Installer Error
I hope you can help me, thanks in advance.
guerreroblanco said:
thank you very much for your answer. load the ROM via odin the (xxla2) and ise the process of wipes as me escrbiste reconose stock rom and my kernel without problems, but when installing the ROM TouchWiz V8.0-Resurrection I designed this ...
AROMA INSTALLER version 2.00
(c) 2012 by amarullz xda-developers
ROM Name : AROMA INSTALLER
ROM Version : 2.00
ROM Author : <[email protected]>
Device : Not Defined
Start at : Sun Jan 12 17:06:15 2014
script aborted: assert failed: getprop("ro.product.device") == "GT-S5830c" ||
getprop("ro.build.product") == "GT-S5830c" ||
getprop("ro.product.device") == "GT-S5830C" ||
getprop("ro.build.product") == "GT-S5830C" ||
getprop("ro.product.device") == "GT-S5830i" ||
getprop("ro.build.product") == "GT-S5830i" ||
getprop("ro.product.device") == "GT-S5830I" ||
getprop("ro.build.product") == "GT-S5830I" ||
getprop("ro.product.device") == "GT-S5830m" ||
getprop("ro.build.product") == "GT-S5830m" ||
getprop("ro.product.device") == "GT-S5830M" ||
getprop("ro.build.product") == "GT-S5830M" ||
getprop("ro.product.device") == "GT-S5839i" ||
getprop("ro.build.product") == "GT-S5839i"
assert failed: getprop("ro.product.device") == "GT-S5830c" ||
getprop("ro.build.product") == "GT-S5830c" ||
getprop("ro.product.device") == "GT-S5830C" ||
getprop("ro.build.product") == "GT-S5830C" ||
getprop("ro.product.device") == "GT-S5830i" ||
getprop("ro.build.product") == "GT-S5830i" ||
getprop("ro.product.device") == "GT-S5830I" ||
getprop("ro.build.product") == "GT-S5830I" ||
getprop("ro.product.device") == "GT-S5830m" ||
getprop("ro.build.product") == "GT-S5830m" ||
getprop("ro.product.device") == "GT-S5830M" ||
getprop("ro.build.product") == "GT-S5830M" ||
getprop("ro.product.device") == "GT-S5839i" ||
getprop("ro.build.product") == "GT-S5839i"
Installer Error
I hope you can help me, thanks in advance.
Click to expand...
Click to collapse
Now i think that Thunder kernel does not support these ROM
Have you tried with Rafael's Kernel ?
Try with it also because if it get succeed then it 100% the Rom does not support's thunder kernel ..(i think)
So try it and then reply.....
Hitesh2626 said:
Now i think that Thunder kernel does not support these ROM
Have you tried with Rafael's Kernel ?
Try with it also because if it get succeed then it 100% the Rom does not support's thunder kernel ..(i think)
So try it and then reply.....
Click to expand...
Click to collapse
Thunder Kernel isnt/doesnt allows to install another Custom rom ...
Better rivert back to stock , flash the Rom and then,flash the Kernel ..
Sent from my Desire SV
Hitesh2626 said:
Now i think that Thunder kernel does not support these ROM
Have you tried with Rafael's Kernel ?
Try with it also because if it get succeed then it 100% the Rom does not support's thunder kernel ..(i think)
So try it and then reply.....
Click to expand...
Click to collapse
thanks for replying. rafael kernel works perfectly without any problem in the ROM
I read that I can flash the p760 Cyanogen Mod [OFFICIAL] on my p765 (India) by simply removing the "nfc.apk" file. Is it true? Will it not be buggy?
Also, do I remove the "nfc.apk" after pasting CM11 on my sdcard, or before pasting (i.e., deleting the file from my computer) ? Or do I remove this file after I flash the custom ROM?
Any help will be appreciated!
Thanks!
It Works!
Doesn't matter now. I went ahead and flashed the p760 rom. It works perfectly fine!
lord stark said:
I read that I can flash the p760 Cyanogen Mod [OFFICIAL] on my p765 (India) by simply removing the "nfc.apk" file. Is it true? Will it not be buggy?
Also, do I remove the "nfc.apk" after pasting CM11 on my sdcard, or before pasting (i.e., deleting the file from my computer) ? Or do I remove this file after I flash the custom ROM?
Any help will be appreciated!
Thanks!
Click to expand...
Click to collapse
You will have battery drain of u dont disable NFC
Just flash the zip in the android development thread that I have shared
Sent from my LG-P760 using XDA Premium 4 mobile app
lord stark said:
Doesn't matter now. I went ahead and flashed the p760 rom. It works perfectly fine!
Click to expand...
Click to collapse
Hey man, even I'm trying to install cyanogenmod on my lg l9 p765. But when I try to install the .zip file from the cwm recovery mode, it says :
assert insert failed: getprop("ro.product.device") == "p760"
|| getprop("ro.build.product")=="p760"
E:Error in /storage/sdcard1/cm-10.2.1-p760.zip
(Status 7)
Installation aborted.
Please help me through this step!
Go to META-INF/com/google/android/updater-script
Open it and delete line which looks like this:
PHP:
assert(getprop("ro.product.device") == "p760" || getprop("ro.build.product") == "p760" ||
getprop("ro.product.device") == "p765" || getprop("ro.build.product") == "p765" ||
getprop("ro.product.device") == "p768" || getprop("ro.build.product") == "p768" ||
getprop("ro.product.device") == "u2" || getprop("ro.build.product") == "u2" || abort("This package is for \"p760,p765,p768,u2\" devices; this is a \"" + getprop("ro.product.device") + "\"."););
3016 6585566
Xerdox said:
Go to META-INF/com/google/android/updater-script
Open it and delete line which looks like this:
PHP:
assert(getprop("ro.product.device") == "p760" || getprop("ro.build.product") == "p760" ||
getprop("ro.product.device") == "p765" || getprop("ro.build.product") == "p765" ||
getprop("ro.product.device") == "p768" || getprop("ro.build.product") == "p768" ||
getprop("ro.product.device") == "u2" || getprop("ro.build.product") == "u2" || abort("This package is for \"p760,p765,p768,u2\" devices; this is a \"" + getprop("ro.product.device") + "\"."););
Click to expand...
Click to collapse
Thanks a lot, it worked!