hi there,
i searched the forum, but i didnt find someone else with this problem.
i've updated finally to 2.3.4 KI4, done a hardreset (phone AND usb disk), because of the minipaper widget bug, BUT my phone is laggy when i slide trough the 1st and 2nd homescreen with some shortcuts on it, there is NO smoothness. the same problem is when i scroll through my contacts (sometimes).
PS: this bug comes often but not every time ... maybe 8 out of 10 slides .....
i'm really clueless. can anybody help or have the same problem ? ? ?
THX
Try flashing again and KI4 should be 2.3.5 and not 2.3.4.
//edit
is there maybe another solution? i dont really want to flash my sgs2 because of warranty...
but the last update is 2.3.4 for my region, not 2.3.5 ... its DBT
http://forum.xda-developers.com/showthread.php?t=1075278
This link explains everything in the 1st few posts with download links you will need.
Don't be worried it is not complicated if you read carefully and follow the instructions.
Sent from my GT-I9100 using XDA App
in the time i done another hardreset.
thank you, i already read the post.
1. the last for my region (germany) XXKI4 DBT is 2.3.4 or am i wrong?
2. i loose my warranty if i flash ?
3. i have found that the bug comes when i install my apps .... but these apps i already had befor the update and there were no problems ...
alex2787 said:
in the time i done another hardreset.
thank you, i already read the post.
1. the last for my region (germany) XXKI4 DBT is 2.3.4 or am i wrong?
2. i loose my warranty if i flash ?
3. i have found that the bug comes when i install my apps .... but these apps i already had befor the update and there were no problems ...
Click to expand...
Click to collapse
I'm no expert. Someone like intratech is. As far as I know XXKI4 is the latest for some regions and is 2.3.5. Not to be confused with XWKI4 which is 2.3.4 I believe.
Never tried to get warranty but popular opinion is yes.
You can use a jig to reset your download flash counter and/or flash original firmware back before taking it in for fixing.
Edit: about the lag. Try isolating each app to see if one in particular is causing a problem. Process of elimination.
Hope this helps
Sent from my GT-I9100 using XDA App
aceofclubs said:
I'm no expert. Someone like intratech is. As far as I know XXKI4 is the latest for some regions and is 2.3.5. Not to be confused with XWKI4 which is 2.3.4 I believe.
Never tried to get warranty but popular opinion is yes.
You can use a jig to reset your download flash counter and/or flash original firmware back before taking it in for fixing.
Edit: about the lag. Try isolating each app to see if one in particular is causing a problem. Process of elimination.
Hope this helps
Sent from my GT-I9100 using XDA App
Click to expand...
Click to collapse
ohh it was my failure, its XWKI4 which is 2.3.4, you're right.
of course ... process of elimination ... i havent think about it,
ok i'll try it and post after that.
THX !
//edit
ok, i've done the eliminating but NO ONE of the apps is the problem. the bug is still there ...
is it maybe a bug of the TW louncher ? can i "reboot" it ? or maybe start / stop it ?
Related
I got fed up waiting for the latest update on my O2 S2 so thought i'd try the 2.3.4 update. I didn't at this time realise it was an XEU firmware.
Using Odin was straight forward and I completed the flash and started using the phone. I got some unexpected lag and thought i'd revert back to the original firmware but it is this that is causing me a problem.
I attempted the reflash with the O2 firmware (KE7),
I now get the O2 bubbles on start up (which was replaced but a fragmentated S on 2.3.4, official samsung I believe) and in phone settings its says 2.3.3 however when I connect to Kies it says the CSC is XEU and not 02.
I tried the '272' imei trick but only get 1 option XEU.
Can anybody please help me revert my phone back to original???
Here's hoping somebody can help..
Branded rom /provider rom post or how to debrand O2 phone posts from Dev section .
Essentially flash the O2 firmware through Odin
jje
Thanks for the reply. I 'think' i have solved it now. I had flashed it with Odin but only once i had cleared the partition cache did Kies show the right firmware.
It does mean i have lost all of my apps so now am looking at a good backup app.
Any suggestions for a non rooted phone?
TheOriginalTableLeg said:
Thanks for the reply. I 'think' i have solved it now. I had flashed it with Odin but only once i had cleared the partition cache did Kies show the right firmware.
It does mean i have lost all of my apps so now am looking at a good backup app.
Any suggestions for a non rooted phone?
Click to expand...
Click to collapse
You can't backup apps unless your rooted as these live on the root of your phone.
You can root and keep the phone stock and not flash any custom roms.
Im on o2 uk. Had the xeukd1 csc before i switched.
If any of my friends asked me i would tell them to root and install a custom rom and kernel.
The themes and tweaks available are great. The biggest thing for me is the battery life. I now get only 1% battery drain overnight (7 hours) someone else on the same rom and kernel went over 6 days without charge.
Never would have got this before.
Sent from my Galaxy S2
Many thanks for the reply.
It certainly sounds very interesting. I am new to rooting only having learnt about the basics of it over the past couple of days.
I presume therefore that should the need ever arise restoring the phone to its original firmware spec (as at time of purchase, and should warranty work be required) is possible?
I think I need to go and read some more on rooting.
TheOriginalTableLeg said:
Many thanks for the reply.
It certainly sounds very interesting. I am new to rooting only having learnt about the basics of it over the past couple of days.
I presume therefore that should the need ever arise restoring the phone to its original firmware spec (as at time of purchase, and should warranty work be required) is possible?
I think I need to go and read some more on rooting.
Click to expand...
Click to collapse
Go to intratech's thread in original android development find out what firmware modem and csc you're using download and keep in a safe place. This is then your return to factory settings if you have a warranty issue.
If you need any help pm me as I won't always be popping in to this thread.
Sent from my Galaxy S2
mredfern79 said:
Go to intratech's thread in original android development find out what firmware modem and csc you're using download and keep in a safe place. This is then your return to factory settings if you have a warranty issue.
If you need any help pm me as I won't always be popping in to this thread.
Sent from my Galaxy S2
Click to expand...
Click to collapse
Many thanks for the help thus far.
I'm sure i'll be in touch to quiz you about a few things via PM.
Thanks again.
I was on Samsung GT-I9100 / I9100XXK14 / 2.635.7-I9100XXK14 before rooting and flashing custom roms. On 2nd flash I lost all sms and call logs (nothing else) while using Titanium Backup Pro. I also had backed up in Kies. But found out I can't restore from Kies becuz it doesn't recognize custom rom. Purchased TB after I lost original XXK14 firmware due to a botched backup on my part. Can anyone help me get back to my XXK14 firmware temorarily so I cans restore sms and call logs?
tlmacson said:
I was on Samsung GT-I9100 / I9100XXK14 / 2.635.7-I9100XXK14 before rooting and flashing custom roms. On 2nd flash I lost all sms and call logs (nothing else) while using Titanium Backup Pro. I also had backed up in Kies. But found out I can't restore from Kies becuz it doesn't recognize custom rom. Purchased TB after I lost original XXK14 firmware due to a botched backup on my part. Can anyone help me get back to my XXK14 firmware temorarily so I cans restore sms and call logs?
Click to expand...
Click to collapse
I am in the same boat. I am running westcrip ics remix. I find it little buggy I want to return to my stock, but haven't found solution yet. I tried to look for stock rom ....couldn't find it.
Sent from my GT-I9100 using xda premium.
Hey search the forums lots of helpful threads to use odin to flash back a stock rom.
Heres a link to a specific stock rom, KI4 is in the list.
http://forum.xda-developers.com/showthread.php?t=1075278
Also for help with random questions and using ODIN to flash.
http://forum.xda-developers.com/showthread.php?t=1125282
Saw this link earlier but the XXK14 download link is broken and I'm not knowledgable as to what other stock roms I can use here in the U.S. on AT&T (not sure that carrier is an issue other than the fact ATT is GSM / HSPA+ 21 Mbps). I'd really appreciate directions to an alternate XXK14 link and/or another compatible GB 2.3.5 stock firmware.
Search Samfirmware.com
tlmacson said:
Saw this link earlier but the XXK14 download link is broken and I'm not knowledgable as to what other stock roms I can use here in the U.S. on AT&T (not sure that carrier is an issue other than the fact ATT is GSM / HSPA+ 21 Mbps). I'd really appreciate directions to an alternate XXK14 link and/or another compatible GB 2.3.5 stock firmware.
Click to expand...
Click to collapse
I did it. Back to stock 2.3.6 unrooted all good.
Sent from my GT-I9100 using xda premium
rdhalla said:
I did it. Back to stock 2.3.6 unrooted all good.
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
Can you supply a link please, as this is the 1 I am looking for? Thanks in Advance.
chunderman said:
Can you supply a link please, as this is the 1 I am looking for? Thanks in Advance.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?p=23561521#post23561521
What continent do you live in, I need this in order to display the correct firmware downloads for your area and ROM version.
Chris.
themadba said:
What continent do you live in, I need this in order to display the correct firmware downloads for your area and ROM version.
Chris.
Click to expand...
Click to collapse
Sorry, I live in the UK. Thanks in advance.
The USB port has gone and I want to return it during warranty.
---------- Post added at 01:04 AM ---------- Previous post was at 12:56 AM ----------
ctomgee said:
http://forum.xda-developers.com/showthread.php?p=23561521#post23561521
Click to expand...
Click to collapse
Thats this thread?
Sure ! Lemme get back home and ill post with all the required links.
Sent from my GT-I9100 using xda premium
chunderman said:
Thats this thread?
Click to expand...
Click to collapse
Specifically to the post that said to search on samfirmware.com.
ctomgee said:
Specifically to the post that said to search on samfirmware.com.
Click to expand...
Click to collapse
I've checked and can't see anything there. Thanks.
Alternatively use Check Fus, Google it.
Sent from my GT-I9100 using xda premium
Here is what you need to do
1. Get Check FUS downloader: LINK
2. Run FUS Select you Carrier / Region / Model and Download the Stock firmware for your phone.
3. Backup anything you need. You will need to wipe the data and the cache from Recovery mode before you flash the downloaded Fware..
4. Use ODIN and Flash the Downloaded Stock Firmware to your phone. You will loose the root access and you should have your stock back. Yeah before Install Wipe data and cache.
Lemme know if that works. If any doubt... just ask. Dont do anything wrong i'll try to help if i know the answer.
chunderman said:
I've checked and can't see anything there. Thanks.
Click to expand...
Click to collapse
Did you try the "firmwares" link??
I have concerns about you flashing your phone if you can't navigate a website... No offense. I'm not trying to be insulting, but it's really easy to find.
Hi guys,
I'm a newbie so please bare with me. I have a Virgin Mobile UK Samsung Galaxy S2 which was on Gingerbread 2.3.4 or 5. I foolishly flashed it yesterday to yes you guessed it, ICS 4.0.3. Now as far as the phone itself is concerned, everything is working pefectly fine. No issues whatsoever except now I've noticed that my carrier has changed to T-Mobile UK even though the phone has full functionality on the Virgin network still? Also I get the "This device cannot download firmware" message now when connected to Kies.
Have I totally ruined my phones chances of downloading any official firmware in the furture now? And how can I correct the display of my carrier? I'm guessing I will have to find a stock ROM from somewhere and re-install. But doesn't that do something to a ROM install counter someware on the phone?
Thank you in advance.
E-Nigma said:
Hi guys,
I'm a newbie so please bare with me. I have a Virgin Mobile UK Samsung Galaxy S2 which was on Gingerbread 2.3.4 or 5. I foolishly flashed it yesterday to yes you guessed it, ICS 4.0.3. Now as far as the phone itself is concerned, everything is working pefectly fine. No issues whatsoever except now I've noticed that my carrier has changed to T-Mobile UK even though the phone has full functionality on the Virgin network still? Also I get the "This device cannot download firmware" message now when connected to Kies.
Have I totally ruined my phones chances of downloading any official firmware in the furture now? And how can I correct the display of my carrier? I'm guessing I will have to find a stock ROM from somewhere and re-install. But doesn't that do something to a ROM install counter someware on the phone?
Thank you in advance.
Click to expand...
Click to collapse
You are fine. Nothing has gone wrong. Use the FUS and get the stock firmware for you phone. Flash it via ODIN... Read the above few posts.
For your Flash counter and Bin counter, You can reset it back to zero. Look for Triangle.apk . TO use that you need to have a rooted device. Super user permissions... so run Triangle while you have rooted device? If not then root it to reset the bin or flash counter ( If you want) or just flash back the stock Fware..
No you havent ruined you phone. You can download all official firmwares. Just wait for the offical ICS for your region.
Hi,
Thanks for the quick reply. So just to clarify... If I re-install the stock firmware there will be no need to root the device and install the program that resets the counters?
Also, I've noticed that Virgin Mobile UK isn't listed under my territory?
Thanks again.
E-Nigma said:
Hi,
Thanks for the quick reply. So just to clarify... If I re-install the stock firmware there will be no need to root the device and install the program that resets the counters?
Also, I've noticed that Virgin Mobile UK isn't listed under my territory?
Thanks again.
Click to expand...
Click to collapse
From memory the only CSC that has Virgin UK is the CPW one Carphone Warehouse . Flash that or enter network settings manually .
jje
Hi there.
I'm running into a specific problem with my SGS2.
After successfully upgrading to multiple Stock ICS from this thread : http://forum.xda-developers.com/showthread.php?t=1544487 , I keep receiving the same message when I try to make a phone call : "NOT REGISTERED ON THE NETWORK".
The phone is not picking up my network and it's on Emergency calls only.
At first, 3G/HSPDA connectivity wasn't working. Only WiFi was working.
However after following a procedure on another thread, I entered the code *2767*3855# immediatly after flashing yet another stock ICS rom.
To my surprise the 3G/HSPDA connectivity was working this time. I took as a sign of victory, but that was only short noticed since the phone was still on Emergency calls only and it still gave me that network error message.
Guys PLEASE I implore you to help me find a solution.
I've flashed the above stock rom (using ODIN of course) in the following order :
1.) I9100XWLP4_I9100LUXLP1_LUX
2.) I9100XWLP7_I9100OXELP7_SER
3.) I9100XWLP7_I9100XEULP5_XEU
What could have possibly went wrong ?
I reside in Cape Town, South Africa. I did the flashing for a friend and his network works just fine....
Any help would be greatly appreciated.
Kind Regards,
Steve
No one is willing to help?
Sent from my GT-I9100 using xda premium
pstevek said:
Hi there.
I'm running into a specific problem with my SGS2.
After successfully upgrading to multiple Stock ICS from this thread : http://forum.xda-developers.com/showthread.php?t=1544487 , I keep receiving the same message when I try to make a phone call : "NOT REGISTERED ON THE NETWORK".
The phone is not picking up my network and it's on Emergency calls only.
At first, 3G/HSPDA connectivity wasn't working. Only WiFi was working.
However after following a procedure on another thread, I entered the code *2767*3855# immediatly after flashing yet another stock ICS rom.
To my surprise the 3G/HSPDA connectivity was working this time. I took as a sign of victory, but that was only short noticed since the phone was still on Emergency calls only and it still gave me that network error message.
Guys PLEASE I implore you to help me find a solution.
I've flashed the above stock rom (using ODIN of course) in the following order :
1.) I9100XWLP4_I9100LUXLP1_LUX
2.) I9100XWLP7_I9100OXELP7_SER
3.) I9100XWLP7_I9100XEULP5_XEU
What could have possibly went wrong ?
I reside in Cape Town, South Africa. I did the flashing for a friend and his network works just fine....
Any help would be greatly appreciated.
Kind Regards,
Steve
Click to expand...
Click to collapse
HEY STEVE sorry for the state ur into now ok just forget the same i think its all bec u have installed some leaked ver of ICS rather than the official one's
hence just try to dwnld the official ones of ur choice from the below link to flash thro' odin hope it will resolve ur issue
http://forum.xda-developers.com/showthread.php?t=1075278
pstevek said:
No one is willing to help?
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
Bumping posts in a short time space is not allowed this is not Samsung service fix your phone forum .
First is to check you have the correct IMEI on your phone .
If not then restore your backed up EFS folder .If you have not backed up EFS then you need to start reading the IMEI and EFS posts .
jje
Sun90 said:
HEY STEVE sorry for the state ur into now ok just forget the same i think its all bec u have installed some leaked ver of ICS rather than the official one's
hence just try to dwnld the official ones of ur choice from the below link to flash thro' odin hope it will resolve ur issue
http://forum.xda-developers.com/showthread.php?t=1075278
Click to expand...
Click to collapse
Hey. I tried to download those firmwares but they've all been removed from HotFile.
Thank you though
JJEgan said:
Bumping posts in a short time space is not allowed this is not Samsung service fix your phone forum .
First is to check you have the correct IMEI on your phone .
If not then restore your backed up EFS folder .If you have not backed up EFS then you need to start reading the IMEI and EFS posts .
jje
Click to expand...
Click to collapse
Sorry I have no idea. I'm pretty new to all these...
I don't even know what and EFS is....
If you could help me locate that thread I'll do well to read it and follow your advice...
Thank You
pstevek said:
Hey. I tried to download those firmwares but they've all been removed from HotFile.
Thank you though
Sorry I have no idea. I'm pretty new to all these...
I don't even know what and EFS is....
If you could help me locate that thread I'll do well to read it and follow your advice...
Thank You
Click to expand...
Click to collapse
hey pal i just checked the dwnld issue and its working fine try dwnldn XXlPQ or ZSlPE the ar both multi csc abd should work fine for u the ar by intratec
pstevek said:
Hey. I tried to download those firmwares but they've all been removed from HotFile.
Thank you though
Sorry I have no idea. I'm pretty new to all these...
I don't even know what and EFS is....
If you could help me locate that thread I'll do well to read it and follow your advice...
Thank You
Click to expand...
Click to collapse
IMEI.
http://forum.xda-developers.com/showthread.php?t=1372169
http://forum.xda-developers.com/showthread.php?t=1377105
FAQ
http://forum.xda-developers.com/showthread.php?t=1065995
NEW HERE
http://forum.xda-developers.com/showthread.php?t=1134290
bible
http://forum.xda-developers.com/showthread.php?t=1473577
Guide
http://forum.xda-developers.com/showthread.php?t=1125282
Rohan
Hi i am having the same error, i have tried two different versions of ICS both are official versions. They both install fine and after the phone reboots it goes straight to the home screen without asking for the code. The data network is not active as well as the phone. When i try to make a call it gives me the
"not registered on network error"
I have even tried updating via kies which produces the same result.
The last two installs i tried was with ODIN.
I have gone back to version 2.3.4 which is working fine
any help will be greatly appreciated thanks you
Rohan
Remove battery then check on the underside of the phone your model no.
What country ?
What carrier are you with?
What ICS are you trying to install?
Which gingerbread are you able to use?
PS you can find out which firmware you are on by dialing *#1234#
Post your information
Sent from my GT-I9100 using Tapatalk 2
Thanks for the quick reply here is the info you requested
Model No - GT I9100
Country - South Africa
Carrier - MTN
ICS - 4.0.3 (I9100XWLP7_I9100OJCLP6_I9100XXLPS_HOME.tar) Downloaded using
CheckFusDownloader_v2.1
Ginger Bread - ver. 2.3.4 (currently using)
My Current firmware is
PDA - I9100XWKI4
PHONE - I9100XXKI1
CSC - I9100OJCKI1
Thanks again...
Rohan_187 said:
Thanks for the quick reply here is the info you requested
Model No - GT I9100
Country - South Africa
Carrier - MTN
ICS - 4.0.3 (I9100XWLP7_I9100OJCLP6_I9100XXLPS_HOME.tar) Downloaded using
CheckFusDownloader_v2.1
Ginger Bread - ver. 2.3.4 (currently using)
My Current firmware is
PDA - I9100XWKI4
PHONE - I9100XXKI1
CSC - I9100OJCKI1
Thanks again...
Click to expand...
Click to collapse
Definately the firmware for South Africa; "Samfirmware shows both to be either Vodafone or XFM".
While on Gingerbread backup your EFS using HC-Ktool or any other EFS backup tool if thats not available in your country.
You could then if needed restore using the same app.
What sort of code do you normally have to input before you get to your main home screen?
Do you do a complete data/factory reset and full wipe/format system before installing new firmware.
Sent from my GT-I9100 using Tapatalk 2
Hi it's a sim card code i input before i get to the home screen. I did a factory reset and erased the usb storage, and then i used odin to load ICS on the phone.
So you say it must be the firmware since i am on MTN and i am trying to load a vodaphone rom?
Try a firmware from here:-
http://forum.xda-developers.com/showthread.php?t=1075278
instructions of how to flash are also posted there.
Look for your region or a multi CSC region.
(taken from a previous post).
Copy your internal sdcard and external micro sdcard to your PC.
Boot into recovery. Data factory reset. Advanced option, wipe dalvik cache.
Mounts and storage option, format system; data; sdcard.
Also try Ultimate cleaning script
http://forum.xda-developers.com/show....php?t=1166954
Install correct stock firmware using Odin or place a custom rom zip on your sdcard and install from recovery.
Once firmware has booted, from the dial pad, dial *2767*3855#
This will factory data reset.
Wait for firmware to reboot.
Hopefully after that you should be OK.
I got the same probleme some time ago. The only workaround was to switch off the pin-code in settings and then turn it on again...
After flashing a new firmware and do a full wipe, the problem was gone...
Thanks guys i will try both these methods and report back...
First of a big THANK YOU to both of you guys for helping...
-I 1st did a factory reset
-Then Disabled the Sim Card Pin Request
-Downloaded the XFA firmware that you told me to download
-Flashed with ODIN and ICS was working.
Oh before i did all of this i downloaded an official version of Android 2.3.4 and flashed to phone.
I don't know if that had anything to do with it but just thought i would mention it in case it did.
So thanks again guys really awesome...
Rohan_187 said:
First of a big THANK YOU to both of you guys for helping...
-I 1st did a factory reset
-Then Disabled the Sim Card Pin Request
-Downloaded the XFA firmware that you told me to download
-Flashed with ODIN and ICS was working.
Oh before i did all of this i downloaded an official version of Android 2.3.4 and flashed to phone.
I don't know if that had anything to do with it but just thought i would mention it in case it did.
So thanks again guys really awesome...
Click to expand...
Click to collapse
Flashing back to original firmware , ie gingerbread is always a good idea. On quite a few threads, members have had problems going from one ICS to another.
Pleased it has worked out for you.
Sent from my GT-I9100 using Tapatalk 2
bored_stupid said:
Flashing back to original firmware , ie gingerbread is always a good idea. On quite a few threads, members have had problems going from one ICS to another.
Pleased it has worked out for you.
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
Had the same problem today, rang my network provider (3 UK ), they thought it was a sim issue too. Wasn't resolved but hey XDA to the rescue yet again. Many thanks to you folks its now solved.
Big love XDA and especially all in this forum
Rohan_187 said:
First of a big THANK YOU to both of you guys for helping...
-I 1st did a factory reset
-Then Disabled the Sim Card Pin Request
-Downloaded the XFA firmware that you told me to download
-Flashed with ODIN and ICS was working.
Oh before i did all of this i downloaded an official version of Android 2.3.4 and flashed to phone.
I don't know if that had anything to do with it but just thought i would mention it in case it did.
So thanks again guys really awesome...
Click to expand...
Click to collapse
you are probably missing the keystr file in efs\imei folder. Just restore back that file and you can use back the sim card pin lock. i had a similar issue previously too.
Rohan_187 said:
First of a big THANK YOU to both of you guys for helping...
-I 1st did a factory reset
-Then Disabled the Sim Card Pin Request
-Downloaded the XFA firmware that you told me to download
-Flashed with ODIN and ICS was working.
Oh before i did all of this i downloaded an official version of Android 2.3.4 and flashed to phone.
I don't know if that had anything to do with it but just thought i would mention it in case it did.
So thanks again guys really awesome...
Click to expand...
Click to collapse
THANK GOD I found this thread !! thanks mates
hi there, please i'll be thankful if you could help me installing arabic read and write to my new at&t samsung sgh i777 ... i searched in the forum ad found some threads like
http://forum.xda-developers.com/showthread.php?t=1292841
but my phone does not meet the prerequisites bcz my PDA ends with uckk6 and it says make sure it ends with UCKH7 ...
my phone details is
m.number : samsung sgh i777
andriod version : 2.3.6
bassband version : i777uckk6
kernal version : 2.6.35.7
build number : gingerbread.uckk6
Just use Odin to flash that firmware
Sent from my SGH-I777
122ninjas said:
Just use Odin to flash that firmware
Sent from my SGH-I777
Click to expand...
Click to collapse
THANK YOU SO MUCH it worked fine for reading the arabic text and I installed the GO keyboard for writing, I was afraid that it will corrupt my firmware but you encouraged me, and it runs good ... only sometimes brings application not responding -force close- but I'm OK with it, but will be nice if there are some ways to get rid of it??
The instructions in the firmware were probably written before AT&T put out the first Gingerbread update. I remember that thread about arabic in the development section when the phone was first released.
creepyncrawly said:
The instructions in the firmware were probably written before AT&T put out the first Gingerbread update. I remember that thread about arabic in the development section when the phone was first released.
Click to expand...
Click to collapse
creepyncrawly: you mean the error msg maybe from the version mismatch??
ciemo87 said:
creepyncrawly: you mean the error msg maybe from the version mismatch??
Click to expand...
Click to collapse
I was making an assumption without really knowing. Assumptions can get you into trouble sometimes, because they are often wrong.
I was assuming that the installation instructions were written before UCKK6 was released. But it may be that it is not fully compatible with UCKK6, and that is why the FC's. But on the other hand, maybe it caused FC's on UCKH7, and the version is not an issue. Or maybe you just need to reinstall it, or wipe and reinstall it... or...
I shouldn't really be posting or talking about this because I have absolutely zero experience with it.
creepyncrawly said:
I was making an assumption without really knowing. Assumptions can get you into trouble sometimes, because they are often wrong.
I was assuming that the installation instructions were written before UCKK6 was released. But it may be that it is not fully compatible with UCKK6, and that is why the FC's. But on the other hand, maybe it caused FC's on UCKH7, and the version is not an issue. Or maybe you just need to reinstall it, or wipe and reinstall it... or...
I shouldn't really be posting or talking about this because I have absolutely zero experience with it.
Click to expand...
Click to collapse
no problem your zero experience does helped in fact .. because I have minus experience I just had the device a month ago and just started to get familiar with it ... today I decided to download ICS 4.1 but don't know weather it is supporting arabic or not?? you can help me if you can because I'm still junior member and can't look up everywhere, as i don't know much about the forum yet .. thanks in advance
I belive AOKP has it. There are 2 languages there that looks Arabic.
Do a full wipe and flash.
Read all the OP
http://forum.xda-developers.com/showthread.php?p=24275279
Sent from my SGH-I777 using xda app-developers app
Hey,
Please forgive me if this and following questions have been answered already. I'm casual reader of XDA Forums. Before posting this thread I've done a lot of searching and reading (it took me past 2 hours) and still I'm unsure as to the answer.
I hope it's perfectly fine to have more questions in the thread than one.
All I could find about my current phone and rom running on it:
https://dl.dropbox.com/u/18067902/Screenshot_2013-01-28-13-05-57.png
https://dl.dropbox.com/u/18067902/Screenshot_2013-01-28-13-10-43.png
https://dl.dropbox.com/u/18067902/Screenshot_2013-01-28-13-13-56.png
So to the point. I'm curious if there are any consequences of flashing ROM and not using the correct CSC,
I wanted to flash latest JB on my phone - the official stock ROM from Spain. I'm afraid of doing it because I'm not sure what will happen.
Will my phone be debranded?
Some background info: I bought the phone in Poland. Flashed stock ICS ROM with multiCSC and chose XEO as you can see in the screenshot above. Now I'm living in Denmark. I'd like to get the latest JB on my phone, debranded. What should I do?
Another small question - where can I get the latest version of Odin? I've been looking for some official site for it but to no avail. It seems that I'm too stupid for that.
Thanks in advance for your time and hopefully an answer to my questions (also if any further arise).
NB Sorry for using wrong terms throughout the post - I'm kinda newbie to all of these.
learn about "brickbug first".
you are on 4.0.4....
Sent from the little guy
gastonw said:
learn about "brickbug first".
you are on 4.0.4....
Sent from the little guy
Click to expand...
Click to collapse
After running the "Got brickbug?" app it appears that mine phone is affected by it. Should I wait for the official OTA then?
Also there are still few questions unanswered from the OP. I'd like to know that stuff.
Brickbug is a hardware problem but only matters if you have a kernel that is not patched for it. Just don't wipe or format the phone till you are sure you have a kernel that is safe.
Furai90 said:
After running the "Got brickbug?" app it appears that mine phone is affected by it. Should I wait for the official OTA then?
Also there are still few questions unanswered from the OP. I'd like to know that stuff.
Click to expand...
Click to collapse
Brick bug was a start, I assume you've done more reading about all those answers you were looking for.
CSC will work for every I9100, you were reffering to MODEM.
Go ahead and flash jb from spain, if your network doesn't work (unlikely but possible) you'll have to flash another modem.
And yes, your device will be fully unbranded.
Sent from the little guy