Related
This is a dev thread. Do not install this release unless you know what you're doing. Do not post if you have nothing to contribute.
This is very early build, we're behind other qsd8k devices but will eventually catch up
Big thanks to all qsd8k developers working on this (N1, Desire, HD2, X10).
[KERNEL]
- ol' good 2.6.29-SEMC
- fixed touchscreen driver (now backward-compatibile with Gingerbread)
[ROM]
- partially based on drewis release (thanks!) - currently I don't have access to PC that could handle compilation of the whole thing
If someone could compile clean es209ra build and upload it would be awesome.
[WORKING]
- it boots
- radio, calls, txt (sms)
- audio partially working (in-call is fine, playing mp3/ringtones leads to WLOD)
- bluetooth, GPS seem to work
- wifi almost working ("can't find wlan0 device")
- mobile data (it gets IP but disconects afterwards, needs investiagtion)
[NOT WORKING]
- most of the stuff does not work
- quite unstable
[SOURCES]
Will upload all of the useful code/fixes here.
- ICS + GB compatibile touch driver: es209ra_touch_mt.c
- compatibile ramdisk (props FXP): http://www.mediafire.com/?1n51pn1upwv79ur
[DOWNLOAD]
Alpha1 ROM (for CWM5) + corresponding kernel (flashtool) is here:
http://www.mediafire.com/?ht6p6tbpj2988d4
Cheers,
z
Just did a major clean up on this thread mates....no more "thanks" posts please. If thankful... click the thanks button.
Regards,
M_T_M
Finally we get it. aZuZu is working on ASOP ICS 4.0.1. This may help him work easier. So with locked bootloader, can we flash cause' you wrote there CWM5?
VIDEO
here's a video for ics on x10 alpha build 1
http://www.youtube.com/watch?v=bsOFn4YLvZU
@frosty666 please kindly include this on your ics discussion thread.
thankz
hi zdzihu, its great to see you back! is this only temporary or, are you going to be more active, like before?
mmmkay, I'm not dev, but I want to ask if you're compiling this from ground up (like Jerpelea's CM7), or you're like just mashup of current SE and ICS sources. if its a mashup, I can help. but I do very little design from ground up things.
Sent from my X10i using xda premium
if you have fixed audio hw sources i could recompile..
altho i have complete es209ra compile with ics hw, old cm gralloc / copybit sources and generic audio..
So for me doesn't even boot
As i came from night shift i will try later on more...
Here you are libhardware.so, libhardware_legacy.so & wpa_supplicant from my compiled ICS build so if someone can boot z rom maybe it could test this too
p.s.
it is searching ar6000.ko as normal stock one not wifi.ko as sdk port
aZuZu said:
So for me doesn't even boot
As i came from night shift i will try later on more...
Here you are libhardware.so, libhardware_legacy.so & wpa_supplicant from my compiled ICS build so if someone can boot z rom maybe it could test this too
p.s.
it is searching ar6000.ko as normal stock one not wifi.ko as sdk port
Click to expand...
Click to collapse
Hi Azuzu, I am able to compile single libs and binaries (libhw_legacy, supplicant), it's just dex and stuff causing problems (1GB of ram + 1.6GHz). As for libaudio, I will take a look soon
Cheers,
z
I help if u want
Hello guys, I'm new to the forum and I hope to see well with you.
I would be willing to help compile the source since EXCLUSIVELY use only Linux operating system and is much easier to work on programming because most of the libraries are already installed by default, I hope I was clear.
greetings
Joseph
zdzihu said:
Hi Azuzu, I am able to compile single libs and binaries (libhw_legacy, supplicant), it's just dex and stuff causing problems (1GB of ram + 1.6GHz). As for libaudio, I will take a look soon
Cheers,
z
Click to expand...
Click to collapse
yaay Z!!!
glad to see back!
now i feel so bad & depressed that i dont have a working x10 with me
hope that service center guy is able to repair it again...
@aZuZu
can u please upload ur work-in-progress sources to git... i know how much fixing u have done... it might help other too
aZuZu said:
So for me doesn't even boot
As i came from night shift i will try later on more...
Here you are libhardware.so, libhardware_legacy.so & wpa_supplicant from my compiled ICS build so if someone can boot z rom maybe it could test this too
p.s.
it is searching ar6000.ko as normal stock one not wifi.ko as sdk port
Click to expand...
Click to collapse
so good
I will try to build ICS this weekend!
I have no time this weekday
Zdzihu, if the wifi still reports the same error (can't find wlan0 device), it probably means that the kernel refers to wlan interface as eth0. Try changing the wifi.interface entry in build.prop to eth0.
little help for folks that compile ICS on weak pc
make: *** [out/target/common/obj/JAVA_LIBRARIES/framework_intermediates/noproguard.classes-with-local.dex] Killed << if processes during compile get killed try this script > Fix Swap
Well to me helped so maybe it helps other ppl.
Has anyone pulled this Kernel apart, i'm trying to lock down some of the touch screen info but I can't gunzip the ICS ramdisk...not even sure if i should be able to.
I GPIO the main files out, can't see anything pertinent in there, so I can only assume its in this ramdisk...biggest problem is that if it is a corrupted archive I can't get ubuntu to open a recovery tool cos it's implementation of the Zlib system sucks dice
WHAT IS IT WITH SOME OF YOU GUYS, IT IS DEV ONLY THREAD AT THE REQUEST OF THE DEVELOPER, IF YOU CAN'T FOLLOW SIMPLE RULES THEN INFRACTIONS WILL BE HANDED OUT, YOU HAVE NOW BEEN WARNED!
wbbigdave said:
Has anyone pulled this Kernel apart, i'm trying to lock down some of the touch screen info but I can't gunzip the ICS ramdisk...not even sure if i should be able to.
I GPIO the main files out, can't see anything pertinent in there, so I can only assume its in this ramdisk...biggest problem is that if it is a corrupted archive I can't get ubuntu to open a recovery tool cos it's implementation of the Zlib system sucks dice
Click to expand...
Click to collapse
gunzip -c <ramdisk.gz> | cpio -i
Cheers,
z
The next member who disregards a developers request and posts in a non helpful way will be banned for a week.
i encourage any dev or helpful member to pm me or any other mod with the offending post and the user will be dealt with
Please don't reply tp them to tell them they are breaking th rules as you post will then also be rule break worthy
Hugs and kisses
PiLoT
http://review.cyanogenmod.com/#q,status:merged+project:CyanogenMod/android_frameworks_base,n,z
sorry for posting here. but is for development. for ICS, can we used modified 2.6.29, and modify, like what zdzihu did, it so it 100% or do we have to use 3.x (or whatever) becuase I'm starting to do kernel mods and I want to see what I can contribution.
so in all, does the newest kernel have to be ported? or can we continue using good old 2.6.29 and keep Modding it? (hopefully camera will work, drivers have to be rewritten for kernel. and no one likr to write drivers)
Sent from my X10i using xda premium
In case, we can see here how they get the SD Card working
http://forum.xda-developers.com/showthread.php?p=19774268#post19774268
Hello! I just recently got a brand new MyTouch4GSlide ($5 from t-mobile xD) Anyhow since the lack of development going on for this phone I decided to join in and do my part... My original plan was to create a simple CM7 Kernel with support for UV and OC + Smartass... I have successfully in the past week set up my ubuntu virtual machine, kernel source, kitchen (boot.img extract/compile), voltage table & have successfully compiled a custom working kernel for my device, but i just need a bit of help.... I have 3 specific questions wich hopefully someone will be able to answer so I may get better with developing and continue developing in the future...
1) Adding new frequencies to the kernel
-I have created my voltage table and have added it to the file acpuclock-8x60.c (Which is corresponding to my device) located in /arch/arm/mach-msm O have also disabled the performance lock in the .config file using the make menuconfig command but when I compile the kernel and flash it setcpu does not recognize the frequencies... Did I not edit the correct file? Am I missing a lock placed by HTC somewhere else?
2) Adding Smartass
-I have found 1 source for the smartass module but whenever I try to compile the module I get #define OFS_KALLSYMS_LOOKUP_NAME 0xc009684c // kallsyms_lookup_name any reason why this is? am I using the wrong source? is there an easier way?
3) WiFi Module
-Whenever I compile my kernel the WiFi does not turn on... Probably because I have not compiled a Wifi module -_- but how can I compile a WiFi module? do I use the same source as the kernel? how would I go about doing this? how do I pack it with the boot.img?
Thats all for now... I shall edit this if I have more questions... I shall constantly be checking this thread hoping for some responses... I am eager to get this working!
Thanks in advanced! ~GiGoO
P.S. If you want you may add me on Skype if you would like to help me with this xD (robster105)
gigoo25 said:
Hello! I just recently got a brand new MyTouch4GSlide ($5 from t-mobile xD) Anyhow since the lack of development going on for this phone I decided to join in and do my part... My original plan was to create a simple CM7 Kernel with support for UV and OC + Smartass... I have successfully in the past week set up my ubuntu virtual machine, kernel source, kitchen (boot.img extract/compile), voltage table & have successfully compiled a custom working kernel for my device, but i just need a bit of help.... I have 3 specific questions wich hopefully someone will be able to answer so I may get better with developing and continue developing in the future...
1) Adding new frequencies to the kernel
-I have created my voltage table and have added it to the file acpuclock-8x60.c (Which is corresponding to my device) located in /arch/arm/mach-msm O have also disabled the performance lock in the .config file using the make menuconfig command but when I compile the kernel and flash it setcpu does not recognize the frequencies... Did I not edit the correct file? Am I missing a lock placed by HTC somewhere else?
2) Adding Smartass
-I have found 1 source for the smartass module but whenever I try to compile the module I get #define OFS_KALLSYMS_LOOKUP_NAME 0xc009684c // kallsyms_lookup_name any reason why this is? am I using the wrong source? is there an easier way?
3) WiFi Module
-Whenever I compile my kernel the WiFi does not turn on... Probably because I have not compiled a Wifi module -_- but how can I compile a WiFi module? do I use the same source as the kernel? how would I go about doing this? how do I pack it with the boot.img?
Thats all for now... I shall edit this if I have more questions... I shall constantly be checking this thread hoping for some responses... I am eager to get this working!
Thanks in advanced! ~GiGoO
P.S. If you want you may add me on Skype if you would like to help me with this xD (robster105)
Click to expand...
Click to collapse
Hey Rob, I wish you the best of luck and don't give up!
The one thing I can say is when I was compiling my own kernels a while back and when I was trying to do the exact same thing and add different frequencies, if I remember correctly, there is a couple files that need to be changed, not just one, but don't quote me on that
I would also try getting help from other phone developers too. Post in the Q&A section of the phones, you might get more help that way.
Other then that good luck!
Questions or Problems Should Not Be Posted in the Development Forum
Please Post in the Correct Forums
Moving to Q&A
Just rambling here. In order to get ICS ported to the Venue, we need compatible kernel drivers. It appears, from what I can find on the 'net, that Qualcomm isn't releasing drivers for the QSD8250 for ICS. Looking around XDA, I see the HTC Desire (GSM), also based on the '8250, has a working ICS beta found here: http://forum.xda-developers.com/showthread.php?t=1403113. This appears to use a Tiamat kernel, http://tiamat-dev.com/tiamat_bravo/. Using the AOSP 4.0.x repository, the Dell info from http://opensource.dell.com/releases/venue/v4.06/ and the Tiamat kernel, is it possible to pull together an ICS port? I wish I had more experience with this type of stuff...
Dell used the CAF 8260 GB sources when building 4xx roms, they simply backported whatever they need to from their already working 3xx codebase for whatever was needed (i assume)
CAF itself dropped support for 8x50 in their GB codebases, but the 8x60 is close enough it didnt really matter ultimately.
Much of the drivers arnt even in the kernel, they're in the android userland which is Apache and not gpl, hence the driver issue.
Which ever method you (presumedly do) to get the kernel booting under ICS doesnt really matter, but the more difficult/time-consuming methods will ultimately be more useful for porting to newer kern versions.
Don't forget the Nexus One and, IIRC, the HD2 also use the 8250
I would think this would help too: http://www.xda-developers.com/android/qualcomm-releases-adreno-2xx-gpu-binaries-for-ics/
Too bad the development work is well outside my capabilities. Maybe our Korean friends are working on it though.
Guys.!!! Dell venue n dell streak 5got same rom n environment hardware too just diffrence is venue is Hdpi n dell streak is Mdpi .so why do nt we join hands n make ics work for dell or on other hand u can take advantage of our dell streak 5 formus there r few good roms like longhorn 2.8 with Hdpi support for dell Venue and Dcs 1.1.which supports both hdpi n mdpi just need to edit build.prop n may be kernel....whish u all safe cooking ...n Friends in need friend indeed ..
Max
Sent from my Dell Streak using xda premium
Sent from my Dell Streak using xda premium
Folks, I can see that Qualcomm released Adreno 200 drivers for ICS several months ago (Mar) (https://developer.qualcomm.com/mobi...phics-optimization-adreno/tools-and-resources).
Information in the above page also says that, the drivers has been tested on CAF M8960AAAAANLYA1030. As I noticed, whenever we get the source code from Code Aurora, there is also a kernel directory included. Do you think that we can start from that kernel to port ICS to Venue?
chacona said:
Folks, I can see that Qualcomm released Adreno 200 drivers for ICS several months ago (Mar) (https://developer.qualcomm.com/mobi...phics-optimization-adreno/tools-and-resources).
Information in the above page also says that, the drivers has been tested on CAF M8960AAAAANLYA1030. As I noticed, whenever we get the source code from Code Aurora, there is also a kernel directory included. Do you think that we can start from that kernel to port ICS to Venue?
Click to expand...
Click to collapse
Yes we can,
But I aint that good into dev
This mobile has what it requires to run ICS
The kernel itself ultimately doesnt matter, as long as it has the right code changes merged in.
The current S5 ICS kernel's lineage is:
S5/405 (dell) -> Phoenix kernel/GB (n0p) -> Phoenix/cm7.2 (hPa) ?-> Phoenix/cm9 (hPa) -> Phoenix/AOSP (kibuuka)
Only the final step involved merging in any changes to make it work with ics, ultimately it's based mostly on the phoenix GB kernel which itself is based on the S5's 405 kernel
S5 405 = S5 408 = V 406 = V 408, they're all the same kernel (with ifdefs/configs for the S5/V).
I'd imagine getting a V kernel to boot ICS period is 85% of the work as the S5's froyo/GB kernels can directly boot V froyo/gb roms, and the reverse would likely hold.
The kernel 405/6/7/8 from Dell can be built successfully, however there are known issues such as after charging, we won't be able to boot the kernel up. I do not have a Streak, so I wonder whether those issues are fixed well in Phoenix kernel Manii? Can you show me how to get the source for the latest phoenix kernel that you're using with your Streak AOSP? Maybe I will try to build with Venue myself to see how things work!
phoenix kernel/ICS - Github
It's currently in the process of being merged back in.
You could try diffing S5 405 with V 406 and seeing what's changed in the source, they're nearly identical, but I dont expect them to be bit identical
TheManii said:
phoenix kernel/ICS - Github
It's currently in the process of being merged back in.
You could try diffing S5 405 with V 406 and seeing what's changed in the source, they're nearly identical, but I dont expect them to be bit identical
Click to expand...
Click to collapse
Sounds interesting, that's exactly what I did in my custom overclocked kernel. However, I will be able to save some time by using their kernel directly. In fact, I think that 405/407 kernel is not very different from 406 since my build for 405 also ran on DV too.
I will try with their "master"/experimental14 branch kernel first (to CM 7.2.0). Thanks for your information!
chacona said:
I will try with their "master"/experimental14 branch kernel first (to CM 7.2.0). Thanks for your information!
Click to expand...
Click to collapse
Will be waste of time as only streak-specific file is board-qsd8x50_austin.c, other changes are device-independent.
Changes that essential to run ics with hwa:
kgsl3.8 - kernel-side drivers are in drivers/video/msm - direct drop in instead of one that's shipped with stock 405 kernel
include/linux/msm-kgsl.h - to make kgsl3.8 build
(not really)*streak-specific*changes to arch/arm/mach-msm/board-qsd8x50_austin.c - changes in hardware init routines needful for kgsl3.8 (updated data structures, powerrail). In short - do a diff for board-qsd8x50_austin.c between Phoenix and ics branches to find out what's changed - to be honest - changes are generic for qualcomm devices, so direct copy/paste of changes into your device's board file will do the job
Other patches that were applied to ics branch are optional (cpu governors, io schedulers, netfilter specific changes (these are only needed if you need ics' mobile data usage collecting/limits features)) or affect streak-specific drivers only (and are not ics-specific).
So, in short - update your device's board file and use ics branch - that would be enough.
kibuuka said:
So, in short - update your device's board file and use ics branch - that would be enough.
Click to expand...
Click to collapse
Do you think I can start with the stock kernel, download the ICS tree including the kernel, then do the diff/merge between device's board file from ICS kernel to Dell kernel? After that, the original Dell kernel is patched with new stuffs for ICS, and can be used with ICS ROM?
i can also provide you with all patches made for streak against aosp source tree for shortening your mileage and instructions for a quickstart (my streak is broken at the moment, so i've suspended my development activities and got spare time for that)
please mention kernel for streak's ics is being built separately at the moment (i've got plans incorporating it in aosp build process, but it will take some time)
when i've messed with streak kernel making it ics-friendly i've realised that most of stuff can be made cross-compatible between two devices.
It's 95% the kernel, the only thing left is to turn off the rotation patch and swap out the BCM4325 for BCM4239 drivers.
On stock 3/4xx i can directly load venue roms on my S5 and only wifi is broken. (with a S5 kernel) Everything else works.
TheManii said:
It's 95% the kernel, the only thing left is to turn off the rotation patch and swap out the BCM4325 for BCM4239 drivers.
Click to expand...
Click to collapse
rotation is triggerable through kernel configuration menu. check.
as of wifi - is there any known-to-be-trustable list of hardware components for venue?
The V is just an S5 without the hdmi and whatever provides usb hosting.
The only other notable change is the wifi chip.
All the other sensors are compatable, and so is the modem+ril.
(I was able to get 3g working, but not wifi due to the chip being different)
I dont think anyone has done a (good quality) teardown on the V though.
Most I can offer is to pull details android gives back while it's on.
I'm guessing that's how CM7.2 was ported, since hPa didnt actually own a V,
he just took his S5 build, and flicked a few switches.
(it helped a lot that CM7.2 doesnt need any kernel changes to boot, it's just the stock 408 one with a modded ramdisk)
He only had access to a V for like a day or so.
kibuuka said:
i can also provide you with all patches made for streak against aosp source tree for shortening your mileage and instructions for a quickstart (my streak is broken at the moment, so i've suspended my development activities and got spare time for that)
please mention kernel for streak's ics is being built separately at the moment (i've got plans incorporating it in aosp build process, but it will take some time)
when i've messed with streak kernel making it ics-friendly i've realised that most of stuff can be made cross-compatible between two devices.
Click to expand...
Click to collapse
Hi Kibuuka, that sounds good, could you please share?
One more thing I would like to ask is, the stock kernels 405/407 and 406 have issues regarding power (sometime I can see the issue that after charging, screen goes black and we can only quit that situation by removing the battery). How did you address it? (I notice that your kernel works well on my CM7, without that issue - or is just simply because it has not happened yet?)
n0p did enormous amount of work addressing sleep of death issue (which, i believe is one you refer to), so dsc kernels (opposed to stock ones) are free of this bug. Ask him for details (i wasn't involved to dsc development at the point he managed to fix it) as he's best source of information on SoD issue fix you could find
As of aosp patchset - will upload it during weekends.
For whatever it's worth, as soon as we get a working ICS level kernel, I plan on porting TWRP and CWM-touch.
Those require ICS kernels (or rather it's a great deal more difficult to make them run on GB kernels) and I cant port them until then.
I've already gotten TWRP and CWM-touch working on the S7, and plan on porting TWRP to the S10 now.
Edit: come to think of it, I actually have TWRP running on a 5xx kernel (which is HC), i'll try simply porting and seeing what happens
I just found a way to overclock the GPU on all xperias. Need some testers, but remember, it might damage your device!
I will releasing here test kernels for X8, but these MIGHT DAMAGE your devices, so you flashing on your own.
XDA:DevDB Information
Pepejson-Kernel, a Kernel for the Sony Ericsson XPERIA X8
Contributors
mamutos
Kernel Special Features:
Version Information
Status: Testing
Created 2013-11-05
Last Updated 2013-11-05
I compiled the first version, but have probably a bad ramdisk, not even the logo shows up and gets into bootloop.
I need nAa-jb-06 ramdisk. @nobodyAtall Can you share it with me ?
Thanks.
1. We need a "little bit" more information about this project
2. The kernel is GPL protected, need the source (to identify what is your work and who worked with the kernel earlier)
3. The "original development" section need at least one idea what not exists on this device.
4. The "GPU overclock": with the msm7x27 SoC, the GPU clock is LOCKED, always run on the axi bus speed, you can't set it separately. You can set the GPU speed if you play with the axi bus speed in the acpuclock.c, but this is not a new idea.
5. The overclock of the GPU in our msm7227 SoC is theoretically unusable, because our adreno200 is cpu limited in most case. Just check the same gpu in the qsd8250, and you can see, with more powerful cpu this gpu can perform much better (on same clock)
This is NOT an offense, I just point to some thing before tons of idiot questions arrived about the project.
So, better if you correct the opening post and give the required informations, and folloew the forum rules (before you get a warning from a moderator, for example: due the missing sources)
PS.: you can cut the ramdisk from the precompiled nAa-06 kernel. I you have the knowledge to make new gpu overclock method, this is easy work...
PS.2.: Okay, just find the lz4 header in the kernel.sin, and delete everything before this and you can get the original nAa-06 ramdisk
Last note: maybe I wrote incorrect informations, the more experienced members/developers can correct it.
EDIT: the to overclock the gpu on all xperias is nonsence, because the xperia family have different gpus. (the most is adreno powered, but the phones with novathor SoC have Mali 400MP, or the xperia C have PowerVRSGX544)
I don't understand this kind of thread , first test then post it and do a favor for all do not create it in original DEV section this is not belong here .
Thanks whore?
Sent from my E15i using Tapatalk 2
pilu1978 said:
4. The "GPU overclock": with the msm7x27 SoC, the GPU clock is LOCKED, always run on the axi bus speed, you can't set it separately. You can set the GPU speed if you play with the axi bus speed in the acpuclock.c, but this is not a new idea.
Click to expand...
Click to collapse
I don't knew that. Sorry
Topic to remove.
Yet again this highlights the fragmentation of development here.
@op - I you had performed a search or even browsed here a little you would seen active kernel development.
You unwillingness to ask to join such a group of guys or even just post in their threads to contribute leads me to thinking you're a glory hunter.
And then when you ask nAa to just send you his ramdisk I honestly nearly wet myself.
Thanks for the laugh chap - I'm even gonna thank you for it
Q&A for Kobo Arc Development
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for Kobo Arc Development. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Kobo Arc 7HD OTG
ginco95 said:
Does somebody know how to enable usb otg on rooted Arc 7 HD?
Click to expand...
Click to collapse
DoPa made a patch to give OTG to the Sero 7 PRO (sero7pro-usbotg-dopa-v1.1.zip)
(See http://forum.xda-developers.com/showthread.php?t=2470998)
Could this be used to give OTG to the Kobo Arc 7HD or could it be modified to do so?
If this can be done, please give instructions about how to install patch to the Kobo Arc 7HD.
Thanks
stock rom
can someone please provide a download link for the original kobo arc 7 android 4.2.2 jellybean firmware zip cause I was such an idiot and I didn't back up data and I try to make a custom rom and the device is now bricked with boot loop adb doesn't work and fastboot doesn't work either please provide a download link
Kobo Arc (OLD), status?
Hi guys,
I've just read through the whole thread and frankly it just gave me a headache. I'm a software developer and I'd like to help, but I have zero experience with android or Cyanogenmod so I need some help. I have the OLD Kobo Arc and I'd love to be able to install something more recent than the latest official ancient Android 4.1.1 system update. So, let me fire a few questions:
1. Can anyone quickly summarize where we are with the OLD Kobo Arc? Do I understand correctly that you guys have so far managed to root it but unfortunately all attempts to go any further have failed?
2. Considering that the Kobo Arc has the same SoC (omap 4470) as the Nook HD+, what are the chances of cm-10.2.1-ovation.zip working (as far as I can see this is the latest for the Nook HD+ - sorry I can't post the link)? Of course there can be all kinds of different drivers required for the two devices, but chances are that they could be both based on the same or similar OEM designs. At least could this be used as basis to create a Kobo Arc variant?
3. Has anyone tried the Nook HD+ image?
4. All things considered, what is the next step towards a working rom?
Kobo arc 7 rom needed
my kobo arc 7 crashed cause i install chainfire 3d and now it is bricked and stuck in boot logo i need the stock rom cause i don't have any backup. can someone please give a link to download the kobo arc 7 stock android 4.2.2 rom
RC Files and thoughts on Custom Kernel
Hi, I am a new user here and in my attempt to give a reply to this user in this development thread , I got some weird restriction.
Anyway I have attached the .rc files that exist on my device. The init.carrier.rc and init.environ.rc did not exist on my device. This device is a KOBO ARC 10HD.
In addition, I have also been playing around with the kernel sources for the 10HD in particular, and as you can see from the screen shot below I am currently running my own custom kernel build.
Frankly I do not know how useful a custom kernel is since many of the special features are so heavily coded. Take the cpu governors for example, the way in which the cpufreq features are implemented make adding governors somewhat useless. There is a tegra cpufreq driver that parks the device in userspace, and decides based on the user interaction which governor is used. I suspect this has to do with the power saving features built into the stock ROM as well. In essence if I add let us say, a new governor, even if I select it as my preference the tegra cpufreq driver still has control, and defaults back into userspace once again.
Releasing userspace control of the CPU, GPU, and Cpuquiet parameters [Kobo Arc 10HD]
As some of you may have realized, it is impossible to successfully change some cpu, gpu, and cpuquiet related settings (ie. governors). This is due to a unified user daemon running in the background that constantly monitors and regulates the cpu, gpu, and cpuquiet (hot plugging) components. This means that you cannot change any of these options without them being immediately changed by this unified user daemon in userspace.
I had initially thought that this restriction was the result of a userspace kernel implementation, but it is simply a really annoying daemon messing with the kernel parameters.
To disable this functionality cleanly rename "/system/bin/ussrd" to "/system/bin/ussrd.bak" so that nvusd cannot initialize it.
This gives you complete userspace control over all cpu, gpu, and cpuquiet parameters! Do not touch the ussr_setup.sh, or you will lose important permissions to certain parameters. Do not do anything crazy like set the min and max frequencies to 51 MHz! The power saving features still work!
Good luck! Tell me if this solves your governor problems . . .