MUIU rocks... i love this rom! However, anyone know of a way to configure the compass in this rom? it seems to partially work, for the most part, the accelometer takes over.... if you load a compass or app that uses it, it will face north where ever your phone is tilted up(ex, if you hold the phone level then elevate the bottom of the phone where touch sensitive buttions are... the compass will think that is north..... at first you would think its just plain broken and that it is only useing the accelometer, but if you take a magnet and put it near the phone, the compass will change direction by the magnet... so it seems to me that there are 2 inputs being activated here... with the most prominent being the accolemeter
is this a driver issue or is there any known way to hack/calibrate this?
there are several apps that depend on the compass to work properly(star charts/ google sky ect..)
i really dont want to flast back to 2.2....
Flip it up and down a few times.
Sent from my SGH-T959 using xda premium
Related
When I play games like temple run, my phone tilts to the left by itself. Is this hardware related problem? I already tried other roms but the problem remains. There are games/applications that let you tweek the default axis, but only for that specific app. Is there a way to repair this?
Sent from my MB860 using Tapatalk
I wold like to know the answer to this too, i remember that at the first run i did a calibration setup and i can't seem to find that in the menu, the only thing is the compass calibration that doesn't seem to change anything for the g-sensor. Now my phone is about 4 degrees tilted to the left. PLEASE HELP!
What do you mean at the first run? Are you sure the calibration was for the phone axis? I be searched the web long enough to know that there is no such setting on the ATRIX. The only calibrating thing is the compass and that has nothing to do with tilting(I think ;p)
Sent from my MB860 using Tapatalk
Legea.Sanatatii said:
I wold like to know the answer to this too, i remember that at the first run i did a calibration setup and i can't seem to find that in the menu, the only thing is the compass calibration that doesn't seem to change anything for the g-sensor. Now my phone is about 4 degrees tilted to the left. PLEASE HELP!
Click to expand...
Click to collapse
Mine is tilted 4 degrees to the left too! Could it be a coincidence?
Sent from my MB860 using Tapatalk
My compass works in Zdevice test, but not in certain apps (Though it used to) - it doesn't work when I press compass button in Maps and doesn't work in compass specific apps. It DOES work in Yelp monocle.
Any ideas? I've fixed permissions, done clean installs, everything.
One bump before I give up on this. (don't really use compass mode that much, but would be nice to fix)
Try gps status app. It has a compass calibration tool that will tell you to rotate the phone 2-3 times on each axis. Fixed my wonky readings I had.
Sent from my Evo LTE using Tapatalk 2
kmyerslp said:
Try gps status app. It has a compass calibration tool that will tell you to rotate the phone 2-3 times on each axis. Fixed my wonky readings I had.
Sent from my Evo LTE using Tapatalk 2
Click to expand...
Click to collapse
Just downloaded that - compass doesnt respond at all in that app. It only seems to respond in ZDeviceTest.
It seems like the majority of apps aren't able to "talk" to the compass sensor, but for whatever reason ZDeviceTest can.
Update: I just downloaded "smart compass" and it works fine - Maps will still not enter Compass view. SO CONFUSED
Is there a workaround or fix to the proximity sensor issue when using CyanogenMod 10.1? It doesn't matter which dialer I use, my screen goes blank and I can't get it back on to use the keypad or hang up.
Thanks in advance.
Mr.Preacher said:
Is there a workaround or fix to the proximity sensor issue when using CyanogenMod 10.1? It doesn't matter which dialer I use, my screen goes blank and I can't get it back on to use the keypad or hang up.
Thanks in advance.
Click to expand...
Click to collapse
See if enabling wake on volume helps:
Settings > Display > Volume rocker wake
Mr.Preacher said:
Is there a workaround or fix to the proximity sensor issue when using CyanogenMod 10.1? It doesn't matter which dialer I use, my screen goes blank and I can't get it back on to use the keypad or hang up.
Thanks in advance.
Click to expand...
Click to collapse
If you are using a screen protector, there is a known issue regarding placement. If the protector cutout is too close to the sensor, it will interfere with the proper operation of the sensor and blank out the screen too easily.
I ran into a similar issue, turns out the tinting on the screen for the sensors had gotten dirty inside and I had to disassemble my phone and clean the sensor Windows. However if you don't like the idea of disassembling your phone, the HTC rezound proximity calibrator app on Google play might be helpful to you. I would try the app first before doing something more extreme.
retrostudd said:
I ran into a similar issue, turns out the tinting on the screen for the sensors had gotten dirty inside and I had to disassemble my phone and clean the sensor Windows. However if you don't like the idea of disassembling your phone, the HTC rezound proximity calibrator app on Google play might be helpful to you. I would try the app first before doing something more extreme.
Click to expand...
Click to collapse
I don't have a screen protector. This solved it for me. Many thanks.
That said, the settings I'm using are a little weird. I have the Low set to 81, and it doesn't seem to matter what the High is set to (currently 100).
This fix works
retrostudd said:
I ran into a similar issue, turns out the tinting on the screen for the sensors had gotten dirty inside and I had to disassemble my phone and clean the sensor Windows. However if you don't like the idea of disassembling your phone, the HTC rezound proximity calibrator app on Google play might be helpful to you. I would try the app first before doing something more extreme.
Click to expand...
Click to collapse
this totally worked to fixed this same issue I have had. I used to have to go outside on a sunny day for my screen to come on while making a phone call. Once I used this app I was able to get it to come on in a dark room with hardly any light. I may at some point open her up and actually clean the inside of the sensor cover, but for now this worked like a charm.
Thanks for the tip.
One item to note, if you do decide to open your phone and clean the sensor windows, don't clean too aggressively or you will remove the tint from the backside of the glass. Just a tip.
I'm glad you guys have gotten your sensors working again.
I just had this problem today. Previously I never had issues with prox sensor, but just a couple days ago I did a complete wipe (data, cache, dalvik, system and internal SD card) and installed RC1 with a fresh install. The app mentioned above DID fix my issue however I know its a ghetto fix. Before running the app, the proximity sensor would work normally in good light, but not in low light. After running the app it works even in dark light which is great. However, I know its a weird fix. I can actually see the red proximity sensor during calls, when I couldn't previously. I'm glad I got it working, but I know there is something wrong still, and it's definitely ROM related as opposed to hardware because just 2 days earlier it worked fine before the clean install. Hmm..
Sent from my Incredible 4G LTE using xda app-developers app
my phone (Xperia mini pro) unlocks itself way too often when it's sitting in my pocket. I was using a MIUI ROM for some time and there was that cool feature that didn't allow to unlock the screen when the proximity sensor sensed something in its... proximity. I really miss it, but I don't feel like switching from CM to MIUI just for it.
I know there are lots of apps like Gravity Screen Off or Cover Algorithm, but they don't do exactly what I wan't to have (or I didn't explore them enough), as I don't want to lock/unlock my phone by the sensor or anything. just a simple thing:
0. the screen is locked and turned off
1. the home/power button is pressed
2. the app checks the proximity senor's state
2a. if something's covering the sensor (e.g. my pocket's inside), the touchscreen is disabled (and some message appears to say so)
2b. if nothing's covering the sensor, then unlocking the screen is allowed
did anyone found something like that in Play Store?
I think Gravity Screen Off should help you
Sent from my GT-S5830i using xda app-developers app
iamareebjamal said:
I think Gravity Screen Off should help you
Sent from my GT-S5830i using xda app-developers app
Click to expand...
Click to collapse
I've tried it, and as much as I like the concept, the phone sometimes unlocks itself because of all that shaking in my pocket when I'm walking or running, and there's no possibility to turn the accelerometer off and just use the proximeter. but I guess that's the best option there is.
So I'm using the CM11 4.4 Kitkat on my Galaxy S4 and recently found out that my proximity sensor isn't working (when I dial the screen goes black and won't turn on until the call is over). I've read many threads about fixing it but I think it's broken. So all I want now is to disable it but there isn't such option in the Cyanogenmod. Is there anyway to disable it, like with a terminal or something?
bump
bump!
with root explorer go to system/lib/hw and go all the way to the bottom to the last sensors file. its an so file. long press on it and open in text editor. somewhere in the page almost at the bottom you will see where it says ProximitySensor then on one of those line it should say mEnabled. just rename it to mDisabled, then reboot and the proximity sensor is fixed.
qman66 said:
with root explorer go to system/lib/hw and go all the way to the bottom to the last sensors file. its an so file. long press on it and open in text editor. somewhere in the page almost at the bottom you will see where it says ProximitySensor then on one of those line it should say mEnabled. just rename it to mDisabled, then reboot and the proximity sensor is fixed.
Click to expand...
Click to collapse
I know this is an old thread but qman66 you are AWESOME! Was going nuts trying to fix the proximity sensor problem. Ran the commands in terminal emulator that recalibrates the sensor, didn't work for me. Blasted the speaker with compressed air, also didn't work for me. But this method allowed me to disable the proximity sensor while still using an AOSP rom. I will send the phone in for warranty eventually, but I thought I was going to have to use a touchwiz rom until then (touchwiz has the option of disabling the proximity sensor in the call menu).
And I read like 5 or 6 different threads dealing with the Galaxy S4 proximity sensor issue and no one else posted this method before.
kg2128 said:
I know this is an old thread but qman66 you are AWESOME! Was going nuts trying to fix the proximity sensor problem. Ran the commands in terminal emulator that recalibrates the sensor, didn't work for me. Blasted the speaker with compressed air, also didn't work for me. But this method allowed me to disable the proximity sensor while still using an AOSP rom. I will send the phone in for warranty eventually, but I thought I was going to have to use a touchwiz rom until then (touchwiz has the option of disabling the proximity sensor in the call menu).
And I read like 5 or 6 different threads dealing with the Galaxy S4 proximity sensor issue and no one else posted this method before.
Click to expand...
Click to collapse
glad someone found this useful.
While this fixed the call locking problem, it also disables a lot of other hardware sensors. The only one I'd care about is the gyroscope for rotating the camera and watching videos full screen. Any solutions?
sjschoo said:
While this fixed the call locking problem, it also disables a lot of other hardware sensors. The only one I'd care about is the gyroscope for rotating the camera and watching videos full screen. Any solutions?
Click to expand...
Click to collapse
Yeah I noticed that, the best solution is to get the proximity sensor fixed in the end. Then you don't have to disable anything. If your lucky it doesn't even need to be replaced, just cleaned. For me I can live with no rotation, because the screen off during calls is a ridiculous PITA by comparison. Also apps can force landscape mode even with the gyroscope not working. I use force landscape for videos through mx player, and mango reader for manga.
I finally broke down and took the phone apart. There were no warranty stickers to break so assuming you don't mess up royally, it shouldn't effect your resale value. All it took was an eye glass screw driver and a q-tip. Once I was inside I tried the can of air first, but didn't help. Swabbed the back of the glass with the q-tip and that finally provided lasting relief.
i9100 proximity sensor doesn't work
Hi to all!
I have the issue with proximity sensor and didn't manage to find a solution in other similar threads!
The matter is that it is always stay as Released.
In the same time in test screen (*#0*#) there are changing reading for PROXIMITY parameter from 2 up to 240 with no ADC parameter at all. Please look for screenshots. PROXIMITY parameter changes its value when I move my finger in front of the sensor, but as I can understand Android doesn't recognize it because of ADC absence.
Moreover I tried to change proximity sensor for working one (from another phone), but it shows the same as mine (with no ADC readings).
After all I think it is software problem, but I don't know how to solve it. I flashed different firmwares (now it is XWMSE NeatROM v.6.4), but nothing helped.
Please assist! Thanks!
khudko83 said:
Hi to all!
I have the issue with proximity sensor and didn't manage to find a solution in other similar threads!
The matter is that it is always stay as Released.
In the same time in test screen (*#0*#) there are changing reading for PROXIMITY parameter from 2 up to 240 with no ADC parameter at all. Please look for screenshots. PROXIMITY parameter changes its value when I move my finger in front of the sensor, but as I can understand Android doesn't recognize it because of ADC absence.
Moreover I tried to change proximity sensor for working one (from another phone), but it shows the same as mine (with no ADC readings).
After all I think it is software problem, but I don't know how to solve it. I flashed different firmwares (now it is XWMSE NeatROM v.6.4), but nothing helped.
Please assist! Thanks!
Click to expand...
Click to collapse
Changing the rom isn't going to do anything, even factory roms (I've tried it). If a replacement sensor doesn't fix it for you, then it's going to be hard to fix it yourself. All the posts I've seen so far have cleaned the sensor or replaced the sensor and fixed the problem. Otherwise people like me just turn the sensor off.
You were right, proximity software fix didn't help! But how is it possible to work in this (the same wrong) way with changed sensor? Can it be some main board hardware problem? But it doesn't look like this...
Sent from my GT-I9500 using XDA Premium 4 mobile app
Maybe somebody knows how to fix the issue???
Finally fixed
Thanks so much qman66 I have had problems with my proximity sensor on my JFLTEXX pretty much since I got it. Had been using the xposed disable proximity sensor module but xposed doesn't work with CM12. Your simple system tweak has given me use of my phone know call options again
qman66 said:
with root explorer go to system/lib/hw and go all the way to the bottom to the last sensors file. its an so file. long press on it and open in text editor. somewhere in the page almost at the bottom you will see where it says ProximitySensor then on one of those line it should say mEnabled. just rename it to mDisabled, then reboot and the proximity sensor is fixed.
Click to expand...
Click to collapse
Hi, I tied to do this but it says I can't save the changed so file... Can you let me know which root explorer and text editor you are using?
Thanks massively
Not a text file
qman66 said:
with root explorer go to system/lib/hw and go all the way to the bottom to the last sensors file. its an so file. long press on it and open in text editor. somewhere in the page almost at the bottom you will see where it says ProximitySensor then on one of those line it should say mEnabled. just rename it to mDisabled, then reboot and the proximity sensor is fixed.
Click to expand...
Click to collapse
I found sensors.msm8960.so with many references to proximity sensor but it is not a text file!!
Samsung S4 Active w LOS 15.1 (a&Droid 8.1) - how to disable HW sensor(s).
Hi All
Hope some here will help me stay afloat long enough to learn to surf by myself; bit of a noob in this wild ocean here (more of a 'fresh water/indoor pool' kinda dude I guess) - but trying to break out of tis little pond and learn to 'surf'. Anyway, to the point:
1. HW spec
Samsung Galaxy S4 Active
GT - i9295
TWRP 3.3.0-0
Lineage 15.1 20180227 jactivelte
(sometimes with opengapps pico and addonsu15.1 but mostly just LOS and addonsu nothing else)
2. Have the sensors on phone covered up with black electrical tape - all but the notification light are covered and it's gonna stay that way - NOT negotiable!
Obvious Issue: Have the blank screen during phone call problem. Can end calls using power button but I need to use the keypad quite often so need the screen to stay on. How? Ideally want to (SW) disable most if not all hardware sensors - how?
Tried a few fixes but no luck, e.g.:
(a) adding 'the' fix/control many sensors apk no good as not suported under 8.1 (plus want to find out how to do manually myself not use 'hand outs').
(b) edit selected sensor etc ".so" (eg in system hw) files - so far not resulting in the disabled ProximitySensor.
So, I really want to hack this myself at cmd line level, am ok with that (many years IT ops/admin experience in 'fresh water commercial space'). Can mount system using TWRP then adb shell to connect and find and grep for stuff in files but cannot find setttings I need to change to disable sensors for good. Where to look/find more info?
What do I want to achive:
Make calls and have keypad stay on all the time or give me manual option to turn screen on/off with a hw button during call.
How:
I am happy to disable pretty much all sensors (proximity, gyro, compass etc) in system or firmware memory so that I am free from the overlords and really want to be able to use the keypad during calls - and have option to manually turn screen off/on during call would be cool.
Constraint:
Really want to do this from (a) cmd line or (b) edit code/recompile (learning curve) the LOS 15.1 or whatever to disable sensors for good. I will be using this old thing mostly for just call and txt not much else - and cannot be asked to buy an old Nokia handset.
Thanks,
iHAL8999.999... (hi dave...)