FLASHING CUSTOM RECOVERY (CWM) FROM LGMDP
FOR LG P500 / OPTIMUS ONE ONLY
This method works for all unrooted p500/optimus one and p500/optimus one devices stuck in emergency mode.
DO THIS ON YOUR OWN RISK, I WILL HAVE NO LIABILITY IF YOU BRICK YOUR PHONE !!!
download lgmdp : Download here
download clockwork recovery (5.0.2.0): Download here
1. disable lg modem ( in device manager->modems)
2. now connect your phone to pc. (If phone not booting into rom connect in emergency mode, turn off phone and press (volup+return+power) buttons simultaneously)
3. start lgdmp
4. click "select port"
Phone will be automatically detected press "connect"
(close the pop up window of image select generally you will get it on connect of lgmdp)
5. backup nv for safety (tools->nv backup) {ignore this step when phone connected in emergency mode, i did ignore this and found no risk of loosing nv}
6. extract downloaded recovery into a new folder
7. select the extracted recovery folder as "image folder or select image" in lgmdp
(it gives some errors as other files are not present, donot worry as we are only flashing recovery those 2 files are enough, files "recovery" and "partiton" will be automatically checked and others gray out)
8. Close the selection window and press "download" (in main window of lgmdp)
DONOT DISCONNECT YOUR MOBILE UNTILL IT SHOWS DOWNLOAD COMPLETE AT BOTTOM
it shows in middle trying to connect to phone etc. donot touch the phone it will be automatically connect everytime.
AFTER DOWNLOAD COMPLETE your device should boot into recovery
1. switch off your device
2. pressing (home+vol down+power) buttons simultaneously should boot into recovery.
now install whichever rom you want and enjoy
Tested on O1 having baseband v10 and v20 also, from normal boot and emergency mode as well and it works.
mak.3736 said:
FOR LG P500 / OPTIMUS ONE ONLY
This method should work for all unrooted devices and p500/optimus one devices stuck in emergency mode.
This is tested on O1 having v10 baseband and it works.
SHOULD WORK FOR V20 as well
download lgmdp : http://www.mediafire.com/?ov799yg7vbnce9j
download cwm recovery : http://www.mediafire.com/?1lcjbfa3ypqbqj3
1. disable lg modem ( in device manager->modems)
2. now connect your phone to pc.(if phone not booting into rom connect in emergency mode (home+volup+return) button holding simultaneously)
3. start lgdmp
4. click "select port"
Phone will be automatically detected press "connect"
(close the pop up window of image select generally you will get it on connect of lgmdp)
5. backup nv for safety (tools->nv backup) {ignore this step while connecting phone in emergency mode, i did ignore this and found no risk of loosing nv}
6. extract downloaded recovery into a new folder
7. select the extracted recovery folder as "image folder or image select" in lgmdp
(it gives some errors donot worry, but files "recovery" and "partiton" will be automatically checked and others gray out)
8. press start or download
DONOT DISCONNECT YOUR MOBILE UNTILL IT SHOWS DOWNLOAD COMPLETE AT BOTTOM
AFTER DOWNLOAD COMPLETE your device should boot into recovery
1. switch off your device
2. pressing (home+vol down+power) buttons simultaneously should boot into recovery.
now install whichever rom you want and enjoy
TESTED ON v10 baseband LG O1 and it worked for me.
Click to expand...
Click to collapse
i need to try it once.thanks tho
phone is not detecting
no phone to connect.LGMDP-v1.5 is not detecting the phone.pls help...my full problem http://forum.xda-developers.com/showthread.php?p=19303459#post19303459
ojobinv said:
no phone to connect.LGMDP-v1.5 is not detecting the phone.pls help...my full problem http://forum.xda-developers.com/showthread.php?p=19303459#post19303459
Click to expand...
Click to collapse
reinstall drivers.
let your phone be on (stuck at lg logo), connect to computer, flash custom recovery from lgmdp.
There might errors occur at nv backup or nv restore but it will flash recovery.
my phone doesnt even starting in emergency mode.
1. disable lg modem ( in device manager->modems)
2. now connect your phone to pc. (If phone not booting into rom connect in emergency mode, turn off phone and press (home+volup+return) buttons simultaneously)
3. start lgdmp
4. click "select port"
Phone will be automatically detected press "connect"
(close the pop up window of image select generally you will get it on connect of lgmdp)
5. backup nv for safety (tools->nv backup) {ignore this step when phone connected in emergency mode, i did ignore this and found no risk of loosing nv}
6. extract downloaded recovery into a new folder
7. select the extracted recovery folder as "image folder or select image" in lgmdp
(it gives some errors as other files are not present, donot worry as we are only flashing recovery those 2 files are enough, files "recovery" and "partiton" will be automatically checked and others gray out)
8. press start or download
DONOT DISCONNECT YOUR MOBILE UNTILL IT SHOWS DOWNLOAD COMPLETE AT BOTTOM
AFTER DOWNLOAD COMPLETE your device should boot into recovery
1. switch off your device
2. pressing (home+vol down+power) buttons simultaneously should boot into recovery.
now install whichever rom you want and enjoy
Tested on O1 having baseband v10 and v20 also, from normal boot and emergency mode as well and it works.[/QUOTE]
hi
i tried to update firmware through kdz updater.
it erased the c drive but then due to some error my phone is not starting even in emergency mode.
i tried all possible combinations of hard keys.
luckily its under warranty.
but i dont know any convincing reason that the service center would accept.
plz help.
farzii said:
hi
i tried to update firmware through kdz updater.
it erased the c drive but then due to some error my phone is not starting even in emergency mode.
i tried all possible combinations of hard keys.
luckily its under warranty.
but i dont know any convincing reason that the service center would accept.
plz help.
Click to expand...
Click to collapse
Tell them you were updating phone through official lg tool software updater, the phone went to emergency mode during process, it shutdown and it didnt power on since then.
They wont ask a single question after this. All the best
(I did use the same explanation)
Heyy, so when I do this(note I am stuck in recovery mode on the phone), it says Error can't open serial port, reboot and restart. Every time I click download to put the recovery in it it does this.
MXFrodo195 said:
Heyy, so when I do this(note I am stuck in recovery mode on the phone), it says Error can't open serial port, reboot and restart. Every time I click download to put the recovery in it it does this.
Click to expand...
Click to collapse
i experienced same problem in one of my friends computer, but then it was solved when we tried again after fresh install of windows and drivers, better you try on any other computer, i m sure u will get it work.
mak.3736 said:
i experienced same problem in one of my friends computer, but then it was solved when we tried again after fresh install of windows and drivers, better you try on any other computer, i m sure u will get it work.
Click to expand...
Click to collapse
I tried from another computer, it's doing the same exact thing. Any other ideas?
Thats what happens when I click download, when I click Select Image, nothing is happening at all. In recovery should I be mounting anything?(data, sdcard, cache, system). Or should I be mounting the USB Storage? I am just baffled, I must be doing something simple wrong, as it seems pretty straightforward.
Hi,
Thank you for the informations.
after image file selected and started, error message was occured "Error! Partition table"
Plz help...
solenun said:
Hi,
Thank you for the informations.
after image file selected and started, error message was occured "Error! Partition table"
Plz help...
Click to expand...
Click to collapse
I think you are not selecting partion.mbn, download the recovery zip once again and follow below:
there are 2 files in zip, recovery image and other is partition.mbn.
Make sure both the files are selected and ticked while image select.
partition.mbn will be selected in partition table,
recovery.img will be selected in recovery image,
then close the window of image select and press download.
MXFrodo195 said:
I tried from another computer, it's doing the same exact thing. Any other ideas?
Thats what happens when I click download, when I click Select Image, nothing is happening at all. In recovery should I be mounting anything?(data, sdcard, cache, system). Or should I be mounting the USB Storage? I am just baffled, I must be doing something simple wrong, as it seems pretty straightforward.
Click to expand...
Click to collapse
uninstall other phone drivers (nokia , motorola etc.) from computer, reboot, reinstall lg p500 usb drivers, reboot and follow guide as the same.
mak.3736 said:
uninstall other phone drivers (nokia , motorola etc.) from computer, reboot, reinstall lg p500 usb drivers, reboot and follow guide as the same.
Click to expand...
Click to collapse
Don't forget to disable the LGE virtuial modem with tools in the LGDMP after it "sees" the phone(leaving the other LGE modem active) (that is the LGDMP)Also after the disable cmd do not restart your computer(mine suggestes this after).Select your image zip the p500 partition table is included there.You will get about 4 or 5 error windows just ok click them away (ignore) and run download.It takes a short time and then pauses a min. and continues.DO NOT disconnect or stop/cancell anything untill you get a red DOWNLOAD COMPLETE!..I used this a couple of times and feel it a very safe way to flash
is it possible to flash amon ra recovery via LGMDP.exe?
if so, how?
vivithbharath said:
is it possible to flash amon ra recovery via LGMDP.exe?
if so, how?
Click to expand...
Click to collapse
yes , but i didnt test it.
try it by replacing clockwork's recovery.img with amonra's revovey.img in folder u get after extracting the zip of clockwork provided in thread.
(i mean use partition.mbn from clockwork zip in thread and amonra recovery.img and flash with lgmdp)
mak.3736 said:
yes , but i didnt test it.
try it by replacing clockwork's recovery.img with amonra's revovey.img in folder u get after extracting the zip of clockwork provided in thread.
(i mean use partition.mbn from clockwork zip in thread and amonra recovery.img and flash with lgmdp)
Click to expand...
Click to collapse
thanks! will try and post the results
My start button is greyed out, clicking it is useless.
Edit: after selecting the file, I closed the window and clicked download. After backing up my NV, the flash worked.
jasonwsc said:
My start button is greyed out, clicking it is useless.
Edit: after selecting the file, I closed the window and clicked download. After backing up my NV, the flash worked.
Click to expand...
Click to collapse
yes i mentioned in procedure press "start" or "download", its obvious start button will be grayed out as all files are not selected. so close file select window and press "download" in main window..
............
I have added it in steps as well now
Why is it that after I selected the port, the select image button is not doing anything? it's clickable but it does nothing?
bryanposas said:
Why is it that after I selected the port, the select image button is not doing anything? it's clickable but it does nothing?
Click to expand...
Click to collapse
After selecting port , a window will pop up to browse for "image folder" close this poped up window then all the functions of main window of lgmdp will be accesible
Related
i try flash romania 2.3.3 to my indian 2.2.2 intialy it creat boot loop just go only up to android logo ramain as it is phone not start.so i then flash v10b to start phone again .then i again try to flash romania 2.3.3 but error code 500 come in kdz updater .so i try all three mode in kdz updater .but errr code 1002,500,2 like 2-3 type of error occur in kdz updater.phone in emergency mode with yellow screen.then i remove bettery try to again access bootloader mode .but i saw that phone is completely dead .not getting emergecy mode no white light on pressing key menu .charger not working, kdz say phone not connected .lgmdp.exe cant find phone . service center say u have to change your pcb circuit.is any way i able to detect my phone in my pc win 7
drbhavesh said:
i try flash romania 2.3.3 to my indian 2.2.2 intialy it creat boot loop just go only up to android logo ramain as it is phone not start.so i then flash v10b to start phone again .then i again try to flash romania 2.3.3 but error code 500 come in kdz updater .so i try all three mode in kdz updater .but errr code 1002,500,2 like 2-3 type of error occur in kdz updater.phone in emergency mode with yellow screen.then i remove bettery try to again access bootloader mode .but i saw that phone is completely dead .not getting emergecy mode no white light on pressing key menu .charger not working, kdz say phone not connected .lgmdp.exe cant find phone . service center say u have to change your pcb circuit.is any way i able to detect my phone in my pc win 7
Click to expand...
Click to collapse
man u already made ur phone suffered badly
try to take off battery fr some time and than follow error guide if that helps ,when it was stuck at lg logo u just need to switch off and press 3 combo button volup+home+power that would have solved it and loaded the rom
http://forum.xda-developers.com/showthread.php?t=1038338
http://forum.xda-developers.com/showthread.php?t=883314
chk both threads disabling modem and other precaution that needs to be taken to boot suceesfully
no key combo work .give me link of error guide
no lg logo also i also try by removing battery no help
drbhavesh said:
i try flash romania 2.3.3 to my indian 2.2.2 intialy it creat boot loop just go only up to android logo ramain as it is phone not start.so i then flash v10b to start phone again .then i again try to flash romania 2.3.3 but error code 500 come in kdz updater .so i try all three mode in kdz updater .but errr code 1002,500,2 like 2-3 type of error occur in kdz updater.phone in emergency mode with yellow screen.then i remove bettery try to again access bootloader mode .but i saw that phone is completely dead .not getting emergecy mode no white light on pressing key menu .charger not working, kdz say phone not connected .lgmdp.exe cant find phone . service center say u have to change your pcb circuit.is any way i able to detect my phone in my pc win 7
Click to expand...
Click to collapse
oh oh oh man what have u done? this is why i alwayes stayes away from kdz.
RUN PROGRAMME AS ADMINISTRATOR ONLY. SWITCH OFF ALL ANTIVIRUS, FIREWALL SOFTS.
try this...http://forum.xda-developers.com/showpost.php?p=15122833&postcount=100
if ur successfull ur phone may get the fastboot option on.then install a recovery by following this
1. Install android SDK from Google.
2. Connect the phone while it is on fastboot.
3. If your windows does not find the fastboot drivers online, use the drivers in this link:
http://www.megaupload.com/?d=39ZR16W1
4. extract the .zip file that you copied to your SD. The one that contains the recovery.
5. Copy the recover.img (or whatever the name of the .img file in the .zip file) to the folder inside the android sdk where fastboot.exe is located (I think its the tools folder)
6. Copy the adbwinapi.dll file from the android SDK\platform-tools\ to the folder containing fastboot.
7. issue the command (and replace recovery.img with the .img file name you have):
fastboot flash recovery recovery.img
fastboot reboot
i ll pray for ur phone
i not able to detect my phone in lg 3g mobile download program what can i do
drbhavesh said:
i not able to detect my phone in lg 3g mobile download program what can i do
Click to expand...
Click to collapse
try this http://forum.xda-developers.com/showthread.php?t=883314
disable the LG Modem driver
also try
Recovery Phone" from the LGMobile Update app. It's under the "Customer Support" menu. Enter IMEI or S/N and see if it can bring it up to life.
EDIT
( Make sure you use USB ports that are in back of youre PC, dont use front ones.
Disable LGE Virtual Modem. In your Windows operating system, go to Control Panel > System > Hardware > Device Manager > Modems > Right click on LGE Virtual Modem and click Disable.
Try to reflash your phone again, using normal way. You can check How in topic marked as 1.
How to repair your device if it feels like dead. When you click power button nothing happens (Note that this may not work, its only a theory)
Make sure you use USB ports that are in back of youre PC, dont use front ones.
Disable LGE Virtual Modem. In your Windows operating system, go to Control Panel > System > Hardware > Device Manager > Modems > Right click on LGE Virtual Modem and click Disable.
Try to boot your phone into Emergency/Download mode (VOL DOWN + POWER).
If the phone booted into Emergency/Download mode, launch KDZ Updater.
In TYPE dropdown menu, choose EMERGENCY.
Load KDZ(ROM) and flash your phone.
If the phone failed to boot into Emergency/Download mode (VOL DOWN + POWER), launch KDZ Updater.
In TYPE dropdown menu, choose CS_EMERGENCY.
Load KDZ(ROM) and flash your phone.
At the end of the process :-
1) Disconnect the USB cable from the phone
2) Press the three button combo i.e volume up + home + power button(This will hard reset your phone which is strongly recommended when you use KDZ
else this will cause a bootloop)
If the phone still dont work, take your phone to local LG Waranty service or your Operator which sold you the phone. Tell them that after you turned the phone off, it dosnt seem to turn back on again. And also make some angry face, something like this: >:[ so the girls that work there would be scared and respect you.)
drbhavesh said:
i not able to detect my phone in lg 3g mobile download program what can i do
Click to expand...
Click to collapse
You already made experiments with ur phone..u mst hv asked before trying too many times nd playing with the life of ur phone..Now suffer the loss
Somyab said:
Now suffer the loss
Click to expand...
Click to collapse
lol so mean
if u have warranty take it to LG service they will fix it and if u dont have warranty take it to any service and ask for a JTAG
I take to lg and my phone is under warranty they change my board and now it is working.but doing software update by kdz how it dead my phone .kdz is horrible and it is say phone not connected
Sent from my LG-P500 using XDA Premium App
Oh , i see your Problem : Your Phone is Dead
You can't enter the "Fastboot mode" , Your phone screen is black.
You can't do anything to fix this , just go to LG , and they will change ALL Things inside your phone ( A.K.A your Phone MAIN )
P.S : I don't SPAM , it's Real
PP.S : Don't Flash V20G with KDZ , AGAIN
josinpaul said:
try this http://forum.xda-developers.com/showthread.php?t=883314
disable the LG Modem driver
also try
Recovery Phone" from the LGMobile Update app. It's under the "Customer Support" menu. Enter IMEI or S/N and see if it can bring it up to life.
EDIT
( Make sure you use USB ports that are in back of youre PC, dont use front ones.
Disable LGE Virtual Modem. In your Windows operating system, go to Control Panel > System > Hardware > Device Manager > Modems > Right click on LGE Virtual Modem and click Disable.
Try to reflash your phone again, using normal way. You can check How in topic marked as 1.
How to repair your device if it feels like dead. When you click power button nothing happens (Note that this may not work, its only a theory)
Make sure you use USB ports that are in back of youre PC, dont use front ones.
Disable LGE Virtual Modem. In your Windows operating system, go to Control Panel > System > Hardware > Device Manager > Modems > Right click on LGE Virtual Modem and click Disable.
Try to boot your phone into Emergency/Download mode (VOL DOWN + POWER).
If the phone booted into Emergency/Download mode, launch KDZ Updater.
In TYPE dropdown menu, choose EMERGENCY.
Load KDZ(ROM) and flash your phone.
If the phone failed to boot into Emergency/Download mode (VOL DOWN + POWER), launch KDZ Updater.
In TYPE dropdown menu, choose CS_EMERGENCY.
Load KDZ(ROM) and flash your phone.
At the end of the process :-
1) Disconnect the USB cable from the phone
2) Press the three button combo i.e volume up + home + power button(This will hard reset your phone which is strongly recommended when you use KDZ
else this will cause a bootloop)
If the phone still dont work, take your phone to local LG Waranty service or your Operator which sold you the phone. Tell them that after you turned the phone off, it dosnt seem to turn back on again. And also make some angry face, something like this: >:[ so the girls that work there would be scared and respect you.)
Click to expand...
Click to collapse
Buddy ! Nothing Works , Today Got My Main Board Replaced By LG !!
i flashed clockworkmod recovery from rom manager and then tried to boot in recovery but the p500 stuck on lg logo.
i tried to remove battery and then placing again but it wasn't starting.
pls help me i think my phone is brick or something like that
can you try what you find here: http://androidforums.com/getitnowmarketing/330813-all-one-recovery-thread.html
I've experienced the same thing long back, it happens when recovery gets damaged...don't worry, the phone is not bricked...I recovered it by flashing back official firmware by using KDZ...
I'm assuming, u r not able to go to recovery either...r u?
yes i'm not able to go to recovery
to use kdz, pc is required but, when i tried to connect the phone to pc using usb cable it wasn't regonised. what to do
dmayurx said:
yes i'm not able to go to recovery
to use kdz, pc is required but, when i tried to connect the phone to pc using usb cable it wasn't regonised. what to do
Click to expand...
Click to collapse
Try the 8th point mentioned in the post...
Code:
http://forum.xda-developers.com/showthread.php?t=883314
dmayurx said:
i flashed clockworkmod recovery from rom manager and then tried to boot in recovery but the p500 stuck on lg logo.
i tried to remove battery and then placing again but it wasn't starting.
pls help me i think my phone is brick or something like that
Click to expand...
Click to collapse
well lgmdp is the best and the safest method to get ur phn back to life http://forum.xda-developers.com/showthread.php?t=1324105
folow this to flash recovery http://forum.xda-developers.com/showthread.php?t=1318750 just be sure to enable usb debugging on phn before flashing any recovery via clockwork or even lgmdp
shhbz said:
well lgmdp is the best and the safest method to get ur phn back to life http://forum.xda-developers.com/showthread.php?t=1324105
folow this to flash recovery http://forum.xda-developers.com/showthread.php?t=1318750 just be sure to enable usb debugging on phn before flashing any recovery via clockwork or even lgmdp
Click to expand...
Click to collapse
My phone is stuck on LG logo. that means my android isn't booting. so, my point is how can i turn ON USB Debugging.
and the other thing is i installed my phone drivers to pc(win 7 32 bit) but my phone was not recognized so, how can I use the tools like KDZ updater or LGMDP.
Thanks for the reply dude
dmayurx said:
My phone is stuck on LG logo. that means my android isn't booting. so, my point is how can i turn ON USB Debugging.
and the other thing is i installed my phone drivers to pc(win 7 32 bit) but my phone was not recognized so, how can I use the tools like KDZ updater or LGMDP.
Thanks for the reply dude
Click to expand...
Click to collapse
u can use kdz with the emergency mode...nothing to do with the USB debugging...the problem is the phone is not recognized...try many times with the "shaking technique"...it will work for sure, it worked for me...
dmayurx said:
My phone is stuck on LG logo. that means my android isn't booting. so, my point is how can i turn ON USB Debugging.
and the other thing is i installed my phone drivers to pc(win 7 32 bit) but my phone was not recognized so, how can I use the tools like KDZ updater or LGMDP.
Thanks for the reply dude
Click to expand...
Click to collapse
well i am saying that be sure to enable usb debugging in future for the time just use the method to revive your phn back ,when ur phn is on just be sure usb debugging is enabled and than flash recovery using any method u r comfortable with, use the lgmdp method its safe and kdz flashing is used the shaking method when the phn is in dead condition as ur phn boot to lg logo so the lgmdp method will work even the kdz but the later one is bit risky.
Get lgdmp (firmware flasher) on PC
Link: http://*******/5v3zU
Open lgdmp.exe
Disable LG modem
Device manager -> modems
Go to emergency mode first.
For that:
Power off phone (even if by taking out battery) -> keep press volume up+back button and press power button.
Now u will enter emergency mode
In lgdmp click select port
Phone will be detected automatically -> press connect
Close the pop-up window that shows to select image file
Backup NV
Tools -> NV backup
Download recovery
Link: http://*******/5v3tT
Unzip the downloaded recovery into a folder
Open the extracted folder as the image folder in lgdmp
It will show some errors. Don't mind and just close the image selection window
Now press download in main window of lgdmp
It will flash recovery to the phone
After its complete u can boot to recovery by keycombination menu + volume down when pressing power button
Hope it will help
Edit: xda don't allow adfly links so download files from http://lg-p500-optimusone.blogspot.in/p/flashing-custom-recovery-cwm-from-lgmdp.html
Sent from my LG-P500 using XDA
God! What the hell are you doing!
Do you even know what happened to your phone; No!
So don't go for anything
You got your CWM 5.0.2.7 corrupted while flash
So just boot into fastboot mode and flash CWM 5.0.2.0 via fastboot method
@All here: If anyone of you, could please link him to fastboot unbrick method from Bytecode's repo
By the way. What ever you try but KDZ and LGPMD won't recogonise your phone
So no chance to use it
Most probably he will be confused like hell by seeing all those answers like
Go for lgmdp no go to kdz no phone bricked ma money oh GOD.. :banghead:
Am not spamming by the way lol........
doppelgänger said:
Get lgdmp (firmware flasher) on PC
Link: http://*******/5v3zU
Open lgdmp.exe
Disable LG modem
Device manager -> modems
Go to emergency mode first.
For that:
Power off phone (even if by taking out battery) -> keep press volume up+back button and press power button.
Now u will enter emergency mode
In lgdmp click select port
Phone will be detected automatically -> press connect
Close the pop-up window that shows to select image file
Backup NV
Tools -> NV backup
Download recovery
Link: http://*******/5v3tT
Unzip the downloaded recovery into a folder
Open the extracted folder as the image folder in lgdmp
It will show some errors. Don't mind and just close the image selection window
Now press download in main window of lgdmp
It will flash recovery to the phone
After its complete u can boot to recovery by keycombination menu + volume down when pressing power button
Hope it will help
Edit: xda don't allow adfly links so download files from http://lg-p500-optimusone.blogspot.in/p/flashing-custom-recovery-cwm-from-lgmdp.html
Sent from my LG-P500 using XDA
Click to expand...
Click to collapse
still phone stucks on lg logo.
nothing happens when I press the Vol up + return button.
i tried without emergency mode but it won't help
DJoptimus-One said:
God! What the hell are you doing!
Do you even know what happened to your phone; No!
So don't go for anything
You got your CWM 5.0.2.7 corrupted while flash
So just boot into fastboot mode and flash CWM 5.0.2.0 via fastboot method
@All here: If anyone of you, could please link him to fastboot unbrick method from Bytecode's repo
Click to expand...
Click to collapse
Is this what ur talking about i found this
http://forum.xda-developers.com/showthread.php?t=1088046
it isn't from bytecode(u may know this)
no following codes were shown on my screen
Symptom
You tried flashing a custom recovery like ClockWorkMod or Thunderg, or you flashed an incorrect ROM, and when you rebooted, it showed this screen:
Code:
fastboot mode started
udc_start()
DJoptimus-One said:
God! What the hell are you doing!
Do you even know what happened to your phone; No!
So don't go for anything
You got your CWM 5.0.2.7 corrupted while flash
So just boot into fastboot mode and flash CWM 5.0.2.0 via fastboot method
@All here: If anyone of you, could please link him to fastboot unbrick method from Bytecode's repo
Click to expand...
Click to collapse
I found this too a "FastBoot Tutorial"
http://forum.xda-developers.com/showpost.php?p=15122833&postcount=100
after select port nothing appears in new window
dmayurx said:
Is this what ur talking about i found this
http://forum.xda-developers.com/showthread.php?t=1088046
it isn't from bytecode(u may know this)
no following codes were shown on my screen
Symptom
You tried flashing a custom recovery like ClockWorkMod or Thunderg, or you flashed an incorrect ROM, and when you rebooted, it showed this screen:
Code:
fastboot mode started
udc_start()
Click to expand...
Click to collapse
Completely switch off your phone
Press Power + Home button
It will boot into fastboot mode and then just follow the method as shown on the thread (link that you mentioned)
Make sure to download 5.0.2.0 CWM recovery image from here
Two things that i wanna advise you about
1) Read that thread very carefully, understand what you are doing and follow each and every command.
2) Make sure to rename the download *.img file to recovery.img
Note that .img is the extension and not to be included in name
I'm sure this will help
Once done, type in fastboot reboot and wait for the phone to boot to the previous instance, where the phone was before this happened
Avoid using 5.0.2.7; its buggy
dmayurx said:
I found this too a "FastBoot Tutorial"
http://forum.xda-developers.com/showpost.php?p=15122833&postcount=100
after select port nothing appears in new window
Click to expand...
Click to collapse
Don't use this. Use the previous link you mentioned
DJoptimus-One said:
By the way. What ever you try but KDZ and LGPMD won't recogonise your phone
So no chance to use it
Click to expand...
Click to collapse
The same thing happened with my phone too, but I was able to revive it by kdz, flashing back stock froyo...and carried out the entire step again...anyway thanks for mentioning a faster technique...may come handy in future
kiran2cy said:
The same thing happened with my phone too, but I was able to revive it by kdz, flashing back stock froyo...and carried out the entire step again...anyway thanks for mentioning a faster technique...may come handy in future
Click to expand...
Click to collapse
Nice to hear that it helped others out too
I suffered from this about 20 times but it took me 2 minutes to recover back
i Was on JB V20A and i installed the root and the CWM and try to put cwm. to check if bootloader was still locked well it does.
and now im stock on L9 Security error.
i can enter on S/W and tryin using the "UpTestEX_mod2_marwin" the Window enabler and the Http.exe to flash it but.
i try phone mode CS_emergency and emergency but when it start to check the phone it stuck on 15% and i can turn on the phone (thats the way i used to bypass the 15% and get with the instalation)
so what now? i can enter on S/W and Recovery Mode LG (This mode is for data backip at service center. after reboting press power key to keep using phone), still can do hard reset pressing volumen less home and power but nothing happen keep with the error.
i know while the phone turn on there's a solution.
my phone is L9 p768g
just don't view the post and ignore. :/
TY for all the view and the 900000 helps. nvm i solved ty to my fb L9 friends so... jodan
Jctatis said:
TY for all the view and the 900000 helps. nvm i solved ty to my fb L9 friends so... jodan
Click to expand...
Click to collapse
I have the same situation, may I know what your solution is?
twinwoods said:
I have the same situation, may I know what your solution is?
Click to expand...
Click to collapse
This case is very simple to solve. When you try to install a custom recovery with your bootloader locked, the phone system detects it and give you a message of an error in security, like in your case. To solve this, you'll need to reflash your rom. By doing this, the KDZ will reflash the original recovery and you will be able to access your phone/recovery again.
Step by step:
1. You need to install fastboot drivers: http://forum.xda-developers.com/showthread.php?t=2119090
Turn off the phone and remove the battery. Download THIS and exctract it to C:/. Open device manager in windows (Rigt click on Computer > Manage > Device manager) and connect your phone without the battery to pc via USB cable. Look in device manager for a new hardware connected, right click on it and click in update drivers. In the window open, select "Search for software driver in the computer" and in the window open select insert C:\fastboot\usb_drv_windows, tick the option "include subfolders" and advance. A pop up window may appear asking you if you do want to install the driver, choose YES and the drivers will install.
2. Navigate to the folder you extracted (C:/fastboot) and double click on start.bat. It will ask you for administrator privileges, just say yes.
3. Select your phone model (2 for P760, 3 for P765, 4 for P768 and 5 for P769). It will ask you to turn off your phone and remove battery. When you done with that, press enter. It will now ask you to insert USB cable with the phone without the battery and after 4 seconds re-insert the battery. Onde you done with that, it wil return a message to press any key. In this step the fastboot drivers may be installed again. Don't worry, it's normal
4. Remove the battery again, wait a few seconds and re-insert it.
5. Plug the USB cable in the phone with the battery in and let VOL UP pressed. The phone will enter in SW Update mode.
6. Follow THIS to reflash your rom. A list of avaiable official roms of different models is HERE. Remember to only flash roms made for your phone model or you may get some issues.
7. You're all done I recommend using THIS TWEAK, the phone becomes more responsive.
*** If you flashed a JellyBean rom (V20X.kdz) you can easily root with THIS and if you want CWM recovery use THIS ONE ------ REMEMBER NOT TO FLASH ANY CUSTOM ROM WITH THIS RECOVERY BECAUSE I'M CONSIDERING YOUR BOOTLOADER IS LOCKED AND FOR THIS REASON, YOU CANNOT FLASH CUSTOM ROMS WITH CWM, IT JUST DOESNT WORK!!!
Hope it help you
It works!!
shucrut said:
This case is very simple to solve. When you try to install a custom recovery with your bootloader locked, the phone system detects it and give you a message of an error in security, like in your case. To solve this, you'll need to reflash your rom. By doing this, the KDZ will reflash the original recovery and you will be able to access your phone/recovery again.
Step by step:
1. You need to install fastboot drivers:
Turn off the phone and remove the battery. Download THIS and exctract it to C:/. Open device manager in windows (Rigt click on Computer > Manage > Device manager) and connect your phone without the battery to pc via USB cable. Look in device manager for a new hardware connected, right click on it and click in update drivers. In the window open, select "Search for software driver in the computer" and in the window open select insert C:\fastboot\usb_drv_windows, tick the option "include subfolders" and advance. A pop up window may appear asking you if you do want to install the driver, choose YES and the drivers will install.
2. Navigate to the folder you extracted (C:/fastboot) and double click on start.bat. It will ask you for administrator privileges, just say yes.
3. Select your phone model (2 for P760, 3 for P765, 4 for P768 and 5 for P769). It will ask you to turn off your phone and remove battery. When you done with that, press enter. It will now ask you to insert USB cable with the phone without the battery and after 4 seconds re-insert the battery. Onde you done with that, it wil return a message to press any key. In this step the fastboot drivers may be installed again. Don't worry, it's normal
4. Remove the battery again, wait a few seconds and re-insert it.
5. Plug the USB cable in the phone with the battery in and let VOL UP pressed. The phone will enter in SW Update mode.
6. Follow THIS to reflash your rom. A list of avaiable official roms of different models is HERE Remember to only flash roms made for your phone model or you may get some issues.
7. You're all done I recommend using THIS TWEAK , the phone becomes more responsive.
*** If you flashed a JellyBean rom (V20X.kdz) you can easily root with THIS and if you want CWM recovery use THIS ONE ------ REMEMBER NOT TO FLASH ANY CUSTOM ROM WITH THIS RECOVERY BECAUSE I'M CONSIDERING YOUR BOOTLOADER IS LOCKED AND FOR THIS REASON, YOU CANNOT FLASH CUSTOM ROMS WITH CWM, IT JUST DOESNT WORK!!!
Hope it help you
Click to expand...
Click to collapse
Thank you so much. Yes my P769 BOOTLOADER definitely is locked and I can't even root it with all methods provided in xda, I use exactly your method to get my L9 back to life -- although I have to flash it back to original stock but at least it's BACK! Thank you so much. I saw some other people have the same issue but they can't make it work, hopefully your answer shed the light to ALL!
security error just use the lg pc suite and remove the lines or the host put recover via recovery and put your imei and it will start to download the stock Rom
send from cursed G-P768g 4.1.2. Panamà
grupo Facebook L9 latino América: https://m.facebook.com/groups/54638...ity&actorid=1381295152&__user=100001612362905
Thank you soo much!!! you seriously saved me.
shucrut said:
This case is very simple to solve. When you try to install a custom recovery with your bootloader locked, the phone system detects it and give you a message of an error in security, like in your case. To solve this, you'll need to reflash your rom. By doing this, the KDZ will reflash the original recovery and you will be able to access your phone/recovery again.
Step by step:
1. You need to install fastboot drivers: http://forum.xda-developers.com/showthread.php?t=2119090
Turn off the phone and remove the battery. Download THIS and exctract it to C:/. Open device manager in windows (Rigt click on Computer > Manage > Device manager) and connect your phone without the battery to pc via USB cable. Look in device manager for a new hardware connected, right click on it and click in update drivers. In the window open, select "Search for software driver in the computer" and in the window open select insert C:\fastboot\usb_drv_windows, tick the option "include subfolders" and advance. A pop up window may appear asking you if you do want to install the driver, choose YES and the drivers will install.
2. Navigate to the folder you extracted (C:/fastboot) and double click on start.bat. It will ask you for administrator privileges, just say yes.
3. Select your phone model (2 for P760, 3 for P765, 4 for P768 and 5 for P769). It will ask you to turn off your phone and remove battery. When you done with that, press enter. It will now ask you to insert USB cable with the phone without the battery and after 4 seconds re-insert the battery. Onde you done with that, it wil return a message to press any key. In this step the fastboot drivers may be installed again. Don't worry, it's normal
4. Remove the battery again, wait a few seconds and re-insert it.
5. Plug the USB cable in the phone with the battery in and let VOL UP pressed. The phone will enter in SW Update mode.
6. Follow THIS to reflash your rom. A list of avaiable official roms of different models is HERE. Remember to only flash roms made for your phone model or you may get some issues.
7. You're all done I recommend using THIS TWEAK, the phone becomes more responsive.
*** If you flashed a JellyBean rom (V20X.kdz) you can easily root with THIS and if you want CWM recovery use THIS ONE ------ REMEMBER NOT TO FLASH ANY CUSTOM ROM WITH THIS RECOVERY BECAUSE I'M CONSIDERING YOUR BOOTLOADER IS LOCKED AND FOR THIS REASON, YOU CANNOT FLASH CUSTOM ROMS WITH CWM, IT JUST DOESNT WORK!!!
Hope it help you
Click to expand...
Click to collapse
I tried this method and the offline kdz method and here is the trouble I am having.
1. With this method I do everything perfect the device shows up for a couple seconds then it disappears so I cannot go any further.
2. With the offline fix I followed the OP to the letter and when I get to the part where I click on "normal web upgrade" I open it and start the upgrade as stated in the OP and nothing. I get the retry or cancel internet warning and ignore or close it and it will not even try pushing the file.
Anyway I have tried 2 different machines to no avail I am wondering if anyone has had a similar problem and fixed it?
Sent from my GT-I9505G using Tapatalk 2
Didn't work for me! But I tried another method and that saved me from a lot of steps.
Just install the driver and the latest LGMobile Support Tool
Start your phone in Software upgrade mode... Power + Vol up
In the LGMobile Support Tool click on Options and then Upgrade Recovery
Put your IMEI in the option that pops up
Wait for the miracle!
It worked for me ... NO MORE LG SECURITY ERROR
MJHawaii said:
I tried this method and the offline kdz method and here is the trouble I am having.
1. With this method I do everything perfect the device shows up for a couple seconds then it disappears so I cannot go any further.
2. With the offline fix I followed the OP to the letter and when I get to the part where I click on "normal web upgrade" I open it and start the upgrade as stated in the OP and nothing. I get the retry or cancel internet warning and ignore or close it and it will not even try pushing the file.
Anyway I have tried 2 different machines to no avail I am wondering if anyone has had a similar problem and fixed it?
Sent from my GT-I9505G using Tapatalk 2
Click to expand...
Click to collapse
Fixed my phone too. I removed lookout permanently and my phone stopped functioning, so I did the method u said and worked great, I got scared but it worked. Lookout is installed again, I can root again and uproot if I want, it works great again. I recommend this method to all
Sent from my LG-P769 using xda app-developers app
it worked! thanks!
the easiest!!
Owadel said:
Didn't work for me! But I tried another method and that saved me from a lot of steps.
Just install the driver and the latest LGMobile Support Tool
Start your phone in Software upgrade mode... Power + Vol up
In the LGMobile Support Tool click on Options and then Upgrade Recovery
Put your IMEI in the option that pops up
Wait for the miracle!
It worked for me ... NO MORE LG SECURITY ERROR
Click to expand...
Click to collapse
i think this is the easiest method to get back to your "last working condition".. i mean nothng got deleted, nothng chnged.. i'm happy to get rid of the "security error" condition!! thanks a lot
shucrut said:
This case is very simple to solve. When you try to install a custom recovery with your bootloader locked, the phone system detects it and give you a message of an error in security, like in your case. To solve this, you'll need to reflash your rom. By doing this, the KDZ will reflash the original recovery and you will be able to access your phone/recovery again.
Step by step:
1. You need to install fastboot drivers: http://forum.xda-developers.com/showthread.php?t=2119090
Turn off the phone and remove the battery. Download THIS and exctract it to C:/. Open device manager in windows (Rigt click on Computer > Manage > Device manager) and connect your phone without the battery to pc via USB cable. Look in device manager for a new hardware connected, right click on it and click in update drivers. In the window open, select "Search for software driver in the computer" and in the window open select insert C:\fastboot\usb_drv_windows, tick the option "include subfolders" and advance. A pop up window may appear asking you if you do want to install the driver, choose YES and the drivers will install.
2. Navigate to the folder you extracted (C:/fastboot) and double click on start.bat. It will ask you for administrator privileges, just say yes.
3. Select your phone model (2 for P760, 3 for P765, 4 for P768 and 5 for P769). It will ask you to turn off your phone and remove battery. When you done with that, press enter. It will now ask you to insert USB cable with the phone without the battery and after 4 seconds re-insert the battery. Onde you done with that, it wil return a message to press any key. In this step the fastboot drivers may be installed again. Don't worry, it's normal
4. Remove the battery again, wait a few seconds and re-insert it.
5. Plug the USB cable in the phone with the battery in and let VOL UP pressed. The phone will enter in SW Update mode.
6. Follow THIS to reflash your rom. A list of avaiable official roms of different models is HERE. Remember to only flash roms made for your phone model or you may get some issues.
7. You're all done I recommend using THIS TWEAK, the phone becomes more responsive.
*** If you flashed a JellyBean rom (V20X.kdz) you can easily root with THIS and if you want CWM recovery use THIS ONE ------ REMEMBER NOT TO FLASH ANY CUSTOM ROM WITH THIS RECOVERY BECAUSE I'M CONSIDERING YOUR BOOTLOADER IS LOCKED AND FOR THIS REASON, YOU CANNOT FLASH CUSTOM ROMS WITH CWM, IT JUST DOESNT WORK!!!
Hope it help you
Click to expand...
Click to collapse
cant install fastboot drivers windows 10
This is now DEPRECATED and NOT SUPPORTED ANYMORE since there is an easier method to do it! Links won't get updated! You can still use the written info!
If you want rooted kitkat head to my friend's thread @maxx_hr (THANK YOU FOR ALL YOUR WORK!) HERE: http://forum.xda-developers.com/optimus-l3-l5-l7-l9-ii/development/kk-kk-kdz-p710-root-t2950532
Hello to you all!Warning:
Code:
[COLOR="Red"][SIZE="4"]Your warranty is now void. I am not responsible for bricked devices, dead SD cards,
thermonuclear war, or you getting fired because the alarm app failed.
Please do some research if you have any concerns about all contained in this tutorial
before you follow it! YOU are choosing to make these modifications, and if
you point the finger at me for messing up your device, I will laugh at you.
But since i'm a nice dude i will try to guide you anyway:)[/SIZE][/COLOR]
In this tutorial we will learn how to:
- achieve root on our L7 II (Both single and dual-sim, so P715/P710 and all the derivated phones from them) by LG running a Custom Rom or Stock KK Rom.
FOR THIS FOLLOW ALL STEPS.
- unbrick/flash to a specific firmware using Lg Flash Tool (In this tutorial there are only 2 KDZ files stock JB for P710 and P715. If you want to recover from a brick or want a different KDZ file you can find them over here: http://lg-phone-firmware.com/)
FOR THIS FOLLOW STEP 1 AND STEP 2 (install all drivers including adb and download the files that are needed at Step 2).
- flash with CWM (There are 3 methods I describe. Use the one that suits you the best. You can flash any *.zip that is suitable for your device.)
FOR THIS FOLLOW STEP 5.
Save your data you need, you will lose all data so backup with Titanium Backup or a program you like the info you need.
ALL DOWNLOADS ARE AT THE BOTTOM OF THE POST!
This tutorial will be split in steps as the following:
1. Preparing the Windows machine with the right drivers and software.
2. Reverting back to Jellybean Stock Rom.
3. Rooting on Stock Rom (Jellybean).
4. Installing Unlocked Bootloader and ClockWorkMod Recovery (CWM).
5. Flashing KitKat or a Custom Rom through CWM.
6. Flashing Root through CWM.
So let's start the job.
1. Preparing the Windows machine with the right drivers and software.
Uninstall everything related to LG from Control Panel (Drivers, PC Sync etc).
Restart your PC.
Download and unrar the archive "LG Drivers.rar".
Install both files inside and restart your computer.
Download "adb-setup-1.4.2.exe" and install it (answers should be y y y and install the drivers when prompted).
Download "Framaroot-1.9.1.apk".
Download "LG Flash Tool 2014.rar".
Download "Free LG P710.rar"
Download "P710 Stock KK.zip". -> Stock KK image with Stock KK kernel in it made from the original V20 KDZ (Open Europe).
Download SuperSU
*Download "P715 Stock KK.zip" and "LG P715 (JellyBean).kdz" if you are running a dual-sim version of the phone.
*Download all the files you need!
From now on I will consider you have this files and I will just call their names when to use them.
2. Reverting back to Jellybean Stock Rom.
Open the back cover of your phone and pull the battery out. Wait about 10 seconds. Put the battery back in.
While HOLDING (keep pressed) the VOLUME DOWN BUTTON insert the USB Cable in the phone (you need to have your USB cable inserted in an USB 2 port from the back of your PC).
When you see the yellow screen with emergency mode stop pressing the button.
Unplug the USB from the phone and then plug it in again.
Unrar "LG Flash Tool 2014.rar" and open "LGFlashTool2014.exe" with right-click Run As Admin.
*If you cannot open this program you need to install "VC_RedistInstaller.exe". You are missing some libraries of visual C++*
*IF YOU HAVE ANOTHER PHONE (another LG or P715) DO THE SAME INSTRUCTION AND REPLACE JUST THE KDZ FILE ON "Select KDZ File" TO THE ONE YOU DOWNLOADED AND IS SUITABLE FOR YOUR OWN DEVICE.
Move PhoneMode from DIAG to EMERGENCY. Select KDZ File: you have a file called "V10J_00.kdz" in the same folder as the tool. Select that. Press CSE Flash (CAUTION!!! This will reflash the phone and YOU WILL LOSE ALL YOUR DATA SO BE WARNED).
Another screen will open and press START.
Another screen will open once again press OK.
At a point you will get an error like "Offline BLA BLA". DON'T DO ANYTHING DO NOT PRESS OK.
Wait until your phone reboots and then you can close this tool.
Remove USB cable.
IMPORTANT STEP:
Pull out the battery. Wait 10 seconds put it back. While holding VOLUME DOWN + HOME BUTTON press POWER BUTTON. Wait until you see LG logo and stop pressing POWER. Keep pressing the other 2 until you see android robot doing things. Wait until the phone boots.
CONGRATZ you are on JELLYBEAN (Or the KDZ you chose).
3. Rooting on Stock Rom (Jellybean).
When you see the welcome screen just fast forward everything.
Go to system settings->security->tick Unknown sources->OK.
Go to system settings->developer options->OK->tick USB debugging->YES.
With an SD card reader or with your USB connected as Media Sync (MTP) copy the "Framaroot-1.9.1.apk" to your SD Card.
Using the phone's FILE MANAGER go to external_SD and click the Framaroot you just copied. Run it using Package Installer Just Once and Install.
When finished press OPEN. At the first choice choose Install SuperSU and then press on "Gandalf". You will get Success. Press OK and reboot.
You will see SuperSU in you apps.
YAY! IT'S DONE.
4. Installing Unlocked Bootloader and ClockWorkMod Recovery (CWM).
*SAME FILE YOU NEED FOR LG P715
Earlier you have download "Free LG P710.rar" and in the first step you installed ADB. We will use that now.
Unrar the "Free LG P710.rar" and place the 2 files ON THE ROOT (only on root) of the SD card using device mounted in MTP mode or SD card reader. Put back the card if you use the second option.
WARNING!!!
This can mess up you device so just do what i say step by step!
Plug the USB Cable in the Phone once again and use MTP connection mode.
Click Start+R type CMD and press ENTER.
Run the Following with copy paste to CMD.
Code:
adb devices
You will see your device.
*IF YOU CANNOT MAKE YOUR DEVICE BE RECOGNIZED IN "adb devices" do this:
Install this: https://play.google.com/store/apps/details?id=jackpal.androidterm&hl=ro
Open terminal and continue with the steps down below.
Code:
adb shell
You will see something ending with $.
Code:
su
Unlock the dvice if it is locked and your phone will ask for superuser permission press GRANT.
Code:
dd if=/storage/external_SD/APPSSBL.bin of=/dev/block/mmcblk0p5
This will copy the unlocked bootloader to the bootloader partition.
Code:
dd if=/storage/external_SD/recovery.img of=/dev/block/mmcblk0p17
This will copy the CWM to recovery partition.
Code:
reboot recovery
This will reboot your phone in CWM if you followed all steps correctly.
GREAT SUCCES we have an unlocked bootloader and CWM.
Close your CMD.
Unplug USB.
5. Flashing KitKat or a Custom Rom through CWM.
*IF YOU WANT TO FLASH ANOTHER ZIP FILE OR YOU ARE ON P715 JUST USE THE ARCHIVE YOU NEED AS REFERENCE, NOT "P710 Stock KK.zip". CHOOSE THE FILE THAT IS MOST SUITABLE OR YOU THINK IT'S BEST FOR YOU
I made "P710 Stock KK.zip" you downloaded. This is the stock image for KK Open Europe. Here you can either flash mine or search for a Custom Rom for your device. Either way you will follow the exact same steps but with a different archive. I will take for reference the "P710 Stock KK.zip".
Plug USB in.
You Navigate using Volume Up Button (UP) and Volume Down Button (DOWN). The Power Button is OK.
Do this:
- Go to "wipe data/factory reset" and OK. Go to YES then OK. Wait until done.
- Go to "mounts and storage" and do the following: "format /cache" and "format /system" everytime with YES as second option. Press "go back" once.
- Go to "advance" and then "wipe dalvik cache" and YES. Press "go back".
Here you have 3 options.
OPTION 1.
Use an SD card reader copy the Zip file to the root of the SD card or copying using CWM. Using CWM you navigate with Volume Up and Volume Down to "mounts and storage" press POWER BUTTON (OK). Go to "mount USB storage" and your SD card will appear in windows and you can copy. After that you press "go back" 2 times to get to the main menu.
Go to "Install zip" and then "choose zip from sdcard". Search for the zip file and press OK then go to "YES" and press OK. Wait until done.
Go to "wipe data/factory reset" and OK. Go to YES then OK. Wait until done.
Press "Reboot System Now" and "yes" if asked (if you are asked about some fix or anything after you press reboot now choose the positive thing like the answer that is not no).
OPTION 2.
Copy the file using adb push. Open a CMD window in Windows (Start+R type CMD press ENTER). Copy this:
Code:
adb push
With the space. After space go where you downloaded the zip file highlight it and drag it in the CMD. Leave a space after that and type /sdcard (without space after).
Wait until done and close CMD.
After you copied the file to your sdcard go to "install zip" -> "choose zip from sdcard" -> search for the "P710 Stock KK.zip" press OK then go to "YES" and your installation will beging. Wait until it is done. Go to "wipe data/factory reset" and OK. Go to YES then OK. Wait until done.
Press "Reboot System Now" and "yes" if asked (if you are asked about some fix or anything after you press reboot now choose the positive thing like the answer that is not no).
NOTE: In the zip i made i don't know why i couldn't sideload it but usually you do not have to copy to SD card to flash something. You can sideload it. All you have to do is:
-Go to "install zip" -> "install from sideload"
On your computer open a CMD and copy this :
Code:
adb sideload
Copy with space and after what you copied grab the zip you want to flash and drag it to CMD. Hit ENTER. Sideload will send the zip to phone and process of flashing will start. After it is done reset to factory again.
Press "Reboot System Now" and "yes" if asked (if you are asked about some fix or anything after you press reboot now choose the positive thing like the answer that is not no).
CONGRATZ YOU ARE NOW ON KITKAT. I HONESTLY THINK THAT YOU SHOULD GO FOR THIS CUSTOM ROM OVER HERE BECAUSE IT IS LIKE 10 TIMES BETTER THAN THE STOCK KK. TO INSTALL JUST DOWNLOAD THE ZIP FILE FROM THERE (V2) AND FOLLOW THE TUTORIAL WITH JUST REPLACING THE ZIP WITH THE OTHER ZIP.
LINK TO ROM: http://forum.xda-developers.com/optimus-l3-l5-l7-l9-ii/development/l7-ii-p710-amigakitkat-t2890092
LINK TO DOWNLOAD: http://d-h.st/GSh
6. Flashing Root through CWM.
On some ROMS root will not be there. To avoid this we will flash the SuperSU zip.
To get to recovery you have 2 ways:
- From you ROM connect USB as MTP or in a way that ADB recognizes it (device gets detected by adb devices) type adb reboot recovery.
- Close your phone. At the same time press VOLUME DOWN + HOME BUTTON + POWER BUTTON. When you see the LG logo stop pressing POWER BUTTON. Keep the others 2 until you are in CWM.
Install the SuperSU zip with one of the ways you learnt at step 5.
You are rooted now.
Hope everything worked out fine for you and you are happy. Have a really nice day.
CREDITS:
riskey95 -> his work for CWM recovery and Hacked Bootloader
Chainfire -> for making SuperSu possible
Snoop05 -> for the amazing 15 seconds ADB Installer
alephzain -> making Framaroot, such an easy root method
santhoosh -> for the tutorial of making CWM flashable zip from KDZ
Amiga500 -> for super cool KK Rom
airidosas252 -> best kernel on the market
ME -> for putting everything together and writing this
Everyone i forgot just PM me
Lg Flash Tool 2014 : http://tinyurl.com/kggahet
P710 Stock KK.zip: http://tinyurl.com/p7q7d75
P715 Stock KK.zip: http://tinyurl.com/nllkxfm
P713_CIS_KK.zip: http://tinyurl.com/nv3uzop
LG P715 (JellyBean).kdz: http://tinyurl.com/lwv29xr
adb-setup-1.4.2.exe: http://tinyurl.com/qca8abd
VC_RedistInstaller.exe: http://tinyurl.com/n98r7wg
LG Drivers: http://tinyurl.com/l3mgf49
CHANGELOG:
- added support for P715
- added P713 CIS
- added new version of SuperSU
This is fantastic! I've been looking for how to convert KDZ to a CWM Zips because of trouble rooting the P713 Firmware
Dennydap said:
This is fantastic! I've been looking for how to convert KDZ to a CWM Zips because of trouble rooting the P713 Firmware
Click to expand...
Click to collapse
Does P713 have NFC?
This method actually works for dual sim too,you just have to use P715 kdz's.
KWG V2 said:
This method actually works for dual sim too,you just have to use P715 kdz's.
Click to expand...
Click to collapse
Yeah it does. Maybe this weekend I will mod it. It is usefull for recoverying from soft bricks also just Step 1 and 2.
it was great till i get stuck on boot loop ,,, now how to solve ?
thanks for the useful guide.
I have a problem though, I cannot go after kdz extraction.
LG Tools stops with an cryptic error like [009.400.120.120.120]PC????? and looking at the log it seems there are troubles in unpacking the kdz file.
I have tried with different roms but still the same.
Does anyone has the same problem ?
xak-fr said:
it was great till i get stuck on boot loop ,,, now how to solve ?
Click to expand...
Click to collapse
Where exactly did you get a boot loop?
thanks for the useful guide.
I have a problem though, I cannot go after kdz extraction.
LG Tools stops with an cryptic error like [009.400.120.120.120]PC????? and looking at the log it seems there are troubles in unpacking the kdz file.
I have tried with different roms but still the same.
Does anyone has the same problem ?
Click to expand...
Click to collapse
Did you run as administrator? Do you have drivers installed? Tell me exacly what you did and what happened.
xak-fr said:
it was great till i get stuck on boot loop ,,, now how to solve ?
Click to expand...
Click to collapse
the problem is on V10J,, i dont know where you find it but it stucks,,, i used the lg flashtool for flashing kit kat i got the original one and the phone starts running but the thing that made me curious is that nothin on phone changed,, it is the same as it was when i had stock kit kat,, no factory reset, no nothing,,, can anyone explain please ?
xak-fr said:
the problem is on V10J,, i dont know where you find it but it stucks,,, i used the lg flashtool for flashing kit kat i got the original one and the phone starts running but the thing that made me curious is that nothin on phone changed,, it is the same as it was when i had stock kit kat,, no factory reset, no nothing,,, can anyone explain please ?
Click to expand...
Click to collapse
I can't really understand you. The point of this guide is to get root on kitkat so flashing with lg flashtool will not work if you want kit kat rooted. I tested that V10J on my own l7 2 (p710). Also if you flashed Jellybean did you press CSE Flash not Normal Flash?
scholars nxperan
christi9503 said:
I can't really understand you. The point of this guide is to get root on kitkat so flashing with lg flashtool will not work if you want kit kat rooted. I tested that V10J on my own l7 2 (p710). Also if you flashed Jellybean did you press CSE Flash not Normal Flash?
Click to expand...
Click to collapse
sorry for my english ,, let me explain,, i had stock kit kat on my P710,, I flashed JellyBean (V10J that was on flashtool folder). after the flash (CSE Flash) finishes i got stuck on boot loop,, so after many tries to revive the phone i used to flash the stock kit kat again and the phone started working but in the phone nothing changed like nothing happened ,, i know it is not rooted , i flashed stock kit kat (V20A.KDZ)
so the problem is the boot loop i got after flashing V10J i found in folder,,,
xak-fr said:
sorry for my english ,, let me explain,, i had stock kit kat on my P710,, I flashed JellyBean (V10J that was on flashtool folder). after the flash (CSE Flash) finishes i got stuck on boot loop,, so after many tries to revive the phone i used to flash the stock kit kat again and the phone started working but in the phone nothing changed like nothing happened ,, i know it is not rooted , i flashed stock kit kat (V20A.KDZ)
so the problem is the boot loop i got after flashing V10J i found in folder,,,
Click to expand...
Click to collapse
What model you have P710?
christi9503 said:
What model you have P710?
Click to expand...
Click to collapse
yes, Lg optimus L7II P710
xak-fr said:
yes, Lg optimus L7II P710
Click to expand...
Click to collapse
Ok do that step again. Flash with that tool using the image i provided. After the last ok. Even when you get the offline error don't touch it until phone reboots. If you get bootloop do this.
1. Pull out battery. Wait 10 seconds. Push battery back in.
2. While holding POWER DOWN + HOME BUTTON press POWER BUTTON. Wait until you see LG logo then stop presing POWER. You will get to see android guy doing stuff. Then tell me if it's ok.
christi9503 said:
Ok do that step again. Flash with that tool using the image i provided. After the last ok. Even when you get the offline error don't touch it until phone reboots. If you get bootloop do this.
1. Pull out battery. Wait 10 seconds. Push battery back in.
2. While holding POWER DOWN + HOME BUTTON press POWER BUTTON. Wait until you see LG logo then stop presing POWER. You will get to see android guy doing stuff. Then tell me if it's ok.
Click to expand...
Click to collapse
yes, i get the boot loop but after the reset is ok,, now will go on other steps ,, thank you
xak-fr said:
yes, i get the boot loop but after the reset is ok,, now will go on other steps ,, thank you
Click to expand...
Click to collapse
Don't forget to press the thx button it's in the right . I will add this to the tutorial I didn't need it but who knows.
I managed to do the "root" step, but somehow cannot proceed with the next step.
When I check "USB debugging", the phone doesn't connect to the computer for some reason. I tried multiple computers, with no luck. The "adb devices" says just empty "List of devices attached".
If I disable the USB debugging, the phone gets connected just fine, if I enable it again, it gets stuck on "Connected as installer", and doesn't connect as MTP....
Any idea how to fix this?
Do you have drivers installed? Also when you press MTP cancel if your phone wants to install anything.
Sent from my LG-P710 using XDA Free mobile app
christi9503 said:
Do you have drivers installed? Also when you press MTP cancel if your phone wants to install anything.
Click to expand...
Click to collapse
I tried everything, without luck. I ended just using terminal emulator to copy the files on phone directly (might be cool to add this to your tutorial, as someone else can also have this problem). So, now I'm on Amigas ROM - makes a HUGE difference! Thanks, looking forward for some other custom ROMs for this phone..
vasikgreif said:
I tried everything, without luck. I ended just using terminal emulator to copy the files on phone directly (might be cool to add this to your tutorial, as someone else can also have this problem). So, now I'm on Amigas ROM - makes a HUGE difference! Thanks, looking forward for some other custom ROMs for this phone..
Click to expand...
Click to collapse
Strange huuummm. I don't know. Yeah i will add Terminal Emulator also in weekend. Never happened to any of my phones before... Maybe driver conflict on your PC or something like that.
Hi...
I try to root my FL02 (ALCATEL FLASH PLUS 2) every thing goes perfect and i get ORANGE STATUS but at the last step when trying to flash the rom with TWRP it could not read the SD card and system folder isn't abel to wipe so i try to repeat steps again.
first flasing in the video done and mobile restarting. no logo on screen and it doesnt boot and cannt go in boot mode or fastboot mode.
it connect and disconnect with PC but i still can connect it to flashing programme and i can send flash from PC but it doesnt boot and nothing appear on the screen.
any help....
Phone : FLASH PLUS 2
N D1M N7KE 03 TJZ
ANDROID 6.0
I follow this video to root
youtube.com/watch?v=d8zPGPJ_uZY
EFAYSAL said:
Hi...
I try to root my FL02 (ALCATEL FLASH PLUS 2) every thing goes perfect and i get ORANGE STATUS but at the last step when trying to flash the rom with TWRP it could not read the SD card and system folder isn't abel to wipe so i try to repeat steps again.
first flasing in the video done and mobile restarting. no logo on screen and it doesnt boot and cannt go in boot mode or fastboot mode.
it connect and disconnect with PC but i still can connect it to flashing programme and i can send flash from PC but it doesnt boot and nothing appear on the screen.
any help....
Phone : FLASH PLUS 2
N D1M N7KE 03 TJZ
ANDROID 6.0
I follow this video to root
youtube.com/watch?v=d8zPGPJ_uZY
Click to expand...
Click to collapse
Ok, tell me to can help you;
Do you have TWRP installed?
Do you unlock bootloader succesfully?
In which modes you can enter? fastboot, recovery, download (do detects SPFlash Tool?)
SubwayChamp said:
Ok, tell me to can help you;
Do you have TWRP installed?
Do you unlock bootloader succesfully?
In which modes you can enter? fastboot, recovery, download (do detects SPFlash Tool?)
Click to expand...
Click to collapse
Thank you SubwayChamp for help.
No , TWRP is not installed now .
Yes, I think bootloader has been unlocked. It is done with Orange status.
I think it is in download mode. it detects SPFlash.
EFAYSAL said:
Thank you SubwayChamp for help.
No , TWRP is not installed now .
Yes, I think bootloader has been unlocked. It is done with Orange status.
I think it is in download mode. it detects SPFlash.
Click to expand...
Click to collapse
Ok, I guess that your device is actually in bootloop and don´t booting.
Tutorial that you followed has many steps and don´t need to do all this to just root device and it contains some files like lk.bin that you can´t be sure that should be for your device.
Some users use this file (lk.bin) of an unlocked device and think that flashng in other device then get unlock it but no need, your device can be unlock it just follow some commands in fastboot mode.
Now you can do the next;
Try to flash again your rom stock (I guess that you don´t have a backup), if for some reason your official tool doesn´t work then use only some images like boot, system and userdata with the scatter.txt to flash them through SP Flash Tool.
Here a link to TWRP https://youtu.be/6vj_BY6xJdA, you can root it with supersu v2.78 0r v2.82 and here some files that can be usefull too https://drive.google.com/uc?id=0BwJgeCYTpnEHNlg2VUlieHFTYVU&export=download
Update steps that you are following to can assist. What extension has your rom and if it is recogniced for SP Flash Tool. I didn´t ask you if you can enter to fastboot mode and if you can then you can know if your bootloader is unlocked typing fastboot oem info
Most info that you give and some screenie will help to understand better
Unfortunatly, it can not enter to fastboot or recovery mode. Those files in replay didn't work and i dont have a backup. I try to flash recovery.img, system.img and preloader_shine_plus.bin . All done but it still black screen and does not boot. But now it connect to Pc without disconect .
I cant add link or images to my post.
EFAYSAL said:
Unfortunatly, it can not enter to fastboot or recovery mode. Those files in replay didn't work and i dont have a backup. I try to flash recovery.img, system.img and preloader_shine_plus.bin . All done but it still black screen and does not boot. But now it connect to Pc without disconect .
I cant add link or images to my post.
Click to expand...
Click to collapse
Gmail didn´t warn myself about your post. Did you solve it?
You said that flashed recovery, system and preloader but how, through SPFlashTool?, if yes, are you sure that this tool recogniced your device?
You forgot to flash boot.img too.
Other way to try; flash only preloader.bin and then try flashing boot, system and userdata that are the three most important partitions to can boot.
Like last resort you can do a Format all + flash but only like last.
SubwayChamp said:
Gmail didn´t warn myself about your post. Did you solve it?
You said that flashed recovery, system and preloader but how, through SPFlashTool?, if yes, are you sure that this tool recogniced your device?
You forgot to flash boot.img too.
Other way to try; flash only preloader.bin and then try flashing boot, system and userdata that are the three most important partitions to can boot.
Like last resort you can do a Format all + flash but only like last.
Click to expand...
Click to collapse
first of all thank you for your help. I was busy last week .
Yes it was with SPFlash and it is show MT6775 when mobile connect . but if i try flashing boot it gives an erorr and cant flashing.
I think i have a wrong boot file.
I miss userdata file.
Do you know where can i download necessary files for this model?
I apologize for delaying. It is time for school examin
EFAYSAL said:
first of all thank you for your help. I was busy last week .
Yes it was with SPFlash and it is show MT6775 when mobile connect . but if i try flashing boot it gives an erorr and cant flashing.
I think i have a wrong boot file.
I miss userdata file.
Do you know where can i download necessary files for this model?
I apologize for delaying. It is time for school examin
Click to expand...
Click to collapse
I´m not sure if you are connecting correctly your device at right time and form to can flash it properly. Every device has more or less a specific way to do it. My last alcatel it was connected just with device power off and after to tap on download, but in other device Blu Dash was connected pressing just vol_up and my last mt6757 Bluboo had to press both vol up and down at time to connect to pc and after to tap on download option. To have sure that is well done increase volume in your pc, you will hear a first sound that is cause pc is recognicing but then you have to hear a second sound that is when SPFlashTool is recognicing device and you will see a red line in down side of the tool window, release button inmediately and let tool to work.
This is a good rom for your device according the author is optimized https://droid1311.blogspot.com/2017/08/alcatel-fl02-aka-flash-plus-2-via.html and this is the link directly if you have troubles with pop-up-adds https://drive.google.com/file/d/0BwAGh1drb91SeDZwV1VXbXpjQWM/view
Also you can try with other versions of SP Flash Tool, most stable maybe should be v5,1628 https://androidmtk.com/smart-phone-flash-tool leth me know how you go
If I understant, the status bar has to be red then I will release the mobile button and click download in SPFlashTool.
SPFlashTool 5.1628:
I try all the way with and without pressing any button but no luck . And when it work finishing with error.
SPFlashTool 5.1628:
I try all the way to get that mode but nothing works. So I try to click download button then conect the phone by random buttons and every time i get red color , yellow , green ,purple , yellow (for many times 100%)
then i get this error:
ERR: STATUS-SEC-IMG-TYPE-MISMATCH (0xC002002A)
EFAYSAL said:
If I understant, the status bar has to be red then I will release the mobile button and click download in SPFlashTool.
I try all the way to get that mode but nothing works. So I try to click download button then conect the pkone by random buttons and every time i get red color , yellow , green ,purple , yellow (for many times 100%)
then i get this error:
ERR: STATUS-SEC-IMG-TYPE-MISMATCH (0xC002002A)
Click to expand...
Click to collapse
There is a part that is not variable in the way to use this tool, ever you have to tap on download before to connect device and is recommendable too connect cable usb to pc (not yet to device); from here is when the button that you have to press can vary but like I said you before in my last mt6757 (a very similar to yours) works pressing both vol at same time to connect terminal cable to device and now you will see a red line (could be violet-ish)
Try before just flashing only preloader file to recreate some partitions and then do other flash for the other files.
Of course you have to be sure that all drivers are installed correctly cause this tool needs to put your device in download mode (a special level) and also keep it in this state so find VCOM drivers for Alcatel and adb/fastboot installer and try to uninstalling some older drivers that you don´t use and many times we keep in our pcs and for a short data transmission can helo that all the rom move it in same folder where SPFlashTool is allocated.
After updating drivers and trying all the possibilities buttons the red line doesnt appear.
EFAYSAL said:
After updating drivers and trying all the possibilities buttons the red line doesnt appear.
Click to expand...
Click to collapse
Ok, here there are somethings that we need to know
- First of all don´t forget to charge your battery, after many attempts could consume a lot.
- Your device is recogniced in fastboot mode? mtk has two variables ways to enter to, pressing both vol + pwr till an options menu appear, then you have to select, and the other method most known is vol down+ pwr to go diirectly
- In what android version are you, 6.0?
- What is the exact variant of your device, you can know maybe seeing in the box, this rom is for 5095K version 6.0 MM
- Did you try to flash just preloader, only this file?
If SPFlashTool don´t give signals of recognicing device is probably that your device is not now totally power off, try pressing pwr by 7 seconds, then try to flash again combining both vol with pwr button
Upload some screenshot about the process
SubwayChamp said:
Ok, here there are somethings that we need to know
- First of all don´t forget to charge your battery, after many attempts could consume a lot.
- Your device is recogniced in fastboot mode? mtk has two variables ways to enter to, pressing both vol + pwr till an options menu appear, then you have to select, and the other method most known is vol down+ pwr to go diirectly
Click to expand...
Click to collapse
Which option mode should appear? Screen is always black (off) all that i have on the phone is the LED.
I try more than 4 different drivers for Alcatel Flash Plus 2 (vcom & cdc) but no sound from SPFlash to prove that it recognise the phone. Sounds just release and keep relrease from Windows 10.
SubwayChamp said:
- In what android version are you, 6.0?
Click to expand...
Click to collapse
Yes, last time it was 6.0 before the root
SubwayChamp said:
- What is the exact variant of your device, you can know maybe seeing in the box, this rom is for 5095K version 6.0 MM
Click to expand...
Click to collapse
Unfortunatly, I dont know . There is nothing on the box or manuel.
that is what i found on the box :
FL02
Venus gold H-B
FL02-2HLCEU2
- PWR+VOL(+) : reset the phone
SubwayChamp said:
- Did you try to flash just preloader, only this file?
Click to expand...
Click to collapse
It is done. all that i have to do is to tab on Download and then connect the phone and I dont need to press any button.
SubwayChamp said:
If SPFlashTool don´t give signals of recognicing device is probably that your device is not now totally power off, try pressing pwr by 7 seconds, then try to flash again combining both vol with pwr button
Upload some screenshot about the process
Click to expand...
Click to collapse
I did that but it is same.
Note:
Success fash always done without pressing any button on the phone. and I try it with and without buttons sometimes it is fail when I press a button and otherwise it work.
I have formated whole fash.
EFAYSAL said:
Which option mode should appear? Screen is always black (off) all that i have on the phone is the LED.
I try more than 4 different drivers for Alcatel Flash Plus 2 (vcom & cdc) but no sound from SPFlash to prove that it recognise the phone. Sounds just release and keep relrease from Windows 10.
Yes, last time it was 6.0 before the root
Unfortunatly, I dont know . There is nothing on the box or manuel.
that is what i found on the box :
FL02
Venus gold H-B
FL02-2HLCEU2
- PWR+VOL(+) : reset the phone
It is done. all that i have to do is to tab on Download and then connect the phone and I dont need to press any button.
I did that but it is same.
Note:
Success fash always done without pressing any button on the phone. and I try it with and without buttons sometimes it is fail when I press a button and otherwise it work.
I have formated whole fash.
Click to expand...
Click to collapse
You need to try two different ways to flash files and restore your device.
First method: fastboot mode
You need to get device enter to fastboot in order to flash some files like system, boot and userdata, then there are two main methods to do it:
- Pressing pwr + vol down
- And I mentioned that sometimes work pressing both volume button + pwr and a menu have to appear to can select an option to enter to (fastboot mode), in some devices this method is not working but you have to try several times attempting to.
Second method: SPFlashTool
You have to ever press first of all Download box and connect terminal cable to pc and the buttons thhat you need to press at time to connec cable usb to your device may vary, sometimes vol down, sometimes both vol but never pwr button; if pc recognice then you have to release all buttone an let it pc continue the flash process.
If SPFlashTool recognice device first flash only preloader file and select now lk.bin too. Flash only these two files and after do again a new flash with the rest of the files, Why you need to do this? your partitions are corrupted and you need to restore them with these files in order to can flash all another files.
Before all of this charge your battery, if you have a cover removable then extract it some minutes and put it again.
Also I read that for this model it´s used this tool instead of SPFlash Tool https://androidmtk.com/download-sugar-mtk-sp-flash-tool (inside the zip you will find a password to start the tool) but I´m not sure what kind of rom it needs, you have to connect your device to begin the process, you will find in product models section in the tool this variant for your device "FL02"
Try first the other tool and then this and let me know how you go, mtk devices are almost unbrickeable so it´s just to find the appropriate way to return it to the life.
Hi again!
It was along time,I know . But I tried to know why I can’t return my phone back to life.
I have searched all possible websites for rom of this model and I have formatted my pc and installed win7 with all necessary drivers.
I can’t found any rom for it but now I can flash all the necessary files for boot they flashing and running smoothly but the mobile can’t boot up.
I try to use that app in your replay. It recognizes the device but stuck after that and keep looking for rom without any chance to download it.
I think I have a wrong rom files. I can’t find any other reason but this.
I will write again all information about my phone:
It is called Alcatel Flash Plus 2
I bought it from AliExpress and it came from Indonesia as I remember (not sure)
On battery wrote:
FL02
TCL communication Ltd
FL02-2HLCEU2
EFAYSAL said:
Hi again!
It was along time,I know . But I tried to know why I can’t return my phone back to life.
I have searched all possible websites for rom of this model and I have formatted my pc and installed win7 with all necessary drivers.
I can’t found any rom for it but now I can flash all the necessary files for boot they flashing and running smoothly but the mobile can’t boot up.
I try to use that app in your replay. It recognizes the device but stuck after that and keep looking for rom without any chance to download it.
I think I have a wrong rom files. I can’t find any other reason but this.
I will write again all information about my phone:
It is called Alcatel Flash Plus 2
I bought it from AliExpress and it came from Indonesia as I remember (not sure)
On battery wrote:
FL02
TCL communication Ltd
FL02-2HLCEU2
Click to expand...
Click to collapse
Yes, so many time
When device is booting, it stays in bootlogo or goes atleast to bootanimation?
I understand that you tried with Sugar tool with no lucky.
Did you try again through SP Flash tool? trying to flash in a first attempt only preloader file and in a second attempt the other files? (try with 2 or 3 versions and see the differences).
Is there some custom development, recovery, roms for your device?
I think that now you are flashing correct rom through fastboot but like you did before bad/wrong flashings your bootloader is refusing to boot to system. Flash through fastboot all the partitions that you can follow the syntax for every one of them by i.e. typing fastboot flash cache cache.img and so on one by one (some of them are unflashable through this method)
SubwayChamp said:
Yes, so many time
When device is booting, it stays in bootlogo or goes atleast to bootanimation?
Click to expand...
Click to collapse
Unfortunately, nothing happens. The screen is black no bootlogo appears or anything that shows that device is booting. It is looking like nothing has happened.
SubwayChamp said:
I understand that you tried with Sugar tool with no lucky.
Click to expand...
Click to collapse
Yes. After recognizing it keeps trying to download data but no luck.
SubwayChamp said:
Did you try again through SP Flash tool? trying to flash in a first attempt only preloader file and in a second attempt the other files? (try with 2 or 3 versions and see the differences).
Click to expand...
Click to collapse
I know it is disappointing!. I try this but no luck.
SubwayChamp said:
Is there some custom development, recovery, roms for your device?
Click to expand...
Click to collapse
Unfortunately no, all that I found are TWRP recovery Roms. I don’t know if I can use them with SPFLASH Tool.
SubwayChamp said:
I think that now you are flashing correct rom through fastboot but like you did before bad/wrong flashings your bootloader is refusing to boot to system. Flash through fastboot all the partitions that you can follow the syntax for every one of them by i.e. typing fastboot flash cache cache.img and so on one by one (some of them are unflashable through this method)
Click to expand...
Click to collapse
I began lose hope that the mobile could work again. I live in Sweden and no technicians kan help me to fix this issue. I should do it by myself.
If you kan help me to do that step by step. Please write to me what I have to do from the beginning step by step until I reach the end. To be sure I'm doing it by the right way.
Thanks
EFAYSAL said:
Unfortunately, nothing happens. The screen is black no bootlogo appears or anything that shows that device is booting. It is looking like nothing has happened.
Yes. After recognizing it keeps trying to download data but no luck.
I know it is disappointing!. I try this but no luck.
Unfortunately no, all that I found are TWRP recovery Roms. I don’t know if I can use them with SPFLASH Tool.
I began lose hope that the mobile could work again. I live in Sweden and no technicians kan help me to fix this issue. I should do it by myself.
If you kan help me to do that step by step. Please write to me what I have to do from the beginning step by step until I reach the end. To be sure I'm doing it by the right way.
Thanks
Click to expand...
Click to collapse
I´ll tell you some ideas with no any specific order that you can try or see if works.
Really very strange that display stays in black, you told me that flashing files through fastboot is working but doesn´t appear not even bootlogo, connect to pc as it is and see how pc recognices in devices manager and my pc if appears like a determined drive d/e/f so it looks that some bad flashing burn your kernel and this case is similar to when a Samsung device need to use jtag method to revive, if in your country no-one knows about Alcatel devices this could be a similar case to what I´m saying then it could be a clue for a technician. I tell you this cause many time ago when I flashed by error a Samsung s4 and only this method revived my device.
Try this, flash your stock recovery only through SPFlash tool and flash after through Alcatel Download tool your stock rom cause some firmwares need to detect stock recovery first to can flash other partitions.
At this stage don´t you have stock recovery, no? so you can try to format data cause sometimes when bootloader is altered then avoid to boot and formatting data can solve this.
If this recovery twrp is for your device you can try flashing through SPFlash tool, you have to put recovery.img and scatter-txt in a same folder. then if succesfull format data, system, wipe cache and dalvik and maybe later try to port some custom rom would be a way to solve this.
To flash any partition through fastboot this is the syntax, just follow one by one any of the files that are in your rom folder so just follow these, if some of then can´t be flashed don´t worry then it´s not flashable:
fastboot flash boot bot.img
fastboot flash cache cache.img
fastboot flash lk lk.bin
and so on till the end
...But after try this if you didn´t get boot to recovery and obviously you can´t delete data nor system then delete first the next partitions trough fastboot typing:
fastboot erase system
fastboot erase cache
fastboot erase userdata
fastboot erase boot
Try all this and let us see how it goes
I have flashed TWRP Rom but it is same , no luck.
On sugar tool I got this message after success flashing via SPFLASH tool.
I tried all possible buttons to connect device to PC on Fastboot mode but the PC cannot send data to my device.
To be in Fastboot mode , the device has to boot while pressing on (PWR & VOL+) but my device can’t boot.
EFAYSAL said:
I have flashed TWRP Rom but it is same , no luck.
On sugar tool I got this message after success flashing via SPFLASH tool.
View attachment 4518365
I tried all possible buttons to connect device to PC on Fastboot mode but the PC cannot send data to my device.
To be in Fastboot mode , the device has to boot while pressing on (PWR & VOL+) but my device can’t boot.
Click to expand...
Click to collapse
I see that Sugar tool detects your device like rooted and refuses to flash anything, compare imei number which is in the box, I hope that it couldn´t be changed.
Don´t tell me simply no luck, what it says in SPFlash tool when you tried to flash TWRP and I guess that you put scatter-txt and twrp renamed recovery.img simply in the same folder. Just to be clear, to can flash with this tool your device it has to be off not needed fastboot for this. (provide some screenie)
Other combination of keys to enter to fastboot to flash some partitions when something is missing is, try these three ways:
- Pressing only vol down and at same time connecting to charger (connect first one terminal of cable to your device and then to the charger)
- Pressing the three buttons till a menu appears (you must to release inmediately all)
- Pressing vol up + pwr till a menu appears (you must to release pwr button inmediately) then choose fastboot
In the post 4 I provided a link from Google Drive, in this zip there are 8 items;
- From the item 2 use this version of SP Flash tool, put the four files in a folder and flash them
- In the item 3 you will find some scripts for fastboot, maybe they´re working better and also you have here a subfolder with twrp image.
- And if you get sucessfully install twrp in the item 7 there is a backup with some files to restore from this recovery.
Try one by one and update the info, I hope that your motherboard is not damaged.