UK Firmware for P7500 - Please Help! - Galaxy Tab 10.1 Q&A, Help & Troubleshooting

Hi,
I have been struggling for a while to get my Tab back to a factory state. I flashed the KI1 stock rom but it is an Italian Rom. I then tried to flask KG7 which again was an Italian rom, so I changed the CSC using a CSC changing app from the Android Store, which successfully changed the CSC to XEU (UK).
The problem is that now when I try and connect to Kies it says that this version of the tab can't be updated (I guess this is because of the way I changed the CSC). I would REALLY appreciate it if someone could point me in the right direction of an official UK Rom for the P7500, so that it can be updated in Kies. It is causing me a real headache!
Thanks

Surely someone can help out with this? I just need a stock UK rom that can be updated using Kies!

not sure if this helps ...but sammobile has a list of firmwares to download, you could try the version you had before you upgraded to KI1
http://www.sammobile.com/threads/328-Samsung-P7500-Galaxy-Tab-10.1-Firmwares.

I had a version of KG7 - I tried flashing that one from samfirmware, but the CSC was Italian. I changed the CSC to XEU (UK) which worked, but the tab couldn't then be updated in Kies.

im one step behind! Flashed to KI1 and wanting to change.. I shall watch this post!

Related

Help -need original P7500 firmware with CSC=NEE

My tab came original with CSC-NEE(Norwegian)
I flashed KG9 with Odin, CSC was NSE.
Last night I upgraded via KIES to KI1 (CSC= NSE)
This rom installed a lot of bloatware like Swedish newspaper and magazines apps and it can't be uninstalled the normal way with uninstall.
How can I find a original firmware for P7500 with CSC=NEE? I have tried several P7500 firmwares from samfirmware but so far I haven't found andy with CSC=NEE.
I need the one with NEE so I then can try Kies update again to get the correct uppgrade, for NEE.
Anyone have a original firmware for P7500 with CSC NEE?
nilste said:
My tab came original with CSC-NEE(Norwegian)
I flashed KG9 with Odin, CSC was NSE.
Last night I upgraded via KIES to KI1 (CSC= NSE)
This rom installed a lot of bloatware like Swedish newspaper and magazines apps and it can't be uninstalled the normal way with uninstall.
How can I find a original firmware for P7500 with CSC=NEE? I have tried several P7500 firmwares from samfirmware but so far I haven't found andy with CSC=NEE.
I need the one with NEE so I then can try Kies update again to get the correct uppgrade, for NEE.
Anyone have a original firmware for P7500 with CSC NEE?
Click to expand...
Click to collapse
Had the same problem with the NSE and bloatware, ended up updating thru Odin
it works perfect - lost my 3G connection because of sales code ITV italien firmware.
Here is what I did:
http://forum.xda-developers.com/showpost.php?p=17609489&postcount=52
-

[Q] How to unroot P7500 (WiFi+3G) and backtrack to stock KG7 from KI1

Hi there!
I have an European P7500 3G tab, which came with firm version KH7. I recently installed version KI1 from samfirmware, and it changed my CSC from Spanish FOP to Italian ITV, as well as installing some Italian stuff.
My problem now is that I noticed I have Newton rings on my screen (shame on you, Samsung!!), and I want to take it to the Samsung Service Center, but I think warranty would be voided if I don´t return it to the original version.
Can anybody advise if it is possible to simply install an older stock version (say KG1 or KG7) from samfirmware on this newer version KI1? Would this method also unroot the tab?
Thanks!
I am in the same situation. Simply flash KG7 from samfirmware, but the question is, how to reset those flashcounter?
Does flashing a stock rom with odnin effect the flashcounter
No one answer? I really need the guide to unroot my tab p7500. All the instruction I found is for P7150 wifi version. I wonder whether I can use this step or not for my tab
http://galaxytabhacks.com/galaxy-tab-10-1-hacks/how-to-unroot-your-galaxy-tab-10-1/

Help! Return to swedish stock P7510

Hi guys.
I really need to return to swedish stock firmware on my GT-P7510 but I can't find it anywhere. The csc on the original firmware is NSE. Is there anyway to mess with kies to upgrade it to original NSE. Or if someone has tips on how to get swedish stock firmware back I would be extremely grateful.
Best regards, Martin.
Go to samfirmware.com and the Swedish rom should be there?
Will have to be flashed through Odin, if you don't mind a non-Swedish, but official Samsung, check this site:
http://www.teamovercome.net/p7500/?page_id=5 and check section ' Backin’ Up Yer Data & Apps…'
Sent from my GT-P7510 using XDA Premium HD app
No the firmware isnt available on sammobile. Maybe it would work if igot the csc-files for NSE and then update it OTA? But where do i get those?
I assume the celtic region covers Sweden? Last I checked it was covered under that.
Im currently on an UK-firmware and tyis is not right. The swedish one comes with some swedish bloatware. The uk one i have installed is 3.1. If i could only change the csc to nse instead of xeu as it says now I probably would get the rigt firmware OTA? i remember there was an 3.2 update OTA when i bought the Tab. Am i wrong with my theory, or you think it will work?
Flash a celtic region via Odin.
By celtic you mean?? Because i have flashed the uk/ireland firmware with odin and this doesn't contain the NSE csc.
Does anyone know where to get hold of csc files for either NSE or NEE?
Shouldnt they be included via SIM pack? Most sim's come preloaded with the carrier's APN and such
No. Those files are region codes in the samsung firmware. These files make the update-server decide which fw to send to the phone/tab.
Sent from my GT-I9100 using Tapatalk
But that shouldn't matter as sooner or later the ICS release will be one general update, It would be like IOS firmware, one general firmware for all regions. Region wise can be determined via IP Address as far as I know. When I had my tab flashed with a malaysian region firmware *Bought it online* as soon as It reached Middle East (where i received it) the update was available via Kies for Middle East update, and not the Asian firmware one.
Then again, why the hassle of kies, Odin for the win. Flashing different regional firmwares since 2007

[Q] PLEASE HELP ! Problem with CSC

Hello,
first, sorry for my Bad English...
So here is my Problem:
Bought S3 in Germany, also CSC = DBT
I flashed Omega V5.1 then i wanted back to origin Firmware, so i used TriangleAway and then flash the original Firmware with DBT (Downloaded it here in the Forum), now the Firmware is on the Phone, but KIES say it is not supportet...
KIES show CSC = EUR
How can this be? I flashed DBT, i can not change it with *#272*imei#, because there is only EUR to select
CAN PLEASE ANYBODY HELP ?!?!?
I recently wanted to change my csc to make my s3 updatable via KIES. Found that if I flashed to the UK (BTU) stock, when I did *#272*imei#, it presented me with many more options than my actual carrier stock.
I used to have an ATL CSC (Vodafone Spain) and I flashed my phone with the German firmware. After flashing it, I still had the ATL CSC but I did a hard reset and now it's DBT. So, I recommend you to do a hard reset but bear in mind you'll lose everything you have: SMS, contacts, etc.
Roastario said:
I recently wanted to change my csc to make my s3 updatable via KIES. Found that if I flashed to the UK (BTU) stock, when I did *#272*imei#, it presented me with many more options than my actual carrier stock.
Click to expand...
Click to collapse
Whst network were you on before?

[Q] Change of ROM and Unknown CSC

Hi, first post, but have been using all the helpful info from the forums for 6 months now with my TF201, this is related to my new i9300. I'll try to be as descriptive as I can:
Black i9300 purchased last week in the UK, but currently has the TGY (Hong Kong) CSC code. I tried flashing to the UK JB ROM on Sammobile but came back with an unknown CSC error. Fair enough. I followed some instructions i found to get to BTU CSC code:
Flash back to BTU ICS
Flash BTU CSC package
Use Galaxy CSC changer to select BTU
Reboot, now with a fully working ICS build, and BTU CSC (I9300OXAALF2).
However at this point i wasn't able to find any official OTA updates and Kies told me that my device was not compatible with kies updates.
Flashed the original JB UK ROM I downloaded and now i'm back with the unknown CSC.
Any ideas? I've already tried flashing the CSC package onto JB and that's not worked, so now i'm really stumped. As far as I can tell i've removed all HK CSC codes from my device as it was happy as BTU with ICS...
Thanks

Categories

Resources