Related
Now I know this question, in general, has been asked a lot. I've literally searched and tried the solutions in other threads, but this phone might be beyond help. I just want to know if someone has another solution as to how to revive this phone. I honestly think my situation is different than most....I downloaded and installed Team Hacksung's ICS 4.0.3 Build 6.1 ROM and I was using it just fine for a couple of months. Everything was working the whole time. Today, I am browsing through my local news station's app and my phone freezes on me! I pulled the battery and restarted the phone. It boots up fine and gets to the startup screen with the time and the screen lock. I did notice right away that the digitizer screen was not responding to my touch because I could not slide my lock over to get into my phone. I tried a few more soft resets and still nothing. I did notice, however, that the soft keys at the bottom did respond to my touch and they blinked and provided haptic feedback, so at this point I'm thinking it shouldn't be a problem with my digitizer. So I took the battery out then put the phone into recovery and wiped data, cache and dalvik. Then I rebooted the phone once again and still no response to touch at the home/lock screen. I then proceeded to try to reflash the same ICS ROM all over again and that's where the problem started. I can get into download mode and I've already tried to load stock froyo and stock gingerbread, but nothing works. My phone will not go past the "Samsung" boot-up screen. I've already tried several other forums' threads on how to recover a bricked Fascinate, but no matter what I try to load with Odin, Heimdall or anything else, my phone won't load past the Samsung screen. I can get into Download mode and that's it. My phone will not go into recovery using the 3-finger method. When I run odin I get a success message each time. I've even tried to heimdall the files individually and even tried to reload the stock kernel. The other problem I am running into is a lot of the links on these sites are all broken so I am unable to get the files I need. Has anyone else ever had this problem?
Edit: P.S. When the phone is off and on the charger, the grey battery shows the "loading" circle (whatever you call it) in the middle of it, but never converts to showing the green bars moving up and down indicating the battery is being charged. The loading circle is also frozen and does not spin.
im dizzy after reading a few sentences lol...check out my guide in the general section.
droidstyle said:
im dizzy after reading a few sentences lol...check out my guide in the general section.
Click to expand...
Click to collapse
Are you referring to http://forum.xda-developers.com/showthread.php?t=1238070?
If so, I just did it and it won't go past "Samsung."
Did you do check repartition and use the atlas pit file? That would be key, I believe, in returning you properly to stock.
Droidstyle's guide has all the working links you'll ever need.
http://forum.xda-developers.com/showthread.php?t=1238070
jawman27 said:
Did you do check repartition and use the atlas pit file? That would be key, I believe, in returning you properly to stock.
Droidstyle's guide has all the working links you'll ever need.
http://forum.xda-developers.com/showthread.php?t=1238070
Click to expand...
Click to collapse
I did check re-partition and yes I did load the atlas pit file. Still nothing.
e
So you tried heimdall? What commands did you do? and what rom?
also which links were dead that you needed?
mvmacd said:
So you tried heimdall? What commands did you do? and what rom?
also which links were dead that you needed?
Click to expand...
Click to collapse
I used heimdall front end to load DI01 files, I didn't use any commands. Also, I was just referring to "Unbrick your samsung fascinate" threads on other websites. A lot of the links I found were outdated or broken.
yea unfortunately not many guides have working links these days...Mine is about the only one left that is kept up to date. Im very suprised a full odin session did not fix your issues. One thing left to try is to odin a older stock package like DL09
Found here:
http://forum.xda-developers.com/showthread.php?t=1526488
Just tried pushing the DL09 file in odin AND in heimdall and neither worked. I still get stuck on the "Samsung" boot and it goes no further. Can't even get into recovery....
I think I truly have a brick...
kinna long shot
but why not try a different PC and a new or different cable.
believe me a faulty cable did me in, a week back and i was sure at the time that my phone is gone, but then it wasn't as bad as the impression i am getting from your description.
all the best with this , and hoping that something solves this issue.
god bless
haoleflip said:
Now I know this question, in general, has been asked a lot. I've literally searched and tried the solutions in other threads, but this phone might be beyond help. I just want to know if someone has another solution as to how to revive this phone. I honestly think my situation is different than most....I downloaded and installed Team Hacksung's ICS 4.0.3 Build 6.1 ROM and I was using it just fine for a couple of months.....
Click to expand...
Click to collapse
I am having a similiar problem now. I was able to odin an older CWM (3.0 blue I got somewhere). From there I mounted usb and loaded ext4_formatter_all.zip. I ran this script and odin'd dh03 and finally got back to stock. That's where I am now.
Hope this helps
kduffman said:
I am having a similiar problem now. I was able to odin an older CWM (3.0 blue I got somewhere). From there I mounted usb and loaded ext4_formatter_all.zip. I ran this script and odin'd dh03 and finally got back to stock. That's where I am now.
Hope this helps
Click to expand...
Click to collapse
I have a blue recovery [3.x, voodoo], here it is if the OP wishes to try it.
[Use Heimdall and select recovery]
cwm3_voodoo-blue.bin http://www.mediafire.com/?4ls06x8gha88vtp
cwm4-bml-i500-fascinate.bin http://www.mediafire.com/?2ny1ql66yh69bn3
35c31418dbe9a9db70de954cdf7369ef cwm3_voodoo-blue.bin
05f3e376ca697fd0fb8700dea05254aa cwm4-bml-i500-fascinate.bin
I threw in an extra 4.x cwm for good measure, lol. [I saved these in a folder in case I ever needed them..I was going to delete the folder since I upgraded to THS ICS rom (build 7.1), but I decided not to delete them for some reason]
it seems OP sounds like he knows what he is talking about, but lets start simple.
Have you tried going all the way back to 100% stock?
In droidstlyes FANTASTIC guide
do section 5, perhaps try with out repartition or the atlas....that has worked for me in the past.
I know on my THS ICS 7.1 build i had a "sleep of death" (wouldnt wake up) and i was lazy and did the 3 finger salute and it would ONLY boot into CWM. a battery pop would have been fine but like i said i was lazy. i had to Odin back to stock in order to re-flash everything. [luckily i had a nandroid from a few days earlier]
Good Luck
Edit: I have never seen or heard of a fassy that CAN get into Download mode and not be recovered to 100% functional.
I'm just thinking out loud here, but here are two things to consider. Perhaps the senior members will comment.
1. Have you considered flashing a different bootloader?
2. Is it possible you have a corrupt stock and/or pit file? Have you tried re-downloading them and giving it another go?
OP, can you post the md5sums of the files, along with the filenames that you are using in Odin/Heimdall?
thanks
Well, I ended up getting a droid bionic from a friend, so I will turn this fassy into a project phone. If I can get it to work I will sell it or keep it for backup. Anyway...
I have not tried the older blue recovery yet. I will try that when I get back to my computer. It seems like I've gone beyond anything I've ever had to try with this phone. I read on one thread that if odin did not work, keep trying heimdall over and over until the phone boots up. I must have tried at least 8 times on one run. It still won't go past samsung screen. I can get into download just fine. No matter how many different cwms I try, I can't get into recovery using the three finger method. Im pretty knowledgeable when it comes to this stuff and I didn't flash the wrong rom or kernel or anything like that. I was running smoothly on an ics rom until my phone froze. I did have it overclocked with ns tools, but not at the time the phone froze. I honestly don't think its hardware related, but merely a glitch in the software or a bad kernel that does not want to come out? I have no clue....help me revive this baby lol...
Sent from my DROID BIONIC using Tapatalk
jawman27 said:
I'm just thinking out loud here, but here are two things to consider. Perhaps the senior members will comment.
1. Have you considered flashing a different bootloader?
2. Is it possible you have a corrupt stock and/or pit file? Have you tried re-downloading them and giving it another go?
Click to expand...
Click to collapse
I've tried different pit files from different threads. Even the one from droidstyle's thread. I've also tried different versions of the following stock files from different "known" and trusted sites: DI01, DL09, ED01, EB01, EH03, CM7, CM9 other ICS roms and different kernels that suit each both voodoo and non voodoo. And excuse my newbness on the terms, but what do you mean by flashing a new bootloader?
Sent from my DROID BIONIC using Tapatalk
haoleflip said:
... but what do you mean by flashing a new bootloader?
Sent from my DROID BIONIC using Tapatalk
Click to expand...
Click to collapse
Bootloaders can be flashed in Odin the same way a ROM can. A bootloader is the rudimentary software that gets the other software up and running. When Glitch's kernel started requiring Gingerbread bootloaders for complete functionality, a lot of us realized that just having GB didn't mean you had GB bootloaders.
http://www.mediafire.com/?fqojvsynkff93hc
Hopefully this link will work. It's certainly worth a try. It doesn't seem like you have much to lose. I'd recommend flashing it the exact same way you do a ROM. There's a bootloader section in Odin, but most people avoid it. Good luck.
Hello all,
I have a question that has not been answered after many hours of searching. Hopefully I'm just dumb, and my buddy's stock firmware and data isn't hosed. I'm trying to get his stock firmware running again so I can back it up safely.
What I've done:
Tried to flash CWM's update.zip via stock recovery (signature verification failed on the three different zip's I could find in the forums and various links)
Used Heimdall to push "cmenard-T959-CWM" zImage (this worked, and I get a different screen at boot)
The phone boots to the point of the T-Mobile splash screen with the annoying shriek sound, but goes to a black screen after. If i touch any of the soft buttons, they light up and remain lit. It'll stay like that for at least 20 minutes.
Is it possible to re-flash the system partition and not the data partitions using ODIN? Is that even feasible? Like I mentioned above, I'd like to get the stock firmware running such that I can make a good backup of it with all the user data intact. I haven't been able to because the CWM+root wouldn't flash.
Any suggestions or insight would be greatly appreciated.
thanks in advance!
Well as long as you don't format the internal SD, any pictures and videos and things should remain intact.
Here is a similar thread. See if it resembles your issue.
http://forum.xda-developers.com/archive/index.php/t-794869.html
Toast6977 said:
Well as long as you don't format the internal SD, any pictures and videos and things should remain intact.
Here is a similar thread. See if it resembles your issue.
http://forum.xda-developers.com/archive/index.php/t-794869.html
Click to expand...
Click to collapse
Thanks for the suggestion, Toast. I don't believe the internal SD has been messed with, and I don't plan to mess with it either. The thread you linked is not quite related to my issue, as far as I can tell.
I am able to get into Download Mode, and the Stock Recovery mode as well. However every time I try to flash an 'update.zip' with the Stock Recovery, I get an error about Signature Verification Failure.
After stepping back from it for a day, I think I've gained some clarity. Since all I've done is flash a different Kernel with Heimdall, I'm going to try to flash a stock kernel then see what happens.
Is this phone on stock Froyo or have you got it back to JFD (eclair)?
If Froyo, that's the problem. Using Odin back to Eclair and run update.zip. It won't work from stock Froyo.
*-*- I made some assumptions in my previous post. The shrieking sound. Black screen. Lights stay lit. Sounded like a poltergeist.
Glad you can get in download mode and recovery.
The old 2E vs 3E problem. Nice catch Toast
Give this a whirl: recovery 3e modified to work like recovery 2e
Might have to ABD push it to your internal SD card though.
Toast6977 said:
Is this phone on stock Froyo or have you got it back to JFD (eclair)?
If Froyo, that's the problem. Using Odin back to Eclair and run update.zip. It won't work from stock Froyo.
*-*- I made some assumptions in my previous post. The shrieking sound. Black screen. Lights stay lit. Sounded like a poltergeist.
Glad you can get in download mode and recovery.
Click to expand...
Click to collapse
Woodrube said:
The old 2E vs 3E problem. Nice catch Toast
Give this a whirl: recovery 3e modified to work like recovery 2e
Might have to ABD push it to your internal SD card though.
Click to expand...
Click to collapse
hahaha poltergeist!
Wow, so I'm glad I asked. I wouldn't have known about this issue, as I do not have any history with this device.
I know that the ROM is currently 2.2, and the Android System Recovery is showing "3e".
If I understand correctly, once I'm ready to flash up to ICS, I'll need to ODIN back to 2.1 to get Android System Recovery "2e", which will let me flash 'update.zip' packages freely. Then I flash an 'update.zip' to get CWM, then flash CM7, then CM9 (and CM9 is my intended destination).
The things mentioned in the thread you linked do appear to apply to my situation.
However I still want to get the stock OS booted and working, then do a Nandroid backup of it. (it's the computer tech/security pro in me. Since I'm new to this device, I -tried- to read up on everything first, and didn't want to make a change without being sure it would work.)
Does anyone happen to know if flashing a stock kernel over the 'cmenard' kernel will harm anything, and hopefully get a successful boot? Again, I'm trying to get the stock ROM booting again in order to verify I have everything I need off of it, then do a nandroid backup. Flashing to CM9 will come afterwards.
Ok, here are some things for you.
Here is a kernel pack that you can use. Read the OP because there are Froyo AND Gingerbread kernels in there.
[KERNELS] Moped_Ryder SGS Kernel Pack v2 [20+ Froyo/GB Kernels]
I really suggest using something like BaliX 1.2 or BaliUV kernels to make your back up. They are smooth, fast and OC/UV-able. To flash just Wipe /cache, /dalvik -> flash kernel -> Wipe /cache, /dalvik (I also fix permissions too bc that is the way that I learned and I just do it that way all the time). Reboot and Bam!! you should be able to get to the point that you can make a backup.
Look in my signature, there are downloads and flashables that are direct download linked. There is also an ICS install guide that can help your journey. Once you have your backup, then use Odin from the Toolbox in my signature and flash back to stock JFD. From there you will be able to follow my guide.
If you need any files, just let me know and I will upload them when I get home (won't be until late though, i have plans right after work).
Using HB, can I choose any theme? I am not so acquainted with the Theme chooser and boot animation of my phone. I flashed a boot animation zip yesterday and it was stuck in "ANDROID" screen. So I have to flash again. I never used any boot animation and themes in my phone yet. I want to know about them.
Sent from my SGH-T959 using xda app-developers app
Wrong thread. Put that question in the Jelly Bean Banter thread. No need to hijack this thread until we get OP up and running.
Ugh, so I've been on vacation for a while, and since being back I've been super freaking busy =(
Finally spent some time with the phone tonight. Took some fiddling to get the right drivers working for the phone on my Win7x64 laptop.
In any case, I checked out that Kernel thread, and extracted the Bali kernel. Since I had flashed successfully(?) with Heimdall at first, and I'm becoming more familiar with it, I used it to flash the Bali_1.8.8-zImage. That appeared to work, as I get a new boot screen/animation with the Bali logo.
However, after the Bali logo disappears, the T-Mobile animation+sound plays, and then gives me a black screen. The screen is on (backlight is on) but all black. Also, if I touch a soft-button, they'll light up and the phone will remain in that state for as long as I can stand to wait. (one episode of Archer)
So, it's doing the same thing as before, but with a new boot logo/animation.
I wonder if something else in the ROM has been messed up? Should I forget trying to save it, and just use ODIN to flash a whole new rom/kernel package? I'll talk to the owner tomorrow and see if he's now willing to do that.
I also wonder if I was wrong to use Heimdall again, instead of using the CWM method. Please correct me if I'm wrong, but I think those two methods end up doing the exact same thing. Is one method more reliable than the other?
Bah, this sucks; I have more questions than answers at this point =( Any ideas, Woodrube, Toast?
maxpeet said:
Ugh, so I've been on vacation for a while, and since being back I've been super freaking busy =(
Finally spent some time with the phone tonight. Took some fiddling to get the right drivers working for the phone on my Win7x64 laptop.
In any case, I checked out that Kernel thread, and extracted the Bali kernel. Since I had flashed successfully(?) with Heimdall at first, and I'm becoming more familiar with it, I used it to flash the Bali_1.8.8-zImage. That appeared to work, as I get a new boot screen/animation with the Bali logo.
However, after the Bali logo disappears, the T-Mobile animation+sound plays, and then gives me a black screen. The screen is on (backlight is on) but all black. Also, if I touch a soft-button, they'll light up and the phone will remain in that state for as long as I can stand to wait. (one episode of Archer)
So, it's doing the same thing as before, but with a new boot logo/animation.
I wonder if something else in the ROM has been messed up? Should I forget trying to save it, and just use ODIN to flash a whole new rom/kernel package? I'll talk to the owner tomorrow and see if he's now willing to do that.
I also wonder if I was wrong to use Heimdall again, instead of using the CWM method. Please correct me if I'm wrong, but I think those two methods end up doing the exact same thing. Is one method more reliable than the other?
Bah, this sucks; I have more questions than answers at this point =( Any ideas, Woodrube, Toast?
Click to expand...
Click to collapse
Wrong they are not the same. cwm can do the work without a PC beside you can erase, back up , restore and flash, which make our life easier, heimdall or Odin ," I prefer odin "are the last option when you can't fix it with cwm
To fix your phone use Odin or heimdall and go back to stock don't worry all your files, photo, music, will be safe. Then
1 get root on you , if you don't how ask
2 get cWm
3 do a nandroid back up
4 have fun flashing all roms you want lol
Sent from my SGH-T989 using xda app-developers app
Yeah, I would just Odin back to stock JFD w/ repartition checked...
Then I'd flash something real stable for him. There are lots of stable ROMs to choose from. I used Bionix V for a long time before moving onto Jelly Bean.
Since the phone belongs to someone else, I'd stick with something lower than JB though. 911 can have/has issues.
Toast6977 said:
Yeah, I would just Odin back to stock JFD w/ repartition checked...
Then I'd flash something real stable for him. There are lots of stable ROMs to choose from. I used Bionix V for a long time before moving onto Jelly Bean.
Since the phone belongs to someone else, I'd stick with something lower than JB though. 911 can have/has issues.
Click to expand...
Click to collapse
do no check de re-partition button and use a .pit file follow this tutorial and you will be fine
http://forum.xda-developers.com/showthread.php?t=848737
Hello first time rooting this phone. Its a SGH-I777. I used the guide from galaxys2root.com/. At first it didnt work because my computer didnt recongnize my phone. I tried a different computer and it seemed successful until it rebooted. When the phone rebooted it did nothing but stay on the first screen. I still have the ability to get into Odin mode(download mode), but that is it. When i put the phone in download mode and use Odin it allows me to download the "zimage" but after rebooting it is the same exact thing. I have tried the one click root, one click factory restore. Tried restoring it on Kies. and nothing work took it to a store and the guy said he tried but it would stop in the middle of the download the only option i had with him was purchasing a new mother board for $80. Does anyone have a solution that can help me fix my phone.
Before i attempted to root it, it had OS 2.3.6 with kernal 2.6.35.7.
Go to the development section and read the stickies. There you will find stock rooted packages you can flash with Odin.
Sent from my SGH-I777 using xda premium
@jmula,
Enter recovery and perform a wipe data/factory reset. That may clear the failure to boot. If not you'll need to flash back to stock and start over.
The yellow trangle is a result of flashing a custom kernel using Odin or Heimdall, and is expected. You are not the first person having problems with the tools provided by GalaxyS2Root. In the future, I would recommend you avoid his site.
And... as suggested, read and study till you understand the basics. Then if you have questions, feel free to ask.
creepyncrawly said:
@jmula,
Enter recovery and perform a wipe data/factory reset. That may clear the failure to boot. If not you'll need to flash back to stock and start over.
The yellow trangle is a result of flashing a custom kernel using Odin or Heimdall, and is expected. You are not the first person having problems with the tools provided by GalaxyS2Root. In the future, I would recommend you avoid his site.
And... as suggested, read and study till you understand the basics. Then if you have questions, feel free to ask.
Click to expand...
Click to collapse
the only option that i have is to put the phone in download mode. when i try to download any kernel it reboots and does not go past the booting screen with the triangle.
jmula said:
the only option that i have is to put the phone in download mode. when i try to download any kernel it reboots and does not go past the booting screen with the triangle.
Click to expand...
Click to collapse
You should be able to enter recovery. Hold down all three buttons, vol+ vol- and pwr, continuously until the phone boots into recovery. It could take 10 or 15 seconds or more. If that is unsuccessful, then since you can enter download mode, you will need to flash back to stock, or stock plus root. That is not just a kernel, but the entire package. Please see the links in my sig for instructions.
The dropbox links in the download repository are temporarily suspended until probably Monday night or Tuesday as someone abused and over-downloaded. But the hotfile links still work.
creepyncrawly said:
You should be able to enter recovery. Hold down all three buttons, vol+ vol- and pwr, continuously until the phone boots into recovery. It could take 10 or 15 seconds or more. If that is unsuccessful, then since you can enter download mode, you will need to flash back to stock, or stock plus root. That is not just a kernel, but the entire package. Please see the links in my sig for instructions.
The dropbox links in the download repository are temporarily suspended until probably Monday night or Tuesday as someone abused and over-downloaded. But the hotfile links still work.
Click to expand...
Click to collapse
i Downloaded ''UCLE5 Stock ICS plus Root'' . i placed the phone in download mode started Odin and placed file in PDA. It starts but gets stuck at cache.img
jmula said:
i Downloaded ''UCLE5 Stock ICS plus Root'' . i placed the phone in download mode started Odin and placed file in PDA. It starts but gets stuck at cache.img
Click to expand...
Click to collapse
The next thing I would suggest is to try and flash the UCKH7 full stock package with bootloaders. However, as the dropbox links in the download repository are currently suspended, you will have to download it from SamFirmware. To be able to download, you will need to register for free if you havn't already. Search sgh-i777 in the upper right hand corner of the page, then download the I777UCKH7 version. Let us know if that will flash.
Ok it finally wokred after countless times of changing usb ports. I used the one click recovery. It restroed my phone to 2.3.4 i had 2.3.6. I tried to update by kies to 4.01 and it didnt work. Kies froze. The queestion is how do i safltey root the phone?
jmula said:
Ok it finally wokred after countless times of changing usb ports. I used the one click recovery. It restroed my phone to 2.3.4 i had 2.3.6. I tried to update by kies to 4.01 and it didnt work. Kies froze. The queestion is how do i safltey root the phone?
Click to expand...
Click to collapse
Flash a .tar version of a custom kernel with Odin. I always use an old siyah.tar, but that's just me. There are other methods floating around but that's the quickest and easiest for me. I think there's an old entropy dd.tar around somewhere too. But just flash it through Odin and you're good to go, assuming you flashed one for your version of android. If you just want to get into recovery to flash something this works as well.
There may be links to tar versions of the kernels in creepy's sig I don't remember offhand.
Ok since i do not want to brick my phone again where it is just stuck at the boot loop. I tried looking for ways to root and when i tried some of them my phone went back to the problem it had it the beginning. Should i just call it quits or do you guys have a guide?
jmula said:
Ok since i do not want to brick my phone again where it is just stuck at the boot loop. I tried looking for ways to root and when i tried some of them my phone went back to the problem it had it the beginning. Should i just call it quits or do you guys have a guide?
Click to expand...
Click to collapse
Give up???
I personally don't think flashing a kernel with odin is the best way to root. It increments the flash counter, for one thing, though I'm not sure how many people care about that anymore. I would suggest that you use the stock plus root package to root the phone with odin. See the links in my sig.
Guide... did someone say guide?
Feeling the pain....
creepyncrawly said:
@jmula,
Enter recovery and perform a wipe data/factory reset. That may clear the failure to boot. If not you'll need to flash back to stock and start over.
The yellow trangle is a result of flashing a custom kernel using Odin or Heimdall, and is expected. You are not the first person having problems with the tools provided by GalaxyS2Root. In the future, I would recommend you avoid his site.
And... as suggested, read and study till you understand the basics. Then if you have questions, feel free to ask.
Click to expand...
Click to collapse
First, to Creepy....you've been a great resource here and I read a lot of what you post and you got me out of the very jam being discussed here. I made the mistake of trying to root via the galaxys2root.com site (actually, I thought it was a different site...was redirected), got the i9100 screen and a boot loop...couldn't go anywhere. I came back here and found resources eventually unrooting my phone all the way back to 2.3.4, then moved to 2.3.6, then the stock android 4.0.3 which updated to 4.0.4.
But I still want to root (4.0.4 shuts itself down A LOT...more than 4.0.3) and I have a Galaxy note 10.1 with JB 4.1.2 and I LOVE IT! I feel on a mission to get rooted and try out some of the JB roms I see talked about here, but can't seem to find the best way to root. I've heard exynosabuse referenced here (no links to it though) and I don't want to use the wrong one and mess up my phone. I've been reading for weeks here and there's obviously a lot of great material, but I'm not sure which material is critical to understand, and which is "nice to know" but might not even apply, and which material isn't even right. Very frustrating.
Judi
judib said:
First, to Creepy....you've been a great resource here and I read a lot of what you post and you got me out of the very jam being discussed here. I made the mistake of trying to root via the galaxys2root.com site (actually, I thought it was a different site...was redirected), got the i9100 screen and a boot loop...couldn't go anywhere. I came back here and found resources eventually unrooting my phone all the way back to 2.3.4, then moved to 2.3.6, then the stock android 4.0.3 which updated to 4.0.4.
But I still want to root (4.0.4 shuts itself down A LOT...more than 4.0.3) and I have a Galaxy note 10.1 with JB 4.1.2 and I LOVE IT! I feel on a mission to get rooted and try out some of the JB roms I see talked about here, but can't seem to find the best way to root. I've heard exynosabuse referenced here (no links to it though) and I don't want to use the wrong one and mess up my phone. I've been reading for weeks here and there's obviously a lot of great material, but I'm not sure which material is critical to understand, and which is "nice to know" but might not even apply, and which material isn't even right. Very frustrating.
Judi
Click to expand...
Click to collapse
The ExynosAbuse application is the only practical way to root 4.0.4 without changing base. You can download it as an attachment in the OP of the developer's thread, but read through the thread first to understand its limitations and risks.
Alternatively, you could flash 4.0.3 plus root from the development forum. If you choose that route, please read the thread to understand how to install a custom kernel, which is recommended whether you plan to install a custom firmware or not. The custom kernel will contain ClockworkMod Recovery so you can flash the firmware of your choice if you wish.
There are really several routes you could choose. All of them work. Another would be to flash back to stock Gingerbread plus root. For that see my guide How to Flash Custom Binaries Without Ever Incrementing the Flash counter!! (link in sig)
Hmmmmm..
Well, I see that their are many, more experienced than me following this thread and my following comment is not meant to jump on the knowledge train here, but............... I had the same event happen as the orig poster earlier today. I had installed an app,I then rebooted and it got a bit stuck on the Galaxy SII, What I did was go into recovery ,cleared the Dalvik cache and that is all I cleared. Then I re-installed the RR Rom .rar, which I keep on my SD, over everything and rebooted, it came back as it was 4 mins before . All I did after, was do a system restore(only) using Titanium BU. So when I see all the "clear and restore this and that" I started to doubt some of the more experienced than I. My 2 cents is, that, if one does not know EXACTLY ,how to correct an issue,leave it for our more knowledgeable brothers and sisters.
If I am wrong ,please except my appology.
b0bb said:
Well, I see that their are many, more experienced than me following this thread and my following comment is not meant to jump on the knowledge train here, but............... I had the same event happen as the orig poster earlier today. I had installed an app,I then rebooted and it got a bit stuck on the Galaxy SII, What I did was go into recovery ,cleared the Dalvik cache and that is all I cleared. Then I re-installed the RR Rom .rar, which I keep on my SD, over everything and rebooted, it came back as it was 4 mins before . All I did after, was do a system restore(only) using Titanium BU. So when I see all the "clear and restore this and that" I started to doubt some of the more experienced than I. My 2 cents is, that, if one does not know EXACTLY ,how to correct an issue,leave it for our more knowledgeable brothers and sisters.
If I am wrong ,please except my appology.
Click to expand...
Click to collapse
I don't know what you're trying to get across here. Yes, restoring a backup nandroid works. Yes, you can try wiping cache and dalvik to see if it fixes an issue. Yes you can restore apps via titanium backup. All these things are indeed true.
Phalanx7621 said:
I don't know what you're trying to get across here. Yes, restoring a backup nandroid works. Yes, you can try wiping cache and dalvik to see if it fixes an issue. Yes you can restore apps via titanium backup. All these things are indeed true.
Click to expand...
Click to collapse
Well if you did not fully grasp what I was trying to get across,you seemed to get it correct with your statement.
b0bb said:
Well if you did not fully grasp what I was trying to get across,you seemed to get it correct with your statement.
Click to expand...
Click to collapse
And yet you say, "All I did after, was do a system restore(only) using Titanium BU." This may have worked for you, but this is an absolute recipe for disaster, and should not be given as a recommendation.
And further, from what you say, you did not have the "same event happen as the orig poster." Instead you "had installed an app,I then rebooted and it got a bit stuck on the Galaxy SII." This is by far not the same as trying to root with a tool from GalaxyS2Root.
creepyncrawly said:
And yet you say, "All I did after, was do a system restore(only) using Titanium BU." This may have worked for you, but this is an absolute recipe for disaster, and should not be given as a recommendation.
And further, from what you say, you did not have the "same event happen as the orig poster." Instead you "had installed an app,I then rebooted and it got a bit stuck on the Galaxy SII." This is by far not the same as trying to root with a tool from GalaxyS2Root.
Click to expand...
Click to collapse
Hey Bro, I think you think that I am challenging you, trust me I am not and I thank you for correcting me and putting me in my place, which is a bit phone techie challenged, I'll stick to building submarines. Thanks for what you do here.
b0bb said:
Hey Bro, I think you think that I am challenging you, trust me I am not and I thank you for correcting me and putting me in my place, which is a bit phone techie challenged, I'll stick to building submarines. Thanks for what you do here.
Click to expand...
Click to collapse
Not at all. I want people to help others here. I want you to help other here as well. But it is important to post only accurate information. Inaccurate information can cause someone to do the wrong action. So I always correct misinformation.
I let my galaxy tab 10.1 die completely and it sat for several months without being used. When I turned it on, it was stuck in a bootloop. Tried to do a factory reset but, it would freeze in the middle of the reset. I really don't want to spend $150 to send this to Samsung for them to do something I can possibly do myself.
Is this a common issue with these things?
I have seen several forums and youtube videos where flashing was required to fix this problem, is this the only way to fix this problem?
Where can I download ODIN without all the other crap that some of these sites are trying to pass off as ODIN?
Step by step instructions would be helpful as I am not computer stupid, but have never done something like this before...
misschrissy1225 said:
I let my galaxy tab 10.1 die completely and it sat for several months without being used. When I turned it on, it was stuck in a bootloop. Tried to do a factory reset but, it would freeze in the middle of the reset. I really don't want to spend $150 to send this to Samsung for them to do something I can possibly do myself.
Is this a common issue with these things?
I have seen several forums and youtube videos where flashing was required to fix this problem, is this the only way to fix this problem?
Where can I download ODIN without all the other crap that some of these sites are trying to pass off as ODIN?
Step by step instructions would be helpful as I am not computer stupid, but have never done something like this before...
Click to expand...
Click to collapse
1. Let it fully charged
2. If you never flashed a custom recovery, do the factory reset again through the stock recovery mode. That should do it.
3. If you are rooted, get odin [http://odindownload.com/],
get a custom Recovery e.g. [http://forum.xda-developers.com/showthread.php?t=1733045], install it using ODIN
4. Extra, install a custom ROM e.g. nameless [http://forum.xda-developers.com/showthread.php?t=2716016] or the stock ROM [http://forum.xda-developers.com/gal...wnload-link-samsung-galaxy-tab-10-1-t2807422]
rafsyam said:
1. Let it fully charged
2. If you never flashed a custom recovery, do the factory reset again through the stock recovery mode. That should do it.
3. If you are rooted, get odin [http://odindownload.com/],
get a custom Recovery e.g. [http://forum.xda-developers.com/showthread.php?t=1733045], install it using ODIN
4. Extra, install a custom ROM e.g. nameless [http://forum.xda-developers.com/showthread.php?t=2716016] or the stock ROM [http://forum.xda-developers.com/gal...wnload-link-samsung-galaxy-tab-10-1-t2807422]
Click to expand...
Click to collapse
Thanks for the reply:
this is not a rooted device. How do I do the factory reset through the stock recovery mode? I am sure it's what I have tried several times and it still freezes in the middle of the recovery. I have gotten as far as putting in the date and time and then... nada back to where I have started. I am a noob, sorry
misschrissy1225 said:
Thanks for the reply:
this is not a rooted device. How do I do the factory reset through the stock recovery mode? I am sure it's what I have tried several times and it still freezes in the middle of the recovery. I have gotten as far as putting in the date and time and then... nada back to where I have started. I am a noob, sorry
Click to expand...
Click to collapse
Stuck in the bootloop also, saw this post so asking here first. I'm going to do some more searching, but if I flash the ROM will I lose all photos, music, videos and the sort? Don't care about the apps, just the data. I don't have an SD Card on this thing which I keep reading on other posts some folks have. It's a P7510 32 GB Wifi Only.
I'm trying to get the user files off a phone with corrupted cache. When booted normally, it gets stuck on the white T-Mobile splash screen. When booting into recovery, I get an error about the cache and the phone restarts without loading into recovery. Screenshots attached.
I can get into download mode fine.
Using Odin to flash a custom recovery gives me the PASS message, but when I restart the phone, the stock recovery is still there with the same error message. I've tried TWRP and CWM.
I am hesitant to try flashing a custom ROM because I don't want to lose the data. The phone is not important, but the data is.
firstrival said:
I'm trying to get the user files off a phone with corrupted cache. When booted normally, it gets stuck on the white T-Mobile splash screen. When booting into recovery, I get an error about the cache and the phone restarts without loading into recovery. Screenshots attached.
I can get into download mode fine.
Using Odin to flash a custom recovery gives me the PASS message, but when I restart the phone, the stock recovery is still there with the same error message. I've tried TWRP and CWM.
I am hesitant to try flashing a custom ROM because I don't want to lose the data. The phone is not important, but the data is.
Click to expand...
Click to collapse
Dont try flashing a custom ROM on to the phone. Try flash the stock ROM through the lastest odin with the lastest drivers and let me know how that works out for ya. Unless that wipes the phone ( havent used it in quite some time) then I have no idea man.
I tried flashing the T399UVUAMJ4 ROM throught Odin. It went through the entire process and rebooted, but nothing changed. Does this mean the bootloader is locked?
firstrival said:
I tried flashing the T399UVUAMJ4 ROM throught Odin. It went through the entire process and rebooted, but nothing changed. Does this mean the bootloader is locked?
Click to expand...
Click to collapse
I'm not sure maybe want to ask someone else I'm not as experienced as some people on here. Sorry man goodluck
I hope someone can help you out. I would say your cache partition somehow got renamed but I'm not sure if thats possible and if so how to fix it. Maybe someone with ADB knowledge can help?
Also what TWRP were you trying to install? I've had problems when I tried to flash older versions
okay so here is a site with the original firmware for the phone. It has both the t399 and the t399n for odin. It has them labeled so its not too confusing lol. http://forum.gsmhosting.com/vbb/f200/samsung-t399n-metro-pcs-firmware-here-1899016/
find the one for the t399, flash it with odin. this will fully restore your phone. HOPEFULLY it will be able to save the data. I know you said you did this before but I'm not sure if it was just system or everything like here.
kireflow90 said:
okay so here is a site with the original firmware for the phone. It has both the t399 and the t399n for odin. It has them labeled so its not too confusing lol. http://forum.gsmhosting.com/vbb/f200/samsung-t399n-metro-pcs-firmware-here-1899016/
find the one for the t399, flash it with odin. this will fully restore your phone. HOPEFULLY it will be able to save the data. I know you said you did this before but I'm not sure if it was just system or everything like here.
Click to expand...
Click to collapse
So I tried the T399 files. Flashed with no errors, but when it reboots everything is still the same. I've even tried flashing from another computer. Mind boggling!
firstrival said:
So I tried the T399 files. Flashed with no errors, but when it reboots everything is still the same. I've even tried flashing from another computer. Mind boggling!
Click to expand...
Click to collapse
Thanks for the quick reply. Its a shame to hear that it didn't work
How did you come to this? as to me it seems the partions have be modified hence why giving those errors I seen similar errors to when users change cache sizes which tends to brick device or from using incorrect pit files.
You never be able to recover data from flashing Odin may be slim chance by custom Rom thru recovery if was a bkup of original system and not selecting data your old data may conflict causing either bootloop or basically stuck on splash screen.
If you was ever able to best way to pull data from device would be thru adb may have a chance.
This phone belongs to a friend of a friend. They said they brought it to T-Mo because it hung up during boot. The store worked on it for a few minutes, but couldn't get it to boot up either. When I tried to go into recovery, they said the store already went into that screen too. They have since bought a new phone, but would like to get the photos off it if possible. They never had an SD card so it's still on the device.
At the moment, I can just go into download mode. I was hoping to flash a custom recovery so I might possibly be able to ADB from there since it won't load the stock recovery.
I have a very similar issue but without "cache error messages". The phone (Samsung Galaxy Light with stock ROM and TWRP) just reboots no matter what I try to flash into it.
It does it while "drawing" the Samsung Logo animation (blue ring that gets created revealing the word samsung), so after the white wrintings of the phone name.
My attempts so far:
1. Flashed newer version of TWRP
2. Flashed CWM
3. Flashed two different versions of stock ROM (the original one and the one that T-Mobile released when upgraded to latest jelly Bean)
4. Flashed a custom ROM (Light ROM found here which is based on the stock one).
EVERY TIME the outcome was the same:
Phone reboots right after the phone name (written in white) while the Samsung animation starts. It just stops while the blue oval begins to appear. If I try to boot into recovery (via home/power/volume up combo) it shows the TWRP splash screen but it reboots right after and this happened even after I flashed (successfully according to Odin) CWM.
It really looks like I did nothing so far but I can assure it's not the first time I use Odin (4 different versions) to flash a custom recovery or a ROM. I did it successfully on other 4 different phones (all samsung).
On this same phone I did it the first time when flashed TWRP in order to root it via recovery.
I have no idea what to do next. I was thinking about using adb in order to wipe all the caches (dalvik included) but it looks like the phone can't be recognized unless I boot it into recovery mode (adb get-state returns "unknown") and I don't think I can do anything in Download mode which is the only mode I can enter apparently.
I was hoping someone here can help me to spare some money buying a new phone for my wife and tossing this one which is the best for its small size imho.
Thank you in advance to anyone interested in at least shading some light on what could have happened. This started to happen out of the blue and the last time I actively modified something (updating the recovery) was almost one year ago... It always worked like a charm until 4 days ago...
EDIT: To clarify: the reason why I posted here is because this looked like a problem the most similar to mine (boot loop or stuck at boot and can't enter either regular or recovery mode). I cannot create new posts due to my low "rank" yet... Please feel free to move this if you think it belongs to a separate thread.
fulgorevinnie said:
I have a very similar issue but without "cache error messages". The phone (Samsung Galaxy Light with stock ROM and TWRP) just reboots no matter what I try to flash into it.
It does it while "drawing" the Samsung Logo animation (blue ring that gets created revealing the word samsung), so after the white wrintings of the phone name.
My attempts so far:
1. Flashed newer version of TWRP
2. Flashed CWM
3. Flashed two different versions of stock ROM (the original one and the one that T-Mobile released when upgraded to latest jelly Bean)
4. Flashed a custom ROM (Light ROM found here which is based on the stock one).
EVERY TIME the outcome was the same:
Phone reboots right after the phone name (written in white) while the Samsung animation starts. It just stops while the blue oval begins to appear. If I try to boot into recovery (via home/power/volume up combo) it shows the TWRP splash screen but it reboots right after and this happened even after I flashed (successfully according to Odin) CWM.
It really looks like I did nothing so far but I can assure it's not the first time I use Odin (4 different versions) to flash a custom recovery or a ROM. I did it successfully on other 4 different phones (all samsung).
On this same phone I did it the first time when flashed TWRP in order to root it via recovery.
I have no idea what to do next. I was thinking about using adb in order to wipe all the caches (dalvik included) but it looks like the phone can't be recognized unless I boot it into recovery mode (adb get-state returns "unknown") and I don't think I can do anything in Download mode which is the only mode I can enter apparently.
I was hoping someone here can help me to spare some money buying a new phone for my wife and tossing this one which is the best for its small size imho.
Thank you in advance to anyone interested in at least shading some light on what could have happened. This started to happen out of the blue and the last time I actively modified something (updating the recovery) was almost one year ago... It always worked like a charm until 4 days ago...
EDIT: To clarify: the reason why I posted here is because this looked like a problem the most similar to mine (boot loop or stuck at boot and can't enter either regular or recovery mode). I cannot create new posts due to my low "rank" yet... Please feel free to move this if you think it belongs to a separate thread.
Click to expand...
Click to collapse
ok so i read all that you have done which is basically everything i would of suggested to you other then could it be the battery may be faulty just random thought noticed you never mentioned trying kies you may have a chance with it beening detected as i see you can enter download mode so that help with odin also kies also have you tried firmware from here sam mobile here T399 or T399N OH2 lastest for tmo and OH3 for metro.
Try to only flash that thru odin i use 3.07 or 3.09 only difference is the pda button changes to AP .works perfect for me so i suggest it then returning back to stock recovery/firmware if it boots then awesome. then return to TWRP 2.8.4.0 beening lastest for this device also needed for CM12 also my projects for device current and future.
when using odin make sure that only “Auto Reboot” and “F. Reset Time” options are selected.
also just note when going into twrp release buttons as soon as you see logo otherwise it will continue to boot thru well happens to me when daydreaming lol.
also if your seeing this adb get-state returns "unknown" i believe installing kies may install the drivers for detection im not postive on that but im sure it something to do with missing the adb driver for device maybe another dev can confirm this ?
hopefully this may be of some help i keep on thread to see how the outcome goes
Thanks for the reply DJBoxer!
Regarding the battery it's a new one and I can confirm it's not a battery problem considering that the phone can stay in download mode and unplugged from any power source for very long times without turning off/rebooting and it never failed to keep the charge so far. I also tried with the old battery and the phone behaves exactly the same way.
I used 3 different versions of Odin (1.87, 3.07 and 3.09) with only “Auto Reboot” and “F. Reset Time” options selected and every time I got the PASS message even though the phone keeps rebooting after the first reboot once the procedure is terminated.
To clarify one thing : when I said "it shows the TWRP splash screen but it reboots right after and this happened even after I flashed CWM" I meant to point out that it looks odd to see the TWRP splash screen (even for just a few seconds) after I just flashed CWM and that makes me think that I'm really not flashing anything here...
Thank you very much for taking the time of posting the links and I actually didn't try with that latest OH2 version.
I am downloading it right now (it takes a while from sammobile) and I will keep you posted on the outcome.
I will try to flash it via Odin and I'll also try the latest version mentioned on sammobile (Odin3_v3.10.7).
Regarding Kies I wasn't able to have it recognize the phone. I may be missing something but I tried updating drivers and going through all the guided procedures with no luck... If you say it should recognize the phone right away while in download mode then something is amiss.
Could you please confirm that I should also be able to use adb commands with the phone connected via USB in download mode? Cause that doesn't look like the case either...
Thank you again and I'll give updates here about my last attempts.
Sorry for the late reply...
Nothing changed by the way...
I am about to send the phone back to the seller who told me they'll try to fix it. Let's see how it goes.