So I rebooted into webos last night.. and this morning when I rebooted I didn't get the bootmenu.. worked other times but now not working. And just now I tried to power off the touchpad and when I hold the power button I don't get the "shut down" "airplaine Mode" options... or any.
I've got to be doing something stupid
ok I figured out the way to reboot it by holding the home and power.. but still I am getting no boot menu like before... is there a combo of buttons to hit for that?
alrighty.. guess I shoulda investigated a bit more before posting.. so I guess what it did was updated to 3.04 or whatever when it booted to webos.. and lost the boot menu.. just need to put the boot file back in and cmd.
Correct. You only need to reflash moboot using ACMEInstaller.
Create the cminstall folder again in the root directory and place the moboot zip in the folder. Then run novacom boot mem:// < ACMEInstaller
Related
I had installed TNT Lite v 4.3.0 a couple of weeks ago and it was working pretty good. But today my tablet has gone into a bad state. Every app that I run results in FC. Even the ADW launcher EX that I had selected default is crashing. It then gives me the options: ADW Laucher, ADW Launcher EX, and the regular Launcher. The plain ADW Launcher also fails, but fortunately the regular Launcher still works so I can access the apps.
But unfortunately almost every app that I am trying fails. The only one that doesn't fail is the Web browser. The Settings starts and I can access Applications menu but once I choose say System Applications, after that if I try to choose some other option such as Installed Application, it crashes as well.
Last night however when I started the tablet the battery was probably down and while it was powering it up, it turned off and then restarted by itself and then turned off, without reaching the lock screen. I don't know if it has something to do with all this.
What do I do now? Any help will be appreciated.
Thanks.
A well known issue.
http://forum.xda-developers.com/showthread.php?t=896395
This is why I'm an advocate of people doing the partitioning right before they flash their first custom rom. This way, they won't have to wipe everything later on.
I could only wonder why people aren't mentioning this in every custom rom thread.
Thank you so much. Will try it out tonight.
Unfortunately it seems I have run into a worse issue (without even doing anything yet). Now when I power it on, it starts and shuts off within a few seconds, just shows the birds for like 5 secs and bang, black screen.
The tablet is fully charged (if I put it on charge the light turns green in no time). Looks like the battery is dead.
You might be dropping into APX mode. Do you know how to use nvflash?
Thanks for the reply. You are absolutely right. After multiple tries it did boot up and I was able to install clockworkmod and it all worked great. It wiped off everything but I could live with that. And I turned it off and back on and it was working fine.
But then it went back into the same mode - shutting off immediately after turning on. I decided to return this tablet thinking that it is bad. But before I would do that I thought to restore it or else Viewsonic won't honor the warranty. So I started reading the thread about restoring the tablet to stock using nvram flash. In that procedure it requires me to put the tablet in APX mode and that's when I thought that maybe it is going into APX without pressing the volume - button.
Anyway I was successfully able to flash nvram. Or so it said. I still have the output from the batch file. But now my tablet is totally bricked. It does not boot at all. No pretty birds for me.
I hope there is some way out of it. Please help.
Edit: After re-flashing and using a different file, it seems to have made it a little better. At least I am seeing the birds again. But the original problem of shutting off, or going into the APX mode without pressing Volume button, has returned. All I am getting is the birds for a few seconds and then black screen. I will continue to retry, and if I see it booting up successfully to the stock, this thing is going back to the factory.
1) What image did you use to nvflash?
2) What happened when the flash was finished? Did it boot normally at least once?
3) Does the screen just stay dark all the time now?
1) First time nvflash_gtablet_46_2010112600.zip and after that it did not boot at all. Only black screen. I flashed it couple of times, no avail. Later I flashed nvflash_gtablet_2010110500.zip. This at least recovered it enough that it shows the birds, but soon after the screen turns black. I have confirmed that it is going in APX mode. If I have USB cable connected to my PC, the PC reports discovering the NVIDEA APX device.
2) It hasn't booted normally since I flashed nvram.
3) No I get the birds, but after that it turns dark.
Ok. Using Bekit's 1105 image...
1) Replace part9.img with the recovery.img out of the clockworkmod installation zip.
2) Put the tablet into APX mode.
3) Type in the command to start nvflash but before you hit the enter key hold down the Volume Up key and continue to hold it down until the flash finishes.
4) The tablet should boot into clockworkmod recovery.
5) Repartition 2048 and 0
6) Clear everything (cache, data and dalvik)
7) You might need to re-nvflash at this point.
Thanks for your response. I tried it. Did not work. When you say Replace part9.img with the recovery.img, does it mean copy recovery.img into the NVFlash directory and rename it to part9.img or leave it as recevery.img. I renamed it to part9.img and backed up the original part9.img to part9.img.tmp. The size of recovery.img and the original part9.img are very different. I am confused. Please help.
K J Rad said:
Ok. Using Bekit's 1105 image...
1) Replace part9.img with the recovery.img out of the clockworkmod installation zip.
2) Put the tablet into APX mode.
3) Type in the command to start nvflash but before you hit the enter key hold down the Volume Up key and continue to hold it down until the flash finishes.
4) The tablet should boot into clockworkmod recovery.
5) Repartition 2048 and 0
6) Clear everything (cache, data and dalvik)
7) You might need to re-nvflash at this point.
Click to expand...
Click to collapse
Yes, that is exactly what I meant.
Are you sure you're holding the volume UP key? Birds and then black screen is APX mode which is normally entered by holding volume DOWN.
Well it goes into APX mode even if I don't press any Volume button at all. That is the problem I am trying to fix. When I press power button (without touching the volume button) the birds come and then black screen. And this is APX mode because if I am connected to the PC it brings up an NVIDIA APX device on the PC.
Now if I press the Volume UP button along with the power button, nothing happens, not even the birds come up.
So the fact that the recovery.img (3.7k) is much smaller than part9.img (16k) is ok? Or I am doing something wrong.
Any ideas?
I was thinking about formatting the gtablet. Please let me know if this is the right move, or there is something else I could try first.
shah123 said:
Well it goes into APX mode even if I don't press any Volume button at all. That is the problem I am trying to fix. When I press power button (without touching the volume button) the birds come and then black screen. And this is APX mode because if I am connected to the PC it brings up an NVIDIA APX device on the PC.
Now if I press the Volume UP button along with the power button, nothing happens, not even the birds come up.
So the fact that the recovery.img (3.7k) is much smaller than part9.img (16k) is ok? Or I am doing something wrong.
Click to expand...
Click to collapse
A little more than "It did not work" would be helpful.
What step failed? Please tell me what happened after each step.
Did you get into CWM and repartition?
Did you get everything cleared?
What happened when it rebooted?
What was the original filename of the image you tried to flash?
What version of clockworkmod do you have installed?
Have you ever used ROM Manager?
All of this is important and no one can help you if you don't provide enough information.
Oh, I am sorry. Here are the answers to the questions you asked:
What step failed? Please tell me what happened after each step.
Ans: Out of the 7 steps you provided, the steps 1, 2 and 3 worked fine. It is the step 4 that failed (and of course I can't proceed with the steps anymore). In other words I cannot go into clockworkmod recovery.
Did you get into CWM and repartition?
Ans: No I was not able to do so. If I press power and Volume Up key at the same time, nothing happens, screen remains black, not even birds come up.
Did you get everything cleared?
Ans: I believe you are referring to step 6. No, I could not get to that step.
What happened when it rebooted?
Ans: Nothing showed up. Because when Volume Up is pressed while it is powered on, nothing shows up on the screen.
What was the original filename of the image you tried to flash?
Ans: Actually first time nvflash_gtablet_46_2010112600.zip (and this is before you provided the 7-step recipe - see post #6, 7, 8 of this thread) and after that it did not boot at all. Only black screen. I flashed it couple of times, no avail. Maybe that was my mistake. I chose a wrong file. Later I flashed nvflash_gtablet_2010110500.zip. This recovered it enough that it shows the birds now, but soon after the screen turns black (goes into APX mode).
What version of clockworkmod do you have installed?
Ans: v08
Have you ever used ROM Manager?
Ans: No. What is it?
I really appreciate your help.
What happened at the end of step 3?
Did you start holding the volume UP before you pressed the return key for the nvflash? If not... go back and do it again.
Did you continue to hold it until the flash was happening? You must continue to hold it down for at least 5 - 10 seconds after the flash starts.
When the flash was done did it say "Recovery Key detected" on the screen? If it didn't say this that is an indication that you didn't hold the volume UP key long enough.
If all of the above was done correctly and did happen but you didn't get to clockworkmod then what did you get? Did it look like stock recovery?
It sounds to me like you did the nvflash then tried to reboot into recovery.
Its unbelievable. Tonight when I powered it on it started booting up normal instead of going into the APX mode. I was glad. The stock UI came up, but some of my apps like Quadrant, File Expert etc were still there. It also notified me of the Update 3588. So I downloaded it and started installing it. Pretty soon it rebooted itself (sooner than I thought - I don't know if the remaining installation was supposed to happen after the reboot).
But instead of booting up into 3588 it is unfortunately gone back to the same old issue - the birds followed by black screen - aka APX mode. It never booted up after that. No matter how many times I tried to reboot, it goes into APX mode just like before. I don't know what caused it to complete bootup. One thing I noticed was that the battery was totally drained when I started tonight. I don't know if the drained battery somehow took it out of the APX mode. But now it has a little bit of charge because of hooking up to power supply. I have disconnected the power supply and will leave it in APX mode over night and try it again tomorrow when the battery would be totally drained and see if it boots up fully.
To answer your questions though:
What happened at the end of step 3?
The screen went black and after that it stayed black. No CWM.
Did you start holding the volume UP before you pressed the return key for the nvflash? If not... go back and do it again.
Yes, I did.
Did you continue to hold it until the flash was happening? You must continue to hold it down for at least 5 - 10 secondsafter the flash starts.
Yes, I continued to hold it all the way until the flash completed and the screen went black and quite some time after that.
When the flash was done did it say "Recovery Key detected" on the screen?
I don't think it did.
If it didn't say this that is an indication that you didn't hold the volume UP key long enough.
So I guess I need to give it another try. Tomorrow I will try to reboot the tablet again and if it continued to go into APX I will do the nvflash one more time.
If all of the above was done correctly and did happen but you didn't get to clockworkmod then what did you get? Did it look like stock recovery?
A black dark screen. No CWM or stock recovery.
It sounds to me like you did the nvflash then tried to reboot into recovery.
No at the time of nvflash I held the Volume UP button and nothing happened. Since then I have been trying to bootup or put it in CWM Recovery but only thing the tablet wants to do is go into APX mode.
So I guess my theory of "drained battery takes it out of the APX mode" is correct. I tried to reboot the tablet several times but it just kept on going into the APX mode until the battery was completely drained. And then it started booting up normally but it went into some installation (probably the stock 3588 that I had downloaded in the previous successful bootup). And then the green android with the exclamation sign came and the exclamation sign was rotating for a second or two and then stopped. And it looked like it was hung. I waited for a minute or two but nothing happened, so I pressed one of the buttons, I don't know if it was Menu or Back button, and all of a sudden clockworkmod recovery screen came up.
I have attached the picture of the screen. It still shows the green android with the exclamation sign in the middle of the screen, along with the CWM Recovery.
One other thing I noticed and I am not sure if it is normal is that if I choose say Reboot System Now from CWM menu and it shows like 10 entries with many No's and only one Yes. I can only use the volume Up + button to go down, if I try to go up using volume Down - button it does not go up. Is that normal? Is the only way to go is go down using Voume Up button in CWM menus? I have a feeling that my Volume Down button has gone crazy and it is not functioning properly and that is what is causing it to go into APX mode at the startup as well.
Anyway I first attempted "Apply SDCARD:update.zip" hoping that it might continue with the stock 3588 installation, but that failed. You can see the messages in the picture. Then I tried the Factory Reset and it was successful. I then rebooted the tablet. But now again it keeps on going up into APX mode. I will have to wait until tomorrow for it to completely drain battery again and then try to reboot again.
Any ideas? I know it is overwhelming and the behavior is very weird. At this point I am trying to bring it back to the stock firmware so that I can get this tablet replaced under warranty.
There are quite a few things that are not acting normal from what I see here.
Did you try to repartition 2048 and 0? If not, I would start with that then I would format everything and re-nvflash a stock ROM onto it. That might clear things up. If not you could be looking at a hardware reset.
I'm new to Android, my first step was to research hardware and functionality. The choice, you guest it, gtab!
Now of to the good stuff. I ultimately want to root and update my Rom to vegan5.1. So far I have downloaded cwv08, upload downgrade and vegan. The problem is that when I try to restart using power + volume +, I do see the open box screen but then it just loads tnt and resumes boot. There has to be a step I must be missing here. Like I said I'm new to grab and android. Where do I start?
To my understanding, power with volume + without cwm install will run the command file in recovery folder. Preharps u are missing the file, preharps u are not naming the file correctly; too little details provided to tell..
try reading : http://forum.xda-developers.com/showthread.php?t=865245
same box with green arrow
I too have installed clockwork. Downgrade the bootloader then try to reboot into clockwork using the + and power. The tab acts like it is going to enter recovery says "Detect recover key press
Booting to recovery image"
Then it goes to that screen with he box with a green down arrow coming out of it and a progress bar. When it finishes it reboots. Still at stock rom, no joy at all.
A couple things I have tried. Copying a new update.zip to the root of the internal memory and the sd card, reboot with and without the sdcard inserted, rebooting normal then trying to get reboot recovery with + and power, copying the cwm update and recovery folder into root. No joy each time it it is the update box. I have not tried holding the recovery keys down in the dark while chanting xda but I think I missed my chance for that working last Friday.... when is the next Friday the 13th?
Thanks for any help or insight anyone can give us.
Bednab,I could not have explained any better. This is exactly what happens with mine. Today I encountered another challenge. My gtab will not connect to my-fy on open iphone. I have to figure this out before my road trip next month.
and there was much rejoicing
I kept at this and finally found a solution. A post pointed me to the answer on androidforums about the command file getting deleted out of the recovery folder after a successful update. I opened the recovery folter on the g tab and it was empty so I opened the one from cwm and edited it to this:
--update_package=SDCARD2:/update.zip
This way it points to my external card where I had a few custom roms. Copied it to the recovery folder in the root of the gtab, reboot into recovery mode and much joy!
I installed clockworkmod per instructions.
When I press the on and volume up buttons I get the appropriate message and then the system boots with the tap n tap (ugh) rom.
I never see a clockworkmod menu
What am I doing wrong?
I am having the same issue!!! I am beyond frustrated right now. I have downgraded to 1.1 and had success during one try and from now on trying to boot into Clockwork it won't let me. All it does is say booting from kernal image and then goes to the splash screen then to the box with the down arrow and continues until it goes right back to the viewsonic birds and boots to the normal rom again.
What the He!! am I doing wrong here? I have already done a factory reset with data wipe...
Instructional video
See if this helps.
How to install Clockwork mid and tnt lite - Pensacola computers
http://www.youtube.com/watch?v=27oDBi-x760
argusvision said:
See if this helps.
How to install Clockwork mid and tnt lite - Pensacola computers
http://www.youtube.com/watch?v=27oDBi-x760
Click to expand...
Click to collapse
That is exactly what I was watching and following when this happened to me. Any other ideas? I did however just return the other one after clearing the data and got another one so I am going to try and avoid doing that again.. I am going to try and tread slowly here so I can get things right....
I've had 100% success using the instructions here:
http://forum.xda-developers.com/showthread.php?t=861950
Go to the first link (Dropbox) and, if Windows, download the 2 zipped files. I will say I bought a Viewsonic G tablet back in December and I had to used the older zipped file in the DEPRECATED folder. My latest Viewsonic G tablet works with the latest files.
Unzip the 2 files, combine into one folder, plug in the USB cable, and reboot by holding the POWER button *and* the Vol- button. You should see the initial boot screen but should quickly see a black screen. Run the .bat file (nvflash_gtablet.bat). If the computer doesn't see the tablet, read the above link on how to make sure you've installed the drivers for the tablet. Once the batch file ends, your tablet will automatically reboot. I would suggest powering off the tablet before it reboots as you can install CW_Mod via NVFlash, which is what I do. Grab CW_Mod 1.1 (not 1.2). Unzip the UPDATE.ZIP file and copy RECOVERY.IMG to the folder where you combined the 2 zipped files from Dropbox. Connect your tablet to your PC via the USB cable. Reboot the tablet again by pressing the POWER button while holding the Vol- button. Same thing--i.e. initial boot screen, then a black screen. Either create a batch file or run the following command (sorry cannot remember the thread where I found this, so I take no credit for this):
nvflash.exe --bl bootloader.bin --download 9 recovery.img
This is a quick process. Once the command finishes. Unplug your USB cable from your tablet and hold down the POWER button to turn off your tablet. You can either power it back on or power it back on and check to make sure CW_Mod is installed (recommended). For this, press the POWER button while holding down the Vol+ key until you see the line of text appear in the upper left hand corner of the screen.
Again, on one of my Viewsonic G tablets, I had to use the zipped file contained in the DEPRECATED folder on the Dropbox. I can't remember what the current files did (think soft-brick).
Good luck. As I've said, I've used these steps so many times as I went through every 1.1 ROM and 1.2 ROM trying to find the one I liked and the steps were perfect. At this point, though, while in CW_Mod, I would go through the process of partitioning your system and formatting stuff.
I might not have got enough sleep last night, so please excuse me if I missed this out right in the how to.. but I was up to 5 am last night putting Preware on my HP Touchpad and CM 2.1. The installing of Apps and playing in both ensued into the wee hours..
In my excitment I woke the wife.. and not thinking straight I thought I could get to the CWM via the same method as I used to building it. I pressed Vol Up and Power and it went back to USB bootie mode, and I couldnt get it out of that mode.. eventually I just reran the Acme installer. thewife went back to bed unimpressed.
So here is my question, I know how to boot from CM how via reboot into recovery mode, and then I can choose to boot to WebOS or CM. But from WebOS, how do I boot into Android? Or how do boot back into the Clock work menu so I can choose again ?
Thanks,
SorrowsTyr
.
There is an application in Preware called Cyboot that allows for what you want.
Or
You can install the patch that adds new buttons to the drop down power menu
Or
You can go to "Device Info" > "Reset Options" > Reboot
Yes! That us exactly what I want. Installed cyboot and Adv. Reset Options.
Thanjs!
Sent from my LG-P999 using XDA App
sorry for hijacking the thread,
but if i am stuck on the white usb screen, how do i get out of it?
Like for my phone, if i am in download mode i just take out the battery and restart my phone...but i dont we can remove battery in the Touchpad....
If you followed the instructions in the Dev section you should have installed Moboot, which give you the option to choose your OS when booting/rebooting.
viny2cool said:
sorry for hijacking the thread,
but if i am stuck on the white usb screen, how do i get out of it?
Like for my phone, if i am in download mode i just take out the battery and restart my phone...but i dont we can remove battery in the Touchpad....
Click to expand...
Click to collapse
Hold down power and home for about 30 sec.
Long story short, I messed up my phone while changing the partitions to EXT4.
EDIT: accidently clicked enter, let me finish the rest before posting!
My phone is more or less a brick now. When I boot up, it doesn't take me to the moto logo, instead I get a blank screen that looks something like this
Unlocked
PwrReason: SW_AP_RESET
OS will boot up in 5 seconds
Press a key to stop countdown
Available modes are:
1 RSD
2 Fastboot
3 NvFlash
yadada all you would find while normally booting while holding vol down.
-----------------------------------------------------------------------------
Volume up to select, volume down for next choice
Current choice mode is: (the mode I pick)
If I wait it out, it boots
Powering on BP
Cold-booting Linux
Reading ODM Fuse: 1
Then boots up normally - EXCEPT. my touch orientation is all off. It is lower then where I tap, For example I have to tap the menu button area to access the space bar while typing, and since the orientation is off, I cannot select the menu buttons.
I cannot flash a backup or a new rom because I cannot access my recovery, when I vol up on the android reocvery option it just scrolls down and resets the whole menu..
Help would be greatly appreciated, I am on a Bell Atrix, rooted/unlocked.
Another (possibly stupid) question, will factory resetting through setting->privacy brick my phone? I vaguely remember reading something stating that but I am not 100% sure if I read it wrong or something of the sort.
Update:
I have successfully flashed a sbf file but touch screen orientation is still off.. Any solutions?
Killer0Kevin said:
Update:
I have successfully flashed a sbf file but touch screen orientation is still off.. Any solutions?
Click to expand...
Click to collapse
This will fix your problem:
http://forum.xda-developers.com/showthread.php?t=1131649
+1 Beeboobop
I had the same problem yesterday and solved it that way ! http://forum.xda-developers.com/showthread.php?t=1427038
http://db.tt/mRStSurc { this is the pdsfix.img }
place it in the root of your sdcard
turn off phone turn it on
then choose early usb enumeration
now here is the hard part
open terminal emulator on your phone
if its not installed use this---+
http://db.tt/OKuCxXLt
on your pc go to android market
and get the free android terminal emulator download it to pc rename it
to app place in app folder of apk tool and follow the directions in the. exe
once it pushes terminal emulator to
your phone it will install it too
so just go into it and type /copy and paste this--//
su
dd if=/sdcard/pdsfix.img of=/dev/block/mmcblk0p3
if ya see an output like
49091-in
44027-out
2410436 transfered
then exit and reboot
choose early usb enumeration
boot up and the screen will be good as new
then just flash a boot.img in recovery
i have them too mske sure you use ext4
if your on ext4(like a cm7 or any of them
or use ext3 stock boot.img
Thanks guys, got it working