[Q] PLEASE HELP!! Lost hard buttons!! - Android Q&A, Help & Troubleshooting

HELLO!!
I downloaded button remapper and now all of my hardware heys on the lower part of the phone (Menu, home, search, Erc..) do not work.. I do not get any captivate feedback either. ITs like their completely gone..
I trired to restore old config from button remapper but its the same state.. Can someone please help me by directing me in the correct direction to get these working?
Fyi- The volume and power button works fine still... just the light up captivate buttons.
Thank you
!!

ssmr2t said:
HELLO!!
I downloaded button remapper and now all of my hardware heys on the lower part of the phone (Menu, home, search, Erc..) do not work.. I do not get any captivate feedback either. ITs like their completely gone..
I trired to restore old config from button remapper but its the same state.. Can someone please help me by directing me in the correct direction to get these working?
Fyi- The volume and power button works fine still... just the light up captivate buttons.
Thank you
!!
Click to expand...
Click to collapse
Honestly I say you will need to restore your phone to stock. You should be able to find instructions in your phones general or development threads

Restore your phone to previous state or restore backup.
There is a file in your system with this system is lost or overwritten. Restore will do.
Accidentally sent from my Google Nexus S using XDA Premium

Related

[Q] screen asleep during call

been having a problem with the 2.2 roms. I install them and the screen will go to sleep during a call, and the only way to wake it up is to either hang up the call or plug in the charging cord. The phone will wake normal when i flash back to a 2.1 rom. Does anyone have any ideas how to fix on froyo roms.
Enable trackball to wakeup under cyanogen settings or something like that.
press send + vol up (or vol down, believe it's vol up) to wake up phone. mods please move to q&a thread. thanks and hope this helps.
mjb413 said:
press send + vol up (or vol down, believe it's vol up) to wake up phone. mods please move to q&a thread. thanks and hope this helps.
Click to expand...
Click to collapse
You almost had it.
Press and hold vol+, then while holding that, press and release the send button. That will wake the screen without disturbing the call.
push this to system/usr/keylayout
http://www.multiupload.com/AFKG4K2IBB
sorry 5thagent. remembered seeing the instructions somewhere around. thanks for the correction! :-( i tried. I had forgotten about the other fix.
was just about to post on this today. thx for the infoz
Also... all you should have to do is pull the phone away from your face and it should turn back on almost immediately. I've never ever had this problem lol
Hungry Man said:
Also... all you should have to do is pull the phone away from your face and it should turn back on almost immediately. I've never ever had this problem lol
Click to expand...
Click to collapse
I agree that should normally work,but at least for me when using speaker phone I can't just move the phone to wake it. using trackball wake/unlock works fine though
Sent from my FroShedYo.V6 using XDA App
tazzpatriot said:
push this to system/usr/keylayout
http://www.multiupload.com/AFKG4K2IBB
Click to expand...
Click to collapse
What is that and what does it do?
How hard is it to program the ROM so that the screen turns back on when you touch it?
Hungry Man said:
Also... all you should have to do is pull the phone away from your face and it should turn back on almost immediately. I've never ever had this problem lol
Click to expand...
Click to collapse
this is how i test my roms callin 226 and it alwayz works
Hungry Man said:
Also... all you should have to do is pull the phone away from your face and it should turn back on almost immediately. I've never ever had this problem lol
Click to expand...
Click to collapse
That works but if you have your phone on the table in front of you w/speakerphone enabled while some robot is giving you 5 minutes of number equations, the phone will timeout. When the trackball wake option is selected in CyanogenMod settings/input settings, it will wake the device after you've manually turned the phone off but it doesn't wake the screen after it's timed out. I have been trying to use tasker as a way around this problem but I haven't been able to successfully write a working profile
Blma617 said:
That works but if you have your phone on the table in front of you w/speakerphone enabled while some robot is giving you 5 minutes of number equations, the phone will timeout. When the trackball wake option is selected in CyanogenMod settings/input settings, it will wake the device after you've manually turned the phone off but it doesn't wake the screen after it's timed out. I have been trying to use tasker as a way around this problem but I haven't been able to successfully write a working profile
Click to expand...
Click to collapse
just use the vol up + send?
playpolo4life said:
just use the vol up + send?
Click to expand...
Click to collapse
I was never aware of this method.. Thanks dude
Sent from my FroShedYo V10-ERIS using XDA App
playpolo4life said:
just use the vol up + send?
Click to expand...
Click to collapse
I'm bumping this thread because I have the same problem but my volume rocker is broken/missing so it is very difficult for me to press vol up/down. I need to use a pen tip or needle, which I usually do not have readily available.
Is there any other option out there for me? Why can't I use the trackball or just the Send key????????????
If anyone can help, I would greatly appreciate it.
FYI, I'm running GSB 1.4 (CM-7 Gingerbread based ROM).
edit: Some users on the CM forums said that pressing the Menu or Home keys worked, but that doesn't work for me. They were on CM6, so maybe that doesn't work in CM7, I don't know.
CrayzeeCarl said:
I'm bumping this thread because I have the same problem but my volume rocker is broken/missing so it is very difficult for me to press vol up/down. I need to use a pen tip or needle, which I usually do not have readily available.
Is there any other option out there for me? Why can't I use the trackball or just the Send key????????????
If anyone can help, I would greatly appreciate it.
FYI, I'm running GSB 1.4 (CM-7 Gingerbread based ROM).
edit: Some users on the CM forums said that pressing the Menu or Home keys worked, but that doesn't work for me. They were on CM6, so maybe that doesn't work in CM7, I don't know.
Click to expand...
Click to collapse
I seem to recall that in CM settings, you can configure what buttons can wake the phone up. You should be able to set it to the trackball.

Hero-Power Button problem

Hello guys. At first i´m so sorry for my bad english, so i´ll show you a video of my problem.
Phone - HTC Hero, Android 2,1
Video:
I can´t post outside links in my messages...
youtube. com/watch?v=V1BwQZsoKCk
It will not go to sleep mode when pressing the end/power key. But it still takes phone OUT of sleep mode, but now I have to wait for the screen timeout instead of pressing the button again.
I tried to find answer to my question, but i failed... I tried Reboot, Spare Parts - i don´t know if it worked properly, Hard reset, but the power button still not working properly.
Thank you! Marty
Restore you phone to the default setting and softares
Sent from my awesome X8 using Tapatalk
I tried that... No results
Marty Chill said:
I tried that... No results
Click to expand...
Click to collapse
Try to restore your phone to the default, or try to install a custom rom
Sent from my awesome X8 using Tapatalk
Now i did a ROOT and i try to flash in some ROMs but it still not works + it cancels my outcoming and incoming calls...
Sounds like you have a failing power button.. like I do.
It's a real pain in the ass... been looking for solutions for quite a while, besides physically replacing the circuit board the button is on...
I know this is old but for anybody researching the same problem... after trying MANY different apps for taking over power button tasks, the only real solution was to buy a replacement "Flex Cable" assembly on eBay. Takes some bravery to install but everything works now.
But that's just my experience.
I suppose that the simplest way out id button remapper that you can find hear at xda.
By using such software you can easily turn any of the other physical keys of your device into the power button.
lucaoldb said:
I suppose that the simplest way out id button remapper that you can find hear at xda.
By using such software you can easily turn any of the other physical keys of your device into the power button.
Click to expand...
Click to collapse
True, and they did work once the phone was up and running. However, when something went wrong on my rom and I needed to get into recovery to re-flash... I was SOL.
Yes, remapping is applied only after the kernel is loaded... So remapping is quite useless if the phone is switched off.

[Solved]Wake phone on volume keys

I know the Atrix and Photon are very similar, so has anyone tried this yet to wake the phone on the volume keys? My power button is getting annoying and would rather use the volume buttons. I'm not experienced enough to try this myself so hopefully someone can maybe get it working.
http://forum.xda-developers.com/showthread.php?t=1107041
EDIT:
Found out that Widget Locker from the market will do it with the correct settings. here is the link;
https://market.android.com/details?id=com.teslacoilsw.widgetlocker&feature=search_result
flawlessbmxr said:
I know the Atrix and Photon are very similar, so has anyone tried this yet to wake the phone on the volume keys? My power button is getting annoying and would rather use the volume buttons. I'm not experienced enough to try this myself so hopefully someone can maybe get it working.
http://forum.xda-developers.com/showthread.php?t=1107041
Click to expand...
Click to collapse
Yes Yes Yes.. I too would like to see volume rocker power without custom rom. but for the mean time try Button Savior on the market. You have to be rooted though.

Samsung GS2 ATT Kernals

Hello. I seem to have...messed my phone up a little when trying to root it. I ended up with the back and search button not working, and the home button works as the back button. I'm looking for the kernal to revert the button configuration back to ATT GS2 if anyone can help I would be amazingly thankful
Sodaru00 said:
Hello. I seem to have...messed my phone up a little when trying to root it. I ended up with the back and search button not working, and the home button works as the back button. I'm looking for the kernal to revert the button configuration back to ATT GS2 if anyone can help I would be amazingly thankful
Click to expand...
Click to collapse
There's an Odin/Heimdall-flashable return-to-stock in the dev section.

[Q] My Home button won't vibrate but the other buttons will?

Basically I installed Saurom Rom, and i've noticed that my home button doesn't vibrate when I press it anymore while the other capacitative buttons do. I've tried restoring to stock rom and that worked, but i'd like to keep Saurom for overclocking. Any ideas guys?
http://forum.xda-developers.com/showthread.php?t=1525341
Search next time or at least read the ROMs OP
its not hard
Ohp, my bad. But thank you!

Categories

Resources