please let the service manual
or tell me where is WiFi antenna in a streak.
Inside the Streak on the rear case, opposite from the headphone jack near the vibrator motor contact pad. You need to disassemble the Streak to get to the antenna.
Now...why do you need to know where the antennas are?
I analyzed the streak and then WiFi antenna reception was poor
I'm just an average mook, so in layman's terms, how do you expect to improve the reception quality?
Strephon Alkhalikoi said:
I'm just an average mook, so in layman's terms, how do you expect to improve the reception quality?
Click to expand...
Click to collapse
I think that broke the contact
You took your Streak apart to fix it and think you damaged the antenna contacts? Check the contacts on the motherboard rather than the antenna itself. The antenna leads are generally embedded into the plastic of the back and are difficult to damage.
Related
I disassembly X10 Change the covers. every thing is fine
But. Signals are weak now
I don't konw which part it's "antenna" for X10's Signals
I think maybe it's on my old covers...but i never see any part like antenna.
I don't konw .
So . who can tell me how to check the problem for Signals . Or which part it's "antenna"
Thanks
I find it...
WTF...
It's on my old covers .Very subtle
Pictures?
Cpt7, can you post a picture of the antenna on the back cover? I was going to sell my phone until i saw this. It explains why I'm seeing such a weak signal. How does the battery cover connect to the X10? is it via a small circular metal part in the lower right on the back of the phone?
I am sure most people on here would have noticed that the WiFi signal on the htc amaze is drastically affected by the use of a phone case...
This was a dreaded problem for me up until now...I found a way to boost my WiFi signal without sacrificing protection....
All I did was cut a little piece of aluminium foil and attach it to WiFi antenna located on the inner back panel of the phone.....The antenna is located next to the camera lens....
Once the foil is attached to the antenna, replace the back cover and you should have improved WiFi signal that instant.....Fill free to put on any phone case while surfing the internet at blazing fast speeds using WiFi....
Questions are welcomed if the procedure is not fully understood..
I noticed this when I put a d3o dual case on mine.. can u post pics of what you did?
Sent from my T-Mobile G1 using xda premium.. haha the amaze is at HTC getting a new screen..
I have attached a pic of the foil and its location on the back panel of the phone...
Wifi Signal and Cases
Anyone else try this?
Now that sucks, I bought this phone because of the luxurious look and feel (high class build quality). This is like putting rabbit ears on my 65 inch plasma (Ghetto). Just when I thought I was out they pull me back in (into the projects lol).
Don't forget that no one else knows the foil is there except you... A rabbits ear on a 65inches tv can't be hidden..
darll said:
Don't forget that no one else knows the foil is there except you... A rabbits ear on a 65inches tv can't be hidden..
Click to expand...
Click to collapse
Haha so true!
that is pretty ghetto but its hidden so if it works i guess you could consider it hardware hacking
Yeah mine is about 5mbs difference
Sent from my HTC Amaze 4G using xda premium
I have the d30 case and I never had a problem with wifi signal... have you ever thought that it was your internet provider or maybe your router?
iGoOsE76 said:
I have the d30 case and I never had a problem with wifi signal... have you ever thought that it was your internet provider or maybe your router?
Click to expand...
Click to collapse
Perhaps your router is not far from your phone that why... If there are few walls between your phone and router you will notice the problem..
This has nothing to do with internet provider or router..
Try covering the top of your phone when the d30 case is removed and see if your wifi signal drops... If it dosen't then you are too close to your router to notice the problem...
All the fol does is boost your wifi signal .. I have been using it for while and I have consistently got full wifi signal even when there are few walls between my device and the router,,,
Makes a difference, thank you
Bluetooth
I've also notice the same problem with the bluetooth radio. With a gummy cover on (silcone I believe) my moto bluetooth headset SD9-HD doesn't work worth a F*&k but without the cover it's all good.
Which is the BT antenne?
How about cell signal???
This trick reminded me of the old product called cell phone signal booster sticker. Here's a YouTube video http://youtu.be/Elgx7lp7YMc if you are not sure what I'm talking about.
If we can boost cell signal using your method, it would save battery as well (without spending too much money on this sticker). Any thought, guys?
Might be a contact issue, not a "this piece of aluminum foil is a better antenna." I'd posit that the two gold colored contacts are not making a solid electrical connection to the rear cover's antenna contacts and that the aluminum is helping by acting as a shim. But I could be wrong. For those of you with Wi-Fi issues, ever so carefully bend the little gold colored metal contacts on your phone upward to ensure solid contact with the rear of the case.
verkion
verkion said:
Might be a contact issue, not a "this piece of aluminum foil is a better antenna." I'd posit that the two gold colored contacts are not making a solid electrical connection to the rear cover's antenna contacts and that the aluminum is helping by acting as a shim. But I could be wrong. For those of you with Wi-Fi issues, ever so carefully bend the little gold colored metal contacts on your phone upward to ensure solid contact with the rear of the case.
verkion
Click to expand...
Click to collapse
Well the foil also helps the wifi signal retain its strength... Try covering the back of your phone using your hand and you will see that you loose all wireless signal unless you are close to the router..
Try the same procedure with the foil on and you will see that the wireless signal remains strong regardless of position
Wow, this little piece of aluminum actually works. However, it doesn't work 100% for me. My WiFi signal strength fluctuates quite a bit. But at least I can actually stay connected to my WiFi now.
Thanks. This is a great tip
Edit: this also fixed the problem my amaze had when connecting to my router at work. It would always say connected but data would never be exchanged.
Sent from my HTC_Amaze_4G using XDA App
I thought you were punking us. I was hesitant to even try, because I just KNEW this was a joke. But... it really does work!
I have had nothing buy buyers remorse since buying two of these Amaze phones (full retail price at a TMO store) - on a prepaid plan. They give you about 3 nanoseconds to return - and even then charge a $50/phone restocking fee.
Service is very poor in my home - which I knew before I bought. But, I assumed the Wifi calling would circumvent that problem. I was so disappointed with the jitter, stutter, lost packets, and overall piss-poor wifi call quality, that I upgraded my router, and installed a corporate-rated access point. There was some improvement, but nothing that rivaled a good cell call.
Best DL speeds were around 8-9mbps, and very erratic. With the foil, consistently 20mbps! I am completely dumbfounded.
If such poor wifi performance could be remedied by such a simple fix, why on earth does HTC not do this from the get go? It just doesn't make sense.
So, what have you guys done to keep the foil from shifting, or falling out when changing the battery?
OP, I luv you...
hooutoo said:
I've also notice the same problem with the bluetooth radio. With a gummy cover on (silcone I believe) my moto bluetooth headset SD9-HD doesn't work worth a F*&k but without the cover it's all good.
Which is the BT antenne?
Click to expand...
Click to collapse
Exactly my issue too. Maybe it'll work if we know which antenna it is.
I am aware of both the software and "Correct Hardware GPS Fix" threads, and have applied all of those (S.gps and antenna bend) to my Vibrant. GPS still isn't satisfactory IMHO. So...
Has anyone actually full out replaced the antenna contained in the internal black plastic cover with something that has a higher gain?
I am thinking of trying this, but not sure the specific antenna used in the Vibrant and so not sure what antennas I could swap in place. Does anyone know the spec?
Hey, can someone say me, where i could find the w-lan Aerial at my HTC Titan?
Greetings
Avelnal said:
Hey, can someone say me, where i could find the w-lan Aerial at my HTC Titan?
Greetings
Click to expand...
Click to collapse
What?!
Do you mean the Wifi Antenna?
Tachi91 said:
What?!
Do you mean the Wifi Antenna?
Click to expand...
Click to collapse
yes
Am pretty sure it is the two contacts at the top of the phone under the battey cover, If you are having problems make sure the contacts on the handset are prominent enough to make a good connection with the rear casing, Be careful not to snap them if they need bending etc.
AndyFZ1S said:
Am pretty sure it is the two contacts at the top of the phone under the battey cover, If you are having problems make sure the contacts on the handset are prominent enough to make a good connection with the rear casing, Be careful not to snap them if they need bending etc.
Click to expand...
Click to collapse
Thank You, I am trying it
Wifi/Bluetooth antennas tend to be at the top or the sides of a phone. With the actual cellular antenna being at the bottom.
FCC requires all mobile phones to have the cellular antenna farthest from the users head (health concerns). LTE being the strange exception mostly being near the top or the side.
Hello everyone i just bought htc amaze last week and i saw that there is a network problem with a lot of people and i heard about the aluminum foil trick so i said what the hell let`s give it a try it worked 200% and the funny thing is it also improve my WiFi strength so that is how i did it.
Tried, doesn't work. No improvement seen.
Sent from my HTC_Amaze_4G using Tapatalk 2
It does work (sometimes)
Petronoid said:
Tried, doesn't work. No improvement seen.
Sent from my HTC_Amaze_4G using Tapatalk 2
Click to expand...
Click to collapse
Putting aluminum foil on your back plate where the WiFi sensor is, is supposed to boost WiFi signal strength. I did a science project on it once, it actually worked. When you do it you need to make sure that the foil isn't crinkled or anything. It depends on everyone's phone, some get little to no improvement in signal.
I tested it again and it really improve the signal.
SuperAfnan said:
Putting aluminum foil on your back plate where the WiFi sensor is, is supposed to boost WiFi signal strength. I did a science project on it once, it actually worked. When you do it you need to make sure that the foil isn't crinkled or anything. It depends on everyone's phone, some get little to no improvement in signal.
Click to expand...
Click to collapse
Isn't the WiFi antenna on the other side of the camera, though?
Maybe this will help
sam_conrad said:
Isn't the WiFi antenna on the other side of the camera, though?
Click to expand...
Click to collapse
According to this thread, someone put the foil on the contact on the left of the camera piece and said they had significant improvements in WiFI signal.
We can infer that the WiFi chip is built into the back, and not the motherboard if WiFI doesn't work when the back is taken off. (Correct me if I'm wrong).
The foil is supposed to reflect the signal onto the contact piece, or motherboard. It doesn't really matter where the foil is as long as the trajectory leads to the actual wireless chip.
As Superafnan said, it improves Wifi signal, but you have to go the link which Superafnan mentioned.
You can't put the foil where you put in pictures. You should cover Wifi antenna
Off topic, if you cover your phone with the aluminum foil completely, you will lose operator's antenna
Good for fooling friends. You can tell them you were unreachable
antenna foil
antenna's in the back cover, thus loss of reception in removing it.
foil between the cover and phone body would either reflect signal to the antenna, or reflect it away, depending on the direction the antenna faces relative to the signal.
or cover your camera, or short the heck out of your phone or battery, depending where you put it.
How to Boost WiFi Signal with Aluminum Foil?
You could easily get better signals from your old router to your laptop using this life hack.
The steps are:
1. Find some Aluminum foil.
2. Find a small box (your router’s box will do the job).
3. Stick the foil on the surface of the box.
4. Create holes on the box to put the antenna in.
5. Put the box cover with aluminum foil onto the antenna.