Hi, I was using CM7 + Goldenleaf for about a week.
Today the screen got black. I had to remove battery and power up. But it stucks at CM7 boot animation. Few tries later it gone past the animation but the only thing that I can see was status bar, the rest of the screen is black, nothing works.
Now I get stuck at boot animation again.
I wasnt installing anything that might have caused it.
I thaught that its maybe SD card problem, because I use A2SD, but in recovery I can go to mass stroage USB and it sees my SD on PC.
I dont want to do full wipe, is there ant solution?
Thanks.
albert107 said:
Hi, I was using CM7 + Goldenleaf for about a week.
Today the screen got black. I had to remove battery and power up. But it stucks at CM7 boot animation. Few tries later it gone past the animation but the only thing that I can see was status bar, the rest of the screen is black, nothing works.
Now I get stuck at boot animation again.
I wasnt installing anything that might have caused it.
I thaught that its maybe SD card problem, because I use A2SD, but in recovery I can go to mass stroage USB and it sees my SD on PC.
I dont want to do full wipe, is there ant solution?
Thanks.
Click to expand...
Click to collapse
Without wiping anything flash the same rom (u said CM7) which is installed from custom recovery, and reboot, that must solve your problem.
Face it man, you might have to wipe everything and start over....do a backup when you get it working, 6.5.8 has intergrated gapps but the reason you experienced that black screen with status bar seems to me like you had a problem with a missing home launcher. Just redownload 6.5.8, gapps from mediafire,goldenleaf/fserve kernel.....wipe everything, flash 6.5.8,reboot, flash everything else
Sent from my LG-P500 using xda premium
Related
In recovery mode, everytime i click on "Software Update Via Update.pkg in SD card", screen goes black, i tried rebooting, factory reset, but problem persists..anyone there to help me out, i wanna install new ROM n its not working
anyone??
please....
Maybe you should flash recovery again. Try MultiRecoveryFlasher v.0.5 Win/Lin/Mac and choose your desired recovery.
Need help
sherrypizza said:
anyone??
please....
Click to expand...
Click to collapse
Same here, screen is black & after device disconecting the sreen i have gray screen whith colored flecks, will past foto later.When starting the device i have dell logo, when starting in fastboot mode i can see&press all the buttoms on the screen(all numbers&fastboot), wen i try to start my streak whith backcover opened i see the warning, its display batt charging logo & the % of battery, but never display screens from the android instaler or system*
*sorry for my english, its not my native
Please somebody help: its a damaged screen or its a bad flash/system?
My suggestion would be to flash a new recovery image and then flash a new ROM. Sounds like something has gotten corrupted.
cdzo72 said:
My suggestion would be to flash a new recovery image and then flash a new ROM. Sounds like something has gotten corrupted.
Click to expand...
Click to collapse
This. Or try a different recovery. Theres multiboot (havent tried), clockwork, and streakrecovery. Streak is awesome, but you may think you broke your phone until you tap the power button once in.
BlueCrystal said:
This. Or try a different recovery. Theres multiboot (havent tried), clockwork, and streakrecovery. Streak is awesome, but you may think you broke your phone until you tap the power button once in.
Click to expand...
Click to collapse
yes....streak is best....had the same problem till i flashed streakrecovery again....and then after you see the several dell logos flash after you reboot into recovery,and hit the power button once
So. I was on 1.4a of CherryBlur. Flashed the newest FULL WIPE with Webtop version 1.4d. Flashed using Tenfar's Recovery and it said flashing was successful. Now, when I turn the phone on, at the motorola logo screen, with "Dual Core Technology" below it, the screen starts flashing after a few seconds (about 20 seconds) and the white "Unlocked" in the top left of the screen is gone during the flashing. What the hell? I can still get into the recovery mode, but none of the options seem to help my problem, even the factory reset.
And a battery pull is the only way to get the screen to stop blinking and restart.
Any ideas? Could the download have been incomplete/corrupted?
Err0xx said:
So. I was on 1.4a of CherryBlur. Flashed the newest FULL WIPE with Webtop version 1.4d. Flashed using Tenfar's Recovery and it said flashing was successful. Now, when I turn the phone on, at the motorola logo screen, with "Dual Core Technology" below it, the screen starts flashing after a few seconds (about 20 seconds) and the white "Unlocked" in the top left of the screen is gone during the flashing. What the hell? I can still get into the recovery mode, but none of the options seem to help my problem, even the factory reset.
And a battery pull is the only way to get the screen to stop blinking and restart.
Any ideas? Could the download have been incomplete/corrupted?
Click to expand...
Click to collapse
Hold the volume down while the phone keeps restarting. Then try to enter recovery and do a wipe.
Ps: are you on tenfars cwm or rom managers cwm? Only tenfars cwm wipes data.
Sent from my MB860 using XDA Premium App
Aye. On Tenfar's and wipe did nothing for me.
Boot into recovery and reflash Cherryblur. Sounds like your other rom you downloaded didnt finish or is corrupted.
As unbelievable as it may sound, tried this. Have 3 different versions of CherryBlur saved on my SD Card. tried reflashing the newest version (1.4d FULL WIPE) about 5 times and even tried older versions (back to 1.2) out of desperation. All result in this same hang at the motorola screen. This is one of the most amazing things that I've seen. Something buggered royally.
My phone was running at about 60% battery last night, and working fine. It was in my pocket and it vibrated. I was unable to turn it on or reboot it, even after removing the battery. I tried using the battery from my wife's S2 but still no luck. I tried connecting the power supply but it still wouldn't boot so I left it charging overnight.
This morning it alternately flashed a fully green battery and a fully black battery. If I press and hold the power button it starts the boot process - I get past the Samsung splash screen and see the first "Resurrection Remix" splash screen, but then it reverts to displaying the green battery.
Any ideas for how I can revive the phone??
itm said:
My phone was running at about 60% battery last night, and working fine. It was in my pocket and it vibrated. I was unable to turn it on or reboot it, even after removing the battery. I tried using the battery from my wife's S2 but still no luck. I tried connecting the power supply but it still wouldn't boot so I left it charging overnight.
This morning it alternately flashed a fully green battery and a fully black battery. If I press and hold the power button it starts the boot process - I get past the Samsung splash screen and see the first "Resurrection Remix" splash screen, but then it reverts to displaying the green battery.
Any ideas for how I can revive the phone??
Click to expand...
Click to collapse
Ok We cant say its bricked!! Because its booting up but not coming to homescreen rite? Are u able to get into recovery or download mode?? If ur able o then wipe the data cache and dalvik cache, reinstall the ROM again.. If Recovery doesnt shw up.. Then Use ODIN to flash original fw!! Even if u still couldn get it.. Order a USB JIG from Ebay and try getting into DOWNLOAD MODE!! Even after this its still working means ITS BRICKED !!
Start download mode and the flash a new stock firmware . And your phone isnt bricked .!
This is why I always make a backup.
If you can get into download mode you can fix it, if you can't it's a service centre job. Pretty simple really.
Try cleaning charging port..
Sent from my GT-I9100 using XDA
Uh oh...I managed to get into Recovery mode, did a factory reset and kicked off a re-install of the Resurrection Remix ROM from the external SD and it's hung at 50% (for 10 mins now) - at the "Extracting /system..." stage. I daren't interrupt it.
Any ideas???
Yes stop messing
1: If you dint have to save anything, wipe better to full wipe
Flash a stock Rom using Odin, than start again with custom roms.
OR
2: download your custom Rom again and flash, might be corrupt download.
atifsh said:
Yes stop messing
1: If you dint have to save anything, wipe better to full wipe
Flash a stock Rom using Odin, than start again with custom roms.
OR
2: download your custom Rom again and flash, might be corrupt download.
Click to expand...
Click to collapse
So it's OK to interrupt this ROM flash, even though it's stuck at 50%? Should I just hold the power button or remove the battery??
pull the battery
But I say flash stock Rom first, lengthy procedure I know, but safer
OK I decided to reflash RR 2.3, which had been running fine for a couple of weeks previously. Immediately after flashing (which worked OK) the boot process wouldn't complete - it got as far as the RR splash screen then died (screen blank, and needed a long press on the power button to restart).
This happened several times. Eventually I removed and replaced the battery and it finally booted.
Does this sound like a hardware problem? I've noticed that the phone often runs quite warm, but I don't know if that's normal.
You have to flash stock rom, only way to know if there is something wrong with your phone, run it for couple days.
Now to the heat issue, it is due to
1: modem
2: kernel
3: both
Hi there, about a month ago my X10 Mini started doing weird thing. After reboot the screen is blank (black) and the notification LED is flashing red. There is no response to any keypress, nothing. The only option to turn off the phone is to disconnect the battery (under the rubber cover at the back). Then when I want to turn on the phone, again the same problem - blank screen and red notification LED. The only option to do something is to boot into recovery and flash/reflash ROM. Erasing cache/data wont help, only new ROM. And now, I reflashed the ROM, it started. I needed to reboot (inserted SIM card) and again, blank scree, red notification LED and no response.
The recovery is working fine so maybe the problem is in the kernel? Why? I was using this phone for more than a half year and without problem.
Specs: bootloader unlocked, nAa kernel, CWM recovery, ROM now GingerRobyn V04 (before MiniCM7)
//Just flashed latest nAa kernel - nothing new happened....
///There is something ****ed up in this phone. A few more times I reflashed the kernel and ROM, tryed stock ROM and kernel and its weird. When I restart the phone and do nothing - red LED. But when I restart the phone and Im constantly pushing the back key (as when I want to get into recovery) but stop pushing right when the screen lights up (only backlight), the kernel logo appears and it didnt go into recovery, but normally boots up into ROM. When I push the back button further when the screen lights up, it normally goes into recovery. And in the recovery if I go "reboot" or "turn off", when turning on the phone without pressing the back button until screen flashes up (then stop), it wont start, just red notification LED.
I wanna sell this phone so I need to fix this. Everything is working except this thing...
////Probably its not kernel or ROM based. Tryed nAa 13/14, stock and nAa JB 3 kernel - nothing changedm still b!tch!ng. Tryed stock ROM, MiniCM, GingerSony, Jelly Bean ROM - nothing changed.
Hi,
try plugging in your sdcard and then powering on you phone. Also make sure your battery has got some juice.
Good luck.
Sent from my Galaxy Nexus using xda app-developers app
nobodyAtall said:
Hi,
try plugging in your sdcard and then powering on you phone. Also make sure your battery has got some juice.
Good luck.
Sent from my Galaxy Nexus using xda app-developers app
Click to expand...
Click to collapse
Thanks! The MicroSD actually worked. Any idea why? When booting up, kernel/recovery/ROM needs to write something in it?
This is a known kernel bug.
Sent from my Galaxy Nexus using xda app-developers app
Thanks. I had the same problem.
Hello! My brother gave me this phone to repair it kind of. It is fully stock, and when I try to turn it on it either restarts on white screen, or restarts after when the home screen shows up. I went to rooting guides for the phone, and I only unlocked the bootloader. Problem now is that because of the restarts I can't put superuser.zip and cwm img on sdcard since I can't turn on the phone and connect with sdcard. Oh and I did factory reset twice it didn't fix it. Is there any way to fix the phone?
Well now I succeded installing new rom and recovery from SDcard because I put SDcard in another phone. Thing is even now the device turns on gets to customization screen and then it restarts and it has infinite loop. What to do?
Make sure battery is fully charged/ good
Bootloops can sometimes be fixed by flashing boot.IMG through fastboot...but I don't think that's your issue
Sent from my Evo V 4G using XDA Free mobile app